| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Allow allocation of more entries in the rc_pages[] array when the
maximum size of an RPC message is increased.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
As a step towards making NFSD's maximum rsize and wsize variable at
run-time, make sk_pages a flexible array.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: This array is no longer used.
On a system with 8-byte pointers and 4KB pages, pahole reports that
the rq_vec[] array accounts for 4144 bytes.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: This API is no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If we can get rid of all uses of rq_vec, then it can be removed.
Replace one use of rqstp::rq_vec with rqstp::rq_bvec.
The feeling of layering violation grows stronger now that
<linux/sunrpc/xdr.h> is included in fs/nfsd/vfs.c.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Prepare xdr_buf_to_bvec() to be invoked from upper layer protocol
code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
All three call sites do the same thing.
I'm struggling with this a bit, however. struct xdr_buf is an XDR
layer object and unmarshaling a WRITE payload is clearly a task
intended to be done by the proc and xdr functions, not by VFS. This
feels vaguely like a layering violation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If we can get rid of all uses of rq_vec, then it can be removed.
Replace one use of rqstp::rq_vec with rqstp::rq_bvec.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
As a step towards making NFSD's maximum rsize and wsize variable at
run-time, replace the fixed-size rq_bvec[] array in struct svc_rqst
with a chunk of dynamically-allocated memory.
The rq_bvec[] array contains enough bio_vecs to handle each page in
a maximum size RPC message.
On a system with 8-byte pointers and 4KB pages, pahole reports that
the rq_bvec[] array is 4144 bytes. This patch replaces that array
with a single 8-byte pointer field.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
As a step towards making NFSD's maximum rsize and wsize variable at
run-time, replace the fixed-size rq_vec[] array in struct svc_rqst
with a chunk of dynamically-allocated memory.
On a system with 8-byte pointers and 4KB pages, pahole reports that
the rq_pages[] array is 2080 bytes. This patch replaces that with
a single 8-byte pointer field.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The server's backchannel uses struct svc_rqst, but does not use the
pages in svc_rqst::rq_pages. It's rq_arg::pages and rq_res::pages
comes from the RPC client's page allocator. Currently,
svc_init_buffer() skips allocating pages in rq_pages for that
reason.
Except that, svc_rqst::rq_pages is filled anyway when a backchannel
svc_rqst is passed to svc_recv() -> and then to svc_alloc_arg().
This isn't really a problem at the moment, except that these pages
are allocated but then never used, as far as I can tell.
The problem is that later in this series, in addition to populating
the entries of rq_pages[], svc_init_buffer() will also allocate the
memory underlying the rq_pages[] array itself. If that allocation is
skipped, then svc_alloc_args() chases a NULL pointer for ingress
backchannel requests.
This approach avoids introducing extra conditional logic in
svc_alloc_args(), which is a hot path.
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This page count is to be used to allocate various arrays of pages
and bio_vecs, replacing the fixed RPCSVC_MAXPAGES value.
The documenting comment is somewhat stale -- of course NFSv4
COMPOUND procedures may have multiple payloads.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There is an upper bound on the number of rdma_rw contexts that can
be created per QP.
This invisible upper bound is because rdma_create_qp() adds one or
more additional SQEs for each ctxt that the ULP requests via
qp_attr.cap.max_rdma_ctxs. The QP's actual Send Queue length is on
the order of the sum of qp_attr.cap.max_send_wr and a factor times
qp_attr.cap.max_rdma_ctxs. The factor can be up to three, depending
on whether MR operations are required before RDMA Reads.
This limit is not visible to RDMA consumers via dev->attrs. When the
limit is surpassed, QP creation fails with -ENOMEM. For example:
svcrdma's estimate of the number of rdma_rw contexts it needs is
three times the number of pages in RPCSVC_MAXPAGES. When MAXPAGES
is about 260, the internally-computed SQ length should be:
64 credits + 10 backlog + 3 * (3 * 260) = 2414
Which is well below the advertised qp_max_wr of 32768.
If RPCSVC_MAXPAGES is increased to 4MB, that's 1040 pages:
64 credits + 10 backlog + 3 * (3 * 1040) = 9434
However, QP creation fails. Dynamic printk for mlx5 shows:
calc_sq_size:618:(pid 1514): send queue size (9326 * 256 / 64 -> 65536) exceeds limits(32768)
Although 9326 is still far below qp_max_wr, QP creation still
fails.
Because the total SQ length calculation is opaque to RDMA consumers,
there doesn't seem to be much that can be done about this except for
consumers to try to keep the requested rdma_rw ctxt count low.
Fixes: 2da0f610e733 ("svcrdma: Increase the per-transport rw_ctx count")
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Observability here is now covered by static tracepoints.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Observability here is now covered by static tracepoints.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Observability here is now covered by static tracepoints.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Observability here is now covered by static tracepoints.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Observability here is now covered by static tracepoints.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Observability here is now covered by static tracepoints.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Observability here is now covered by static tracepoints.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There isn't a common helper for getattrs, so add these into the
protocol-specific helpers.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Observe the start of NFS READDIR operations.
The NFS READDIR's count argument can be interesting when tuning a
client's readdir behavior.
However, the count argument is not passed to nfsd_readdir(). To
properly capture the count argument, this tracepoint must appear in
each proc function before the nfsd_readdir() call.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Observe the start of RENAME operations for all NFS versions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Observe the start of UNLINK, REMOVE, and RMDIR operations for all
NFS versions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Observe the start of NFS LINK operations.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Observe the start of SYMLINK operations for all NFS versions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Observe the start of file and directory creation for all NFS
versions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Replace the dprintk in nfsd_lookup_dentry() with a trace point.
nfsd_lookup_dentry() is called frequently enough that enabling this
dprintk call site would result in log floods and performance issues.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Turn Sargun's internal kprobe based implementation of this into a normal
static tracepoint. Also, remove the dprintk's that got added recently
with the fix for zero-length ACLs.
Cc: Sargun Dillon <sargun@sargun.me>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Introduce tracing helpers that can be used before the procedure
status code is known. These macros are similar to the
SVC_RQST_ENDPOINT helpers, but they can be modified to include
NFS-specific fields if that is needed later.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Record and emit presentation addresses using tracing helpers
designed for the task.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
RFC 7862 states that if an NFS server implements a CLONE operation,
it MUST also implement FATTR4_CLONE_BLKSIZE. NFSD implements CLONE,
but does not implement FATTR4_CLONE_BLKSIZE.
Note that in Section 12.2, RFC 7862 claims that
FATTR4_CLONE_BLKSIZE is RECOMMENDED, not REQUIRED. Likely this is
because a minor version is not permitted to add a REQUIRED
attribute. Confusing.
We assume this attribute reports a block size as a count of bytes,
as RFC 7862 does not specify a unit.
Reported-by: Roland Mainz <roland.mainz@nrubsig.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Cc: stable@vger.kernel.org # v6.7+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This user of SHA-256 does not support any other algorithm, so the
crypto_shash abstraction provides no value. Just use the SHA-256
library API instead, which is much simpler and easier to use.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
To handle device removal, svc_rdma_accept() requests removal
notification for the underlying device when accepting a connection.
However svc_rdma_free() is not invoked if svc_rdma_accept() fails.
There needs to be a matching "unregister" in that case; otherwise
the device cannot be removed.
Fixes: c4de97f7c454 ("svcrdma: Handle device removal outside of the CM event handler")
Cc: stable@vger.kernel.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The connection backlog passed to listen() denotes the number of
connections that are fully established, but that have not yet been
accept()ed. If the amount goes above that level, new connection requests
will be dropped on the floor until the value goes down. If all the knfsd
threads are bogged down in (e.g.) disk I/O, new connection attempts can
stall because of this.
For the same rationale that Trond points out in the userland patch [1],
ensure that svc_xprt sockets created by the kernel allow SOMAXCONN
(4096) backlogged connections instead of the 64 that they do today.
[1]: https://lore.kernel.org/linux-nfs/20240308180223.2965601-1-trond.myklebust@hammerspace.com/
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In nfs4_state_start_net(), laundromat_work may access nfsd_ssc through
nfs4_laundromat -> nfsd4_ssc_expire_umount. If nfsd_ssc isn't initialized,
this can cause NULL pointer dereference.
Normally the delayed start of laundromat_work allows sufficient time for
nfsd_ssc initialization to complete. However, when the kernel waits too
long for userspace responses (e.g. in nfs4_state_start_net ->
nfsd4_end_grace -> nfsd4_record_grace_done -> nfsd4_cld_grace_done ->
cld_pipe_upcall -> __cld_pipe_upcall -> wait_for_completion path), the
delayed work may start before nfsd_ssc initialization finishes.
Fix this by moving nfsd_ssc initialization before starting laundromat_work.
Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Neil is planning retirement, and has asked me to replace his Suse
email address with his personal email address. Both addresses
currently route to the same mailbox.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I've been looking at a problem where we see increased RPC timeouts in
clients when the nfs_layout_flexfiles dataserver_timeo value is tuned
very low (6s). This is necessary to ensure quick failover to a different
mirror if a server goes down, but it causes a lot more major RPC timeouts.
Ultimately, the problem is server-side however. It's sometimes doesn't
respond to connection attempts. My theory is that the interrupt handler
runs when a connection comes in, the xprt ends up being enqueued, but it
takes a significant amount of time for the nfsd thread to pick it up.
Currently, the svc_xprt_dequeue tracepoint displays "wakeup-us". This is
the time between the wake_up() call, and the thread dequeueing the xprt.
If no thread was woken, or the thread ended up picking up a different
xprt than intended, then this value won't tell us how long the xprt was
waiting.
Add a new xpt_qtime field to struct svc_xprt and set it in
svc_xprt_enqueue(). When the dequeue tracepoint fires, also store the
time that the xprt sat on the queue in total. Display it as "qtime-us".
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Very useful for gauging how long the vfs_fsync_range() takes.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If the request being processed is not a v4 compound request, then
examining the cstate can have undefined results.
This patch adds a check that the rpc procedure being executed
(rq_procinfo) is the NFSPROC4_COMPOUND procedure.
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When an export policy with xprtsec policy is set with "tls"
and/or "mtls", but an NFS client is doing a v3 xprtsec=tls
mount, then NLM locking calls fail with an error because
there is currently no support for NLM with TLS.
Until such support is added, allow NLM calls under TLS-secured
policy.
Fixes: 4cc9b9f2bf4d ("nfsd: refine and rename NFSD_MAY_LOCK")
Cc: stable@vger.kernel.org
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
It can be removed since svc_fill_write_vector already has the
same WARN_ON_ONCE.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
NFSD currently has two separate code paths for handling read
requests. One uses page splicing; the other is a traditional read
based on an iov iterator.
Because most Linux file systems support splice read, the latter
does not get nearly the same test experience as splice reads.
To force the use of vectored reads for testing and benchmarking,
introduce the ability to disable splice reads for all NFS READ
operations.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Create a small sandbox under /sys/kernel/debug for experimental NFS
server feature settings. There is no API/ABI compatibility guarantee
for these settings.
The only documentation for such settings, if any documentation exists,
is in the kernel source code.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
As of now nfsd calls create_proc_exports_entry() at start of init_nfsd
and cleanup by remove_proc_entry() at last of exit_nfsd.
Which causes kernel OOPs if there is race between below 2 operations:
(i) exportfs -r
(ii) mount -t nfsd none /proc/fs/nfsd
for 5.4 kernel ARM64:
CPU 1:
el1_irq+0xbc/0x180
arch_counter_get_cntvct+0x14/0x18
running_clock+0xc/0x18
preempt_count_add+0x88/0x110
prep_new_page+0xb0/0x220
get_page_from_freelist+0x2d8/0x1778
__alloc_pages_nodemask+0x15c/0xef0
__vmalloc_node_range+0x28c/0x478
__vmalloc_node_flags_caller+0x8c/0xb0
kvmalloc_node+0x88/0xe0
nfsd_init_net+0x6c/0x108 [nfsd]
ops_init+0x44/0x170
register_pernet_operations+0x114/0x270
register_pernet_subsys+0x34/0x50
init_nfsd+0xa8/0x718 [nfsd]
do_one_initcall+0x54/0x2e0
CPU 2 :
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
PC is at : exports_net_open+0x50/0x68 [nfsd]
Call trace:
exports_net_open+0x50/0x68 [nfsd]
exports_proc_open+0x2c/0x38 [nfsd]
proc_reg_open+0xb8/0x198
do_dentry_open+0x1c4/0x418
vfs_open+0x38/0x48
path_openat+0x28c/0xf18
do_filp_open+0x70/0xe8
do_sys_open+0x154/0x248
Sometimes it crashes at exports_net_open() and sometimes cache_seq_next_rcu().
and same is happening on latest 6.14 kernel as well:
[ 0.000000] Linux version 6.14.0-rc5-next-20250304-dirty
...
[ 285.455918] Unable to handle kernel paging request at virtual address 00001f4800001f48
...
[ 285.464902] pc : cache_seq_next_rcu+0x78/0xa4
...
[ 285.469695] Call trace:
[ 285.470083] cache_seq_next_rcu+0x78/0xa4 (P)
[ 285.470488] seq_read+0xe0/0x11c
[ 285.470675] proc_reg_read+0x9c/0xf0
[ 285.470874] vfs_read+0xc4/0x2fc
[ 285.471057] ksys_read+0x6c/0xf4
[ 285.471231] __arm64_sys_read+0x1c/0x28
[ 285.471428] invoke_syscall+0x44/0x100
[ 285.471633] el0_svc_common.constprop.0+0x40/0xe0
[ 285.471870] do_el0_svc_compat+0x1c/0x34
[ 285.472073] el0_svc_compat+0x2c/0x80
[ 285.472265] el0t_32_sync_handler+0x90/0x140
[ 285.472473] el0t_32_sync+0x19c/0x1a0
[ 285.472887] Code: f9400885 93407c23 937d7c27 11000421 (f86378a3)
[ 285.473422] ---[ end trace 0000000000000000 ]---
It reproduced simply with below script:
while [ 1 ]
do
/exportfs -r
done &
while [ 1 ]
do
insmod /nfsd.ko
mount -t nfsd none /proc/fs/nfsd
umount /proc/fs/nfsd
rmmod nfsd
done &
So exporting interfaces to user space shall be done at last and
cleanup at first place.
With change there is no Kernel OOPs.
Co-developed-by: Shubham Rana <s9.rana@samsung.com>
Signed-off-by: Shubham Rana <s9.rana@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
With rpc_status netlink support, unregister of register_filesystem()
was missed in case of genl_register_family() fails.
Correcting it by making new label.
Fixes: bd9d6a3efa97 ("NFSD: add rpc_status netlink support")
Cc: stable@vger.kernel.org
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When cache cleanup runs concurrently with cache entry removal, a race
condition can occur that leads to incorrect nextcheck times. This can
delay cache cleanup for the cache_detail by up to 1800 seconds:
1. cache_clean() sets nextcheck to current time plus 1800 seconds
2. While scanning a non-empty bucket, concurrent cache entry removal can
empty that bucket
3. cache_clean() finds no cache entries in the now-empty bucket to update
the nextcheck time
4. This maybe delays the next scan of the cache_detail by up to 1800
seconds even when it should be scanned earlier based on remaining
entries
Fix this by moving the hash_lock acquisition earlier in cache_clean().
This ensures bucket emptiness checks and nextcheck updates happen
atomically, preventing the race between cleanup and entry removal.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The cache_detail structure uses a "nextcheck" field to control hash table
scanning intervals. When a table scan begins, nextcheck is set to current
time plus 1800 seconds. During scanning, if cache_detail is not empty and
a cache entry's expiry time is earlier than the current nextcheck, the
nextcheck is updated to that expiry time.
This mechanism ensures that:
1) Empty cache_details are scanned every 1800 seconds to avoid unnecessary
scans
2) Non-empty cache_details are scanned based on the earliest expiry time
found
However, when adding a new cache entry to an empty cache_detail, the
nextcheck time was not being updated, remaining at 1800 seconds. This
could delay cache cleanup for up to 1800 seconds, potentially blocking
threads(such as nfsd) that are waiting for cache cleanup.
Fix this by updating the nextcheck time whenever a new cache entry is
added.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Help the client resolve the race between the reply to an
asynchronous COPY reply and the associated CB_OFFLOAD callback by
planting the session, slot, and sequence number of the COPY in the
CB_SEQUENCE contained in the CB_OFFLOAD COMPOUND.
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The slot index number of the current COMPOUND has, until now, not
been needed outside of nfsd4_sequence(). But to record the tuple
that represents a referring call, the slot number will be needed
when processing subsequent operations in the COMPOUND.
Refactor the code that allocates a new struct nfsd4_slot to ensure
that the new sl_index field is always correctly initialized.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
Chuck Lever
Jeff Layton
Eric Biggers
Li Lingfeng
NeilBrown
Olga Kornievskaia
Guoqing Jiang
Maninder Singh
Long Li