| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
BeagleBoard.org BeaglePlay is an easy to use, affordable open source
hardware single board computer based on the Texas Instruments AM625
SoC that allows you to create connected devices that work even at long
distances using IEEE 802.15.4g LR-WPAN and IEEE 802.3cg 10Base-T1L.
Expansion is provided over open standards based mikroBUS, Grove and
QWIIC headers among other interfaces.
This board family can be identified by the 24c32 eeprom:
[aa 55 33 ee 01 37 00 10 2e 00 42 45 41 47 4c 45 |.U3..7....BEAGLE|]
[50 4c 41 59 2d 41 30 2d 00 00 30 32 30 30 37 38 |PLAY-A0-..020078|]
https://beagleplay.org/
https://git.beagleboard.org/beagleplay/beagleplay
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230316152143.2438928-3-nm@ti.com
Co-developed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
This board is based on ti,am625
https://beagleplay.org/
https://git.beagleboard.org/beagleplay/beagleplay
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230316152143.2438928-2-nm@ti.com
Co-developed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The J7 Quad Port Add-On Ethernet Card for J7200 Common-Proc-Board supports
QSGMII mode. Use the overlay to configure CPSW5G ports in QSGMII mode.
Add support to reset the PHY from kernel by using gpio-hog and gpio-reset.
Add aliases for CPSW5G ports to enable kernel to fetch MAC addresses
directly from U-Boot.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230315062307.1612220-5-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
TI's J7200 SoC has a 5 port Ethernet Switch instance with 4 external
ports and 1 host port, referred to as CPSW5G.
Add device-tree nodes for CPSW5G and disable it by default. Device-tree
overlays will be used to enable it.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230315062307.1612220-4-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The J7 Quad Port Add-On Ethernet Card for J721E Common-Proc-Board supports
QSGMII mode. Use the overlay to configure CPSW9G ports in QSGMII mode.
Add support to reset the PHY from kernel by using gpio-hog and gpio-reset.
Add aliases for CPSW9G ports to enable kernel to fetch MAC addresses
directly from U-Boot.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230315062307.1612220-3-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
TI's J721E SoC has a 9 port Ethernet Switch instance with 8 external
ports and 1 host port, referred to as CPSW9G.
Add device-tree nodes for CPSW9G and disable it by default. Device-tree
overlays will be used to enable it.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230315062307.1612220-2-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add device tree support to enable MCU CPSW with J784S4 EVM.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230315042548.1500528-1-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
J721s2 has two instances of 8 channel ADCs in MCU domain. Add pinmux
information for both ADC nodes.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230316095146.498999-3-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add nodes for watchdogs :
- 5 in main domain
- 1 in MCU domain
- 1 in wakeup domain
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230320165123.80561-3-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Introduce digital RTC node in wakeup domain. Even though this has
no specific battery backup supply, this on-chip RTC is used in
cost-optimized board designs as a wakeup source.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230320165123.80561-2-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
J721s2 has two instances of 8 channel ADCs in MCU domain. Add support
for both ADC nodes.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230316095146.498999-2-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add the node for SA2UL to support hardware crypto algorithms,
including SHA-1/256/512, AES, 3DES and AEAD suites.
Add rng node for hardware random number generator.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Link: https://lore.kernel.org/r/20230314152611.140969-3-j-choudhary@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
For convenience (less code duplication), the pin controller pin
configuration register values were defined in the bindings header.
These are not some IDs or other abstraction layer but raw numbers used
in the registers.
These constants do not fit the purpose of bindings. They do not
provide any abstraction, any hardware and driver independent ID. In
fact, the Linux pinctrl-single driver actually do not use the bindings
header at all.
All of the constants were moved already to headers local to DTS
(residing in DTS directory), so remove any references to the bindings
header and add a warning that it is deprecated.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/linux-arm-kernel/71c7feff-4189-f12f-7353-bce41a61119d@linaro.org/
Link: https://lore.kernel.org/r/20230315155228.1566883-4-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The DTS uses hardware register values directly in pin controller pin
configuration and not an abstraction of any form.
These definitions were previously put in the bindings header to avoid
code duplication and to provide some context meaning (name), but they
do not fit the purpose of bindings.
Store the constants in a header next to DTS and use them instead of
bindings.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/c4d53e9c-dac0-8ccc-dc86-faada324beba@linaro.org/
Link: https://lore.kernel.org/r/20230315155228.1566883-3-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Drop the pinmux header reference as it is not used. Examples should
just show the node definition.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230315155228.1566883-2-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The firmware name for this core should stay as the default name
"j7-main-r5f0_0-fw". This is expected to by a symlink to the actual
firmware file. If one wants to use a different firmware they should
change where the symlink points. This is usually achieved with
an update-alternative or other distro specific selection mechanisms.
The actual selection is policy and does not belong in DT.
Remove this name override.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230307180942.2719-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Per AM62Ax SoC datasheet[0] L2 cache is 512KB.
[0] https://www.ti.com/lit/gpn/am62a7 Page 1.
Fixes: 5fc6b1b62639 ("arm64: dts: ti: Introduce AM62A7 family of SoCs")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230320044935.2512288-2-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Per AM62x SoC datasheet[0] L2 cache is 512KB.
[0] https://www.ti.com/lit/gpn/am625 Page 1.
Fixes: f1d17330a5be ("arm64: dts: ti: Introduce base support for AM62x SoC")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230320044935.2512288-1-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
TISCI device ID for main_navss and mcu_navss nodes are missing in
the device tree. Add them.
Fixes: 4664ebd8346a ("arm64: dts: ti: Add initial support for J784S4 SoC")
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Link: https://lore.kernel.org/r/20230314152611.140969-2-j-choudhary@ti.com
|
|
According to latest errata of J721e [1], (i2024) 'MMCSD: Peripherals
Do Not Support HS400' which applies to MMCSD0 subsystem. Speed modes
supported has been already updated but missed dropping 'ti,strobe-sel'
property which is only required by HS400 speed mode.
Thus, drop 'ti,strobe-sel' property from kernel dtsi for J721e SoC.
[1] https://www.ti.com/lit/er/sprz455/sprz455.pdf
Fixes: eb8f6194e807 ("arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Diwakar Dhyani <d-dhyani@ti.com>
Reviewed-by: Nitin Yadav <n-yadav@ti.com>
Link: https://lore.kernel.org/r/20230203073724.29529-1-b-kapoor@ti.com
|
|
All revisions of AM62A7-SK board have 4GB LPDDR4 Micron
MT53E2G32D4DE-046 AUT:B memory. Commit 38c4a08c820c ("arm64: dts: ti:
Add support for AM62A7-SK") enabled just 2GB due to a schematics error
in early revision of the board. Fix it by enabling full 4GB available on
the platform.
Design docs: https://www.ti.com/lit/zip/sprr459
Fixes: 38c4a08c820c ("arm64: dts: ti: Add support for AM62A7-SK")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230314094645.3411599-1-devarsht@ti.com
|
|
Fix number of gpio pins in main_gpio0 & main_gpio1
DT nodes according to AM62x SK datasheet. The Link
of datasheet is in the following line:
https://www.ti.com/lit/ds/symlink/am625.pdf?ts=1673852494660
Section: 6.3.10 GPIO (Page No. 63-67)
Fixes: f1d17330a5be ("arm64: dts: ti: Introduce base support for AM62x SoC")
Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230202085917.3044567-1-n-yadav@ti.com
|
|
|
|
Commit aa47a7c215e7 ("lib/cpumask: deprecate nr_cpumask_bits") resulted
in the cpumask operations potentially becoming hugely less efficient,
because suddenly the cpumask was always considered to be variable-sized.
The optimization was then later added back in a limited form by commit
6f9c07be9d02 ("lib/cpumask: add FORCE_NR_CPUS config option"), but that
FORCE_NR_CPUS option is not useful in a generic kernel and more of a
special case for embedded situations with fixed hardware.
Instead, just re-introduce the optimization, with some changes.
Instead of depending on CPUMASK_OFFSTACK being false, and then always
using the full constant cpumask width, this introduces three different
cpumask "sizes":
- the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids.
This is used for situations where we should use the exact size.
- the "small" size (small_cpumask_bits) is the NR_CPUS constant if it
fits in a single word and the bitmap operations thus end up able
to trigger the "small_const_nbits()" optimizations.
This is used for the operations that have optimized single-word
cases that get inlined, notably the bit find and scanning functions.
- the "large" size (large_cpumask_bits) is the NR_CPUS constant if it
is an sufficiently small constant that makes simple "copy" and
"clear" operations more efficient.
This is arbitrarily set at four words or less.
As a an example of this situation, without this fixed size optimization,
cpumask_clear() will generate code like
movl nr_cpu_ids(%rip), %edx
addq $63, %rdx
shrq $3, %rdx
andl $-8, %edx
callq memset@PLT
on x86-64, because it would calculate the "exact" number of longwords
that need to be cleared.
In contrast, with this patch, using a MAX_CPU of 64 (which is quite a
reasonable value to use), the above becomes a single
movq $0,cpumask
instruction instead, because instead of caring to figure out exactly how
many CPU's the system has, it just knows that the cpumask will be a
single word and can just clear it all.
Note that this does end up tightening the rules a bit from the original
version in another way: operations that set bits in the cpumask are now
limited to the actual nr_cpu_ids limit, whereas we used to do the
nr_cpumask_bits thing almost everywhere in the cpumask code.
But if you just clear bits, or scan for bits, we can use the simpler
compile-time constants.
In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()'
which were not useful, and which fundamentally have to be limited to
'nr_cpu_ids'. Better remove them now than have somebody introduce use
of them later.
Of course, on x86-64 with MAXSMP there is no sane small compile-time
constant for the cpumask sizes, and we end up using the actual CPU bits,
and will generate the above kind of horrors regardless. Please don't
use MAXSMP unless you really expect to have machines with thousands of
cores.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
include/linux/compiler-intel.h had no update in the past 3 years.
We often forget about the third C compiler to build the kernel.
For example, commit a0a12c3ed057 ("asm goto: eradicate CC_HAS_ASM_GOTO")
only mentioned GCC and Clang.
init/Kconfig defines CC_IS_GCC and CC_IS_CLANG but not CC_IS_ICC,
and nobody has reported any issue.
I guess the Intel Compiler support is broken, and nobody is caring
about it.
Harald Arnesen pointed out ICC (classic Intel C/C++ compiler) is
deprecated:
$ icc -v
icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is
deprecated and will be removed from product release in the second half
of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended
compiler moving forward. Please transition to use this compiler. Use
'-diag-disable=10441' to disable this message.
icc version 2021.7.0 (gcc version 12.1.0 compatibility)
Arnd Bergmann provided a link to the article, "Intel C/C++ compilers
complete adoption of LLVM".
lib/zstd/common/compiler.h and lib/zstd/compress/zstd_fast.c were kept
untouched for better sync with https://github.com/facebook/zstd
Link: https://www.intel.com/content/www/us/en/developer/articles/technical/adoption-of-llvm-complete-icx.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The migration code ends up temporarily stashing information of the wrong
type in unused fields of the newly allocated destination folio. That
all works fine, but gcc does complain about the pointer type mis-use:
mm/migrate.c: In function ‘__migrate_folio_extract’:
mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’
1050 | *anon_vmap = (void *)dst->mapping;
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
and gcc is actually right to complain since it really doesn't understand
that this is a very temporary special case where this is ok.
This could be fixed in different ways by just obfuscating the assignment
sufficiently that gcc doesn't see what is going on, but the truly
"proper C" way to do this is by explicitly using a union.
Using unions for type conversions like this is normally hugely ugly and
syntactically nasty, but this really is one of the few cases where we
want to make it clear that we're not doing type conversion, we're really
re-using the value bit-for-bit just using another type.
IOW, this should not become a common pattern, but in this one case using
that odd union is probably the best way to document to the compiler what
is conceptually going on here.
[ Side note: there are valid cases where we convert pointers to other
pointer types, notably the whole "folio vs page" situation, where the
types actually have fundamental commonalities.
The fact that the gcc note is limited to just randomized structures
means that we don't see equivalent warnings for those cases, but it
migth also mean that we miss other cases where we do play these kinds
of dodgy games, and this kind of explicit conversion might be a good
idea. ]
I verified that at least for an allmodconfig build on x86-64, this
generates the exact same code, apart from line numbers and assembler
comment changes.
Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The usermodehelper code uses two fake pointers for the two capability
cases: CAP_BSET for reading and writing 'usermodehelper_bset', and
CAP_PI to read and write 'usermodehelper_inheritable'.
This seems to be a completely unnecessary indirection, since we could
instead just use the pointers themselves, and never have to do any "if
this then that" kind of logic.
So just get rid of the fake pointer values, and use the real pointer
values instead.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is passing IS_ERR() instead of PTR_ERR() so instead of an error
code it prints and returns the number 1.
Fixes: 4a55ed6f89f5 ("i2c: Add GXP SoC I2C Controller")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
According to Documentation/i2c/fault-codes.rst, NACK after sending an
address should be -ENXIO.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
There used to be error messages which had to go. Now, it only consists
of 'break's, so it can go.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The ppc64le_allmodconfig sets I2C_PASEMI=y and leaves COMPILE_TEST to
default to y and I2C_APPLE to default to m, running into a known
incompatible configuration that breaks the build [1]. Specifically,
a common dependency (i2c-pasemi-core.o in this case) cannot be used by
both builtin and module consumers.
Disable I2C_APPLE when I2C_PASEMI is a builtin to prevent this.
[1]: https://lore.kernel.org/all/202112061809.XT99aPrf-lkp@intel.com
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
If the check (id != 0x41) fails, then id == 0x41 and
the other check in 'else' branch also
fails: id & 0x0F = 0b01000001 & 0b00001111 = 0b00000001.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Fomin <fomindmitriyfoma@mail.ru>
Link: https://lore.kernel.org/r/20230225184322.6286-2-fomindmitriyfoma@mail.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If snd_ctl_add() fails in aureon_add_controls(), it immediately returns
and leaves ice->gpio_mutex locked. ice->gpio_mutex locks in
snd_ice1712_save_gpio_status and unlocks in
snd_ice1712_restore_gpio_status(ice).
It seems that the mutex is required only for aureon_cs8415_get(),
so snd_ice1712_restore_gpio_status(ice) can be placed
just after that. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Fomin <fomindmitriyfoma@mail.ru>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230225184322.6286-1-fomindmitriyfoma@mail.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HP EliteDesk 800 G6 Tower PC (103c:870c) requires a quirk for enabling
headset-mic.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217008
Link: https://lore.kernel.org/r/20230223074749.1026060-1-l.stelmach@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The headset jack works better with model=alc283-dac-wcaps. Without this
option, the headset insertion (separate physical jack) may not be handled
correctly (re-insertion is required).
It seems that it follows the "Intel Reference Board" defaults.
Reported-by: steven_wu2@dell.com
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230221102157.515852-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 104ff59af73a ("ata: ahci: Add Tiger Lake UP{3,4} AHCI
controller") enabled low power mode for the Tiger Lake AHIC adapter in
the author system but created regressions for others. Revert this patch
for now until a better solution is found to make this adapter
eco-friendly.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217114
CC: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Dikshita's old email is still picked up by the likes of get_maintainer.pl
and keeps bouncing. Map it to his current one.
Link: https://lkml.kernel.org/r/20230228153335.907164-2-konrad.dybcio@linaro.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Dikshita Agarwal <dikshita@qti.qualcomm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Vikash's old email is still picked up by the likes of get_maintainer.pl
and keeps bouncing. Map it to his current one.
Link: https://lkml.kernel.org/r/20230228153335.907164-3-konrad.dybcio@linaro.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
file_ra_state_init() assumes that the file_ra_state has been zeroed out.
Fixes a KMSAN used-unintialized issue (at least).
Fixes: cf948cbc35e80 ("cramfs: read_mapping_page() is synchronous")
Reported-by: syzbot <syzbot+8ce7f8308d91e6b8bbe2@syzkaller.appspotmail.com>
Link: https://lkml.kernel.org/r/0000000000008f74e905f56df987@google.com
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current hfsplus_put_super first calls hfs_btree_close on
sbi->ext_tree, then invokes iput on sbi->hidden_dir, resulting in an
use-after-free issue in hfsplus_release_folio.
As shown in hfsplus_fill_super, the error handling code also calls iput
before hfs_btree_close.
To fix this error, we move all iput calls before hfsplus_btree_close.
Note that this patch is tested on Syzbot.
Link: https://lkml.kernel.org/r/20230226124948.3175736-1-mudongliangabcd@gmail.com
Reported-by: syzbot+57e3e98f7e3b80f64d56@syzkaller.appspotmail.com
Tested-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 8d470a45d1a6 ("panic: add option to dump all CPUs backtraces in
panic_print") introduced a setting for the "panic_print" kernel parameter
to allow users to request a NMI backtrace on panic. Problem is that the
panic_print handling happens after the secondary CPUs are already
disabled, hence this option ended-up being kind of a no-op - kernel skips
the NMI trace in idling CPUs, which is the case of offline CPUs.
Fix it by checking the NMI backtrace bit in the panic_print prior to the
CPU disabling function.
Link: https://lkml.kernel.org/r/20230226160838.414257-1-gpiccoli@igalia.com
Fixes: 8d470a45d1a6 ("panic: add option to dump all CPUs backtraces in panic_print")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: <stable@vger.kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit 67222c4ba8af ("lib: parser: optimize match_NUMBER apis to use local
array") removed -ENOMEM as a possible return value, so update the comments
accordingly.
Link: https://lkml.kernel.org/r/20230224042618.9092-1-ebiggers@kernel.org
Fixes: 67222c4ba8af ("lib: parser: optimize match_NUMBER apis to use local array")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Li Lingfeng <lilingfeng3@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that memcpy/memset/memmove are no longer overridden by KASAN, we can
just use the normal symbol names in uninstrumented files.
Drop the preprocessor redefinitions.
Link: https://lkml.kernel.org/r/20230224085942.1791837-4-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The tests for memset/memmove have been failing since they haven't been
instrumented in 69d4c0d32186.
Fix the test to recognize when memintrinsics aren't instrumented, and skip
test cases accordingly. We also need to conditionally pass -fno-builtin
to the test, otherwise the instrumentation pass won't recognize
memintrinsics and end up not instrumenting them either.
Link: https://lkml.kernel.org/r/20230224085942.1791837-3-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Where the compiler instruments meminstrinsics by generating calls to
__asan/__hwasan_ prefixed functions, let the compiler consider
memintrinsics as builtin again.
To do so, never override memset/memmove/memcpy if the compiler does the
correct instrumentation - even on !GENERIC_ENTRY architectures.
[elver@google.com: powerpc: don't rename memintrinsics if compiler adds prefixes]
Link: https://lore.kernel.org/all/20230224085942.1791837-1-elver@google.com/ [1]
Link: https://lkml.kernel.org/r/20230227094726.3833247-1-elver@google.com
Link: https://lkml.kernel.org/r/20230224085942.1791837-2-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Clang 15 provides an option to prefix memcpy/memset/memmove calls with
__asan_/__hwasan_ in instrumented functions:
https://reviews.llvm.org/D122724
GCC will add support in future:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108777
Use it to regain KASAN instrumentation of memcpy/memset/memmove on
architectures that require noinstr to be really free from instrumented
mem*() functions (all GENERIC_ENTRY architectures).
Link: https://lkml.kernel.org/r/20230224085942.1791837-1-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: kasan-dev@googlegroups.com
Cc: Kees Cook <keescook@chromium.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org> # build only
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The block layer might merge together discard requests up until the
max_discard_segments limit is hit, but blk_insert_cloned_request checks
the segment count against max_segments regardless of the req op. This
can result in errors like the following when discards are issued through
a DM device and max_discard_segments exceeds max_segments for the queue
of the chosen underlying device.
blk_insert_cloned_request: over max segments limit. (256 > 129)
Fix this by looking at the req_op and enforcing the appropriate segment
limit - max_discard_segments for REQ_OP_DISCARDs and max_segments for
everything else.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230301000655.48112-1-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To address this build error:
BINDGEN rust/bindings/bindings_generated.rs
BINDGEN rust/bindings/bindings_helpers_generated.rs
EXPORTS rust/exports_core_generated.h
RUSTC P rust/libmacros.so
RUSTC L rust/compiler_builtins.o
RUSTC L rust/alloc.o
RUSTC L rust/bindings.o
RUSTC L rust/build_error.o
EXPORTS rust/exports_alloc_generated.h
error[E0588]: packed type cannot transitively contain a `#[repr(align)]` type
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10094:1
|
10094 | / pub struct alt_instr {
10095 | | pub instr_offset: s32,
10096 | | pub repl_offset: s32,
10097 | | pub __bindgen_anon_1: alt_instr__bindgen_ty_1,
10098 | | pub instrlen: u8_,
10099 | | pub replacementlen: u8_,
10100 | | }
| |_^
|
note: `alt_instr__bindgen_ty_1__bindgen_ty_1` has a `#[repr(align)]` attribute
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10111:1
|
10111 | / pub struct alt_instr__bindgen_ty_1__bindgen_ty_1 {
10112 | | pub _bitfield_1: __BindgenBitfieldUnit<[u8; 4usize], u16>,
10113 | | }
| |_^
note: `alt_instr` contains a field of type `alt_instr__bindgen_ty_1`
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10097:9
|
10097 | pub __bindgen_anon_1: alt_instr__bindgen_ty_1,
| ^^^^^^^^^^^^^^^^
note: ...which contains a field of type `alt_instr__bindgen_ty_1__bindgen_ty_1`
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10104:9
|
10104 | pub __bindgen_anon_1: alt_instr__bindgen_ty_1__bindgen_ty_1,
| ^^^^^^^^^^^^^^^^
error: aborting due to previous error
For more information about this error, try `rustc --explain E0588`.
make[1]: *** [rust/Makefile:389: rust/bindings.o] Error 1
make: *** [Makefile:1293: prepare] Error 2
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 5d1dd961e743 ("x86/alternatives: Add alt_instr.flags")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
openrisc equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
Robert Nelson
Siddharth Vadapalli
Bhavya Kapoor
Julien Panis
Nishanth Menon
Jayesh Choudhary
Andrew Davis
Vignesh Raghavendra
Devarsh Thakkar
Nitin Yadav
Linus Torvalds
Masahiro Yamada
Al Viro
Dan Carpenter
Wolfram Sang
Benjamin Gray
Dmitry Fomin
Łukasz Stelmach
Jaroslav Kysela
Damien Le Moal
Konrad Dybcio
Andrew Morton
Dongliang Mu
Guilherme G. Piccoli
Eric Biggers
Marco Elver
Uday Shankar
Arnaldo Carvalho de Melo