| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 5f89154e8e9e3445f9b59 ("block: Use enum to define RQF_x bit
indexes") converted the RQF flags to an anonymous enum, which was
a beneficial change. This patch goes one step further by naming the enum
as "rqf_flags".
This naming enables exporting these flags to BPF clients, eliminating
the need to duplicate these flags in BPF code. Instead, BPF clients can
now access the same kernel-side values through CO:RE (Compile Once, Run
Everywhere), as shown in this example:
rqf_stats = bpf_core_enum_value(enum rqf_flags, __RQF_STATS)
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20250306-rqf_flags-v1-1-bbd64918b406@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There's no point in doing copygc on non-rw devices: the fragmentation
doesn't matter if we're not writing to them, and we may not have
anywhere to put the data on our other devices.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, we fixed journal resize spuriousl failing with
-BCH_ERR_open_buckets_empty, but initial journal allocation was missed
because it didn't invoke the "block on allocator" loop at all.
Factor out the "loop on allocator" code to fix that.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The 5-level paging code parses the command line to look for the 'no5lvl'
string, and does so very early, before sanitize_boot_params() has been
called and has been given the opportunity to wipe bogus data from the
fields in boot_params that are not covered by struct setup_header, and
are therefore supposed to be initialized to zero by the bootloader.
This triggers an early boot crash when using syslinux-efi to boot a
recent kernel built with CONFIG_X86_5LEVEL=y and CONFIG_EFI_STUB=n, as
the 0xff padding that now fills the unused PE/COFF header is copied into
boot_params by the bootloader, and interpreted as the top half of the
command line pointer.
Fix this by sanitizing the boot_params before use. Note that there is no
harm in calling this more than once; subsequent invocations are able to
spot that the boot_params have already been cleaned up.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org> # v6.1+
Link: https://lore.kernel.org/r/20250306155915.342465-2-ardb+git@google.com
Closes: https://lore.kernel.org/all/202503041549.35913.ulrich.gemkow@ikr.uni-stuttgart.de
|
|
This was another case that Rasmus pointed out where the direct access to
the pipe head and tail pointers broke on 32-bit configurations due to
the type changes.
As with the pipe FIONREAD case, fix it by using the appropriate helper
functions that deal with the right pipe index sizing.
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Link: https://lore.kernel.org/all/878qpi5wz4.fsf@prevas.dk/
Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")Cc: Oleg >
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rasmus points out that we do indeed have other cases of breakage from
the type changes that were introduced on 32-bit targets in order to read
the pipe head and tail values atomically (commit 3d252160b818: "fs/pipe:
Read pipe->{head,tail} atomically outside pipe->mutex").
Fix it up by using the proper helper functions that now deal with the
pipe buffer index types properly. This makes the code simpler and more
obvious.
The compiler does the CSE and loop hoisting of the pipe ring size
masking that we used to do manually, so open-coding this was never a
good idea.
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Link: https://lore.kernel.org/all/87cyeu5zgk.fsf@prevas.dk/
Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
That's what 'pipe_full()' does, so it's more consistent. But more
importantly it gets the type limits right when the pipe head and tail
are no longer necessarily 'unsigned int'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
of_parse_phandle_with_fixed_args() requires its caller to
call into of_node_put() on the node pointer from the output
structure, but such a call is currently missing.
Call into of_node_put() to rectify that.
Fixes: 159f8a0209af ("gpio-rcar: Add DT support")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250305163753.34913-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add btrfs_free_chunk_map() to free the memory allocated
by btrfs_alloc_chunk_map() if btrfs_add_chunk_map() fails.
Fixes: 7dc66abb5a47 ("btrfs: use a dedicated data structure for chunk maps")
CC: stable@vger.kernel.org
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add missing skb_dst_drop() to drop reference to the old dst before
adding the new dst to the skb.
Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250305081655.19032-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch follows commit 92191dd10730 ("net: ipv6: fix dst ref loops in
rpl, seg6 and ioam6 lwtunnels") and, on a second thought, the same patch
is also needed for ila (even though the config that triggered the issue
was pathological, but still, we don't want that to happen).
Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250304181039.35951-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
daddr can be NULL if there is no neighbour table entry present,
in that case the tx packet should be dropped.
saddr will usually be set by MCTP core, but check for NULL in case a
packet is transmitted by a different protocol.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver")
Link: https://patch.msgid.link/20250304-mctp-i3c-null-v1-1-4416bbd56540@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
By default fair_server dl_server allocates 5% of the bandwidth to the root
domain. Due to this writing any value less than 5% fails due to -EBUSY:
$ cat /proc/sys/kernel/sched_rt_period_us
1000000
$ echo 49999 > /proc/sys/kernel/sched_rt_runtime_us
-bash: echo: write error: Device or resource busy
$ echo 50000 > /proc/sys/kernel/sched_rt_runtime_us
$
Since the sched_rt_runtime_us allows -1 as the minimum, put this
restriction in the documentation.
One should check average of runtime/period in
/sys/kernel/debug/sched/fair_server/cpuX/* for exact value.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20250306052954.452005-3-sshegde@linux.ibm.com
|
|
The ftrace selftest reported a failure because writing -1 to
sched_rt_runtime_us returns -EBUSY. This happens when the possible
CPUs are different from active CPUs.
Active CPUs are part of one root domain, while remaining CPUs are part
of def_root_domain. Since active cpumask is being used, this results in
cpus=0 when a non active CPUs is used in the loop.
Fix it by looping over the online CPUs instead for validating the
bandwidth calculations.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20250306052954.452005-2-sshegde@linux.ibm.com
|
|
It is already difficult for users to troubleshoot which of multiple pid
limits restricts their workload. The per-(hierarchical-)NS pid_max would
contribute to the confusion.
Also, the implementation copies the limit upon creation from
parent, this pattern showed cumbersome with some attributes in legacy
cgroup controllers -- it's subject to race condition between parent's
limit modification and children creation and once copied it must be
changed in the descendant.
Let's do what other places do (ucounts or cgroup limits) -- create new
pid namespaces without any limit at all. The global limit (actually any
ancestor's limit) is still effectively in place, we avoid the
set/unshare race and bumps of global (ancestral) limit have the desired
effect on pid namespace that do not care.
Link: https://lore.kernel.org/r/20240408145819.8787-1-mkoutny@suse.com/
Link: https://lore.kernel.org/r/20250221170249.890014-1-mkoutny@suse.com/
Fixes: 7863dcc72d0f4 ("pid: allow pid_max to be set per pid namespace")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20250305145849.55491-1-mkoutny@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The recent rewrite with the use of regular atomic helpers broke the
DPMS unblanking on X11. Fix it by moving the call of
bochs_hw_blank(false) from CRTC mode_set_nofb() to atomic_enable().
Fixes: 2037174993c8 ("drm/bochs: Use regular atomic helpers")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1238209
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304134203.20534-1-tiwai@suse.de
|
|
On MMIO devices (e.g. MT7988 or EN7581) unicast traffic received on lanX
port is flooded on all other user ports if the DSA switch is configured
without VLAN support since PORT_MATRIX in PCR regs contains all user
ports. Similar to MDIO devices (e.g. MT7530 and MT7531) fix the issue
defining default VLAN-ID 0 for MT7530 MMIO devices.
Fixes: 110c18bfed414 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/20250304-mt7988-flooding-fix-v1-1-905523ae83e9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The IOPOLL path posts CQEs when the io_kiocb is marked as completed,
so it cannot rely on the usual retry that non-IOPOLL requests do for
read/write requests.
If -EAGAIN is received and the request should be retried, go through
the normal completion path and let the normal flush logic catch it and
reissue it, like what is done for !IOPOLL reads or writes.
Fixes: d803d123948f ("io_uring/rw: handle -EAGAIN retry at IO completion time")
Reported-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/io-uring/2b43ccfa-644d-4a09-8f8f-39ad71810f41@oracle.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If userptr pages are freed after a call to the xe mmu notifier,
the device will not be blocked out from theoretically accessing
these pages unless they are also unmapped from the iommu, and
this violates some aspects of the iommu-imposed security.
Ensure that userptrs are unmapped in the mmu notifier to
mitigate this. A naive attempt would try to free the sg table, but
the sg table itself may be accessed by a concurrent bind
operation, so settle for only unmapping.
v3:
- Update lockdep asserts.
- Fix a typo (Matthew Auld)
Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr")
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304173342.22009-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit ba767b9d01a2c552d76cf6f46b125d50ec4147a6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The pnfs that we obtain from hmm_range_fault() point to pages that
we don't have a reference on, and the guarantee that they are still
in the cpu page-tables is that the notifier lock must be held and the
notifier seqno is still valid.
So while building the sg table and marking the pages accesses / dirty
we need to hold this lock with a validated seqno.
However, the lock is reclaim tainted which makes
sg_alloc_table_from_pages_segment() unusable, since it internally
allocates memory.
Instead build the sg-table manually. For the non-iommu case
this might lead to fewer coalesces, but if that's a problem it can
be fixed up later in the resource cursor code. For the iommu case,
the whole sg-table may still be coalesced to a single contigous
device va region.
This avoids marking pages that we don't own dirty and accessed, and
it also avoid dereferencing struct pages that we don't own.
v2:
- Use assert to check whether hmm pfns are valid (Matthew Auld)
- Take into account that large pages may cross range boundaries
(Matthew Auld)
v3:
- Don't unnecessarily check for a non-freed sg-table. (Matthew Auld)
- Add a missing up_read() in an error path. (Matthew Auld)
Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr")
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304173342.22009-3-thomas.hellstrom@linux.intel.com
(cherry picked from commit ea3e66d280ce2576664a862693d1da8fd324c317)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add proper #ifndef around the xe_hmm.h header, proper spacing
and since the documentation mostly follows kerneldoc format,
make it kerneldoc. Also prepare for upcoming -stable fixes.
Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr")
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Matthew Brost <Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304173342.22009-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit bbe2b06b55bc061c8fcec034ed26e88287f39143)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Concurrent VM bind staging and zapping of PTEs from a userptr notifier
do not work because the view of PTEs is not stable. VM binds cannot
acquire the notifier lock during staging, as memory allocations are
required. To resolve this race condition, use a staging tree for VM
binds that is committed only under the userptr notifier lock during the
final step of the bind. This ensures a consistent view of the PTEs in
the userptr notifier.
A follow up may only use staging for VM in fault mode as this is the
only mode in which the above race exists.
v3:
- Drop zap PTE change (Thomas)
- s/xe_pt_entry/xe_pt_entry_staging (Thomas)
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org>
Fixes: e8babb280b5e ("drm/xe: Convert multiple bind ops into single job")
Fixes: a708f6501c69 ("drm/xe: Update PT layer with better error handling")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228073058.59510-5-thomas.hellstrom@linux.intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
(cherry picked from commit 6f39b0c5ef0385eae586760d10b9767168037aa5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Fix fault mode invalidation racing with unbind leading to the
PTE zapping potentially traversing an invalid page-table tree.
Do this by holding the notifier lock across PTE zapping. This
might transfer any contention waiting on the notifier seqlock
read side to the notifier lock read side, but that shouldn't be
a major problem.
At the same time get rid of the open-coded invalidation in the bind
code by relying on the notifier even when the vma bind is not
yet committed.
Finally let userptr invalidation call a dedicated xe_vm function
performing a full invalidation.
Fixes: e8babb280b5e ("drm/xe: Convert multiple bind ops into single job")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228073058.59510-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit 100a5b8dadfca50d91d9a4c9fc01431b42a25cab)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Fix a (harmless) misplaced #endif leading to declarations
appearing multiple times.
Fixes: 0eb2a18a8fad ("drm/xe: Implement VM snapshot support for BO's and userptr")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228073058.59510-3-thomas.hellstrom@linux.intel.com
(cherry picked from commit fcc20a4c752214b3e25632021c57d7d1d71ee1dd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If a userptr vma subject to prefetching was already invalidated
or invalidated during the prefetch operation, the operation would
repeatedly return -EAGAIN which would typically cause an infinite
loop.
Validate the userptr to ensure this doesn't happen.
v2:
- Don't fallthrough from UNMAP to PREFETCH (Matthew Brost)
Fixes: 5bd24e78829a ("drm/xe/vm: Subclass userptr vmas")
Fixes: 617eebb9c480 ("drm/xe: Fix array of binds")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228073058.59510-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 03c346d4d0d85d210d549d43c8cfb3dfb7f20e0a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Laptop uses 2 CS35L41 Amps with HDA, using External boost with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-8-sbinding@opensource.cirrus.com
|
|
Add support for ASUS B5605CCA and B5405CCA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-7-sbinding@opensource.cirrus.com
|
|
Add support for ASUS B3405CCA / P3405CCA, B3605CCA / P3605CCA,
B3405CCA, B3605CCA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-6-sbinding@opensource.cirrus.com
|
|
Add support for ASUS B3405CVA, B5405CVA, B5605CVA, B3605CVA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-5-sbinding@opensource.cirrus.com
|
|
Add support for ASUS G614PH/PM/PP and G614FH/FM/FP.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-4-sbinding@opensource.cirrus.com
|
|
Add support for ASUS GA603KP, GA603KM and GA603KH.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-3-sbinding@opensource.cirrus.com
|
|
Add support for ASUS G814PH/PM/PP and G814FH/FM/FP.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-2-sbinding@opensource.cirrus.com
|
|
The kernel_recvmsg() function returns an int which could be either
negative error codes or the number of bytes received. The problem is
that the condition:
if (ret < sizeof(*icresp)) {
is type promoted to type unsigned long and negative values are treated
as high positive values which is success, when they should be treated as
failure. Handle invalid positive returns separately from negative
error codes to avoid this problem.
Fixes: 578539e09690 ("nvme-tcp: fix connect failure on receiving partial ICResp PDU")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
While looking for incorrect users of the pipe head/tail fields (see
commit c27c66afc449: "fs/pipe: Fix pipe_occupancy() with 16-bit
indexes"), I found a bug in pipe_discard_from() that looked entirely
broken.
However, the fix is trivial: this buggy function isn't actually called
by anything, so let's just remove it ASAP.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
always allow ih interrupt from fw on smu v14 based on
the interface requirement
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a3199eba46c54324193607d9114a1e321292d7a1)
Cc: stable@vger.kernel.org # 6.12.x
|
|
num_gb_pipes was set to a wrong value using r420_pipe_config
This have lead to HyperZ glitches on fast Z clearing.
Closes: https://bugs.freedesktop.org/show_bug.cgi?id=110897
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Richard Thier <u9vata@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 044e59a85c4d84e3c8d004c486e5c479640563a6)
Cc: stable@vger.kernel.org
|
|
Add htmldoc annotation for the newly introduced "head_tail" member
describing it to be a union of the pipe_inode_info's @head and @tail
members.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20250305204609.5e64768e@canb.auug.org.au/
Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The pipe_occupancy() logic implicitly relied on the natural unsigned
modulo arithmetic in C, but that doesn't work for the new 'pipe_index_t'
case, since any arithmetic will be done in 'int' (and here we had also
made it 'unsigned int' due to the function call boundary).
So make the modulo arithmetic explicit by casting the result to the
proper type.
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/all/CAHk-=wjyHsGLx=rxg6PKYBNkPYAejgo7=CbyL3=HGLZLsAaJFQ@mail.gmail.com/
Fixes: 3d252160b818 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Through KFD IOCTL Fuzzing we encountered a NULL pointer derefrence
when calling kfd_queue_acquire_buffers.
Fixes: 629568d25fea ("drm/amdkfd: Validate queue cwsr area and eop buffer size")
Signed-off-by: Andrew Martin <Andrew.Martin@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Andrew Martin <Andrew.Martin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 049e5bf3c8406f87c3d8e1958e0a16804fa1d530)
Cc: stable@vger.kernel.org
|
|
Null pointer dereference issue could occur when pipe_ctx->plane_state
is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not
null before accessing. This prevents a null pointer dereference.
Found by code review.
Fixes: 3be5262e353b ("drm/amd/display: Rename more dc_surface stuff to plane_state")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 63e6a77ccf239337baa9b1e7787cde9fa0462092)
Cc: stable@vger.kernel.org
|
|
child_cfs_rq_on_list attempts to convert a 'prev' pointer to a cfs_rq.
This 'prev' pointer can originate from struct rq's leaf_cfs_rq_list,
making the conversion invalid and potentially leading to memory
corruption. Depending on the relative positions of leaf_cfs_rq_list and
the task group (tg) pointer within the struct, this can cause a memory
fault or access garbage data.
The issue arises in list_add_leaf_cfs_rq, where both
cfs_rq->leaf_cfs_rq_list and rq->leaf_cfs_rq_list are added to the same
leaf list. Also, rq->tmp_alone_branch can be set to rq->leaf_cfs_rq_list.
This adds a check `if (prev == &rq->leaf_cfs_rq_list)` after the main
conditional in child_cfs_rq_on_list. This ensures that the container_of
operation will convert a correct cfs_rq struct.
This check is sufficient because only cfs_rqs on the same CPU are added
to the list, so verifying the 'prev' pointer against the current rq's list
head is enough.
Fixes a potential memory corruption issue that due to current struct
layout might not be manifesting as a crash but could lead to unpredictable
behavior when the layout changes.
Fixes: fdaba61ef8a2 ("sched/fair: Ensure that the CFS parent is added after unthrottling")
Signed-off-by: Zecheng Li <zecheng@google.com>
Reviewed-and-tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250304214031.2882646-1-zecheng@google.com
|
|
The utf16_le_to_7bit function claims to, naively, convert a UTF-16
string to a 7-bit ASCII string. By naively, we mean that it:
* drops the first byte of every character in the original UTF-16 string
* checks if all characters are printable, and otherwise replaces them
by exclamation mark "!".
This means that theoretically, all characters outside the 7-bit ASCII
range should be replaced by another character. Examples:
* lower-case alpha (ɒ) 0x0252 becomes 0x52 (R)
* ligature OE (œ) 0x0153 becomes 0x53 (S)
* hangul letter pieup (ㅂ) 0x3142 becomes 0x42 (B)
* upper-case gamma (Ɣ) 0x0194 becomes 0x94 (not printable) so gets
replaced by "!"
The result of this conversion for the GPT partition name is passed to
user-space as PARTNAME via udev, which is confusing and feels questionable.
However, there is a flaw in the conversion function itself. By dropping
one byte of each character and using isprint() to check if the remaining
byte corresponds to a printable character, we do not actually guarantee
that the resulting character is 7-bit ASCII.
This happens because we pass 8-bit characters to isprint(), which
in the kernel returns 1 for many values > 0x7f - as defined in ctype.c.
This results in many values which should be replaced by "!" to be kept
as-is, despite not being valid 7-bit ASCII. Examples:
* e with acute accent (é) 0x00E9 becomes 0xE9 - kept as-is because
isprint(0xE9) returns 1.
* euro sign (€) 0x20AC becomes 0xAC - kept as-is because isprint(0xAC)
returns 1.
This way has broken pyudev utility[1], fixes it by using a mask of 7 bits
instead of 8 bits before calling isprint.
Link: https://github.com/pyudev/pyudev/issues/490#issuecomment-2685794648 [1]
Link: https://lore.kernel.org/linux-block/4cac90c2-e414-4ebb-ae62-2a4589d9dc6e@canonical.com/
Cc: Mulhern <amulhern@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: stable@vger.kernel.org
Signed-off-by: Olivier Gayot <olivier.gayot@canonical.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250305022154.3903128-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The parameters set by the set_params call are only applied to the block
device in the start_dev call. So if a device has already been started, a
subsequently issued set_params on that device will not have the desired
effect, and should return an error. There is an existing check for this
- set_params fails on devices in the LIVE state. But this check is not
sufficient to cover the recovery case. In this case, the device will be
in the QUIESCED or FAIL_IO states, so set_params will succeed. But this
success is misleading, because the parameters will not be applied, since
the device has already been started (by a previous ublk server). The bit
UB_STATE_USED is set on completion of the start_dev; use it to detect
and fail set_params commands which arrive too late to be applied (after
start_dev).
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Fixes: 0aa73170eba5 ("ublk_drv: add SET_PARAMS/GET_PARAMS control command")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250304-set_params-v1-1-17b5e0887606@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When I read through the TSO codes, I found out that we probably
miss initializing the tx_flags of last seg when TSO is turned
off, which means at the following points no more timestamp
(for this last one) will be generated. There are three flags
to be handled in this patch:
1. SKBTX_HW_TSTAMP
2. SKBTX_BPF
3. SKBTX_SCHED_TSTAMP
Note that SKBTX_BPF[1] was added in 6.14.0-rc2 by commit
6b98ec7e882af ("bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback")
and only belongs to net-next branch material for now. The common
issue of the above three flags can be fixed by this single patch.
This patch initializes the tx_flags to SKBTX_ANY_TSTAMP like what
the UDP GSO does to make the newly segmented last skb inherit the
tx_flags so that requested timestamp will be generated in each
certain layer, or else that last one has zero value of tx_flags
which leads to no timestamp at all.
Fixes: 4ed2d765dfacc ("net-timestamp: TCP timestamping")
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a check for invalid data size to avoid corrupted filesystem
from being further corrupted.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
When generic_write_checks() returns zero, it means that
iov_iter_count() is zero, and there is no work to do.
Simply return success like all other filesystems do, rather than
proceeding down the write path, which today yields an -EFAULT in
generic_perform_write() via the
(fault_in_iov_iter_readable(i, bytes) == bytes) check when bytes
== 0.
Fixes: 11a347fb6cef ("exfat: change to get file size from DataLength")
Reported-by: Noah <kernel-org-10@maxgrass.eu>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
bitmap clear loop will take long time in __exfat_free_cluster()
if data size of file/dir enty is invalid.
If cluster bit in bitmap is already clear, stop clearing bitmap go to
out of loop.
Fixes: 31023864e67a ("exfat: add fat entry operations")
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>, Jiaji Qin <jjtan24@m.fudan.edu.cn>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
This commit fixes the condition for allocating cluster to parent
directory to avoid allocating new cluster to parent directory when
there are just enough empty directory entries at the end of the
parent directory.
Fixes: af02c72d0b62 ("exfat: convert exfat_find_empty_entry() to use dentry cache")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Use raw_spinlock in order to fix spurious messages about invalid context
when spinlock debugging is enabled. The lock is only used to serialize
register access.
[ 4.239592] =============================
[ 4.239595] [ BUG: Invalid wait context ]
[ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted
[ 4.239603] -----------------------------
[ 4.239606] kworker/u8:5/76 is trying to lock:
[ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164
[ 4.239641] other info that might help us debug this:
[ 4.239643] context-{5:5}
[ 4.239646] 5 locks held by kworker/u8:5/76:
[ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c
[ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value.
[ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c
[ 4.254109] #2: ffff00000920c8f8
[ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value.
[ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc
[ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690
[ 4.264840] #4:
[ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value.
[ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690
[ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz
[ 4.304082] stack backtrace:
[ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35
[ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
[ 4.304097] Workqueue: async async_run_entry_fn
[ 4.304106] Call trace:
[ 4.304110] show_stack+0x14/0x20 (C)
[ 4.304122] dump_stack_lvl+0x6c/0x90
[ 4.304131] dump_stack+0x14/0x1c
[ 4.304138] __lock_acquire+0xdfc/0x1584
[ 4.426274] lock_acquire+0x1c4/0x33c
[ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80
[ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164
[ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8
[ 4.444422] __irq_set_trigger+0x5c/0x178
[ 4.448435] __setup_irq+0x2e4/0x690
[ 4.452012] request_threaded_irq+0xc4/0x190
[ 4.456285] devm_request_threaded_irq+0x7c/0xf4
[ 4.459398] ata1: link resume succeeded after 1 retries
[ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0
[ 4.470660] mmc_start_host+0x50/0xac
[ 4.474327] mmc_add_host+0x80/0xe4
[ 4.477817] tmio_mmc_host_probe+0x2b0/0x440
[ 4.482094] renesas_sdhi_probe+0x488/0x6f4
[ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78
[ 4.491509] platform_probe+0x64/0xd8
[ 4.495178] really_probe+0xb8/0x2a8
[ 4.498756] __driver_probe_device+0x74/0x118
[ 4.503116] driver_probe_device+0x3c/0x154
[ 4.507303] __device_attach_driver+0xd4/0x160
[ 4.511750] bus_for_each_drv+0x84/0xe0
[ 4.515588] __device_attach_async_helper+0xb0/0xdc
[ 4.520470] async_run_entry_fn+0x30/0xd8
[ 4.524481] process_one_work+0x210/0x62c
[ 4.528494] worker_thread+0x1ac/0x340
[ 4.532245] kthread+0x10c/0x110
[ 4.535476] ret_from_fork+0x10/0x20
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250121135833.3769310-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Both new_device_store and delete_device_store touch module global
resources (e.g. gpio_aggregator_lock). To prevent race conditions with
module unload, a reference needs to be held.
Add try_module_get() in these handlers.
For new_device_store, this eliminates what appears to be the most dangerous
scenario: if an id is allocated from gpio_aggregator_idr but
platform_device_register has not yet been called or completed, a concurrent
module unload could fail to unregister/delete the device, leaving behind a
dangling platform device/GPIO forwarder. This can result in various issues.
The following simple reproducer demonstrates these problems:
#!/bin/bash
while :; do
# note: whether 'gpiochip0 0' exists or not does not matter.
echo 'gpiochip0 0' > /sys/bus/platform/drivers/gpio-aggregator/new_device
done &
while :; do
modprobe gpio-aggregator
modprobe -r gpio-aggregator
done &
wait
Starting with the following warning, several kinds of warnings will appear
and the system may become unstable:
------------[ cut here ]------------
list_del corruption, ffff888103e2e980->next is LIST_POISON1 (dead000000000100)
WARNING: CPU: 1 PID: 1327 at lib/list_debug.c:56 __list_del_entry_valid_or_report+0xa3/0x120
[...]
RIP: 0010:__list_del_entry_valid_or_report+0xa3/0x120
[...]
Call Trace:
<TASK>
? __list_del_entry_valid_or_report+0xa3/0x120
? __warn.cold+0x93/0xf2
? __list_del_entry_valid_or_report+0xa3/0x120
? report_bug+0xe6/0x170
? __irq_work_queue_local+0x39/0xe0
? handle_bug+0x58/0x90
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? __list_del_entry_valid_or_report+0xa3/0x120
gpiod_remove_lookup_table+0x22/0x60
new_device_store+0x315/0x350 [gpio_aggregator]
kernfs_fop_write_iter+0x137/0x1f0
vfs_write+0x262/0x430
ksys_write+0x60/0xd0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 828546e24280 ("gpio: Add GPIO Aggregator")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250224143134.3024598-2-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
Breno Leitao
Kent Overstreet
Ard Biesheuvel
Linus Torvalds
Fabrizio Castro
Haoxiang Li
Justin Iurman
Matt Johnston
Shrikanth Hegde
Michal Koutný
Takashi Iwai
Lorenzo Bianconi
Jens Axboe
Thomas Hellström
Matthew Brost
Stefan Binding
Dan Carpenter
Kenneth Feng
Richard Thier
K Prateek Nayak
Andrew Martin
Ma Ke
Zecheng Li
Olivier Gayot
Uday Shankar
Jason Xing
Yuezhang Mo
Eric Sandeen
Namjae Jeon
Niklas Söderlund
Koichiro Den