| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add the following Telit FN990 composition:
0x1070: tty, adb, rmnet, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20211210095722.22269-1-dnlplm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KMSAN reported a kernel-infoleak [1], that can exploited
by unpriv users.
After analysis it turned out UDP was not initializing
r->idiag_expires. Other users of inet_sk_diag_fill()
might make the same mistake in the future, so fix this
in inet_sk_diag_fill().
[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:156 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
copyout lib/iov_iter.c:156 [inline]
_copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670
copy_to_iter include/linux/uio.h:155 [inline]
simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
__skb_datagram_iter+0x2cb/0x1280 net/core/datagram.c:425
skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
skb_copy_datagram_msg include/linux/skbuff.h:3657 [inline]
netlink_recvmsg+0x660/0x1c60 net/netlink/af_netlink.c:1974
sock_recvmsg_nosec net/socket.c:944 [inline]
sock_recvmsg net/socket.c:962 [inline]
sock_read_iter+0x5a9/0x630 net/socket.c:1035
call_read_iter include/linux/fs.h:2156 [inline]
new_sync_read fs/read_write.c:400 [inline]
vfs_read+0x1631/0x1980 fs/read_write.c:481
ksys_read+0x28c/0x520 fs/read_write.c:619
__do_sys_read fs/read_write.c:629 [inline]
__se_sys_read fs/read_write.c:627 [inline]
__x64_sys_read+0xdb/0x120 fs/read_write.c:627
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
netlink_dump+0x3d5/0x16a0 net/netlink/af_netlink.c:2245
__netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370
netlink_dump_start include/linux/netlink.h:254 [inline]
inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1343
sock_diag_rcv_msg+0x24a/0x620
netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:276
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
sock_write_iter+0x594/0x690 net/socket.c:1057
do_iter_readv_writev+0xa7f/0xc70
do_iter_write+0x52c/0x1500 fs/read_write.c:851
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x63f/0xe30 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Bytes 68-71 of 312 are uninitialized
Memory access of size 312 starts at ffff88812ab54000
Data copied to user address 0000000020001440
CPU: 1 PID: 6365 Comm: syz-executor801 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 3c4d05c80567 ("inet_diag: Introduce the inet socket dumping routine")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20211209185058.53917-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sock_hold(sk) is invoked in pep_sock_accept(), but __sock_put(sk) is not
invoked in subsequent failure branches(pep_accept_conn() != 0).
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20211209082839.33985-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qdiscs are not supposed to call their own destroy() method
from init(), because core stack already does that.
syzbot was able to trigger use after free:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock_common kernel/locking/mutex.c:586 [inline]
WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740
Modules linked in:
CPU: 0 PID: 21902 Comm: syz-executor189 Not tainted 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__mutex_lock_common kernel/locking/mutex.c:586 [inline]
RIP: 0010:__mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740
Code: 08 84 d2 0f 85 19 08 00 00 8b 05 97 38 4b 04 85 c0 0f 85 27 f7 ff ff 48 c7 c6 20 00 ac 89 48 c7 c7 a0 fe ab 89 e8 bf 76 ba ff <0f> 0b e9 0d f7 ff ff 48 8b 44 24 40 48 8d b8 c8 08 00 00 48 89 f8
RSP: 0018:ffffc9000627f290 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88802315d700 RSI: ffffffff815f1db8 RDI: fffff52000c4fe44
RBP: ffff88818f28e000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815ebb5e R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: ffffc9000627f458 R15: 0000000093c30000
FS: 0000555556abc400(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fda689c3303 CR3: 000000001cfbb000 CR4: 0000000000350ef0
Call Trace:
<TASK>
tcf_chain0_head_change_cb_del+0x2e/0x3d0 net/sched/cls_api.c:810
tcf_block_put_ext net/sched/cls_api.c:1381 [inline]
tcf_block_put_ext net/sched/cls_api.c:1376 [inline]
tcf_block_put+0xbc/0x130 net/sched/cls_api.c:1394
cake_destroy+0x3f/0x80 net/sched/sch_cake.c:2695
qdisc_create.constprop.0+0x9da/0x10f0 net/sched/sch_api.c:1293
tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660
rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x904/0xdf0 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
___sys_sendmsg+0xf3/0x170 net/socket.c:2463
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f1bb06badb9
Code: Unable to access opcode bytes at RIP 0x7f1bb06bad8f.
RSP: 002b:00007fff3012a658 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1bb06badb9
RDX: 0000000000000000 RSI: 00000000200007c0 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000003
R10: 0000000000000003 R11: 0000000000000246 R12: 00007fff3012a688
R13: 00007fff3012a6a0 R14: 00007fff3012a6e0 R15: 00000000000013c2
</TASK>
Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://lore.kernel.org/r/20211210142046.698336-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
./fcnal-test.sh -v -t ipv6_ping
TEST: ping out, VRF bind - ns-B IPv6 LLA [FAIL]
TEST: ping out, VRF bind - multicast IP [FAIL]
ping6 is failing as it should.
COMMAND: ip netns exec ns-A /bin/ping6 -c1 -w1 fe80::7c4c:bcff:fe66:a63a%red
strace of ping6 shows it is failing with '1',
so change the expected rc from 2 to 1.
Fixes: c0644e71df33 ("selftests: Add ipv6 ping tests to fcnal-test")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jie2x Zhou <jie2x.zhou@intel.com>
Link: https://lore.kernel.org/r/20211209020230.37270-1-jie2x.zhou@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up remaining headers that are specific to liblockdep but lived in
the shared header directory. These are all unused after the liblockdep
code was removed in commit 7246f4dcaccc ("tools/lib/lockdep: drop
liblockdep").
Note that there are still headers that were originally created for
liblockdep, that still have liblockdep references, but they are used by
other tools/ code at this point.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Martyn Welch reports that his CPU port is unable to link where it has
been necessary to use one of the switch ports with an internal PHY for
the CPU port. The reason behind this is the port control register is
left forcing the link down, preventing traffic flow.
This occurs because during initialisation, phylink expects the link to
be down, and DSA forces the link down by synthesising a call to the
DSA drivers phylink_mac_link_down() method, but we don't touch the
forced-link state when we later reconfigure the port.
Resolve this by also unforcing the link state when we are operating in
PHY mode and the PPU is set to poll the PHY to retrieve link status
information.
Reported-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Fixes: 3be98b2d5fbc ("net: dsa: Down cpu/dsa ports phylink will control")
Cc: <stable@vger.kernel.org> # 5.7: 2b29cb9e3f7f: net: dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's"
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1mvFhP-00F8Zb-Ul@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ev_cdev_write_pending flag is preventing a TX message post for
AT port while MBIM transfer is ongoing.
Removed the unnecessary check around control port TX transfer.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Devlink initialization flow was overwriting the IP traffic
channel configuration. This was causing wwan0 network interface
to be unusable after fw flash.
When device boots to fully functional mode restore the IP channel
configuration.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In TX packet accumulation flow transport layer is
giving a doorbell to device even though there is
no pending control TX transfer that needs immediate
attention.
Introduced a new hpda_ctrl_pending variable to keep
track of pending control TX transfer. If there is a
pending control TX transfer which needs an immediate
attention only then give a doorbell to device.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoid a memory leak if there is not a CPU port defined.
Fixes: 8d5f7954b7c8 ("net: dsa: felix: break at first CPU port during init and teardown")
Addresses-Coverity-ID: 1492897 ("Resource leak")
Addresses-Coverity-ID: 1492899 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211209110538.11585-1-jose.exposito89@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I won't have access to the relevant HW and docs much longer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Link: https://lore.kernel.org/r/20211209153546.1152921-1-jwi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For some reason, fq_pie_destroy() did not copy
working code from pie_destroy() and other qdiscs,
thus causing elusive bug.
Before calling del_timer_sync(&q->adapt_timer),
we need to ensure timer will not rearm itself.
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 0-....: (4416 ticks this GP) idle=60d/1/0x4000000000000000 softirq=10433/10434 fqs=2579
(t=10501 jiffies g=13085 q=3989)
NMI backtrace for cpu 0
CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111
nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62
trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343
print_cpu_stall kernel/rcu/tree_stall.h:627 [inline]
check_cpu_stall kernel/rcu/tree_stall.h:711 [inline]
rcu_pending kernel/rcu/tree.c:3878 [inline]
rcu_sched_clock_irq.cold+0x9d/0x746 kernel/rcu/tree.c:2597
update_process_times+0x16d/0x200 kernel/time/timer.c:1785
tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226
tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428
__run_hrtimer kernel/time/hrtimer.c:1685 [inline]
__hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749
hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline]
__sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103
sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638
RIP: 0010:write_comp_data kernel/kcov.c:221 [inline]
RIP: 0010:__sanitizer_cov_trace_const_cmp1+0x1d/0x80 kernel/kcov.c:273
Code: 54 c8 20 48 89 10 c3 66 0f 1f 44 00 00 53 41 89 fb 41 89 f1 bf 03 00 00 00 65 48 8b 0c 25 40 70 02 00 48 89 ce 4c 8b 54 24 08 <e8> 4e f7 ff ff 84 c0 74 51 48 8b 81 88 15 00 00 44 8b 81 84 15 00
RSP: 0018:ffffc90000d27b28 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff888064bf1bf0 RCX: ffff888011928000
RDX: ffff888011928000 RSI: ffff888011928000 RDI: 0000000000000003
RBP: ffff888064bf1c28 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff875d8295 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8880783dd300 R14: 0000000000000000 R15: 0000000000000000
pie_calculate_probability+0x405/0x7c0 net/sched/sch_pie.c:418
fq_pie_timer+0x170/0x2a0 net/sched/sch_fq_pie.c:383
call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421
expire_timers kernel/time/timer.c:1466 [inline]
__run_timers.part.0+0x675/0xa20 kernel/time/timer.c:1734
__run_timers kernel/time/timer.c:1715 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747
__do_softirq+0x29b/0x9c2 kernel/softirq.c:558
run_ksoftirqd kernel/softirq.c:921 [inline]
run_ksoftirqd+0x2d/0x60 kernel/softirq.c:913
smpboot_thread_fn+0x645/0x9c0 kernel/smpboot.c:164
kthread+0x405/0x4f0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Mohit P. Tahiliani <tahiliani@nitk.edu.in>
Cc: Sachin D. Patil <sdp.sachin@gmail.com>
Cc: V. Saicharan <vsaicharan1998@gmail.com>
Cc: Mohit Bhasi <mohitbhasi1998@gmail.com>
Cc: Leslie Monis <lesliemonis@gmail.com>
Cc: Gautam Ramakrishnan <gautamramk@gmail.com>
Link: https://lore.kernel.org/r/20211209084937.3500020-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If allocating the DMA buffer fails, mana_hwc_destroy_wq was called
without previously storing the pointer to the queue.
In order to avoid leaking the pointer to the queue, store it as soon as
it is allocated.
Addresses-Coverity-ID: 1484720 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/20211208223723.18520-1-jose.exposito89@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When an IPv4 packet is received, the ip_rcv_core(...) sets the receiving
interface index into the IPv4 socket control block (v5.16-rc4,
net/ipv4/ip_input.c line 510):
IPCB(skb)->iif = skb->skb_iif;
If that IPv4 packet is meant to be encapsulated in an outer IPv6+SRH
header, the seg6_do_srh_encap(...) performs the required encapsulation.
In this case, the seg6_do_srh_encap function clears the IPv6 socket control
block (v5.16-rc4 net/ipv6/seg6_iptunnel.c line 163):
memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));
The memset(...) was introduced in commit ef489749aae5 ("ipv6: sr: clear
IP6CB(skb) on SRH ip4ip6 encapsulation") a long time ago (2019-01-29).
Since the IPv6 socket control block and the IPv4 socket control block share
the same memory area (skb->cb), the receiving interface index info is lost
(IP6CB(skb)->iif is set to zero).
As a side effect, that condition triggers a NULL pointer dereference if
commit 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig
netdev") is applied.
To fix that issue, we set the IP6CB(skb)->iif with the index of the
receiving interface once again.
Fixes: ef489749aae5 ("ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211208195409.12169-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a
CPP area structure. But in line 807 (#2), when the cache is allocated
failed, this CPP area structure is not freed, which will result in
memory leak.
We can fix it by freeing the CPP area when the cache is allocated
failed (#2).
792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size)
793 {
794 struct nfp_cpp_area_cache *cache;
795 struct nfp_cpp_area *area;
800 area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0),
801 0, size);
// #1: allocates and initializes
802 if (!area)
803 return -ENOMEM;
805 cache = kzalloc(sizeof(*cache), GFP_KERNEL);
806 if (!cache)
807 return -ENOMEM; // #2: missing free
817 return 0;
818 }
Fixes: 4cb584e0ee7d ("nfp: add CPP access core")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20211209061511.122535-1-niejianglei2021@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The done() netlink callback nfc_genl_dump_ses_done() should check if
received argument is non-NULL, because its allocation could fail earlier
in dumpit() (nfc_genl_dump_ses()).
Fixes: ac22ac466a65 ("NFC: Add a GET_SE netlink API")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211209081307.57337-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When kmalloc in nfc_genl_dump_devices() fails then
nfc_genl_dump_devices_done() segfaults as below
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 25 Comm: kworker/0:1 Not tainted 5.16.0-rc4-01180-g2a987e65025e-dirty #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-6.fc35 04/01/2014
Workqueue: events netlink_sock_destruct_work
RIP: 0010:klist_iter_exit+0x26/0x80
Call Trace:
<TASK>
class_dev_iter_exit+0x15/0x20
nfc_genl_dump_devices_done+0x3b/0x50
genl_lock_done+0x84/0xd0
netlink_sock_destruct+0x8f/0x270
__sk_destruct+0x64/0x3b0
sk_destruct+0xa8/0xd0
__sk_free+0x2e8/0x3d0
sk_free+0x51/0x90
netlink_sock_destruct_work+0x1c/0x20
process_one_work+0x411/0x710
worker_thread+0x6fd/0xa80
Link: https://syzkaller.appspot.com/bug?id=fc0fa5a53db9edd261d56e74325419faf18bd0df
Reported-by: syzbot+f9f76f4a0766420b4a02@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211208182742.340542-1-tadeusz.struk@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The max number of UDP gso segments is intended to cap to UDP_MAX_SEGMENTS,
this is checked in udp_send_skb():
if (skb->len > cork->gso_size * UDP_MAX_SEGMENTS) {
kfree_skb(skb);
return -EINVAL;
}
skb->len contains network and transport header len here, we should use
only data len instead.
Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/900742e5-81fb-30dc-6e0b-375c6cdd7982@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Added default case to handle undefined cmode scenario in
mv88e6393x_serdes_power() and mv88e6393x_serdes_power() methods.
Addresses-Coverity: 1494644 ("Uninitialized scalar variable")
Fixes: 21635d9203e1c (net: dsa: mv88e6xxx: Fix application of erratum 4.8 for 88E6393X)
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Link: https://lore.kernel.org/r/20211209041552.9810-1-amhamza.mgc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The CAN clock frequency is used when calculating the CAN bittiming
parameters. When wrong clock frequency is used, the device may end up
with wrong bittiming parameters, depending on user requested bittiming
parameters.
To avoid this, get the CAN clock frequency from the device. Various
existing Kvaser Leaf products use different CAN clocks.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Link: https://lore.kernel.org/all/20211208152122.250852-2-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Check the direction bit in the error frame packet (EPACK) to determine
which net_device_stats {rx,tx}_errors counter to increase.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Link: https://lore.kernel.org/all/20211208152122.250852-1-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The registration of XDP queue information is incorrect because the
RX queue id we use is invalid. When port->id == 0 it appears to works
as expected yet it's no longer the case when port->id != 0.
The problem arised while using a recent kernel version on the
MACCHIATOBin. This board has several ports:
* eth0 and eth1 are 10Gbps interfaces ; both ports has port->id == 0;
* eth2 is a 1Gbps interface with port->id != 0.
Code from xdp-tutorial (more specifically advanced03-AF_XDP) was used
to test packet capture and injection on all these interfaces. The XDP
kernel was simplified to:
SEC("xdp_sock")
int xdp_sock_prog(struct xdp_md *ctx)
{
int index = ctx->rx_queue_index;
/* A set entry here means that the correspnding queue_id
* has an active AF_XDP socket bound to it. */
if (bpf_map_lookup_elem(&xsks_map, &index))
return bpf_redirect_map(&xsks_map, index, 0);
return XDP_PASS;
}
Starting the program using:
./af_xdp_user -d DEV
Gives the following result:
* eth0 : ok
* eth1 : ok
* eth2 : no capture, no injection
Investigating the issue shows that XDP rx queues for eth2 are wrong:
XDP expects their id to be in the range [0..3] but we found them to be
in the range [32..35].
Trying to force rx queue ids using:
./af_xdp_user -d eth2 -Q 32
fails as expected (we shall not have more than 4 queues).
When we register the XDP rx queue information (using
xdp_rxq_info_reg() in function mvpp2_rxq_init()) we tell it to use
rxq->id as the queue id. This value is computed as:
rxq->id = port->id * max_rxq_count + queue_id
where max_rxq_count depends on the device version. In the MACCHIATOBin
case, this value is 32, meaning that rx queues on eth2 are numbered
from 32 to 35 - there are four of them.
Clearly, this is not the per-port queue id that XDP is expecting:
it wants a value in the range [0..3]. It shall directly use queue_id
which is stored in rxq->logic_rxq -- so let's use that value instead.
rxq->id is left untouched ; its value is indeed valid but it should
not be used in this context.
This is consistent with the remaining part of the code in
mvpp2_rxq_init().
With this change, packet capture is working as expected on all the
MACCHIATOBin ports.
Fixes: b27db2274ba8 ("mvpp2: use page_pool allocator")
Signed-off-by: Louis Amas <louis.amas@eho.link>
Signed-off-by: Emmanuel Deloget <emmanuel.deloget@eho.link>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/20211207143423.916334-1-louis.amas@eho.link
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'Commit 39f9895a00f4 ("vmxnet3: add support for 32 Tx/Rx queues")'
added support for 32Tx/Rx queues. Within that patch, value of
VMXNET3_LINUX_MIN_MSIX_VECT was updated.
However, there is a case (numvcpus = 2) which actually requires 3
intrs which matches VMXNET3_LINUX_MIN_MSIX_VECT which then is
treated as failure by stack to allocate more vectors. This patch
fixes this issue.
Fixes: 39f9895a00f4 ("vmxnet3: add support for 32 Tx/Rx queues")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Link: https://lore.kernel.org/r/20211207081737.14000-1-doshir@vmware.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 2c611ad97a82 ("net, neigh: Extend neigh->flags to 32 bit
to allow for extensions") enables a new KMSAM warning [1]
I think the bug is actually older, because the following intruction
only occurred if ndm->ndm_flags had NTF_PROXY set.
pn->flags = ndm->ndm_flags;
Let's clear all pneigh_entry fields at alloc time.
[1]
BUG: KMSAN: uninit-value in pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593
pneigh_fill_info+0x986/0xb30 net/core/neighbour.c:2593
pneigh_dump_table net/core/neighbour.c:2715 [inline]
neigh_dump_info+0x1e3f/0x2c60 net/core/neighbour.c:2832
netlink_dump+0xaca/0x16a0 net/netlink/af_netlink.c:2265
__netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370
netlink_dump_start include/linux/netlink.h:254 [inline]
rtnetlink_rcv_msg+0x181b/0x18c0 net/core/rtnetlink.c:5534
netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5589
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
sock_write_iter+0x594/0x690 net/socket.c:1057
call_write_iter include/linux/fs.h:2162 [inline]
new_sync_write fs/read_write.c:503 [inline]
vfs_write+0x1318/0x2030 fs/read_write.c:590
ksys_write+0x28c/0x520 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0xdb/0x120 fs/read_write.c:652
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
slab_alloc mm/slub.c:3259 [inline]
__kmalloc+0xc3c/0x12d0 mm/slub.c:4437
kmalloc include/linux/slab.h:595 [inline]
pneigh_lookup+0x60f/0xd70 net/core/neighbour.c:766
arp_req_set_public net/ipv4/arp.c:1016 [inline]
arp_req_set+0x430/0x10a0 net/ipv4/arp.c:1032
arp_ioctl+0x8d4/0xb60 net/ipv4/arp.c:1232
inet_ioctl+0x4ef/0x820 net/ipv4/af_inet.c:947
sock_do_ioctl net/socket.c:1118 [inline]
sock_ioctl+0xa3f/0x13e0 net/socket.c:1235
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl+0x2df/0x4a0 fs/ioctl.c:860
__x64_sys_ioctl+0xd8/0x110 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
CPU: 1 PID: 20001 Comm: syz-executor.0 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 62dd93181aaa ("[IPV6] NDISC: Set per-entry is_router flag in Proxy NA.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211206165329.1049835-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit fixes a misunderstanding in commit 4a3e0aeddf09 ("net: dsa:
mv88e6xxx: don't use PHY_DETECT on internal PHY's").
For Marvell DSA switches with the PHY_DETECT bit (for non-6250 family
devices), controls whether the PPU polls the PHY to retrieve the link,
speed, duplex and pause status to update the port configuration. This
applies for both internal and external PHYs.
For some switches such as 88E6352 and 88E6390X, PHY_DETECT has an
additional function of enabling auto-media mode between the internal
PHY and SERDES blocks depending on which first gains link.
The original intention of commit 5d5b231da7ac (net: dsa: mv88e6xxx: use
PHY_DETECT in mac_link_up/mac_link_down) was to allow this bit to be
used to detect when this propagation is enabled, and allow software to
update the port configuration. This has found to be necessary for some
switches which do not automatically propagate status from the SERDES to
the port, which includes the 88E6390. However, commit 4a3e0aeddf09
("net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's") breaks
this assumption.
Maarten Zanders has confirmed that the issue he was addressing was for
an 88E6250 switch, which does not have a PHY_DETECT bit in bit 12, but
instead a link status bit. Therefore, mv88e6xxx_port_ppu_updates() does
not report correctly.
This patch resolves the above issues by reverting Maarten's change and
instead making mv88e6xxx_port_ppu_updates() indicate whether the port
is internal for the 88E6250 family of switches.
Yes, you're right, I'm targeting the 6250 family. And yes, your
suggestion would solve my case and is a better implementation for
the other devices (as far as I can see).
Fixes: 4a3e0aeddf09 ("net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/E1muXm7-00EwJB-7n@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver was zeroing live stats that could be fetched by
ndo_get_stats64 at any time. This could result in inconsistent
statistics, and the telltale sign was when reading stats frequently from
/proc/net/dev, the stats would go backwards.
Fix by collecting stats into a local, and delaying when we write to the
structure so it's not incremental.
Fixes: fcea6f3da546 ("ice: Add stats and ethtool support")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Battery status is reported for the Asus UX550VE touchscreen even though
it does not have a battery. Prevent it from always reporting the
battery as low.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1897823
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This commit adds BPF verifier selftests that cover all corner cases by
packet boundary checks. Specifically, 8-byte packet reads are tested at
the beginning of data and at the beginning of data_meta, using all kinds
of boundary checks (all comparison operators: <, >, <=, >=; both
permutations of operands: data + length compared to end, end compared to
data + length). For each case there are three tests:
1. Length is just enough for an 8-byte read. Length is either 7 or 8,
depending on the comparison.
2. Length is increased by 1 - should still pass the verifier. These
cases are useful, because they failed before commit 2fa7d94afc1a
("bpf: Fix the off-by-two error in range markings").
3. Length is decreased by 1 - should be rejected by the verifier.
Some existing tests are just renamed to avoid duplication.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211207081521.41923-1-maximmi@nvidia.com
|
|
Background:
We have a customer is running a Profinet stack on the 8MM which receives and
responds PNIO packets every 4ms and PNIO-CM packets every 40ms. However, from
time to time the received PNIO-CM package is "stock" and is only handled when
receiving a new PNIO-CM or DCERPC-Ping packet (tcpdump shows the PNIO-CM and
the DCERPC-Ping packet at the same time but the PNIO-CM HW timestamp is from
the expected 40 ms and not the 2s delay of the DCERPC-Ping).
After debugging, we noticed PNIO, PNIO-CM and DCERPC-Ping packets would
be handled by different RX queues.
The root cause should be driver ack all queues' interrupt when handle a
specific queue in fec_enet_rx_queue(). The blamed patch is introduced to
receive as much packets as possible once to avoid interrupt flooding.
But it's unreasonable to clear other queues'interrupt when handling one
queue, this patch tries to fix it.
Fixes: ed63f1dcd578 (net: fec: clear receive interrupts before processing a packet)
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Reported-by: Nicolas Diaz <nicolas.diaz@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20211206135457.15946-1-qiangqing.zhang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix warning as:
Documentation/networking/kapi:147: ./drivers/net/phy/phylink.c:1657: WARNING: Unexpected indentation.
Documentation/networking/kapi:147: ./drivers/net/phy/phylink.c:1658: WARNING: Block quote ends without a blank line; unexpected unindent.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix warning as:
linux-next/Documentation/networking/kapi:122: ./include/linux/phy.h:543: WARNING: Unexpected indentation.
linux-next/Documentation/networking/kapi:122: ./include/linux/phy.h:544: WARNING: Block quote ends without a blank line; unexpected unindent.
linux-next/Documentation/networking/kapi:122: ./include/linux/phy.h:546: WARNING: Unexpected indentation.
Suggested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoid passing NULL skb to __skb_put() function call if
napi_alloc_skb() returns NULL.
Fixes: 37149e9374bf ("gve: Implement packet continuation for RX.")
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Link: https://lore.kernel.org/r/20211205183810.8299-1-amhamza.mgc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jiri has moved on and will not carry out the mlxsw maintainership duty any
longer. Add myself as a co-maintainer instead.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/45b54312cdebaf65c5d110b15a5dd2df795bf2be.1638807297.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests for TLSv1.2 and TLSv1.3 with AES256-GCM cipher
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests for TLSv1.2 and TLSv1.3 with AES-CCM cipher.
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
(struct nf_conn)->timeout can be read/written locklessly,
add READ_ONCE()/WRITE_ONCE() to prevent load/store tearing.
BUG: KCSAN: data-race in __nf_conntrack_alloc / __nf_conntrack_find_get
write to 0xffff888132e78c08 of 4 bytes by task 6029 on cpu 0:
__nf_conntrack_alloc+0x158/0x280 net/netfilter/nf_conntrack_core.c:1563
init_conntrack+0x1da/0xb30 net/netfilter/nf_conntrack_core.c:1635
resolve_normal_ct+0x502/0x610 net/netfilter/nf_conntrack_core.c:1746
nf_conntrack_in+0x1c5/0x88f net/netfilter/nf_conntrack_core.c:1901
ipv6_conntrack_local+0x19/0x20 net/netfilter/nf_conntrack_proto.c:414
nf_hook_entry_hookfn include/linux/netfilter.h:142 [inline]
nf_hook_slow+0x72/0x170 net/netfilter/core.c:619
nf_hook include/linux/netfilter.h:262 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
ip6_xmit+0xa3a/0xa60 net/ipv6/ip6_output.c:324
inet6_csk_xmit+0x1a2/0x1e0 net/ipv6/inet6_connection_sock.c:135
__tcp_transmit_skb+0x132a/0x1840 net/ipv4/tcp_output.c:1402
tcp_transmit_skb net/ipv4/tcp_output.c:1420 [inline]
tcp_write_xmit+0x1450/0x4460 net/ipv4/tcp_output.c:2680
__tcp_push_pending_frames+0x68/0x1c0 net/ipv4/tcp_output.c:2864
tcp_push_pending_frames include/net/tcp.h:1897 [inline]
tcp_data_snd_check+0x62/0x2e0 net/ipv4/tcp_input.c:5452
tcp_rcv_established+0x880/0x10e0 net/ipv4/tcp_input.c:5947
tcp_v6_do_rcv+0x36e/0xa50 net/ipv6/tcp_ipv6.c:1521
sk_backlog_rcv include/net/sock.h:1030 [inline]
__release_sock+0xf2/0x270 net/core/sock.c:2768
release_sock+0x40/0x110 net/core/sock.c:3300
sk_stream_wait_memory+0x435/0x700 net/core/stream.c:145
tcp_sendmsg_locked+0xb85/0x25a0 net/ipv4/tcp.c:1402
tcp_sendmsg+0x2c/0x40 net/ipv4/tcp.c:1440
inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:644
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
__sys_sendto+0x21e/0x2c0 net/socket.c:2036
__do_sys_sendto net/socket.c:2048 [inline]
__se_sys_sendto net/socket.c:2044 [inline]
__x64_sys_sendto+0x74/0x90 net/socket.c:2044
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff888132e78c08 of 4 bytes by task 17446 on cpu 1:
nf_ct_is_expired include/net/netfilter/nf_conntrack.h:286 [inline]
____nf_conntrack_find net/netfilter/nf_conntrack_core.c:776 [inline]
__nf_conntrack_find_get+0x1c7/0xac0 net/netfilter/nf_conntrack_core.c:807
resolve_normal_ct+0x273/0x610 net/netfilter/nf_conntrack_core.c:1734
nf_conntrack_in+0x1c5/0x88f net/netfilter/nf_conntrack_core.c:1901
ipv6_conntrack_local+0x19/0x20 net/netfilter/nf_conntrack_proto.c:414
nf_hook_entry_hookfn include/linux/netfilter.h:142 [inline]
nf_hook_slow+0x72/0x170 net/netfilter/core.c:619
nf_hook include/linux/netfilter.h:262 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
ip6_xmit+0xa3a/0xa60 net/ipv6/ip6_output.c:324
inet6_csk_xmit+0x1a2/0x1e0 net/ipv6/inet6_connection_sock.c:135
__tcp_transmit_skb+0x132a/0x1840 net/ipv4/tcp_output.c:1402
__tcp_send_ack+0x1fd/0x300 net/ipv4/tcp_output.c:3956
tcp_send_ack+0x23/0x30 net/ipv4/tcp_output.c:3962
__tcp_ack_snd_check+0x2d8/0x510 net/ipv4/tcp_input.c:5478
tcp_ack_snd_check net/ipv4/tcp_input.c:5523 [inline]
tcp_rcv_established+0x8c2/0x10e0 net/ipv4/tcp_input.c:5948
tcp_v6_do_rcv+0x36e/0xa50 net/ipv6/tcp_ipv6.c:1521
sk_backlog_rcv include/net/sock.h:1030 [inline]
__release_sock+0xf2/0x270 net/core/sock.c:2768
release_sock+0x40/0x110 net/core/sock.c:3300
tcp_sendpage+0x94/0xb0 net/ipv4/tcp.c:1114
inet_sendpage+0x7f/0xc0 net/ipv4/af_inet.c:833
rds_tcp_xmit+0x376/0x5f0 net/rds/tcp_send.c:118
rds_send_xmit+0xbed/0x1500 net/rds/send.c:367
rds_send_worker+0x43/0x200 net/rds/threads.c:200
process_one_work+0x3fc/0x980 kernel/workqueue.c:2298
worker_thread+0x616/0xa70 kernel/workqueue.c:2445
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30
value changed: 0x00027cc2 -> 0x00000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17446 Comm: kworker/u4:5 Tainted: G W 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: krdsd rds_send_worker
Note: I chose an arbitrary commit for the Fixes: tag,
because I do not think we need to backport this fix to very old kernels.
Fixes: e37542ba111f ("netfilter: conntrack: avoid possible false sharing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
centos9 has nmap-ncat which doesn't like the '-q' option, use socat.
While at it, mark test skipped if needed tools are missing.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Break rule evaluation on malformed TCP options.
Fixes: 99d1712bc41c ("netfilter: exthdr: tcp option set support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The existing net,mac test didn't cover the issue recently reported
by Nikita Yushchenko, where MAC addresses wouldn't match if given
as first field of a concatenated set with AVX2 and 8-bit groups,
because there's a different code path covering the lookup of six
8-bit groups (MAC addresses) if that's the first field.
Add a similar mac,net test, with MAC address and IPv4 address
swapped in the set specification.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The sixth byte of packet data has to be looked up in the sixth group,
not in the seventh one, even if we load the bucket data into ymm6
(and not ymm5, for convenience of tracking stalls).
Without this fix, matching on a MAC address as first field of a set,
if 8-bit groups are selected (due to a small set size) would fail,
that is, the given MAC address would never match.
Reported-by: Nikita Yushchenko <nikita.yushchenko@virtuozzo.com>
Cc: <stable@vger.kernel.org> # 5.6.x
Fixes: 7400b063969b ("nft_set_pipapo: Introduce AVX2-based lookup implementation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Tested-By: Nikita Yushchenko <nikita.yushchenko@virtuozzo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
After the below patch, the conntrack attached to skb is set to "notrack" in
the context of vrf device, for locally generated packets.
But this is true only when the default qdisc is set to the vrf device. When
changing the qdisc, notrack is not set anymore.
In fact, there is a shortcut in the vrf driver, when the default qdisc is
set, see commit dcdd43c41e60 ("net: vrf: performance improvements for
IPv4") for more details.
This patch ensures that the behavior is always the same, whatever the qdisc
is.
To demonstrate the difference, a new test is added in conntrack_vrf.sh.
Fixes: 8c9c296adfae ("vrf: run conntrack only in context of lower/physdev for locally generated packets")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Adding filters with the same values inside for VXLAN and Geneve causes HW
error, because it looks exactly the same. To choose between different
type of tunnels new recipe is needed. Add storing tunnel types in
creating recipes function and start checking it in finding function.
Change getting open tunnels function to return port on correct tunnel
type. This is needed to copy correct port to dummy packet.
Block user from adding enc_dst_port via tc flower, because VXLAN and
Geneve filters can be created only with destination port which was
previously opened.
Fixes: 8b032a55c1bd5 ("ice: low level support for tunnels")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In tunnels packet there can be two UDP headers:
- outer which for hw should be mark as ICE_UDP_OF
- inner which for hw should be mark as ICE_UDP_ILOS or as ICE_TCP_IL if
inner header is of TCP type
In none tunnels packet header can be:
- UDP, which for hw should be mark as ICE_UDP_ILOS
- TCP, which for hw should be mark as ICE_TCP_IL
Change incorrect ICE_UDP_OF for none tunnel packets to ICE_UDP_ILOS.
ICE_UDP_OF is incorrect for none tunnel packets and setting it leads to
error from hw while adding this kind of recipe.
In summary, for tunnel outer port type should always be set to
ICE_UDP_OF, for none tunnel outer and tunnel inner it should always be
set to ICE_UDP_ILOS.
Fixes: 9e300987d4a8 ("ice: VXLAN and Geneve TC support")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
If the hardware is constantly receiving unicast or broadcast packets
during driver load, the device previously counted many GLV_RDPC (VSI
dropped packets) events during init. This causes confusing dropped
packet statistics during driver load. The dropped packets counter
incrementing does stop once the driver finishes loading.
Avoid this problem by baselining our statistics at the end of driver
open instead of the end of probe.
Fixes: cdedef59deb0 ("ice: Configure VSIs for Tx/Rx")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The patch that implemented DSCP QoS implementation removed a
bandwidth check that was used to check for a specific condition
caused by some corner cases. This check should not of been
removed.
The same patch also added a check for when the DCBx state could
be changed in relation to DSCP, but the check was erroneously
added nested in a check for CEE mode, which made the check useless.
Fix these problems by re-adding the bandwidth check and relocating
the DSCP mode check earlier in the function that changes DCBx state
in the driver.
Fixes: 2a87bd73e50d ("ice: Add DSCP support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The other interrupt cause register (OICR), global interrupt 0, is
disabled when enabling VFs to prevent handling VFLR. If the OICR is
not rearmed then the VF cannot communicate with the PF.
Rearm the OICR after enabling VFs.
Fixes: 916c7fdf5e93 ("ice: Separate VF VSI initialization/creation from reset flow")
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When VF is being reset, ice_reset_vf() will be called and FDIR
resource should be released and initialized again.
Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF")
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ql_wait_for_drvr_lock() fails and returns false, then this
function should return an error code instead of returning success.
The other problem is that the success path prints an error message
netdev_err(ndev, "Releasing driver lock\n"); Delete that and
re-order the code a little to make it more clear.
Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211207082416.GA16110@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The order of these two parameters is just reversed. gcc didn't warn on
that, probably because 'void *' can be converted from or to other
pointer types without warning.
Cc: stable@vger.kernel.org
Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers")
Fixes: e1b1240c1ff5 ("netfs: Add write_begin helper")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Link: https://lore.kernel.org/r/20211207031449.100510-1-jefflexu@linux.alibaba.com/ # v1
|
Daniele Palmas
Eric Dumazet
Hangyu Hua
Jie2x Zhou
Sasha Levin
Russell King (Oracle)
M Chetan Kumar
José Expósito
Julian Wiedmann
Andrea Mayer
Jianglei Nie
Krzysztof Kozlowski
Tadeusz Struk
Jianguo Wu
Ameer Hamza
Jimmy Assarsson
Louis Amas
Ronak Doshi
Jesse Brandeburg
Hans de Goede
Maxim Mikityanskiy
Joakim Zhang
Yanteng Si
Petr Machata
Vadim Fedorenko
Florian Westphal
Pablo Neira Ayuso
Stefano Brivio
Nicolas Dichtel
Michal Swiatkowski
Dave Ertman
Paul Greenwalt
Yahui Cao
Dan Carpenter
Jeffle Xu