aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-01-23chtls: Fix potential resource leakPan Bian1-4/+3
The dst entry should be released if no neighbour is found. Goto label free_dst to fix the issue. Besides, the check of ndev against NULL is redundant. Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121145738.51091-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: dsa: bcm_sf2: put device node before returnPan Bian1-2/+6
Put the device node dn before return error code on failure path. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121123343.26330-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: mrp: move struct definitions out of uapiRasmus Villemoes2-86/+29
None of these are actually used in the kernel/userspace interface - there's a userspace component of implementing MRP, and userspace will need to construct certain frames to put on the wire, but there's no reason the kernel should provide the relevant definitions in a UAPI header. In fact, some of those definitions were broken until previous commit, so only keep the few that are actually referenced in the kernel code, and move them to the br_private_mrp.h header. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: mrp: fix definitions of MRP test packetsRasmus Villemoes1-2/+2
Wireshark says that the MRP test packets cannot be decoded - and the reason for that is that there's a two-byte hole filled with garbage between the "transitions" and "timestamp" members. So Wireshark decodes the two garbage bytes and the top two bytes of the timestamp written by the kernel as the timestamp value (which thus fluctuates wildly), and interprets the lower two bytes of the timestamp as a new (type, length) pair, which is of course broken. Even though this makes the timestamp field in the struct unaligned, it actually makes it end up on a 32 bit boundary in the frame as mandated by the standard, since it is preceded by a two byte TLV header. The struct definitions live under include/uapi/, but they are not really part of any kernel<->userspace API/ABI, so fixing the definitions by adding the packed attribute should not cause any compatibility issues. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net: fec: put child node on error pathPan Bian1-1/+2
Also decrement the reference count of child device on error path. Fixes: 3e782985cb3c ("net: ethernet: fec: Allow configuration of MDIO bus speed") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210120122037.83897-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net: stmmac: dwmac-intel-plat: remove config data on errorPan Bian1-2/+2
Remove the config data when rate setting fails. Fixes: 9efc9b2b04c7 ("net: stmmac: Add dwmac-intel-plat for GBE driver") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210120110745.36412-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net: octeontx2: Make sure the buffer is 128 byte alignedKevin Hao1-1/+2
The octeontx2 hardware needs the buffer to be 128 byte aligned. But in the current implementation of napi_alloc_frag(), it can't guarantee the return address is 128 byte aligned even the request size is a multiple of 128 bytes, so we have to request an extra 128 bytes and use the PTR_ALIGN() to make sure that the buffer is aligned correctly. Fixes: 7a36e4918e30 ("octeontx2-pf: Use the napi_alloc_frag() to alloc the pool buffers") Reported-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Kevin Hao <haokexin@gmail.com> Tested-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/20210121070906.25380-1-haokexin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem familyGiacinto Cifelli1-0/+1
Bus 003 Device 009: ID 1e2d:006f Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1e2d idProduct 0x006f bcdDevice 0.00 iManufacturer 3 Cinterion Wireless Modules iProduct 2 PLSx3 iSerial 4 fa3c1419 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 303 bNumInterfaces 9 bConfigurationValue 1 iConfiguration 1 Cinterion Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 2 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 3 CDC Union: bMasterInterface 2 bSlaveInterface 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 4 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 5 CDC Union: bMasterInterface 4 bSlaveInterface 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 6 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 7 CDC Union: bMasterInterface 6 bSlaveInterface 7 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 7 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 8 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Cc: stable@vger.kernel.org Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20210120045650.10855-1-gciofono@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: dsa: microchip: Adjust reset release timing to match reference reset circuitMarek Vasut1-1/+1
KSZ8794CNX datasheet section 8.0 RESET CIRCUIT describes recommended circuit for interfacing with CPU/FPGA reset consisting of 10k pullup resistor and 10uF capacitor to ground. This circuit takes ~100 ms to rise enough to release the reset. For maximum supply voltage VDDIO=3.3V VIH=2.0V R=10kR C=10uF that is VDDIO - VIH t = R * C * -ln( ------------- ) = 10000*0.00001*-(-0.93)=0.093 s VDDIO so we need ~95 ms for the reset to really de-assert, and then the original 100us for the switch itself to come out of reset. Simply msleep() for 100 ms which fits the constraint with a bit of extra space. Fixes: 5b797980908a ("net: dsa: microchip: Implement recommended reset timing") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210120030502.617185-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: dsa: microchip: ksz8795: Fix KSZ8794 port map againMarek Vasut2-11/+21
The KSZ8795 switch has 4 external ports {0,1,2,3} and 1 CPU port {4}, so does the KSZ8765. The KSZ8794 seems to be repackaged KSZ8795 with different ID and port 3 not routed out, however the port 3 registers are present in the silicon, so the KSZ8794 switch has 3 external ports {0,1,2} and 1 CPU port {4}. Currently the driver always uses the last port as CPU port, on KSZ8795/KSZ8765 that is port 4 and that is OK, but on KSZ8794 that is port 3 and that is not OK, as it must also be port 4. This patch adjusts the driver such that it always registers a switch with 5 ports total (4 external ports, 1 CPU port), always sets the CPU port to switch port 4, and then configures the external port mask according to the switch model -- 3 ports for KSZ8794 and 4 for KSZ8795/KSZ8765. Fixes: 68a1b676db52 ("net: dsa: microchip: ksz8795: remove superfluous port_cnt assignment") Fixes: 4ce2a984abd8 ("net: dsa: microchip: ksz8795: use phy_port_cnt where possible") Fixes: 241ed719bc98 ("net: dsa: microchip: ksz8795: use port_cnt instead of TOTOAL_PORT_NUM") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210120001045.488506-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20X.509: Fix crash caused by NULL pointerTianjia Zhang1-1/+2
On the following call path, `sig->pkey_algo` is not assigned in asymmetric_key_verify_signature(), which causes runtime crash in public_key_verify_signature(). keyctl_pkey_verify asymmetric_key_verify_signature verify_signature public_key_verify_signature This patch simply check this situation and fixes the crash caused by NULL pointer. Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification") Reported-by: Tobias Markus <tobias@markus-regensburg.de> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Toke Høiland-Jørgensen <toke@redhat.com> Tested-by: João Fonseca <jpedrofonseca@ua.pt> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-20cachefiles: Drop superfluous readpages aops NULL checkTakashi Iwai1-2/+0
After the recent actions to convert readpages aops to readahead, the NULL checks of readpages aops in cachefiles_read_or_alloc_page() may hit falsely. More badly, it's an ASSERT() call, and this panics. Drop the superfluous NULL checks for fixing this regression. [DH: Note that cachefiles never actually used readpages, so this check was never actually necessary] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208883 BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175245 Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-20net: systemport: free dev before on error pathPan Bian1-2/+4
On the error path, it should goto the error handling label to free allocated memory rather than directly return. Fixes: 31bc72d97656 ("net: systemport: fetch and use clock resources") Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210120044423.1704-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: usb: cdc_ncm: don't spew notificationsGrant Grundler2-1/+13
RTL8156 sends notifications about every 32ms. Only display/log notifications when something changes. This issue has been reported by others: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472 https://lkml.org/lkml/2020/8/27/1083 ... [785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd [785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00 [785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN [785962.929954] usb 1-1: Manufacturer: Realtek [785962.929956] usb 1-1: SerialNumber: 000000001 [785962.991755] usbcore: registered new interface driver cdc_ether [785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15 [785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384 [785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384 [785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15 [785963.019211] usbcore: registered new interface driver cdc_ncm [785963.023856] usbcore: registered new interface driver cdc_wdm [785963.025461] usbcore: registered new interface driver cdc_mbim [785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0 [785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected ... This is about 2KB per second and will overwrite all contents of a 1MB dmesg buffer in under 10 minutes rendering them useless for debugging many kernel problems. This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering the majority of those logs useless too. When the link is up (expected state), spew amount is >2x higher: ... [786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink ... Chrome OS cannot support RTL8156 until this is fixed. Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: mscc: ocelot: Fix multicast to the CPU portAlban Bedel1-5/+18
Multicast entries in the MAC table use the high bits of the MAC address to encode the ports that should get the packets. But this port mask does not work for the CPU port, to receive these packets on the CPU port the MAC_CPU_COPY flag must be set. Because of this IPv6 was effectively not working because neighbor solicitations were never received. This was not apparent before commit 9403c158 (net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries) as the IPv6 entries were broken so all incoming IPv6 multicast was then treated as unknown and flooded on all ports. To fix this problem rework the ocelot_mact_learn() to set the MAC_CPU_COPY flag when a multicast entry that target the CPU port is added. For this we have to read back the ports endcoded in the pseudo MAC address by the caller. It is not a very nice design but that avoid changing the callers and should make backporting easier. Signed-off-by: Alban Bedel <alban.bedel@aerq.com> Fixes: 9403c158b872 ("net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries") Link: https://lore.kernel.org/r/20210119140638.203374-1-alban.bedel@aerq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20tcp: Fix potential use-after-free due to double kfree()Kuniyuki Iwashima1-2/+2
Receiving ACK with a valid SYN cookie, cookie_v4_check() allocates struct request_sock and then can allocate inet_rsk(req)->ireq_opt. After that, tcp_v4_syn_recv_sock() allocates struct sock and copies ireq_opt to inet_sk(sk)->inet_opt. Normally, tcp_v4_syn_recv_sock() inserts the full socket into ehash and sets NULL to ireq_opt. Otherwise, tcp_v4_syn_recv_sock() has to reset inet_opt by NULL and free the full socket. The commit 01770a1661657 ("tcp: fix race condition when creating child sockets from syncookies") added a new path, in which more than one cores create full sockets for the same SYN cookie. Currently, the core which loses the race frees the full socket without resetting inet_opt, resulting in that both sock_put() and reqsk_put() call kfree() for the same memory: sock_put sk_free __sk_free sk_destruct __sk_destruct sk->sk_destruct/inet_sock_destruct kfree(rcu_dereference_protected(inet->inet_opt, 1)); reqsk_put reqsk_free __reqsk_free req->rsk_ops->destructor/tcp_v4_reqsk_destructor kfree(rcu_dereference_protected(inet_rsk(req)->ireq_opt, 1)); Calling kmalloc() between the double kfree() can lead to use-after-free, so this patch fixes it by setting NULL to inet_opt before sock_put(). As a side note, this kind of issue does not happen for IPv6. This is because tcp_v6_syn_recv_sock() clones both ipv6_opt and pktopts which correspond to ireq_opt in IPv4. Fixes: 01770a166165 ("tcp: fix race condition when creating child sockets from syncookies") CC: Ricardo Dias <rdias@singlestore.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210118055920.82516-1-kuniyu@amazon.co.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20bpf: Fix signed_{sub,add32}_overflows type handlingDaniel Borkmann1-3/+3
Fix incorrect signed_{sub,add32}_overflows() input types (and a related buggy comment). It looks like this might have slipped in via copy/paste issue, also given prior to 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") the signature of signed_sub_overflows() had s64 a and s64 b as its input args whereas now they are truncated to s32. Thus restore proper types. Also, the case of signed_add32_overflows() is not consistent to signed_sub32_overflows(). Both have s32 as inputs, therefore align the former. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: De4dCr0w <sa516203@mail.ustc.edu.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-01-20can: peak_usb: fix use after free bugsVincent Mailhol1-4/+4
After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the peak_usb_netif_rx_ni(). Reordering the lines solves the issue. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/r/20210120114137.200019-4-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-20can: vxcan: vxcan_xmit: fix use after free bugVincent Mailhol1-2/+4
After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the canfd_frame cfd which aliases skb memory is accessed after the netif_rx_ni(). Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Link: https://lore.kernel.org/r/20210120114137.200019-3-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-20can: dev: can_restart: fix use after free bugVincent Mailhol1-2/+2
After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/r/20210120114137.200019-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-19tcp: fix TCP socket rehash stats mis-accountingYuchung Cheng3-22/+22
The previous commit 32efcc06d2a1 ("tcp: export count for rehash attempts") would mis-account rehashing SNMP and socket stats: a. During handshake of an active open, only counts the first SYN timeout b. After handshake of passive and active open, stop updating after (roughly) TCP_RETRIES1 recurring RTOs c. After the socket aborts, over count timeout_rehash by 1 This patch fixes this by checking the rehash result from sk_rethink_txhash. Fixes: 32efcc06d2a1 ("tcp: export count for rehash attempts") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Link: https://lore.kernel.org/r/20210119192619.1848270-1-ycheng@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net: dsa: b53: fix an off by one in checking "vlan->vid"Dan Carpenter1-1/+1
The > comparison should be >= to prevent accessing one element beyond the end of the dev->vlans[] array in the caller function, b53_vlan_add(). The "dev->vlans" array is allocated in the b53_switch_init() function and it has "dev->num_vlans" elements. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19tcp: do not mess with cloned skbs in tcp_add_backlog()Eric Dumazet1-12/+13
Heiner Kallweit reported that some skbs were sent with the following invalid GSO properties : - gso_size > 0 - gso_type == 0 This was triggerring a WARN_ON_ONCE() in rtl8169_tso_csum_v2. Juerg Haefliger was able to reproduce a similar issue using a lan78xx NIC and a workload mixing TCP incoming traffic and forwarded packets. The problem is that tcp_add_backlog() is writing over gso_segs and gso_size even if the incoming packet will not be coalesced to the backlog tail packet. While skb_try_coalesce() would bail out if tail packet is cloned, this overwriting would lead to corruptions of other packets cooked by lan78xx, sharing a common super-packet. The strategy used by lan78xx is to use a big skb, and split it into all received packets using skb_clone() to avoid copies. The drawback of this strategy is that all the small skb share a common struct skb_shared_info. This patch rewrites TCP gso_size/gso_segs handling to only happen on the tail skb, since skb_try_coalesce() made sure it was not cloned. Fixes: 4f693b55c3d2 ("tcp: implement coalescing on backlog queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Bisected-by: Juerg Haefliger <juergh@canonical.com> Tested-by: Juerg Haefliger <juergh@canonical.com> Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209423 Link: https://lore.kernel.org/r/20210119164900.766957-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19selftests: net: fib_tests: remove duplicate log testHangbin Liu1-1/+0
The previous test added an address with a specified metric and check if correspond route was created. I somehow added two logs for the same test. Remove the duplicated one. Reported-by: Antoine Tenart <atenart@redhat.com> Fixes: 0d29169a708b ("selftests/net/fib_tests: update addr_metric_test for peer route testing") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210119025930.2810532-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net: nfc: nci: fix the wrong NCI_CORE_INIT parametersBongsu Jeon1-1/+1
Fix the code because NCI_CORE_INIT_CMD includes two parameters in NCI2.0 but there is no parameters in NCI1.x. Fixes: bcd684aace34 ("net/nfc/nci: Support NCI 2.x initial sequence") Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Link: https://lore.kernel.org/r/20210118205522.317087-1-bongsu.jeon@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19sh_eth: Fix power down vs. is_opened flag orderingGeert Uytterhoeven1-2/+2
sh_eth_close() does a synchronous power down of the device before marking it closed. Revert the order, to make sure the device is never marked opened while suspended. While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as there is no reason to do a synchronous power down. Fixes: 7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabledTariq Toukan2-0/+8
With NETIF_F_HW_TLS_RX packets are decrypted in HW. This cannot be logically done when RXCSUM offload is off. Fixes: 14136564c8ee ("net: Add TLS RX offload feature") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Link: https://lore.kernel.org/r/20210117151538.9411-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19netfilter: rpfilter: mask ecn bits before fib lookupGuillaume Nault1-1/+1
RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt() treats Not-ECT or ECT(1) packets in a different way than those with ECT(0) or CE. Reproducer: Create two netns, connected with a veth: $ ip netns add ns0 $ ip netns add ns1 $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1 $ ip -netns ns0 link set dev veth01 up $ ip -netns ns1 link set dev veth10 up $ ip -netns ns0 address add 192.0.2.10/32 dev veth01 $ ip -netns ns1 address add 192.0.2.11/32 dev veth10 Add a route to ns1 in ns0: $ ip -netns ns0 route add 192.0.2.11/32 dev veth01 In ns1, only packets with TOS 4 can be routed to ns0: $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10 Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS is 4: $ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT ... 0% packet loss ... $ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1) ... 0% packet loss ... $ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0) ... 0% packet loss ... $ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE ... 0% packet loss ... Now use iptable's rpfilter module in ns1: $ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP Not-ECT and ECT(1) packets still pass: $ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT ... 0% packet loss ... $ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1) ... 0% packet loss ... But ECT(0) and ECN packets are dropped: $ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0) ... 100% packet loss ... $ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE ... 100% packet loss ... After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore. Fixes: 8f97339d3feb ("netfilter: add ipv4 reverse path filter match") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19udp: mask TOS bits in udp_v4_early_demux()Guillaume Nault1-1/+2
udp_v4_early_demux() is the only function that calls ip_mc_validate_source() with a TOS that hasn't been masked with IPTOS_RT_MASK. This results in different behaviours for incoming multicast UDPv4 packets, depending on if ip_mc_validate_source() is called from the early-demux path (udp_v4_early_demux) or from the regular input path (ip_route_input_noref). ECN would normally not be used with UDP multicast packets, so the practical consequences should be limited on that side. However, IPTOS_RT_MASK is used to also masks the TOS' high order bits, to align with the non-early-demux path behaviour. Reproducer: Setup two netns, connected with veth: $ ip netns add ns0 $ ip netns add ns1 $ ip -netns ns0 link set dev lo up $ ip -netns ns1 link set dev lo up $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1 $ ip -netns ns0 link set dev veth01 up $ ip -netns ns1 link set dev veth10 up $ ip -netns ns0 address add 192.0.2.10 peer 192.0.2.11/32 dev veth01 $ ip -netns ns1 address add 192.0.2.11 peer 192.0.2.10/32 dev veth10 In ns0, add route to multicast address 224.0.2.0/24 using source address 198.51.100.10: $ ip -netns ns0 address add 198.51.100.10/32 dev lo $ ip -netns ns0 route add 224.0.2.0/24 dev veth01 src 198.51.100.10 In ns1, define route to 198.51.100.10, only for packets with TOS 4: $ ip -netns ns1 route add 198.51.100.10/32 tos 4 dev veth10 Also activate rp_filter in ns1, so that incoming packets not matching the above route get dropped: $ ip netns exec ns1 sysctl -wq net.ipv4.conf.veth10.rp_filter=1 Now try to receive packets on 224.0.2.11: $ ip netns exec ns1 socat UDP-RECVFROM:1111,ip-add-membership=224.0.2.11:veth10,ignoreeof - In ns0, send packet to 224.0.2.11 with TOS 4 and ECT(0) (that is, tos 6 for socat): $ echo test0 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6 The "test0" message is properly received by socat in ns1, because early-demux has no cached dst to use, so source address validation is done by ip_route_input_mc(), which receives a TOS that has the ECN bits masked. Now send another packet to 224.0.2.11, still with TOS 4 and ECT(0): $ echo test1 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6 The "test1" message isn't received by socat in ns1, because, now, early-demux has a cached dst to use and calls ip_mc_validate_source() immediately, without masking the ECN bits. Fixes: bc044e8db796 ("udp: perform source validation for mcast early demux") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19xsk: Clear pool even for inactive queuesMaxim Mikityanskiy1-2/+2
The number of queues can change by other means, rather than ethtool. For example, attaching an mqprio qdisc with num_tc > 1 leads to creating multiple sets of TX queues, which may be then destroyed when mqprio is deleted. If an AF_XDP socket is created while mqprio is active, dev->_tx[queue_id].pool will be filled, but then real_num_tx_queues may decrease with deletion of mqprio, which will mean that the pool won't be NULLed, and a further increase of the number of TX queues may expose a dangling pointer. To avoid any potential misbehavior, this commit clears pool for RX and TX queues, regardless of real_num_*_queues, still taking into consideration num_*_queues to avoid overflows. Fixes: 1c1efc2af158 ("xsk: Create and free buffer pool independently from umem") Fixes: a41b4f3c58dd ("xsk: simplify xdp_clear_umem_at_qid implementation") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20210118160333.333439-1-maximmi@mellanox.com
2021-01-19bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callbackMircea Cirjaliu1-1/+1
I assume this was obtained by copy/paste. Point it to bpf_map_peek_elem() instead of bpf_map_pop_elem(). In practice it may have been less likely hit when under JIT given shielded via 84430d4232c3 ("bpf, verifier: avoid retpoline for map push/pop/peek operation"). Fixes: f1a2e44a3aec ("bpf: add queue and stack maps") Signed-off-by: Mircea Cirjaliu <mcirjaliu@bitdefender.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Mauricio Vasquez <mauriciovasquezbernal@gmail.com> Link: https://lore.kernel.org/bpf/AM7PR02MB6082663DFDCCE8DA7A6DD6B1BBA30@AM7PR02MB6082.eurprd02.prod.outlook.com
2021-01-19sh_eth: Make PHY access aware of Runtime PM to fix reboot crashGeert Uytterhoeven1-0/+26
Wolfram reports that his R-Car H2-based Lager board can no longer be rebooted in v5.11-rc1, as it crashes with an imprecise external abort. The issue can be reproduced on other boards (e.g. Koelsch with R-Car M2-W) too, if CONFIG_IP_PNP is disabled, and the Ethernet interface is down at reboot time: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 pgd = (ptrval) [00000000] *pgd=422b6835, *pte=00000000, *ppte=00000000 Internal error: : 1406 [#1] ARM Modules linked in: CPU: 0 PID: 1105 Comm: init Tainted: G W 5.10.0-rc1-00402-ge2f016cf7751 #1048 Hardware name: Generic R-Car Gen2 (Flattened Device Tree) PC is at sh_mdio_ctrl+0x44/0x60 LR is at sh_mmd_ctrl+0x20/0x24 ... Backtrace: [<c0451f30>] (sh_mdio_ctrl) from [<c0451fd4>] (sh_mmd_ctrl+0x20/0x24) r7:0000001f r6:00000020 r5:00000002 r4:c22a1dc4 [<c0451fb4>] (sh_mmd_ctrl) from [<c044fc18>] (mdiobb_cmd+0x38/0xa8) [<c044fbe0>] (mdiobb_cmd) from [<c044feb8>] (mdiobb_read+0x58/0xdc) r9:c229f844 r8:c0c329dc r7:c221e000 r6:00000001 r5:c22a1dc4 r4:00000001 [<c044fe60>] (mdiobb_read) from [<c044c854>] (__mdiobus_read+0x74/0xe0) r7:0000001f r6:00000001 r5:c221e000 r4:c221e000 [<c044c7e0>] (__mdiobus_read) from [<c044c9d8>] (mdiobus_read+0x40/0x54) r7:0000001f r6:00000001 r5:c221e000 r4:c221e458 [<c044c998>] (mdiobus_read) from [<c044d678>] (phy_read+0x1c/0x20) r7:ffffe000 r6:c221e470 r5:00000200 r4:c229f800 [<c044d65c>] (phy_read) from [<c044d94c>] (kszphy_config_intr+0x44/0x80) [<c044d908>] (kszphy_config_intr) from [<c044694c>] (phy_disable_interrupts+0x44/0x50) r5:c229f800 r4:c229f800 [<c0446908>] (phy_disable_interrupts) from [<c0449370>] (phy_shutdown+0x18/0x1c) r5:c229f800 r4:c229f804 [<c0449358>] (phy_shutdown) from [<c040066c>] (device_shutdown+0x168/0x1f8) [<c0400504>] (device_shutdown) from [<c013de44>] (kernel_restart_prepare+0x3c/0x48) r9:c22d2000 r8:c0100264 r7:c0b0d034 r6:00000000 r5:4321fedc r4:00000000 [<c013de08>] (kernel_restart_prepare) from [<c013dee0>] (kernel_restart+0x1c/0x60) [<c013dec4>] (kernel_restart) from [<c013e1d8>] (__do_sys_reboot+0x168/0x208) r5:4321fedc r4:01234567 [<c013e070>] (__do_sys_reboot) from [<c013e2e8>] (sys_reboot+0x18/0x1c) r7:00000058 r6:00000000 r5:00000000 r4:00000000 [<c013e2d0>] (sys_reboot) from [<c0100060>] (ret_fast_syscall+0x0/0x54) As of commit e2f016cf775129c0 ("net: phy: add a shutdown procedure"), system reboot calls phy_disable_interrupts() during shutdown. As this happens unconditionally, the PHY registers may be accessed while the device is suspended, causing undefined behavior, which may crash the system. Fix this by wrapping the PHY bitbang accessors in the sh_eth driver by wrappers that take care of Runtime PM, to resume the device when needed. Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19mdio-bitbang: Export mdiobb_{read,write}()Geert Uytterhoeven2-2/+7
Export mdiobb_read() and mdiobb_write(), so Ethernet controller drivers can call them from their MDIO read/write wrappers. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net: core: devlink: use right genl user_ptr when handling port param get/setOleksandr Mazur1-2/+2
Fix incorrect user_ptr dereferencing when handling port param get/set: idx [0] stores the 'struct devlink' pointer; idx [1] stores the 'struct devlink_port' pointer; Fixes: 637989b5d77e ("devlink: Always use user_ptr[0] for devlink and simplify post_doit") CC: Parav Pandit <parav@mellanox.com> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Link: https://lore.kernel.org/r/20210119085333.16833-1-vadym.kochan@plvision.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18tcp: fix TCP_USER_TIMEOUT with zero windowEnke Chen6-7/+14
The TCP session does not terminate with TCP_USER_TIMEOUT when data remain untransmitted due to zero window. The number of unanswered zero-window probes (tcp_probes_out) is reset to zero with incoming acks irrespective of the window size, as described in tcp_probe_timer(): RFC 1122 4.2.2.17 requires the sender to stay open indefinitely as long as the receiver continues to respond probes. We support this by default and reset icsk_probes_out with incoming ACKs. This counter, however, is the wrong one to be used in calculating the duration that the window remains closed and data remain untransmitted. Thanks to Jonathan Maxwell <jmaxwell37@gmail.com> for diagnosing the actual issue. In this patch a new timestamp is introduced for the socket in order to track the elapsed time for the zero-window probes that have not been answered with any non-zero window ack. Fixes: 9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT") Reported-by: William McCall <william.mccall@gmail.com> Co-developed-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Enke Chen <enchen@paloaltonetworks.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210115223058.GA39267@localhost.localdomain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18ipv6: set multicast flag on the multicast routeMatteo Croce1-1/+1
The multicast route ff00::/8 is created with type RTN_UNICAST: $ ip -6 -d route unicast ::1 dev lo proto kernel scope global metric 256 pref medium unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium unicast ff00::/8 dev eth0 proto kernel scope global metric 256 pref medium Set the type to RTN_MULTICAST which is more appropriate. Fixes: e8478e80e5a7 ("net/ipv6: Save route type in rt6_info") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18ipv6: create multicast route with RTPROT_KERNELMatteo Croce1-0/+1
The ff00::/8 multicast route is created without specifying the fc_protocol field, so the default RTPROT_BOOT value is used: $ ip -6 -d route unicast ::1 dev lo proto kernel scope global metric 256 pref medium unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium unicast ff00::/8 dev eth0 proto boot scope global metric 256 pref medium As the documentation says, this value identifies routes installed during boot, but the route is created when interface is set up. Change the value to RTPROT_KERNEL which is a better value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18net: dsa: mv88e6xxx: also read STU state in mv88e6250_g1_vtu_getnextRasmus Villemoes1-0/+4
mv88e6xxx_port_vlan_join checks whether the VTU already contains an entry for the given vid (via mv88e6xxx_vtu_getnext), and if so, merely changes the relevant .member[] element and loads the updated entry into the VTU. However, at least for the mv88e6250, the on-stack struct mv88e6xxx_vtu_entry vlan never has its .state[] array explicitly initialized, neither in mv88e6xxx_port_vlan_join() nor inside the getnext implementation. So the new entry has random garbage for the STU bits, breaking VLAN filtering. When the VTU entry is initially created, those bits are all zero, and we should make sure to keep them that way when the entry is updated. Fixes: 92307069a96c (net: dsa: mv88e6xxx: Avoid VTU corruption on 6097) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18net: mscc: ocelot: allow offloading of bridge on top of LAGVladimir Oltean1-3/+1
The blamed commit was too aggressive, and it made ocelot_netdevice_event react only to network interface events emitted for the ocelot switch ports. In fact, only the PRECHANGEUPPER should have had that check. When we ignore all events that are not for us, we miss the fact that the upper of the LAG changes, and the bonding interface gets enslaved to a bridge. This is an operation we could offload under certain conditions. Fixes: 7afb3e575e5a ("net: mscc: ocelot: don't handle netdev events for other netdevs") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210118135210.2666246-1-olteanv@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18x86/xen: fix 'nopvspin' build errorRandy Dunlap1-0/+2
Fix build error in x86/xen/ when PARAVIRT_SPINLOCKS is not enabled. Fixes this build error: ../arch/x86/xen/smp_hvm.c: In function ‘xen_hvm_smp_init’: ../arch/x86/xen/smp_hvm.c:77:3: error: ‘nopvspin’ undeclared (first use in this function) nopvspin = true; Fixes: 3d7746bea925 ("x86/xen: Fix xen_hvm_smp_init() when vector callback not available") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210115191123.27572-1-rdunlap@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-17Linux 5.11-rc4Linus Torvalds1-1/+1
2021-01-17mm: don't put pinned pages into the swap cacheLinus Torvalds1-0/+2
So technically there is nothing wrong with adding a pinned page to the swap cache, but the pinning obviously means that the page can't actually be free'd right now anyway, so it's a bit pointless. However, the real problem is not with it being a bit pointless: the real issue is that after we've added it to the swap cache, we'll try to unmap the page. That will succeed, because the code in mm/rmap.c doesn't know or care about pinned pages. Even the unmapping isn't fatal per se, since the page will stay around in memory due to the pinning, and we do hold the connection to it using the swap cache. But when we then touch it next and take a page fault, the logic in do_swap_page() will map it back into the process as a possibly read-only page, and we'll then break the page association on the next COW fault. Honestly, this issue could have been fixed in any of those other places: (a) we could refuse to unmap a pinned page (which makes conceptual sense), or (b) we could make sure to re-map a pinned page writably in do_swap_page(), or (c) we could just make do_wp_page() not COW the pinned page (which was what we historically did before that "mm: do_wp_page() simplification" commit). But while all of them are equally valid models for breaking this chain, not putting pinned pages into the swap cache in the first place is the simplest one by far. It's also the safest one: the reason why do_wp_page() was changed in the first place was that getting the "can I re-use this page" wrong is so fraught with errors. If you do it wrong, you end up with an incorrectly shared page. As a result, using "page_maybe_dma_pinned()" in either do_wp_page() or do_swap_page() would be a serious bug since it is only a (very good) heuristic. Re-using the page requires a hard black-and-white rule with no room for ambiguity. In contrast, saying "this page is very likely dma pinned, so let's not add it to the swap cache and try to unmap it" is an obviously safe thing to do, and if the heuristic might very rarely be a false positive, no harm is done. Fixes: 09854ba94c6a ("mm: do_wp_page() simplification") Reported-and-tested-by: Martin Raiber <martin@urbackup.org> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-17x86/hyperv: Initialize clockevents after LAPIC is initializedDexuan Cui1-3/+26
With commit 4df4cb9e99f8, the Hyper-V direct-mode STIMER is actually initialized before LAPIC is initialized: see apic_intr_mode_init() x86_platform.apic_post_init() hyperv_init() hv_stimer_alloc() apic_bsp_setup() setup_local_APIC() setup_local_APIC() temporarily disables LAPIC, initializes it and re-eanble it. The direct-mode STIMER depends on LAPIC, and when it's registered, it can be programmed immediately and the timer can fire very soon: hv_stimer_init clockevents_config_and_register clockevents_register_device tick_check_new_device tick_setup_device tick_setup_periodic(), tick_setup_oneshot() clockevents_program_event When the timer fires in the hypervisor, if the LAPIC is in the disabled state, new versions of Hyper-V ignore the event and don't inject the timer interrupt into the VM, and hence the VM hangs when it boots. Note: when the VM starts/reboots, the LAPIC is pre-enabled by the firmware, so the window of LAPIC being temporarily disabled is pretty small, and the issue can only happen once out of 100~200 reboots for a 40-vCPU VM on one dev host, and on another host the issue doesn't reproduce after 2000 reboots. The issue is more noticeable for kdump/kexec, because the LAPIC is disabled by the first kernel, and stays disabled until the kdump/kexec kernel enables it. This is especially an issue to a Generation-2 VM (for which Hyper-V doesn't emulate the PIT timer) when CONFIG_HZ=1000 (rather than CONFIG_HZ=250) is used. Fix the issue by moving hv_stimer_alloc() to a later place where the LAPIC timer is initialized. Fixes: 4df4cb9e99f8 ("x86/hyperv: Initialize clockevents earlier in CPU onlining") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20210116223136.13892-1-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-01-17ia64: fix build failure caused by memory model changesMike Rapoport1-0/+1
The change of ia64's default memory model to SPARSEMEM causes defconfig build to fail: CC kernel/async.o In file included from include/linux/numa.h:25, from include/linux/async.h:13, from kernel/async.c:47: arch/ia64/include/asm/sparsemem.h:14:40: warning: "PAGE_SHIFT" is not defined, evaluates to 0 [-Wundef] 14 | #if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS) | ^~~~~~~~~~ In file included from include/linux/gfp.h:6, from include/linux/xarray.h:14, from include/linux/radix-tree.h:19, from include/linux/idr.h:15, from include/linux/kernfs.h:13, from include/linux/sysfs.h:16, from include/linux/kobject.h:20, from include/linux/energy_model.h:7, from include/linux/device.h:16, from include/linux/async.h:14, from kernel/async.c:47: include/linux/mmzone.h:1156:2: error: #error Allocator MAX_ORDER exceeds SECTION_SIZE 1156 | #error Allocator MAX_ORDER exceeds SECTION_SIZE | ^~~~~ The error cause is the missing definition of PAGE_SHIFT in the calculation of SECTION_SIZE_BITS. Add include of <asm/page.h> to arch/ia64/include/asm/sparsemem.h to solve the problem. Fixes: 214496cb1870 ("ia64: make SPARSEMEM default and disable DISCONTIGMEM") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
2021-01-16skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() tooAlexander Lobakin1-1/+5
Commit 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") ensured that skbs with data size lower than 1025 bytes will be kmalloc'ed to avoid excessive page cache fragmentation and memory consumption. However, the fix adressed only __napi_alloc_skb() (primarily for virtio_net and napi_get_frags()), but the issue can still be achieved through __netdev_alloc_skb(), which is still used by several drivers. Drivers often allocate a tiny skb for headers and place the rest of the frame to frags (so-called copybreak). Mirror the condition to __netdev_alloc_skb() to handle this case too. Since v1 [0]: - fix "Fixes:" tag; - refine commit message (mention copybreak usecase). [0] https://lore.kernel.org/netdev/20210114235423.232737-1-alobakin@pm.me Fixes: a1c7fff7e18f ("net: netdev_alloc_skb() use build_skb()") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Link: https://lore.kernel.org/r/20210115150354.85967-1-alobakin@pm.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-16dump_common_audit_data(): fix racy accesses to ->d_nameAl Viro1-2/+5
We are not guaranteed the locking environment that would prevent dentry getting renamed right under us. And it's possible for old long name to be freed after rename, leading to UAF here. Cc: stable@kernel.org # v2.6.2+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-16mm: don't play games with pinned pages in clear_page_refsLinus Torvalds1-0/+21
Turning a pinned page read-only breaks the pinning after COW. Don't do it. The whole "track page soft dirty" state doesn't work with pinned pages anyway, since the page might be dirtied by the pinning entity without ever being noticed in the page tables. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-16mm: fix clear_refs_write lockingLinus Torvalds1-23/+9
Turning page table entries read-only requires the mmap_sem held for writing. So stop doing the odd games with turning things from read locks to write locks and back. Just get the write lock. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-15RISC-V: Fix maximum allowed phsyical memory for RV32Atish Patra1-2/+4
Linux kernel can only map 1GB of address space for RV32 as the page offset is set to 0xC0000000. The current description in the Kconfig is confusing as it indicates that RV32 can support 2GB of physical memory. That is simply not true for current kernel. In future, a 2GB split support can be added to allow 2GB physical address space. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15RISC-V: Set current memblock limitAtish Patra1-2/+14
Currently, linux kernel can not use last 4k bytes of addressable space because IS_ERR_VALUE macro treats those as an error. This will be an issue for RV32 as any memblock allocator potentially allocate chunk of memory from the end of DRAM (2GB) leading bad address error even though the address was technically valid. Fix this issue by limiting the memblock if available memory spans the entire address space. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.