aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-28nfp: disable netpoll on representorsJakub Kicinski1-1/+1
NFP reprs are software device on top of the PF's vNIC. The comment above __dev_queue_xmit() sayeth: When calling this method, interrupts MUST be enabled. This is because the BH enable code must have IRQs enabled so that it will not deadlock. For netconsole we can't guarantee IRQ state, let's just disable netpoll on representors to be on the safe side. When the initial implementation of NFP reprs was added by the commit 5de73ee46704 ("nfp: general representor implementation") .ndo_poll_controller was required for netpoll to be enabled. Fixes: ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28nfp: validate the return code from dev_queue_xmit()Jakub Kicinski1-1/+1
dev_queue_xmit() may return error codes as well as netdev_tx_t, and it always consumes the skb. Make sure we always return a correct netdev_tx_t value. Fixes: eadfa4c3be99 ("nfp: add stats and xmit helpers for representors") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28netns: provide pure entropy for net_hash_mix()Eric Dumazet3-8/+4
net_hash_mix() currently uses kernel address of a struct net, and is used in many places that could be used to reveal this address to a patient attacker, thus defeating KASLR, for the typical case (initial net namespace, &init_net is not dynamically allocated) I believe the original implementation tried to avoid spending too many cycles in this function, but security comes first. Also provide entropy regardless of CONFIG_NET_NS. Fixes: 0b4419162aa6 ("netns: introduce the net_hash_mix "salt" for hashes") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Amit Klein <aksecurity@gmail.com> Reported-by: Benny Pinkas <benny@pinkas.net> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28qmi_wwan: add Olicard 600Bjørn Mork1-0/+1
This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28net: dsa: Implement flow_dissect callback for tag_qcaxiaofeis1-0/+10
Add flow_dissect for qca tagged packet to get the right hash. Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27vrf: prevent adding upper devicesSabrina Dubroca1-0/+1
VRF devices don't work with upper devices. Currently, it's possible to add a VRF device to a bridge or team, and to create macvlan, macsec, or ipvlan devices on top of a VRF (bond and vlan are prevented respectively by the lack of an ndo_set_mac_address op and the NETIF_F_VLAN_CHALLENGED feature flag). Fix this by setting the IFF_NO_RX_HANDLER flag (introduced in commit f5426250a6ec ("net: introduce IFF_NO_RX_HANDLER")). Cc: David Ahern <dsahern@gmail.com> Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27thunderx: eliminate extra calls to put_page() for pages held for recyclingDean Nelson1-4/+3
For the non-XDP case, commit 773225388dae15e72790 ("net: thunderx: Optimize page recycling for XDP") added code to nicvf_free_rbdr() that, when releasing the additional receive buffer page reference held for recycling, repeatedly calls put_page() until the page's _refcount goes to zero. Which results in the page being freed. This is not okay if the page's _refcount was greater than 1 (in the non-XDP case), because nicvf_free_rbdr() should not be subtracting more than what nicvf_alloc_page() had previously added to the page's _refcount, which was only 1 (in the non-XDP case). This can arise if a received packet is still being processed and the receive buffer (i.e., skb->head) has not yet been freed via skb_free_head() when nicvf_free_rbdr() is spinning through the aforementioned put_page() loop. If this should occur, when the received packet finishes processing and skb_free_head() is called, various problems can ensue. Exactly what, depends on whether the page has already been reallocated or not, anything from "BUG: Bad page state ... ", to "Unable to handle kernel NULL pointer dereference ..." or "Unable to handle kernel paging request...". So this patch changes nicvf_free_rbdr() to only call put_page() once for pages held for recycling (in the non-XDP case). Fixes: 773225388dae ("net: thunderx: Optimize page recycling for XDP") Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27thunderx: enable page recycling for non-XDP caseDean Nelson1-12/+11
Commit 773225388dae15e72790 ("net: thunderx: Optimize page recycling for XDP") added code to nicvf_alloc_page() that inadvertently disables receive buffer page recycling for the non-XDP case by always NULL'ng the page pointer. This patch corrects two if-conditionals to allow for the recycling of non-XDP mode pages by only setting the page pointer to NULL when the page is not ready for recycling. Fixes: 773225388dae ("net: thunderx: Optimize page recycling for XDP") Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mii: Fix PAUSE cap advertisement from linkmode_adv_to_lcl_adv_t() helperClaudiu Manoil1-1/+1
With a recent link mode advertisement code update this helper providing local pause capability translation used for flow control link mode negotiation got broken. For eth drivers using this helper, the issue is apparent only if either PAUSE or ASYM_PAUSE is being advertised. Fixes: 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: hns3: fix compile errorXi Wang2-2/+2
Currently, the rules for configuring search paths in Kbuild have changed, this will lead some erros when compiling hns3 with the following command: make O=DIR M=drivers/net/ethernet/hisilicon/hns3 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:11:10: fatal error: hnae3.h: No such file or directory This patch fix it by adding $(srctree)/ prefix to the serach paths. Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27ila: Fix rhashtable walker list corruptionHerbert Xu1-0/+1
ila_xlat_nl_cmd_flush uses rhashtable walkers allocated from the stack but it never frees them. This corrupts the walker list of the hash table. This patch fixes it. Reported-by: syzbot+dae72a112334aa65a159@syzkaller.appspotmail.com Fixes: b6e71bdebb12 ("ila: Flush netlink command to clear xlat...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27MAINTAINERS: Fix documentation file name for PHY LibraryFlorian Fainelli1-1/+1
MAINTAINERS still pointed to phy.txt after moving this file into the rst format, fix this. Reported-by: Joe Perches <joe@perches.com> Fixes: 25fe02d00a1e ("Documentation: net: phy: switch documentation to rst format") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: datagram: fix unbounded loop in __skb_try_recv_datagram()Paolo Abeni1-1/+1
Christoph reported a stall while peeking datagram with an offset when busy polling is enabled. __skb_try_recv_datagram() uses as the loop termination condition 'queue empty'. When peeking, the socket queue can be not empty, even when no additional packets are received. Address the issue explicitly checking for receive queue changes, as currently done by __skb_wait_for_more_packets(). Fixes: 2b5cd0dfa384 ("net: Change return type of sk_busy_loop from bool to void") Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: dsa: mv88e6xxx: fix few issues in mv88e6390x_port_set_cmodeHeiner Kallweit1-8/+16
This patches fixes few issues in mv88e6390x_port_set_cmode(). 1. When entering the function the old cmode may be 0, in this case mv88e6390x_serdes_get_lane() returns -ENODEV. As result we bail out and have no chance to set a new mode. Therefore deal properly with -ENODEV. 2. Once we have disabled power and irq, let's set the cached cmode to 0. This reflects the actual status and is cleaner if we bail out with an error in the following function calls. 3. The cached cmode is used by mv88e6390x_serdes_get_lane(), mv88e6390_serdes_power_lane() and mv88e6390_serdes_irq_enable(). Currently we set the cached mode to the new one at the very end of the function only, means until then we use the old one what may be wrong. 4. When calling mv88e6390_serdes_irq_enable() we use the lane value belonging to the old cmode. Get the lane belonging to the new cmode before calling this function. It's hard to provide a good "Fixes" tag because quite a few smaller changes have been done to the code in question recently. Fixes: d235c48b40d3 ("net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26fm10k: Fix a potential NULL pointer dereferenceYue Haibing1-0/+2
Syzkaller report this: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 4378 Comm: syz-executor.0 Tainted: G C 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__lock_acquire+0x95b/0x3200 kernel/locking/lockdep.c:3573 Code: 00 0f 85 28 1e 00 00 48 81 c4 08 01 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 4c 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 24 00 00 49 81 7d 00 e0 de 03 a6 41 bc 00 00 RSP: 0018:ffff8881e3c07a40 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000080 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8881e3c07d98 R11: ffff8881c7f21f80 R12: 0000000000000001 R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000001 FS: 00007fce2252e700(0000) GS:ffff8881f2400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fffc7eb0228 CR3: 00000001e5bea002 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: lock_acquire+0xff/0x2c0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xdf/0x1050 kernel/locking/mutex.c:1072 drain_workqueue+0x24/0x3f0 kernel/workqueue.c:2934 destroy_workqueue+0x23/0x630 kernel/workqueue.c:4319 __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x30c/0x480 kernel/module.c:961 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fce2252dc58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fce2252e6bc R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff If alloc_workqueue fails, it should return -ENOMEM, otherwise may trigger this NULL pointer dereference while unloading drivers. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 0a38c17a21a0 ("fm10k: Remove create_workqueue") Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26i40e: fix WoL support checkStefan Assmann1-2/+1
The current check for WoL on i40e is broken. Code comment says only magic packet is supported, so only check for that. Fixes: 540a152da762 (i40e/ixgbe/igb: fail on new WoL flag setting WAKE_MAGICSECURE) Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26ixgbe: fix mdio bus registrationIvan Vecera1-7/+9
The ixgbe ignores errors returned from mdiobus_register() and leaves adapter->mii_bus non-NULL and MDIO bus state as MDIOBUS_ALLOCATED. This triggers a BUG from mdiobus_unregister() during ixgbe_remove() call. Fixes: 8fa10ef01260 ("ixgbe: register a mdiobus") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26igb: Fix WARN_ONCE on runtime suspendArvind Sankar2-49/+10
The runtime_suspend device callbacks are not supposed to save configuration state or change the power state. Commit fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") changed the driver to not save configuration state during runtime suspend, however the driver callback still put the device into a low-power state. This causes a warning in the pci pm core and results in pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend. Fix this by not changing the power state either, leaving that to pci pm core, and make the same change for suspend callback as well. Also move a couple of defines into the appropriate header file instead of inline in the .c file. Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") Signed-off-by: Arvind Sankar <niveditas98@gmail.com> Reviewed-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26i40e: fix i40e_ptp_adjtime when given a negative deltaJacob Keller1-2/+3
Commit 0ac30ce43323 ("i40e: fix up 32 bit timespec references", 2017-07-26) claims to be cleaning up references to 32-bit timespecs. The actual contents of the commit make no sense, as it converts a call to timespec64_add into timespec64_add_ns. This would seem ok, if (a) the change was documented in the commit message, and (b) timespec64_add_ns supported negative numbers. timespec64_add_ns doesn't work with signed deltas, because the implementation is based around iter_div_u64_rem. This change resulted in a regression where i40e_ptp_adjtime would interpret small negative adjustments as large positive additions, resulting in incorrect behavior. This commit doesn't appear to fix anything, is not well explained, and introduces a bug, so lets just revert it. Reverts: 0ac30ce43323 ("i40e: fix up 32 bit timespec references", 2017-07-26) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-26SUNRPC: fix uninitialized variable warningAlakesh Haloi1-2/+2
Avoid following compiler warning on uninitialized variable net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’: net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized] return read; ^~~~ net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] return ret < 0 ? ret : read; ~~~~~~~~~~~~~~^~~~~~ Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-26dpaa2-eth: fix race condition with bql frame accountingIoana Ciornei1-4/+9
It might happen that Tx conf acknowledges a frame before it was subscribed in bql, as subscribing was previously done after the enqueue operation. This patch moves the netdev_tx_sent_queue call before the actual frame enqueue, so that this can never happen. Fixes: 569dac6a5a0d ("dpaa2-eth: bql support") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26chelsio: use BUG() instead of BUG_ON(1)Arnd Bergmann2-2/+2
clang warns about possible bugs in a dead code branch after BUG_ON(1) when CONFIG_PROFILE_ALL_BRANCHES is enabled: drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: error: variable 'buf_size' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] BUG_ON(1); ^~~~~~~~~ include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^~~~~~~~~~~~~~~~~~~ include/linux/compiler.h:48:23: note: expanded from macro 'unlikely' # define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/sge.c:482:9: note: uninitialized use occurs here return buf_size; ^~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: note: remove the 'if' if its condition is always true BUG_ON(1); ^ include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^ drivers/net/ethernet/chelsio/cxgb4/sge.c:459:14: note: initialize the variable 'buf_size' to silence this warning int buf_size; ^ = 0 Use BUG() here to create simpler code that clang understands correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: devlink: skip info_get op call if it is not defined in dumpitJiri Pirko1-0/+5
In dumpit, unlike doit, the check for info_get op being defined is missing. Add it and avoid null pointer dereference in case driver does not define this op. Fixes: f9cf22882c60 ("devlink: add device information API") Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: phy: bcm54xx: Encode link speed and activity into LEDsVladimir Oltean2-0/+29
Previously the green and amber LEDs on this quad PHY were solid, to indicate an encoding of the link speed (10/100/1000). This keeps the LEDs always on just as before, but now they flash on Rx/Tx activity. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26tipc: change to check tipc_own_id to return in tipc_net_stopXin Long1-4/+1
When running a syz script, a panic occurred: [ 156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.094315] Call Trace: [ 156.094844] <IRQ> [ 156.095306] dump_stack+0x7c/0xc0 [ 156.097346] print_address_description+0x65/0x22e [ 156.100445] kasan_report.cold.3+0x37/0x7a [ 156.102402] tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.106517] call_timer_fn+0x19a/0x610 [ 156.112749] run_timer_softirq+0xb51/0x1090 It was caused by the netns freed without deleting the discoverer timer, while later on the netns would be accessed in the timer handler. The timer should have been deleted by tipc_net_stop() when cleaning up a netns. However, tipc has been able to enable a bearer and start d->timer without the local node_addr set since Commit 52dfae5c85a4 ("tipc: obtain node identity from interface by default"), which caused the timer not to be deleted in tipc_net_stop() then. So fix it in tipc_net_stop() by changing to check local node_id instead of local node_addr, as Jon suggested. While at it, remove the calling of tipc_nametbl_withdraw() there, since tipc_nametbl_stop() will take of the nametbl's freeing after. Fixes: 52dfae5c85a4 ("tipc: obtain node identity from interface by default") Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: usb: aqc111: Extend HWID table by QNAP deviceDmitry Bezrukov2-0/+23
New device of QNAP based on aqc111u Add this ID to blacklist of cdc_ether driver as well Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: sched: Kconfig: update reference link for PIELeslie Monis1-2/+1
RFC 8033 replaces the IETF draft for PIE Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: dsa: qca8k: extend slave-bus implementationsChristian Lamparter2-1/+168
This patch implements accessors for the QCA8337 MDIO access through the MDIO_MASTER register, which makes it possible to access the PHYs on slave-bus through the switch. In cases where the switch ports are already mapped via external "phy-phandles", the internal mdio-bus is disabled in order to prevent a duplicated discovery and enumeration of the same PHYs. Don't use mixed external and internal mdio-bus configurations, as this is not supported by the hardware. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26net: dsa: qca8k: remove leftover phy accessorsChristian Lamparter1-18/+0
This belated patch implements Andrew Lunn's request of "remove the phy_read() and phy_write() functions." <https://lore.kernel.org/patchwork/comment/902734/> While seemingly harmless, this causes the switch's user port PHYs to get registered twice. This is because the DSA subsystem will create a slave mdio-bus not knowing that the qca8k_phy_(read|write) accessors operate on the external mdio-bus. So the same "bus" gets effectively duplicated. Cc: stable@vger.kernel.org Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26dt-bindings: net: dsa: qca8k: support internal mdio-busChristian Lamparter1-5/+64
This patch updates the qca8k's binding to document to the approach for using the internal mdio-bus of the supported qca8k switches. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26dt-bindings: net: dsa: qca8k: fix exampleChristian Lamparter1-2/+2
In the example, the phy at phy@0 is clashing with the switch0@0 at the same address. Usually, the switches are accessible through pseudo PHYs which in case of the qca8k are located at 0x10 - 0x18. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26ftrace: Fix warning using plain integer as NULL & spelling correctionsHariprasad Kelam1-6/+6
Changed 0 --> NULL to avoid sparse warning Corrected spelling mistakes reported by checkpatch.pl Sparse warning below: sudo make C=2 CF=-D__CHECK_ENDIAN__ M=kernel/trace CHECK kernel/trace/ftrace.c kernel/trace/ftrace.c:3007:24: warning: Using plain integer as NULL pointer kernel/trace/ftrace.c:4758:37: warning: Using plain integer as NULL pointer Link: http://lkml.kernel.org/r/20190323183523.GA2244@hari-Inspiron-1545 Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-26tracing: initialize variable in create_dyn_event()Frank Rowand1-1/+1
Fix compile warning in create_dyn_event(): 'ret' may be used uninitialized in this function [-Wuninitialized]. Link: http://lkml.kernel.org/r/1553237900-8555-1-git-send-email-frowand.list@gmail.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Fixes: 5448d44c3855 ("tracing: Add unified dynamic event framework") Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-26tracing: Remove unnecessary var_ref destroy in track_data_destroy()Tom Zanussi1-1/+0
Commit 656fe2ba85e8 (tracing: Use hist trigger's var_ref array to destroy var_refs) centralized the destruction of all the var_refs in one place so that other code didn't have to do it. The track_data_destroy() added later ignored that and also destroyed the track_data var_ref, causing a double-free error flagged by KASAN. ================================================================== BUG: KASAN: use-after-free in destroy_hist_field+0x30/0x70 Read of size 8 at addr ffff888086df2210 by task bash/1694 CPU: 6 PID: 1694 Comm: bash Not tainted 5.1.0-rc1-test+ #15 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 Call Trace: dump_stack+0x71/0xa0 ? destroy_hist_field+0x30/0x70 print_address_description.cold.3+0x9/0x1fb ? destroy_hist_field+0x30/0x70 ? destroy_hist_field+0x30/0x70 kasan_report.cold.4+0x1a/0x33 ? __kasan_slab_free+0x100/0x150 ? destroy_hist_field+0x30/0x70 destroy_hist_field+0x30/0x70 track_data_destroy+0x55/0xe0 destroy_hist_data+0x1f0/0x350 hist_unreg_all+0x203/0x220 event_trigger_open+0xbb/0x130 do_dentry_open+0x296/0x700 ? stacktrace_count_trigger+0x30/0x30 ? generic_permission+0x56/0x200 ? __x64_sys_fchdir+0xd0/0xd0 ? inode_permission+0x55/0x200 ? security_inode_permission+0x18/0x60 path_openat+0x633/0x22b0 ? path_lookupat.isra.50+0x420/0x420 ? __kasan_kmalloc.constprop.12+0xc1/0xd0 ? kmem_cache_alloc+0xe5/0x260 ? getname_flags+0x6c/0x2a0 ? do_sys_open+0x149/0x2b0 ? do_syscall_64+0x73/0x1b0 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 ? _raw_write_lock_bh+0xe0/0xe0 ? __kernel_text_address+0xe/0x30 ? unwind_get_return_address+0x2f/0x50 ? __list_add_valid+0x2d/0x70 ? deactivate_slab.isra.62+0x1f4/0x5a0 ? getname_flags+0x6c/0x2a0 ? set_track+0x76/0x120 do_filp_open+0x11a/0x1a0 ? may_open_dev+0x50/0x50 ? _raw_spin_lock+0x7a/0xd0 ? _raw_write_lock_bh+0xe0/0xe0 ? __alloc_fd+0x10f/0x200 do_sys_open+0x1db/0x2b0 ? filp_open+0x50/0x50 do_syscall_64+0x73/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa7b24a4ca2 Code: 25 00 00 41 00 3d 00 00 41 00 74 4c 48 8d 05 85 7a 0d 00 8b 00 85 c0 75 6d 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 0f 87 a2 00 00 00 48 8b 4c 24 28 64 48 33 0c 25 RSP: 002b:00007fffbafb3af0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 000055d3648ade30 RCX: 00007fa7b24a4ca2 RDX: 0000000000000241 RSI: 000055d364a55240 RDI: 00000000ffffff9c RBP: 00007fffbafb3bf0 R08: 0000000000000020 R09: 0000000000000002 R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 000055d364a55240 ================================================================== So remove the track_data_destroy() destroy_hist_field() call for that var_ref. Link: http://lkml.kernel.org/r/1deffec420f6a16d11dd8647318d34a66d1989a9.camel@linux.intel.com Fixes: 466f4528fbc69 ("tracing: Generalize hist trigger onmax and save action") Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-25net: phy: don't clear BMCR in genphy_soft_resetHeiner Kallweit1-1/+1
So far we effectively clear the BMCR register. Some PHY's can deal with this (e.g. because they reset BMCR to a default as part of a soft-reset) whilst on others this causes issues because e.g. the autoneg bit is cleared. Marvell is an example, see also thread [0]. So let's be a little bit more gentle and leave all bits we're not interested in as-is. This change is needed for PHY drivers to properly deal with the original patch. [0] https://marc.info/?t=155264050700001&r=1&w=2 Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Tested-by: Phil Reid <preid@electromag.com.au> Tested-by: liweihang <liweihang@hisilicon.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-25Revert "parport: daisy: use new parport device model"Linus Torvalds4-54/+3
This reverts commit 1aec4211204d9463d1fd209eb50453de16254599. Steven Rostedt reports that it causes a hang at bootup and bisected it to this commit. The troigger is apparently a module alias for "parport_lowlevel" that points to "parport_pc", which causes a hang with modprobe -q -- parport_lowlevel blocking forever with a backtrace like this: wait_for_completion_killable+0x1c/0x28 call_usermodehelper_exec+0xa7/0x108 __request_module+0x351/0x3d8 get_lowlevel_driver+0x28/0x41 [parport] __parport_register_driver+0x39/0x1f4 [parport] daisy_drv_init+0x31/0x4f [parport] parport_bus_init+0x5d/0x7b [parport] parport_default_proc_register+0x26/0x1000 [parport] do_one_initcall+0xc2/0x1e0 do_init_module+0x50/0x1d4 load_module+0x1c2e/0x21b3 sys_init_module+0xef/0x117 Supid says: "Due to the new device model daisy driver will now try to find the parallel ports while trying to register its driver so that it can bind with them. Now, since daisy driver is loaded while parport bus is initialising the list of parport is still empty and it tries to load the lowlevel driver, which has an alias set to parport_pc, now causes a deadlock" But I don't think the daisy driver should be loaded by the parport initialization in the first place, so let's revert the whole change. If the daisy driver can just initialize separately on its own (like a driver should), instead of hooking into the parport init sequence directly, this issue probably would go away. Reported-and-bisected-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reported-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-25locks: wake any locks blocked on request before deadlock checkJeff Layton1-0/+5
Andreas reported that he was seeing the tdbtorture test fail in some cases with -EDEADLCK when it wasn't before. Some debugging showed that deadlock detection was sometimes discovering the caller's lock request itself in a dependency chain. While we remove the request from the blocked_lock_hash prior to reattempting to acquire it, any locks that are blocked on that request will still be present in the hash and will still have their fl_blocker pointer set to the current request. This causes posix_locks_deadlock to find a deadlock dependency chain when it shouldn't, as a lock request cannot block itself. We are going to end up waking all of those blocked locks anyway when we go to reinsert the request back into the blocked_lock_hash, so just do it prior to checking for deadlocks. This ensures that any lock blocked on the current request will no longer be part of any blocked request chain. URL: https://bugzilla.kernel.org/show_bug.cgi?id=202975 Fixes: 5946c4319ebb ("fs/locks: allow a lock request to block other requests.") Cc: stable@vger.kernel.org Reported-by: Andreas Schneider <asn@redhat.com> Signed-off-by: Neil Brown <neilb@suse.com> Signed-off-by: Jeff Layton <jlayton@kernel.org>
2019-03-25batman-adv: Fix genl notification for throughput_overrideSven Eckelmann1-2/+5
The throughput_override sysfs file is not below the meshif but below a hardif. The kobj has therefore not a pointer which can be used to find the batadv_priv data. The pointer stored in the hardif object must be used instead to find the correct meshif private data. Fixes: 7e6f461efe25 ("batman-adv: Trigger genl notification on sysfs config change") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: fix warning in function batadv_v_elp_get_throughputAnders Roxell1-2/+4
When CONFIG_CFG80211 isn't enabled the compiler correcly warns about 'sinfo.pertid' may be unused. It can also happen for other error conditions that it not warn about. net/batman-adv/bat_v_elp.c: In function ‘batadv_v_elp_get_throughput.isra.0’: include/net/cfg80211.h:6370:13: warning: ‘sinfo.pertid’ may be used uninitialized in this function [-Wmaybe-uninitialized] kfree(sinfo->pertid); ~~~~~^~~~~~~~ Rework so that we only release '&sinfo' if cfg80211_get_station returns zero. Fixes: 7d652669b61d ("batman-adv: release station info tidstats") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: Reduce tt_global hash refcnt only for removed entrySven Eckelmann1-3/+15
The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_tt_global_free is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: 7683fdc1e886 ("batman-adv: protect the local and the global trans-tables with rcu") Reported-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: Reduce tt_local hash refcnt only for removed entrySven Eckelmann1-5/+9
The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_tt_local_remove is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: ef72706a0543 ("batman-adv: protect tt_local_entry from concurrent delete events") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: Reduce claim hash refcnt only for removed entrySven Eckelmann1-3/+13
The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_bla_del_claim is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-24bpf, libbpf: clarify bump in libbpf version infoDaniel Borkmann1-0/+1
The current documentation suggests that we would need to bump the libbpf version on every change. Lets clarify this a bit more and reflect what we do today in practice, that is, bumping it once per development cycle. Fixes: 76d1b894c515 ("libbpf: Document API and ABI conventions") Reported-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-24bpf, libbpf: fix version info and add it to shared objectDaniel Borkmann1-14/+28
Even though libbpf's versioning script for the linker (libbpf.map) is pointing to 0.0.2, the BPF_EXTRAVERSION in the Makefile has not been updated along with it and is therefore still on 0.0.1. While fixing up, I also noticed that the generated shared object versioning information is missing, typical convention is to have a linker name (libbpf.so), soname (libbpf.so.0) and real name (libbpf.so.0.0.2) for library management. This is based upon the LIBBPF_VERSION as well. The build will then produce the following bpf libraries: # ll libbpf* libbpf.a libbpf.so -> libbpf.so.0.0.2 libbpf.so.0 -> libbpf.so.0.0.2 libbpf.so.0.0.2 # readelf -d libbpf.so.0.0.2 | grep SONAME 0x000000000000000e (SONAME) Library soname: [libbpf.so.0] And install them accordingly: # rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld install Auto-detecting system features: ... libelf: [ on ] ... bpf: [ on ] CC /tmp/bld/libbpf.o CC /tmp/bld/bpf.o CC /tmp/bld/nlattr.o CC /tmp/bld/btf.o CC /tmp/bld/libbpf_errno.o CC /tmp/bld/str_error.o CC /tmp/bld/netlink.o CC /tmp/bld/bpf_prog_linfo.o CC /tmp/bld/libbpf_probes.o CC /tmp/bld/xsk.o LD /tmp/bld/libbpf-in.o LINK /tmp/bld/libbpf.a LINK /tmp/bld/libbpf.so.0.0.2 LINK /tmp/bld/test_libbpf INSTALL /tmp/bld/libbpf.a INSTALL /tmp/bld/libbpf.so.0.0.2 # ll /usr/local/lib64/libbpf.* /usr/local/lib64/libbpf.a /usr/local/lib64/libbpf.so -> libbpf.so.0.0.2 /usr/local/lib64/libbpf.so.0 -> libbpf.so.0.0.2 /usr/local/lib64/libbpf.so.0.0.2 Fixes: 1bf4b05810fe ("tools: bpftool: add probes for eBPF program types") Fixes: 1b76c13e4b36 ("bpf tools: Introduce 'bpf' library and add bpf feature check") Reported-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-24Linux 5.1-rc2Linus Torvalds1-1/+1
2019-03-24clocksource/drivers/clps711x: Remove board supportAlexander Shiyan1-32/+13
Since board support for the CLPS711X platform was removed, remove the board support from the clps711x-timer driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/20181220111626.17140-1-shc_work@mail.ru
2019-03-23rxrpc: avoid clang -Wuninitialized warningArnd Bergmann1-6/+5
clang produces a false-positive warning as it fails to notice that "lost = true" implies that "ret" is initialized: net/rxrpc/output.c:402:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (lost) ^~~~ net/rxrpc/output.c:437:6: note: uninitialized use occurs here if (ret >= 0) { ^~~ net/rxrpc/output.c:402:2: note: remove the 'if' if its condition is always false if (lost) ^~~~~~~~~ net/rxrpc/output.c:339:9: note: initialize the variable 'ret' to silence this warning int ret, opt; ^ = 0 Rearrange the code to make that more obvious and avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23tipc: tipc clang warningJon Maloy1-3/+4
When checking the code with clang -Wsometimes-uninitialized we get the following warning: if (!tipc_link_is_establishing(l)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/tipc/node.c:847:46: note: uninitialized use occurs here tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr); net/tipc/node.c:831:2: note: remove the 'if' if its condition is always true if (!tipc_link_is_establishing(l)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/tipc/node.c:821:31: note: initialize the variable 'maddr' to silence this warning struct tipc_media_addr *maddr; We fix this by initializing 'maddr' to NULL. For the matter of clarity, we also test if 'xmitq' is non-empty before we use it and 'maddr' further down in the function. It will never happen that 'xmitq' is non- empty at the same time as 'maddr' is NULL, so this is a sufficient test. Fixes: 598411d70f85 ("tipc: make resetting of links non-atomic") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: sched: fix cleanup NULL pointer exception in act_mirrJohn Hurley1-2/+5
A new mirred action is created by the tcf_mirred_init function. This contains a list head struct which is inserted into a global list on successful creation of a new action. However, after a creation, it is still possible to error out and call the tcf_idr_release function. This, in turn, calls the act_mirr cleanup function via __tcf_idr_release and __tcf_action_put. This cleanup function tries to delete the list entry which is as yet uninitialised, leading to a NULL pointer exception. Fix this by initialising the list entry on creation of a new action. Bug report: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 8000000840c73067 P4D 8000000840c73067 PUD 858dcc067 PMD 0 Oops: 0002 [#1] SMP PTI CPU: 32 PID: 5636 Comm: handler194 Tainted: G OE 5.0.0+ #186 Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.3.6 06/03/2015 RIP: 0010:tcf_mirred_release+0x42/0xa7 [act_mirred] Code: f0 90 39 c0 e8 52 04 57 c8 48 c7 c7 b8 80 39 c0 e8 94 fa d4 c7 48 8b 93 d0 00 00 00 48 8b 83 d8 00 00 00 48 c7 c7 f0 90 39 c0 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 d0 00 RSP: 0018:ffffac4aa059f688 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9dcd1b214d00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9dcd1fa165f8 RDI: ffffffffc03990f0 RBP: ffff9dccf9c7af80 R08: 0000000000000a3b R09: 0000000000000000 R10: ffff9dccfa11f420 R11: 0000000000000000 R12: 0000000000000001 R13: ffff9dcd16b433c0 R14: ffff9dcd1b214d80 R15: 0000000000000000 FS: 00007f441bfff700(0000) GS:ffff9dcd1fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000839e64004 CR4: 00000000001606e0 Call Trace: tcf_action_cleanup+0x59/0xca __tcf_action_put+0x54/0x6b __tcf_idr_release.cold.33+0x9/0x12 tcf_mirred_init.cold.20+0x22e/0x3b0 [act_mirred] tcf_action_init_1+0x3d0/0x4c0 tcf_action_init+0x9c/0x130 tcf_exts_validate+0xab/0xc0 fl_change+0x1ca/0x982 [cls_flower] tc_new_tfilter+0x647/0x8d0 ? load_balance+0x14b/0x9e0 rtnetlink_rcv_msg+0xe3/0x370 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? _cond_resched+0x15/0x30 ? __kmalloc_node_track_caller+0x1d4/0x2b0 ? rtnl_calcit.isra.31+0xf0/0xf0 netlink_rcv_skb+0x49/0x110 netlink_unicast+0x16f/0x210 netlink_sendmsg+0x1df/0x390 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x27b/0x2c0 ? futex_wake+0x80/0x140 ? do_futex+0x2b9/0xac0 ? ep_scan_ready_list.constprop.22+0x1f2/0x210 ? ep_poll+0x7a/0x430 __sys_sendmsg+0x47/0x80 do_syscall_64+0x55/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 4e232818bd32 ("net: sched: act_mirred: remove dependency on rtnl lock") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23r8169: fix cable re-plugging issueHeiner Kallweit1-1/+1
Bartek reported that after few cable unplug/replug cycles suddenly replug isn't detected any longer. His system uses a RTL8106, I wasn't able to reproduce the issue with RTL8168g. According to his bisect the referenced commit caused the regression. As Realtek doesn't release datasheets or errata it's hard to say what's the actual root cause, but this change was reported to fix the issue. Fixes: 38caff5a445b ("r8169: handle all interrupt events in the hard irq handler") Reported-by: Bartosz Skrzypczak <barteks2x@gmail.com> Suggested-by: Bartosz Skrzypczak <barteks2x@gmail.com> Tested-by: Bartosz Skrzypczak <barteks2x@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.