| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
xe_pm_init is the very last thing during the xe_pci_probe(),
hence these protections are useless from the point of view
of ensuring that the device is awake.
Let's remove it so we continue towards the goal of killing
xe_device_mem_access.
v2: Adding more cases
v3: Provide a separate fix for xe_tile_init_noalloc return (Matt)
Adding a new case where display HDCP init calls which
are also called at display probe time.
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-5-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The mem_access itself is not holding any lock, but attempting
to train lockdep with possible scarring locks happening during
runtime pm. We are going soon to kill the mem_access get and put
helpers in favor of direct xe_pm_runtime calls, so let's just
move this lock around to where it now belongs.
v2: s/lockdep_training/lockdep_prime (Matt Auld)
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-4-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This patch brings no functional change. Since at this point of
the code we are already asserting a wakeref was held, it means
that we are with runtime_pm 'in_use' and in practical terms we
are only bumping the pm_runtime usage counter and moving on.
However, xe driver has a lockdep annotation that warned us that
if a sync resume was actually called at this point, we could have
a deadlock because we are inside the power_domains->lock locked
area and the resume would call the irq_reset, which would also
try to get the power_domains->lock.
For this reason, let's convert this call to a safer option and
calm lockdep on.
v2: use _noresume variant instead of get_in_use (Ville, Imre)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The i915-display will start using the intel_runtime_pm_noresume.
So we need to add the compat header before it.
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Let's ensure that we have an option for inner callers that will
raise WARN if device is not active and not protected by outer callers.
Make this also a void function forcing every caller to unconditionally
put the reference back afterwards.
This will be very important for cases where we want to hold the
reference before scheduling a work in a queue. Then the work job
will be responsible for putting it back.
While at this, already convert a case from mem_access_get_ongoing where
it is not checking for the reference and put it back, what would
cause the underflow.
v2: Fix identation.
v3: Convert equivalent missing put from mem_access towards pm_runtime.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Enable WA for a bug that could cause the C6 state machine to hang
during RC6 exit.
v2: Add comment clarifying the WA (John H)
v3: Add more details to the comment (John H)
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417054802.1766359-1-vinay.belgaumkar@intel.com
|
|
clangd complains here, since nothing in xe_gt.h seems to be needed.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412113144.259426-6-matthew.auld@intel.com
|
|
Now that we no longer grab the usm.lock mutex (which might sleep) it
looks like it should be safe to directly perform xe_vm_free when vm
refcount reaches zero, instead of punting that off to some worker.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412113144.259426-5-matthew.auld@intel.com
|
|
The asid is only erased from the xarray when the vm refcount reaches
zero, however this leads to potential UAF since the xe_vm_get() only
works on a vm with refcount != 0. Since the asid is allocated in the vm
create ioctl, rather erase it when closing the vm, prior to dropping the
potential last ref. This should also work when user closes driver fd
without explicit vm destroy.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1594
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412113144.259426-4-matthew.auld@intel.com
|
|
We have observed underruns on some platforms if the CFB offset is within
the first page of stolen. Just like i915 skip the first page.
v2 (Maarten)
- Also align the start.
BSpec: 50214
Reported-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412150301.273344-4-matthew.auld@intel.com
|
|
No need to be so aggressive here. The upper layers will already apply
the needed alignment, plus some allocations might wish to skip it. Main
issue is that we might want to have start/end bias range which doesn't
match the default alignment which is rejected by the allocator.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412150301.273344-3-matthew.auld@intel.com
|
|
ACPI_WMI is a subitem of X86_PLATFORM_DEVICES. And X86_PLATFORM_DEVICES
is not selected in the current Kconfig, and may cause Kconfig warnings:
WARNING: unmet direct dependencies detected for ACPI_WMI
Depends on [n]: X86_PLATFORM_DEVICES [=n] && ACPI [=y]
Selected by [m]:
- DRM_XE [=m] && HAS_IOMEM [=y] && DRM [=m] && PCI [=y] && MMU [=y] &&
(m && MODULES [=y] || y && KUNIT [=y]=y) && X86 [=y] && ACPI [=y]
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415025215.15811-1-yaolu@kylinos.cn
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Enable a couple of existing workarounds for a new platform.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410002646.3002394-3-John.C.Harrison@Intel.com
|
|
There are a couple of new workarounds for LNL that are implemented in
the GuC firmware. The KMD needs to enable them explicitly.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410002646.3002394-2-John.C.Harrison@Intel.com
|
|
To run correctly, each Virtual Function must be provisioned with
some chunk of shared hardware or firmware resources (like GGTT,
device memory, GuC doorbell IDs, GuC context IDs) and scheduling
parameters (execution quantum or preemption timeout).
All resources assigned to VFs must be excluded from the PF driver
use and may require some additional preparation steps (like setup
of the LMTT or update of the GGTT PTE). Those provisioning details
must be then sent to the GuC firmware as most of those details
will be shared later with the VF drivers during their boot.
Add basic functions to provision VFs with all hardware resources
or scheduling parameters. We will use them shortly in upcoming
patches either in manual provisioning over debugfs, exposed to the
advanced users, or automatic provisioning done by PF driver during
VFs enabling.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-7-michal.wajdeczko@intel.com
|
|
The PF driver must maintain additional GT level data per each VF.
This additional per-VF data will be added in upcoming patches and
will include: provisioning configuration (like GGTT space or LMEM
allocation sizes or scheduling parameters), monitoring thresholds
and counters, and more.
As number of supported VFs varies across platforms use flexible
array where first entry will contain metadata for the PF itself
(if such configuration parameter is applicable for the PF) and
all remaining entries will contain data for potential VFs.
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-6-michal.wajdeczko@intel.com
|
|
In upcoming patches the PF driver will add support to change VFs
configuration and will need to use PF2GUC_UPDATE_VF_CFG messages.
Add necessary definitions to our GuC firmware ABI header.
Definitions of the GuC VF Configuration KLVs used by this action
are already present in abi/guc_klvs_abi.h
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-5-michal.wajdeczko@intel.com
|
|
The PF driver will need to know size of the remaining available
VRAM to estimate fair VRAM allocations that could be used across
all VFs in automatic VFs provisioning mode. Add helper function
for that. We will use it in upcoming patch.
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-4-michal.wajdeczko@intel.com
|
|
VF's drivers can't modify GGTT PTEs except the range explicitly
assigned by the PF driver. To allow hardware enforcement of this
requirement, each GGTT PTE has a field with the VF number that
identifies which VF can modify that particular GGTT PTE entry.
Only PF driver can modify this field and PF driver shall do that
before VF drivers will be loaded. Add function to prepare PTEs.
Since it will be used only by the PF driver, make it available
only for CONFIG_PCI_IOV=y.
Bspec: 45015, 52395
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-3-michal.wajdeczko@intel.com
|
|
While the GuC firmware and the Xe driver are using VF identifier
VFID(0) to represent the Physical Function, we should avoid using
"VF0" name and use proper "PF" name in all user facing messages
related to the Physical Function and use "VFn" name only when
referrinf to the true Virtual Function. Add simple helper to get
properly formatted function name based on the function number.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-2-michal.wajdeczko@intel.com
|
|
Generate the mask of enabled L3 banks for the GT. It is stored with the
rest of the GT topology in a consistent representation across platforms.
For now the L3 bank mask is just printed in the log for developers to
easily figure out the fusing characteristics of machines that they are
trying to debug issues on. Later it can be used to replace existing code
in the driver that requires the L3 bank count (not mask). Also the mask
can easily be exposed to user space in a new query if needed.
v2: Better naming of variable and function (Matt Roper)
Bspec: 52545, 52546, 62482
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410123723.7-2-francois.dugast@intel.com
|
|
There are few knobs inside GuC firmware to control VFs scheduling.
Add basic functions to support their reconfigurations.
We will start using them shortly once we prepare debugfs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410170338.1199-6-michal.wajdeczko@intel.com
|
|
Many of the GuC actions use KLVs to pass additional parameters or
configuration data. Add few helper functions for better reporting
any information related to KLVs.
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410170338.1199-5-michal.wajdeczko@intel.com
|
|
In upcoming patches the PF driver will add support to change GuC
policies and will need to use PF2GUC_UPDATE_VGT_POLICY messages.
Add necessary definitions to our GuC firmware ABI header.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410170338.1199-4-michal.wajdeczko@intel.com
|
|
PF driver will maintain VF's configuration data mostly on the
GT level, but some internal data is located at the device level.
To allow easy access to that data from the GT level functions, and
to minimize code duplications, introduce set of helper functions
and macros for explicit use by the PF driver.
We will use these helpers in upcoming patches.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410170338.1199-3-michal.wajdeczko@intel.com
|
|
PF driver will maintain configurations and resources for every VF
and this data could span multiple tiles and/or GTs. Prepare mutex
to protect data that we will add in upcoming patches.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410170338.1199-2-michal.wajdeczko@intel.com
|
|
This is an effort to unify hmmptr (aka system allocator)
and userptr code. hmm_range_fault is used to populate
a virtual address range for both hmmptr and userptr,
instead of hmmptr using hmm_range_fault and userptr
using get_user_pages_fast.
This also aligns with AMD gpu driver's behavior. In
long term, we plan to put some common helpers in this
area to drm layer so it can be re-used by different
vendors.
-v1
use the function with parameter to confirm whether lock is
acquired by the caller or needs to be acquired in hmm_range_fault.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412095237.1048599-3-himal.prasad.ghimiray@intel.com
|
|
Introduce a helper function xe_userptr_populate_range to populate
a userptr range. This functions calls hmm_range_fault to read
CPU page tables and populate all pfns/pages of this virtual address
range. For system memory page, dma-mapping is performed
to get a dma-address which can be used later for GPU to access pages.
v1: Address review comments:
separate a npage_in_range function (Matt)
reparameterize function xe_userptr_populate_range function (Matt)
move mmu_interval_read_begin() call into while loop (Thomas)
s/mark_range_accessed/xe_mark_range_accessed (Thomas)
use set_page_dirty_lock (vs set_page_dirty) (Thomas)
move a few checking in xe_vma_userptr_pin_pages to hmm.c (Matt)
v2: Remove device private page support. Only support system
pages for now. use dma-map-sg rather than dma-map-page (Matt/Thomas)
v3: Address review comments:
Squash patch "drm/xe: Introduce a helper to free sg table" to current
patch (Matt)
start and end addresses are already page aligned (Matt)
Do mmap_read_lock and mmap_read_unlock for hmm_range_fault incase of
non system allocator call. (Matt)
Drop kthread_use_mm and kthread_unuse_mm. (Matt)
No need of kernel-doc for static functions.(Matt)
Modify function names. (Matt)
Free sgtable incase of dma_map_sgtable failure.(Matt)
Modify loop for hmm_range_fault.(Matt)
v4: Remove the dummy function for xe_hmm_userptr_populate_range
since CONFIG_HMM_MIRROR is needed. (Matt)
Change variable names start/end to userptr_start/userptr_end.(Matt)
v5: Remove device private page support info from commit message. Since
the patch doesn't support device page handling. (Thomas)
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Co-developed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: Brian Welty <brian.welty@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412095237.1048599-2-himal.prasad.ghimiray@intel.com
|
|
Add a unreference bo in the error path, to prevent leaking a bo ref.
Return 0 on success to clarify the success path.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404090302.68422-1-maarten.lankhorst@linux.intel.com
|
|
This will remove devcoredump from file system and free its resources
during driver unload.
This fix the driver unload after gpu hang happened, otherwise this
it would report that Xe KMD is still in use and it would leave the
kernel in a state that Xe KMD can't be unload without a reboot.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409200206.108452-2-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
It is useful for modules that do not want to keep coredump available
after its unload.
Otherwise, the coredump would only be removed after DEVCD_TIMEOUT
seconds.
v2:
- dev_coredump_put() documentation updated (Mukesh)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409200206.108452-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
A recent change added a use of xe_wa_oob.h without adding the file that
uses it to uses_generated_oob, which means xe_wa_oob.h does not get
properly generated before attempting to build the object file:
LINK resolve_btfids
CC [M] drivers/gpu/drm/xe/xe_guc_ads.o
drivers/gpu/drm/xe/xe_guc_ads.c:10:10: fatal error: generated/xe_wa_oob.h: No such file or directory
10 | #include <generated/xe_wa_oob.h>
| ^~~~~~~~~~~~~~~~~~~~~~~
After adding '$(obj)/xe_guc_ads.o' to uses_generated_oob, xe_wa_oob.h is
always generated before building the file, resulting in no errors:
LINK resolve_btfids
HOSTCC drivers/gpu/drm/xe/xe_gen_wa_oob
GEN xe_wa_oob.c xe_wa_oob.h
CC [M] drivers/gpu/drm/xe/xe_guc_ads.o
Fixes: c151ff5c9053 ("drm/xe/lnl: Enable GuC Wa_14019882105")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410-drm-xe-fix-xe_guc_ads-using-xe_wa_oob-v1-1-441f2d8e5d83@kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
GuC CTB is related to the GT, so best to use xe_gt_assert().
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404193647.759-2-michal.wajdeczko@intel.com
|
|
A platform can have more than one GuC, so we should use GT-oriented
logs to refer to specific GuC.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404193647.759-1-michal.wajdeczko@intel.com
|
|
Lmem init check should be done only after pcode initialization
status is complete. Move lmem init check after pcode status
check. Also wait for a short while after pcode status check
to allow completion of the task.
Failing to do so, can lead to aborting the module load
leaving the system unusable. Wait until the lmem initialization
is complete within a timeout (60s) or till the user aborts.
v2: use bool as return type
re-order the code comment (Rodrigo)
add comment for deferring probe (Himal)
v3: rebase
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410085005.1126343-3-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The root tile indicates the pcode initialization is complete
when all tiles have completed their initialization.
So the mailbox can be polled only on the root tile.
Check pcode init status only on root tile and move it to
device probe early as root tile is initialized there.
Also make similar changes in resume paths.
v2: add lock/unlocked version of pcode_mailbox_rw
to allow pcode init to be called in device
early probe (Rodrigo)
v3: add code description about using root tile
change function names to xe_pcode_probe_early
and xe_pcode_init (Rodrigo)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410085005.1126343-2-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240304090555.716327-2-u.kleine-koenig@pengutronix.de
|
|
Since commit ab78029ecc34 ("drivers/pinctrl: grab default handles from
device core"), we can rely on device core for setting the default pins.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922073714.6164-1-wsa+renesas@sang-engineering.com
|
|
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240330202804.83936-1-krzysztof.kozlowski@linaro.org
|
|
Free "dp" before returning.
Fixes: be318d01a903 ("drm: xlnx: dp: Reset DisplayPort IP")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/86def134-9537-4939-912e-3a424e3a75b6@moroto.mountain
|
|
Add myself as a co-maintainer for Xilinx DRM drivers to help Laurent.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327-xilinx-maintainer-v1-1-c5fdc115f448@ideasonboard.com
|
|
As SR-IOV support varies between platforms and the driver can run
in different SR-IOV modes, add debugfs file with these details.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404154431.583-4-michal.wajdeczko@intel.com
|
|
SR-IOV PF mode detection is based on PCI capability as reported by
the PCI dev_is_pf() function and additionally on 'max_vfs' module
parameter which could be also used to disable PF capability even
if SR-IOV PF capability is reported by the hardware.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404154431.583-3-michal.wajdeczko@intel.com
|
|
We want to have an option to limit the number of the VFs that the
PF driver will be able to manage. With this limit set to zero we
will also have a way to completely disable the PF functionality.
Since we currently don't support SR-IOV on any platform, we start
with this limit set to zero by default.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404154431.583-2-michal.wajdeczko@intel.com
|
|
We may leave pat.ops unset when running on brand new platform or
when running as a VF. While the former is unlikely, the latter
is valid (future) use case and will cause NPD when someone will
try to dump PAT settings by debugfs.
It's better to check pointer to pat.ops instead of specific .dump
hook, as we have this hook always defined for every .ops variant.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409105106.1067-2-michal.wajdeczko@intel.com
|
|
Make sure that pat.ops (if selected) has all required function
pointers setup. Only .program_media may be omitted if we have
older media version.
This should help avoid late runtime checks against individual
function pointers.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409105106.1067-1-michal.wajdeczko@intel.com
|
|
gma_drm.h has become an empty, unused header. Remove.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408104230.3191827-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Define the initial set of workarounds for Xe2_HPM.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170545.3769566-12-balasubramani.vivekanandan@intel.com
|
|
Introduces performance tuning guide changes for Xe_HPG.
v2: Switched to open upper bound for "Tuning: L3 Cache" setting.
BSpec: 72161
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170545.3769566-11-balasubramani.vivekanandan@intel.com
|
|
Add the initial set of Xe2_HPG gt/engine/lrc workarounds.
v2: Removed WA_16020183090 which is no more applicable
Extended WA_18033852989,18034896535 also to xe2hpg
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Dnyaneshar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170545.3769566-10-balasubramani.vivekanandan@intel.com
|
Rodrigo Vivi
Vinay Belgaumkar
Matthew Auld
Lu Yao
John Harrison
Michal Wajdeczko
Francois Dugast
Oak Zeng
Maarten Lankhorst
José Roberto de Souza
Nathan Chancellor
Riana Tauro
Uwe Kleine-König
Wolfram Sang
Krzysztof Kozlowski
Dan Carpenter
Tomi Valkeinen
Jani Nikula
Gustavo Sousa
Shekhar Chauhan
Haridhar Kalvala