| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit baf1ed24b27d ("powerpc/mm: Remove empty hash__ functions")
removed some empty hash MMU flushing routines, but got a bit overeager
and also removed the call to hash__tlb_flush() from tlb_flush().
In regular use this doesn't lead to any noticable breakage, which is a
little concerning. Presumably there are flushes happening via other
paths such as arch_leave_lazy_mmu_mode(), and/or a bit of luck.
Fix it by reinstating the call to hash__tlb_flush().
Fixes: baf1ed24b27d ("powerpc/mm: Remove empty hash__ functions")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230131111407.806770-1-mpe@ellerman.id.au
|
|
On Systems where online memory is lesser compared to max memory, the
kexec_file_load system call may fail to load the kdump kernel with the
below errors:
"Failed to update fdt with linux,drconf-usable-memory property"
"Error setting up usable-memory property for kdump kernel"
This happens because the size estimation for usable memory properties
for the kdump kernel's FDT is based on the online memory whereas the
usable memory properties include max memory. In short, the hot-pluggable
memory is not accounted for while estimating the size of the usable
memory properties.
The issue is addressed by calculating usable memory property size using
max hotplug address instead of the last online memory address.
Fixes: 2377c92e37fe ("powerpc/kexec_file: fix FDT size estimation for kdump kernel")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230131030615.729894-1-sourabhjain@linux.ibm.com
|
|
If a relocatable kernel is loaded at a non-zero address and told not to
relocate to zero (kdump or RELOCATABLE_TEST), the mapping of the
interrupt code at zero is left with RWX permissions.
That is a security weakness, and leads to a warning at boot if
CONFIG_DEBUG_WX is enabled:
powerpc/mm: Found insecure W+X mapping at address 00000000056435bc/0xc000000000000000
WARNING: CPU: 1 PID: 1 at arch/powerpc/mm/ptdump/ptdump.c:193 note_page+0x484/0x4c0
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.2.0-rc1-00001-g8ae8e98aea82-dirty #175
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,git-dd0dca hv:linux,kvm pSeries
NIP: c0000000004a1c34 LR: c0000000004a1c30 CTR: 0000000000000000
REGS: c000000003503770 TRAP: 0700 Not tainted (6.2.0-rc1-00001-g8ae8e98aea82-dirty)
MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 24000220 XER: 00000000
CFAR: c000000000545a58 IRQMASK: 0
...
NIP note_page+0x484/0x4c0
LR note_page+0x480/0x4c0
Call Trace:
note_page+0x480/0x4c0 (unreliable)
ptdump_pmd_entry+0xc8/0x100
walk_pgd_range+0x618/0xab0
walk_page_range_novma+0x74/0xc0
ptdump_walk_pgd+0x98/0x170
ptdump_check_wx+0x94/0x100
mark_rodata_ro+0x30/0x70
kernel_init+0x78/0x1a0
ret_from_kernel_thread+0x5c/0x64
The fix has two parts. Firstly the pages from zero up to the end of
interrupts need to be marked read-only, so that they are left with R-X
permissions. Secondly the mapping logic needs to be taught to ensure
there is a page boundary at the end of the interrupt region, so that the
permission change only applies to the interrupt text, and not the region
following it.
Fixes: c55d7b5e6426 ("powerpc: Remove STRICT_KERNEL_RWX incompatibility with RELOCATABLE")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230110124753.1325426-2-mpe@ellerman.id.au
|
|
If a relocatable kernel is loaded at an address that is not 2MB aligned
and told not to relocate to zero, the kernel can crash due to
mark_rodata_ro() incorrectly changing some read-write data to read-only.
Scenarios where the misalignment can occur are when the kernel is
loaded by kdump or using the RELOCATABLE_TEST config option.
Example crash with the kernel loaded at 5MB:
Run /sbin/init as init process
BUG: Unable to handle kernel data access on write at 0xc000000000452000
Faulting instruction address: 0xc0000000005b6730
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 1 PID: 1 Comm: init Not tainted 6.2.0-rc1-00011-g349188be4841 #166
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,git-5b4c5a hv:linux,kvm pSeries
NIP: c0000000005b6730 LR: c000000000ae9ab8 CTR: 0000000000000380
REGS: c000000004503250 TRAP: 0300 Not tainted (6.2.0-rc1-00011-g349188be4841)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 44288480 XER: 00000000
CFAR: c0000000005b66ec DAR: c000000000452000 DSISR: 0a000000 IRQMASK: 0
...
NIP memset+0x68/0x104
LR zero_user_segments.constprop.0+0xa8/0xf0
Call Trace:
ext4_mpage_readpages+0x7f8/0x830
ext4_readahead+0x48/0x60
read_pages+0xb8/0x380
page_cache_ra_unbounded+0x19c/0x250
filemap_fault+0x58c/0xae0
__do_fault+0x60/0x100
__handle_mm_fault+0x1230/0x1a40
handle_mm_fault+0x120/0x300
___do_page_fault+0x20c/0xa80
do_page_fault+0x30/0xc0
data_access_common_virt+0x210/0x220
This happens because mark_rodata_ro() tries to change permissions on the
range _stext..__end_rodata, but _stext sits in the middle of the 2MB
page from 4MB to 6MB:
radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec)
radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000000400000-0x0000000002400000 with 2.00 MiB pages (exec)
The logic that changes the permissions assumes the linear mapping was
split correctly at boot, so it marks the entire 2MB page read-only. That
leads to the write fault above.
To fix it, the boot time mapping logic needs to consider that if the
kernel is running at a non-zero address then _stext is a boundary where
it must split the mapping.
That leads to the mapping being split correctly, allowing the rodata
permission change to take happen correctly, with no spillover:
radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec)
radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000000400000-0x0000000000500000 with 64.0 KiB pages
radix-mmu: Mapped 0x0000000000500000-0x0000000000600000 with 64.0 KiB pages (exec)
radix-mmu: Mapped 0x0000000000600000-0x0000000002400000 with 2.00 MiB pages (exec)
If the kernel is loaded at a 2MB aligned address, the mapping continues
to use 2MB pages as before:
radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec)
radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000000400000-0x0000000002c00000 with 2.00 MiB pages (exec)
radix-mmu: Mapped 0x0000000002c00000-0x0000000100000000 with 2.00 MiB pages
Fixes: c55d7b5e6426 ("powerpc: Remove STRICT_KERNEL_RWX incompatibility with RELOCATABLE")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230110124753.1325426-1-mpe@ellerman.id.au
|
|
In kexec_extra_fdt_size_ppc64() there's logic to estimate how much
extra space will be needed in the device tree for some memory related
properties.
That logic uses the size of RAM divided by drmem_lmb_size() to do the
estimation. However drmem_lmb_size() can be zero if the machine has no
hotpluggable memory configured, which is the case when booting with qemu
and no maxmem=x parameter is passed (the default).
The division by zero is reported by UBSAN, and can also lead to an
overflow and a warning from kvmalloc, and kdump kernel loading fails:
WARNING: CPU: 0 PID: 133 at mm/util.c:596 kvmalloc_node+0x15c/0x160
Modules linked in:
CPU: 0 PID: 133 Comm: kexec Not tainted 6.2.0-rc5-03455-g07358bd97810 #223
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1200 0xf000005 of:SLOF,git-dd0dca pSeries
NIP: c00000000041ff4c LR: c00000000041fe58 CTR: 0000000000000000
REGS: c0000000096ef750 TRAP: 0700 Not tainted (6.2.0-rc5-03455-g07358bd97810)
MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24248242 XER: 2004011e
CFAR: c00000000041fed0 IRQMASK: 0
...
NIP kvmalloc_node+0x15c/0x160
LR kvmalloc_node+0x68/0x160
Call Trace:
kvmalloc_node+0x68/0x160 (unreliable)
of_kexec_alloc_and_setup_fdt+0xb8/0x7d0
elf64_load+0x25c/0x4a0
kexec_image_load_default+0x58/0x80
sys_kexec_file_load+0x5c0/0x920
system_call_exception+0x128/0x330
system_call_vectored_common+0x15c/0x2ec
To fix it, skip the calculation if drmem_lmb_size() is zero.
Fixes: 2377c92e37fe ("powerpc/kexec_file: fix FDT size estimation for kdump kernel")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230130014707.541110-1-mpe@ellerman.id.au
|
|
The recent commit 76d588dddc45 ("powerpc/imc-pmu: Fix use of mutex in
IRQs disabled section") fixed warnings (and possible deadlocks) in the
IMC PMU driver by converting the locking to use spinlocks.
It also converted the init-time nest_init_lock to a spinlock, even
though it's not used at runtime in IRQ disabled sections or while
holding other spinlocks.
This leads to warnings such as:
BUG: sleeping function called from invalid context at include/linux/percpu-rwsem.h:49
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.2.0-rc2-14719-gf12cd06109f4-dirty #1
Hardware name: Mambo,Simulated-System POWER9 0x4e1203 opal:v6.6.6 PowerNV
Call Trace:
dump_stack_lvl+0x74/0xa8 (unreliable)
__might_resched+0x178/0x1a0
__cpuhp_setup_state+0x64/0x1e0
init_imc_pmu+0xe48/0x1250
opal_imc_counters_probe+0x30c/0x6a0
platform_probe+0x78/0x110
really_probe+0x104/0x420
__driver_probe_device+0xb0/0x170
driver_probe_device+0x58/0x180
__driver_attach+0xd8/0x250
bus_for_each_dev+0xb4/0x140
driver_attach+0x34/0x50
bus_add_driver+0x1e8/0x2d0
driver_register+0xb4/0x1c0
__platform_driver_register+0x38/0x50
opal_imc_driver_init+0x2c/0x40
do_one_initcall+0x80/0x360
kernel_init_freeable+0x310/0x3b8
kernel_init+0x30/0x1a0
ret_from_kernel_thread+0x5c/0x64
Fix it by converting nest_init_lock back to a mutex, so that we can call
sleeping functions while holding it. There is no interaction between
nest_init_lock and the runtime spinlocks used by the actual PMU routines.
Fixes: 76d588dddc45 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section")
Tested-by: Kajol Jain<kjain@linux.ibm.com>
Reviewed-by: Kajol Jain<kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230130014401.540543-1-mpe@ellerman.id.au
|
|
Interrupt entry sets the soft mask to IRQS_ALL_DISABLED to match the
hard irq disabled state. So when should_hard_irq_enable() returns true
because we want PMI interrupts in irq handlers, MSR[EE] is enabled but
PMIs just get soft-masked. Fix this by clearing IRQS_PMI_DISABLED before
enabling MSR[EE].
This also tidies some of the warnings, no need to duplicate them in
both should_hard_irq_enable() and do_hard_irq_enable().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121100156.2824054-1-npiggin@gmail.com
|
|
When PMI interrupts are soft-masked, local_irq_save() will clear the PMI
mask bit, allowing PMIs in and causing a race condition. This causes a
deadlock in native_hpte_insert via hash_preload, which depends on PMIs
being disabled since commit 8b91cee5eadd ("powerpc/64s/hash: Make hash
faults work in NMI context"). native_hpte_insert calls local_irq_save().
It's possible the lpar hash code is also affected when tracing is
enabled because __trace_hcall_entry() calls local_irq_save().
Fix this by making arch_local_irq_save() _or_ the IRQS_DISABLED bit into
the mask.
This was found with the stress_hpt option with a kbuild workload running
together with `perf record -g`.
Fixes: f442d004806e ("powerpc/64s: Add support to mask perf interrupts and replay them")
Fixes: 8b91cee5eadd ("powerpc/64s/hash: Make hash faults work in NMI context")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Just take the fix without the new warning]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121095352.2823517-1-npiggin@gmail.com
|
|
objtool throws the following warning:
arch/powerpc/kvm/booke.o: warning: objtool: kvmppc_fill_pt_regs+0x30:
unannotated intra-function call
Fix the warning by setting the value of 'nip' using the _THIS_IP_ macro,
without using an assembly bl/mflr sequence to save the instruction
pointer.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230128124158.1066251-1-sv@linux.ibm.com
|
|
objtool throws the following warning:
arch/powerpc/kernel/head_85xx.o: warning: objtool: .head.text+0x1a6c:
unannotated intra-function call
Fix the warning by annotating KernelSPE symbol with SYM_FUNC_START_LOCAL
and SYM_FUNC_END macros.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230128124138.1066176-1-sv@linux.ibm.com
|
|
stress_hpt_timer_fn() is only used in hash_utils.c, make it static.
Fixes: 6b34a099faa1 ("powerpc/64s/hash: add stress_hpt kernel boot option to increase hash faults")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221228093603.3166599-1-yangyingliang@huawei.com
|
|
Current imc-pmu code triggers a WARNING with CONFIG_DEBUG_ATOMIC_SLEEP
and CONFIG_PROVE_LOCKING enabled, while running a thread_imc event.
Command to trigger the warning:
# perf stat -e thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ sleep 5
Performance counter stats for 'sleep 5':
0 thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/
5.002117947 seconds time elapsed
0.000131000 seconds user
0.001063000 seconds sys
Below is snippet of the warning in dmesg:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2869, name: perf-exec
preempt_count: 2, expected: 0
4 locks held by perf-exec/2869:
#0: c00000004325c540 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: bprm_execve+0x64/0xa90
#1: c00000004325c5d8 (&sig->exec_update_lock){++++}-{3:3}, at: begin_new_exec+0x460/0xef0
#2: c0000003fa99d4e0 (&cpuctx_lock){-...}-{2:2}, at: perf_event_exec+0x290/0x510
#3: c000000017ab8418 (&ctx->lock){....}-{2:2}, at: perf_event_exec+0x29c/0x510
irq event stamp: 4806
hardirqs last enabled at (4805): [<c000000000f65b94>] _raw_spin_unlock_irqrestore+0x94/0xd0
hardirqs last disabled at (4806): [<c0000000003fae44>] perf_event_exec+0x394/0x510
softirqs last enabled at (0): [<c00000000013c404>] copy_process+0xc34/0x1ff0
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 36 PID: 2869 Comm: perf-exec Not tainted 6.2.0-rc2-00011-g1247637727f2 #61
Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
Call Trace:
dump_stack_lvl+0x98/0xe0 (unreliable)
__might_resched+0x2f8/0x310
__mutex_lock+0x6c/0x13f0
thread_imc_event_add+0xf4/0x1b0
event_sched_in+0xe0/0x210
merge_sched_in+0x1f0/0x600
visit_groups_merge.isra.92.constprop.166+0x2bc/0x6c0
ctx_flexible_sched_in+0xcc/0x140
ctx_sched_in+0x20c/0x2a0
ctx_resched+0x104/0x1c0
perf_event_exec+0x340/0x510
begin_new_exec+0x730/0xef0
load_elf_binary+0x3f8/0x1e10
...
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<00000000fd63e7cf>] do_nanosleep+0x60/0x1a0
WARNING: CPU: 36 PID: 2869 at kernel/sched/core.c:9912 __might_sleep+0x9c/0xb0
CPU: 36 PID: 2869 Comm: sleep Tainted: G W 6.2.0-rc2-00011-g1247637727f2 #61
Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
NIP: c000000000194a1c LR: c000000000194a18 CTR: c000000000a78670
REGS: c00000004d2134e0 TRAP: 0700 Tainted: G W (6.2.0-rc2-00011-g1247637727f2)
MSR: 9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR: 48002824 XER: 00000000
CFAR: c00000000013fb64 IRQMASK: 1
The above warning triggered because the current imc-pmu code uses mutex
lock in interrupt disabled sections. The function mutex_lock()
internally calls __might_resched(), which will check if IRQs are
disabled and in case IRQs are disabled, it will trigger the warning.
Fix the issue by changing the mutex lock to spinlock.
Fixes: 8f95faaac56c ("powerpc/powernv: Detect and create IMC device")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Fix comments, trim oops in change log, add reported-by tags]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230106065157.182648-1-kjain@linux.ibm.com
|
|
The ld_version() function computes the wrong version value for certain
ld versions such as the following:
$ ld --version
GNU ld (GNU Binutils; SUSE Linux Enterprise 15)
2.37.20211103-150100.7.37
For input 2.37.20211103, the value computed is 202348030000 which is
higher than the value for a later version like 2.39.0, which is
23900000.
This issue was highlighted because with the above ld version, the
powerpc kernel build started failing with ld error: "unrecognized option
--no-warn-rwx-segments". This was caused due to the recent commit
579aee9fc594 ("powerpc: suppress some linker warnings in recent linker
versions") which added the --no-warn-rwx-segments linker flag if the ld
version is greater than 2.39.
Due to the bug in ld_version(), ld version 2.37.20111103 is wrongly
calculated to be greater than 2.39 and the unsupported flag is added.
To fix it, if version is of the form x.y.z and length(z) == 8, then most
probably it is a date [yyyymmdd] commonly used for release snapshots and
not an actual new version. Hence, ignore the date part replacing it with
0.
Fixes: 579aee9fc594 ("powerpc: suppress some linker warnings in recent linker versions")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
[mpe: Tweak change log wording/formatting, add Fixes tag]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230104202437.90039-1-ojaswin@linux.ibm.com
|
|
Although the powerpc linker script mentions .comment in the DISCARD
section, that has never actually caused it to be discarded, because the
earlier ELF_DETAILS macro (previously STABS_DEBUG) explicitly includes
.comment.
However commit 99cb0d917ffa ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro. With binutils < 2.36 that causes the DISCARD directives later in
the script to be applied earlier, causing .comment to actually be
discarded.
It's confusing to explicitly include and discard .comment, and even more
so if the behaviour depends on the toolchain version. So don't discard
.comment in order to maintain the existing behaviour in all cases.
Fixes: 83a092cf95f2 ("powerpc: Link warning for orphan sections")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-3-mpe@ellerman.id.au
|
|
Relocatable kernels must not discard relocations, they need to be
processed at runtime. As such they are included for CONFIG_RELOCATABLE
builds in the powerpc linker script (line 340).
However they are also unconditionally discarded later in the
script (line 414). Previously that worked because the earlier inclusion
superseded the discard.
However commit 99cb0d917ffa ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 137). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier, causing .rela* to
actually be discarded at link time, leading to build warnings and a
kernel that doesn't boot:
ld: warning: discarding dynamic section .rela.init.rodata
Fix it by conditionally discarding .rela* only when CONFIG_RELOCATABLE
is disabled.
Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-2-mpe@ellerman.id.au
|
|
The powerpc linker script explicitly includes .exit.text, because
otherwise the link fails due to references from __bug_table and
__ex_table. The code is freed (discarded) at runtime along with
.init.text and data.
That has worked in the past despite powerpc not defining
RUNTIME_DISCARD_EXIT because DISCARDS appears late in the powerpc linker
script (line 410), and the explicit inclusion of .exit.text
earlier (line 280) supersedes the discard.
However commit 99cb0d917ffa ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 136). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier [1], causing
.exit.text to actually be discarded at link time, leading to build
errors:
'.exit.text' referenced in section '__bug_table' of crypto/algboss.o: defined in
discarded section '.exit.text' of crypto/algboss.o
'.exit.text' referenced in section '__ex_table' of drivers/nvdimm/core.o: defined in
discarded section '.exit.text' of drivers/nvdimm/core.o
Fix it by defining RUNTIME_DISCARD_EXIT, which causes the generic
DISCARDS macro to not include .exit.text at all.
1: https://lore.kernel.org/lkml/87fscp2v7k.fsf@igel.home/
Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-1-mpe@ellerman.id.au
|
|
|
|
Due to copy-paste fail, MIPI_BKLT_EN_1 would always use PPS index 1,
never 0. Fix the sloppiest commit in recent memory.
Fixes: 963bbdb32b47 ("drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220140105.313333-1-jani.nikula@intel.com
(cherry picked from commit a561933c571798868b5fa42198427a7e6df56c09)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Starting from ICL, the default for MIPI GPIO sequences seems to be using
native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse
many pins that quite frankly seem scary to poke based on the VBT
sequences. We pretty much have to trust that the board is configured
such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for
anything else.
MIPI sequence v4 also adds a flag to fall back to non-native sequences.
v5:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler()
too (Ville)
- References instead of Closes issue 6131 because this does not fix everything
v4:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville)
v3:
- Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>)
v2:
- Fix HPD pin output set (impacts GPIOs 0 and 5)
- Fix GPIO data output direction set (impacts GPIOs 4 and 9)
- Reduce register accesses to single intel_de_rwm()
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com
(cherry picked from commit f087cfe6fcff58044f7aa3b284965af47f472fb0)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This is unneeded since commit 69304379ff03 ("fixdep: use fflush() and
ferror() to ensure successful write to files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This was previously alphabetically sorted. Sort it again.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Guoqing Jiang reports that openSUSE cannot compile the kernel rpm due
to "BuildRequires: elfutils-libelf-devel" added by commit 8818039f959b
("kbuild: add ability to make source rpm buildable using koji").
The relevant package name in openSUSE is libelf-devel.
Add it as an alternative package.
BTW, if it is impossible to solve the build requirement, the final
resort would be:
$ make RPMOPTS=--nodeps rpm-pkg
This passes --nodeps to the rpmbuild command so it will not verify
build dependencies. This is useful to test rpm builds on non-rpm
system. On Debian/Ubuntu, for example, you can install rpmbuild by
'apt-get install rpm'.
NOTE1:
Likewise, it is possible to bypass the build dependency check for
debian package builds:
$ make DPKG_FLAGS=-d deb-pkg
NOTE2:
The 'or' operator is supported since RPM 4.13. So, old distros such
as CentOS 7 will break. I suggest installing newer rpmbuild in such
cases.
Link: https://lore.kernel.org/linux-kbuild/ee227d24-9c94-bfa3-166a-4ee6b5dfea09@linux.dev/T/#u
Fixes: 8818039f959b ("kbuild: add ability to make source rpm buildable using koji")
Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
|
|
commit 3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost
rule") moved 'vmlinux.o' inside modpost-args, possibly before some of
the other options. However, getopt() in musl libc follows POSIX and
stops looking for options upon reaching the first non-option argument.
As a result, the '-T' option is misinterpreted as a positional argument,
and the build fails:
make -f ./scripts/Makefile.modpost
scripts/mod/modpost -E -o Module.symvers vmlinux.o -T modules.order
-T: No such file or directory
make[1]: *** [scripts/Makefile.modpost:137: Module.symvers] Error 1
make: *** [Makefile:1960: modpost] Error 2
The fix is to move all options before 'vmlinux.o' in modpost-args.
Fixes: 3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost rule")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The help message line for building the source RPM package was missing.
Added it.
Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Previously, *.rpm files were created under $HOME/rpmbuild/, but since
commit 8818039f959b ("kbuild: add ability to make source rpm buildable
using koji"), srcrpm-pkg creates the source rpm in the kernel tree
because it sets '_srcrpmdir'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux
since commit 994b7ac1697b ("arm64: remove special treatment for the
link order of head.o").
The issue is that the type of .notes section, which contains the BuildID,
changed from NOTES to PROGBITS.
Ard Biesheuvel figured out that whichever object gets linked first gets
to decide the type of a section. The PROGBITS type is the result of the
compiler emitting .note.GNU-stack as PROGBITS rather than NOTE.
While Ard provided a fix for arm64, I want to fix this globally because
the same issue is happening on riscv since commit 2348e6bf4421 ("riscv:
remove special treatment for the link order of head.o"). This problem
will happen in general for other architectures if they start to drop
unneeded entries from scripts/head-object-list.txt.
Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h.
Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/
Fixes: 994b7ac1697b ("arm64: remove special treatment for the link order of head.o")
Fixes: 2348e6bf4421 ("riscv: remove special treatment for the link order of head.o")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In the case where a firmware file is too large (e.g. someone
downloaded a web page ASCII dump from github...), the firmware object
is released but the pointer is not zerod. If no other firmware file
was found then release would be called again leading to a double kfree.
Also, the size check was only being applied to the initial firmware
load not any of the subsequent attempts. So move the check into a
wrapper that is used for all loads.
Fixes: 016241168dc5 ("drm/i915/uc: use different ggtt pin offsets for uc loads")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221221193031.687266-4-John.C.Harrison@Intel.com
(cherry picked from commit 4071d98b296a5bc5fd4b15ec651bd05800ec9510)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The catch-all evict can fail due to object lock contention, since it
only goes as far as trylocking the object, due to us already holding the
vm->mutex. Doing a full object lock here can deadlock, since the
vm->mutex is always our inner lock. Add another execbuf pass which drops
the vm->mutex and then tries to grab the object will the full lock,
before then retrying the eviction. This should be good enough for now to
fix the immediate regression with userspace seeing -ENOSPC from execbuf
due to contended object locks during GTT eviction.
v2 (Mani)
- Also revamp the docs for the different passes.
Testcase: igt@gem_ppgtt@shrink-vs-evict-*
Fixes: 7e00897be8bf ("drm/i915: Add object locking to i915_gem_evict_for_node and i915_gem_evict_something, v2.")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7627
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7570
References: https://bugzilla.mozilla.org/show_bug.cgi?id=1779558
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Mani Milani <mani@chromium.org>
Cc: <stable@vger.kernel.org> # v5.18+
Reviewed-by: Mani Milani <mani@chromium.org>
Tested-by: Mani Milani <mani@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216113456.414183-1-matthew.auld@intel.com
(cherry picked from commit 801fa7a81f6da533cc5442fc40e32c72b76cd42a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The attribute __maybe_unused should remain only until the respective
info is not in the pciidlist. The info can't be added together
with its definition because that would cause the driver to automatically
probe for the device, while it's still not ready for that. However once
pciidlist contains it, the attribute can be removed.
Fixes: 7835303982d1 ("drm/i915/mtl: Add MeteorLake PCI IDs")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214194944.3670344-1-lucas.demarchi@intel.com
(cherry picked from commit 50490ce05b7a50b0bd4108fa7d6db3ca2972fa83)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In case of Gen12.50 video and compute engines, TLB_INV registers are
masked - to modify one bit, corresponding bit in upper half of the register
must be enabled, otherwise nothing happens.
Fixes: 77fa9efc16a9 ("drm/i915/xehp: Create separate reg definitions for new MCR registers")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214075439.402485-1-andrzej.hajda@intel.com
(cherry picked from commit 4d5cf7b1680a1e6db327e3c935ef58325cbedb2c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add few static text to explain how one can bring up the search dialog
box by pressing the forward slash key anywhere on this interface.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When initializing auth context, there may be no secrets passed
by the user. Make return code explicit when returning successfully.
smatch warnings:
drivers/nvme/host/auth.c:950 nvme_auth_init_ctrl() warn: missing error code? 'ret'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commands like Write Zeros can change the contents of a namespaces without
actually transferring data. To protect against this, check the Commands
Supported and Effects log is supported by the controller for any
unprivileg command passthrough and refuse unprivileged passthrough if the
command has any effects that can change data or metadata.
Note: While the Commands Support and Effects log page has only been
mandatory since NVMe 2.0, it is widely supported because Windows requires
it for any command passthrough from userspace.
Fixes: e4fbcf32c860 ("nvme: identify-namespace without CAP_SYS_ADMIN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
To be able to use the Commands Supported and Effects Log for allowing
unprivileged passtrough, it needs to be corretly reported for I/O
commands as well. Return the I/O command effects from
nvme_command_effects, and also add a default list of effects for the
NVM command set. For other command sets, the Commands Supported and
Effects log is required to be present already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
Mask out the "Command Supported" and "Logical Block Content Change" bits
and only defer execution of commands that have non-trivial effects to
the workqueue for synchronous execution. This allows to execute admin
commands asynchronously on controllers that provide a Command Supported
and Effects log page, and will keep allowing to execute Write commands
asynchronously once command effects on I/O commands are taken into
account.
Fixes: c1fef73f793b ("nvmet: add passthru code to process commands")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
Write, Write Zeroes, Zone append and a Zone Reset through
Zone Management Send modify the logical block content of a namespace,
so make sure the LBCC bit is reported for them.
Fixes: b5d0b38c0475 ("nvmet: add Command Set Identifier support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a
single value to multiple array entries instead of repeated assignments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
3 << 16 does not generate the correct mask for bits 16, 17 and 18.
Use the GENMASK macro to generate the correct mask instead.
Fixes: 84fef62d135b ("nvme: check admin passthru command effects")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
This adds a document about what specification features are supported by
the Linux NVMe driver, and what qualifies for a quirk if an implementation
has problems following the specification.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
|
|
The recent code refactoring for HD-audio HDMI codec driver caused a
regression on AMD/ATI HDMI codecs; namely, PulseAudioand pipewire
don't recognize HDMI outputs any longer while the direct output via
ALSA raw access still works.
The problem turned out that, after the code refactoring, the driver
assumes only the dynamic PCM assignment, and when a PCM stream that
still isn't assigned to any pin gets opened, the driver tries to
assign any free converter to the PCM stream. This behavior is OK for
Intel and other codecs, as they have arbitrary connections between
pins and converters. OTOH, on AMD chips that have a 1:1 mapping
between pins and converters, this may end up with blocking the open of
the next PCM stream for the pin that is tied with the formerly taken
converter.
Also, with the code refactoring, more PCM streams are exposed than
necessary as we assume all converters can be used, while this isn't
true for AMD case. This may change the PCM stream assignment and
confuse users as well.
This patch fixes those problems by:
- Introducing a flag spec->static_pcm_mapping, and if it's set, the
driver applies the static mapping between pins and converters at the
probe time
- Limiting the number of PCM streams per pins, too; this avoids the
superfluous PCM streams
Fixes: ef6f5494faf6 ("ALSA: hda/hdmi: Use only dynamic PCM device allocation")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216836
Co-developed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20221228125714.16329-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 8fda37cf3d41 ("KVM: selftests: Stuff RAX/RCX with 'safe' values
in vmmcall()/vmcall()", 2022-11-21) broke the svm_nested_soft_inject_test
because it placed a "pop rbp" instruction after vmmcall. While this is
correct and mimics what is done in the VMX case, this particular test
expects a ud2 instruction right after the vmmcall, so that it can skip
over it in the L1 part of the test.
Inline a suitably-modified version of vmmcall() to restore the
functionality of the test.
Fixes: 8fda37cf3d41 ("KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()"
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221130181147.9911-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently only the locking order of SRCU vs kvm->slots_arch_lock
and kvm->slots_lock is documented. Extend this to kvm->lock
since Xen emulation got it terribly wrong.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
While KVM_XEN_EVTCHN_RESET is usually called with no vCPUs running,
if that happened it could cause a deadlock. This is due to
kvm_xen_eventfd_reset() doing a synchronize_srcu() inside
a kvm->lock critical section.
To avoid this, first collect all the evtchnfd objects in an
array and free all of them once the kvm->lock critical section
is over and th SRCU grace period has expired.
Reported-by: Michal Luczaj <mhal@rbox.co>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
include/uapi/linux/io_uring.h is synced 1:1 into
liburing:src/include/liburing/io_uring.h.
liburing has a configure check to detect the need for
linux/time_types.h. It can opt-out by defining
UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H
Fixes: 78a861b94959 ("io_uring: add sync cancelation API through io_uring_register()")
Link: https://github.com/axboe/liburing/issues/708
Link: https://github.com/axboe/liburing/pull/709
Link: https://lore.kernel.org/io-uring/20221115212614.1308132-1-ammar.faizi@intel.com/T/#m9f5dd571cd4f6a5dee84452dbbca3b92ba7a4091
CC: Jens Axboe <axboe@kernel.dk>
Cc: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Link: https://lore.kernel.org/r/7071a0a1d751221538b20b63f9160094fc7e06f4.1668630247.git.metze@samba.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In a scenario where kcalloc() fails to allocate memory, the futex_waitv
system call immediately returns -ENOMEM without invoking
destroy_hrtimer_on_stack(). When CONFIG_DEBUG_OBJECTS_TIMERS=y, this
results in leaking a timer debug object.
Fixes: bf69bad38cf6 ("futex: Implement sys_futex_waitv()")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: stable@vger.kernel.org
Cc: stable@vger.kernel.org # v5.16+
Link: https://lore.kernel.org/r/20221214222008.200393-1-mathieu.desnoyers@efficios.com
|
|
Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping
speculative execution after function return, kprobe jump optimization
always fails on the functions with such INT3 inside the function body.
(It already checks the INT3 padding between functions, but not inside
the function)
To avoid this issue, as same as kprobes, check whether the INT3 comes
from kgdb or not, and if so, stop decoding and make it fail. The other
INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be
treated as a one-byte instruction.
Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/167146051929.1374301.7419382929328081706.stgit@devnote3
|
|
Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping
speculative execution after RET instruction, kprobes always failes to
check the probed instruction boundary by decoding the function body if
the probed address is after such sequence. (Note that some conditional
code blocks will be placed after function return, if compiler decides
it is not on the hot path.)
This is because kprobes expects kgdb puts the INT3 as a software
breakpoint and it will replace the original instruction.
But these INT3 are not such purpose, it doesn't need to recover the
original instruction.
To avoid this issue, kprobes checks whether the INT3 is owned by
kgdb or not, and if so, stop decoding and make it fail. The other
INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be
treated as a one-byte instruction.
Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/167146051026.1374301.392728975473572291.stgit@devnote3
|
|
The addition of callthunks_translate_call_dest means that
skip_addr() and patch_dest() can no longer be discarded
as part of the __init section freeing:
WARNING: modpost: vmlinux.o: section mismatch in reference: callthunks_translate_call_dest.cold (section: .text.unlikely) -> skip_addr (section: .init.text)
WARNING: modpost: vmlinux.o: section mismatch in reference: callthunks_translate_call_dest.cold (section: .text.unlikely) -> patch_dest (section: .init.text)
WARNING: modpost: vmlinux.o: section mismatch in reference: is_callthunk.cold (section: .text.unlikely) -> skip_addr (section: .init.text)
ERROR: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
Fixes: b2e9dfe54be4 ("x86/bpf: Emit call depth accounting if required")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221215164334.968863-1-arnd@kernel.org
|
|
It passes the attr struct to the security_perf_event_open() but it's
not initialized yet.
Fixes: da97e18458fb ("perf_event: Add support for LSM and SELinux checks")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221220223140.4020470-1-namhyung@kernel.org
|
|
The syscall error path has a use-after-free; put_pmu_ctx() will
reference ctx, therefore we must ensure ctx is destroyed after pmu_ctx
is.
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Reported-by: syzbot+b8e8c01c8ade4fe6e48f@syzkaller.appspotmail.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lkml.kernel.org/r/Y6B3xEgkbmFUCeni@hirez.programming.kicks-ass.net
|
Michael Ellerman
Sourabh Jain
Nicholas Piggin
Sathvika Vasireddy
Yang Yingliang
Kajol Jain
Ojaswin Mujoo
Linus Torvalds
Jani Nikula
Masahiro Yamada
Samuel Holland
Jun ASAKA
John Harrison
Matthew Auld
Lucas De Marchi
Andrzej Hajda
Bhaskar Chowdhury
Sagi Grimberg
Christoph Hellwig
Takashi Iwai
Paolo Bonzini
Stefan Metzmacher
Mathieu Desnoyers
Masami Hiramatsu (Google)
Arnd Bergmann
Namhyung Kim
Peter Zijlstra