| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
XFS is generally used on 64-bit, non-highmem platforms and xfile
mappings are accessed all the time. Reduce our pain by not allowing
any highmem mappings in the xfile page cache and remove all the kmap
calls for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
shmem_read_mapping_page_gfp always returns an uptodate page or an
ERR_PTR. Remove the code that tries to handle a non-uptodate page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
All current and pending xfile users use the xfile_obj_load
and xfile_obj_store API, so make those the actual implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
vfs_getattr is needed to query inode attributes for unknown underlying
file systems. But shmemfs is well known for users of shmem_file_setup
and shmem_read_mapping_page_gfp that rely on it not needing specific
inode revalidation and having a normal mapping. Remove the detour
through the getattr method and an extra wrapper, and just read the
inode size and i_bytes directly in the scrub tracing code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
shmem_file_setup is explicitly intended for a file that can be
fully read and written by kernel users without restrictions. Don't
poke into internals to change random flags in the file or inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
shmem_kernel_file_setup is equivalent to shmem_file_setup except that it
already sets the S_PRIVATE flag. Use it instead of open coding the
logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
shmem_file_setup always returns a struct file pointer or an ERR_PTR,
so remove the code to check for a NULL return.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfile_create creates a (potentially large) sparse file. Pass
VM_NORESERVE to shmem_file_setup to not account for the entire file size
at file creation time.
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Add a blurb that simply dirtying the folio will persist data for in-kernel
shmem files. This is what most of the callers already do.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
XFS wants to use this for it's internal in-memory data structures and
currently duplicates the functionality. Export shmem_kernel_file_setup
to allow XFS to switch over to using the proper kernel API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Export shmem_get_folio as a slightly lower-level variant of
shmem_read_folio_gfp. This will be useful for XFS xfile use cases
that want to pass SGP_NOALLOC or get a locked page, which the thin
shmem_read_folio_gfp wrapper can't provide.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Move the check that the inode really is a shmemfs one from
shmem_read_folio_gfp to shmem_get_folio_gfp given that shmem_get_folio
can also be called from outside of shmem.c. Also turn it into a
WARN_ON_ONCE and error return instead of BUG_ON to be less severe.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Set the a_ops in shmem_symlink before reading a folio from the mapping
to prepare for asserting that shmem_get_folio is only called on shmem
mappings.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
shmem_aops really should not be exported to the world. Move
shmem_mapping and export it as internal for the one semi-legitimate
modular user in udmabuf.
This effectively reverts commit 30e6a51dbb05 ("mm/shmem.c: make
shmem_mapping() inline"). which added a bogus shmem_aops non-GPL export
for no reason whatsoever as there as no shmem_mapping call outside of
core MM code at that point.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
mapping_set_update is only used inside mm/. Move mapping_set_update to
mm/internal.h and turn it into an inline function instead of a macro.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Another incorrect conversion to kfree() instead of kvfree().
Fixes: 49292576136f ("xfs: convert kmem_free() for kvmalloc users to kvfree()")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Wrongly converted from kmem_free() to kfree().
Reported-by: Matthew Wilcox <willy@infradead.org>
Fixes: 49292576136f ("xfs: convert kmem_free() for kvmalloc users to kvfree()")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
mrlock was an rwsem wrapper that also recorded whether the lock was
held for read or write. Now that we can ask the generic code whether
the lock is held for read or write, we can remove this wrapper and use
an rwsem directly.
As the comment says, we can't use lockdep to assert that the ILOCK is
held for write, because we might be in a workqueue, and we aren't able
to tell lockdep that we do in fact own the lock.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
To use the new rwsem_assert_held()/rwsem_assert_held_write(), we can't
use the existing ASSERT macro. Add a new xfs_assert_ilocked() and
convert all the callers.
Fix an apparent bug in xfs_isilocked(): If the caller specifies
XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL, xfs_assert_ilocked() will check both
the IOLOCK and the ILOCK are held for write. xfs_isilocked() only
checked that the ILOCK was held for write.
xfs_assert_ilocked() is always on, even if DEBUG or XFS_WARN aren't
defined. It's a cheap check, so I don't think it's worth defining
it away.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Modelled after lockdep_assert_held() and lockdep_assert_held_write(),
but are always active, even when lockdep is disabled. Of course, they
don't test that _this_ thread is the owner, but it's sufficient to catch
many bugs and doesn't incur the same performance penalty as lockdep.
Acked-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Without this the kernel crashes in kfree for files with a sufficiently
large number of extents.
Fixes: d4c75a1b40cd ("xfs: convert remaining kmem_free() to kfree()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
While performing the IO fault injection test, I caught the following data
corruption report:
XFS (dm-0): Internal error ltbno + ltlen > bno at line 1957 of file fs/xfs/libxfs/xfs_alloc.c. Caller xfs_free_ag_extent+0x79c/0x1130
CPU: 3 PID: 33 Comm: kworker/3:0 Not tainted 6.5.0-rc7-next-20230825-00001-g7f8666926889 #214
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
Workqueue: xfs-inodegc/dm-0 xfs_inodegc_worker
Call Trace:
<TASK>
dump_stack_lvl+0x50/0x70
xfs_corruption_error+0x134/0x150
xfs_free_ag_extent+0x7d3/0x1130
__xfs_free_extent+0x201/0x3c0
xfs_trans_free_extent+0x29b/0xa10
xfs_extent_free_finish_item+0x2a/0xb0
xfs_defer_finish_noroll+0x8d1/0x1b40
xfs_defer_finish+0x21/0x200
xfs_itruncate_extents_flags+0x1cb/0x650
xfs_free_eofblocks+0x18f/0x250
xfs_inactive+0x485/0x570
xfs_inodegc_worker+0x207/0x530
process_scheduled_works+0x24a/0xe10
worker_thread+0x5ac/0xc60
kthread+0x2cd/0x3c0
ret_from_fork+0x4a/0x80
ret_from_fork_asm+0x11/0x20
</TASK>
XFS (dm-0): Corruption detected. Unmount and run xfs_repair
After analyzing the disk image, it was found that the corruption was
triggered by the fact that extent was recorded in both inode datafork
and AGF btree blocks. After a long time of reproduction and analysis,
we found that the reason of free sapce btree corruption was that the
AGF btree was not recovered correctly.
Consider the following situation, Checkpoint A and Checkpoint B are in
the same record and share the same start LSN1, buf items of same object
(AGF btree block) is included in both Checkpoint A and Checkpoint B. If
the buf item in Checkpoint A has been recovered and updates metadata LSN
permanently, then the buf item in Checkpoint B cannot be recovered,
because log recovery skips items with a metadata LSN >= the current LSN
of the recovery item. If there is still an inode item in Checkpoint B
that records the Extent X, the Extent X will be recorded in both inode
datafork and AGF btree block after Checkpoint B is recovered. Such
transaction can be seen when allocing enxtent for inode bmap, it record
both the addition of extent to the inode extent list and the removing
extent from the AGF.
|------------Record (LSN1)------------------|---Record (LSN2)---|
|-------Checkpoint A----------|----------Checkpoint B-----------|
| Buf Item(Extent X) | Buf Item / Inode item(Extent X) |
| Extent X is freed | Extent X is allocated |
After commit 12818d24db8a ("xfs: rework log recovery to submit buffers
on LSN boundaries") was introduced, we submit buffers on lsn boundaries
during log recovery. The above problem can be avoided under normal paths,
but it's not guaranteed under abnormal paths. Consider the following
process, if an error was encountered after recover buf item in Checkpoint
A and before recover buf item in Checkpoint B, buffers that have been
added to the buffer_list will still be submitted, this violates the
submits rule on lsn boundaries. So buf item in Checkpoint B cannot be
recovered on the next mount due to current lsn of transaction equal to
metadata lsn on disk. The detailed process of the problem is as follows.
First Mount:
xlog_do_recovery_pass
error = xlog_recover_process
xlog_recover_process_data
xlog_recover_process_ophdr
xlog_recovery_process_trans
...
/* recover buf item in Checkpoint A */
xlog_recover_buf_commit_pass2
xlog_recover_do_reg_buffer
/* add buffer of agf btree block to buffer_list */
xfs_buf_delwri_queue(bp, buffer_list)
...
==> Encounter read IO error and return
/* submit buffers regardless of error */
if (!list_empty(&buffer_list))
xfs_buf_delwri_submit(&buffer_list);
<buf items of agf btree block in Checkpoint A recovery success>
Second Mount:
xlog_do_recovery_pass
error = xlog_recover_process
xlog_recover_process_data
xlog_recover_process_ophdr
xlog_recovery_process_trans
...
/* recover buf item in Checkpoint B */
xlog_recover_buf_commit_pass2
/* buffer of agf btree block wouldn't added to
buffer_list due to lsn equal to current_lsn */
if (XFS_LSN_CMP(lsn, current_lsn) >= 0)
goto out_release
<buf items of agf btree block in Checkpoint B wouldn't recovery>
In order to make sure that submits buffers on lsn boundaries in the
abnormal paths, we need to check error status before submit buffers that
have been added from the last record processed. If error status exist,
buffers in the bufffer_list should not be writen to disk.
Canceling the buffers in the buffer_list directly isn't correct, unlike
any other place where write list was canceled, these buffers has been
initialized by xfs_buf_item_init() during recovery and held by buf item,
buf items will not be released in xfs_buf_delwri_cancel(), it's not easy
to solve.
If the filesystem has been shut down, then delwri list submission will
error out all buffers on the list via IO submission/completion and do
all the correct cleanup automatically. So shutting down the filesystem
could prevents buffers in the bufffer_list from being written to disk.
Fixes: 50d5c8d8e938 ("xfs: check LSN ordering for v5 superblocks during recovery")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
when a ifdef is used in the below manner, second one could be considered as
duplicate.
ifdef DEFINE_A
...code block...
ifdef DEFINE_A
...code block...
endif
...code block...
endif
In the xfs code two such patterns were seen. Hence removing these ifdefs.
No functional change is intended here. It only aims to improve code
readability.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
While testing a 64k-blocksize filesystem, I noticed that xfs/709 fails
to rebuild the inode btree with a bunch of "Corruption remains"
messages. It turns out that when the inode chunk size is smaller than a
single filesystem block, no block alignments constraints are necessary
for inode chunk allocations, and sb_spino_align is zero. Hence we can
skip the check.
Fixes: dbfbf3bdf639 ("xfs: repair inode btrees")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Noticed by inspection, simple factoring allows the same allocation
routine to be used for both transaction and recovery contexts.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
These few remaining GFP_NOFS callers do not need to use GFP_NOFS at
all. They are only called from a non-transactional context or cannot
be accessed from memory reclaim due to other constraints. Hence they
can just use GFP_KERNEL.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
This is core code that needs to run in low memory conditions and
can be triggered from memory reclaim. While it runs in a workqueue,
it really shouldn't be recursing back into the filesystem during
any memory allocation it needs to function.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
When recovery starts processing intents, all of the initial intent
allocations are done outside of transaction contexts. That means
they need to specifically use GFP_NOFS as we do not want memory
reclaim to attempt to run direct reclaim of filesystem objects while
we have lots of objects added into deferred operations.
Rather than use GFP_NOFS for these specific allocations, just place
the entire intent recovery process under NOFS context and we can
then just use GFP_KERNEL for these allocations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
When running in a transaction context, memory allocations are scoped
to GFP_NOFS. Hence we don't need to use GFP_NOFS contexts in pure
transaction context allocations - GFP_KERNEL will automatically get
converted to GFP_NOFS as appropriate.
Go through the code and convert all the obvious GFP_NOFS allocations
in transaction context to use GFP_KERNEL. This further reduces the
explicit use of GFP_NOFS in XFS.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
In the past we've had problems with lockdep false positives stemming
from inode locking occurring in memory reclaim contexts (e.g. from
superblock shrinkers). Lockdep doesn't know that inodes access from
above memory reclaim cannot be accessed from below memory reclaim
(and vice versa) but there has never been a good solution to solving
this problem with lockdep annotations.
This situation isn't unique to inode locks - buffers are also locked
above and below memory reclaim, and we have to maintain lock
ordering for them - and against inodes - appropriately. IOWs, the
same code paths and locks are taken both above and below memory
reclaim and so we always need to make sure the lock orders are
consistent. We are spared the lockdep problems this might cause
by the fact that semaphores and bit locks aren't covered by lockdep.
In general, this sort of lockdep false positive detection is cause
by code that runs GFP_KERNEL memory allocation with an actively
referenced inode locked. When it is run from a transaction, memory
allocation is automatically GFP_NOFS, so we don't have reclaim
recursion issues. So in the places where we do memory allocation
with inodes locked outside of a transaction, we have explicitly set
them to use GFP_NOFS allocations to prevent lockdep false positives
from being reported if the allocation dips into direct memory
reclaim.
More recently, __GFP_NOLOCKDEP was added to the memory allocation
flags to tell lockdep not to track that particular allocation for
the purposes of reclaim recursion detection. This is a much better
way of preventing false positives - it allows us to use GFP_KERNEL
context outside of transactions, and allows direct memory reclaim to
proceed normally without throwing out false positive deadlock
warnings.
The obvious places that lock inodes and do memory allocation are the
lookup paths and inode extent list initialisation. These occur in
non-transactional GFP_KERNEL contexts, and so can run direct reclaim
and lock inodes.
This patch makes a first path through all the explicit GFP_NOFS
allocations in XFS and converts the obvious ones to GFP_KERNEL |
__GFP_NOLOCKDEP as a first step towards removing explicit GFP_NOFS
allocations from the XFS code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
We currently use a btree walk in the fstrim code. This requires a
btree cursor and btree cursors are only used inside transactions
except for the fstrim code. This means that all the btree operations
that allocate memory operate in both GFP_KERNEL and GFP_NOFS
contexts.
This causes problems with lockdep being unable to determine the
difference between objects that are safe to lock both above and
below memory reclaim. Free space btree buffers are definitely locked
both above and below reclaim and that means we have to mark all
btree infrastructure allocations with GFP_NOFS to avoid potential
lockdep false positives.
If we wrap this btree walk in an empty cursor, all btree walks are
now done under transaction context and so all allocations inherit
GFP_NOFS context from the tranaction. This enables us to move all
the btree allocations to GFP_KERNEL context and hence help remove
the explicit use of GFP_NOFS in XFS.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
The remaining callers of kmem_free() are freeing heap memory, so
we can convert them directly to kfree() and get rid of kmem_free()
altogether.
This conversion was done with:
$ for f in `git grep -l kmem_free fs/xfs`; do
> sed -i s/kmem_free/kfree/ $f
> done
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Start getting rid of kmem_free() by converting all the cases where
memory can come from vmalloc interfaces to calling kvfree()
directly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Move it to the general xfs linux wrapper header file so we can
prepare to remove kmem.h
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
kmem_alloc() is just a thin wrapper around kmalloc() these days.
Convert everything to use kmalloc() so we can get rid of the
wrapper.
Note: the transaction region allocation in xlog_add_to_transaction()
can be a high order allocation. Converting it to use
kmalloc(__GFP_NOFAIL) results in warnings in the page allocation
code being triggered because the mm subsystem does not want us to
use __GFP_NOFAIL with high order allocations like we've been doing
with the kmem_alloc() wrapper for a couple of decades. Hence this
specific case gets converted to xlog_kvmalloc() rather than
kmalloc() to avoid this issue.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
There's no reason to keep the kmem_zalloc() around anymore, it's
just a thin wrapper around kmalloc(), so lets get rid of it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
|
|
We've had issues with gcc and 'asm goto' before, and we created a
'asm_volatile_goto()' macro for that in the past: see commits
3f0116c3238a ("compiler/gcc4: Add quirk for 'asm goto' miscompilation
bug") and a9f180345f53 ("compiler/gcc4: Make quirk for
asm_volatile_goto() unconditional").
Then, much later, we ended up removing the workaround in commit
43c249ea0b1e ("compiler-gcc.h: remove ancient workaround for gcc PR
58670") because we no longer supported building the kernel with the
affected gcc versions, but we left the macro uses around.
Now, Sean Christopherson reports a new version of a very similar
problem, which is fixed by re-applying that ancient workaround. But the
problem in question is limited to only the 'asm goto with outputs'
cases, so instead of re-introducing the old workaround as-is, let's
rename and limit the workaround to just that much less common case.
It looks like there are at least two separate issues that all hit in
this area:
(a) some versions of gcc don't mark the asm goto as 'volatile' when it
has outputs:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420
which is easy to work around by just adding the 'volatile' by hand.
(b) Internal compiler errors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422
which are worked around by adding the extra empty 'asm' as a
barrier, as in the original workaround.
but the problem Sean sees may be a third thing since it involves bad
code generation (not an ICE) even with the manually added 'volatile'.
but the same old workaround works for this case, even if this feels a
bit like voodoo programming and may only be hiding the issue.
Reported-and-tested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Andrew Pinski <quic_apinski@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When a user tries to use the "sec=krb5p" mount parameter to encrypt
data on connection to a server (when authenticating with Kerberos), we
indicate that it is not supported, but do not note the equivalent
recommended mount parameter ("sec=krb5,seal") which turns on encryption
for that mount (and uses Kerberos for auth). Update the warning message.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Based on our implementation of multichannel, it is entirely
possible that a server struct may not be found in any channel
of an SMB session.
In such cases, we should be prepared to move on and search for
the server struct in the next session.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a tcon is marked for need_reconnect, the intention
is to have it reconnected.
This change adjusts tcon->status in cifs_tree_connect
when need_reconnect is set. Also, this change has a minor
correction in resetting need_reconnect on success. It makes
sure that it is done with tc_lock held.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The kernel built with MCRUSOE is unbootable on Transmeta Crusoe. It shows
the following error message:
This kernel requires an i686 CPU, but only detected an i586 CPU.
Unable to boot - please use a kernel appropriate for your CPU.
Remove MCRUSOE from the condition introduced in commit in Fixes, effectively
changing X86_MINIMUM_CPU_FAMILY back to 5 on that machine, which matches the
CPU family given by CPUID.
[ bp: Massage commit message. ]
Fixes: 25d76ac88821 ("x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig")
Signed-off-by: Aleksander Mazur <deweloper@wp.pl>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240123134309.1117782-1-deweloper@wp.pl
|
|
While looking at improving the saved_cmdlines cache I found a huge amount
of wasted memory that should be used for the cmdlines.
The tracing data saves pids during the trace. At sched switch, if a trace
occurred, it will save the comm of the task that did the trace. This is
saved in a "cache" that maps pids to comms and exposed to user space via
the /sys/kernel/tracing/saved_cmdlines file. Currently it only caches by
default 128 comms.
The structure that uses this creates an array to store the pids using
PID_MAX_DEFAULT (which is usually set to 32768). This causes the structure
to be of the size of 131104 bytes on 64 bit machines.
In hex: 131104 = 0x20020, and since the kernel allocates generic memory in
powers of two, the kernel would allocate 0x40000 or 262144 bytes to store
this structure. That leaves 131040 bytes of wasted space.
Worse, the structure points to an allocated array to store the comm names,
which is 16 bytes times the amount of names to save (currently 128), which
is 2048 bytes. Instead of allocating a separate array, make the structure
end with a variable length string and use the extra space for that.
This is similar to a recommendation that Linus had made about eventfs_inode names:
https://lore.kernel.org/all/20240130190355.11486-5-torvalds@linux-foundation.org/
Instead of allocating a separate string array to hold the saved comms,
have the structure end with: char saved_cmdlines[]; and round up to the
next power of two over sizeof(struct saved_cmdline_buffers) + num_cmdlines * TASK_COMM_LEN
It will use this extra space for the saved_cmdline portion.
Now, instead of saving only 128 comms by default, by using this wasted
space at the end of the structure it can save over 8000 comms and even
saves space by removing the need for allocating the other array.
Link: https://lore.kernel.org/linux-trace-kernel/20240209063622.1f7b6d5f@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Mete Durlu <meted@linux.ibm.com>
Fixes: 939c7a4f04fcd ("tracing: Introduce saved_cmdlines_size file")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The commit 60c8971899f3 ("ftrace: Make DIRECT_CALLS work WITH_ARGS
and !WITH_REGS") changed DIRECT_CALLS to use SAVE_ARGS when there
are multiple ftrace_ops at the same function, but since the x86 only
support to jump to direct_call from ftrace_regs_caller, when we set
the function tracer on the same target function on x86, ftrace-direct
does not work as below (this actually works on arm64.)
At first, insmod ftrace-direct.ko to put a direct_call on
'wake_up_process()'.
# insmod kernel/samples/ftrace/ftrace-direct.ko
# less trace
...
<idle>-0 [006] ..s1. 564.686958: my_direct_func: waking up rcu_preempt-17
<idle>-0 [007] ..s1. 564.687836: my_direct_func: waking up kcompactd0-63
<idle>-0 [006] ..s1. 564.690926: my_direct_func: waking up rcu_preempt-17
<idle>-0 [006] ..s1. 564.696872: my_direct_func: waking up rcu_preempt-17
<idle>-0 [007] ..s1. 565.191982: my_direct_func: waking up kcompactd0-63
Setup a function filter to the 'wake_up_process' too, and enable it.
# cd /sys/kernel/tracing/
# echo wake_up_process > set_ftrace_filter
# echo function > current_tracer
# less trace
...
<idle>-0 [006] ..s3. 686.180972: wake_up_process <-call_timer_fn
<idle>-0 [006] ..s3. 686.186919: wake_up_process <-call_timer_fn
<idle>-0 [002] ..s3. 686.264049: wake_up_process <-call_timer_fn
<idle>-0 [002] d.h6. 686.515216: wake_up_process <-kick_pool
<idle>-0 [002] d.h6. 686.691386: wake_up_process <-kick_pool
Then, only function tracer is shown on x86.
But if you enable 'kprobe on ftrace' event (which uses SAVE_REGS flag)
on the same function, it is shown again.
# echo 'p wake_up_process' >> dynamic_events
# echo 1 > events/kprobes/p_wake_up_process_0/enable
# echo > trace
# less trace
...
<idle>-0 [006] ..s2. 2710.345919: p_wake_up_process_0: (wake_up_process+0x4/0x20)
<idle>-0 [006] ..s3. 2710.345923: wake_up_process <-call_timer_fn
<idle>-0 [006] ..s1. 2710.345928: my_direct_func: waking up rcu_preempt-17
<idle>-0 [006] ..s2. 2710.349931: p_wake_up_process_0: (wake_up_process+0x4/0x20)
<idle>-0 [006] ..s3. 2710.349934: wake_up_process <-call_timer_fn
<idle>-0 [006] ..s1. 2710.349937: my_direct_func: waking up rcu_preempt-17
To fix this issue, use SAVE_REGS flag for multiple ftrace_ops flag of
direct_call by default.
Link: https://lore.kernel.org/linux-trace-kernel/170484558617.178953.1590516949390270842.stgit@devnote2
Fixes: 60c8971899f3 ("ftrace: Make DIRECT_CALLS work WITH_ARGS and !WITH_REGS")
Cc: stable@vger.kernel.org
Cc: Florent Revest <revest@chromium.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Ensure no remaining requests in virtqueues before resetting vdev and
deleting virtqueues. Otherwise these requests will never be completed.
It may cause the system to become unresponsive.
Function blk_mq_quiesce_queue() can ensure that requests have become
in_flight status, but it cannot guarantee that requests have been
processed by the device. Virtqueues should never be deleted before
all requests become complete status.
Function blk_mq_freeze_queue() ensure that all requests in virtqueues
become complete status. And no requests can enter in virtqueues.
Signed-off-by: Yi Sun <yi.sun@unisoc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20240129085250.1550594-1-yi.sun@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When iocg_kick_delay() is called from a CPU different than the one which set
the delay, @now may be in the past of @iocg->delay_at leading to the
following warning:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1359:23
shift exponent 18446744073709 is too large for 64-bit type 'u64' (aka 'unsigned long long')
...
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xc0
__ubsan_handle_shift_out_of_bounds+0x2ab/0x300
iocg_kick_delay+0x222/0x230
ioc_rqos_merge+0x1d7/0x2c0
__rq_qos_merge+0x2c/0x80
bio_attempt_back_merge+0x83/0x190
blk_attempt_plug_merge+0x101/0x150
blk_mq_submit_bio+0x2b1/0x720
submit_bio_noacct_nocheck+0x320/0x3e0
__swap_writepage+0x2ab/0x9d0
The underflow itself doesn't really affect the behavior in any meaningful
way; however, the past timestamp may exaggerate the delay amount calculated
later in the code, which shouldn't be a material problem given the nature of
the delay mechanism.
If @now is in the past, this CPU is racing another CPU which recently set up
the delay and there's nothing this CPU can contribute w.r.t. the delay.
Let's bail early from iocg_kick_delay() in such cases.
Reported-by: Breno Leitão <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5160a5a53c0c ("blk-iocost: implement delay adjustment hysteresis")
Link: https://lore.kernel.org/r/ZVvc9L_CYk5LO1fT@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Send query dir requests with an info level of
SMB_FIND_FILE_FULL_DIRECTORY_INFO rather than
SMB_FIND_FILE_DIRECTORY_INFO when the client is generating its own
inode numbers (e.g. noserverino) so that reparse tags still
can be parsed directly from the responses, but server won't
send UniqueId (server inode number)
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Address static checker warning in cifs_ses_get_chan_index():
warn: variable dereferenced before check 'server'
To be consistent, and reduce risk, we should add another check
for null server pointer.
Fixes: 88675b22d34e ("cifs: do not search for channel if server is terminating")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ri and sym is assigned first, so it does not need to initialize the
assignment.
Link: https://lore.kernel.org/all/20230919012823.7815-1-zeming@nfschina.com/
Signed-off-by: Li zeming <zeming@nfschina.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Since the BTF type setting updates probe_arg::type, the type size
calculation and setting print-fmt should be done after that.
Without this fix, the argument size and print-fmt can be wrong.
Link: https://lore.kernel.org/all/170602218196.215583.6417859469540955777.stgit@devnote2/
Fixes: b576e09701c7 ("tracing/probes: Support function parameters if BTF is available")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
Christoph Hellwig
Dave Chinner
Matthew Wilcox (Oracle)
Long Li
Shrikanth Hegde
Darrick J. Wong
Linus Torvalds
Steve French
Shyam Prasad N
Aleksander Mazur
Steven Rostedt (Google)
Masami Hiramatsu (Google)
Yi Sun
Tejun Heo
Paulo Alcantara
Li zeming