| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The per-CPU data section is handled differently than the other sections.
The memory allocations requires a special __percpu pointer and then the
section is copied into the view of each CPU. Therefore the SHF_ALLOC
flag is removed to ensure move_module() skips it.
Later, relocations are applied and apply_relocations() skips sections
without SHF_ALLOC because they have not been copied. This also skips the
per-CPU data section.
The missing relocations result in a NULL pointer on x86-64 and very
small values on x86-32. This results in a crash because it is not
skipped like NULL pointer would and can't be dereferenced.
Such an assignment happens during static per-CPU lock initialisation
with lockdep enabled.
Allow relocation processing for the per-CPU section even if SHF_ALLOC is
missing.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202506041623.e45e4f7d-lkp@intel.com
Fixes: 1a6100caae425 ("Don't relocate non-allocated regions in modules.") #v2.6.1-rc3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20250610163328.URcsSUC1@linutronix.de
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Message-ID: <20250610163328.URcsSUC1@linutronix.de>
|
|
All error conditions in move_module() set the return value by updating the
ret variable. Therefore, it is not necessary to the initialize the variable
when declaring it.
Remove the unnecessary initialization.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250618122730.51324-3-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Message-ID: <20250618122730.51324-3-petr.pavlu@suse.com>
|
|
The function move_module() uses the variable t to track how many memory
types it has allocated and consequently how many should be freed if an
error occurs.
The variable is initially set to 0 and is updated when a call to
module_memory_alloc() fails. However, move_module() can fail for other
reasons as well, in which case t remains set to 0 and no memory is freed.
Fix the problem by initializing t to MOD_MEM_NUM_TYPES. Additionally, make
the deallocation loop more robust by not relying on the mod_mem_type_t enum
having a signed integer as its underlying type.
Fixes: c7ee8aebf6c0 ("module: add stop-grap sanity check on module memcpy()")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250618122730.51324-2-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Message-ID: <20250618122730.51324-2-petr.pavlu@suse.com>
|
|
The UAPI headers have been split out from the kernel-only headers.
They maintained as part of the bitmap library.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
BITS_PER_LONG does not exist in UAPI headers, so can't be used by the UAPI
__GENMASK(). Instead __BITS_PER_LONG needs to be used.
When __GENMASK() was introduced in commit 3c7a8e190bc5 ("uapi: introduce uapi-friendly macros for GENMASK"),
the code was fine. A broken revert in 1e7933a575ed ("uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"")
introduced the incorrect usage of BITS_PER_LONG.
That was fixed in commit 11fcf368506d ("uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again").
But a broken sync of the kernel headers with the tools/ headers in
commit fc92099902fb ("tools headers: Synchronize linux/bits.h with the kernel sources")
undid the fix.
Reapply the fix and while at it also fix the tools header.
Fixes: fc92099902fb ("tools headers: Synchronize linux/bits.h with the kernel sources")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
Positivo K116J is equipped with ALC269VC, and needs a fix to make
the headset mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20250707114537.8291-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We will copy calibration data from position behind to front.
We have created a variable (tmp_val) point on top of calibration data
buffer, and tmp_val[1] is max of node number in original calibration
data structure, it will be overwritten after first data copy,
so can't be used as max node number check in for loop.
So we create a new variable to save max of node number (tmp_val[1]),
used to check if max node number was reached in for loop.
And a point need to be increased to point at calibration data in node.
Data saved position also need to be increased one byte.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250707090513.1462-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After enabling the clocks each error path must disable the clocks again.
One of them failed to do so. Unify the error paths to use goto to make it
harder for future changes to add a similar bug.
Fixes: 7ca59947b5fc ("pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250704172728.626815-2-u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Commit 9dd42d019e63 ("pwm: Allow pwm state transitions from an invalid
state") intended to allow some state transitions that were not allowed
before. The idea is sane and back then I also got the code comment
right, but the check for enabled is bogus. This resulted in state
transitions for enabled states to be allowed to have invalid duty/period
settings and thus it can happen that low-level drivers get requests for
invalid states🙄.
Invert the check to allow state transitions for disabled states only.
Fixes: 9dd42d019e63 ("pwm: Allow pwm state transitions from an invalid state")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250704172416.626433-2-u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
|
|
futex_numa was never added to the .gitignore file.
Add it.
Fixes: 9140f57c1c13 ("futex,selftests: Add another FUTEX2_NUMA selftest")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/all/20250704103749.10341-1-terry.tritton@linaro.org
|
|
In our testing with 6.12 based kernel on a big.LITTLE system, we were
seeing instances of RT tasks being blocked from running on the LITTLE
cpus for multiple seconds of time, apparently by the dl_server. This
far exceeds the default configured 50ms per second runtime.
This is due to the fair dl_server runtime calculation being scaled
for frequency & capacity of the cpu.
Consider the following case under a Big.LITTLE architecture:
Assume the runtime is: 50,000,000 ns, and Frequency/capacity
scale-invariance defined as below:
Frequency scale-invariance: 100
Capacity scale-invariance: 50
First by Frequency scale-invariance,
the runtime is scaled to 50,000,000 * 100 >> 10 = 4,882,812
Then by capacity scale-invariance,
it is further scaled to 4,882,812 * 50 >> 10 = 238,418.
So it will scaled to 238,418 ns.
This smaller "accounted runtime" value is what ends up being
subtracted against the fair-server's runtime for the current period.
Thus after 50ms of real time, we've only accounted ~238us against the
fair servers runtime. This 209:1 ratio in this example means that on
the smaller cpu the fair server is allowed to continue running,
blocking RT tasks, for over 10 seconds before it exhausts its supposed
50ms of runtime. And on other hardware configurations it can be even
worse.
For the fair deadline_server, to prevent realtime tasks from being
unexpectedly delayed, we really do want to use fixed time, and not
scaled time for smaller capacity/frequency cpus. So remove the scaling
from the fair server's accounting to fix this.
Fixes: a110a81c52a9 ("sched/deadline: Deferrable dl server")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: John Stultz <jstultz@google.com>
Signed-off-by: kuyo chang <kuyo.chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: John Stultz <jstultz@google.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20250702021440.2594736-1-kuyo.chang@mediatek.com
|
|
Commit <4f1492efb495> ("iommu/vt-d: Revert ATS timing change to fix boot
failure") placed the enabling of ATS in the probe_finalize callback. This
occurs after the default domain attachment, which is when the ATS cache
tag is assigned. Consequently, the device TLB cache tag is missed when the
domain is attached, leading to the device TLB not being invalidated in the
iommu_unmap paths.
Fix this by assigning the CACHE_TAG_DEVTLB cache tag when ATS is enabled.
Fixes: 4f1492efb495 ("iommu/vt-d: Revert ATS timing change to fix boot failure")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250625050135.3129955-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20250628100351.3198955-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The GPIO expander is connected via I2C, thus the can_sleep flag has to
be set to true. This fixes spurious "scheduling while atomic" bugs
in the kernel ringbuffer.
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Milan Krstic <milan.krstic@gmail.com>
Link: https://lore.kernel.org/20250703143039.5809-1-milan.krstic@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use pr_warn() instead of dev_warn() when 'pdev' is NULL to avoid a
potential NULL pointer dereference.
Cc: stable@vger.kernel.org
Fixes: 20869176d7a7 ("ALSA: ad1816a: Use standard print API")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250703200616.304309-2-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The cs40l50_upload_owt() function allocates memory via kmalloc()
without checking for allocation failure, which could lead to a
NULL pointer dereference.
Return -ENOMEM in case allocation fails.
Signed-off-by: Yunshui Jiang <jiangyunshui@kylinos.cn>
Fixes: c38fe1bb5d21 ("Input: cs40l50 - Add support for the CS40L50 haptic driver")
Link: https://lore.kernel.org/r/20250704024010.2353841-1-jiangyunshui@kylinos.cn
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There's one case where ->d_compare() can be called for an in-lookup
dentry; usually that's nothing special from ->d_compare() point of
view, but... proc_sys_compare() is weird.
The thing is, /proc/sys subdirectories can look differently for
different processes. Up to and including having the same name
resolve to different dentries - all of them hashed.
The way it's done is ->d_compare() refusing to admit a match unless
this dentry is supposed to be visible to this caller. The information
needed to discriminate between them is stored in inode; it is set
during proc_sys_lookup() and until it's done d_splice_alias() we really
can't tell who should that dentry be visible for.
Normally there's no negative dentries in /proc/sys; we can run into
a dying dentry in RCU dcache lookup, but those can be safely rejected.
However, ->d_compare() is also called for in-lookup dentries, before
they get positive - or hashed, for that matter. In case of match
we will wait until dentry leaves in-lookup state and repeat ->d_compare()
afterwards. In other words, the right behaviour is to treat the
name match as sufficient for in-lookup dentries; if dentry is not
for us, we'll see that when we recheck once proc_sys_lookup() is
done with it.
While we are at it, fix the misspelled READ_ONCE and WRITE_ONCE there.
Fixes: d9171b934526 ("parallel lookups machinery, part 4 (and last)")
Reported-by: NeilBrown <neilb@brown.name>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We've seen customers having shares mounted in paths like /??/C:/ or
/??/UNC/foo.example.com/share in order to get their native SMB
symlinks successfully followed from different mounts.
After commit 12b466eb52d9 ("cifs: Fix creating and resolving absolute NT-style symlinks"),
the client would then convert absolute paths from "/??/C:/" to "/mnt/c/"
by default. The absolute paths would vary depending on the value of
symlinkroot= mount option.
Fix this by restoring old behavior of not trying to convert absolute
paths by default. Only do this if symlinkroot= was _explicitly_ set.
Before patch:
$ mount.cifs //w22-fs0/test2 /mnt/1 -o vers=3.1.1,username=xxx,password=yyy
$ ls -l /mnt/1/symlink2
lrwxr-xr-x 1 root root 15 Jun 20 14:22 /mnt/1/symlink2 -> /mnt/c/testfile
$ mkdir -p /??/C:; echo foo > //??/C:/testfile
$ cat /mnt/1/symlink2
cat: /mnt/1/symlink2: No such file or directory
After patch:
$ mount.cifs //w22-fs0/test2 /mnt/1 -o vers=3.1.1,username=xxx,password=yyy
$ ls -l /mnt/1/symlink2
lrwxr-xr-x 1 root root 15 Jun 20 14:22 /mnt/1/symlink2 -> '/??/C:/testfile'
$ mkdir -p /??/C:; echo foo > //??/C:/testfile
$ cat /mnt/1/symlink2
foo
Cc: linux-cifs@vger.kernel.org
Reported-by: Pierguido Lambri <plambri@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Stefan Metzmacher <metze@samba.org>
Fixes: 12b466eb52d9 ("cifs: Fix creating and resolving absolute NT-style symlinks")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When the SMB server reboots and the client immediately accesses the mount
point, a race condition can occur that causes operations to fail with
"Host is down" error.
Reproduction steps:
# Mount SMB share
mount -t cifs //192.168.245.109/TEST /mnt/ -o xxxx
ls /mnt
# Reboot server
ssh root@192.168.245.109 reboot
ssh root@192.168.245.109 /path/to/cifs_server_setup.sh
ssh root@192.168.245.109 systemctl stop firewalld
# Immediate access fails
ls /mnt
ls: cannot access '/mnt': Host is down
# But works if there is a delay
The issue is caused by a race condition between negotiate and reconnect.
The 20-second negotiate timeout mechanism can interfere with the normal
recovery process when both are triggered simultaneously.
ls cifsd
---------------------------------------------------
cifs_getattr
cifs_revalidate_dentry
cifs_get_inode_info
cifs_get_fattr
smb2_query_path_info
smb2_compound_op
SMB2_open_init
smb2_reconnect
cifs_negotiate_protocol
smb2_negotiate
cifs_send_recv
smb_send_rqst
wait_for_response
cifs_demultiplex_thread
cifs_read_from_socket
cifs_readv_from_socket
server_unresponsive
cifs_reconnect
__cifs_reconnect
cifs_abort_connection
mid->mid_state = MID_RETRY_NEEDED
cifs_wake_up_task
cifs_sync_mid_result
// case MID_RETRY_NEEDED
rc = -EAGAIN;
// In smb2_negotiate()
rc = -EHOSTDOWN;
The server_unresponsive() timeout triggers cifs_reconnect(), which aborts
ongoing mid requests and causes the ls command to receive -EAGAIN, leading
to -EHOSTDOWN.
Fix this by introducing a dedicated `neg_start` field to
precisely tracks when the negotiate process begins. The timeout check
now uses this accurate timestamp instead of `lstrp`, ensuring that:
1. Timeout is only triggered after negotiate has actually run for 20s
2. The mechanism doesn't interfere with concurrent recovery processes
3. Uninitialized timestamps (value 0) don't trigger false timeouts
Fixes: 7ccc1465465d ("smb: client: fix hang in wait_for_response() for negproto")
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
soc-button-array hardcodes a debounce value by means of gpio_keys
which uses pinctrl-amd as a backend to program debounce for a GPIO.
This hardcoded value doesn't match what the firmware intended to be
programmed in _AEI. The hardcoded debounce leads to problems waking
from suspend. There isn't appetite to conditionalize the behavior in
soc-button-array or gpio-keys so clear it when the system suspends to
avoid problems with being able to resume.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hans de Goede <hansg@kernel.org>
Fixes: 5c4fa2a6da7fb ("Input: soc_button_array - debounce the buttons")
Link: https://lore.kernel.org/linux-input/mkgtrb5gt7miyg6kvqdlbu4nj3elym6ijudobpdi26gp4xxay5@rsa6ytrjvj2q/
Link: https://lore.kernel.org/linux-input/20250625215813.3477840-1-superm1@kernel.org/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/20250627150155.3311574-1-superm1@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Commit 88c02b3f79a6 ("s390/sha3: Support sha3 performance enhancements")
added the field s390_sha_ctx::first_message_part and made it be used by
s390_sha_update() (now s390_sha_update_blocks()). At the time,
s390_sha_update() was used by all the s390 SHA-1, SHA-2, and SHA-3
algorithms. However, only the initialization functions for SHA-3 were
updated, leaving SHA-1 and SHA-2 using first_message_part uninitialized.
This could cause e.g. the function code CPACF_KIMD_SHA_512 |
CPACF_KIMD_NIP to be used instead of just CPACF_KIMD_SHA_512. This
apparently was harmless, as the SHA-1 and SHA-2 function codes ignore
CPACF_KIMD_NIP; it is recognized only by the SHA-3 function codes
(https://lore.kernel.org/r/73477fe9-a1dc-4e38-98a6-eba9921e8afa@linux.ibm.com/).
Therefore, this bug was found only when first_message_part was later
converted to a boolean and UBSAN detected its uninitialized use.
Regardless, let's fix this by just initializing to zero.
Note: in 6.16, we need to patch SHA-1, SHA-384, and SHA-512. In 6.15
and earlier, we'll also need to patch SHA-224 and SHA-256, as they
hadn't yet been librarified (which incidentally fixed this bug).
Fixes: 88c02b3f79a6 ("s390/sha3: Support sha3 performance enhancements")
Cc: stable@vger.kernel.org
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Closes: https://lore.kernel.org/r/12740696-595c-4604-873e-aefe8b405fbf@linux.ibm.com
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250703172316.7914-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
When a user closes an exec queue or interrupts an app with Ctrl-C,
this does not warrant wedging the device in mode 2.
Avoid this by skipping the wedge check for killed exec queues in
the TDR and LR exec queue cleanup worker.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250624174103.2707941-1-matthew.brost@intel.com
(cherry picked from commit 5a2f117a80c207372513ca8964eeb178874f4990)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
This WA is applicable to BMG as well.
Note that this is a GSC WA and we don't load the GSC on BMG, so
extending the WA to BMG won't do anything right now. However, it helps
future-proof the driver so that if we ever turn the GSC on we won't have
to remember to extend this WA.
v2: don't use VERSION_RANGE from 2001 to 2004 (Matt)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250613231128.1261815-2-daniele.ceraolospurio@intel.com
(cherry picked from commit 1a5ce0c5b95b0624ebd44f574b98003a466973be)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But
the memory is allocated for only one pointer. This will lead to
out-of-bounds access later in the code if 'config::ngpios' is > 1. So
fix the code to allocate enough memory to hold 'config::ngpios' of GPIO
descriptors.
While at it, also move the check for memory allocation failure to be below
the allocation to make it more readable.
Cc: stable@vger.kernel.org # 5.0
Fixes: d6cd33ad7102 ("regulator: gpio: Convert to use descriptors")
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250703103549.16558-1-mani@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Return an error from driver probe if the DEVID read from the chip is not
one supported by this driver.
In cs35l56_hw_init() there is a check for valid DEVID, but the invalid
case was returning the value of ret. At this point in the code ret == 0
so the caller would think that cs35l56_hw_init() was successful.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 84851aa055c8 ("ASoC: cs35l56: Move part of cs35l56_init() to shared library")
Link: https://patch.msgid.link/20250703102521.54204-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Revert commit 234f71555019 ("ACPI: battery: negate current when
discharging") breaks not one but several userspace implementations
of battery monitoring: Steam and MangoHud. Perhaps it breaks more,
but those are the two that have been tested.
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Closes: https://lore.kernel.org/linux-acpi/87C1B2AF-D430-4568-B620-14B941A8ABA4@linux.dev/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In vmci_transport_packet_init memset the vmci_transport_packet before
populating the fields to avoid any uninitialised data being left in the
structure.
Cc: Bryan Tan <bryan-bt.tan@broadcom.com>
Cc: Vishnu Dasa <vishnu.dasa@broadcom.com>
Cc: Broadcom internal kernel review list
Cc: Stefano Garzarella <sgarzare@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: virtualization@lists.linux.dev
Cc: netdev@vger.kernel.org
Cc: stable <stable@kernel.org>
Signed-off-by: HarshaVardhana S A <harshavardhana.sa@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250701122254.2397440-1-gregkh@linuxfoundation.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Examples should be complete and should not have a 'status' property,
especially a disabled one because this disables the dt_binding_check of
the example against the schema. Dropping 'status' property shows
missing other properties - phy-mode and phy-handle.
Fixes: 114508a89ddc ("dt-bindings: net: Add support for Sophgo SG2044 dwmac")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://patch.msgid.link/20250701063621.23808-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For NGBE devices, the queue number is limited to be 1 when SRIOV is
enabled. In this case, IRQ vector[0] is used for MISC and vector[1] is
used for queue, based on the previous patches. But for the hardware
design, the IRQ vector[1] must be allocated for use by the VF[6] when
the number of VFs is 7. So the IRQ vector[0] should be shared for PF
MISC and QUEUE interrupts.
+-----------+----------------------+
| Vector | Assigned To |
+-----------+----------------------+
| Vector 0 | PF MISC and QUEUE |
| Vector 1 | VF 6 |
| Vector 2 | VF 5 |
| Vector 3 | VF 4 |
| Vector 4 | VF 3 |
| Vector 5 | VF 2 |
| Vector 6 | VF 1 |
| Vector 7 | VF 0 |
+-----------+----------------------+
Minimize code modifications, only adjust the IRQ vector number for this
case.
Fixes: 877253d2cbf2 ("net: ngbe: add sriov function support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20250701063030.59340-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Due to hardware limitations of NGBE, queue IRQs can only be requested
on vector 0 to 7. When the number of queues is set to the maximum 8,
the PCI IRQ vectors are allocated from 0 to 8. The vector 0 is used by
MISC interrupt, and althrough the vector 8 is used by queue interrupt,
it is unable to receive packets. This will cause some packets to be
dropped when RSS is enabled and they are assigned to queue 8.
So revert the adjustment of the MISC IRQ location, to make it be the
last one in IRQ vectors.
Fixes: 937d46ecc5f9 ("net: wangxun: add ethtool_ops for channel number")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20250701063030.59340-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move the creating of irq_domain for MISC IRQ from .probe to .ndo_open,
and free it in .ndo_stop, to maintain consistency with the queue IRQs.
This it for subsequent adjustments to the IRQ vectors.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250701063030.59340-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The `tx_may_stop()` logic stops TX queues if free descriptors
(`sq->vq->num_free`) fall below the threshold of (`MAX_SKB_FRAGS` + 2).
If the total ring size (`ring_num`) is not strictly greater than this
value, queues can become persistently stopped or stop after minimal
use, severely degrading performance.
A single sk_buff transmission typically requires descriptors for:
- The virtio_net_hdr (1 descriptor)
- The sk_buff's linear data (head) (1 descriptor)
- Paged fragments (up to MAX_SKB_FRAGS descriptors)
This patch enforces that the TX ring size ('ring_num') must be strictly
greater than (MAX_SKB_FRAGS + 2). This ensures that the ring is
always large enough to hold at least one maximally-fragmented packet
plus at least one additional slot.
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250521092236.661410-4-lvivier@redhat.com
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Improve consistency by using everywhere it is needed
'MAX_SKB_FRAGS + 2' rather than '2+MAX_SKB_FRAGS' or
'2 + MAX_SKB_FRAGS'.
No functional change.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250521092236.661410-3-lvivier@redhat.com
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The virtqueue_resize() function was not correctly propagating error codes
from its internal resize helper functions, specifically
virtqueue_resize_packet() and virtqueue_resize_split(). If these helpers
returned an error, but the subsequent call to virtqueue_enable_after_reset()
succeeded, the original error from the resize operation would be masked.
Consequently, virtqueue_resize() could incorrectly report success to its
caller despite an underlying resize failure.
This change restores the original code behavior:
if (vdev->config->enable_vq_after_reset(_vq))
return -EBUSY;
return err;
Fix: commit ad48d53b5b3f ("virtio_ring: separate the logic of reset/enable from virtqueue_resize")
Cc: xuanzhuo@linux.alibaba.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250521092236.661410-2-lvivier@redhat.com
Tested-by: Lei Yang <leiyang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In probe appletb_kbd_probe() a "struct appletb_kbd *kbd" is allocated
via devm_kzalloc() to store touch bar keyboard related data.
Later on if backlight_device_get_by_name() finds a backlight device
with name "appletb_backlight" a timer (kbd->inactivity_timer) is setup
with appletb_inactivity_timer() and the timer is armed to run after
appletb_tb_dim_timeout (60) seconds.
A use-after-free is triggered when failure occurs after the timer is
armed. This ultimately means probe failure occurs and as a result the
"struct appletb_kbd *kbd" which is device managed memory is freed.
After 60 seconds the timer will have expired and __run_timers will
attempt to access the timer (kbd->inactivity_timer) however the kdb
structure has been freed causing a use-after free.
[ 71.636938] ==================================================================
[ 71.637915] BUG: KASAN: slab-use-after-free in __run_timers+0x7ad/0x890
[ 71.637915] Write of size 8 at addr ffff8881178c5958 by task swapper/1/0
[ 71.637915]
[ 71.637915] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.16.0-rc2-00318-g739a6c93cc75-dirty #12 PREEMPT(voluntary)
[ 71.637915] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 71.637915] Call Trace:
[ 71.637915] <IRQ>
[ 71.637915] dump_stack_lvl+0x53/0x70
[ 71.637915] print_report+0xce/0x670
[ 71.637915] ? __run_timers+0x7ad/0x890
[ 71.637915] kasan_report+0xce/0x100
[ 71.637915] ? __run_timers+0x7ad/0x890
[ 71.637915] __run_timers+0x7ad/0x890
[ 71.637915] ? __pfx___run_timers+0x10/0x10
[ 71.637915] ? update_process_times+0xfc/0x190
[ 71.637915] ? __pfx_update_process_times+0x10/0x10
[ 71.637915] ? _raw_spin_lock_irq+0x80/0xe0
[ 71.637915] ? _raw_spin_lock_irq+0x80/0xe0
[ 71.637915] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 71.637915] run_timer_softirq+0x141/0x240
[ 71.637915] ? __pfx_run_timer_softirq+0x10/0x10
[ 71.637915] ? __pfx___hrtimer_run_queues+0x10/0x10
[ 71.637915] ? kvm_clock_get_cycles+0x18/0x30
[ 71.637915] ? ktime_get+0x60/0x140
[ 71.637915] handle_softirqs+0x1b8/0x5c0
[ 71.637915] ? __pfx_handle_softirqs+0x10/0x10
[ 71.637915] irq_exit_rcu+0xaf/0xe0
[ 71.637915] sysvec_apic_timer_interrupt+0x6c/0x80
[ 71.637915] </IRQ>
[ 71.637915]
[ 71.637915] Allocated by task 39:
[ 71.637915] kasan_save_stack+0x33/0x60
[ 71.637915] kasan_save_track+0x14/0x30
[ 71.637915] __kasan_kmalloc+0x8f/0xa0
[ 71.637915] __kmalloc_node_track_caller_noprof+0x195/0x420
[ 71.637915] devm_kmalloc+0x74/0x1e0
[ 71.637915] appletb_kbd_probe+0x37/0x3c0
[ 71.637915] hid_device_probe+0x2d1/0x680
[ 71.637915] really_probe+0x1c3/0x690
[ 71.637915] __driver_probe_device+0x247/0x300
[ 71.637915] driver_probe_device+0x49/0x210
[...]
[ 71.637915]
[ 71.637915] Freed by task 39:
[ 71.637915] kasan_save_stack+0x33/0x60
[ 71.637915] kasan_save_track+0x14/0x30
[ 71.637915] kasan_save_free_info+0x3b/0x60
[ 71.637915] __kasan_slab_free+0x37/0x50
[ 71.637915] kfree+0xcf/0x360
[ 71.637915] devres_release_group+0x1f8/0x3c0
[ 71.637915] hid_device_probe+0x315/0x680
[ 71.637915] really_probe+0x1c3/0x690
[ 71.637915] __driver_probe_device+0x247/0x300
[ 71.637915] driver_probe_device+0x49/0x210
[...]
The root cause of the issue is that the timer is not disarmed
on failure paths leading to it remaining active and accessing
freed memory. To fix this call timer_delete_sync() to deactivate
the timer.
Another small issue is that timer_delete_sync is called
unconditionally in appletb_kbd_remove(), fix this by checking
for a valid kbd->backlight_dev before calling timer_delete_sync.
Fixes: 93a0fc489481 ("HID: hid-appletb-kbd: add support for automatic brightness control while using the touchbar")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When calling buf_to_xdp, the len argument is the frame data's length
without virtio header's length (vi->hdr_len). We check that len with
xsk_pool_get_rx_frame_size() + vi->hdr_len
to ensure the provided len does not larger than the allocated chunk
size. The additional vi->hdr_len is because in virtnet_add_recvbuf_xsk,
we use part of XDP_PACKET_HEADROOM for virtio header and ask the vhost
to start placing data from
hard_start + XDP_PACKET_HEADROOM - vi->hdr_len
not
hard_start + XDP_PACKET_HEADROOM
But the first buffer has virtio_header, so the maximum frame's length in
the first buffer can only be
xsk_pool_get_rx_frame_size()
not
xsk_pool_get_rx_frame_size() + vi->hdr_len
like in the current check.
This commit adds an additional argument to buf_to_xdp differentiate
between the first buffer and other ones to correctly calculate the maximum
frame's length.
Cc: stable@vger.kernel.org
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Fixes: a4e7ba702701 ("virtio_net: xsk: rx: support recv small mode")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250630151315.86722-2-minhquangbui99@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace the current repeated code to check received length in mergeable
mode with the new check_mergeable_len helper.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250630144212.48471-4-minhquangbui99@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The truesize is guaranteed not to exceed PAGE_SIZE in
get_mergeable_buf_len(). It is saved in mergeable context, which is not
changeable by the host side, so the check in receive path is quite
redundant.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250630144212.48471-3-minhquangbui99@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In xdp_linearize_page, when reading the following buffers from the ring,
we forget to check the received length with the true allocate size. This
can lead to an out-of-bound read. This commit adds that missing check.
Cc: <stable@vger.kernel.org>
Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250630144212.48471-2-minhquangbui99@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jann reports that uprobes can be used destructively when used in the
middle of an instruction. The kernel only verifies there is a valid
instruction at the requested offset, but due to variable instruction
length cannot determine if this is an instruction as seen by the
intended execution stream.
Additionally, Mark Rutland notes that on architectures that mix data
in the text segment (like arm64), a similar things can be done if the
data word is 'mistaken' for an instruction.
As such, require CAP_SYS_ADMIN for uprobes.
Fixes: c9e0924e5c2b ("perf/core: open access to probes for CAP_PERFMON privileged process")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/CAG48ez1n4520sq0XrWYDHKiKxE_+WCfAK+qt9qkY4ZiBGmL-5g@mail.gmail.com
|
|
The name of BTN_GEAR_DOWN was WheelBtn and BTN_WHEEL was missing. Further,
BTN_GEAR_UP had a space in its name and no Btn, which is against convention.
This makes the names BtnGearDown, BtnGearUp, and BtnWheel, fixing the errors
and matching convention.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The ELECOM M-HT1DRBK trackball has an additional device ID (056E:019B)
not yet recognized by the driver, despite using the same report
descriptor as earlier variants. This patch adds the new ID and applies
the same fixups, enabling all 8 buttons to function properly.
Signed-off-by: Leonard Dizon <leonard@snekbyte.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
In appletb_kbd_probe an input handler is initialised and then registered
with input core through input_register_handler(). When this happens input
core will add the input handler (specifically its node) to the global
input_handler_list. The input_handler_list is central to the functionality
of input core and is traversed in various places in input core. An example
of this is when a new input device is plugged in and gets registered with
input core.
The input_handler in probe is allocated as device managed memory. If a
probe failure occurs after input_register_handler() the input_handler
memory is freed, yet it will remain in the input_handler_list. This
effectively means the input_handler_list contains a dangling pointer
to data belonging to a freed input handler.
This causes an issue when any other input device is plugged in - in my
case I had an old PixArt HP USB optical mouse and I decided to
plug it in after a failure occurred after input_register_handler().
This lead to the registration of this input device via
input_register_device which involves traversing over every handler
in the corrupted input_handler_list and calling input_attach_handler(),
giving each handler a chance to bind to newly registered device.
The core of this bug is a UAF which causes memory corruption of
input_handler_list and to fix it we must ensure the input handler is
unregistered from input core, this is done through
input_unregister_handler().
[ 63.191597] ==================================================================
[ 63.192094] BUG: KASAN: slab-use-after-free in input_attach_handler.isra.0+0x1a9/0x1e0
[ 63.192094] Read of size 8 at addr ffff888105ea7c80 by task kworker/0:2/54
[ 63.192094]
[ 63.192094] CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.16.0-rc2-00321-g2aa6621d
[ 63.192094] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.164
[ 63.192094] Workqueue: usb_hub_wq hub_event
[ 63.192094] Call Trace:
[ 63.192094] <TASK>
[ 63.192094] dump_stack_lvl+0x53/0x70
[ 63.192094] print_report+0xce/0x670
[ 63.192094] kasan_report+0xce/0x100
[ 63.192094] input_attach_handler.isra.0+0x1a9/0x1e0
[ 63.192094] input_register_device+0x76c/0xd00
[ 63.192094] hidinput_connect+0x686d/0xad60
[ 63.192094] hid_connect+0xf20/0x1b10
[ 63.192094] hid_hw_start+0x83/0x100
[ 63.192094] hid_device_probe+0x2d1/0x680
[ 63.192094] really_probe+0x1c3/0x690
[ 63.192094] __driver_probe_device+0x247/0x300
[ 63.192094] driver_probe_device+0x49/0x210
[ 63.192094] __device_attach_driver+0x160/0x320
[ 63.192094] bus_for_each_drv+0x10f/0x190
[ 63.192094] __device_attach+0x18e/0x370
[ 63.192094] bus_probe_device+0x123/0x170
[ 63.192094] device_add+0xd4d/0x1460
[ 63.192094] hid_add_device+0x30b/0x910
[ 63.192094] usbhid_probe+0x920/0xe00
[ 63.192094] usb_probe_interface+0x363/0x9a0
[ 63.192094] really_probe+0x1c3/0x690
[ 63.192094] __driver_probe_device+0x247/0x300
[ 63.192094] driver_probe_device+0x49/0x210
[ 63.192094] __device_attach_driver+0x160/0x320
[ 63.192094] bus_for_each_drv+0x10f/0x190
[ 63.192094] __device_attach+0x18e/0x370
[ 63.192094] bus_probe_device+0x123/0x170
[ 63.192094] device_add+0xd4d/0x1460
[ 63.192094] usb_set_configuration+0xd14/0x1880
[ 63.192094] usb_generic_driver_probe+0x78/0xb0
[ 63.192094] usb_probe_device+0xaa/0x2e0
[ 63.192094] really_probe+0x1c3/0x690
[ 63.192094] __driver_probe_device+0x247/0x300
[ 63.192094] driver_probe_device+0x49/0x210
[ 63.192094] __device_attach_driver+0x160/0x320
[ 63.192094] bus_for_each_drv+0x10f/0x190
[ 63.192094] __device_attach+0x18e/0x370
[ 63.192094] bus_probe_device+0x123/0x170
[ 63.192094] device_add+0xd4d/0x1460
[ 63.192094] usb_new_device+0x7b4/0x1000
[ 63.192094] hub_event+0x234d/0x3fa0
[ 63.192094] process_one_work+0x5bf/0xfe0
[ 63.192094] worker_thread+0x777/0x13a0
[ 63.192094] </TASK>
[ 63.192094]
[ 63.192094] Allocated by task 54:
[ 63.192094] kasan_save_stack+0x33/0x60
[ 63.192094] kasan_save_track+0x14/0x30
[ 63.192094] __kasan_kmalloc+0x8f/0xa0
[ 63.192094] __kmalloc_node_track_caller_noprof+0x195/0x420
[ 63.192094] devm_kmalloc+0x74/0x1e0
[ 63.192094] appletb_kbd_probe+0x39/0x440
[ 63.192094] hid_device_probe+0x2d1/0x680
[ 63.192094] really_probe+0x1c3/0x690
[ 63.192094] __driver_probe_device+0x247/0x300
[ 63.192094] driver_probe_device+0x49/0x210
[ 63.192094] __device_attach_driver+0x160/0x320
[...]
[ 63.192094]
[ 63.192094] Freed by task 54:
[ 63.192094] kasan_save_stack+0x33/0x60
[ 63.192094] kasan_save_track+0x14/0x30
[ 63.192094] kasan_save_free_info+0x3b/0x60
[ 63.192094] __kasan_slab_free+0x37/0x50
[ 63.192094] kfree+0xcf/0x360
[ 63.192094] devres_release_group+0x1f8/0x3c0
[ 63.192094] hid_device_probe+0x315/0x680
[ 63.192094] really_probe+0x1c3/0x690
[ 63.192094] __driver_probe_device+0x247/0x300
[ 63.192094] driver_probe_device+0x49/0x210
[ 63.192094] __device_attach_driver+0x160/0x320
[...]
Fixes: 7d62ba8deacf ("HID: hid-appletb-kbd: add support for fn toggle between media and function mode")
Cc: stable@vger.kernel.org
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Currently, an interrupt can be triggered during a GPU reset, which can
lead to GPU hangs and NULL pointer dereference in an interrupt context
as shown in the following trace:
[ 314.035040] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0
[ 314.043822] Mem abort info:
[ 314.046606] ESR = 0x0000000096000005
[ 314.050347] EC = 0x25: DABT (current EL), IL = 32 bits
[ 314.055651] SET = 0, FnV = 0
[ 314.058695] EA = 0, S1PTW = 0
[ 314.061826] FSC = 0x05: level 1 translation fault
[ 314.066694] Data abort info:
[ 314.069564] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 314.075039] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 314.080080] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 314.085382] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000102728000
[ 314.091814] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 314.100511] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 314.106770] Modules linked in: v3d i2c_brcmstb vc4 snd_soc_hdmi_codec gpu_sched drm_shmem_helper drm_display_helper cec drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight
[ 314.129654] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1
[ 314.139388] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
[ 314.145211] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 314.152165] pc : v3d_irq+0xec/0x2e0 [v3d]
[ 314.156187] lr : v3d_irq+0xe0/0x2e0 [v3d]
[ 314.160198] sp : ffffffc080003ea0
[ 314.163502] x29: ffffffc080003ea0 x28: ffffffec1f184980 x27: 021202b000000000
[ 314.170633] x26: ffffffec1f17f630 x25: ffffff8101372000 x24: ffffffec1f17d9f0
[ 314.177764] x23: 000000000000002a x22: 000000000000002a x21: ffffff8103252000
[ 314.184895] x20: 0000000000000001 x19: 00000000deadbeef x18: 0000000000000000
[ 314.192026] x17: ffffff94e51d2000 x16: ffffffec1dac3cb0 x15: c306000000000000
[ 314.199156] x14: 0000000000000000 x13: b2fc982e03cc5168 x12: 0000000000000001
[ 314.206286] x11: ffffff8103f8bcc0 x10: ffffffec1f196868 x9 : ffffffec1dac3874
[ 314.213416] x8 : 0000000000000000 x7 : 0000000000042a3a x6 : ffffff810017a180
[ 314.220547] x5 : ffffffec1ebad400 x4 : ffffffec1ebad320 x3 : 00000000000bebeb
[ 314.227677] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
[ 314.234807] Call trace:
[ 314.237243] v3d_irq+0xec/0x2e0 [v3d]
[ 314.240906] __handle_irq_event_percpu+0x58/0x218
[ 314.245609] handle_irq_event+0x54/0xb8
[ 314.249439] handle_fasteoi_irq+0xac/0x240
[ 314.253527] handle_irq_desc+0x48/0x68
[ 314.257269] generic_handle_domain_irq+0x24/0x38
[ 314.261879] gic_handle_irq+0x48/0xd8
[ 314.265533] call_on_irq_stack+0x24/0x58
[ 314.269448] do_interrupt_handler+0x88/0x98
[ 314.273624] el1_interrupt+0x34/0x68
[ 314.277193] el1h_64_irq_handler+0x18/0x28
[ 314.281281] el1h_64_irq+0x64/0x68
[ 314.284673] default_idle_call+0x3c/0x168
[ 314.288675] do_idle+0x1fc/0x230
[ 314.291895] cpu_startup_entry+0x3c/0x50
[ 314.295810] rest_init+0xe4/0xf0
[ 314.299030] start_kernel+0x5e8/0x790
[ 314.302684] __primary_switched+0x80/0x90
[ 314.306691] Code: 940029eb 360ffc13 f9442ea0 52800001 (f9406017)
[ 314.312775] ---[ end trace 0000000000000000 ]---
[ 314.317384] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 314.324249] SMP: stopping secondary CPUs
[ 314.328167] Kernel Offset: 0x2b9da00000 from 0xffffffc080000000
[ 314.334076] PHYS_OFFSET: 0x0
[ 314.336946] CPU features: 0x08,00002013,c0200000,0200421b
[ 314.342337] Memory Limit: none
[ 314.345382] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
Before resetting the GPU, it's necessary to disable all interrupts and
deal with any interrupt handler still in-flight. Otherwise, the GPU might
reset with jobs still running, or yet, an interrupt could be handled
during the reset.
Cc: stable@vger.kernel.org
Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://lore.kernel.org/r/20250628224243.47599-1-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
|
|
udp_v4_early_demux now returns drop reasons as it either returns 0 or
ip_mc_validate_source, which returns itself a drop reason. However its
use was not converted in ip_rcv_finish_core and the drop reason is
ignored, leading to potentially skipping increasing LINUX_MIB_IPRPFILTER
if the drop reason is SKB_DROP_REASON_IP_RPFILTER.
This is a fix and we're not converting udp_v4_early_demux to explicitly
return a drop reason to ease backports; this can be done as a follow-up.
Fixes: d46f827016d8 ("net: ip: make ip_mc_validate_source() return drop reason")
Cc: Menglong Dong <menglong8.dong@gmail.com>
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250701074935.144134-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When setting "ethtool -L eth0 combined 1", the number of RX/TX queue is
changed to be 1. RSS is disabled at this moment, and the indices of FDIR
have not be changed in wx_set_rss_queues(). So the combined count still
shows the previous value. This issue was introduced when supporting
FDIR. Fix it for those devices that support FDIR.
Fixes: 34744a7749b3 ("net: txgbe: add FDIR info to ethtool ops")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/A5C8FE56D6C04608+20250701070625.73680-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The link status is latched low so that momentary link drops
can be detected. Always double-reading the status defeats this
design feature. Only double read if link was already down
This prevents unnecessary duplicate readings of the link status.
Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701065016.4140707-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Certain classful qdiscs may invoke their classes' dequeue handler on an
enqueue operation. This may unexpectedly empty the child qdisc and thus
make an in-flight class passive via qlen_notify(). Most qdiscs do not
expect such behaviour at this point in time and may re-activate the
class eventually anyways which will lead to a use-after-free.
The referenced fix commit attempted to fix this behavior for the HFSC
case by moving the backlog accounting around, though this turned out to
be incomplete since the parent's parent may run into the issue too.
The following reproducer demonstrates this use-after-free:
tc qdisc add dev lo root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo parent 1: classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: hfsc def 1
tc class add dev lo parent 2: classid 2:1 hfsc rt m1 8 d 1 m2 0
tc qdisc add dev lo parent 2:1 handle 3: netem
tc qdisc add dev lo parent 3:1 handle 4: blackhole
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
tc class delete dev lo classid 1:1
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
Since backlog accounting issues leading to a use-after-frees on stale
class pointers is a recurring pattern at this point, this patch takes
a different approach. Instead of trying to fix the accounting, the patch
ensures that qdisc_tree_reduce_backlog always calls qlen_notify when
the child qdisc is empty. This solves the problem because deletion of
qdiscs always involves a call to qdisc_reset() and / or
qdisc_purge_queue() which ultimately resets its qlen to 0 thus causing
the following qdisc_tree_reduce_backlog() to report to the parent. Note
that this may call qlen_notify on passive classes multiple times. This
is not a problem after the recent patch series that made all the
classful qdiscs qlen_notify() handlers idempotent.
Fixes: 3f981138109f ("sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()")
Signed-off-by: Lion Ackermann <nnamrec@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix misspelling reported by codespell.
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Link: https://patch.msgid.link/20250523220238.455718-1-sumanth.gavini@yahoo.com
[ rjw: Subject rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Lists should have fixed amount if items, so add missing constraint to
the 'reg' property (only one address space entry).
Fixes: c5eda0333076 ("dt-bindings: i2c: Add Realtek RTL I2C Controller")
Cc: <stable@vger.kernel.org> # v6.13+
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250702061530.6940-2-krzysztof.kozlowski@linaro.org
|
Sebastian Andrzej Siewior
Petr Pavlu
Thomas Weißschuh
Edson Juliano Drosdeck
Baojun Xu
Uwe Kleine-König
Linus Torvalds
Terry Tritton
kuyo chang
Lu Baolu
Milan Krstic
Thorsten Blum
Yunshui Jiang
Al Viro
Paulo Alcantara
Wang Zhaolong
Mario Limonciello
Eric Biggers
Matthew Brost
Daniele Ceraolo Spurio
Manivannan Sadhasivam
Richard Fitzgerald
Rafael J. Wysocki
HarshaVardhana S A
Krzysztof Kozlowski
Jiawen Wu
Laurent Vivier
Qasim Ijaz
Bui Quang Minh
Peter Zijlstra
Vicki Pfau
Leonard Dizon
Maíra Canal
Antoine Tenart
Raju Rangoju
Lion Ackermann
Sumanth Gavini