aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-08-16power: supply: smb347-charger: Utilize generic regmap cachingDmitry Osipenko1-12/+4
Utilize generic regmap caching in order to avoid unnecessary slow I2C accesses to all constant registers each time the supply status updated and remove local caching of charger state to make code cleaner. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-16power: supply: smb347-charger: Make smb347_set_writable() IRQ-safeDmitry Osipenko1-9/+21
The smb347_set_writable() is used by interrupt handler and outside of it. The interrupt should be disabled when the function is used outside of interrupt handler in order to prevent racing with the interrupt context. Add new parameter to smb347_set_writable() that allows to disable IRQ. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-16dt-bindings: power: supply: smb347-charger: Document USB VBUS regulatorDmitry Osipenko2-0/+34
SMB347 can supply power to USB VBUS, which is required by OTG-cable devices that want to switch USB port into the host mode. Add USB VBUS regulator properties. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-16power: reset: Add TPS65086 restart driverEmil Renner Berthing3-0/+105
The only way to reset the BeagleV Starlight v0.9 board[1] properly is to tell the PMIC to reset itself which will then assert the external reset lines of the SoC, USB hub and ethernet phy. This adds a driver to register a reset handler to do just that. [1] https://github.com/beagleboard/beaglev-starlight Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-16dt-bindings: power: supply: max17042: describe interruptKrzysztof Kozlowski1-0/+2
The Maxim 17042-family of fuel gauges are often embedded in other Maxim chips, e.g. in Maxim 77693 which is a companion power management IC. In such designs there might be actually two interrupts: - INTB signaling change from charger, flash or MUIC, - ALERT signaling change from fuel gauge. Describe the interrupt in bindings to make it clear it is about the fuel gauge ALERT interrupt, not the INT. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-16power: supply: max17042: remove duplicated STATUS bit definesKrzysztof Kozlowski1-4/+1
All bits of STATUS register are already defined (see STATUS_SMN_BIT and further) so there is no need to define status SoC threshold min/max values one more time. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-16power: supply: max17042: handle fails of reading status registerKrzysztof Kozlowski1-1/+5
Reading status register can fail in the interrupt handler. In such case, the regmap_read() will not store anything useful under passed 'val' variable and random stack value will be used to determine type of interrupt. Handle the regmap_read() failure to avoid handling interrupt type and triggering changed power supply event based on random stack value. Fixes: 39e7213edc4f ("max17042_battery: Support regmap to access device's registers") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-14power: supply: core: Parse battery chemistry/technologyLinus Walleij2-0/+21
This extends the struct power_supply_battery_info with a "technology" field makes the core DT parser optionally obtain this from the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-14dt-bindings: power: Extend battery bindings with chemistryLinus Walleij1-0/+14
This adds a battery-chemistry property and bindings for the different "technologies" that are used in Linux. More types can be added. This is needed to convert the custom ST-Ericsson AB8500 battery properties over to the generic battery bindings. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-13power: reset: linkstation-poweroff: add new devicePawel Dembicki1-0/+42
This commit introduces support for NETGEAR ReadyNAS Duo v2. This device use bit 4 of LED[2:0] Polarity Control Register to indicate AC Power loss. For more details about AC loss detection in NETGEAR ReadyNAS Duo v2, please look at the file: RND_5.3.13_WW.src/u-boot/board/mv_feroceon/mv_hal/usibootup/usibootup.c from Netgear GPL sources. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-13power: reset: linkstation-poweroff: prepare for new devicesPawel Dembicki1-6/+29
This commit prepare driver for another device support. New power_off_cfg structure describes two most important things: name of mdio bus and pointer to register setting function. It allow to add new device with different mdio bus node and other phy register config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-13power: supply: bq24735: reorganize ChargeOption command macrosBruno Meneguele1-12/+15
Rename ChargeOption macros to match the others for ChargeCurrent and ChargeVoltage and also separate the command & masks macros from the bits of interest macros for each command. This macro doesn't introduce any functional change, only code re-org. Signed-off-by: Bruno Meneguele <bruno.meneguele@smartgreen.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-13power: supply: rn5t618: Add voltage_now propertyAndreas Kemnade2-0/+40
Read voltage_now via IIO and provide the property. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reported-by: kernel test robot <lkp@intel.com> # missing depends on IIO Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-13iio: adc: rn5t618: Add iio mapAndreas Kemnade1-0/+23
Add iio map to allow power driver to read out values as a consumer. This approach does not block later addition of devicetree support which would be helpful if there is an in-kernel consumer for AIN0/1. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-13power: supply: mt6360_charger: add MT6360 charger supportGene Chen3-0/+879
Add basic support for the battery charger for MT6360 PMIC Signed-off-by: Gene Chen <gene_chen@richtek.com> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>