Age | Commit message (Collapse) | Author | Files | Lines |
|
Add test_rss_default_context_rule() to verify that ntuple rules can
correctly direct traffic to the default RSS context (context 0).
The test creates two ntuple rules with explicit location priorities:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.
This validates that:
1. Rules targeting the default context function properly.
2. Traffic steering works as expected when mixing default and
additional RSS contexts.
The test was written by AI, and reviewed by humans.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Context 0 (default context) always exists, there is no need to check
whether it exists or not when adding a flow steering rule.
The existing check fails when creating a flow steering rule for context
0 as it is not stored in the rss_ctx xarray.
For example:
$ ethtool --config-ntuple eth2 flow-type tcp4 dst-ip 194.237.147.23 dst-port 19983 context 0 loc 618
rmgr: Cannot insert RX class rule: Invalid argument
Cannot insert classification rule
An example usecase for this could be:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.
This is a user-visible regression that was caught in our testing
environment, it was not reported by a user yet.
Fixes: de7f7582dff2 ("net: ethtool: prevent flow steering to RSS contexts which don't exist")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250612071958.1696361-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before the cited commit, the kernel unconditionally embedded SCM
credentials to skb for embryo sockets even when both the sender
and listener disabled SO_PASSCRED and SO_PASSPIDFD.
Now, the credentials are added to skb only when configured by the
sender or the listener.
However, as reported in the link below, it caused a regression for
some programs that assume credentials are included in every skb,
but sometimes not now.
The only problematic scenario would be that a socket starts listening
before setting the option. Then, there will be 2 types of non-small
race window, where a client can send skb without credentials, which
the peer receives as an "invalid" message (and aborts the connection
it seems ?):
Client Server
------ ------
s1.listen() <-- No SO_PASS{CRED,PIDFD}
s2.connect()
s2.send() <-- w/o cred
s1.setsockopt(SO_PASS{CRED,PIDFD})
s2.send() <-- w/ cred
or
Client Server
------ ------
s1.listen() <-- No SO_PASS{CRED,PIDFD}
s2.connect()
s2.send() <-- w/o cred
s3, _ = s1.accept() <-- Inherit cred options
s2.send() <-- w/o cred but not set yet
s3.setsockopt(SO_PASS{CRED,PIDFD})
s2.send() <-- w/ cred
It's unfortunate that buggy programs depend on the behaviour,
but let's restore the previous behaviour.
Fixes: 3f84d577b79d ("af_unix: Inherit sk_flags at connect().")
Reported-by: Jacek Łuczak <difrost.kernel@gmail.com>
Closes: https://lore.kernel.org/all/68d38b0b-1666-4974-85d4-15575789c8d4@gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Tested-by: Christian Heusel <christian@heusel.eu>
Tested-by: André Almeida <andrealmeid@igalia.com>
Tested-by: Jacek Łuczak <difrost.kernel@gmail.com>
Link: https://patch.msgid.link/20250611202758.3075858-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller created an IPv6 route from a malformed packet, which has
a prefix len > 128, triggering the splat below. [0]
This is a similar issue fixed by commit 586ceac9acb7 ("ipv6: Restore
fib6_config validation for SIOCADDRT.").
The cited commit removed fib6_config validation from some callers
of ip6_add_route().
Let's move the validation back to ip6_route_add() and
ip6_route_multipath_add().
[0]:
UBSAN: array-index-out-of-bounds in ./include/net/ipv6.h:616:34
index 20 is out of range for type '__u8 [16]'
CPU: 1 UID: 0 PID: 7444 Comm: syz.0.708 Not tainted 6.16.0-rc1-syzkaller-g19272b37aa4f #0 PREEMPT
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80078a80>] dump_backtrace+0x2e/0x3c arch/riscv/kernel/stacktrace.c:132
[<ffffffff8000327a>] show_stack+0x30/0x3c arch/riscv/kernel/stacktrace.c:138
[<ffffffff80061012>] __dump_stack lib/dump_stack.c:94 [inline]
[<ffffffff80061012>] dump_stack_lvl+0x12e/0x1a6 lib/dump_stack.c:120
[<ffffffff800610a6>] dump_stack+0x1c/0x24 lib/dump_stack.c:129
[<ffffffff8001c0ea>] ubsan_epilogue+0x14/0x46 lib/ubsan.c:233
[<ffffffff819ba290>] __ubsan_handle_out_of_bounds+0xf6/0xf8 lib/ubsan.c:455
[<ffffffff85b363a4>] ipv6_addr_prefix include/net/ipv6.h:616 [inline]
[<ffffffff85b363a4>] ip6_route_info_create+0x8f8/0x96e net/ipv6/route.c:3793
[<ffffffff85b635da>] ip6_route_add+0x2a/0x1aa net/ipv6/route.c:3889
[<ffffffff85b02e08>] addrconf_prefix_route+0x2c4/0x4e8 net/ipv6/addrconf.c:2487
[<ffffffff85b23bb2>] addrconf_prefix_rcv+0x1720/0x1e62 net/ipv6/addrconf.c:2878
[<ffffffff85b92664>] ndisc_router_discovery+0x1a06/0x3504 net/ipv6/ndisc.c:1570
[<ffffffff85b99038>] ndisc_rcv+0x500/0x600 net/ipv6/ndisc.c:1874
[<ffffffff85bc2c18>] icmpv6_rcv+0x145e/0x1e0a net/ipv6/icmp.c:988
[<ffffffff85af6798>] ip6_protocol_deliver_rcu+0x18a/0x1976 net/ipv6/ip6_input.c:436
[<ffffffff85af8078>] ip6_input_finish+0xf4/0x174 net/ipv6/ip6_input.c:480
[<ffffffff85af8262>] NF_HOOK include/linux/netfilter.h:317 [inline]
[<ffffffff85af8262>] NF_HOOK include/linux/netfilter.h:311 [inline]
[<ffffffff85af8262>] ip6_input+0x16a/0x70c net/ipv6/ip6_input.c:491
[<ffffffff85af8dcc>] ip6_mc_input+0x5c8/0x1268 net/ipv6/ip6_input.c:588
[<ffffffff85af6112>] dst_input include/net/dst.h:469 [inline]
[<ffffffff85af6112>] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
[<ffffffff85af6112>] NF_HOOK include/linux/netfilter.h:317 [inline]
[<ffffffff85af6112>] NF_HOOK include/linux/netfilter.h:311 [inline]
[<ffffffff85af6112>] ipv6_rcv+0x5ae/0x6e0 net/ipv6/ip6_input.c:309
[<ffffffff85087e84>] __netif_receive_skb_one_core+0x106/0x16e net/core/dev.c:5977
[<ffffffff85088104>] __netif_receive_skb+0x2c/0x144 net/core/dev.c:6090
[<ffffffff850883c6>] netif_receive_skb_internal net/core/dev.c:6176 [inline]
[<ffffffff850883c6>] netif_receive_skb+0x1aa/0xbf2 net/core/dev.c:6235
[<ffffffff8328656e>] tun_rx_batched.isra.0+0x430/0x686 drivers/net/tun.c:1485
[<ffffffff8329ed3a>] tun_get_user+0x2952/0x3d6c drivers/net/tun.c:1938
[<ffffffff832a21e0>] tun_chr_write_iter+0xc4/0x21c drivers/net/tun.c:1984
[<ffffffff80b9b9ae>] new_sync_write fs/read_write.c:593 [inline]
[<ffffffff80b9b9ae>] vfs_write+0x56c/0xa9a fs/read_write.c:686
[<ffffffff80b9c2be>] ksys_write+0x126/0x228 fs/read_write.c:738
[<ffffffff80b9c42e>] __do_sys_write fs/read_write.c:749 [inline]
[<ffffffff80b9c42e>] __se_sys_write fs/read_write.c:746 [inline]
[<ffffffff80b9c42e>] __riscv_sys_write+0x6e/0x94 fs/read_write.c:746
[<ffffffff80076912>] syscall_handler+0x94/0x118 arch/riscv/include/asm/syscall.h:112
[<ffffffff8637e31e>] do_trap_ecall_u+0x396/0x530 arch/riscv/kernel/traps.c:341
[<ffffffff863a69e2>] handle_exception+0x146/0x152 arch/riscv/kernel/entry.S:197
Fixes: fa76c1674f2e ("ipv6: Move some validation from ip6_route_info_create() to rtm_to_fib6_config().")
Reported-by: syzbot+4c2358694722d304c44e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6849b8c3.a00a0220.1eb5f5.00f0.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611193551.2999991-1-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdevsim supports netpoll. Make sure we don't call napi_complete()
from it, since it may not be scheduled. Breno reports hitting a
warning in napi_complete_done():
WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560
__napi_poll+0x2d8/0x3a0
handle_softirqs+0x1fe/0x710
This is presumably after netpoll stole the SCHED bit prematurely.
Reported-by: Breno Leitao <leitao@debian.org>
Fixes: 3762ec05a9fb ("netdevsim: add NAPI support")
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250611174643.2769263-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check for if ida_alloc() or rhashtable_lookup_get_insert_fast() fails.
Fixes: 17e0accac577 ("net/mlx5: HWS, support complex matchers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Link: https://patch.msgid.link/aEmBONjyiF6z5yCV@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The veth peer device is RCU protected, but when the peer device gets
deleted (veth_dellink) then the pointer is assigned NULL (via
RCU_INIT_POINTER).
This patch adds a necessary NULL check in veth_xdp_rcv when accessing
the veth peer net_device.
This fixes a bug introduced in commit dc82a33297fc ("veth: apply qdisc
backpressure on full ptr_ring to reduce TX drops"). The bug is a race
and only triggers when having inflight packets on a veth that is being
deleted.
Reported-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Closes: https://lore.kernel.org/all/fecfcad0-7a16-42b8-bff2-66ee83a6e5c4@linux.dev/
Reported-by: syzbot+c4c7bf27f6b0c4bd97fe@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/683da55e.a00a0220.d8eae.0052.GAE@google.com/
Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops")
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://patch.msgid.link/174964557873.519608.10855046105237280978.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This function is no longer used after the four prior fixes.
Given all prior uses were wrong, it seems better to remove it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gerrard Tai reported a race condition in ETS, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gerrard Tai reported a race condition in TBF, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://patch.msgid.link/20250611111515.1983366-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gerrard Tai reported a race condition in RED, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: 0c8d13ac9607 ("net: sched: red: delay destroying child qdisc on replace")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gerrard Tai reported a race condition in PRIO, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: 7b8e0b6e6599 ("net: sched: prio: delay destroying child qdiscs on change")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250611111515.1983366-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gerrard Tai reported that SFQ perturb_period has no range check yet,
and this can be used to trigger a race condition fixed in a separate patch.
We want to make sure ctl->perturb_period * HZ will not overflow
and is positive.
Tested:
tc qd add dev lo root sfq perturb -10 # negative value : error
Error: sch_sfq: invalid perturb period.
tc qd add dev lo root sfq perturb 1000000000 # too big : error
Error: sch_sfq: invalid perturb period.
tc qd add dev lo root sfq perturb 2000000 # acceptable value
tc -s -d qd sh dev lo
qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250611083501.1810459-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When performing a non-exact phy_caps lookup, we are looking for a
supported mode that matches as closely as possible the passed speed/duplex.
Blamed patch broke that logic by returning a match too early in case
the caller asks for half-duplex, as a full-duplex linkmode may match
first, and returned as a non-exact match without even trying to mach on
half-duplex modes.
Reported-by: Jijie Shao <shaojijie@huawei.com>
Closes: https://lore.kernel.org/netdev/20250603102500.4ec743cf@fedora/T/#m22ed60ca635c67dc7d9cbb47e8995b2beb5c1576
Tested-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Fixes: fc81e257d19f ("net: phy: phy_caps: Allow looking-up link caps based on speed and duplex")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250606094321.483602-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only let userspace pass the same addresses that were used in KVM_SET_USER_MEMORY_REGION
(or KVM_SET_USER_MEMORY_REGION2); gpas in the the upper half of the address space
are an implementation detail of TDX and KVM.
Extracted from a patch by Sean Christopherson <seanjc@google.com>.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Bug[*] reported for TDX case when enabling KVM_PRE_FAULT_MEMORY in QEMU.
It turns out that @gpa passed to kvm_mmu_do_page_fault() doesn't have
shared bit set when the memory attribute of it is shared, and it leads
to wrong root in tdp_mmu_get_root_for_fault().
Fix it by embedding the direct bits in the gpa that is passed to
kvm_tdp_map_page(), when the memory of the gpa is not private.
[*] https://lore.kernel.org/qemu-devel/4a757796-11c2-47f1-ae0d-335626e818fd@intel.com/
Reported-by: Xiaoyao Li <xiaoyao.li@intel.com>
Closes: https://lore.kernel.org/qemu-devel/4a757796-11c2-47f1-ae0d-335626e818fd@intel.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250611001018.2179964-1-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We normally can't create a new directory with the case-insensitive
option already set - except when we're creating a snapshot.
And if casefolding is enabled filesystem wide, we should still set it
even though not strictly required, for consistency.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, we only ever logged the filesystem UUID.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We have to be able to print superblock sections even if they fail to
validate (for debugging), so we have to calculate the number of entries
from the field size.
Reported-by: syzbot+5138f00559ffb3cb3610@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It seems btree node scan picked up a partially overwritten btree node,
and corrected the "bset version older than sb version_min" error -
resulting in an invalid superblock with a bad version_min field.
Don't run this check at all when we're in btree node scan, and when we
do run it, do something saner if the bset version is totally crazy.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Multiple ioctl handlers individually use a lot of stack space, and clang chooses
to inline them into the bch2_fs_ioctl() function, blowing through the warning
limit:
fs/bcachefs/chardev.c:655:6: error: stack frame size (1032) exceeds limit (1024) in 'bch2_fs_ioctl' [-Werror,-Wframe-larger-than]
655 | long bch2_fs_ioctl(struct bch_fs *c, unsigned cmd, void __user *arg)
By marking the largest two of them as noinline_for_stack, no indidual code path
ends up using this much, which avoids the warning and reduces the possible
total stack usage in the ioctl handler.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
fsck_err() can return a transaction restart if passed a transaction
object - this has always been true when it has to drop locks to prompt
for user input, but we're seeing this more now that we're logging the
error being corrected in the journal.
gc_accounting_done() doesn't call fsck_err() from an actual commit loop,
and it doesn't need to be holding btree locks when it calls fsck_err(),
so the easy fix here for the unhandled transaction restart is to just
not pass it the transaction object. We'll miss out on the fancy new
logging, but that's ok.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix a small leak of the superblock 'clean' section.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
PREEMPT_RT redefines how standard spinlocks work, so local_irq_save() +
spin_lock() is no longer equivalent to spin_lock_irqsave(). Fortunately,
we don't strictly need to do it that way.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix a UAF: we were calling darray_make_room() and retaining a pointer to
the old buffer.
And fix an UBSAN warning: struct bch_sb_field_downgrade_entry uses
__counted_by, so set dst->nr_errors before assigning to the array entry.
Reported-by: syzbot+14c52d86ddbd89bea13e@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Object debugging generally needs special provisions for putting said
objects on the stack, which rhashtable does not have.
Reported-by: syzbot+bcc38a9556d0324c2ec2@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we think we're read-only but the VFS doesn't, fun will ensue.
And now that we know we have to be able to do this safely, just make
nochanges imply ro.
Reported-by: syzbot+a7d6ceaba099cc21dee4@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Link: https://lore.kernel.org/all/6822ab02.050a0220.f2294.00cb.GAE@google.com/T/
Reported-by: syzbot+2c3ef91c9523c3d1a25c@syzkaller.appspotmail.com
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_btree_lost_data() gets called on btree node read error, but the
error might be transient.
btree_node_scan is expensive, and there's no need to run it persistently
(marking it in the superblock as required to run) - check_topology
will run it if required, via bch2_get_scanned_nodes().
Running it non-persistently is fine, to avoid check_topology having to
rewind recovery to run it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_btree_increase_depth() was originally for disaster recovery, to get
some data back from the journal when a btree root was bad.
We don't need it for that purpose anymore; on bad btree root we'll
launch btree node scan and reconstruct all the interior nodes.
If there's a key in the journal for a depth that doesn't exists, and
it's not from check_topology/btree node scan, we should just ignore it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Invalidate pagecache after we write the new superblock and send a
uevent.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It seems excessive forced btree node rewrites can cause interior btree
updates to become wedged during recovery, before we're using the write
buffer for backpointer updates.
Add more flags so we can determine where these are coming from.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We had a deadlock during recovery where interior btree updates became
wedged and all open_buckets were consumed; start adding more
introspection.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Log the specific error being corrected in the journal when we're
repairing, this helps greatly with 'bcachefs list_journal' analysis.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The next patch will add logging of the specific error being corrected in
repair paths to the journal; this means __bch2_fsck_err() can return
transaction restarts in places that previously weren't expecting them.
check_topology() is old code that doesn't use btree iterators for btree
node locking - it'll have to be rewritten in the future to work online.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
I left Amazon and joined Google, so let's map the email
addresses accordingly.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250610235734.88540-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simple test for crash involving multicast loopback and stale dst.
Reuse exising NAT46 program.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610001245.1981782-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A not-so-careful NAT46 BPF program can crash the kernel
if it indiscriminately flips ingress packets from v4 to v6:
BUG: kernel NULL pointer dereference, address: 0000000000000000
ip6_rcv_core (net/ipv6/ip6_input.c:190:20)
ipv6_rcv (net/ipv6/ip6_input.c:306:8)
process_backlog (net/core/dev.c:6186:4)
napi_poll (net/core/dev.c:6906:9)
net_rx_action (net/core/dev.c:7028:13)
do_softirq (kernel/softirq.c:462:3)
netif_rx (net/core/dev.c:5326:3)
dev_loopback_xmit (net/core/dev.c:4015:2)
ip_mc_finish_output (net/ipv4/ip_output.c:363:8)
NF_HOOK (./include/linux/netfilter.h:314:9)
ip_mc_output (net/ipv4/ip_output.c:400:5)
dst_output (./include/net/dst.h:459:9)
ip_local_out (net/ipv4/ip_output.c:130:9)
ip_send_skb (net/ipv4/ip_output.c:1496:8)
udp_send_skb (net/ipv4/udp.c:1040:8)
udp_sendmsg (net/ipv4/udp.c:1328:10)
The output interface has a 4->6 program attached at ingress.
We try to loop the multicast skb back to the sending socket.
Ingress BPF runs as part of netif_rx(), pushes a valid v6 hdr
and changes skb->protocol to v6. We enter ip6_rcv_core which
tries to use skb_dst(). But the dst is still an IPv4 one left
after IPv4 mcast output.
Clear the dst in all BPF helpers which change the protocol.
Try to preserve metadata dsts, those may carry non-routing
metadata.
Cc: stable@vger.kernel.org
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: d219df60a70e ("bpf: Add ipip6 and ip6ip decap support for bpf_skb_adjust_room()")
Fixes: 1b00e0dfe7d0 ("bpf: update skb->protocol in bpf_skb_net_grow")
Fixes: 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610001245.1981782-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make pte_swp_exclusive return bool instead of int. This will better
reflect how pte_swp_exclusive is actually used in the code.
This fixes swap/swapoff problems on Alpha due pte_swp_exclusive not
returning correct values when _PAGE_SWP_EXCLUSIVE bit resides in upper
32-bits of PTE (like on alpha).
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/lkml/20250218175735.19882-2-linmag7@gmail.com/
Link: https://lore.kernel.org/lkml/20250602041118.GA2675383@ZenIV/
[ Applied as the 'sed' script Al suggested - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When the link is up, either eth_proto_oper or ext_eth_proto_oper
typically reports the active link protocol, from which both speed
and number of lanes can be retrieved. However, in certain cases,
such as when a NIC is connected via a non-standard cable, the
firmware may not report the protocol.
In such scenarios, the speed can still be obtained from the
data_rate_oper field in PTYS register. Since data_rate_oper
provides only speed information and lacks lane details, it is
incorrect to derive the number of lanes from it.
This patch corrects the behavior by setting the number of lanes to
UNKNOWN instead of incorrectly using MAX_LANES when relying on
data_rate_oper.
Fixes: 7e959797f021 ("net/mlx5e: Enable lanes configuration when auto-negotiation is off")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, a unique tunnel id was added for the matching on TC
non-zero chains, to support inner header rewrite with goto action.
Later, it was used to support VF tunnel offload for vxlan, then for
Geneve and GRE. To support VF tunnel, a temporary mlx5_flow_spec is
used to parse tunnel options. For Geneve, if there is TLV option, a
object is created, or refcnt is added if already exists. But the
temporary mlx5_flow_spec is directly freed after parsing, which causes
the leak because no information regarding the object is saved in
flow's mlx5_flow_spec, which is used to free the object when deleting
the flow.
To fix the leak, call mlx5_geneve_tlv_option_del() before free the
temporary spec if it has TLV object.
Fixes: 521933cdc4aa ("net/mlx5e: Support Geneve and GRE with VF tunnel offload")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When there are more than one destinations, we create a FW flow
table and provide it with all the destinations. FW requires to
have wire as the last destination in the list (if it exists),
otherwise the operation fails with FW syndrome.
This patch fixes the destination array action creation: if it
contains a wire destination, it is moved to the end.
Fixes: 504e536d9010 ("net/mlx5: HWS, added actions handling")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-7-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix missing field handling in definer - outer IP version.
Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The newly introduced mutex is only used for reformat actions, but it was
initialized for modify header instead.
The struct that contains the mutex is zero-initialized and an all-zero
mutex is valid, so the issue only shows up with CONFIG_DEBUG_MUTEXES.
Fixes: b206d9ec19df ("net/mlx5: HWS, register reformat actions with fw")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When attempting to add a rule to an existing flow group, if a matching
flow group exists but is not active, the error code returned should be
EAGAIN, so that the rule can be added to the matching flow group once
it is active, rather than ENOENT, which indicates that no matching
flow group was found.
Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix shutdown flow UAF when a virtual function is created on the embedded
chip (ECVF) of a BlueField device. In such case the vport acl ingress
table is not properly destroyed.
ECVF functionality is independent of ecpf_vport_exists capability and
thus functions mlx5_eswitch_(enable|disable)_pf_vf_vports() should not
test it when enabling/disabling ECVF vports.
kernel log:
[] refcount_t: underflow; use-after-free.
[] WARNING: CPU: 3 PID: 1 at lib/refcount.c:28
refcount_warn_saturate+0x124/0x220
----------------
[] Call trace:
[] refcount_warn_saturate+0x124/0x220
[] tree_put_node+0x164/0x1e0 [mlx5_core]
[] mlx5_destroy_flow_table+0x98/0x2c0 [mlx5_core]
[] esw_acl_ingress_table_destroy+0x28/0x40 [mlx5_core]
[] esw_acl_ingress_lgcy_cleanup+0x80/0xf4 [mlx5_core]
[] esw_legacy_vport_acl_cleanup+0x44/0x60 [mlx5_core]
[] esw_vport_cleanup+0x64/0x90 [mlx5_core]
[] mlx5_esw_vport_disable+0xc0/0x1d0 [mlx5_core]
[] mlx5_eswitch_unload_ec_vf_vports+0xcc/0x150 [mlx5_core]
[] mlx5_eswitch_disable_sriov+0x198/0x2a0 [mlx5_core]
[] mlx5_device_disable_sriov+0xb8/0x1e0 [mlx5_core]
[] mlx5_sriov_detach+0x40/0x50 [mlx5_core]
[] mlx5_unload+0x40/0xc4 [mlx5_core]
[] mlx5_unload_one_devl_locked+0x6c/0xe4 [mlx5_core]
[] mlx5_unload_one+0x3c/0x60 [mlx5_core]
[] shutdown+0x7c/0xa4 [mlx5_core]
[] pci_device_shutdown+0x3c/0xa0
[] device_shutdown+0x170/0x340
[] __do_sys_reboot+0x1f4/0x2a0
[] __arm64_sys_reboot+0x2c/0x40
[] invoke_syscall+0x78/0x100
[] el0_svc_common.constprop.0+0x54/0x184
[] do_el0_svc+0x30/0xac
[] el0_svc+0x48/0x160
[] el0t_64_sync_handler+0xa4/0x12c
[] el0t_64_sync+0x1a4/0x1a8
[] --[ end trace 9c4601d68c70030e ]---
Fixes: a7719b29a821 ("net/mlx5: Add management of EC VF vports")
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|