| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Running the following commands was broken:
# cd /sys/kernel/tracing
# echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter
# echo 1 > events/syscalls/sys_enter_openat/enable
# ls /proc/$$/maps
# cat trace
And would produce nothing when it should have produced something like:
ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)
Add a test to check this case so that it will be caught if it breaks
again.
Link: https://lore.kernel.org/linux-trace-kernel/20250417183003.505835fb@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/20250418101208.38dc81f5@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Communicating with the hypervisor using the shared GHCB page requires
clearing the C bit in the mapping of that page. When executing in the
context of the EFI boot services, the page tables are owned by the
firmware, and this manipulation is not possible.
So switch to a different API for accepting memory in SEV-SNP guests, one
which is actually supported at the point during boot where the EFI stub
may need to accept memory, but the SEV-SNP init code has not executed
yet.
For simplicity, also switch the memory acceptance carried out by the
decompressor when not booting via EFI - this only involves the
allocation for the decompressed kernel, and is generally only called
after kexec, as normal boot will jump straight into the kernel from the
EFI stub.
Fixes: 6c3211796326 ("x86/sev: Add SNP-specific unaccepted memory support")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250404082921.2767593-8-ardb+git@google.com # discussion thread #1
Link: https://lore.kernel.org/r/20250410132850.3708703-2-ardb+git@google.com # discussion thread #2
Link: https://lore.kernel.org/r/20250417202120.1002102-2-ardb+git@google.com # final submission
|
|
Erratum 1054 affects AMD Zen processors that are a part of Family 17h
Models 00-2Fh and the workaround is to not set HWCR[IRPerfEn]. However,
when X86_FEATURE_ZEN1 was introduced, the condition to detect unaffected
processors was incorrectly changed in a way that the IRPerfEn bit gets
set only for unaffected Zen 1 processors.
Ensure that HWCR[IRPerfEn] is set for all unaffected processors. This
includes a subset of Zen 1 (Family 17h Models 30h and above) and all
later processors. Also clear X86_FEATURE_IRPERF on affected processors
so that the IRPerfCount register is not used by other entities like the
MSR PMU driver.
Fixes: 232afb557835 ("x86/CPU/AMD: Add X86_FEATURE_ZEN1")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/caa057a9d6f8ad579e2f1abaa71efbd5bd4eaf6d.1744956467.git.sandipan.das@amd.com
|
|
There is a problem with page pools not dma-unmapping immediately when
the device is going down, and delaying it until the page pool is
destroyed, which is not allowed (see links). That just got fixed for
normal page pools, and we need to address memory providers as well.
Unmap pages in the memory provider uninstall callback, and protect it
with a new lock. There is also a gap between when a dma mapping is
created and the mp is installed, so if the device is killed in between,
io_uring would be holding on to dma mappings to a dead device with no
one to call ->uninstall. Move it to page pool init and rely on
->is_mapped to make sure it's only done once.
Link: https://lore.kernel.org/lkml/8067f204-1380-4d37-8ffd-007fc6f26738@kernel.org/T/
Link: https://lore.kernel.org/all/20250409-page-pool-track-dma-v9-0-6a9ef2e0cba8@redhat.com/
Fixes: 34a3e60821ab9 ("io_uring/zcrx: implement zerocopy receive pp memory provider")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ef9b7db249b14f6e0b570a1bb77ff177389f881c.1744965853.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The filter string testing uses strncpy_from_kernel/user_nofault() to
retrieve the string to test the filter against. The if() statement was
incorrect as it considered 0 as a fault, when it is only negative that it
faulted.
Running the following commands:
# cd /sys/kernel/tracing
# echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter
# echo 1 > events/syscalls/sys_enter_openat/enable
# ls /proc/$$/maps
# cat trace
Would produce nothing, but with the fix it will produce something like:
ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)
Link: https://lore.kernel.org/all/CAEf4BzbVPQ=BjWztmEwBPRKHUwNfKBkS3kce-Rzka6zvbQeVpg@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250417183003.505835fb@gandalf.local.home
Fixes: 77360f9bbc7e5 ("tracing: Add test for user space strings when filtering on string pointers")
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Reported-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The PXP terminate debugfs currently unconditionally simulates a
termination, no matter what the HW status is. This is unneeded if PXP is
not in use and can cause errors if the HW init hasn't completed yet.
To solve these issues, we can simply limit the terminations to the cases
where PXP is fully initialized and in use.
v2: s/pxp_status/ready/ to avoid confusion with pxp->status (John)
Fixes: 385a8015b214 ("drm/xe/pxp: Add PXP debugfs support")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4749
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250416201622.1295369-1-daniele.ceraolospurio@intel.com
(cherry picked from commit ba1f62a0cac84757ca35f4217e3cd3a2654233ae)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The is_vram() is checking the current placement, however if we consider
exported VRAM with dynamic dma-buf, it looks possible for the xe driver
to async evict the memory, notifying the importer, however importer does
not have to call unmap_attachment() immediately, but rather just as
"soon as possible", like when the dma-resv idles. Following from this we
would then pipeline the move, attaching the fence to the manager, and
then update the current placement. But when the unmap_attachment() runs
at some later point we might see that is_vram() is now false, and take
the complete wrong path when dma-unmapping the sg, leading to
explosions.
To fix this check if the sgl was mapping a struct page.
v2:
- The attachment can be mapped multiple times it seems, so we can't
really rely on encoding something in the attachment->priv. Instead
see if the page_link has an encoded struct page. For vram we expect
this to be NULL.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4563
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250410162716.159403-2-matthew.auld@intel.com
(cherry picked from commit d755887f8e5a2a18e15e6632a5193e5feea18499)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
User is reporting what smells like notifier vs folio deadlock, where
migrate_pages_batch() on core kernel side is holding folio lock(s) and
then interacting with the mappings of it, however those mappings are
tied to some userptr, which means calling into the notifier callback and
grabbing the notifier lock. With perfect timing it looks possible that
the pages we pulled from the hmm fault can get sniped by
migrate_pages_batch() at the same time that we are holding the notifier
lock to mark the pages as accessed/dirty, but at this point we also want
to grab the folio locks(s) to mark them as dirty, but if they are
contended from notifier/migrate_pages_batch side then we deadlock since
folio lock won't be dropped until we drop the notifier lock.
Fortunately the mark_page_accessed/dirty is not really needed in the
first place it seems and should have already been done by hmm fault, so
just remove it.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4765
Fixes: 0a98219bcc96 ("drm/xe/hmm: Don't dereference struct page pointers without notifier lock")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250414132539.26654-2-matthew.auld@intel.com
(cherry picked from commit bd7c0cb695e87c0e43247be8196b4919edbe0e85)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The metadata saved in the ADS is read by GuC when it's initialized.
Saving the addresses to the LRCs when they are populated is too late as
GuC will keep using the old ones.
This was causing GuC to use the RCS LRC for any engine class. It's not a
big problem on a Linux-only scenario since the they are used by GuC only
on media engines when the watchdog is triggered. However, in a
virtualization scenario with Windows as the VF, it causes the wrong LRCs
to be loaded as the watchdog is used for all engines.
Fix it by letting guc_golden_lrc_init() initialize the metadata, like
other *_init() functions, and later guc_golden_lrc_populate() to copy
the LRCs to the right places. The former is called before the second GuC
load, while the latter is called after LRCs have been recorded.
Cc: Chee Yin Wong <chee.yin.wong@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org> # v6.11+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Chee Yin Wong <chee.yin.wong@intel.com>
Link: https://lore.kernel.org/r/20250409-fix-guc-ads-v1-1-494135f7a5d0@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit c31a0b6402d15b530514eee9925adfcb8cfbb1c9)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
ftrace_graph_ent.depth is int, but ftrace_graph_ent_entry.depth is
unsigned long. This confuses trace-cmd on 64-bit big-endian systems and
makes it print a huge amount of spaces. Fix this by using unsigned int,
which has a matching size, instead.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250412221847.17310-2-iii@linux.ibm.com
Fixes: ff5c9c576e75 ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The maximum of the ftrace hash bits is made fls(32) in
register_ftrace_direct(), which seems illogical. So, we fix it by making
the max hash bits FTRACE_HASH_MAX_BITS instead.
Link: https://lore.kernel.org/20250413014444.36724-1-dongml2@chinatelecom.cn
Fixes: d05cb470663a ("ftrace: Fix modification of direct_function hash while in use")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The subops processing creates new hashes when adding and removing subops.
There were some places that the old hashes that were replaced were not
freed and this caused some memory leaks.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417135939.245b128d@gandalf.local.home
Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There's several locations that free a ftrace hash pointer but may be
referenced again. Reset them to EMPTY_HASH so that a u-a-f bug doesn't
happen.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417110933.20ab718b@gandalf.local.home
Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The reworking to fix and simplify the ftrace_startup_subops() and the
ftrace_shutdown_subops() made it possible for the filter_hash and
notrace_hash variables to be used uninitialized in a way that the compiler
did not catch it.
Initialize both filter_hash and notrace_hash to the EMPTY_HASH as that is
what they should be if they never are used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417104017.3aea66c2@gandalf.local.home
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes")
Closes: https://lore.kernel.org/all/1db64a42-626d-4b3a-be08-c65e47333ce2@linux.ibm.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Subvolume roots and the dirents that point to them are special; they
don't obey the normal snapshot versioning rules because they cross
snapshot boundaries.
We don't keep around older versions of subvolume dirents on rename - we
don't need to, because subvolume dirents are only visible in the parent
subvolume, and we wouldn't be able to match up the different dirent and
inode versions due to crossing the snapshot ID boundary.
That means that when we rename a subvolume, that's been snapshotted, the
older version of the subvolume root will become dangling - it won't have
a dirent that points to it.
That's expected, we just need to tell fsck that this is ok.
Fixes: https://github.com/koverstreet/bcachefs/issues/856
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
kbuf imports have the front offset adjusted and segments removed, but
the tail segments are still included in the segment count that gets
passed in the iov_iter. As the segments aren't necessarily all the
same size, move importing to a separate helper and iterate the
mapped length to get an exact count.
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since cpufreq_driver_resolve_freq() can run in parallel with
cpufreq_set_policy() and there is no synchronization between them,
the former may access policy->min and policy->max while the latter
is updating them and it may see intermediate values of them due
to the way the update is carried out. Also the compiler is free
to apply any optimizations it wants both to the stores in
cpufreq_set_policy() and to the loads in cpufreq_driver_resolve_freq()
which may result in additional inconsistencies.
To address this, use WRITE_ONCE() when updating policy->min and
policy->max in cpufreq_set_policy() and use READ_ONCE() for reading
them in cpufreq_driver_resolve_freq(). Moreover, rearrange the update
in cpufreq_set_policy() to avoid storing intermediate values in
policy->min and policy->max with the help of the observation that
their new values are expected to be properly ordered upfront.
Also modify cpufreq_driver_resolve_freq() to take the possible reverse
ordering of policy->min and policy->max, which may happen depending on
the ordering of operations when this function and cpufreq_set_policy()
run concurrently, into account by always honoring the max when it
turns out to be less than the min (in case it comes from thermal
throttling or similar).
Fixes: 151717690694 ("cpufreq: Make policy min/max hard requirements")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/5907080.DvuYhMxLoT@rjwysocki.net
|
|
Notice that ignore_dl_rate_limit() need not piggy back on the
limits_changed handling to achieve its goal (which is to enforce a
frequency update before its due time).
Namely, if sugov_should_update_freq() is updated to check
sg_policy->need_freq_update and return 'true' if it is set when
sg_policy->limits_changed is not set, ignore_dl_rate_limit() may
set the former directly instead of setting the latter, so it can
avoid hitting the memory barrier in sugov_should_update_freq().
Update the code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/10666429.nUPlyArG6x@rjwysocki.net
|
|
The handling of the limits_changed flag in struct sugov_policy needs to
be explicitly synchronized to ensure that cpufreq policy limits updates
will not be missed in some cases.
Without that synchronization it is theoretically possible that
the limits_changed update in sugov_should_update_freq() will be
reordered with respect to the reads of the policy limits in
cpufreq_driver_resolve_freq() and in that case, if the limits_changed
update in sugov_limits() clobbers the one in sugov_should_update_freq(),
the new policy limits may not take effect for a long time.
Likewise, the limits_changed update in sugov_limits() may theoretically
get reordered with respect to the updates of the policy limits in
cpufreq_set_policy() and if sugov_should_update_freq() runs between
them, the policy limits change may be missed.
To ensure that the above situations will not take place, add memory
barriers preventing the reordering in question from taking place and
add READ_ONCE() and WRITE_ONCE() annotations around all of the
limits_changed flag updates to prevent the compiler from messing up
with that code.
Fixes: 600f5badb78c ("cpufreq: schedutil: Don't skip freq update when limits change")
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3376719.44csPzL39Z@rjwysocki.net
|
|
Commit 8e461a1cb43d ("cpufreq: schedutil: Fix superfluous updates caused
by need_freq_update") modified sugov_should_update_freq() to set the
need_freq_update flag only for drivers with CPUFREQ_NEED_UPDATE_LIMITS
set, but that flag generally needs to be set when the policy limits
change because the driver callback may need to be invoked for the new
limits to take effect.
However, if the return value of cpufreq_driver_resolve_freq() after
applying the new limits is still equal to the previously selected
frequency, the driver callback needs to be invoked only in the case
when CPUFREQ_NEED_UPDATE_LIMITS is set (which means that the driver
specifically wants its callback to be invoked every time the policy
limits change).
Update the code accordingly to avoid missing policy limits changes for
drivers without CPUFREQ_NEED_UPDATE_LIMITS.
Fixes: 8e461a1cb43d ("cpufreq: schedutil: Fix superfluous updates caused by need_freq_update")
Closes: https://lore.kernel.org/lkml/Z_Tlc6Qs-tYpxWYb@linaro.org/
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3010358.e9J7NaK4W3@rjwysocki.net
|
|
The QDMA packet scheduler suffers from a performance issue.
Fix this by picking up changes from MediaTek's SDK which change to use
Token Bucket instead of Leaky Bucket and fix the SPEED_1000 configuration.
Fixes: 160d3a9b1929 ("net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/18040f60f9e2f5855036b75b28c4332a2d2ebdd8.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Without this patch, the maximum weight of the queue limit will be
incorrect when linked at 100Mbps due to an apparent typo.
Fixes: f63959c7eec31 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/74111ba0bdb13743313999ed467ce564e8189006.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the current method, the MDC divider was reset to the default setting
of 2.5MHz after the NETSYS SER. Therefore, we need to reapply the MDC
divider configuration function in mtk_hw_init() after reset.
Fixes: c0a440031d431 ("net: ethernet: mtk_eth_soc: set MDIO bus clock frequency")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/8ab7381447e6cdcb317d5b5a6ddd90a1734efcb0.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sending exact nr_segs, avoids bio split check and processing in
block layer, which takes around 5%[1] of overall CPU utilization.
In our setup, we see overall improvement of IOPS from 7.15M to 7.65M [2]
and 5% less CPU utilization.
[1]
3.52% io_uring [kernel.kallsyms] [k] bio_split_rw_at
1.42% io_uring [kernel.kallsyms] [k] bio_split_rw
0.62% io_uring [kernel.kallsyms] [k] bio_submit_split
[2]
sudo taskset -c 0,1 ./t/io_uring -b512 -d128 -c32 -s32 -p1 -F1 -B1 -n2
-r4 /dev/nvme0n1 /dev/nvme1n1
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
[Pavel: fixed for kbuf, rebased and reworked on top of cleanups]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7a1a49a8d053bd617c244291d63dbfbc07afde36.1744882081.git.asml.silence@gmail.com
[axboe: fold in fix factoring in buf reg offset]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_import_fixed is a mess. Even though we know the final len of the
iterator, we still assign offset + len and do some magic after to
correct for that.
Do offset calculation first and finalise it with iov_iter_bvec at the
end.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2d5107fed24f8b23245ef2ede9a5a7f7c426df61.1744882081.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Kernel registered buffers are special because segments are not uniform
in size, and we have a bunch of optimisations based on that uniformity
for normal buffers. Handle kbuf separately, it'll be cleaner this way.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4e9e5990b0ab5aee723c0be5cd9b5bcf810375f9.1744882081.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't optimise for requests with offset=0. Large registered buffers are
the preference and hence the user is likely to pass an offset, and the
adjustments are not expensive and will be made even cheaper in following
patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1c2beb20470ee3c886a363d4d8340d3790db19f3.1744882081.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
From PMU's perspective, Panther Lake is similar to the previous
generation Lunar Lake. Both are hybrid platforms, with e-core and
p-core.
The key differences are the ARCH PEBS feature and several new events.
The ARCH PEBS is supported in the following patches.
The new events will be supported later in perf tool.
Share the code path with the Lunar Lake. Only update the name.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20250415114428.341182-2-dapeng1.mi@linux.intel.com
|
|
Currently when a user samples user space GPRs (--user-regs option) with
PEBS, the user space GPRs actually always come from software PMI
instead of from PEBS hardware. This leads to the sampled GPRs to
possibly be inaccurate for single PEBS record case because of the
skid between counter overflow and GPRs sampling on PMI.
For the large PEBS case, it is even worse. If user sets the
exclude_kernel attribute, large PEBS would be used to sample user space
GPRs, but since PEBS GPRs group is not really enabled, it leads to all
samples in the large PEBS record to share the same piece of user space
GPRs, like this reproducer shows:
$ perf record -e branches:pu --user-regs=ip,ax -c 100000 ./foo
$ perf report -D | grep "AX"
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
So enable GPRs group for user space GPRs sampling and prioritize reading
GPRs from PEBS. If the PEBS sampled GPRs is not user space GPRs (single
PEBS record case), perf_sample_regs_user() modifies them to user space
GPRs.
[ mingo: Clarified the changelog. ]
Fixes: c22497f5838c ("perf/x86/intel: Support adaptive PEBS v4")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250415104135.318169-2-dapeng1.mi@linux.intel.com
|
|
The below code would always unconditionally clear other status bits like
perf metrics overflow bit once PEBS buffer overflows:
status &= intel_ctrl | GLOBAL_STATUS_TRACE_TOPAPMI;
This is incorrect. Perf metrics overflow bit should be cleared only when
fixed counter 3 in PEBS counter group. Otherwise perf metrics overflow
could be missed to handle.
Closes: https://lore.kernel.org/all/20250225110012.GK31462@noisy.programming.kicks-ass.net/
Fixes: 7b2c05a15d29 ("perf/x86/intel: Generic support for hardware TopDown metrics")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250415104135.318169-1-dapeng1.mi@linux.intel.com
|
|
Add check for the return value of spi_imx_setupxfer().
spi_imx->rx and spi_imx->tx function pointer can be NULL when
spi_imx_setupxfer() return error, and make NULL pointer dereference.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
0x0
spi_imx_pio_transfer+0x50/0xd8
spi_imx_transfer_one+0x18c/0x858
spi_transfer_one_message+0x43c/0x790
__spi_pump_transfer_message+0x238/0x5d4
__spi_sync+0x2b0/0x454
spi_write_then_read+0x11c/0x200
Signed-off-by: Tamura Dai <kirinode0@gmail.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20250417011700.14436-1-kirinode0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The scale of IIO bandwidth in free running counters is inherited from
the ICX. The counter increments for every 32 bytes rather than 4 bytes.
The IIO bandwidth out free running counters don't increment with a
consistent size. The increment depends on the requested size. It's
impossible to find a fixed increment. Remove it from the event_descs.
Fixes: 0378c93a92e2 ("perf/x86/intel/uncore: Support IIO free-running counters on Sapphire Rapids server")
Reported-by: Tang Jun <dukang.tj@alibaba-inc.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250416142426.3933977-3-kan.liang@linux.intel.com
|
|
There was a mistake in the ICX uncore spec too. The counter increments
for every 32 bytes rather than 4 bytes.
The same as SNR, there are 1 ioclk and 8 IIO bandwidth in free running
counters. Reuse the snr_uncore_iio_freerunning_events().
Fixes: 2b3b76b5ec67 ("perf/x86/intel/uncore: Add Ice Lake server uncore support")
Reported-by: Tang Jun <dukang.tj@alibaba-inc.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250416142426.3933977-2-kan.liang@linux.intel.com
|
|
There was a mistake in the SNR uncore spec. The counter increments for
every 32 bytes of data sent from the IO agent to the SOC, not 4 bytes
which was documented in the spec.
The event list has been updated:
"EventName": "UNC_IIO_BANDWIDTH_IN.PART0_FREERUN",
"BriefDescription": "Free running counter that increments for every 32
bytes of data sent from the IO agent to the SOC",
Update the scale of the IIO bandwidth in free running counters as well.
Fixes: 210cc5f9db7a ("perf/x86/intel/uncore: Add uncore support for Snow Ridge server")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250416142426.3933977-1-kan.liang@linux.intel.com
|
|
The ICSS IEP driver tracks perout and pps enable state with flags.
Currently when disabling pps and perout signals during icss_iep_exit(),
results in NULL pointer dereference for perout.
To fix the null pointer dereference issue, the icss_iep_perout_enable_hw
function can be modified to directly clear the IEP CMP registers when
disabling PPS or PEROUT, without referencing the ptp_perout_request
structure, as its contents are irrelevant in this case.
Fixes: 9b115361248d ("net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/7b1c7c36-363a-4085-b26c-4f210bee1df6@stanley.mountain/
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-4-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is an error check inside emac_xmit_xdp_frame() function which
is called when the driver wants to transmit XDP frame, to check if
the allocated tx descriptor is NULL, if true to exit and return
ICSSG_XDP_CONSUMED implying failure in transmission.
In this case trying to free a descriptor which is NULL will result
in kernel crash due to NULL pointer dereference. Fix this error handling
and increase netdev tx_dropped stats in the caller of this function
if the function returns ICSSG_XDP_CONSUMED.
Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/70d8dd76-0c76-42fc-8611-9884937c82f5@stanley.mountain/
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-3-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During network interface initialization, the NIC driver needs to register
its Rx queue with the XDP, to ensure the incoming XDP buffer carries a
pointer reference to this info and is stored inside xdp_rxq_info.
While this struct isn't tied to XDP prog, if there are any changes in
Rx queue, the NIC driver needs to stop the Rx queue by unregistering
with XDP before purging and reallocating memory. Drop page_pool destroy
during Rx channel reset as this is already handled by XDP during
xdp_rxq_info_unreg (Rx queue unregister), failing to do will cause the
following warning:
warning logs: https://gist.github.com/MeghanaMalladiTI/eb627e5dc8de24e42d7d46572c13e576
Fixes: 46eeb90f03e0 ("net: ti: icssg-prueth: Use page_pool API for RX buffer allocation")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-2-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The blamed commit exposes a possible issue with flow_offload_teardown():
We might remove the offload bit of a conntrack entry that has been
offloaded again.
1. conntrack entry c1 is offloaded via flow f1 (f1->ct == c1).
2. f1 times out and is pushed back to slowpath, c1 offload bit is
removed. Due to bug, f1 is not unlinked from rhashtable right away.
3. a new packet arrives for the flow and re-offload is triggered, i.e.
f2->ct == c1. This is because lookup in flowtable skip entries with
teardown bit set.
4. Next flowtable gc cycle finds f1 again
5. flow_offload_teardown() is called again for f1 and c1 offload bit is
removed again, even though we have f2 referencing the same entry.
This is harmless, but clearly not correct.
Fix the bug that exposes this: set 'teardown = true' to have the gc
callback unlink the flowtable entry from the table right away instead of
the unintentional defer to the next round.
Also prevent flow_offload_teardown() from fixing up the ct state more than
once: We could also be called from the data path or a notifier, not only
from the flowtable gc callback.
NF_FLOW_TEARDOWN can never be unset, so we can use it as synchronization
point: if we observe did not see a 0 -> 1 transition, then another CPU
is already doing the ct state fixups for us.
Fixes: 03428ca5cee9 ("netfilter: conntrack: rework offload nf_conn timeout extension logic")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fix an off-by-one error when setting the vblanking start in
<VBLKSTR>. Commit d6460bd52c27 ("drm/mgag200: Add dedicated
variables for blanking fields") switched the value from
crtc_vdisplay to crtc_vblank_start, which DRM helpers copy
from the former. The commit missed to subtract one though.
Reported-by: Wakko Warner <wakko@animx.eu.org>
Closes: https://lore.kernel.org/dri-devel/CAMwc25rKPKooaSp85zDq2eh-9q4UPZD=RqSDBRp1fAagDnmRmA@mail.gmail.com/
Reported-by: Сергей <afmerlord@gmail.com>
Closes: https://lore.kernel.org/all/5b193b75-40b1-4342-a16a-ae9fc62f245a@gmail.com/
Closes: https://bbs.archlinux.org/viewtopic.php?id=303819
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d6460bd52c27 ("drm/mgag200: Add dedicated variables for blanking fields")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.12+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Wakko Warner <wakko@animx.eu.org>
Link: https://lore.kernel.org/r/20250416083847.51764-1-tzimmermann@suse.de
|
|
Test struct drm_gem_object.import_attach to detect imported objects.
During object clenanup, the dma_buf field might be NULL. Testing it in
an object's free callback then incorrectly does a cleanup as for native
objects. Happens for calls to drm_mode_destroy_dumb_ioctl() that
clears the dma_buf field in drm_gem_object_exported_dma_buf_free().
v3:
- only test for import_attach (Boris)
v2:
- use import_attach.dmabuf instead of dma_buf (Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b57aa47d39e9 ("drm/gem: Test for imported GEM buffers with helper")
Reported-by: Andy Yan <andyshrk@163.com>
Closes: https://lore.kernel.org/dri-devel/38d09d34.4354.196379aa560.Coremail.andyshrk@163.com/
Tested-by: Andy Yan <andyshrk@163.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Anusha Srivatsa <asrivats@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250416065820.26076-1-tzimmermann@suse.de
|
|
Document the lifetime, nolifetime and max_open_zones mount options
added for zoned rt file systems.
Also add documentation describing the max_open_zones sysfs attribute
exposed in /sys/fs/xfs/<dev>/zoned/
Fixes: 4e4d52075577 ("xfs: add the zoned space allocator")
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Add one simple fault inject target, and verify if an application using ublk
device sees an I/O error quickly after the ublk server dies.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now ublk_abort_queue() is moved to ublk char device release handler,
meantime our request queue is "quiesced" because either ->canceling was
set from uring_cmd cancel function or all IOs are inflight and can't be
completed by ublk server, things becomes easy much:
- all uring_cmd are done, so we needn't to mark io as UBLK_IO_FLAG_ABORTED
for handling completion from uring_cmd
- ublk char device is closed, no one can hold IO request reference any more,
so we can simply complete this request or requeue it for ublk_nosrv_should_reissue_outstanding.
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove __ublk_quiesce_dev() and open code for updating device state as
QUIESCED.
We needn't to drain inflight requests in __ublk_quiesce_dev() any more,
because all inflight requests are aborted in ublk char device release
handler.
Also we needn't to set ->canceling in __ublk_quiesce_dev() any more
because it is done unconditionally now in ublk_ch_release().
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are currently two ways in which ublk server exit is detected by
ublk_drv:
1. uring_cmd cancellation. If there are any outstanding uring_cmds which
have not been completed to the ublk server when it exits, io_uring
calls the uring_cmd callback with a special cancellation flag as the
issuing task is exiting.
2. I/O timeout. This is needed in addition to the above to handle the
"saturated queue" case, when all I/Os for a given queue are in the
ublk server, and therefore there are no outstanding uring_cmds to
cancel when the ublk server exits.
There are a couple of issues with this approach:
- It is complex and inelegant to have two methods to detect the same
condition
- The second method detects ublk server exit only after a long delay
(~30s, the default timeout assigned by the block layer). This delays
the nosrv behavior from kicking in and potential subsequent recovery
of the device.
The second issue is brought to light with the new test_generic_06 which
will be added in following patch. It fails before this fix:
selftests: ublk: test_generic_06.sh
dev id is 0
dd: error writing '/dev/ublkb0': Input/output error
1+0 records in
0+0 records out
0 bytes copied, 30.0611 s, 0.0 kB/s
DEAD
dd took 31 seconds to exit (>= 5s tolerance)!
generic_06 : [FAIL]
Fix this by instead detecting and handling ublk server exit in the
character file release callback. This has several advantages:
- This one place can handle both saturated and unsaturated queues. Thus,
it replaces both preexisting methods of detecting ublk server exit.
- It runs quickly on ublk server exit - there is no 30s delay.
- It starts the process of removing task references in ublk_drv. This is
needed if we want to relax restrictions in the driver like letting
only one thread serve each queue
There is also the disadvantage that the character file release callback
can also be triggered by intentional close of the file, which is a
significant behavior change. Preexisting ublk servers (libublksrv) are
dependent on the ability to open/close the file multiple times. To
address this, only transition to a nosrv state if the file is released
while the ublk device is live. This allows for programs to open/close
the file multiple times during setup. It is still a behavior change if a
ublk server decides to close/reopen the file while the device is LIVE
(i.e. while it is responsible for serving I/O), but that would be highly
unusual. This behavior is in line with what is done by FUSE, which is
very similar to ublk in that a userspace daemon is providing services
traditionally provided by the kernel.
With this change in, the new test (and all other selftests, and all
ublksrv tests) pass:
selftests: ublk: test_generic_06.sh
dev id is 0
dd: error writing '/dev/ublkb0': Input/output error
1+0 records in
0+0 records out
0 bytes copied, 0.0376731 s, 0.0 kB/s
DEAD
generic_04 : [PASS]
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_ch_release() is called after ublk char device is closed, when all
uring_cmd are done, so it is perfect fine to move ublk device reset to
ublk_ch_release() from ublk_ctrl_start_recovery().
This way can avoid to grab the exiting daemon task_struct too long.
However, reset of the following ublk IO flags has to be moved until ublk
io_uring queues are ready:
- ubq->canceling
For requeuing IO in case of ublk_nosrv_dev_should_queue_io() before device
is recovered
- ubq->fail_io
For failing IO in case of UBLK_F_USER_RECOVERY_FAIL_IO before device is
recovered
- ublk_io->flags
For preventing using io->cmd
With this way, recovery is simplified a lot.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now ublk deals with ublk_nosrv_dev_should_queue_io() by keeping request
queue as quiesced. This way is fragile because queue quiesce crosses syscalls
or process contexts.
Switch to rely on ubq->canceling for dealing with
ublk_nosrv_dev_should_queue_io(), because it has been used for this purpose
during io_uring context exiting, and it can be reused before recovering too.
In ublk_queue_rq(), the request will be added to requeue list without
kicking off requeue in case of ubq->canceling, and finally requests added in
requeue list will be dispatched from either ublk_stop_dev() or
ublk_ctrl_end_recovery().
Meantime we have to move reset of ubq->canceling from ublk_ctrl_start_recovery()
to ublk_ctrl_end_recovery(), when IO handling can be recovered completely.
Then blk_mq_quiesce_queue() and blk_mq_unquiesce_queue() are always used
in same context.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250416035444.99569-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add ublk_force_abort_dev() for handling ublk_nosrv_dev_should_queue_io()
in ublk_stop_dev(). Then queue quiesce and unquiesce can be paired in
single function.
Meantime not change device state to QUIESCED any more, since the disk is
going to be removed soon.
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Most uring_cmds issued against ublk character devices are serialized
because each command affects only one queue, and there is an early check
which only allows a single task (the queue's ubq_daemon) to issue
uring_cmds against that queue. However, this mechanism does not work for
FETCH_REQs, since they are expected before ubq_daemon is set. Since
FETCH_REQs are only used at initialization and not in the fast path,
serialize them using the per-ublk-device mutex. This fixes a number of
data races that were previously possible if a badly behaved ublk server
decided to issue multiple FETCH_REQs against the same qid/tag
concurrently.
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
test may exit early because of missing program or not having required
feature before calling _prep_test(), then $UBLK_TMP isn't cleaned.
Fix it by moving creating $UBLK_TMP into _prep_test(), any resources
created since _prep_test() will be cleaned by _cleanup_test().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-14-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
Steven Rostedt
Ard Biesheuvel
Sandipan Das
Pavel Begunkov
Daniele Ceraolo Spurio
Matthew Auld
Lucas De Marchi
Ilya Leoshkevich
Menglong Dong
Kent Overstreet
Jens Axboe
Rafael J. Wysocki
Bo-Cun Chen
Nitesh Shetty
Kan Liang
Dapeng Mi
Tamura Dai
Meghana Malladi
Florian Westphal
Thomas Zimmermann
Hans Holmberg
Uday Shankar
Ming Lei