| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add missing terminator to list of unit tests to avoid random crashes seen
when running the test.
Fixes: 10ca05a76065 ("ipe: kunit test for parser")
Cc: Deven Bowers <deven.desai@linux.microsoft.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Avoid "gcc" since it is not the only compiler supported by Kbuild.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
|
|
Building external modules is typically done using this command:
$ make -C <KERNEL_DIR> M=<EXTMOD_DIR>
Here, <KERNEL_DIR> refers to the output directory where the kernel was
built, not the kernel source directory.
When the kernel is built in the source tree, there is no ambiguity, as
the output directory and the source directory are the same.
If the kernel was built in a separate build directory, <KERNEL_DIR>
should be the kernel output directory. Otherwise, Kbuild cannot locate
necessary build artifacts. This has been the method for building
external modules against a pre-built kernel in a separate directory
for over 20 years. [1]
If you pass the kernel source directory to the -C option, you must also
specify the kernel build directory using the O= option. This approach
works as well, though it results in a slightly longer command:
$ make -C <KERNEL_SOURCE_DIR> O=<KERNEL_BUILD_DIR> M=<EXTMOD_DIR>
Some people mistakenly believe that O= should specify a build directory
for external modules when used together with M=. This commit adds more
clarification to Documentation/kbuild/kbuild.rst.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=e321b2ec2eb2993b3d0116e5163c78ad923e3c54
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
|
|
The use of shipped files is discouraged in the upstream kernel these
days. [1]
Downstream Makefiles have the freedom to use shipped files or other
options to handle binaries, but this should not be advertised in the
upstream document.
[1]: https://lore.kernel.org/all/CAHk-=wgSEi_ZrHdqr=20xv+d6dr5G895CbOAi8ok+7-CQUN=fQ@mail.gmail.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
|
|
Do similar to commit 1a4c1c9df72e ("docs/kbuild/makefiles: drop section
numbering, use references").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Do similar to commit 5e8f0ba38a4d ("docs/kbuild/makefiles: throw out the
local table of contents").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Kbuild used to manipulate header search paths, enforcing the odd
limitation of "no space after -I".
Commit cdd750bfb1f7 ("kbuild: remove 'addtree' and 'flags' magic for
header search paths") stopped doing that. This limitation no longer
exists. Instead, you need to accurately specify the header search path.
(In this case, $(src)/include)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
|
|
This description was added 20 years ago [1]. It does not convey any
useful information except for a feeling of nostalgia.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=65e433436b5794ae056d22ddba60fe9194bba007
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
|
|
The phrase "In newer versions of the kernel" was added 14 years ago, by
commit efdf02cf0651 ("Documentation/kbuild: major edit of modules.txt
sections 1-4"). This feature is no longer new, so remove it and update
the paragraph.
Example 3 was written 20 years ago [1]. There is no need to note about
backward compatibility with such an old build system. Remove Example 3
entirely.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=65e433436b5794ae056d22ddba60fe9194bba007
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
|
|
If RUST_LIB_SRC is defined in the top-level Makefile (via an environment
variable or command line), it is already exported.
The only situation where it is defined but not exported is when the
top-level Makefile is wrapped by another Makefile (e.g., GNUmakefile).
I cannot think of any other use cases.
I know some people use this tip to define custom variables. However,
even in that case, you can export it directly in the wrapper Makefile.
Example GNUmakefile:
export RUST_LIB_SRC = /path/to/your/sysroot/lib/rustlib/src/rust/library
include Makefile
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
|
|
As discussed during the distro-centric session within the sched_ext
Microconference at LPC 2024, introduce a sequence counter that is
incremented every time a BPF scheduler is loaded.
This feature can help distributions in diagnosing potential performance
regressions by identifying systems where users are running (or have ran)
custom BPF schedulers.
Example:
arighi@virtme-ng~> cat /sys/kernel/sched_ext/enable_seq
0
arighi@virtme-ng~> sudo scx_simple
local=1 global=0
^CEXIT: unregistered from user space
arighi@virtme-ng~> cat /sys/kernel/sched_ext/enable_seq
1
In this way user-space tools (such as Ubuntu's apport and similar) are
able to gather and include this information in bug reports.
Cc: Giovanni Gherdovich <giovanni.gherdovich@suse.com>
Cc: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Cc: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Cc: Phil Auld <pauld@redhat.com>
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
a2f4b16e736d ("sched_ext: Build fix on !CONFIG_STACKTRACE[_SUPPORT]") tried
fixing build when !CONFIG_STACKTRACE but didn't so fully. Also put
stack_trace_print() and stack_trace_save() inside CONFIG_STACKTRACE to fix
build when !CONFIG_STACKTRACE.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409220642.fDW2OmWc-lkp@intel.com/
|
|
The merge resolution to deal with the conflict between commits
ea72ce5da228 ("x86/kaslr: Expose and use the end of the physical memory
address space") and 99185c10d5d9 ("resource, kunit: add test case for
region_intersects()") ended up being broken in configurations didn't
define a MAX_PHYSMEM_BITS and that had a 32-bit 'phys_addr_t'.
The fallback to using all bits set (ie "(-1ULL)") ended up causing a
build error:
kernel/resource.c: In function ‘gfr_start’:
include/linux/minmax.h:93:30: error: conversion from ‘long long unsigned int’ to ‘resource_size_t’ {aka ‘unsigned int’} changes value from ‘18446744073709551615’ to ‘4294967295’ [-Werror=overflow]
this was reported by Geert for m68k, but he points out that it happens
on other 32-bit architectures too, eg mips, xtensa, parisc, and powerpc.
Limiting 'PHYSMEM_END' to a 'phys_addr_t' (which is the same as
'resource_size_t') fixes the build, but Geert points out that it will
then cause a silent overflow in mm/sparse.c:
unsigned long max_sparsemem_pfn = (PHYSMEM_END + 1) >> PAGE_SHIFT;
so we actually do want PHYSMEM_END to be defined a 64-bit type - just
not all ones, and not larger than 'phys_addr_t'.
The proper fix is probably to not have some kind of default fallback at
all, but just make sure every architecture has a valid MAX_PHYSMEM_BITS.
But in the meantime, this just applies the rule that PHYSMEM_END is the
largest value that fits in a 'phys_addr_t', but does not have the high
bit set in 64 bits.
Ugly, ugly.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch allows f2fs to submit bios of in-place writes on pinned file.
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Disable the rq empty path when scx is enabled. SCX must consult the BPF
scheduler (via the dispatch path in balance) to determine if rq is empty.
This fixes stalls when scx is enabled.
Signed-off-by: Pat Somaru <patso@likewhatevs.io>
Fixes: 3dcac251b066 ("sched/core: Introduce SM_IDLE and an idle re-entry fast-path in __schedule()")
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
When build with CONFIG_GROUP_SCHED_WEIGHT && !CONFIG_FAIR_GROUP_SCHED,
the idle member is not defined:
kernel/sched/ext.c:3701:16: error: 'struct task_group' has no member named 'idle'
3701 | if (!tg->idle)
| ^~
Fix this by putting 'idle' under new CONFIG_GROUP_SCHED_WEIGHT.
tj: Move idle field upward to avoid breaking up CONFIG_FAIR_GROUP_SCHED block.
Fixes: e179e80c5d4f ("sched: Introduce CONFIG_GROUP_SCHED_WEIGHT")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409220859.UiCAoFOW-lkp@intel.com/
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240902085019.4111445-1-nichen@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Document the compatible for sa8775p SoC.
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240830133908.2246139-1-quic_mojha@quicinc.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add Intel Panther Lake-H/P PCI IDs.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240829095719.1557-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add Intel Arrow Lake-H PCI IDs.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240829095719.1557-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Document rk3576 compatible for QoS registers.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/01020191998a2fd4-4d7b091c-9c4c-4067-b8d9-fe7482074d6d-000000@eu-west-1.amazonses.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Allow parsing GPIO controller children nodes with GPIO hogs.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240828030405.2851611-1-haibo.chen@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There's no need to list "tc3589x" in the DT match table. The I2C core
will strip any vendor prefix and match against the i2c_device_id table
which has an "tc3589x" entry.
Probably "tc3589x" and TC3589X_UNKNOWN could be removed altogether.
Use of that compatible was only on some STE platforms and was dropped
in 2013. There were ABI breaks in 2014 claiming no DTs in the wild. See
commit 1637d480f873 ("pinctrl: nomadik: force-convert to generic config
bindings").
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240826191300.1410222-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240826092734.2899562-3-ruanjinjie@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240826092734.2899562-2-ruanjinjie@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240825132617.8809-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The module description can be backtracked to commit e7c256fbfb15
("platform/chrome: Add Chrome OS EC userspace device interface").
The description became out-of-date after a bunch of changes e.g:
- commit 5668bfdd90cd ("platform/chrome: cros_ec_dev - Register cros-ec sensors").
- commit ea01a31b9058 ("cros_ec: Split cros_ec_devs module").
- commit 5e0115581bbc ("cros_ec: Move cros_ec_dev module to drivers/mfd").
Update the description.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20240822121539.4265-1-tzungbi@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Simplify cros_ec_dev_init() by the following changes:
- Get rid of label `failed_devreg`.
- Remove a redundant space and comment.
- Use `if (ret)` instead of `if (ret < 0)`.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20240819102326.5235-1-tzungbi@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240814025710.3875859-1-liaochen4@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The ArmSoM Sige 5 board connects the rk806 PMIC on an i2c bus.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20240802134736.283851-1-detlev.casanova@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Fix the following error when build with CONFIG_GROUP_SCHED_WEIGHT &&
!CONFIG_FAIR_GROUP_SCHED:
kernel/sched/core.c:9634:15: error: implicit declaration of function
'sched_group_set_idle'; did you mean 'scx_group_set_idle'? [-Wimplicit-function-declaration]
9634 | ret = sched_group_set_idle(css_tg(css), idle);
| ^~~~~~~~~~~~~~~~~~~~
| scx_group_set_idle
Fixes: e179e80c5d4f ("sched: Introduce CONFIG_GROUP_SCHED_WEIGHT")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409220859.UiCAoFOW-lkp@intel.com/
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Hexagon images fail to build with the following error.
arch/hexagon/kernel/vdso.c:57:3: error: use of undeclared identifier 'name'
name = "[vdso]",
^
Add the missing '.' to fix the problem.
Fixes: 497258dfafcc ("mm: remove legacy install_special_mapping() code")
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add SPDX identifier to the gitignore. Remove the comment and .i file
since the file it references was removed in another patch. This patch
depends on Min-Hua Chen's 'pm: cpupower: rename raw_pylibcpupower.i'.
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
I have been contributing to exfat for sometime and I would like to help
with code reviews as well.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
If exfat_load_upcase_table reaches end and returns -EINVAL,
allocated memory doesn't get freed and while
exfat_load_default_upcase_table allocates more memory, leading to a
memory leak.
Here's link to syzkaller crash report illustrating this issue:
https://syzkaller.appspot.com/text?tag=CrashReport&x=1406c201980000
Reported-by: syzbot+e1c69cadec0f1a078e3d@syzkaller.appspotmail.com
Fixes: a13d1a4de3b0 ("exfat: move freeing sbi, upcase table and dropping nls into rcu-delayed helper")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
It is not a good way to extend valid_size to the end of the
mmap area by writing zeros in mmap. Because after calling mmap,
no data may be written, or only a small amount of data may be
written to the head of the mmap area.
This commit moves extending valid_size to exfat_page_mkwrite().
In exfat_page_mkwrite() only extend valid_size to the starting
position of new data writing, which reduces unnecessary writing
of zeros.
If the block is not mapped and is marked as new after being
mapped for writing, block_write_begin() will zero the page
cache corresponding to the block, so there is no need to call
zero_user_segment() in exfat_file_zeroed_range(). And after moving
extending valid_size to exfat_page_mkwrite(), the data written by
mmap will be copied to the page cache but the page cache may be
not mapped to the disk. Calling zero_user_segment() will cause
the data written by mmap to be cleared. So this commit removes
calling zero_user_segment() from exfat_file_zeroed_range() and
renames exfat_file_zeroed_range() to exfat_extend_valid_size().
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
The correct macro name for creating a u32 array property entry is
PROPERTY_ENTRY_U32_ARRAY().
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 1b05a7013751 ("ARM: spitz: Use software nodes/properties for the matrix keypad")
Closes: https://lore.kernel.org/oe-kbuild-all/202409230614.BBJikfMj-lkp@intel.com/
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
While using the IOMMU DMA path, the dma_addressing_limited() function
checks ops struct which doesn't exist in the IOMMU case. This causes
to the kernel panic while loading ADMGPU driver.
BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 10 UID: 0 PID: 611 Comm: (udev-worker) Tainted: G T 6.11.0-clang-07154-g726e2d0cf2bb #257
Tainted: [T]=RANDSTRUCT
Hardware name: ASUS System Product Name/ROG STRIX Z690-G GAMING WIFI, BIOS 3701 07/03/2024
RIP: 0010:dma_addressing_limited+0x53/0xa0
Code: 8b 93 48 02 00 00 48 39 d1 49 89 d6 4c 0f 42 f1 48 85 d2 4c 0f 44 f1 f6 83 fc 02 00 00 40 75 0a 48 89 df e8 1f 09 00 00 eb 24 <4c> 8b 1c 25 a0 00 00 00 4d 85 db 74 17 48 89 df 41 ba 8b 84 2d 55
RSP: 0018:ffffa8d2c12cf740 EFLAGS: 00010202
RAX: 00000000ffffffff RBX: ffff8948820220c8 RCX: 000000ffffffffff
RDX: 0000000000000000 RSI: ffffffffc124dc6d RDI: ffff8948820220c8
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff894883c3f040
R13: ffff89488dac8828 R14: 000000ffffffffff R15: ffff8948820220c8
FS: 00007fe6ba881900(0000) GS:ffff894fdf700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 0000000111984000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x65/0xc0
? page_fault_oops+0x3b9/0x450
? _prb_read_valid+0x212/0x390
? do_user_addr_fault+0x608/0x680
? exc_page_fault+0x4e/0xa0
? asm_exc_page_fault+0x26/0x30
? dma_addressing_limited+0x53/0xa0
amdgpu_ttm_init+0x56/0x4b0 [amdgpu]
gmc_v8_0_sw_init+0x561/0x670 [amdgpu]
amdgpu_device_ip_init+0xf5/0x570 [amdgpu]
amdgpu_device_init+0x1a57/0x1ea0 [amdgpu]
? _raw_spin_unlock_irqrestore+0x1a/0x40
? pci_conf1_read+0xc0/0xe0
? pci_bus_read_config_word+0x52/0xa0
amdgpu_driver_load_kms+0x15/0xa0 [amdgpu]
amdgpu_pci_probe+0x1b7/0x4c0 [amdgpu]
pci_device_probe+0x1c5/0x260
really_probe+0x130/0x470
__driver_probe_device+0x77/0x150
driver_probe_device+0x19/0x120
__driver_attach+0xb1/0x1e0
? __cfi___driver_attach+0x10/0x10
bus_for_each_dev+0x115/0x170
bus_add_driver+0x192/0x2d0
driver_register+0x5c/0xf0
? __cfi_init_module+0x10/0x10 [amdgpu]
do_one_initcall+0x128/0x380
? idr_alloc_cyclic+0x139/0x1d0
? security_kernfs_init_security+0x42/0x140
? __kernfs_new_node+0x1be/0x250
? sysvec_apic_timer_interrupt+0xb6/0xc0
? asm_sysvec_apic_timer_interrupt+0x1a/0x20
? _raw_spin_unlock+0x11/0x30
? free_unref_page+0x283/0x650
? kfree+0x274/0x3a0
? kfree+0x274/0x3a0
? kfree+0x274/0x3a0
? load_module+0xf2e/0x1130
? __kmalloc_cache_noprof+0x12a/0x2e0
do_init_module+0x7d/0x240
__se_sys_init_module+0x19e/0x220
do_syscall_64+0x8a/0x150
? __irq_exit_rcu+0x5e/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fe6bb5980ee
Code: 48 8b 0d 3d ed 12 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0a ed 12 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd462219d8 EFLAGS: 00000206 ORIG_RAX: 00000000000000af
RAX: ffffffffffffffda RBX: 0000556caf0d0670 RCX: 00007fe6bb5980ee
RDX: 0000556caf0d3080 RSI: 0000000002893458 RDI: 00007fe6b3400010
RBP: 0000000000020000 R08: 0000000000020010 R09: 0000000000000080
R10: c26073c166186e00 R11: 0000000000000206 R12: 0000556caf0d3430
R13: 0000556caf0d0670 R14: 0000556caf0d3080 R15: 0000556caf0ce700
</TASK>
Modules linked in: amdgpu(+) i915(+) drm_suballoc_helper intel_gtt drm_exec drm_buddy iTCO_wdt i2c_algo_bit intel_pmc_bxt drm_display_helper iTCO_vendor_support gpu_sched drm_ttm_helper cec ttm amdxcp video backlight pinctrl_alderlake nct6775 hwmon_vid nct6775_core coretemp
CR2: 00000000000000a0
---[ end trace 0000000000000000 ]---
RIP: 0010:dma_addressing_limited+0x53/0xa0
Code: 8b 93 48 02 00 00 48 39 d1 49 89 d6 4c 0f 42 f1 48 85 d2 4c 0f 44 f1 f6 83 fc 02 00 00 40 75 0a 48 89 df e8 1f 09 00 00 eb 24 <4c> 8b 1c 25 a0 00 00 00 4d 85 db 74 17 48 89 df 41 ba 8b 84 2d 55
RSP: 0018:ffffa8d2c12cf740 EFLAGS: 00010202
RAX: 00000000ffffffff RBX: ffff8948820220c8 RCX: 000000ffffffffff
RDX: 0000000000000000 RSI: ffffffffc124dc6d RDI: ffff8948820220c8
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff894883c3f040
R13: ffff89488dac8828 R14: 000000ffffffffff R15: ffff8948820220c8
FS: 00007fe6ba881900(0000) GS:ffff894fdf700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 0000000111984000 CR4: 0000000000f50ef0
PKRU: 55555554
Fixes: b5c58b2fdc42 ("dma-mapping: direct calls for dma-iommu")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219292
Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
|
|
Many architectures support load acquire which can replace a memory
barrier and save some cycles.
A typical sequence
do {
seq = read_seqcount_begin(&s);
<something>
} while (read_seqcount_retry(&s, seq);
requires 13 cycles on an N1 Neoverse arm64 core (Ampere Altra, to be
specific) for an empty loop. Two read memory barriers are needed. One
for each of the seqcount_* functions.
We can replace the first read barrier with a load acquire of the
seqcount which saves us one barrier.
On the Altra doing so reduces the cycle count from 13 to 8.
According to ARM, this is a general improvement for the ARM64
architecture and not specific to a certain processor.
See
https://developer.arm.com/documentation/102336/0100/Load-Acquire-and-Store-Release-instructions
"Weaker ordering requirements that are imposed by Load-Acquire and
Store-Release instructions allow for micro-architectural
optimizations, which could reduce some of the performance impacts that
are otherwise imposed by an explicit memory barrier.
If the ordering requirement is satisfied using either a Load-Acquire
or Store-Release, then it would be preferable to use these
instructions instead of a DMB"
[ NOTE! This is my original minimal patch that unconditionally switches
over to using smp_load_acquire(), instead of the much more involved
and subtle patch that Christoph Lameter wrote that made it
conditional.
But Christoph gets authorship credit because I had initially thought
that we needed the more complex model, and Christoph ran with it it
and did the work. Only after looking at code generation for all the
relevant architectures, did I come to the conclusion that nobody
actually really needs the old "smp_rmb()" model.
Even architectures without load-acquire support generally do as well
or better with smp_load_acquire().
So credit to Christoph, but if this then causes issues on other
architectures, put the blame solidly on me.
Also note as part of the ruthless simplification, this gets rid of the
overly subtle optimization where some code uses a non-barrier version
of the sequence count (see the __read_seqcount_begin() users in
fs/namei.c). They then play games with their own barriers and/or with
nested sequence counts.
Those optimizations are literally meaningless on x86, and questionable
elsewhere. If somebody can show that they matter, we need to re-do
them more cleanly than "use an internal helper". - Linus ]
Signed-off-by: Christoph Lameter (Ampere) <cl@gentwo.org>
Link: https://lore.kernel.org/all/20240912-seq_optimize-v3-1-8ee25e04dffa@gentwo.org/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This doesn't actually matter for any of the current users, but before
merging it mainline, make sure we don't have any surprising semantics.
We don't actually want to use an inline function here, because we want
to allow - but not require - const pointer arguments, and return them as
such. But we already had a local auto-type variable, so let's just use
it to avoid any possible double evaluation.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The direct calls from mapping.c all guarded by use_dma_iommu(), so don't
bother to provide stubs, but instead just expose the prototypes
unconditionally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
|
|
Commit b5c58b2fdc42 ("dma-mapping: direct calls for dma-iommu") switched
to use direct calls to dma-iommu, but missed the dma_vmap_noncontiguous,
dma_vunmap_noncontiguous and dma_mmap_noncontiguous behavior keyed off the
presence of the alloc_noncontiguous method.
Fix this by removing the now unused alloc_noncontiguous and
free_noncontiguous methods and moving the vmapping and mmaping of the
noncontiguous allocations into the iommu code, as it is the only provider
of actually noncontiguous allocations.
Fixes: b5c58b2fdc42 ("dma-mapping: direct calls for dma-iommu")
Reported-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
Tested-by: Xi Ruoyao <xry111@xry111.site>
|
|
The below warning is triggered when building with arm
multi_v7_defconfig.
kernel/events/core.c: In function 'perf_event_setup_cpumask':
kernel/events/core.c:14012:13: warning: the comparison will always evaluate as 'true' for the address of 'thread_sibling' will never be NULL [-Waddress]
14012 | if (!topology_sibling_cpumask(cpu)) {
The perf_event_init_cpu() may be invoked at the early boot stage, while
the topology_*_cpumask hasn't been initialized yet. The check is to
specially handle the case, and initialize the perf_online_<domain>_masks
on the boot CPU.
X86 uses a per-cpu cpumask pointer, which could be NULL at the early
boot stage. However, ARM uses a global variable, which never be NULL.
Use perf_online_mask as an indicator instead. Only initialize the
perf_online_<domain>_masks when perf_online_mask is empty.
Fix a typo as well.
Fixes: 4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20240911153854.240bbc1f@canb.auug.org.au/
Reported-by: Steven Price <steven.price@arm.com>
Closes: https://lore.kernel.org/lkml/1835eb6d-3e05-47f3-9eae-507ce165c3bf@arm.com/
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Variable en_dev is not effectively used, so delete it.
drivers/infiniband/hw/bnxt_re/main.c:1980:22: warning: variable ‘en_dev’ set but not used.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10867
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://patch.msgid.link/20240918021632.36091-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240920153430.503212-12-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all clk drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240909144026.870565-2-u.kleine-koenig@baylibre.com
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
syzbot reported a null-ptr-deref in bch2_fs_start. [0]
When a sb is marked clear but doesn't have a clean section
bch2_read_superblock_clean returns NULL which PTR_ERR_OR_ZERO
lets through, eventually leading to a null ptr dereference down
the line. Adjust read sb clean to return an ERR_PTR indicating the
invalid clean section.
[0] https://syzkaller.appspot.com/bug?extid=1cecc37d87c4286e5543
Reported-by: syzbot+1cecc37d87c4286e5543@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1cecc37d87c4286e5543
Signed-off-by: Diogo Jahchan Koike <djahchankoike@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The header files bbpos.h is included twice in backpointers.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10783
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This factors out ec_strie_head_devs_update(), which initializes the
bitmap of devices we're allocating from, and runs it every time
c->rw_devs_change_count changes.
We also cancel pending, not allocated stripes, since they may refer to
devices that are no longer available.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
Guenter Roeck
Masahiro Yamada
Andrea Righi
Tejun Heo
Linus Torvalds
Jaegeuk Kim
Pat Somaru
Yu Liao
Chen Ni
Mukesh Ojha
Ilpo Järvinen
Detlev Casanova
Haibo Chen
Rob Herring (Arm)
Jinjie Ruan
Hans de Goede
Tzung-Bi Shih
Liao Chen
John B. Wyatt IV
Yuezhang Mo
Daniel Yang
Dmitry Torokhov
Leon Romanovsky
Christoph Lameter (Ampere)
Christoph Hellwig
Kan Liang
Jiapeng Chong
Uwe Kleine-König
Diogo Jahchan Koike
Yang Li
Kent Overstreet