aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2023-02-16dmaengine: imx-sdma: Set DMA channel to be privateKai-Heng Feng1-0/+1
If async-tx is loaded before device drivers that requires imx-sdma, the dmaengine_get() routine from async-tx grabs all non-private channels, so devices that require DMA fail to work. So mark imx-sdma with DMA_PRIVATE to avoid such situation. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20230207045745.1029959-1-kai.heng.feng@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dmaengine: dw: Move check for paused channel to dwc_get_residue()Andy Shevchenko1-6/+5
Move check for paused channel to dwc_get_residue() and rename the latter to dwc_get_residue_and_status(). This improves data integrity as residue and DMA channel status are set in the same function under the same conditions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230130151747.20704-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dmaengine: ptdma: check for null desc before calling pt_cmd_callbackEric Pilmore1-1/+1
Resolves a panic that can occur on AMD systems, typically during host shutdown, after the PTDMA driver had been exercised. The issue was the pt_issue_pending() function is mistakenly assuming that there will be at least one descriptor in the Submitted queue when the function is called. However, it is possible that both the Submitted and Issued queues could be empty, which could result in pt_cmd_callback() being mistakenly called with a NULL pointer. Ref: Bugzilla Bug 216856. Fixes: 6fa7e0e836e2 ("dmaengine: ptdma: fix concurrency issue with multiple dma transfer") Signed-off-by: Eric Pilmore <epilmore@gigaio.com> Link: https://lore.kernel.org/r/20230210075142.58253-1-epilmore@gigaio.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dmaengine: dw-axi-dmac: Do not dereference NULL structureKees Cook1-2/+0
If "vdesc" is NULL, it cannot be used with vd_to_axi_desc(). Leave "bytes" unchanged at 0. Seen under GCC 13 with -Warray-bounds: ../drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c: In function 'dma_chan_tx_status': ../drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c:329:46: warning: array subscript 0 is outside array bounds of 'struct virt_dma_desc[46116860184273879]' [-Warray-bounds=] 329 | bytes = vd_to_axi_desc(vdesc)->length; | ^~ Fixes: 8e55444da65c ("dmaengine: dw-axi-dmac: Support burst residue granularity") Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230127223623.never.507-kees@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dmaengine: idxd: Fix default allowed read buffers value in groupFenghua Yu2-6/+11
Currently default read buffers that is allowed in a group is 0. grpcfg will be configured to max read buffers that IDXD can support if the group's allowed read buffers value is 0. But 0 is an invalid read buffers value and user may get confused when seeing the invalid initial value 0 through sysfs interface. To show only valid allowed read buffers value and eliminate confusion, directly initialize the allowed read buffers to IDXD's max read buffers. User still can change the value through sysfs interface. Suggested-by: Ramesh Thomas <ramesh.thomas@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230127192855.966929-1-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dmaengine: sf-pdma: pdma_desc memory leak fixShravan Chippa2-3/+1
Commit b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a DMA channel") changed sf_pdma_prep_dma_memcpy() to unconditionally allocate a new sf_pdma_desc each time it is called. The driver previously recycled descs, by checking the in_use flag, only allocating additional descs if the existing one was in use. This logic was removed in commit b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a DMA channel"), but sf_pdma_free_desc() was not changed to handle the new behaviour. As a result, each time sf_pdma_prep_dma_memcpy() is called, the previous descriptor is leaked, over time leading to memory starvation: unreferenced object 0xffffffe008447300 (size 192): comm "irq/39-mchp_dsc", pid 343, jiffies 4294906910 (age 981.200s) hex dump (first 32 bytes): 00 00 00 ff 00 00 00 00 b8 c1 00 00 00 00 00 00 ................ 00 00 70 08 10 00 00 00 00 00 00 c0 00 00 00 00 ..p............. backtrace: [<00000000064a04f4>] kmemleak_alloc+0x1e/0x28 [<00000000018927a7>] kmem_cache_alloc+0x11e/0x178 [<000000002aea8d16>] sf_pdma_prep_dma_memcpy+0x40/0x112 Add the missing kfree() to sf_pdma_free_desc(), and remove the redundant in_use flag. Fixes: b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a DMA channel") Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230120100623.3530634-1-shravan.chippa@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-10dmaengine: Simplify dmaenginem_async_device_register() functionAndy Shevchenko1-16/+4
Use devm_add_action_or_reset() instead of devres_alloc() and devres_add(), which works the same. This will simplify the code. There is no functional changes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230130112830.52353-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-10dmaengine: use sysfs_emit() to instead of scnprintf()Andy Shevchenko1-3/+3
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230130111141.59627-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-10dmaengine: Make an order in struct dma_device definitionAndy Shevchenko1-6/+7
Make an order in struct dma_device: - added missing kernel doc descriptions - put descriptions in the order of appearance in the code - updated indentation where it makes sense Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230130110503.52250-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-10dt-bindings: dma: cleanup examples - indentation, lowercase hexKrzysztof Kozlowski2-26/+26
Cleanup examples: - use 4-space indentation (for cases when it is neither 4 not 2 space), - use lowercase hex, - drop unused node's label. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230124081117.31186-2-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-10dt-bindings: dma: drop unneeded quotesKrzysztof Kozlowski30-30/+30
Cleanup by removing unneeded quotes from refs and redundant blank lines. No functional impact except adjusting to preferred coding style. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> # mediatek Acked-by: Rob Herring <robh@kernel.org> Acked-by: Hector Martin <marcan@marcan.st> # apple Acked-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # Spear Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # Renesas Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> # Socionext Link: https://lore.kernel.org/r/20230124081117.31186-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-10dmaengine: xilinx: xdma: Add user logic interrupt supportLizhi Hou3-0/+98
The Xilinx DMA/Bridge Subsystem for PCIe (XDMA) provides up to 16 user interrupt wires to user logic that generate interrupts to the host. This patch adds APIs to enable/disable user logic interrupt for a given interrupt wire index. Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Signed-off-by: Sonal Santan <sonal.santan@amd.com> Signed-off-by: Max Zhen <max.zhen@amd.com> Signed-off-by: Brian Xu <brian.xu@amd.com> Tested-by: Martin Tuma <tumic@gpxsee.org> Link: https://lore.kernel.org/r/1674145926-29449-3-git-send-email-lizhi.hou@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-10dmaengine: xilinx: xdma: Add xilinx xdma driverLizhi Hou6-0/+1118
Add driver to enable PCIe board which uses XDMA (the DMA/Bridge Subsystem for PCI Express). For example, Xilinx Alveo PCIe devices. https://www.xilinx.com/products/boards-and-kits/alveo.html The XDMA engine support up to 4 Host to Card (H2C) and 4 Card to Host (C2H) channels. Memory transfers are specified on a per-channel basis in descriptor linked lists, which the DMA fetches from host memory and processes. Events such as descriptor completion and errors are signaled using interrupts. The hardware detail is provided by https://docs.xilinx.com/r/en-US/pg195-pcie-dma/Introduction This driver implements dmaengine APIs. - probe the available DMA channels - use dma_slave_map for channel lookup - use virtual channel to manage dmaengine tx descriptors - implement device_prep_slave_sg callback to handle host scatter gather list - implement device_config to config device address for DMA transfer Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Signed-off-by: Sonal Santan <sonal.santan@amd.com> Signed-off-by: Max Zhen <max.zhen@amd.com> Signed-off-by: Brian Xu <brian.xu@amd.com> Tested-by: Martin Tuma <tumic@gpxsee.org> Link: https://lore.kernel.org/r/1674145926-29449-2-git-send-email-lizhi.hou@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18dmaengine: drivers: Use devm_platform_ioremap_resource()Tudor Ambarus29-100/+36
platform_get_resource() and devm_ioremap_resource() are wrapped up in the devm_platform_ioremap_resource() helper. Use the helper and get rid of the local variable for struct resource *. We now have a function call less. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20221110152528.7821-1-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18dmaengine: at_xdmac: remove empty lineClaudiu Beznea1-1/+0
Remove empty line. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221117131547.293044-4-claudiu.beznea@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18dmaengine: at_xdmac: add runtime pm supportClaudiu Beznea1-15/+202
Add runtime PM support which involves disabling/enabling controller's clocks on runtime PM suspend/resume ops. The runtime suspend/resume is done based on the work submitted to the controller: runtime resume is happening on at_xdmac_start_xfer() and runtime suspend on at_xdmac_tasklet(). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221117131547.293044-2-claudiu.beznea@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18dmaengine: at_xdmac: align properly function membersClaudiu Beznea1-1/+1
Align properly function members. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221117131547.293044-3-claudiu.beznea@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18dmaengine: ppc4xx: Convert to use sysfs_emit()/sysfs_emit_at() APIsye xingchen1-7/+5
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202212061714501297954@zte.com.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18dmaengine: sun6i: Set the maximum segment sizeSamuel Holland1-0/+3
The sun6i DMA engine supports segment sizes up to 2^25-1 bytes. This is explicitly stated in newer SoC documentation (H6, D1), and it is implied in older documentation by the 25-bit width of the "bytes left in the current segment" register field. Exposing the real segment size limit (instead of the 64k default) reduces the number of SG list segments needed for a transaction. Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20230101193605.50285-1-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-17dmaengine: ti: k3-udma: remove non-fatal probe deferral logJayesh Choudhary1-1/+0
Drop the non-fatal probe deferral log for getting MSI domain. This makes the kernel log clean and we do not get recurring logs stating: "Failed to get MSI domain". Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20230117051855.29644-1-j-choudhary@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dt-bindings: dma: qcom: gpi: add compatible for sm8550Neil Armstrong1-0/+1
The Qualcomm SM8550 uses GPI DMA for its GENI interface. Add a compatible string for it in the documentation by using the SM6350 as fallback. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-gpi-v1-0-33b28a227c5d@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dmaengine: imx-sdma: support hdmi in sdmaJoy Zou2-8/+31
The hdmi script already supported in sdma firmware. So add support hdmi in sdma driver. The design of hdmi script is different from common script such as sai. There is no need to config buffer descriptor for HDMI. The cyclic capability is achieved by the hdmi script. The slave config is so simple, only config src_addr, dts_addr and direction DMA_TRANS_NONE. Signed-off-by: Joy Zou <joy.zou@nxp.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20221115093823.2879128-3-joy.zou@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dt-bindings: fsl-imx-sdma: Convert imx sdma to DT schemaJoy Zou2-118/+149
Convert the i.MX SDMA binding to DT schema format using json-schema. The compatibles fsl,imx31-to1-sdma, fsl,imx31-to2-sdma, fsl,imx35-to1-sdma and fsl,imx35-to2-sdma are not used. So need to delete it. The compatibles fsl,imx50-sdma, fsl,imx6sll-sdma and fsl,imx6sl-sdma are added. The original binding don't list all compatible used. In addition, add new peripheral types HDMI Audio. Signed-off-by: Joy Zou <joy.zou@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221115093823.2879128-2-joy.zou@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dmaengine: HISI_DMA should depend on ARCH_HISIGeert Uytterhoeven1-1/+1
The HiSilicon DMA Engine is only present on HiSilicon SoCs. Hence add a dependency on ARCH_HISI, to prevent asking the user about this driver when configuring a kernel without HiSilicon SoC support. Fixes: e9f08b65250d73ab ("dmaengine: hisilicon: Add Kunpeng DMA engine support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/363a1816d36cd3cf604d88ec90f97c75f604de64.1669044190.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dmaengine: idxd: Set traffic class values in GRPCFG on DSA 2.0Fenghua Yu3-4/+4
On DSA/IAX 1.0, TC-A and TC-B in GRPCFG are set as 1 to have best performance and cannot be changed through sysfs knobs unless override option is given. The same values should be set on DSA 2.0 as well. Fixes: ea7c8f598c32 ("dmaengine: idxd: restore traffic class defaults after wq reset") Fixes: ade8a86b512c ("dmaengine: idxd: Set defaults for GRPCFG traffic class") Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20221209172141.562648-1-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dmaengine: idxd: Remove the unused function set_completion_address()Jiapeng Chong1-6/+0
The function set_completion_address is defined in the dma.c file, but not called elsewhere, so remove this unused function. drivers/dma/idxd/dma.c:66:20: warning: unused function 'set_completion_address'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3416 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20221212033514.5831-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dmaengine: ti: k3-udma: Add support for BCDMA CSI RXVignesh Raghavendra1-5/+32
BCDMA CSI RX present on AM62Ax SoC is a dedicated DMA for servicing Camera Serial Interface (CSI) IP. Add support for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20221213164304.1126945-6-vigneshr@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dmaengine: ti: k3-udma: Add support for DMAs on AM62A SoCVignesh Raghavendra1-0/+1
AM62A SoC has a BCDMA and PKTDMA as systems DMAs for service various peripherals similar to AM64 SoC. Add support for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20221213164304.1126945-5-vigneshr@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dmaengine: ti: k3-psil-am62a: Add AM62Ax PSIL and PDMA dataJai Luthra4-1/+200
Add PSIL and PDMA data for AM62Ax SoC. Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20221213164304.1126945-4-vigneshr@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dmaengine: ti: k3-udma: Fix BCDMA for case w/o BCHANVignesh Raghavendra1-0/+3
Reusing loop iterator fails if BCHAN is not present as iterator is uninitialized Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20221213164304.1126945-3-vigneshr@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dt-bindings: dma: ti: k3-bcdma: Add bindings for BCDMA CSI RXVignesh Raghavendra1-18/+59
AM62A SoC has a dedicated BCDMA that serves Camera Serial Interface (CSI) IP. Add new compatible for the same. Unlike system BCDMA, this instance only has RX DMA channels and lack TX or block copy channel. Thus make those properties optional. Additionally CSI RX has independent power domain, add the binding for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20221213164304.1126945-2-vigneshr@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dt-bindings: dmaengine: qcom: gpi: Add QDU1000/QRU1000 gpi deviceMelody Olvera1-0/+1
Add compatible for gpi on QDU1000 and QRU1000 SoCs. Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221216231513.25085-1-quic_molvera@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dt-bindings: dma: fsl-mxs-dma: Convert MXS DMA to DT schemaMarek Vasut2-60/+80
Convert the MXS DMA binding to DT schema format using json-schema. Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c in Linux kernel does not use it, the property contains duplicate array entries in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get rid of that optional property altogether. Update example node names to be standard dma-controller@ , add global interrupt-parent property into example. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221219093713.328776-1-marex@denx.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dt-bindings: dma: gpi: Document SM6125 compatibleMartin Botka1-0/+1
Document compatibility for this GPI DMA controller on SM6125. Signed-off-by: Martin Botka <martin.botka@somainline.org> [Marijn: Move compatible to the list with qcom,sdm845-gpi-dma] Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221222194600.139854-2-marijn.suijten@somainline.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-25Linux 6.2-rc1Linus Torvalds1-2/+2
2022-12-25treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)69-97/+97
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-12-23pstore: Properly assign mem_type propertyLuca Stefani1-1/+1
If mem-type is specified in the device tree it would end up overriding the record_size field instead of populating mem_type. As record_size is currently parsed after the improper assignment with default size 0 it continued to work as expected regardless of the value found in the device tree. Simply changing the target field of the struct is enough to get mem-type working as expected. Fixes: 9d843e8fafc7 ("pstore: Add mem_type property DT parsing support") Cc: stable@vger.kernel.org Signed-off-by: Luca Stefani <luca@osomprivacy.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221222131049.286288-1-luca@osomprivacy.com
2022-12-23pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXESJohn Stultz1-0/+1
In commit 76d62f24db07 ("pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion") I changed a lock to an rt_mutex. However, its possible that CONFIG_RT_MUTEXES is not enabled, which then results in a build failure, as the 0day bot detected: https://lore.kernel.org/linux-mm/202212211244.TwzWZD3H-lkp@intel.com/ Thus this patch changes CONFIG_PSTORE_PMSG to select CONFIG_RT_MUTEXES, which ensures the build will not fail. Cc: Wei Wang <wvw@google.com> Cc: Midas Chien<midaschieh@google.com> Cc: Connor O'Brien <connoro@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: kernel test robot <lkp@intel.com> Cc: kernel-team@android.com Fixes: 76d62f24db07 ("pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221221051855.15761-1-jstultz@google.com
2022-12-23cfi: Fix CFI failure with KASANSami Tolvanen1-3/+0
When CFI_CLANG and KASAN are both enabled, LLVM doesn't generate a CFI type hash for asan.module_ctor functions in translation units where CFI is disabled, which leads to a CFI failure during boot when do_ctors calls the affected constructors: CFI failure at do_basic_setup+0x64/0x90 (target: asan.module_ctor+0x0/0x28; expected type: 0xa540670c) Specifically, this happens because CFI is disabled for kernel/cfi.c. There's no reason to keep CFI disabled here anymore, so fix the failure by not filtering out CC_FLAGS_CFI for the file. Note that https://reviews.llvm.org/rG3b14862f0a96 fixed the issue where LLVM didn't emit CFI type hashes for any sanitizer constructors, but now type hashes are emitted correctly for TUs that use CFI. Link: https://github.com/ClangBuiltLinux/linux/issues/1742 Fixes: 89245600941e ("cfi: Switch to -fsanitize=kcfi") Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221222225747.3538676-1-samitolvanen@google.com
2022-12-22perf python: Fix splitting CC into compiler and optionsArnaldo Carvalho de Melo1-2/+11
Noticed this build failure on archlinux:base when building with clang: clang-14: error: optimization flag '-ffat-lto-objects' is not supported [-Werror,-Wignored-optimization-argument] In tools/perf/util/setup.py we check if clang supports that option, but since commit 3cad53a6f9cdbafa ("perf python: Account for multiple words in CC") this got broken as in the common case where CC="clang": >>> cc="clang" >>> print(cc.split()[0]) clang >>> option="-ffat-lto-objects" >>> print(str(cc.split()[1:]) + option) []-ffat-lto-objects >>> And then the Popen will call clang with that bogus option name that in turn will not produce the b"unknown argument" or b"is not supported" that this function uses to detect if the option is not available and thus later on clang will be called with an unknown/unsupported option. Fix it by looking if really there are options in the provided CC variable, and if so override 'cc' with the first token and append the options to the 'option' variable. Fixes: 3cad53a6f9cdbafa ("perf python: Account for multiple words in CC") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Keeping <john@metanate.com> Cc: Khem Raj <raj.khem@gmail.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Link: http://lore.kernel.org/lkml/Y6Rq5F5NI0v1QQHM@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-22afs: Stop implementing ->writepage()David Howells3-37/+50
We're trying to get rid of the ->writepage() hook[1]. Stop afs from using it by unlocking the page and calling afs_writepages_region() rather than folio_write_one(). A flag is passed to afs_writepages_region() to indicate that it should only write a single region so that we don't flush the entire file in ->write_begin(), but do add other dirty data to the region being written to try and reduce the number of RPC ops. This requires ->migrate_folio() to be implemented, so point that at filemap_migrate_folio() for files and also for symlinks and directories. This can be tested by turning on the afs_folio_dirty tracepoint and then doing something like: xfs_io -c "w 2223 7000" -c "w 15000 22222" -c "w 23 7" /afs/my/test/foo and then looking in the trace to see if the write at position 15000 gets stored before page 0 gets dirtied for the write at position 23. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Christoph Hellwig <hch@lst.de> cc: Matthew Wilcox <willy@infradead.org> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/20221113162902.883850-1-hch@lst.de/ [1] Link: https://lore.kernel.org/r/166876785552.222254.4403222906022558715.stgit@warthog.procyon.org.uk/ # v1
2022-12-22afs: remove afs_cache_netfs and afs_zap_permits() declarationsGaosheng Cui1-8/+0
afs_zap_permits() has been removed since commit be080a6f43c4 ("afs: Overhaul permit caching"). afs_cache_netfs has been removed since commit 523d27cda149 ("afs: Convert afs to use the new fscache API"). so remove the declare for them from header file. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/20220909070353.1160228-1-cuigaosheng1@huawei.com/
2022-12-22afs: remove variable nr_serversColin Ian King1-5/+1
Variable nr_servers is no longer being used, the last reference to it was removed in commit 45df8462730d ("afs: Fix server list handling") so clean up the code by removing it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/20221020173923.21342-1-colin.i.king@gmail.com/
2022-12-22afs: Fix lost servers_outstanding countDavid Howells1-1/+4
The afs_fs_probe_dispatcher() work function is passed a count on net->servers_outstanding when it is scheduled (which may come via its timer). This is passed back to the work_item, passed to the timer or dropped at the end of the dispatcher function. But, at the top of the dispatcher function, there are two checks which skip the rest of the function: if the network namespace is being destroyed or if there are no fileservers to probe. These two return paths, however, do not drop the count passed to the dispatcher, and so, sometimes, the destruction of a network namespace, such as induced by rmmod of the kafs module, may get stuck in afs_purge_servers(), waiting for net->servers_outstanding to become zero. Fix this by adding the missing decrements in afs_fs_probe_dispatcher(). Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/167164544917.2072364.3759519569649459359.stgit@warthog.procyon.org.uk/
2022-12-22ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 WirelessJaroslav Kysela9-12/+60
It seems that the firmware is broken and does not accept the UAC_EP_CS_ATTR_SAMPLE_RATE URB. There is only one rate (48000Hz) available in the descriptors for the output endpoint. Create a new quirk QUIRK_FLAG_FIXED_RATE to skip the rate setup when only one rate is available (fixed). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216798 Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20221215153037.1163786-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-12-22ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()Jiapeng Chong1-9/+0
The function snd_azf3328_codec_outl is defined in the azt3328.c file, but not called elsewhere, so remove this unused function. sound/pci/azt3328.c:367:1: warning: unused function 'snd_azf3328_codec_outl'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3432 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20221213061355.62856-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-12-21gcov: add support for checksum fieldRickard x Andersson1-0/+5
In GCC version 12.1 a checksum field was added. This patch fixes a kernel crash occurring during boot when using gcov-kernel with GCC version 12.2. The crash occurred on a system running on i.MX6SX. Link: https://lkml.kernel.org/r/20221220102318.3418501-1-rickaran@axis.com Fixes: 977ef30a7d88 ("gcov: support GCC 12.1 and newer compilers") Signed-off-by: Rickard x Andersson <rickaran@axis.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Tested-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Martin Liska <mliska@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-21test_maple_tree: add test for mas_spanning_rebalance() on insufficient dataLiam Howlett1-0/+23
Add a test to the maple tree test suite for the spanning rebalance insufficient node issue does not go undetected again. Link: https://lkml.kernel.org/r/20221219161922.2708732-3-Liam.Howlett@oracle.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-21maple_tree: fix mas_spanning_rebalance() on insufficient dataLiam Howlett1-1/+3
Mike Rapoport contacted me off-list with a regression in running criu. Periodic tests fail with an RCU stall during execution. Although rare, it is possible to hit this with other uses so this patch should be backported to fix the regression. This patchset adds the fix and a test case to the maple tree test suite. This patch (of 2): An insufficient node was causing an out-of-bounds access on the node in mas_leaf_max_gap(). The cause was the faulty detection of the new node being a root node when overwriting many entries at the end of the tree. Fix the detection of a new root and ensure there is sufficient data prior to entering the spanning rebalance loop. Link: https://lkml.kernel.org/r/20221219161922.2708732-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20221219161922.2708732-2-Liam.Howlett@oracle.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Mike Rapoport <rppt@kernel.org> Tested-by: Mike Rapoport <rppt@kernel.org> Cc: Andrei Vagin <avagin@gmail.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-21hugetlb: really allocate vma lock for all sharable vmasMike Kravetz1-185/+148
Commit bbff39cc6cbc ("hugetlb: allocate vma lock for all sharable vmas") removed the pmd sharable checks in the vma lock helper routines. However, it left the functional version of helper routines behind #ifdef CONFIG_ARCH_WANT_HUGE_PMD_SHARE. Therefore, the vma lock is not being used for sharable vmas on architectures that do not support pmd sharing. On these architectures, a potential fault/truncation race is exposed that could leave pages in a hugetlb file past i_size until the file is removed. Move the functional vma lock helpers outside the ifdef, and remove the non-functional stubs. Since the vma lock is not just for pmd sharing, rename the routine __vma_shareable_flags_pmd. Link: https://lkml.kernel.org/r/20221212235042.178355-1-mike.kravetz@oracle.com Fixes: bbff39cc6cbc ("hugetlb: allocate vma lock for all sharable vmas") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.