aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-10-19drm/amdgpu/gfx8: set TC_WB_ACTION_EN in RELEASE_MEM packetAlex Deucher1-0/+1
This is the recommended setting from the hw team for newer versions of the firmware. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-10-15drm/radeon: Use rdev->gem.mutex to protect hyperz/cmask ownersDaniel Vetter1-2/+8
This removes the last depency of radeon for dev->struct_mutex! Also the locking scheme for hyperz/cmask owners seems a bit unsound, there's no protection in the preclose handler (and that never did hold dev->struct_mutex while being called). So grab the same lock there, too. There's also all the checks in the cs checker, but since the overall design seems to never stall for the previous owner I figured it's ok if I leave this racy. It was racy even before I touched it after all too. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu: fix lockup when clean pending fencesJunwei Zhang1-3/+3
The first lockup fence will lock the fence list of scheduler. Then cancel the delayed workqueues for all clean pending fences without waiting the workqueues to finish. Change-Id: I9bec826de1aa49d587b0662f3fb4a95333979429 Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-10-14drm/amdgpu: add timer to fence to detect scheduler lockupJunwei Zhang3-3/+61
Change-Id: I67e987db0efdca28faa80b332b75571192130d33 Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: David Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-10-14drm/amdgpu: add VM CS mapping trace pointChristian König2-1/+19
Output all VM mappings a command submission uses. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu: add option to clear VM page tables after every submitChristian König3-1/+21
This makes it much easier to find when userspace misses to send some buffers. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu: add option to stop on VM faultChristian König4-6/+80
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu: only print meaningful VM faultsChristian König2-4/+12
Port of radeon commit 9b7d786b900baf7c0d1a7e211570aef1cb27590f. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu: also trace already allocated VMIDsChristian König1-1/+3
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu: Drop unnecessary #include <linux/vga_switcheroo.h>Lukas Wunner2-2/+0
This was added to two radeon files even though they don't use any vga_switcheroo symbols, the amdgpu fork inherited them: Added to amdgpu_acpi.c by commit d7a2952f1ade ("drm/radeon: Add support for the ATIF ACPI method to the radeon driver"). Added to amdgpu_bios.c by commit 6a9ee8af344e ("vga_switcheroo: initial implementation (v15)"). Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/radeon: Drop unnecessary #include <linux/vga_switcheroo.h>Lukas Wunner3-3/+0
This was added to three files even though they don't use any vga_switcheroo symbols: Added to radeon_acpi.c by commit d7a2952f1ade ("drm/radeon: Add support for the ATIF ACPI method to the radeon driver"). Added to radeon_asic.c by commit 0a10c85129c2 ("drm/radeon: create radeon_asic.c"). Added to radeon_bios.c by commit 6a9ee8af344e ("vga_switcheroo: initial implementation (v15)"). Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu: clean up pageflip interrupt handlingAlex Deucher3-159/+51
Check to make sure we aren't touching a non-existent display controller and simplify the code. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu: rework sdma structuresAlex Deucher9-258/+245
Rework the sdma structures in the driver to consolidate all of the sdma info into a single structure and allow for asics that may have different numbers of sdma instances. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu: unpin cursor BOs on suspend and pin them again on resumeAlex Deucher1-1/+30
Everything is evicted from VRAM before suspend, so we need to make sure all BOs are unpinned and re-pinned after resume. Fixes broken mouse cursor after resume introduced by commit b9729b17. Port of radeon commit: f3cbb17bcf676a2fc6aedebe9fbebd59e550c51a Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce8: Fold set_cursor() into show_cursor()Alex Deucher1-13/+5
Port of radeon commit: 8991668ab4e26f985a8485719bce5d6d0623a644 Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce8: Clean up reference counting and pinning of the cursor BOsAlex Deucher1-37/+24
Take a GEM reference for and pin the new cursor BO, unpin and drop the GEM reference for the old cursor BO in dce8 crtc_cursor_set2, and use amdgpu_crtc->cursor_addr in dce8 set_cursor. This fixes dce8 cursor_reset accidentally incrementing the cursor BO pin count, and cleans up the code a little. Port of radeon commit: cd404af0c930104462aa91344f07d002cf8248ed Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce8: Move hotspot handling out of set_cursorAlex Deucher1-19/+17
It's only needed in dce8 crtc_cursor_set2. Port of radeon commit: 2e007e611bc0a46dfed1547e0228a57f800e703d Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce8: Re-show the cursor after a modeset (v2)Alex Deucher1-24/+57
Setting a mode seems to clear the cursor registers, so we need to re-program them to make sure the cursor is visible. Port of radeon commit: 6d3759fac636028849f3bbec80c4b77e9bfdb1d2 v2: change radeon reference in error message Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce8: Use cursor_set2 hook for enabling / disabling the HW cursorAlex Deucher1-23/+51
The cursor_set2 hook provides the cursor hotspot position within the cursor image. When the hotspot position changes, we can adjust the cursor position such that the hotspot doesn't move on the screen. This prevents the cursor from appearing to intermittently jump around on the screen when the position of the hotspot within the cursor image changes. Port of radeon commits: 78b1a6010b46a69bcd47b723a80f92693f26d17b 3feba08d79c32777a845c3c8a4ab93092bdf6f19 Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce11: Fold set_cursor() into show_cursor()Alex Deucher1-13/+5
Port of radeon commit: 8991668ab4e26f985a8485719bce5d6d0623a644 Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce11: Clean up reference counting and pinning of the cursor BOsAlex Deucher1-37/+24
Take a GEM reference for and pin the new cursor BO, unpin and drop the GEM reference for the old cursor BO in dce11 crtc_cursor_set2, and use amdgpu_crtc->cursor_addr in dce11 set_cursor. This fixes dce11 cursor_reset accidentally incrementing the cursor BO pin count, and cleans up the code a little. Port of radeon commit: cd404af0c930104462aa91344f07d002cf8248ed Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce11: Move hotspot handling out of set_cursorAlex Deucher1-19/+17
It's only needed in dce11 crtc_cursor_set2. Port of radeon commit: 2e007e611bc0a46dfed1547e0228a57f800e703d Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce11: Re-show the cursor after a modeset (v2)Alex Deucher1-24/+57
Setting a mode seems to clear the cursor registers, so we need to re-program them to make sure the cursor is visible. Port of radeon commit: 6d3759fac636028849f3bbec80c4b77e9bfdb1d2 v2: change radeon reference in error output Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce11: Use cursor_set2 hook for enabling / disabling the HW cursorAlex Deucher1-23/+51
The cursor_set2 hook provides the cursor hotspot position within the cursor image. When the hotspot position changes, we can adjust the cursor position such that the hotspot doesn't move on the screen. This prevents the cursor from appearing to intermittently jump around on the screen when the position of the hotspot within the cursor image changes. Port of radeon commits: 78b1a6010b46a69bcd47b723a80f92693f26d17b 3feba08d79c32777a845c3c8a4ab93092bdf6f19 Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce10: Fold set_cursor() into show_cursor()Alex Deucher1-13/+5
Port of radeon commit: 8991668ab4e26f985a8485719bce5d6d0623a644 Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce10: Clean up reference counting and pinning of the cursor BOsAlex Deucher1-37/+24
Take a GEM reference for and pin the new cursor BO, unpin and drop the GEM reference for the old cursor BO in dce10 crtc_cursor_set2, and use amdgpu_crtc->cursor_addr in dce10 set_cursor. This fixes dce10 cursor_reset accidentally incrementing the cursor BO pin count, and cleans up the code a little. Port of radeon commit: cd404af0c930104462aa91344f07d002cf8248ed Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce10: Move hotspot handling out of set_cursorAlex Deucher1-19/+17
It's only needed in dce10 crtc_cursor_set2. Port of radeon commit: 2e007e611bc0a46dfed1547e0228a57f800e703d Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce10: Re-show the cursor after a modeset (v2)Alex Deucher1-24/+57
Setting a mode seems to clear the cursor registers, so we need to re-program them to make sure the cursor is visible. Port of radeon commit: 6d3759fac636028849f3bbec80c4b77e9bfdb1d2 v2: change radeon reference in error message Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/dce10: Use cursor_set2 hook for enabling / disabling the HW cursorAlex Deucher2-23/+55
The cursor_set2 hook provides the cursor hotspot position within the cursor image. When the hotspot position changes, we can adjust the cursor position such that the hotspot doesn't move on the screen. This prevents the cursor from appearing to intermittently jump around on the screen when the position of the hotspot within the cursor image changes. Port of radeon commits: 78b1a6010b46a69bcd47b723a80f92693f26d17b 3feba08d79c32777a845c3c8a4ab93092bdf6f19 Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/atom: add support for new div32 opcodes (v3)Alex Deucher2-2/+25
Better precision than the regular div opcode. v2: drop 64 bit divide v3: fix op handling. This actually is a 64 bit divide. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/atom: add support for new mul32 opcodes (v2)Alex Deucher2-2/+18
Better precision than the regular mul opcode. v2: handle big endian properly. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/atom: add support for process ds opcodeAlex Deucher1-1/+10
Just skips a data section. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-14drm/amdgpu/atom: implement debug opcodeAlex Deucher1-1/+2
Basically a nop. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-07drm/amdgpu: disable hw semaphores by defaultAlex Deucher1-2/+2
These are buggy on some asics and not really used anymore now that the GPU schedular is enabled. Change-Id: I67182b409d64de308392a15d1a0a15018071dc0b Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-07drm/amdgpu: enable scheduler by defaultChunming Zhou1-2/+2
Change-Id: Idce64f63e8422324996fc5d583d0bc9a5ac60d0c Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-10-07drm/amdgpu: add TOPDOWN flag to the whole vramChunming Zhou1-0/+2
need to decrease visible vram usage by default. Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: monk.liu <monk.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-10-07drm/amdgpu: add vram usage into debugfsChunming Zhou1-0/+5
Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-10-07drm/amdgpu: split gfx8 gpu init into sw and hw partsAlex Deucher1-190/+197
Calculate the driver state in sw_init and program the registers in hw init. Acked-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-02drm/radeon: remove volatile qualifierGrazvydas Ignotas1-3/+3
There doesn't seem to be any need to have 'ib' volatile, the code is not even consistent with it and some places already miss it. As it is now it's just making gcc produce worse code. If there are special requirements for that memory, then proper primitives like memory barriers or accessor functions should be used, but it doesn't look like that is needed here. While at it, change the type to match the one in radeon_ib structure. Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-02drm/radeon: refactor register check loopGrazvydas Ignotas1-6/+4
After this patch the register check loop does the same thing as before, except that now gcc does better job optimizing it: it now sees that end_reg was already checked against PACKET3_SET_CONTEXT_REG_END and can optimize REG_SAFE_BM_SIZE comparison out of evergreen_is_safe_reg() as (PACKET3_SET_CONTEXT_REG_END >> 7) < REG_SAFE_BM_SIZE. Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-02drm/radeon: split evergreen_cs_check_regGrazvydas Ignotas1-22/+27
evergreen_cs_check_reg() is a large function and gcc doesn't want to inline it. It has a quick check for reg_safe_bm[] to see if register needs special handling, which often results in early exit. However because the function is large, it has a long prologue/epilogue to save/restore all the callee-save registers which according to perf is taking significant amount of time. To avoid this, we can reuse evergreen_is_safe_reg() to do the early check directly in register loop. Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-02drm/radeon: simplify register checkerGrazvydas Ignotas1-31/+18
To avoid having to distinguish between CAYMAN or older on every register check, place a pointer in evergreen_cs_track and use it unconditionally. Also make use of the fact that both reg_safe_bm[] arrays are of the same length to remove another CAYMAN check. Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-02drm/amdgpu: Spell vga_switcheroo consistentlyLukas Wunner3-3/+3
Currently everyone and their dog has their own favourite spelling for vga_switcheroo. This makes it hard to grep dmesg for log entries relating to vga_switcheroo. It also makes it hard to find related source files in the tree. vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-02drm/radeon: Spell vga_switcheroo consistentlyLukas Wunner3-3/+3
Currently everyone and their dog has their own favourite spelling for vga_switcheroo. This makes it hard to grep dmesg for log entries relating to vga_switcheroo. It also makes it hard to find related source files in the tree. vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-09-27Linux 4.3-rc3Linus Torvalds1-1/+1
2015-09-25net: Fix panic in icmp_route_lookupDavid Ahern1-2/+2
Andrey reported a panic: [ 7249.865507] BUG: unable to handle kernel pointer dereference at 000000b4 [ 7249.865559] IP: [<c16afeca>] icmp_route_lookup+0xaa/0x320 [ 7249.865598] *pdpt = 0000000030f7f001 *pde = 0000000000000000 [ 7249.865637] Oops: 0000 [#1] ... [ 7249.866811] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.3.0-999-generic #201509220155 [ 7249.866876] Hardware name: MSI MS-7250/MS-7250, BIOS 080014 08/02/2006 [ 7249.866916] task: c1a5ab00 ti: c1a52000 task.ti: c1a52000 [ 7249.866949] EIP: 0060:[<c16afeca>] EFLAGS: 00210246 CPU: 0 [ 7249.866981] EIP is at icmp_route_lookup+0xaa/0x320 [ 7249.867012] EAX: 00000000 EBX: f483ba48 ECX: 00000000 EDX: f2e18a00 [ 7249.867045] ESI: 000000c0 EDI: f483ba70 EBP: f483b9ec ESP: f483b974 [ 7249.867077] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 7249.867108] CR0: 8005003b CR2: 000000b4 CR3: 36ee07c0 CR4: 000006f0 [ 7249.867141] Stack: [ 7249.867165] 320310ee 00000000 00000042 320310ee 00000000 c1aeca00 f3920240 f0c69180 [ 7249.867268] f483ba04 f855058b a89b66cd f483ba44 f8962f4b 00000000 e659266c f483ba54 [ 7249.867361] 8004753c f483ba5c f8962f4b f2031140 000003c1 ffbd8fa0 c16b0e00 00000064 [ 7249.867448] Call Trace: [ 7249.867494] [<f855058b>] ? e1000_xmit_frame+0x87b/0xdc0 [e1000e] [ 7249.867534] [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack] [ 7249.867576] [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack] [ 7249.867615] [<c16b0e00>] ? icmp_send+0xa0/0x380 [ 7249.867648] [<c16b102f>] icmp_send+0x2cf/0x380 [ 7249.867681] [<f89c8126>] nf_send_unreach+0xa6/0xc0 [nf_reject_ipv4] [ 7249.867714] [<f89cd0da>] reject_tg+0x7a/0x9f [ipt_REJECT] [ 7249.867746] [<f88c29a7>] ipt_do_table+0x317/0x70c [ip_tables] [ 7249.867780] [<f895e0a6>] ? __nf_conntrack_find_get+0x166/0x3b0 [nf_conntrack] [ 7249.867838] [<f895eea8>] ? nf_conntrack_in+0x398/0x600 [nf_conntrack] [ 7249.867889] [<f84c0035>] iptable_filter_hook+0x35/0x80 [iptable_filter] [ 7249.867933] [<c16776a1>] nf_iterate+0x71/0x80 [ 7249.867970] [<c1677715>] nf_hook_slow+0x65/0xc0 [ 7249.868002] [<c1681811>] __ip_local_out_sk+0xc1/0xd0 [ 7249.868034] [<c1680f30>] ? ip_forward_options+0x1a0/0x1a0 [ 7249.868066] [<c1681836>] ip_local_out_sk+0x16/0x30 [ 7249.868097] [<c1684054>] ip_send_skb+0x14/0x80 [ 7249.868129] [<c16840f4>] ip_push_pending_frames+0x34/0x40 [ 7249.868163] [<c16844a2>] ip_send_unicast_reply+0x282/0x310 [ 7249.868196] [<c16a0863>] tcp_v4_send_reset+0x1b3/0x380 [ 7249.868227] [<c16a1b63>] tcp_v4_rcv+0x323/0x990 [ 7249.868257] [<c16776a1>] ? nf_iterate+0x71/0x80 [ 7249.868289] [<c167dc2b>] ip_local_deliver_finish+0x8b/0x230 [ 7249.868322] [<c167df4c>] ip_local_deliver+0x4c/0xa0 [ 7249.868353] [<c167dba0>] ? ip_rcv_finish+0x390/0x390 [ 7249.868384] [<c167d88c>] ip_rcv_finish+0x7c/0x390 [ 7249.868415] [<c167e280>] ip_rcv+0x2e0/0x420 ... Prior to the VRF change the oif was not set in the flow struct, so the VRF support should really have only added the vrf_master_ifindex lookup. Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX") Cc: Andrey Melnikov <temnota.am@gmail.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25net: update docbook comment for __mdiobus_register()Russell King1-2/+5
Update the docbook comment for __mdiobus_register() to include the new module owner argument. This resolves a warning found by the 0-day builder. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25MAINTAINERS: remove amd5536udc USB gadget driver maintainerGreg Kroah-Hartman1-2/+1
Thomas can no longer work on the driver, so he asked me to mark the MAINTAINER entry as "Orphan" with the hope that someone else would someday pick it up. Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-25ppp: fix lockdep splat in ppp_dev_uninit()Guillaume Nault1-1/+3
ppp_dev_uninit() locks all_ppp_mutex while under rtnl mutex protection. ppp_create_interface() must then lock these mutexes in that same order to avoid possible deadlock. [ 120.880011] ====================================================== [ 120.880011] [ INFO: possible circular locking dependency detected ] [ 120.880011] 4.2.0 #1 Not tainted [ 120.880011] ------------------------------------------------------- [ 120.880011] ppp-apitest/15827 is trying to acquire lock: [ 120.880011] (&pn->all_ppp_mutex){+.+.+.}, at: [<ffffffffa0145f56>] ppp_dev_uninit+0x64/0xb0 [ppp_generic] [ 120.880011] [ 120.880011] but task is already holding lock: [ 120.880011] (rtnl_mutex){+.+.+.}, at: [<ffffffff812e4255>] rtnl_lock+0x12/0x14 [ 120.880011] [ 120.880011] which lock already depends on the new lock. [ 120.880011] [ 120.880011] [ 120.880011] the existing dependency chain (in reverse order) is: [ 120.880011] [ 120.880011] -> #1 (rtnl_mutex){+.+.+.}: [ 120.880011] [<ffffffff81073a6f>] lock_acquire+0xcf/0x10e [ 120.880011] [<ffffffff813ab18a>] mutex_lock_nested+0x56/0x341 [ 120.880011] [<ffffffff812e4255>] rtnl_lock+0x12/0x14 [ 120.880011] [<ffffffff812d9d94>] register_netdev+0x11/0x27 [ 120.880011] [<ffffffffa0147b17>] ppp_ioctl+0x289/0xc98 [ppp_generic] [ 120.880011] [<ffffffff8113b367>] do_vfs_ioctl+0x4ea/0x532 [ 120.880011] [<ffffffff8113b3fd>] SyS_ioctl+0x4e/0x7d [ 120.880011] [<ffffffff813ad7d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 120.880011] [ 120.880011] -> #0 (&pn->all_ppp_mutex){+.+.+.}: [ 120.880011] [<ffffffff8107334e>] __lock_acquire+0xb07/0xe76 [ 120.880011] [<ffffffff81073a6f>] lock_acquire+0xcf/0x10e [ 120.880011] [<ffffffff813ab18a>] mutex_lock_nested+0x56/0x341 [ 120.880011] [<ffffffffa0145f56>] ppp_dev_uninit+0x64/0xb0 [ppp_generic] [ 120.880011] [<ffffffff812d5263>] rollback_registered_many+0x19e/0x252 [ 120.880011] [<ffffffff812d5381>] rollback_registered+0x29/0x38 [ 120.880011] [<ffffffff812d53fa>] unregister_netdevice_queue+0x6a/0x77 [ 120.880011] [<ffffffffa0146a94>] ppp_release+0x42/0x79 [ppp_generic] [ 120.880011] [<ffffffff8112d9f6>] __fput+0xec/0x192 [ 120.880011] [<ffffffff8112dacc>] ____fput+0x9/0xb [ 120.880011] [<ffffffff8105447a>] task_work_run+0x66/0x80 [ 120.880011] [<ffffffff81001801>] prepare_exit_to_usermode+0x8c/0xa7 [ 120.880011] [<ffffffff81001900>] syscall_return_slowpath+0xe4/0x104 [ 120.880011] [<ffffffff813ad931>] int_ret_from_sys_call+0x25/0x9f [ 120.880011] [ 120.880011] other info that might help us debug this: [ 120.880011] [ 120.880011] Possible unsafe locking scenario: [ 120.880011] [ 120.880011] CPU0 CPU1 [ 120.880011] ---- ---- [ 120.880011] lock(rtnl_mutex); [ 120.880011] lock(&pn->all_ppp_mutex); [ 120.880011] lock(rtnl_mutex); [ 120.880011] lock(&pn->all_ppp_mutex); [ 120.880011] [ 120.880011] *** DEADLOCK *** Fixes: 8cb775bc0a34 ("ppp: fix device unregistration upon netns deletion") Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selectedSudip Mukherjee1-1/+1
The builds of allmodconfig of avr32 is failing with: drivers/net/ethernet/via/via-rhine.c:1098:2: error: implicit declaration of function 'pci_iomap' [-Werror=implicit-function-declaration] drivers/net/ethernet/via/via-rhine.c:1119:2: error: implicit declaration of function 'pci_iounmap' [-Werror=implicit-function-declaration] The generic empty pci_iomap and pci_iounmap is used only if CONFIG_PCI is not defined and CONFIG_GENERIC_PCI_IOMAP is defined. Add GENERIC_PCI_IOMAP in the dependency list for VIA_RHINE as we are getting build failure when CONFIG_PCI and CONFIG_GENERIC_PCI_IOMAP both are not defined. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.