| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
get_super is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-17-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
BLKFLSBUF is a historic ioctl that is called on a file handle to a
block device and syncs either the file system mounted on that block
device if there is one, or otherwise the just the data on the block
device.
Replace the get_super based syncing with a holder operation to remove
the last usage of get_super, and to also support syncing the file system
if the block device is not the main block device stored in s_dev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-16-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Combine the newly merged bdev_mark_dead helper with the existing
mark_dead holder operation so that all operations that invalidate
a device that is dead or being removed now go through the holder
ops. This allows file systems to explicitly shutdown either ASAP
(for a surprise removal) or after writing back data (for an orderly
removal), and do so not only for the main device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-15-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We currently have two interfaces that take a block_devices and the find
a mounted file systems to flush or invaldidate data on it. Both are a
bit problematic because they only work for the "main" block devices
that is used as s_dev for the super_block, and because they don't call
into the file system at all.
Merge the two into a new bdev_mark_dead helper that does both the
syncing and invalidation and which is properly documented. This is
in preparation of merging the functionality into the ->mark_dead
holder operation so that it will work on additional block devices
used by a file systems and give us a single entry point for invalidation
of dead devices or media.
Note that a single standalone fsync_bdev call for an obscure ioctl
remains for now, but that one will also be deal with in a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-14-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This message isn't exactly helpful, and file systems already print way more
useful messages when shut down while active.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-13-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Don't just write out the data, but also invalidate all caches when setting
the device offline. Stop canceling the offlining when writeback fails
as there is no way to recover from that anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-12-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
FDFMTBEG is used by fdformat to calibrate before formatting a disk.
Neither the atari nor PC floppy driver sync data, which also seems
a bit pointless for a disk hat is about to get formatted.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-11-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
While changing the format of a floppy isn't strictly speaking a media
change, the effects are the same in that the content of the media
changes and the diskseq should be increased and uevent should be
sent. Switch from calling __invalidate_device to
disk_force_media_change to do so.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-10-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Hard code the events to DISK_EVENT_MEDIA_CHANGE as that is the only
useful use case, and drop the superfluous return value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-9-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
nbd_clear_sock_ioctl kills the socket and with that the block
device. Instead of just invalidating file system buffers,
mark the device as dead, which will also invalidate the buffers
as part of the proper shutdown sequence. This also includes
invalidating partitions if there are any.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-8-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use the generic fs_holder_ops to shut down the file system when the
log or RT device goes away instead of duplicating the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230802154131.2221419-13-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Just like get_tree_bdev needs to drop s_umount when opening the main
device, we need to do the same for the xfs log and RT devices to avoid a
potential lock order reversal with s_unmount for the mark_dead path.
It might be preferable to just drop s_umount over ->fill_super entirely,
but that will require a fairly massive audit first, so we'll do the easy
version here first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230802154131.2221419-12-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use the generic fs_holder_ops to shut down the file system when the
log device goes away instead of duplicating the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230802154131.2221419-11-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Just like get_tree_bdev needs to drop s_umount when opening the main
device, we need to do the same for the ext4 log device to avoid a
potential lock order reversal with s_unmount for the mark_dead path.
It might be preferable to just drop s_umount over ->fill_super entirely,
but that will require a fairly massive audit first, so we'll do the easy
version here first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-10-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Export fs_holder_ops so that file systems that open additional block
devices can use it as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-9-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
fs_mark_dead currently uses get_super to find the superblock for the
block device that is going away. This means it is limited to the
main device stored in sb->s_dev, leading to a lot of code duplication
for file systems that can use multiple block devices.
Now that the holder for all block devices used by file systems is set
to the super_block, we can instead look at that holder and then check
if the file system is born and active, so do that instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-8-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The file system type is not a very useful holder as it doesn't allow us
to go back to the actual file system instance. Pass the super_block instead
which is useful when passed back to the file system driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-7-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Check for sb->s_type which is the right place to look at the file system
type, not the holder, which is just an implementation detail in the VFS
helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-6-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use the generic setup_bdev_super helper to open the main block device
and do various bits of superblock setup instead of duplicating the
logic. This includes moving to the new scheme implemented in common
code that only opens the block device after the superblock has allocated.
It does not yet convert nilfs2 to the new mount API, but doing so will
become a bit simpler after this first step.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Message-Id: <20230802154131.2221419-3-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We'll want to use setup_bdev_super instead of duplicating it in nilfs2.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-2-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently get_tree_bdev and mount_bdev open the block device before
committing to allocating a super block. That creates problems for
restricting the number of writers to a device, and also leads to a
unusual and not very helpful holder (the fs_type).
Reorganize the super block code to first look whether the superblock for
a particular device does already exist and open the block device only if
it doesn't.
[hch: port to before the bdev_handle changes,
duplicate the bdev read-only check from blkdev_get_by_path,
extend the fsfree_mutex coverage to protect against freezes,
fix an open bdev leak when the bdev is frozen,
use the bdev local variable more,
rename the s variable to sb to be more descriptive]
[brauner: remove references to mounts as they're mostly irrelevant]
[brauner & hch: fold fixes for romfs and cramfs for
syzbot+2faac0423fdc9692822b@syzkaller.appspotmail.com]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230724175145.201318-1-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As a rule of thumb everything allocated to the fs_context and moved into
the super_block should be freed by ->kill_sb so that the teardown
handling doesn't need to be duplicated between the fill_super error
path and put_super. Implement an ntfs3-specific kill_sb method to do
that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230809220545.1308228-14-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
kill_block_super will call sync_blockdev just a tad later already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230809220545.1308228-13-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
put_ntfs is a rather unconventional name for a function that frees the
sbi and associated resources. Give it a more descriptive name and drop
the duplicate name in the top of the function comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230809220545.1308228-12-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As a rule of thumb everything allocated to the fs_context and moved into
the super_block should be freed by ->kill_sb so that the teardown
handling doesn't need to be duplicated between the fill_super error
path and put_super. Implement an exfat-specific kill_sb method to do
that and share the code with the mount contex free helper for the
mount error handling case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230809220545.1308228-11-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There are no RCU critical sections for accessing any information in the
sbi, so drop the call_rcu indirection for freeing the sbi.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230809220545.1308228-10-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
blkdev_put must not be called under sb->s_umount to avoid a lock order
reversal with disk->open_mutex. Move closing the external journal device
into ->kill_sb to archive that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230809220545.1308228-9-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Copy and paste the commit message from Darrick into a comment to explain
the seemingly odd invalidate_bdev in xfs_shutdown_devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-8-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
blkdev_put must not be called under sb->s_umount to avoid a lock order
reversal with disk->open_mutex. Move closing the buftargs into ->kill_sb
to archive that. Note that the flushing of the disk caches and
block device mapping invalidated needs to stay in ->put_super as the main
block device is closed in kill_block_super already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-7-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Closing the block devices logically belongs into xfs_free_buftarg, So
instead of open coding it in the caller move it there and add a check
for the s_bdev so that the main device isn't close as that's done by the
VFS helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-6-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There isn't much use for this trivial wrapper, especially as the NULL
check is only needed in a single call site.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-5-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As a rule of thumb everything allocated to the fs_context and moved into
the super_block should be freed by ->kill_sb so that the teardown
handling doesn't need to be duplicated between the fill_super error
path and put_super. Implement a XFS-specific kill_sb method to do that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-4-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
->put_super is only called when sb->s_root is set, and thus when
fill_super succeeds. Thus drop the NULL check that can't happen in
xfs_fs_put_super.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-3-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The xfs_fs_free prototype formatting is a weird mix of the classic XFS
style and the Linux style. Fix it up to be consistent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-2-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
bdev->bd_super is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230807112625.652089-5-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All ocfs2 journal error handling and logging is based on buffer_heads,
and the owning inode and thus super_block can be retrieved through
bh->b_assoc_map->host. Switch to using that to remove the last users
of bdev->bd_super.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Message-Id: <20230807112625.652089-4-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
__ext4_journal_get_write_access already has a super_block available,
and there is no need to go from that to the bdev to go back to the
owning super_block.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230807112625.652089-3-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
bdev->bd_super is a somewhat awkward backpointer from a block device to
an owning file system with unclear rules.
For the buffer_head code we already have a good backpointer for the
inode that the buffer_head is associated with, even if it lives on the
block device mapping: b_assoc_map. It is used track dirty buffers
associated with an inode but living on the block device mapping like
directory buffers in ext4.
mark_buffer_write_io_error already uses it for the call to
mapping_set_error, and should be doing the same for the per-sb error
sequence.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230807112625.652089-2-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
|
|
We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.
The answer is "No. No we cannot".
I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street. And at the yearly
maintainer summit, we will all sing the alphabet song together.
I doubt I will keep doing this. At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.
Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Lockdep is certainly right to complain about
(&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f
but task is already holding lock:
(&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db
Invert those to the usual ordering.
Fixes: 33313a747e81 ("mm: lock newly mapped VMA which can be modified after it becomes visible")
Cc: stable@vger.kernel.org
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When forking a child process, the parent write-protects anonymous pages
and COW-shares them with the child being forked using copy_present_pte().
We must not take any concurrent page faults on the source vma's as they
are being processed, as we expect both the vma and the pte's behind it
to be stable. For example, the anon_vma_fork() expects the parents
vma->anon_vma to not change during the vma copy.
A concurrent page fault on a page newly marked read-only by the page
copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the
source vma, defeating the anon_vma_clone() that wasn't done because the
parent vma originally didn't have an anon_vma, but we now might end up
copying a pte entry for a page that has one.
Before the per-vma lock based changes, the mmap_lock guaranteed
exclusion with concurrent page faults. But now we need to do a
vma_start_write() to make sure no concurrent faults happen on this vma
while it is being processed.
This fix can potentially regress some fork-heavy workloads. Kernel
build time did not show noticeable regression on a 56-core machine while
a stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~5% regression. If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance. Further
optimizations are possible if this regression proves to be problematic.
Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/
Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624
Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first")
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mmap_region adds a newly created VMA into VMA tree and might modify it
afterwards before dropping the mmap_lock. This poses a problem for page
faults handled under per-VMA locks because they don't take the mmap_lock
and can stumble on this VMA while it's still being modified. Currently
this does not pose a problem since post-addition modifications are done
only for file-backed VMAs, which are not handled under per-VMA lock.
However, once support for handling file-backed page faults with per-VMA
locks is added, this will become a race.
Fix this by write-locking the VMA before inserting it into the VMA tree.
Other places where a new VMA is added into VMA tree do not modify it
after the insertion, so do not need the same locking.
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With recent changes necessitating mmap_lock to be held for write while
expanding a stack, per-VMA locks should follow the same rules and be
write-locked to prevent page faults into the VMA being expanded. Add
the necessary locking.
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
The Smatch static checker reports the following warnings:
lib/dhry_run.c:38 dhry_benchmark() warn: sleeping in atomic context
lib/dhry_run.c:43 dhry_benchmark() warn: sleeping in atomic context
Indeed, dhry() does sleeping allocations inside the non-preemptable
section delimited by get_cpu()/put_cpu().
Fix this by using atomic allocations instead.
Add error handling, as atomic these allocations may fail.
Link: https://lkml.kernel.org/r/bac6d517818a7cd8efe217c1ad649fffab9cc371.1688568764.git.geert+renesas@glider.be
Fixes: 13684e966d46283e ("lib: dhry: fix unstable smp_processor_id(_) usage")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/0469eb3a-02eb-4b41-b189-de20b931fa56@moroto.mountain
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated
kmalloc space than requested") added precise kmalloc redzone poisoning to
the slub_debug functionality.
However, this commit didn't account for HW_TAGS KASAN fully initializing
the object via its built-in memory initialization feature. Even though
HW_TAGS KASAN memory initialization contains special memory initialization
handling for when slub_debug is enabled, it does not account for in-object
slub_debug redzones. As a result, HW_TAGS KASAN can overwrite these
redzones and cause false-positive slub_debug reports.
To fix the issue, avoid HW_TAGS KASAN memory initialization when
slub_debug is enabled altogether. Implement this by moving the
__slub_debug_enabled check to slab_post_alloc_hook. Common slab code
seems like a more appropriate place for a slub_debug check anyway.
Link: https://lkml.kernel.org/r/678ac92ab790dba9198f9ca14f405651b97c8502.1688561016.git.andreyknvl@google.com
Fixes: 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Will Deacon <will@kernel.org>
Acked-by: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: kasan-dev@googlegroups.com
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit bb6e04a173f0 ("kasan: use internal prototypes matching gcc-13
builtins") introduced a bug into the memory_is_poisoned_n implementation:
it effectively removed the cast to a signed integer type after applying
KASAN_GRANULE_MASK.
As a result, KASAN started failing to properly check memset, memcpy, and
other similar functions.
Fix the bug by adding the cast back (through an additional signed integer
variable to make the code more readable).
Link: https://lkml.kernel.org/r/8c9e0251c2b8b81016255709d4ec42942dcaf018.1688431866.git.andreyknvl@google.com
Fixes: bb6e04a173f0 ("kasan: use internal prototypes matching gcc-13 builtins")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I am going to lose my vrull.eu address at the end of july, and while
adding it to mailmap I also realised that there are more old addresses
from me dangling, so update .mailmap for all of them.
Link: https://lkml.kernel.org/r/20230704163919.1136784-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Update .mailmap for my work address and fix manpage".
While updating mailmap for the going-away address, I also found that on
current systems the manpage linked from the header comment changed.
And in fact it looks like the git mailmap feature got its own manpage.
This patch (of 2):
On recent systems the git-shortlog manpage only tells people to
See gitmailmap(5)
So instead of sending people on a scavenger hunt, put that info into the
header directly. Though keep the old reference around for older systems.
Link: https://lkml.kernel.org/r/20230704163919.1136784-1-heiko@sntech.de
Link: https://lkml.kernel.org/r/20230704163919.1136784-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
Christoph Hellwig
Jan Kara
Linus Torvalds
Hugh Dickins
Suren Baghdasaryan
Anup Sharma
Geert Uytterhoeven
Andrey Konovalov
Heiko Stuebner