| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit d3c61619568c ("ARM: 8788/1: ftrace: remove old mcount support")
removed the old mcount support, but forget to remove these three
declarations. This patch removes them.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Since $(NM) variable can be easily overridden for the whole build, it's
better to use it instead of $(CROSS_COMPILE)nm. The use of $(CROSS_COMPILE)
prefixed variables where their calculated equivalents can be used is
incorrect. This fixes issues with builds where $(NM) is set to llvm-nm.
Link: https://github.com/ClangBuiltLinux/linux/issues/766
Signed-off-by: Dmitry Golovin <dima@golovin.in>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Matthias Maennich <maennich@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
On platforms implementing CPU power management, the CPUidle subsystem
can allow CPUs to enter idle states where local timers logic is lost on power
down. To keep the software timers functional the kernel relies on an
always-on broadcast timer to be present in the platform to relay the
interrupt signalling the timer expiries.
For platforms implementing CPU core gating that do not implement an always-on
HW timer or implement it in a broken way, this patch adds code to initialize
the kernel hrtimer based clock event device upon boot (which can be chosen as
tick broadcast device by the kernel).
It relies on a dynamically chosen CPU to be always powered-up. This CPU then
relays the timer interrupt to CPUs in deep-idle states through its HW local
timer device.
Having a CPU always-on has implications on power management platform
capabilities and makes CPUidle suboptimal, since at least a CPU is kept
always in a shallow idle state by the kernel to relay timer interrupts,
but at least leaves the kernel with a functional system with some working
power management capabilities.
The hrtimer based clock event device is unconditionally registered, but
has the lowest possible rating such that any broadcast-capable HW clock
event device present will be chosen in preference as the tick broadcast
device.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
When the default processor handling was added to the function
cpu_v7_spectre_init() it only excluded other ARM implemented processor
cores. The Broadcom Brahma B53 core is not implemented by ARM so it
ended up falling through into the set of processors that attempt to use
the ARM_SMCCC_ARCH_WORKAROUND_1 service to harden the branch predictor.
Since this workaround is not necessary for the Brahma-B53 this commit
explicitly checks for it and prevents it from applying a branch
predictor hardening workaround.
Fixes: 10115105cb3a ("ARM: spectre-v2: add firmware based hardening")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
It looks like a section directive was using "Solaris style" to declare
the section flags. Replace this with the GNU style so that Clang's
integrated assembler can assemble this directive.
The modified instances were identified via:
$ ag \.section | grep #
Link: https://ftp.gnu.org/old-gnu/Manuals/gas-2.9.1/html_chapter/as_7.html#SEC119
Link: https://github.com/ClangBuiltLinux/linux/issues/744
Link: https://bugs.llvm.org/show_bug.cgi?id=43759
Link: https://reviews.llvm.org/D69296
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Fangrui Song <maskray@google.com>
Suggested-by: Jian Cai <jiancai@google.com>
Suggested-by: Peter Smith <peter.smith@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
With the release of Linux 5.1 has been added a new syscall,
clock_gettime64, that provided a 64 bit time value for a specified
clock_ID to make the kernel Y2038 safe on 32 bit architectures.
Update the arm specific vDSO library accordingly with what it has
been done for the kernel syscall exposing the clock_gettime64 entry
point.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The generic vDSO library provides an implementation of clock_getres() that
can be leveraged by each architecture.
Add clock_getres() entry point on arm to be on pair with arm64.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The arm vDSO library requires some adaptations to take advantage of
the newly introduced generic vDSO library.
Introduce the following changes:
- Modification vdso.c to be compliant with the common vdso datapage
- Use of lib/vdso for gettimeofday
- Implementation of elf note
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
LLVM's integrated assembler does not accept r15 as mrc operand.
arch/arm/boot/compressed/head.S:1267:16: error: operand must be a register in range [r0, r14] or apsr_nzcv
1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate D cache
^
Use APSR_nzcv instead of r15. The GNU assembler supports this
syntax since binutils 2.21 [0].
[0] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=db472d6ff0f438a21b357249a9b48e4b74498076
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
When ARMv8 cores are used in AArch32 mode, arch_hw_breakpoint_init()
in arch/arm/kernel/hw_breakpoint.c will be used.
From ARMv8 specification, v8 debug architecture versions defined:
* 0110 ARMv8, v8 Debug architecture.
* 0111 ARMv8.1, v8 Debug architecture, with Virtualization Host
Extensions.
* 1000 ARMv8.2, v8.2 Debug architecture.
* 1001 ARMv8.4, v8.4 Debug architecture.
So missing ARMv8.1/ARMv8.2/ARMv8.4 cases will cause
enable_monitor_mode() returns -ENODEV,and eventually
arch_hw_breakpoint_init() will fail.
Signed-off-by: Candle Sun <candle.sun@unisoc.com>
Signed-off-by: Nianfu Bai <nianfu.bai@unisoc.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The system currently warns if the config conditions for
building return_address in arch/arm/kernel/return_address.c
are not met, leaving just an EXPORT_SYMBOL_GPL(return_address)
of a function defined to be 'static linline'.
This is a result of aeea3592a13b ("ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h").
Since we're not going to build anything other than an exported
symbol for something that is already being defined to be an
inline-able return of NULL, just avoid building the code to
remove the following warning:
Fixes: aeea3592a13b ("ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Caching dates is never a good idea ;-)
Fixes: 7253b85cc62d6ff8 ("ARM: 7541/1: Add ARM ERRATA 775420 workaround")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The arch/arm/kernel/tcm.c should include <asm/tcm.h>
for declarations of tcm_alloc, tcm_free and other
functions. Fixes the following sparse warnings:
arch/arm/kernel/tcm.c:74:6: warning: symbol 'tcm_alloc' was not declared. Should it be static?
arch/arm/kernel/tcm.c:92:6: warning: symbol 'tcm_free' was not declared. Should it be static?
arch/arm/kernel/tcm.c:98:6: warning: symbol 'tcm_dtcm_present' was not declared. Should it be static?
arch/arm/kernel/tcm.c:104:6: warning: symbol 'tcm_itcm_present' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The dtcm_end and itcm_end are not exported or used
elsewhere, so make them static to remove the following
sparse warnign:
arch/arm/kernel/tcm.c:33:5: warning: symbol 'dtcm_end' was not declared. Should it be static?
arch/arm/kernel/tcm.c:34:5: warning: symbol 'itcm_end' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
iomap.c needs <asm/vga.h> for the definition vga_base
to avoid the following warning:
arch/arm/mm/iomap.c:13:15: warning: symbol 'vga_base' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The rate pointer in parse_dt_topology is a pointer to a
__be32, not a u32. This fixes the following sparse warning:
arch/arm/kernel/topology.c:128:43: warning: incorrect type in argument 1 (different base types)
arch/arm/kernel/topology.c:128:43: expected restricted __be32 const [usertype] *p
arch/arm/kernel/topology.c:128:43: got unsigned int const [usertype] *[assigned] rate
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The get_signal_page() function is defined in signal.c and used in
process.c but there is no shared definition. Add one in signal.h to
silence the following warning:
arch/arm/kernel/signal.c:683:13: warning: symbol 'get_signal_page' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The psci_cpu_{disable,die,kill} functions are not
exported, so make them static to avoid the following
warnings:
arch/arm/kernel/psci_smp.c:54:5: warning: symbol 'psci_cpu_disable' was not declared. Should it be static?
arch/arm/kernel/psci_smp.c:67:6: warning: symbol 'psci_cpu_die' was not declared. Should it be static?
arch/arm/kernel/psci_smp.c:79:5: warning: symbol 'psci_cpu_kill' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The definitions of set_kernel_text_rw() and
set_kernel_text_ro() are in <asm/set_memory.h>
but this is not included in init.c which defines
these. Silence the following warnings by including
the <asm/set_memory.h> header.
arch/arm/mm/init.c:669:6: warning: symbol 'set_kernel_text_rw' was not declared. Should it be static?
arch/arm/mm/init.c:678:6: warning: symbol 'set_kernel_text_ro' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The set_section_perms() is not defined outside of the
init.c file, so make it static to avoid the following
warning:
arch/arm/mm/init.c:596:6: warning: symbol 'set_section_perms' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
There are some sparse warnings about type conversion in
the atags_to_fdt.c code, due to __be32 and __be64, so
fix the following:
- Change _be32 and __be64 where appropriate
- Change setprop() to take a 'void *'
- Change incorrect fdt32_to_cpu() on FDT_MAGIC
Fixes the following sparse warnings:
arch/arm/boot/compressed/atags_to_fdt.c:66:29: warning: cast to restricted __be32
arch/arm/boot/compressed/atags_to_fdt.c:66:29: warning: cast to restricted __be32
arch/arm/boot/compressed/atags_to_fdt.c:66:29: warning: cast to restricted __be32
arch/arm/boot/compressed/atags_to_fdt.c:66:29: warning: cast to restricted __be32
arch/arm/boot/compressed/atags_to_fdt.c:66:29: warning: cast to restricted __be32
arch/arm/boot/compressed/atags_to_fdt.c:66:29: warning: cast to restricted __be32
arch/arm/boot/compressed/atags_to_fdt.c:141:34: warning: cast to restricted __be32
arch/arm/boot/compressed/atags_to_fdt.c:141:34: warning: cast to restricted __be32
arch/arm/boot/compressed/atags_to_fdt.c:141:34: warning: cast to restricted __be32
arch/arm/boot/compressed/atags_to_fdt.c:141:34: warning: cast to restricted __be32
arch/arm/boot/compressed/atags_to_fdt.c:141:34: warning: cast to restricted __be32
arch/arm/boot/compressed/atags_to_fdt.c:141:34: warning: cast to restricted __be32
arch/arm/boot/compressed/atags_to_fdt.c:182:60: warning: incorrect type in assignment (different base types)
arch/arm/boot/compressed/atags_to_fdt.c:182:60: expected unsigned long long [usertype]
arch/arm/boot/compressed/atags_to_fdt.c:182:60: got restricted __be64 [usertype]
arch/arm/boot/compressed/atags_to_fdt.c:184:60: warning: incorrect type in assignment (different base types)
arch/arm/boot/compressed/atags_to_fdt.c:184:60: expected unsigned long long [usertype]
arch/arm/boot/compressed/atags_to_fdt.c:184:60: got restricted __be64 [usertype]
arch/arm/boot/compressed/atags_to_fdt.c:187:62: warning: incorrect type in assignment (different base types)
arch/arm/boot/compressed/atags_to_fdt.c:187:62: expected unsigned int
arch/arm/boot/compressed/atags_to_fdt.c:187:62: got restricted __be32 [usertype]
arch/arm/boot/compressed/atags_to_fdt.c:189:62: warning: incorrect type in assignment (different base types)
arch/arm/boot/compressed/atags_to_fdt.c:189:62: expected unsigned int
arch/arm/boot/compressed/atags_to_fdt.c:189:62: got restricted __be32 [usertype]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The arch_timer_arch_init is defined in <asm/arch_timer.h> so include
that to fix the following sparse error:
arch/arm/kernel/arch_timer.c:31:12: warning: symbol 'arch_timer_arch_init' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Move the pcibios_report_status to <asm/pci.h> include to remove the
following sparse warning and to remove the extra definition in the
footbrdige dc21285.c driver:
arch/arm/kernel/bios32.c:59:6: warning: symbol 'pcibios_report_status' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The module_frob_arch_sections function is missing the header declaration
which is in <linux/moduleloader.h> so include that to fix the following
sparse warning:
arch/arm/kernel/module-plts.c:188:5: warning: symbol 'module_frob_arch_sections' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Fixup the following sparse warnings by making the functions and structures
static.
arch/arm/mm/dma-mapping.c:1562:6: warning: symbol '__arm_iommu_free_attrs' was not declared. Should it be static?
arch/arm/mm/dma-mapping.c:1586:6: warning: symbol 'arm_iommu_free_attrs' was not declared. Should it be static?
arch/arm/mm/dma-mapping.c:1592:6: warning: symbol 'arm_coherent_iommu_free_attrs' was not declared. Should it be static?
arch/arm/mm/dma-mapping.c:1716:5: warning: symbol 'arm_coherent_iommu_map_sg' was not declared. Should it be static?
arch/arm/mm/dma-mapping.c:1734:5: warning: symbol 'arm_iommu_map_sg' was not declared. Should it be static?
arch/arm/mm/dma-mapping.c:1767:6: warning: symbol 'arm_coherent_iommu_unmap_sg' was not declared. Should it be static?
arch/arm/mm/dma-mapping.c:1784:6: warning: symbol 'arm_iommu_unmap_sg' was not declared. Should it be static?
arch/arm/mm/dma-mapping.c:1798:6: warning: symbol 'arm_iommu_sync_sg_for_cpu' was not declared. Should it be static?
arch/arm/mm/dma-mapping.c:1816:6: warning: symbol 'arm_iommu_sync_sg_for_device' was not declared. Should it be static?
arch/arm/mm/dma-mapping.c:2018:26: warning: symbol 'iommu_ops' was not declared. Should it be static?
arch/arm/mm/dma-mapping.c:2040:26: warning: symbol 'iommu_coherent_ops' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Avoid calling __pfn_to_phys twice.
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
|
|
If we always compile the get_break_insn_length inline function we can
remove the ifdefs and let dead code elimination take care of the warn
branch that is now unreadable because the report_bug stub always
returns BUG_TRAP_TYPE_BUG.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
nbd requires socket families to support the shutdown method so the nbd
recv workqueue can be woken up from its sock_recvmsg call. If the socket
does not support the callout we will leave recv works running or get hangs
later when the device or module is removed.
This adds a check during socket connection/reconnection to make sure the
socket being passed in supports the needed callout.
Reported-by: syzbot+24c12fa8d218ed26011a@syzkaller.appspotmail.com
Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs")
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This driver is using regulator_get_optional() to handle all the supplies
that it handles, and only ever enables and disables all supplies en masse
without ever doing any other configuration of the device to handle missing
power. These are clear signs that the API is being misused - it should only
be used for supplies that may be physically absent from the system and in
these cases the hardware usually needs different configuration if the
supply is missing. Instead use normal regualtor_get(), if the supply is
not described in DT then the framework will substitute a dummy regulator in
so no special handling is needed by the consumer driver.
In the case of the PHY regulator the handling in the driver is a hack to
deal with integrated PHYs; the supplies are only optional in the sense
that that there's some confusion in the code about where they're bound to.
From a code point of view they function exactly as normal supplies so can
be treated as such. It'd probably be better to model this by instantiating
a PHY object for integrated PHYs.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We hit the following warning in production
print_req_error: I/O error, dev nbd0, sector 7213934408 flags 80700
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 25 PID: 32407 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60
Workqueue: knbd-recv recv_work [nbd]
RIP: 0010:refcount_sub_and_test_checked+0x53/0x60
Call Trace:
blk_mq_free_request+0xb7/0xf0
blk_mq_complete_request+0x62/0xf0
recv_work+0x29/0xa1 [nbd]
process_one_work+0x1f5/0x3f0
worker_thread+0x2d/0x3d0
? rescuer_thread+0x340/0x340
kthread+0x111/0x130
? kthread_create_on_node+0x60/0x60
ret_from_fork+0x1f/0x30
---[ end trace b079c3c67f98bb7c ]---
This was preceded by us timing out everything and shutting down the
sockets for the device. The problem is we had a request in the queue at
the same time, so we completed the request twice. This can actually
happen in a lot of cases, we fail to get a ref on our config, we only
have one connection and just error out the command, etc.
Fix this by checking cmd->status in nbd_read_stat. We only change this
under the cmd->lock, so we are safe to check this here and see if we've
already error'ed this command out, which would indicate that we've
completed it as well.
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We already do this for the most part, except in timeout and clear_req.
For the timeout case we take the lock after we grab a ref on the config,
but that isn't really necessary because we're safe to touch the cmd at
this point, so just move the order around.
For the clear_req cause this is initiated by the user, so again is safe.
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We currently assume that submissions from the sqthread are successful,
and if IO polling is enabled, we use that value for knowing how many
completions to look for. But if we overflowed the CQ ring or some
requests simply got errored and already completed, they won't be
available for polling.
For the case of IO polling and SQTHREAD usage, look at the pending
poll list. If it ever hits empty then we know that we don't have
anymore pollable requests inflight. For that case, simply reset
the inflight count to zero.
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We currently use the ring values directly, but that can lead to issues
if the application is malicious and changes these values on our behalf.
Created in-kernel cached versions of them, and just overwrite the user
side when we update them. This is similar to how we treat the sq/cq
ring tail/head updates.
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Relax qspi pins slew-rate to minimize peak currents.
Fixes: 844030057339 ("ARM: dts: stm32: add flash nor support on stm32mp157c eval board")
Link: https://lore.kernel.org/r/20191025130122.11407-1-alexandre.torgue@st.com
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
io_ring_submit() finalises with
1. io_commit_sqring(), which releases sqes to the userspace
2. Then calls to io_queue_link_head(), accessing released head's sqe
Reorder them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_sq_thread() processes sqes by 8 without considering links. As a
result, links will be randomely subdivided.
The easiest way to fix it is to call io_get_sqring() inside
io_submit_sqes() as do io_ring_submit().
Downsides:
1. This removes optimisation of not grabbing mm_struct for fixed files
2. It submitting all sqes in one go, without finer-grained sheduling
with cq processing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is a bug, where failed linked requests are returned not with
specified @user_data, but with garbage from a kernel stack.
The reason is that io_fail_links() uses req->user_data, which is
uninitialised when called from io_queue_sqe() on fail path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Support for the kernel as Xen 32-bit PV guest will soon be removed.
Issue a warning when booted as such.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Modify plic_init() to skip .dts interrupt contexts other
than supervisor external interrupt.
The .dts entry for plic may specify multiple interrupt contexts.
For example, it may assign two entries IRQ_M_EXT and IRQ_S_EXT,
in that order, to the same interrupt controller. This patch
modifies plic_init() to skip the IRQ_M_EXT context since
IRQ_S_EXT is currently the only supported context.
If IRQ_M_EXT is not skipped, plic_init() will report "handler
already present for context" when it comes across the IRQ_S_EXT
context in the next iteration of its loop.
Without this patch, .dts would have to be edited to replace the
value of IRQ_M_EXT with -1 for it to be skipped.
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # arch/riscv
Link: https://lkml.kernel.org/r/1571933503-21504-1-git-send-email-alan.mikhak@sifive.com
|
|
There's a deadlock that is possible and can easily be seen with
a test where multiple readers open/read/close of the same file
and a disruption occurs causing reconnect. The deadlock is due
a reader thread inside cifs_strict_readv calling down_read and
obtaining lock_sem, and then after reconnect inside
cifs_reopen_file calling down_read a second time. If in
between the two down_read calls, a down_write comes from
another process, deadlock occurs.
CPU0 CPU1
---- ----
cifs_strict_readv()
down_read(&cifsi->lock_sem);
_cifsFileInfo_put
OR
cifs_new_fileinfo
down_write(&cifsi->lock_sem);
cifs_reopen_file()
down_read(&cifsi->lock_sem);
Fix the above by changing all down_write(lock_sem) calls to
down_write_trylock(lock_sem)/msleep() loop, which in turn
makes the second down_read call benign since it will never
block behind the writer while holding lock_sem.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Suggested-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed--by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Currently the code assumes that if a file info entry belongs
to lists of open file handles of an inode and a tcon then
it has non-zero reference. The recent changes broke that
assumption when putting the last reference of the file info.
There may be a situation when a file is being deleted but
nothing prevents another thread to reference it again
and start using it. This happens because we do not hold
the inode list lock while checking the number of references
of the file info structure. Fix this by doing the proper
locking when doing the check.
Fixes: 487317c99477d ("cifs: add spinlock for the openFileList to cifsInodeInfo")
Fixes: cb248819d209d ("cifs: use cifsInodeInfo->open_file_lock while iterating to avoid a panic")
Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When the client hits reconnect it iterates over the mid
pending queue marking entries for retry and moving them
to a temporary list to issue callbacks later without holding
GlobalMid_Lock. In the same time there is no guarantee that
mids can't be removed from the temporary list or even
freed completely by another thread. It may cause a temporary
list corruption:
[ 430.454897] list_del corruption. prev->next should be ffff98d3a8f316c0, but was 2e885cb266355469
[ 430.464668] ------------[ cut here ]------------
[ 430.466569] kernel BUG at lib/list_debug.c:51!
[ 430.468476] invalid opcode: 0000 [#1] SMP PTI
[ 430.470286] CPU: 0 PID: 13267 Comm: cifsd Kdump: loaded Not tainted 5.4.0-rc3+ #19
[ 430.473472] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 430.475872] RIP: 0010:__list_del_entry_valid.cold+0x31/0x55
...
[ 430.510426] Call Trace:
[ 430.511500] cifs_reconnect+0x25e/0x610 [cifs]
[ 430.513350] cifs_readv_from_socket+0x220/0x250 [cifs]
[ 430.515464] cifs_read_from_socket+0x4a/0x70 [cifs]
[ 430.517452] ? try_to_wake_up+0x212/0x650
[ 430.519122] ? cifs_small_buf_get+0x16/0x30 [cifs]
[ 430.521086] ? allocate_buffers+0x66/0x120 [cifs]
[ 430.523019] cifs_demultiplex_thread+0xdc/0xc30 [cifs]
[ 430.525116] kthread+0xfb/0x130
[ 430.526421] ? cifs_handle_standard+0x190/0x190 [cifs]
[ 430.528514] ? kthread_park+0x90/0x90
[ 430.530019] ret_from_fork+0x35/0x40
Fix this by obtaining extra references for mids being retried
and marking them as MID_DELETED which indicates that such a mid
has been dequeued from the pending list.
Also move mid cleanup logic from DeleteMidQEntry to
_cifs_mid_q_entry_release which is called when the last reference
to a particular mid is put. This allows to avoid any use-after-free
of response buffers.
The patch needs to be backported to stable kernels. A stable tag
is not mentioned below because the patch doesn't apply cleanly
to any actively maintained stable kernel.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-and-tested-by: David Wysochanski <dwysocha@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Remove the following warning:
drivers/i2c/busses/i2c-stm32f7.c:315:
warning: cannot understand function prototype:
'struct stm32f7_i2c_spec i2c_specs[] =
Replace a comment starting with /** by simply /* to avoid having
it interpreted as a kernel-doc comment.
Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
When in slave mode, an arbitration loss (ARLO) may be detected before the
slave had a chance to detect the stop condition (STOPF in ISR).
This is seen when two master + slave adapters switch their roles. It
provokes the i2c bus to be stuck, busy as SCL line is stretched.
- the I2C_SLAVE_STOP event is never generated due to STOPF flag is set but
don't generate an irq (race with ARLO irq, STOPIE is masked). STOPF flag
remains set until next master xfer (e.g. when STOPIE irq get unmasked).
In this case, completion is generated too early: immediately upon new
transfer request (then it doesn't send all data).
- Some data get stuck in TXDR register. As a consequence, the controller
stretches the SCL line: the bus gets busy until a future master transfer
triggers the bus busy / recovery mechanism (this can take time... and
may never happen at all)
So choice is to let the STOPF being detected by the slave isr handler,
to properly handle this stop condition. E.g. don't mask IRQs in error
handler, when the slave is running.
Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
The slave-interface documentation [1] states "the bus driver should
transmit the first byte" upon I2C_SLAVE_READ_REQUESTED slave event:
- 'val': backend returns first byte to be sent
The driver currently ignores the 1st byte to send on this event.
[1] https://www.kernel.org/doc/Documentation/i2c/slave-interface
Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Since commit abf4923e97c3 ("i2c: mediatek: disable zero-length transfers
for mt8183"), there is a NULL pointer dereference for all the SoCs
that don't have any quirk. mtk_i2c_functionality is not checking that
the quirks pointer is not NULL before starting to use it.
This commit add a call to i2c_check_quirks which will check whether
the quirks pointer is set, and if so will check if the IP has the
NO_ZERO_LEN quirk.
Fixes: abf4923e97c3 ("i2c: mediatek: disable zero-length transfers for mt8183")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Cengiz Can <cengiz@kernel.wtf>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Ulrich Hecht <uli@fpond.eu>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
On a system without Single VMOVP support (say GITS_TYPER.VMOVP == 0),
we will map vPEs only on ITSs that will actually control interrupts
for the given VM. And when moving a vPE, the VMOVP command will be
issued only for those ITSs.
But when issuing VMOVPs we seemed fail to present the exact ITSList
to ITSs who are actually included in the synchronization operation.
The its_list_map we're currently using includes all ITSs in the system,
even though some of them don't have the corresponding vPE mapping at all.
Introduce get_its_list() to get the per-VM its_list_map, to indicate
which ITSs have vPE mappings for the given VM, and use this map as
the expected ITSList when building VMOVP. This is hopefully a performance
gain not to do some synchronization with those unsuspecting ITSs.
And initialize the whole command descriptor to zero at beginning, since
the seq_num and its_list should be RES0 when GITS_TYPER.VMOVP == 1.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1571802386-2680-1-git-send-email-yuzenghui@huawei.com
|
|
gfs2 and gfs2meta share an ->init_fs_context function which allocates an
args structure stored in fc->fs_private. gfs2 registers a ->free
function to free this memory when the fs_context is cleaned up, but
there was not one registered for gfs2meta, causing a leak.
Register a ->free function for gfs2meta. The existing gfs2_fc_free
function does what we need.
Reported-by: syzbot+c2fdfd2b783754878fb6@syzkaller.appspotmail.com
Fixes: 1f52aa08d12f ("gfs2: Convert gfs2 to fs_context")
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Part 3 from this series [1] was not merged due to wrong splitting
and breaks mt6323 pmic on bananapi-r2
dmesg prints this line and at least switch is not initialized on bananapi-r2
mt6397 1000d000.pwrap:mt6323: unsupported chip: 0x0
this patch contains only the probe-changes and chip_data structs
from original part 3 by Hsin-Hsiung Wang
[1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=164155
Fixes: a4872e80ce7d ("mfd: mt6397: Extract IRQ related code from core driver")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
Jisheng Zhang (syna)
Dmitry Golovin
Benjamin Gaignard
Doug Berger
Nick Desaulniers
Vincenzo Frascino
Stefan Agner
Candle Sun
Ben Dooks
Geert Uytterhoeven
Ben Dooks (Codethink)
Clemens Gruber
Linus Torvalds
Christoph Hellwig
Mike Christie
Mark Brown
Josef Bacik
Jens Axboe
Patrice Chotard
Pavel Begunkov
Juergen Gross
Alan Mikhak
Dave Wysochanski
Pavel Shilovsky
Alain Volmat
Fabrice Gasnier
Fabien Parent
Zenghui Yu
Andrew Price
Frank Wunderlich