| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add Comet Lake H into ishtp support list.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
|
|
The open method of hiddev handler fails to bring the device out of
autosuspend state as was promised in 0361a28d3f9a, as it actually has 2
blocks that try to start the transport (call hid_hw_open()) with both
being guarded by the "open" counter, so the 2nd block is never executed as
the first block increments the counter so it is never at 0 when we check
it for the second block.
Additionally hiddev_open() was leaving counter incremented on errors,
causing the device to never be reopened properly if there was ever an
error.
Let's fix all of this by factoring out code that creates client structure
and powers up the device into a separate function that is being called
from usbhid_open() with the "existancelock" being held.
Fixes: 0361a28d3f9a ("HID: autosuspend support for USB HID")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
|
|
We should not be leaving half-mapped usages with potentially invalid
keycodes, as that may confuse hidinput_find_key() when the key is located
by index, which may end up feeding way too large keycode into the VT
keyboard handler and cause OOB write there:
BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline]
BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
Write of size 8 at addr ffffffff89a1b2d8 by task syz-executor108/1722
...
kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118
input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145
input_pass_values drivers/input/input.c:949 [inline]
input_set_keycode+0x290/0x320 drivers/input/input.c:954
evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882
evdev_do_ioctl drivers/input/evdev.c:1150 [inline]
Cc: stable@vger.kernel.org
Reported-by: syzbot+19340dff067c2d3835c0@syzkaller.appspotmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Apply it to the Lenovo Y720 gaming laptop I2C peripheral then.
This fixes dmesg being flooded with errors visible on un-suspend
in Linux Mint 19 Cinnamon.
Example of error log:
<...>
[ 4.326588] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
[ 4.326845] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
[ 4.327095] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
[ 4.327341] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
[ 4.327609] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4)
<...>
Example of fixed log (debug on)
<...>
[ 3731.333183] i2c_hid i2c-ITE33D1:00: input: 02 00
[ 3731.333581] i2c_hid i2c-ITE33D1:00: input: 02 00
[ 3731.333842] i2c_hid i2c-ITE33D1:00: input: 02 00
[ 3731.334107] i2c_hid i2c-ITE33D1:00: input: 02 00
[ 3731.334367] i2c_hid i2c-ITE33D1:00: input: 02 00
<...>
[jkosina@suse.cz: rebase onto more recent codebase]
Signed-off-by: Pavel Balan <admin@kryma.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
At least on a T100HA an Asus vendor-page usage-code 0xff event is send on
every suspend and again on resume, resulting in the following warning:
asus 0003:0B05:1807.0002: Unmapped Asus vendor usagepage code 0xff
being logged twice on every suspend/resume.
This commit silences the "Unmapped Asus vendor usagepage code ..."
warning for usage-code 0xff to avoid these warnings being logged.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The Acer SW5-012 2-in-1 keyboard dock uses a Synaptics S91028 touchpad
which is connected to an ITE 8595 USB keyboard controller chip.
This keyboard has the same quirk for its rfkill / airplane mode hotkey as
other keyboards with the ITE 8595 chip, it only sends a single release
event when pressed and released, it never sends a press event.
This commit adds this keyboards USB id to the hid-ite id-table, fixing
the rfkill key not working on this keyboard.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Without the quirk, joystick shows up as single controller
for both first and second player pads/pins.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The syzbot fuzzer found a slab-out-of-bounds bug in the HID report
handler. The bug was caused by a report descriptor which included a
field with size 12 bits and count 4899, for a total size of 7349
bytes.
The usbhid driver uses at most a single-page 4-KB buffer for reports.
In the test there wasn't any problem about overflowing the buffer,
since only one byte was received from the device. Rather, the bug
occurred when the HID core tried to extract the data from the report
fields, which caused it to try reading data beyond the end of the
allocated buffer.
This patch fixes the problem by rejecting any report whose total
length exceeds the HID_MAX_BUFFER_SIZE limit (minus one byte to allow
for a possible report index). In theory a device could have a report
longer than that, but if there was such a thing we wouldn't handle it
correctly anyway.
Reported-and-tested-by: syzbot+09ef48aa58261464b621@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add multitouch support for LG MELF I2C touchscreen.
Apply the same workaround as LG USB touchscreen.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Always return EPOLLOUT from uhid_char_poll to allow polling /dev/uhid
for writable state.
Fixes: 1f9dec1e0164 ("HID: uhid: allow poll()'ing on uhid devices")
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
When polling a connected /dev/hidrawX device, it is useful to get the
EPOLLOUT when writing is possible. Since writing is possible as soon as
the device is connected, always return it.
Right now EPOLLOUT is only returned when there are also input reports
are available. This works if devices start sending reports when
connected, but some HID devices might need an output report first before
sending any input reports. This change will allow using EPOLLOUT here as
well.
Fixes: 378b80370aa1 ("hidraw: Return EPOLLOUT from hidraw_poll")
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Commit f2bb86937d86 ("powerpc/fixmap: don't clear fixmap area in
paging_init()") removed the clearing of fixmap area in order to
avoid clearing fixmapped areas set earlier.
However unlike all other users of fixmap which use __set_fixmap(),
HIGHMEM functions directly use __set_pte_at(). This means
the page table must pre-exist, otherwise the following crash
can be encoutered due to the lack of entry in the PGD.
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K MMU=Hash PowerMac
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.0+ #2528
NIP: c0144ce8 LR: c0144ccc CTR: 00000080
REGS: ef0b5aa0 TRAP: 0300 Not tainted (5.4.0+)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 44282842 XER: 00000000
DAR: fffdf000 DSISR: 42000000
GPR00: c0144ccc ef0b5b58 ef0b0000 fffdf000 fffdf000 00000000 c0000f7c 00000000
GPR08: c0833000 fffdf000 00000000 ef1c53c9 24042842 00000000 00000000 00000000
GPR16: 00000000 00000000 ef7e7358 effe8160 00000000 c08a9660 c0851644 00000004
GPR24: c08c70a8 00002dc2 00000000 00000001 00000201 effe8160 effe8160 00000000
NIP [c0144ce8] prep_new_page+0x138/0x178
LR [c0144ccc] prep_new_page+0x11c/0x178
Call Trace:
[ef0b5b58] [c0144ccc] prep_new_page+0x11c/0x178 (unreliable)
[ef0b5b88] [c0147218] get_page_from_freelist+0x1fc/0xd88
[ef0b5c38] [c0148328] __alloc_pages_nodemask+0xd4/0xbb4
[ef0b5cf8] [c0142ba8] __vmalloc_node_range+0x1b4/0x2e0
[ef0b5d38] [c0142dd0] vzalloc+0x48/0x58
[ef0b5d58] [c0301c8c] check_partition+0x58/0x244
[ef0b5d78] [c02ffe80] blk_add_partitions+0x44/0x2cc
[ef0b5db8] [c01a32d8] bdev_disk_changed+0x68/0xfc
[ef0b5de8] [c01a4494] __blkdev_get+0x290/0x460
[ef0b5e28] [c02fdd40] __device_add_disk+0x480/0x4d8
[ef0b5e68] [c0810688] brd_init+0xc0/0x188
[ef0b5e88] [c0005194] do_one_initcall+0x40/0x19c
[ef0b5ee8] [c07dd4dc] kernel_init_freeable+0x164/0x230
[ef0b5f28] [c0005408] kernel_init+0x18/0x10c
[ef0b5f38] [c0014274] ret_from_kernel_thread+0x14/0x1c
Partially revert that commit to still clear the fixmap area dedicated
to HIGHMEM.
Fixes: f2bb86937d86 ("powerpc/fixmap: don't clear fixmap area in paging_init()")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d42fa9747df5afa41e67b08e374c98d3b40529c9.1574927918.git.christophe.leroy@c-s.fr
|
|
commit ad723674d675 ("x86/efi: move common keyring handler functions
to new file") leave this unused.
Fixes: ad723674d675 ("x86/efi: move common keyring handler functions to new file")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20191115130830.13320-1-yuehaibing@huawei.com
|
|
While writing to MSR IA32_THERM_STATUS/IA32_PKG_THERM_STATUS, avoid
writing 1 to read only and reserved fields because updating some fields
generates exception.
[ bp: Vertically align for better readability. ]
Fixes: f6656208f04e ("x86/mce/therm_throt: Optimize notifications of thermal throttle")
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Tested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191128150824.22413-1-srinivas.pandruvada@linux.intel.com
|
|
Fix below build warning
WARNING: modpost: missing MODULE_LICENSE() in
drivers/pinctrl/pinctrl-equilibrium.o
Introduced by commit
1948d5c51dba ("pinctrl: Add pinmux & GPIO controller driver for a new SoC")
by adding missing MODULE_LICENSE.
Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Link: https://lore.kernel.org/r/20191128080832.13529-2-rahul.tanwar@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This patch corrects the SPDX License Identifier style in
header files related to drivers for USB Network devices.
This patch gives an explicit block comment to the
SPDX License Identifier.
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch corrects the SPDX License Identifier style in
header files related to PHY Layer for Ethernet drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used). This patch also gives an explicit
block comment to the SPDX License Identifier.
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in
napi_gro_receive()") has applied batched GRO_NORMAL packets processing
to all napi_gro_receive() users, including mac80211-based drivers.
However, this change has led to a regression in iwlwifi driver [1][2] as
it is required for NAPI users to call napi_complete_done() or
napi_complete() and the end of every polling iteration, whilst iwlwifi
doesn't use NAPI scheduling at all and just calls napi_gro_flush().
In that particular case, packets which have not been already flushed
from napi->rx_list stall in it until at least next Rx cycle.
Fix this by adding a manual flushing of the list to iwlwifi driver right
before napi_gro_flush() call to mimic napi_complete() logics.
I prefer to open-code gro_normal_list() rather than exporting it for 2
reasons:
* to prevent from using it and napi_gro_flush() in any new drivers,
as it is the *really* bad way to use NAPI that should be avoided;
* to keep gro_normal_list() static and don't lose any CC optimizations.
I also don't add the "Fixes:" tag as the mentioned commit was only a
trigger that only exposed an improper usage of NAPI in this particular
driver.
[1] https://lore.kernel.org/netdev/PSXP216MB04388962C411CD0B17A86F47804A0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM
[2] https://bugzilla.kernel.org/show_bug.cgi?id=205647
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Tested-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert to use skb queue instead of the list of skbs.
The skb queue could provide protection with lock.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Break the matching loop when find the matching skb for TX timestamp.
This is to avoid consuming more skbs incorrectly. The timestamp ID
is from 0 to 3 while the FIFO could support 128 timestamps at most.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We accidentally messed up the indenting on this if statement.
Fixes: 16c696a6c300 ("CIFS: refactor cifs_get_inode_info()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Under certain circumstances, we hit a warning in lockdep_register_key:
if (WARN_ON_ONCE(static_obj(key)))
return;
This occurs when the key falls into initmem that has since been freed
and can now be reused. This has been observed on boot, and under
memory pressure.
Define arch_is_kernel_initmem_freed(), which allows lockdep to
correctly identify this memory as dynamic.
This fixes a bug picked up by the powerpc64 syzkaller instance where
we hit the WARN via alloc_netdev_mqs.
Reported-by: Qian Cai <cai@lca.pw>
Reported-by: ppc syzbot c/o Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/87lfs4f7d6.fsf@dja-thinkpad.axtens.net
|
|
In gve_alloc_queue_page_list(), when a page allocation fails,
qpl->num_entries will be wrong. In this case priv->num_registered_pages
can underflow in gve_free_queue_page_list(), causing subsequent calls
to gve_alloc_queue_page_list() to fail.
Fixes: f5cedc84a30d ("gve: Add transmit and receive support")
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Any argument outside of that range would result in an out of bound
memory access, since the accessed array is 65536 bits long.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When user-space sets the OVS_UFID_F_OMIT_* flags, and the relevant
flow has no UFID, we can exceed the computed size, as
ovs_nla_put_identifier() will always dump an OVS_FLOW_ATTR_KEY
attribute.
Take the above in account when computing the flow command message
size.
Fixes: 74ed7ab9264c ("openvswitch: Add support for unique flow IDs.")
Reported-by: Qi Jun Ding <qding@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the return paths for all I/O operations to ensure
that the I/O completed successfully. Then pass the return
to the caller for further processing
Fixes: 01db923e8377 ("net: phy: dp83869: Add TI dp83869 phy")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to calculate the skb size correctly otherwise we risk triggering
skb_over_panic[1]. The issue is that data_len is added to the skb in a
nl attribute, but we don't account for its header size (nlattr 4 bytes)
and alignment. We account for it when calculating the total size in
the > PSAMPLE_MAX_PACKET_SIZE comparison correctly, but not when
allocating after that. The fix is simple - use nla_total_size() for
data_len when allocating.
To reproduce:
$ tc qdisc add dev eth1 clsact
$ tc filter add dev eth1 egress matchall action sample rate 1 group 1 trunc 129
$ mausezahn eth1 -b bcast -a rand -c 1 -p 129
< skb_over_panic BUG(), tail is 4 bytes past skb->end >
[1] Trace:
[ 50.459526][ T3480] skbuff: skb_over_panic: text:(____ptrval____) len:196 put:136 head:(____ptrval____) data:(____ptrval____) tail:0xc4 end:0xc0 dev:<NULL>
[ 50.474339][ T3480] ------------[ cut here ]------------
[ 50.481132][ T3480] kernel BUG at net/core/skbuff.c:108!
[ 50.486059][ T3480] invalid opcode: 0000 [#1] PREEMPT SMP
[ 50.489463][ T3480] CPU: 3 PID: 3480 Comm: mausezahn Not tainted 5.4.0-rc7 #108
[ 50.492844][ T3480] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
[ 50.496551][ T3480] RIP: 0010:skb_panic+0x79/0x7b
[ 50.498261][ T3480] Code: bc 00 00 00 41 57 4c 89 e6 48 c7 c7 90 29 9a 83 4c 8b 8b c0 00 00 00 50 8b 83 b8 00 00 00 50 ff b3 c8 00 00 00 e8 ae ef c0 fe <0f> 0b e8 2f df c8 fe 48 8b 55 08 44 89 f6 4c 89 e7 48 c7 c1 a0 22
[ 50.504111][ T3480] RSP: 0018:ffffc90000447a10 EFLAGS: 00010282
[ 50.505835][ T3480] RAX: 0000000000000087 RBX: ffff888039317d00 RCX: 0000000000000000
[ 50.507900][ T3480] RDX: 0000000000000000 RSI: ffffffff812716e1 RDI: 00000000ffffffff
[ 50.509820][ T3480] RBP: ffffc90000447a60 R08: 0000000000000001 R09: 0000000000000000
[ 50.511735][ T3480] R10: ffffffff81d4f940 R11: 0000000000000000 R12: ffffffff834a22b0
[ 50.513494][ T3480] R13: ffffffff82c10433 R14: 0000000000000088 R15: ffffffff838a8084
[ 50.515222][ T3480] FS: 00007f3536462700(0000) GS:ffff88803eac0000(0000) knlGS:0000000000000000
[ 50.517135][ T3480] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 50.518583][ T3480] CR2: 0000000000442008 CR3: 000000003b222000 CR4: 00000000000006e0
[ 50.520723][ T3480] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 50.522709][ T3480] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 50.524450][ T3480] Call Trace:
[ 50.525214][ T3480] skb_put.cold+0x1b/0x1b
[ 50.526171][ T3480] psample_sample_packet+0x1d3/0x340
[ 50.527307][ T3480] tcf_sample_act+0x178/0x250
[ 50.528339][ T3480] tcf_action_exec+0xb1/0x190
[ 50.529354][ T3480] mall_classify+0x67/0x90
[ 50.530332][ T3480] tcf_classify+0x72/0x160
[ 50.531286][ T3480] __dev_queue_xmit+0x3db/0xd50
[ 50.532327][ T3480] dev_queue_xmit+0x18/0x20
[ 50.533299][ T3480] packet_sendmsg+0xee7/0x2090
[ 50.534331][ T3480] sock_sendmsg+0x54/0x70
[ 50.535271][ T3480] __sys_sendto+0x148/0x1f0
[ 50.536252][ T3480] ? tomoyo_file_ioctl+0x23/0x30
[ 50.537334][ T3480] ? ksys_ioctl+0x5e/0xb0
[ 50.540068][ T3480] __x64_sys_sendto+0x2a/0x30
[ 50.542810][ T3480] do_syscall_64+0x73/0x1f0
[ 50.545383][ T3480] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 50.548477][ T3480] RIP: 0033:0x7f35357d6fb3
[ 50.551020][ T3480] Code: 48 8b 0d 18 90 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 d3 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 eb f6 ff ff 48 89 04 24
[ 50.558547][ T3480] RSP: 002b:00007ffe0c7212c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 50.561870][ T3480] RAX: ffffffffffffffda RBX: 0000000001dac010 RCX: 00007f35357d6fb3
[ 50.565142][ T3480] RDX: 0000000000000082 RSI: 0000000001dac2a2 RDI: 0000000000000003
[ 50.568469][ T3480] RBP: 00007ffe0c7212f0 R08: 00007ffe0c7212d0 R09: 0000000000000014
[ 50.571731][ T3480] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000082
[ 50.574961][ T3480] R13: 0000000001dac2a2 R14: 0000000000000001 R15: 0000000000000003
[ 50.578170][ T3480] Modules linked in: sch_ingress virtio_net
[ 50.580976][ T3480] ---[ end trace 61a515626a595af6 ]---
CC: Yotam Gigi <yotamg@mellanox.com>
CC: Jiri Pirko <jiri@mellanox.com>
CC: Jamal Hadi Salim <jhs@mojatatu.com>
CC: Simon Horman <simon.horman@netronome.com>
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
Fixes: 6ae0a6286171 ("net: Introduce psample, a new genetlink channel for packet sampling")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
correct usage prototype of callback in tasklet_init().
Report by https://github.com/KSPP/linux/issues/20
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
correct usage prototype of callback in tasklet_init().
Report by https://github.com/KSPP/linux/issues/20
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the quest to bring io_kiocb down to 3 cachelines, this one does
the trick. Make the wait_queue_entry for the poll command come out
of kmalloc instead of embedding it in struct io_poll_iocb, as the
latter is the largest member of io_kiocb. Once we trim this down a
bit, we're back at a healthy 192 bytes for struct io_kiocb.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently we're using 40 bytes for the io_wq_work structure, and 16 of
those is the doubly link list node. We don't need doubly linked lists,
we always add to tail to keep things ordered, and any other use case
is list traversal with deletion. For the deletion case, we can easily
support any node deletion by keeping track of the previous entry.
This shrinks io_wq_work to 32 bytes, and subsequently io_kiock from
io_uring to 216 to 208 bytes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are several things that can go wrong in the current code on NUMA
systems, especially if not all nodes are online all the time:
- If the identifiers of the online nodes do not form a single contiguous
block starting at zero, wq->wqes will be too small, and OOB memory
accesses will occur e.g. in the loop in io_wq_create().
- If a node comes online between the call to num_online_nodes() and the
for_each_node() loop in io_wq_create(), an OOB write will occur.
- If a node comes online between io_wq_create() and io_wq_enqueue(), a
lookup is performed for an element that doesn't exist, and an OOB read
will probably occur.
Fix it by:
- using nr_node_ids instead of num_online_nodes() for the allocation size;
nr_node_ids is calculated by setup_nr_node_ids() to be bigger than the
highest node ID that could possibly come online at some point, even if
those nodes' identifiers are not a contiguous block
- creating workers for all possible CPUs, not just all online ones
This is basically what the normal workqueue code also does, as far as I can
tell.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
These allocations are single-element allocations, so don't use the array
allocation wrapper for them.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Clean io_import_fixed() call site and make it return proper type.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no point left in keeping struct sqe_submit. Inline it
into struct io_kiocb, so any req->submit.field is now just req->field
- moves initialisation of ring_file into io_get_req()
- removes duplicated req->sequence.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Timeouts' sequence offset (i.e. sqe->off) is stored in
req->submit.sequence under a false name. Keep it in timeout.data
instead. The unused space for sequence will be reclaimed in the
following patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Only io_uring uses (and added) these, and we want to disallow the
use of sendmsg/recvmsg for anything but regular data transfers.
Use the newly added prep helper to split the msghdr copy out from
the core function, to check for msg_control and msg_controllen
settings. If either is set, we return -EINVAL.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is in preparation for enabling the io_uring helpers for sendmsg
and recvmsg to first copy the header for validation before continuing
with the operation.
There should be no functional changes in this patch.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Note that the sysctl write accessor functions guarantee that:
net->ipv4.sysctl_ip_prot_sock <= net->ipv4.ip_local_ports.range[0]
invariant is maintained, and as such the max() in selinux hooks is actually spurious.
ie. even though
if (snum < max(inet_prot_sock(sock_net(sk)), low) || snum > high) {
per logic is the same as
if ((snum < inet_prot_sock(sock_net(sk)) && snum < low) || snum > high) {
it is actually functionally equivalent to:
if (snum < low || snum > high) {
which is equivalent to:
if (snum < inet_prot_sock(sock_net(sk)) || snum < low || snum > high) {
even though the first clause is spurious.
But we want to hold on to it in case we ever want to change what what
inet_port_requires_bind_service() means (for example by changing
it from a, by default, [0..1024) range to some sort of set).
Test: builds, git 'grep inet_prot_sock' finds no other references
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Provide some serialization for device CRQ commands
and queries to ensure that the shared variable used for
storing return codes is properly synchronized.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create a wrapper for wait_for_completion calls with additional
driver checks to ensure that the driver does not wait on a
disabled device. In those cases or if the device does not respond
in an extended amount of time, this will allow the driver an
opportunity to recover.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we receive a notification that the device has been deactivated
or removed, force a completion of all waiting threads.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix multiple calls to init_completion for device completion
structures. Instead, initialize them during device probe and
reinitialize them later as needed.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It already existed in part of the function, but move it
to a higher level and use it consistently throughout.
Safe since sk is never written to.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It cannot overlap with the local port range - ie. with autobind selectable
ports - and not with reserved ports.
Indeed 'ip_local_reserved_ports' isn't even a range, it's a (by default
empty) set.
Fixes: 4548b683b781 ("Introduce a sysctl that modifies the value of PROT_SOCK.")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the following commit:
05b042a19443: ("x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise")
'struct cpu_entry_area' has to be Kconfig invariant, so that we always
have a matching CPU_ENTRY_AREA_PAGES size.
This commit added a CONFIG_X86_IOPL_IOPERM dependency to tss_struct:
111e7b15cf10: ("x86/ioperm: Extend IOPL config to control ioperm() as well")
Which, if CONFIG_X86_IOPL_IOPERM is turned off, reduces the size of
cpu_entry_area by two pages, triggering the assert:
./include/linux/compiler.h:391:38: error: call to ‘__compiletime_assert_202’ declared with attribute error: BUILD_BUG_ON failed: (CPU_ENTRY_AREA_PAGES+1)*PAGE_SIZE != CPU_ENTRY_AREA_MAP_SIZE
Simplify the Kconfig dependencies and make cpu_entry_area constant
size on 32-bit kernels again.
Fixes: 05b042a19443: ("x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This reverts commit 0be0ee71816b2b6725e2b4f32ad6726c9d729777.
I was hoping it would be benign to switch over entirely to FMODE_STREAM,
and we'd have just a couple of small fixups we'd need, but it looks like
we're not quite there yet.
While it worked fine on both my desktop and laptop, they are fairly
similar in other respects, and run mostly the same loads. Kenneth
Crudup reports that it seems to break both his vmware installation and
the KDE upower service. In both cases apparently leading to timeouts
due to waitinmg for the f_pos lock.
There are a number of character devices in particular that definitely
want stream-like behavior, but that currently don't get marked as
streams, and as a result get the exclusion between concurrent
read()/write() on the same file descriptor. Which doesn't work well for
them.
The most obvious example if this is /dev/console and /dev/tty, which use
console_fops and tty_fops respectively (and ptmx_fops for the pty master
side). It may be that it's just this that causes problems, but we
clearly weren't ready yet.
Because there's a number of other likely common cases that don't have
llseek implementations and would seem to act as stream devices:
/dev/fuse (fuse_dev_operations)
/dev/mcelog (mce_chrdev_ops)
/dev/mei0 (mei_fops)
/dev/net/tun (tun_fops)
/dev/nvme0 (nvme_dev_fops)
/dev/tpm0 (tpm_fops)
/proc/self/ns/mnt (ns_file_operations)
/dev/snd/pcm* (snd_pcm_f_ops[])
and while some of these could be trivially automatically detected by the
vfs layer when the character device is opened by just noticing that they
have no read or write operations either, it often isn't that obvious.
Some character devices most definitely do use the file position, even if
they don't allow seeking: the firmware update code, for example, uses
simple_read_from_buffer() that does use f_pos, but doesn't allow seeking
back and forth.
We'll revisit this when there's a better way to detect the problem and
fix it (possibly with a coccinelle script to do more of the FMODE_STREAM
annotations).
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This system call has been deprecated almost since it was introduced, and
in a survey of the linux distributions I can no longer find any of them
that enable CONFIG_SYSCTL_SYSCALL. The only indication that I can find
that anyone might care is that a few of the defconfigs in the kernel
enable CONFIG_SYSCTL_SYSCALL. However this appears in only 31 of 414
defconfigs in the kernel, so I suspect this symbols presence is simply
because it is harmless to include rather than because it is necessary.
As there appear to be no users of the sysctl system call, remove the
code. As this removes one of the few uses of the internal kernel mount
of proc I hope this allows for even more simplifications of the proc
filesystem.
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Anders Berg <anders.berg@lsi.com>
Cc: Apelete Seketeli <apelete@seketeli.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chee Nouk Phoon <cnphoon@altera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hongliang Tao <taohl@lemote.com>
Cc: Hua Yan <yanh@lemote.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Kevin Wells <kevin.wells@nxp.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Scott Telford <stelford@cadence.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
In commit 4f07b80c9733 ("tipc: check msg->req data len in
tipc_nl_compat_bearer_disable") the same patch code was copied into
routines: tipc_nl_compat_bearer_disable(),
tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats().
The two link routine occurrences should have been modified to check
the maximum link name length and not bearer name length.
Fixes: 4f07b80c9733 ("tipc: check msg->reg data len in tipc_nl_compat_bearer_disable")
Signed-off-by: John Rutherford <john.rutherford@dektech.com.au>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RCLK is a fixed 50MHz clock derived from HPLL that is described by a
single gate for each MAC.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lkml.kernel.org/r/20191010020655.3776-3-andrew@aj.id.au
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
Even Xu
Dmitry Torokhov
Pavel Balan
Hans de Goede
Priit Laes
Alan Stern
Aaron Ma
Marcel Holtmann
Christophe Leroy
YueHaibing
Srinivas Pandruvada
Rahul Tanwar
Nishad Kamdar
Alexander Lobakin
Yangbo Lu
Dan Carpenter via samba-technical
Michael Ellerman
Jeroen de Borst
Maciej Żenczykowski
Paolo Abeni
Dan Murphy
Nikolay Aleksandrov
Phong Tran
Jens Axboe
Jann Horn
Pavel Begunkov
Thomas Falcon
Ingo Molnar
Linus Torvalds
Eric W. Biederman
John Rutherford
Andrew Jeffery