aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-sqlite.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-09-03ARM: dts: imx6ull: keep IMX6UL_ prefix for signals on both i.MX6UL and i.MX6ULLSébastien Szymanski1-5/+13
Signals available on both i.MX6UL and i.MX6ULL should have the same name because it is the case of all others common signals, it avoids to make mistakes (use the wrong ones) and it makes writing device tree files less complicated. For example: imx6ul-imx6ull-board.dtsi: ... pinctrl_uart5: uart5grp { fsl,pins = < MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 >; }; imx6ul-board.dts: #include <imx6ul.dtsi> #include <imx6ul-imx6ull-board.dtsi> ... imx6ull-board.dts: #include <imx6ull.dtsi> #include <imx6ul-imx6ull-board.dtsi> ... Without this patch, the imx6ull-board.dtb will use MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX instead of MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX and the uart5 will be misconfigured. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx6qdl-wandboard: Add stdout-pathTuomas Tynkkynen1-0/+4
Setting a stdout-path in the .dtb is convenient because then the user gets a serial console on the RS-232 connector without any extra effort of figuring out the relevant 'console=' boot parameter. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx7s-warp: enable i2c3 device supportPierre-Jean Texier1-0/+14
The WaRP7 has one mikroBUS socket on the back to plug click boards. This patch allows to interact with some of these i2c modules (EEPROM, RTC and so on). Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6Jacopo Mondi1-2/+2
The "EDIMM STARTER KIT i.Core 1.5 MIPI Evaluation" is based on the 1.5 version of the i.Core MX6 cpu module. The 1.5 version differs from the original one for a few details, including the ethernet PHY interface clock provider. With this commit, the ethernet interface works properly: SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver While before using the 1.5 version, ethernet failed to startup do to un-clocked PHY interface: fec 2188000.ethernet eth0: could not attach to PHY Fixes: 3fe088357731 ("ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support") Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>