| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Of the three LSMs that implement the security_task_getsecid() LSM
hook, all three LSMs provide the task's objective security
credentials. This turns out to be unfortunate as most of the hook's
callers seem to expect the task's subjective credentials, although
a small handful of callers do correctly expect the objective
credentials.
This patch is the first step towards fixing the problem: it splits
the existing security_task_getsecid() hook into two variants, one
for the subjective creds, one for the objective creds.
void security_task_getsecid_subj(struct task_struct *p,
u32 *secid);
void security_task_getsecid_obj(struct task_struct *p,
u32 *secid);
While this patch does fix all of the callers to use the correct
variant, in order to keep this patch focused on the callers and to
ease review, the LSMs continue to use the same implementation for
both hooks. The net effect is that this patch should not change
the behavior of the kernel in any way, it will be up to the latter
LSM specific patches in this series to change the hook
implementations and return the correct credentials.
Acked-by: Mimi Zohar <zohar@linux.ibm.com> (IMA)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Keep track of whether or not there were LSM security context
options passed during mount (ie creation of the superblock).
Then, while deciding if the superblock can be shared for the new
mount, check if the newly passed in LSM security context options
are compatible with the existing superblock's ones by calling
security_sb_mnt_opts_compat().
Previously, with selinux enabled, NFS wasn't able to do the
following 2mounts:
mount -o vers=4.2,sec=sys,context=system_u:object_r:root_t:s0
<serverip>:/ /mnt
mount -o vers=4.2,sec=sys,context=system_u:object_r:swapfile_t:s0
<serverip>:/scratch /scratch
2nd mount would fail with "mount.nfs: an incorrect mount option was
specified" and var log messages would have:
"SElinux: mount invalid. Same superblock, different security
settings for.."
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
[PM: tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
In nfs_fill_super() passed in nfs_fs_context can never be NULL.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
[PM: tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Add a new hook that takes an existing super block and a new mount
with new options and determines if new options confict with an
existing mount or not.
A filesystem can use this new hook to determine if it can share
the an existing superblock with a new superblock for the new mount.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
[PM: tweak the subject line, fix tab/space problems]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
A typo is f out by codespell tool in 422th line of security.h:
$ codespell ./security/selinux/include/
./security.h:422: thie ==> the, this
Fix a typo found by codespell.
Signed-off-by: Xiong Zhenwu <xiong.zhenwu@zte.com.cn>
[PM: subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
A typo is found out by codespell tool in 16th line of hashtab.c
$ codespell ./security/selinux/ss/
./hashtab.c:16: rouding ==> rounding
Fix a typo found by codespell.
Signed-off-by: Xiong Zhenwu <xiong.zhenwu@zte.com.cn>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
SELinux stores the configuration state and the policy capabilities
in kernel memory. Changes to this data at runtime would have an impact
on the security guarantees provided by SELinux. Measuring this data
through IMA subsystem provides a tamper-resistant way for
an attestation service to remotely validate it at runtime.
Measure the configuration state and policy capabilities by calling
the IMA hook ima_measure_critical_data().
To enable SELinux data measurement, the following steps are required:
1, Add "ima_policy=critical_data" to the kernel command line arguments
to enable measuring SELinux data at boot time.
For example,
BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data
2, Add the following rule to /etc/ima/ima-policy
measure func=CRITICAL_DATA label=selinux
Sample measurement of SELinux state and policy capabilities:
10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b
Execute the following command to extract the measured data
from the IMA's runtime measurements list:
grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p
The output should be a list of key-value pairs. For example,
initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0;
To verify the measurement is consistent with the current SELinux state
reported on the system, compare the integer values in the following
files with those set in the IMA measurement (using the following commands):
- cat /sys/fs/selinux/enforce
- cat /sys/fs/selinux/checkreqprot
- cat /sys/fs/selinux/policy_capabilities/[capability_file]
Note that the actual verification would be against an expected state
and done on a separate system (likely an attestation server) requiring
"initialized=1;enforcing=1;checkreqprot=0;"
for a secure state and then whatever policy capabilities are actually
set in the expected policy (which can be extracted from the policy
itself via seinfo, for example).
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Now overlayfs allow unpriviliged mounts. That is root inside a non-init
user namespace can mount overlayfs. This is being added in 5.11 kernel.
Giuseppe tried to mount overlayfs with option "context" and it failed
with error -EACCESS.
$ su test
$ unshare -rm
$ mkdir -p lower upper work merged
$ mount -t overlay -o lowerdir=lower,workdir=work,upperdir=upper,userxattr,context='system_u:object_r:container_file_t:s0' none merged
This fails with -EACCESS. It works if option "-o context" is not specified.
Little debugging showed that selinux_set_mnt_opts() returns -EACCESS.
So this patch adds "overlay" to the list, where it is fine to specific
context from non init_user_ns.
Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
[PM: trimmed the changelog from the description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
|
|
In rxe_comp.c in rxe_completer() the function free_pkt() did not clear skb
which triggered a warning at 'done:' and could possibly at 'exit:'. The
WARN_ONCE() calls are not actually needed. The call to free_pkt() is
moved to the end to clearly show that all skbs are freed.
Fixes: 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
rxe_rcv_mcast_pkt() dropped a reference to ib_device when no error
occurred causing an underflow on the reference counter. This code is
cleaned up to be clearer and easier to read.
Fixes: 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When the noted patch below extending the reference taken by
rxe_get_dev_from_net() in rxe_udp_encap_recv() until each skb is freed it
was not matched by a reference in the loopback path resulting in
underflows.
Fixes: 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
45d189c606292 ("io_uring: replace force_nonblock with flags") did
something strange for io_openat() slicing all issue_flags but
IO_URING_F_NONBLOCK. Not a bug for now, but better to just forward the
flags.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have this weird true/false return from parking, and then some of the
callers decide to look at that. It can lead to unbalanced parks and
sqd locking. Have the callers check the thread status once it's parked.
We know we have the lock at that point, so it's either valid or it's NULL.
Fix race with parking on thread exit. We need to be careful here with
ordering of the sdq->lock and the IO_SQ_THREAD_SHOULD_PARK bit.
Rename sqd->completion to sqd->parked to reflect that this is the only
thing this completion event doesn.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we race with shutting down the io-wq context and someone queueing
a hashed entry, then we can exit the manager with it armed. If it then
triggers after the manager has exited, we can have a use-after-free where
io_wqe_hash_wake() attempts to wake a now gone manager process.
Move the killing of the hashed write queue into the manager itself, so
that we know we've killed it before the task exits.
Fixes: e941894eae31 ("io-wq: make buffered file write hashed work map per-ctx")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The callback can only be armed, if we get -EIOCBQUEUED returned. It's
important that we clear the WAITQ bit for other cases, otherwise we can
queue for async retry and filemap will assume that we're armed and
return -EAGAIN instead of just blocking for the IO.
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It doesn't make sense to wait for more events to come in, if we can't
even flush the overflow we already have to the ring. Return -EBUSY for
that condition, just like we do for attempts to submit with overflow
pending.
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This allows us to do task creation and setup without needing to use
completions to try and synchronize with the starting thread. Get rid of
the old io_wq_fork_thread() wrapper, and the 'wq' and 'worker' startup
completion events - we can now do setup before the task is running.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In case we have already established connection to nvmf target, it
shouldn't be allowed to change the model_number. E.g. if someone will
identify ctrl and get model_number of "my_model" later on will change
the model_numbel via configfs to "my_new_model" this will break the NVMe
specification for "Get Log Page – Persistent Event Log" that refers to
Model Number as: "This field contains the same value as reported in the
Model Number field of the Identify Controller data structure, bytes
63:24."
Although it doesn't mentioned explicitly that this field can't be
changed, we can assume it.
So allow setting this field only once: using configfs or in the first
identify ctrl operation.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Currently kato is initialized to NVME_DEFAULT_KATO for both
discovery & i/o controllers. This is a problem specifically
for non-persistent discovery controllers since it always ends
up with a non-zero kato value. Fix this by initializing kato
to zero instead, and ensuring various controllers are assigned
appropriate kato values as follows:
non-persistent controllers - kato set to zero
persistent controllers - kato set to NVMF_DEV_DISC_TMO
(or any positive int via nvme-cli)
i/o controllers - kato set to NVME_DEFAULT_KATO
(or any positive int via nvme-cli)
Signed-off-by: Martin George <marting@netapp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The hwmon pointer wont be NULL if the registration fails. Though the
exit code path will assign it to ctrl->hwmon_device. Later
nvme_hwmon_exit() will try to free the invalid pointer. Avoid this by
returning the error code from hwmon_device_register_with_info().
Fixes: ed7770f66286 ("nvme/hwmon: rework to avoid devm allocation")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add the NVME_QUIRK_NO_NS_DESC_LIST and NVME_QUIRK_IGNORE_DEV_SUBNQN
quirks for this buggy device.
Reported and tested in https://bugs.mageia.org/show_bug.cgi?id=28417
Signed-off-by: Pascal Terjan <pterjan@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
My 2TB SKC2000 showed the exact same symptoms that were provided
in 538e4a8c57 ("nvme-pci: avoid the deepest sleep state on
Kingston A2000 SSDs"), i.e. a complete NVME lockup that needed
cold boot to get it back.
According to some sources, the A2000 is simply a rebadged
SKC2000 with a slightly optimized firmware.
Adding the SKC2000 PCI ID to the quirk list with the same workaround
as the A2000 made my laptop survive a 5 hours long Yocto bootstrap
buildfest which reliably triggered the SSD lockup previously.
Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The kernel fails to fully detect these SSDs, only the character devices
are present:
[ 10.785605] nvme nvme0: pci function 0000:04:00.0
[ 10.876787] nvme nvme1: pci function 0000:81:00.0
[ 13.198614] nvme nvme0: missing or invalid SUBNQN field.
[ 13.198658] nvme nvme1: missing or invalid SUBNQN field.
[ 13.206896] nvme nvme0: Shutdown timeout set to 20 seconds
[ 13.215035] nvme nvme1: Shutdown timeout set to 20 seconds
[ 13.225407] nvme nvme0: 16/0/0 default/read/poll queues
[ 13.233602] nvme nvme1: 16/0/0 default/read/poll queues
[ 13.239627] nvme nvme0: Identify Descriptors failed (8194)
[ 13.246315] nvme nvme1: Identify Descriptors failed (8194)
Adding the NVME_QUIRK_NO_NS_DESC_LIST fixes this problem.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205679
Signed-off-by: Julian Einwag <jeinwag-nvme@marcapo.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
|
|
Open-iSCSI sends passthrough PDUs over netlink, but the kernel should be
verifying that the provided PDU header and data lengths fall within the
netlink message to prevent accessing beyond that in memory.
Cc: stable@vger.kernel.org
Reported-by: Adam Nichols <adam@grimm-co.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
As the iSCSI parameters are exported back through sysfs, it should be
enforcing that they never are more than PAGE_SIZE (which should be more
than enough) before accepting updates through netlink.
Change all iSCSI sysfs attributes to use sysfs_emit().
Cc: stable@vger.kernel.org
Reported-by: Adam Nichols <adam@grimm-co.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Protect the iSCSI transport handle, available in sysfs, by requiring
CAP_SYS_ADMIN to read it. Also protect the netlink socket by restricting
reception of messages to ones sent with CAP_SYS_ADMIN. This disables
normal users from being able to end arbitrary iSCSI sessions.
Cc: stable@vger.kernel.org
Reported-by: Adam Nichols <adam@grimm-co.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Provide a generic helper for setting up an io_uring worker. Returns a
task_struct so that the caller can do whatever setup is needed, then call
wake_up_new_task() to kick it into gear.
Add a kernel_clone_args member, io_thread, which tells copy_process() to
mark the task with PF_IO_WORKER.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Linked timeouts are fired asynchronously (i.e. soft-irq), and use
generic cancellation paths to do its stuff, including poking into io-wq.
The problem is that it's racy to access tctx->io_wq, as
io_uring_task_cancel() and others may be happening at this exact moment.
Mark linked timeouts with REQ_F_INLIFGHT for now, making sure there are
no timeouts before io-wq destraction.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of going into request internals, like checking req->file->f_op,
do match them based on REQ_F_INFLIGHT, it's set only when we want it to
be reliably cancelled.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Optional Forward Error Correction (FEC) code in dm-verity uses
Reed-Solomon code and should support roots from 2 to 24.
The error correction parity bytes (of roots lengths per RS block) are
stored on a separate device in sequence without any padding.
Currently, to access FEC device, the dm-verity-fec code uses dm-bufio
client with block size set to verity data block (usually 4096 or 512
bytes).
Because this block size is not divisible by some (most!) of the roots
supported lengths, data repair cannot work for partially stored parity
bytes.
This fix changes FEC device dm-bufio block size to "roots << SECTOR_SHIFT"
where we can be sure that the full parity data is always available.
(There cannot be partial FEC blocks because parity must cover whole
sectors.)
Because the optional FEC starting offset could be unaligned to this
new block size, we have to use dm_bufio_set_sector_offset() to
configure it.
The problem is easily reproduced using veritysetup, e.g. for roots=13:
# create verity device with RS FEC
dd if=/dev/urandom of=data.img bs=4096 count=8 status=none
veritysetup format data.img hash.img --fec-device=fec.img --fec-roots=13 | awk '/^Root hash/{ print $3 }' >roothash
# create an erasure that should be always repairable with this roots setting
dd if=/dev/zero of=data.img conv=notrunc bs=1 count=8 seek=4088 status=none
# try to read it through dm-verity
veritysetup open data.img test hash.img --fec-device=fec.img --fec-roots=13 $(cat roothash)
dd if=/dev/mapper/test of=/dev/null bs=4096 status=noxfer
# wait for possible recursive recovery in kernel
udevadm settle
veritysetup close test
With this fix, errors are properly repaired.
device-mapper: verity-fec: 7:1: FEC 0: corrected 8 errors
...
Without it, FEC code usually ends on unrecoverable failure in RS decoder:
device-mapper: verity-fec: 7:1: FEC 0: failed to correct: -74
...
This problem is present in all kernels since the FEC code's
introduction (kernel 4.5).
It is thought that this problem is not visible in Android ecosystem
because it always uses a default RS roots=2.
Depends-on: a14e5ec66a7a ("dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size")
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Tested-by: Jérôme Carretero <cJ-ko@zougloub.eu>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Cc: stable@vger.kernel.org # 4.5+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
dm_bufio_get_device_size returns the device size in blocks. Before
returning the value, we must subtract the nubmer of starting
sectors. The number of starting sectors may not be divisible by block
size.
Note that currently, no target is using dm_bufio_set_sector_offset and
dm_bufio_get_device_size simultaneously, so this change has no effect.
However, an upcoming dm-verity-fec fix needs this change.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Milan Broz <gmazyland@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
We migrate zone unusable bytes to read-only bytes when a block group is
set to read-only, and account all the free region as bytes_readonly.
Thus, we should not increase block_group->zone_unusable when the block
group is read-only.
Fixes: 169e0da91a21 ("btrfs: zoned: track unusable bytes for zones")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We need to use sector_t for zone_sectors, or it would set the zone size
to zero when the size >= 4GB (= 2^24 sectors) by shifting the
zone_sectors value by SECTOR_SHIFT. We're assuming zones sizes up to
8GiB.
Fixes: 5b316468983d ("btrfs: get zone information of zoned block devices")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the declaration of the struct trace_event_call, the flags has the bits
defined in the comment above it. But these bits are also defined by the
TRACE_EVENT_FL_* enums just above the declaration of the struct. As the
comment about the flags in the struct has become stale and incorrect, just
replace it with a reference to the TRACE_EVENT_FL_* enum above.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If tracing is disabled for some reason (traceoff_on_warning, command line,
etc), the ftrace selftests are guaranteed to fail, as their results are
defined by trace data in the ring buffers. If the ring buffers are turned
off, the tests will fail, due to lack of data.
Because tracing being disabled is for a specific reason (warning, user
decided to, etc), it does not make sense to enable tracing to run the self
tests, as the test output may corrupt the reason for the tracing to be
disabled.
Instead, simply skip the self tests and report that they are being skipped
due to tracing being disabled.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
kmemleak report:
unreferenced object 0xc5a6f708 (size 8):
comm "ftracetest", pid 1209, jiffies 4294911500 (age 6.816s)
hex dump (first 8 bytes):
00 c1 3d 60 14 83 1f 8a ..=`....
backtrace:
[<f0aa4ac4>] __kmalloc_track_caller+0x2a6/0x460
[<7d3d60a6>] kstrndup+0x37/0x70
[<45a0e739>] argv_split+0x1c/0x120
[<c17982f8>] __create_synth_event+0x192/0xb00
[<0708b8a3>] create_synth_event+0xbb/0x150
[<3d1941e1>] create_dyn_event+0x5c/0xb0
[<5cf8b9e3>] trace_parse_run_command+0xa7/0x140
[<04deb2ef>] dyn_event_write+0x10/0x20
[<8779ac95>] vfs_write+0xa9/0x3c0
[<ed93722a>] ksys_write+0x89/0xc0
[<b9ca0507>] __ia32_sys_write+0x15/0x20
[<7ce02d85>] __do_fast_syscall_32+0x45/0x80
[<cb0ecb35>] do_fast_syscall_32+0x29/0x60
[<2467454a>] do_SYSENTER_32+0x15/0x20
[<9beaa61d>] entry_SYSENTER_32+0xa9/0xfc
unreferenced object 0xc5a6f078 (size 8):
comm "ftracetest", pid 1209, jiffies 4294911500 (age 6.816s)
hex dump (first 8 bytes):
08 f7 a6 c5 00 00 00 00 ........
backtrace:
[<bbac096a>] __kmalloc+0x2b6/0x470
[<aa2624b4>] argv_split+0x82/0x120
[<c17982f8>] __create_synth_event+0x192/0xb00
[<0708b8a3>] create_synth_event+0xbb/0x150
[<3d1941e1>] create_dyn_event+0x5c/0xb0
[<5cf8b9e3>] trace_parse_run_command+0xa7/0x140
[<04deb2ef>] dyn_event_write+0x10/0x20
[<8779ac95>] vfs_write+0xa9/0x3c0
[<ed93722a>] ksys_write+0x89/0xc0
[<b9ca0507>] __ia32_sys_write+0x15/0x20
[<7ce02d85>] __do_fast_syscall_32+0x45/0x80
[<cb0ecb35>] do_fast_syscall_32+0x29/0x60
[<2467454a>] do_SYSENTER_32+0x15/0x20
[<9beaa61d>] entry_SYSENTER_32+0xa9/0xfc
In __create_synth_event(), while iterating field/type arguments, the
argv_split() will return array of atleast 2 elements even when zero
arguments(argc=0) are passed. for e.g. when there is double delimiter
or string ends with delimiter
To fix call argv_free() even when argc=0.
Link: https://lkml.kernel.org/r/20210304094521.GA1826@cosmos
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
When the CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is enabled, and the time
stamps are detected as not being valid, it reports information about the
write stamp, but does not show the before_stamp which is still useful
information. Also, it should give a warning once, such that tests detect
this happening.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Part of the logic of the new time stamp code depends on the before_stamp and
the write_stamp to be different if the write_stamp does not match the last
event on the buffer, as it will be used to calculate the delta of the next
event written on the buffer.
The discard logic depends on this, as the next event to come in needs to
inject a full timestamp as it can not rely on the last event timestamp in
the buffer because it is unknown due to events after it being discarded. But
by changing the write_stamp back to the time before it, it forces the next
event to use a full time stamp, instead of relying on it.
The issue came when a full time stamp was used for the event, and
rb_time_delta() returns zero in that case. The update to the write_stamp
(which subtracts delta) made it not change. Then when the event is removed
from the buffer, because the before_stamp and write_stamp still match, the
next event written would calculate its delta from the write_stamp, but that
would be wrong as the write_stamp is of the time of the event that was
discarded.
In the case that the delta change being made to write_stamp is zero, set the
before_stamp to zero as well, and this will force the next event to inject a
full timestamp and not use the current write_stamp.
Cc: stable@vger.kernel.org
Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
It's "cond_resched()" not "cond_sched()".
Link: https://lkml.kernel.org/r/1863065.aFVDpXsuPd@devpool47
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
A declaration of function "int trace_empty(struct trace_iterator *iter)"
shows up twice in the header file kernel/trace/trace.h
Link: https://lkml.kernel.org/r/20210304092348.208033-1-y.karadz@gmail.com
Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If we race on shutting down the io-wq, then we should ensure that any
work that was queued after workers shutdown is canceled. Harden the
add work check a bit too, checking for IO_WQ_BIT_EXIT and cancel if
it's set.
Add a WARN_ON() for having any work before we kill the io-wq context.
Reported-by: syzbot+91b4b56ead187d35c9d3@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Alex reports that his system fails to suspend using 5.12-rc1, with the
following dump:
[ 240.650300] PM: suspend entry (deep)
[ 240.650748] Filesystems sync: 0.000 seconds
[ 240.725605] Freezing user space processes ...
[ 260.739483] Freezing of tasks failed after 20.013 seconds (3 tasks refusing to freeze, wq_busy=0):
[ 260.739497] task:iou-mgr-446 state:S stack: 0 pid: 516 ppid: 439 flags:0x00004224
[ 260.739504] Call Trace:
[ 260.739507] ? sysvec_apic_timer_interrupt+0xb/0x81
[ 260.739515] ? pick_next_task_fair+0x197/0x1cde
[ 260.739519] ? sysvec_reschedule_ipi+0x2f/0x6a
[ 260.739522] ? asm_sysvec_reschedule_ipi+0x12/0x20
[ 260.739525] ? __schedule+0x57/0x6d6
[ 260.739529] ? del_timer_sync+0xb9/0x115
[ 260.739533] ? schedule+0x63/0xd5
[ 260.739536] ? schedule_timeout+0x219/0x356
[ 260.739540] ? __next_timer_interrupt+0xf1/0xf1
[ 260.739544] ? io_wq_manager+0x73/0xb1
[ 260.739549] ? io_wq_create+0x262/0x262
[ 260.739553] ? ret_from_fork+0x22/0x30
[ 260.739557] task:iou-mgr-517 state:S stack: 0 pid: 522 ppid: 439 flags:0x00004224
[ 260.739561] Call Trace:
[ 260.739563] ? sysvec_apic_timer_interrupt+0xb/0x81
[ 260.739566] ? pick_next_task_fair+0x16f/0x1cde
[ 260.739569] ? sysvec_apic_timer_interrupt+0xb/0x81
[ 260.739571] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 260.739574] ? __schedule+0x5b7/0x6d6
[ 260.739578] ? del_timer_sync+0x70/0x115
[ 260.739581] ? schedule_timeout+0x211/0x356
[ 260.739585] ? __next_timer_interrupt+0xf1/0xf1
[ 260.739588] ? io_wq_check_workers+0x15/0x11f
[ 260.739592] ? io_wq_manager+0x69/0xb1
[ 260.739596] ? io_wq_create+0x262/0x262
[ 260.739600] ? ret_from_fork+0x22/0x30
[ 260.739603] task:iou-wrk-517 state:S stack: 0 pid: 523 ppid: 439 flags:0x00004224
[ 260.739607] Call Trace:
[ 260.739609] ? __schedule+0x5b7/0x6d6
[ 260.739614] ? schedule+0x63/0xd5
[ 260.739617] ? schedule_timeout+0x219/0x356
[ 260.739621] ? __next_timer_interrupt+0xf1/0xf1
[ 260.739624] ? task_thread.isra.0+0x148/0x3af
[ 260.739628] ? task_thread_unbound+0xa/0xa
[ 260.739632] ? task_thread_bound+0x7/0x7
[ 260.739636] ? ret_from_fork+0x22/0x30
[ 260.739647] OOM killer enabled.
[ 260.739648] Restarting tasks ... done.
[ 260.740077] PM: suspend exit
Play nice and ensure that any thread we create will call try_to_freeze()
at an opportune time so that memory suspend can proceed. For the io-wq
worker threads, mark them as PF_NOFREEZE. They could potentially be
blocked for a long time.
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_dismantle_req() is always followed by io_put_task(), which already do
proper in_idle wake ups, so we can skip waking the owner task in
io_dismantle_req(). The rules are simpler now, do io_put_task() shortly
after ending a request, and it will be fine.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__io_queue_async_work() is only called from io_queue_async_work(),
inline it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Inline io_req_clean_work(), less code and easier to analyse
tctx dependencies and refs usage.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When we cancel SQPOLL, @task in io_uring_try_cancel_requests() will
differ from current. Use the right tctx from passed in @task, and don't
forget that it can be NULL when the io_uring ctx exits.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We no longer revert the iovec on -EIOCBQUEUED, see commit ab2125df921d,
and this started causing issues for IOPOLL on devies that run out of
request slots. Turns out what outside of needing a revert for those, we
also had a bug where we didn't properly setup retry inside the submission
path. That could cause re-import of the iovec, if any, and that could lead
to spurious results if the application had those allocated on the stack.
Catch -EAGAIN retry and make the iovec stable for IOPOLL, just like we do
for !IOPOLL retries.
Cc: <stable@vger.kernel.org> # 5.9+
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reported-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The 'err' path should include the hash put, we already grabbed a reference
once we get that far.
Fixes: e941894eae31 ("io-wq: make buffered file write hashed work map per-ctx")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now, sqo_task is used only for a warning that is not interesting anymore
since sqo_dead is gone, remove all of that including ctx->sqo_task.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
Paul Moore
Olga Kornievskaia
Xiong Zhenwu
Lakshmi Ramasubramanian
Vivek Goyal
Linus Torvalds
Bob Pearson
Pavel Begunkov
Jens Axboe
Max Gurtovoy
Martin George
Daniel Wagner
Pascal Terjan
Zoltán Böszörményi
Julian Einwag
Chris Leech
Lee Duncan
Milan Broz
Mikulas Patocka
Naohiro Aota
Steven Rostedt (VMware)
Vamshi K Sthambamkadi
Rolf Eike Beer
Yordan Karadzhov (VMware)