aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2023-09-20arm64: dts: qcom: pm8916: Drop codec reg-names and mclkStephan Gerhold2-5/+0
Drop the redundant reg-names and mclk from the PM8916 analog codec that were removed from the DT schema. Having the mclk on the analog codec is incorrect because only the digital codec consumes it directly. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20230718-pm8916-mclk-v1-6-4b4a58b4240a@gerhold.net Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sdx75-idp: align RPMh regulator nodes with bindingsKrzysztof Kozlowski1-1/+1
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes: sdx75-idp.dtb: rsc@17a00000: 'pmx75-rpmh-regulators' does not match any of the regexes: '^regulators(-[0-9])?$', 'pinctrl-[0-9]+' Fixes: 8a2dc39d1043 ("arm64: dts: qcom: sdx75-idp: Add regulator nodes") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230905163103.257412-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm4250-billie2: correct UFS pad supplyKrzysztof Kozlowski1-1/+1
The Qualcomm UFS phy switched from dedicated driver to QMP phy driver. Eventually the old driver was removed in commit 02dca8c981b5 ("phy: qcom: remove ufs qmp phy driver"). The original driver and its binding used vddp-ref-clk regulator supply, but the new one did not and left the supply unused. The Qualcomm UFS phy bindings were also migrated to newer ones and dropped support for vddp-ref-clk regulator in commit dc5cb63592bd ("dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml"). It turns out that this regulator, although with inaccurate name vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or similar, depending on the SoC) used by UFS controller. Bring back handling of this supply by using more appropriate regulator - UFS controller host supply. This also fixes dtbs_check warning: sm4250-oneplus-billie2.dtb: phy@4807000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230905161920.252013-13-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: msm8998-sagit: correct UFS pad supplyKrzysztof Kozlowski1-1/+1
The Qualcomm UFS phy switched from dedicated driver to QMP phy driver. Eventually the old driver was removed in commit 02dca8c981b5 ("phy: qcom: remove ufs qmp phy driver"). The original driver and its binding used vddp-ref-clk regulator supply, but the new one did not and left the supply unused. The Qualcomm UFS phy bindings were also migrated to newer ones and dropped support for vddp-ref-clk regulator in commit dc5cb63592bd ("dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml"). It turns out that this regulator, although with inaccurate name vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or similar, depending on the SoC) used by UFS controller. Bring back handling of this supply by using more appropriate regulator - UFS controller host supply. This also fixes dtbs_check warning: msm8998-xiaomi-sagit.dtb: phy@1da7000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230905161920.252013-12-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: msm8998-oneplus: correct UFS pad supplyKrzysztof Kozlowski1-1/+1
The Qualcomm UFS phy switched from dedicated driver to QMP phy driver. Eventually the old driver was removed in commit 02dca8c981b5 ("phy: qcom: remove ufs qmp phy driver"). The original driver and its binding used vddp-ref-clk regulator supply, but the new one did not and left the supply unused. The Qualcomm UFS phy bindings were also migrated to newer ones and dropped support for vddp-ref-clk regulator in commit dc5cb63592bd ("dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml"). It turns out that this regulator, although with inaccurate name vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or similar, depending on the SoC) used by UFS controller. Bring back handling of this supply by using more appropriate regulator - UFS controller host supply. This also fixes dtbs_check warning: msm8998-oneplus-dumpling.dtb: phy@1da7000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230905161920.252013-11-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: msm8998-mtp: correct UFS pad supplyKrzysztof Kozlowski1-1/+1
The Qualcomm UFS phy switched from dedicated driver to QMP phy driver. Eventually the old driver was removed in commit 02dca8c981b5 ("phy: qcom: remove ufs qmp phy driver"). The original driver and its binding used vddp-ref-clk regulator supply, but the new one did not and left the supply unused. The Qualcomm UFS phy bindings were also migrated to newer ones and dropped support for vddp-ref-clk regulator in commit dc5cb63592bd ("dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml"). It turns out that this regulator, although with inaccurate name vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or similar, depending on the SoC) used by UFS controller. Bring back handling of this supply by using more appropriate regulator - UFS controller host supply. This also fixes dtbs_check warning: msm8998-mtp.dtb: phy@1da7000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230905161920.252013-10-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: msm8998-pro1: correct UFS pad supplyKrzysztof Kozlowski1-1/+1
The Qualcomm UFS phy switched from dedicated driver to QMP phy driver. Eventually the old driver was removed in commit 02dca8c981b5 ("phy: qcom: remove ufs qmp phy driver"). The original driver and its binding used vddp-ref-clk regulator supply, but the new one did not and left the supply unused. The Qualcomm UFS phy bindings were also migrated to newer ones and dropped support for vddp-ref-clk regulator in commit dc5cb63592bd ("dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml"). It turns out that this regulator, although with inaccurate name vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or similar, depending on the SoC) used by UFS controller. Bring back handling of this supply by using more appropriate regulator - UFS controller host supply. This also fixes dtbs_check warning: msm8998-fxtec-pro1.dtb: phy@1da7000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230905161920.252013-9-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: msm8996-gemini: correct UFS pad supplyKrzysztof Kozlowski1-1/+1
The Qualcomm UFS phy switched from dedicated driver to QMP phy driver. Eventually the old driver was removed in commit 02dca8c981b5 ("phy: qcom: remove ufs qmp phy driver"). The original driver and its binding used vddp-ref-clk regulator supply, but the new one did not and left the supply unused. The Qualcomm UFS phy bindings were also migrated to newer ones and dropped support for vddp-ref-clk regulator in commit dc5cb63592bd ("dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml"). It turns out that this regulator, although with inaccurate name vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or similar, depending on the SoC) used by UFS controller. Bring back handling of this supply by using more appropriate regulator - UFS controller host supply. This also fixes dtbs_check warning: msm8996-xiaomi-gemini.dtb: phy@627000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230905161920.252013-8-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: msm8996-oneplus: correct UFS pad supplyKrzysztof Kozlowski1-1/+1
The Qualcomm UFS phy switched from dedicated driver to QMP phy driver. Eventually the old driver was removed in commit 02dca8c981b5 ("phy: qcom: remove ufs qmp phy driver"). The original driver and its binding used vddp-ref-clk regulator supply, but the new one did not and left the supply unused. The Qualcomm UFS phy bindings were also migrated to newer ones and dropped support for vddp-ref-clk regulator in commit dc5cb63592bd ("dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml"). It turns out that this regulator, although with inaccurate name vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or similar, depending on the SoC) used by UFS controller. Bring back handling of this supply by using more appropriate regulator - UFS controller host supply. This also fixes dtbs_check warning: msm8996-oneplus3t.dtb: phy@627000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230905161920.252013-7-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: apq8096-db820c: correct UFS pad supplyKrzysztof Kozlowski1-1/+1
The Qualcomm UFS phy switched from dedicated driver to QMP phy driver. Eventually the old driver was removed in commit 02dca8c981b5 ("phy: qcom: remove ufs qmp phy driver"). The original driver and its binding used vddp-ref-clk regulator supply, but the new one did not and left the supply unused. The Qualcomm UFS phy bindings were also migrated to newer ones and dropped support for vddp-ref-clk regulator in commit dc5cb63592bd ("dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml"). It turns out that this regulator, although with inaccurate name vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or similar, depending on the SoC) used by UFS controller. Bring back handling of this supply by using more appropriate regulator - UFS controller host supply. This also fixes dtbs_check warning: apq8096-db820c.dtb: phy@627000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230905161920.252013-6-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm6115p-j606f: correct UFS pad supplyKrzysztof Kozlowski1-1/+1
The Qualcomm UFS phy switched from dedicated driver to QMP phy driver. Eventually the old driver was removed in commit 02dca8c981b5 ("phy: qcom: remove ufs qmp phy driver"). The original driver and its binding used vddp-ref-clk regulator supply, but the new one did not and left the supply unused. The Qualcomm UFS phy bindings were also migrated to newer ones and dropped support for vddp-ref-clk regulator in commit dc5cb63592bd ("dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml"). It turns out that this regulator, although with inaccurate name vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or similar, depending on the SoC) used by UFS controller. Bring back handling of this supply by using more appropriate regulator - UFS controller host supply. This also fixes dtbs_check warning: sm6115p-lenovo-j606f.dtb: phy@4807000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230905161920.252013-5-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm6115-pro1x: correct UFS pad supplyKrzysztof Kozlowski1-1/+1
The Qualcomm UFS phy switched from dedicated driver to QMP phy driver. Eventually the old driver was removed in commit 02dca8c981b5 ("phy: qcom: remove ufs qmp phy driver"). The original driver and its binding used vddp-ref-clk regulator supply, but the new one did not and left the supply unused. The Qualcomm UFS phy bindings were also migrated to newer ones and dropped support for vddp-ref-clk regulator in commit dc5cb63592bd ("dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml"). It turns out that this regulator, although with inaccurate name vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or similar, depending on the SoC) used by UFS controller. Bring back handling of this supply by using more appropriate regulator - UFS controller host supply. This also fixes dtbs_check warning: sm6115-fxtec-pro1x.dtb: phy@4807000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230905161920.252013-4-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm6125-sprout: correct UFS pad supplyKrzysztof Kozlowski1-1/+1
The Qualcomm UFS phy switched from dedicated driver to QMP phy driver. Eventually the old driver was removed in commit 02dca8c981b5 ("phy: qcom: remove ufs qmp phy driver"). The original driver and its binding used vddp-ref-clk regulator supply, but the new one did not and left the supply unused. The Qualcomm UFS phy bindings were also migrated to newer ones and dropped support for vddp-ref-clk regulator in commit dc5cb63592bd ("dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml"). It turns out that this regulator, although with inaccurate name vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or similar, depending on the SoC) used by UFS controller. Bring back handling of this supply by using more appropriate regulator - UFS controller host supply. This also fixes dtbs_check warning: sm6125-xiaomi-laurel-sprout.dtb: phy@4807000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230905161920.252013-3-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm6125-sprout: drop incorrect UFS phy max currentKrzysztof Kozlowski1-2/+0
Neither bindings nor UFS phy driver use properties like 'vdda-phy-max-microamp' and 'vdda-pll-max-microamp': sm6125-xiaomi-laurel-sprout.dtb: phy@4807000: 'vdda-phy-max-microamp', 'vdda-pll-max-microamp' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230905161920.252013-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: ipq6018: Fix tcsr_mutex register sizeVignesh Viswanathan1-1/+1
IPQ6018's TCSR Mutex HW lock register has 32 locks of size 4KB each. Total size of the TCSR Mutex registers is 128KB. Fix size of the tcsr_mutex hwlock register to 0x20000. Changes in v2: - Drop change to remove qcom,ipq6018-tcsr-mutex compatible string - Added Fixes and stable tags Cc: stable@vger.kernel.org Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes") Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230905095535.1263113-2-quic_viswanat@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: ipq9574: Fix hwlock index for SMEMVignesh Viswanathan1-1/+1
SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations in SMEM region shared by the Host and FW. Fix the SMEM hwlock index to 3 for IPQ9574. Cc: stable@vger.kernel.org Fixes: 46384ac7a618 ("arm64: dts: qcom: ipq9574: Add SMEM support") Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230904172516.479866-5-quic_viswanat@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: ipq6018: Fix hwlock index for SMEMVignesh Viswanathan1-1/+1
SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations in SMEM region shared by the Host and FW. Fix the SMEM hwlock index to 3 for IPQ6018. Cc: stable@vger.kernel.org Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes") Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230904172516.479866-3-quic_viswanat@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: ipq5332: Fix hwlock index for SMEMVignesh Viswanathan1-1/+1
SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations in SMEM region shared by the Host and FW. Fix the SMEM hwlock index to 3 for IPQ5332. Cc: stable@vger.kernel.org Fixes: d56dd7f935e1 ("arm64: dts: qcom: ipq5332: add SMEM support") Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230904172516.479866-2-quic_viswanat@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: ipq8074: Fix hwlock index for SMEMVignesh Viswanathan1-1/+1
SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations in SMEM region shared by the Host and FW. Fix the SMEM hwlock index to 3 for IPQ8074. Cc: stable@vger.kernel.org Fixes: 42124b947e8e ("arm64: dts: qcom: ipq8074: add SMEM support") Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230904172516.479866-4-quic_viswanat@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: msm8916-samsung-j5-common: Add accelerometerMarkuss Broks3-0/+59
J5 and J5X have ST LIS2HH12 accelerometer. Add support for it. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Co-developed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Co-developed-by: Lin, Meng-Bo <linmengbo0689@protonmail.com> Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230904123123.2593-1-linmengbo0689@protonmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: split pmr735d into 2Neil Armstrong4-47/+63
The second PMR735D PMIC is not always presend on SM8550 based devices, split the pmr735d.dtsi file in two so boards files can only include the ones present on the platform. Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230831-topic-sm8550-upstream-pmr735d-split-v1-1-98e632636415@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: ipq5332: Enable USBVaradarajan Narayanan1-0/+23
Enable USB2 in host mode. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/d4c20505dd2103b5421eab7602aec4f83bd62dbe.1693468292.git.quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: ipq5332: Add USB related nodesVaradarajan Narayanan1-0/+55
Add USB phy and controller nodes. Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/f25777bfe2c84e203b7615527607900b756c51bd.1693468292.git.quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm7225-fp4: Revert "arm64: dts: qcom: sm7225-fairphone-fp4: Add AW8695 haptics"Krzysztof Kozlowski1-27/+1
This reverts commit 413821b7777d062b57f8dc66ab088ed390cbc3ec because it was never reviewed, was buggy (report from kernel test robot: https://lore.kernel.org/all/202204090333.QZXMI2tu-lkp@intel.com/) and used undocumented, broken bindings. Half of the properties in this device are questioned, thus adding DTS node causes only errors and does not make the device usable without the bindings and driver part: sm7225-fairphone-fp4.dtb: haptics@5a: failed to match any schema with compatible: ['awinic,aw8695'] sm7225-fairphone-fp4.dtb: haptics@5a: awinic,tset: b'\x12' is not of type 'object', 'array', 'boolean', 'null' sm7225-fairphone-fp4.dtb: haptics@5a: awinic,r-spare: b'h' is not of type 'object', 'array', 'boolean', 'null' Since bindings were abandoned (4 months since review), revert the commit to avoid false sense of supporting something which is not supported. Cc: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20230827122842.63741-3-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sc8180x: drop incorrect cell-index from SPMIKrzysztof Kozlowski1-1/+0
The SPMI controller (PMIC Arbiter) does not use nor allow 'cell-index' property: sc8180x-primus.dtb: spmi@c440000: Unevaluated properties are not allowed ('cell-index' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230827122842.63741-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: msm8939-longcheer-l9100: Add initial device treeAndré Apitzsch2-0/+335
This dts adds support for BQ Aquaris M5 (Longcheer L9100) released in 2015. Add a device tree with initial support for: - GPIO keys - Hall sensor - SDHCI - WCNSS (BT/WIFI) - Accelerometer/Magnetometer - Vibrator - Touchscreen - Front flash Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: André Apitzsch <git@apitzsch.eu> Link: https://lore.kernel.org/r/20230827-bq_m5-v4-2-f8435fb8f955@apitzsch.eu Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19dt-bindings: arm: qcom: Add BQ Aquaris M5André Apitzsch1-0/+1
Add a compatible for BQ Aquaris M5 (Longcheer L9100). Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: André Apitzsch <git@apitzsch.eu> Link: https://lore.kernel.org/r/20230827-bq_m5-v4-1-f8435fb8f955@apitzsch.eu Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sdm845-mtp: enable PCIe supportDmitry Baryshkov1-0/+78
Enable two PCIe hosts support on Qualcomm SDM845 MTP board. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230826221915.846937-6-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sdm845-mtp: enable Vol-/reset buttonDmitry Baryshkov1-0/+5
Wire up the Vol- / reset button on Qualcomm SDM845 MTP board. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230826221915.846937-5-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sdm845-mtp: switch to mbn firmwareDmitry Baryshkov1-2/+2
We have switched most of devices to use mbn (squashed) firmware files instead of spit mdt+bNN. Even this DT uses modem.mbn and a630_zap.mbn. Let's switch adsp and cdsp firmware files to use .mbn format too. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230826221915.846937-4-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sdm845-mtp: specify wifi variantDmitry Baryshkov1-0/+1
Specify the variant for the WiFi BDF file, "Qualcomm_sdm845mtp" to ease distinguishing from other (possible) devices using the same board id. For the reference: ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0x3f soc_id 0x40030001 ath10k_snoc 18800000.wifi: qmi fw_version 0x2009856b fw_build_timestamp 2018-07-19 12:28 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 ath10k_snoc 18800000.wifi: failed to fetch board data for bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp from ath10k/WCN3990/hw1.0/board-2.bin ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000 ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0 ath10k_snoc 18800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790 ath10k_snoc 18800000.wifi: htt-ver 3.53 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1 ath10k_snoc 18800000.wifi: invalid MAC address; choosing random Cc: Kalle Valo <kvalo@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230826221915.846937-3-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sdm845-mtp: fix WiFi configurationDmitry Baryshkov1-0/+2
Enable the host-cap-8bit quirk on this device. It is required for the WiFi to function properly. Fixes: 022bccb840b7 ("arm64: dts: sdm845: Add WCN3990 WLAN module device node") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230826221915.846937-2-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm8350-hdk: add pmr735a regulatorsDmitry Baryshkov1-0/+75
The SM8350 HDK uses pmr735a to supply some of the voltages (e.g. to WiFi/BT chip). Declare corresponding regulators together with voltage boundaries. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230825214550.1650938-3-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm8350-hdk: add missing PMICsDmitry Baryshkov1-0/+5
Include configuration for several PMICs presend on the board. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230825214550.1650938-2-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sm8350: fix pinctrl for UART18Dmitry Baryshkov1-1/+1
On sm8350 QUP18 uses GPIO 68/69, not 58/59. Fix correponding UART18 pinconf configuraion. Fixes: 98374e6925b8 ("arm64: dts: qcom: sm8350: Set up WRAP2 QUPs") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230825214550.1650938-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sdm845-tama: Add camera GPIO regulatorsKonrad Dybcio1-0/+57
Like on many other platforms, Tama devices utilize lots of GPIO- enabled regulators for the camera sensors. Define them in the DT. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230824-topic-tama_gpio-v1-3-014e9d198dce@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sdm845-tama: Add GPIO line names for PMIC GPIOsKonrad Dybcio4-0/+85
Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the Akari, Apollo & Akatsuki DTS-es to better document the hardware. pm8005 and pm8998 config is common for all three boards. Apollo has VIB_LDO_EN (replacing NC) on PMI8998_GPIO_5 Akari and Akatsuki have WLC_EN_N (replacing NC) on PMI8998_GPIO_8 Akari additionally has RSVD(WLC_EN_N) (replacing) on PMI8998_GPIO_11 which sounds a bit like a forgot-to-update-documentation, but maybe it differs between SKUs.. Time will tell, when we get to enabling the wireless charger. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230824-topic-tama_gpio-v1-2-014e9d198dce@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: sdm845-tama: Add GPIO line names for TLMMKonrad Dybcio3-0/+457
Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the Akari, Apollo & Akatsuki DTS-es to better document the hardware. Apollo can be considered the 'base configuration'. Akari brings WLC_INT_N on GPIO_31 over that. Akatsuki & Akari diff: < "NC", > "SAMD_RSTEN_N", < "NC", > "MASTER_RST_N", < "NC", > "DISP_ERR_FG", < "NC", > "SAMD_BOOTL_PIN", < "NC", < "NC", < "NC", /* GPIO_60 */ > "SDM_SWD_CLK", > "SDM_SWD_DAT", > "SAMD_RST", /* GPIO_60 */ < "NC", > "MODE_SEL2", < "NC", > "NFC_ESE_PWR_REQ", < "NC", > "TS_VDDIO_EN", Which makes sense, as Akari and Akatsuki have a wireless charger and Akatsuki also additionally has a super-high-end-complex-for-the-time Samsung OLED display, as opposed to LCDs on the other Tama devices. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230824-topic-tama_gpio-v1-1-014e9d198dce@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-09-19arm64: dts: qcom: Add support for the Xiaomi SM7125 platformDavid Wronek3-0/+440
There are 6 Xiaomi smartphones with the SM7125 SoC: - POCO M2 Pro (gram) - Redmi Note 9S (curtana) - Redmi Note 9 Pro (Global, joyeuse) - Redmi Note 9 Pro (India, curtana) - Redmi Note 9 Pro Max (excalibur) - Redmi Note 10 Lite (curtana) These devices share a common board design (a.k.a miatoll) with only a few differences. Add support for the common board, as well as support for the global Redmi Note 9 Pro. Signed-off-by: David Wronek <davidwronek@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230824091737.75813-5-davidwronek@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>