aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-sqlite.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2023-10-05io-wq: fully initialize wqe before calling cpuhp_state_add_instance_nocalls()Jeff Moyer1-6/+4
I received a bug report with the following signature: [ 1759.937637] BUG: unable to handle page fault for address: ffffffffffffffe8 [ 1759.944564] #PF: supervisor read access in kernel mode [ 1759.949732] #PF: error_code(0x0000) - not-present page [ 1759.954901] PGD 7ab615067 P4D 7ab615067 PUD 7ab617067 PMD 0 [ 1759.960596] Oops: 0000 1 PREEMPT SMP PTI [ 1759.964804] CPU: 15 PID: 109 Comm: cpuhp/15 Kdump: loaded Tainted: G X ------- — 5.14.0-362.3.1.el9_3.x86_64 #1 [ 1759.976609] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/20/2018 [ 1759.985181] RIP: 0010:io_wq_for_each_worker.isra.0+0x24/0xa0 [ 1759.990877] Code: 90 90 90 90 90 90 0f 1f 44 00 00 41 56 41 55 41 54 55 48 8d 6f 78 53 48 8b 47 78 48 39 c5 74 4f 49 89 f5 49 89 d4 48 8d 58 e8 <8b> 13 85 d2 74 32 8d 4a 01 89 d0 f0 0f b1 0b 75 5c 09 ca 78 3d 48 [ 1760.009758] RSP: 0000:ffffb6f403603e20 EFLAGS: 00010286 [ 1760.015013] RAX: 0000000000000000 RBX: ffffffffffffffe8 RCX: 0000000000000000 [ 1760.022188] RDX: ffffb6f403603e50 RSI: ffffffffb11e95b0 RDI: ffff9f73b09e9400 [ 1760.029362] RBP: ffff9f73b09e9478 R08: 000000000000000f R09: 0000000000000000 [ 1760.036536] R10: ffffffffffffff00 R11: ffffb6f403603d80 R12: ffffb6f403603e50 [ 1760.043712] R13: ffffffffb11e95b0 R14: ffffffffb28531e8 R15: ffff9f7a6fbdf548 [ 1760.050887] FS: 0000000000000000(0000) GS:ffff9f7a6fbc0000(0000) knlGS:0000000000000000 [ 1760.059025] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1760.064801] CR2: ffffffffffffffe8 CR3: 00000007ab610002 CR4: 00000000007706e0 [ 1760.071976] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1760.079150] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1760.086325] PKRU: 55555554 [ 1760.089044] Call Trace: [ 1760.091501] <TASK> [ 1760.093612] ? show_trace_log_lvl+0x1c4/0x2df [ 1760.097995] ? show_trace_log_lvl+0x1c4/0x2df [ 1760.102377] ? __io_wq_cpu_online+0x54/0xb0 [ 1760.106584] ? __die_body.cold+0x8/0xd [ 1760.110356] ? page_fault_oops+0x134/0x170 [ 1760.114479] ? kernelmode_fixup_or_oops+0x84/0x110 [ 1760.119298] ? exc_page_fault+0xa8/0x150 [ 1760.123247] ? asm_exc_page_fault+0x22/0x30 [ 1760.127458] ? __pfx_io_wq_worker_affinity+0x10/0x10 [ 1760.132453] ? __pfx_io_wq_worker_affinity+0x10/0x10 [ 1760.137446] ? io_wq_for_each_worker.isra.0+0x24/0xa0 [ 1760.142527] __io_wq_cpu_online+0x54/0xb0 [ 1760.146558] cpuhp_invoke_callback+0x109/0x460 [ 1760.151029] ? __pfx_io_wq_cpu_offline+0x10/0x10 [ 1760.155673] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 1760.160320] cpuhp_thread_fun+0x8d/0x140 [ 1760.164266] smpboot_thread_fn+0xd3/0x1a0 [ 1760.168297] kthread+0xdd/0x100 [ 1760.171457] ? __pfx_kthread+0x10/0x10 [ 1760.175225] ret_from_fork+0x29/0x50 [ 1760.178826] </TASK> [ 1760.181022] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill sunrpc vfat fat dm_multipath intel_rapl_msr intel_rapl_common isst_if_common ipmi_ssif nfit libnvdimm mgag200 i2c_algo_bit ioatdma drm_shmem_helper drm_kms_helper acpi_ipmi syscopyarea x86_pkg_temp_thermal sysfillrect ipmi_si intel_powerclamp sysimgblt ipmi_devintf coretemp acpi_power_meter ipmi_msghandler rapl pcspkr dca intel_pch_thermal intel_cstate ses lpc_ich intel_uncore enclosure hpilo mei_me mei acpi_tad fuse drm xfs sd_mod sg bnx2x nvme nvme_core crct10dif_pclmul crc32_pclmul nvme_common ghash_clmulni_intel smartpqi tg3 t10_pi mdio uas libcrc32c crc32c_intel scsi_transport_sas usb_storage hpwdt wmi dm_mirror dm_region_hash dm_log dm_mod [ 1760.248623] CR2: ffffffffffffffe8 A cpu hotplug callback was issued before wq->all_list was initialized. This results in a null pointer dereference. The fix is to fully setup the io_wq before calling cpuhp_state_add_instance_nocalls(). Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Link: https://lore.kernel.org/r/x49y1ghnecs.fsf@segfault.boston.devel.redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-10-05platform/x86: touchscreen_dmi: Add info for the Positivo C4128BRenan Guilherme Lebre Ramos1-0/+23
Add information for the Positivo C4128B, a notebook/tablet convertible. Link: https://github.com/onitake/gsl-firmware/pull/217 Signed-off-by: Renan Guilherme Lebre Ramos <japareaggae@gmail.com> Link: https://lore.kernel.org/r/20231004235900.426240-1-japareaggae@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-10-05MAINTAINERS: update Matthieu's email addressMatthieu Baerts2-1/+2
Use my kernel.org account instead. The other one will bounce by the end of the year. Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-3-28de4ac663ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05mptcp: userspace pm allow creating id 0 subflowGeliang Tang1-6/+0
This patch drops id 0 limitation in mptcp_nl_cmd_sf_create() to allow creating additional subflows with the local addr ID 0. There is no reason not to allow additional subflows from this local address: we should be able to create new subflows from the initial endpoint. This limitation was breaking fullmesh support from userspace. Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/391 Cc: stable@vger.kernel.org Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-2-28de4ac663ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05mptcp: fix delegated action racesPaolo Abeni3-39/+34
The delegated action infrastructure is prone to the following race: different CPUs can try to schedule different delegated actions on the same subflow at the same time. Each of them will check different bits via mptcp_subflow_delegate(), and will try to schedule the action on the related per-cpu napi instance. Depending on the timing, both can observe an empty delegated list node, causing the same entry to be added simultaneously on two different lists. The root cause is that the delegated actions infra does not provide a single synchronization point. Address the issue reserving an additional bit to mark the subflow as scheduled for delegation. Acquiring such bit guarantee the caller to own the delegated list node, and being able to safely schedule the subflow. Clear such bit only when the subflow scheduling is completed, ensuring proper barrier in place. Additionally swap the meaning of the delegated_action bitmask, to allow the usage of the existing helper to set multiple bit at once. Fixes: bcd97734318d ("mptcp: use delegate action to schedule 3rd ack retrans") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-1-28de4ac663ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05net: stmmac: remove unneeded stmmac_poll_controllerRemi Pommarel1-30/+0
Using netconsole netpoll_poll_dev could be called from interrupt context, thus using disable_irq() would cause the following kernel warning with CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/irq/manage.c:137 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 10, name: ksoftirqd/0 CPU: 0 PID: 10 Comm: ksoftirqd/0 Tainted: G W 5.15.42-00075-g816b502b2298-dirty #117 Hardware name: aml (r1) (DT) Call trace: dump_backtrace+0x0/0x270 show_stack+0x14/0x20 dump_stack_lvl+0x8c/0xac dump_stack+0x18/0x30 ___might_sleep+0x150/0x194 __might_sleep+0x64/0xbc synchronize_irq+0x8c/0x150 disable_irq+0x2c/0x40 stmmac_poll_controller+0x140/0x1a0 netpoll_poll_dev+0x6c/0x220 netpoll_send_skb+0x308/0x390 netpoll_send_udp+0x418/0x760 write_msg+0x118/0x140 [netconsole] console_unlock+0x404/0x500 vprintk_emit+0x118/0x250 dev_vprintk_emit+0x19c/0x1cc dev_printk_emit+0x90/0xa8 __dev_printk+0x78/0x9c _dev_warn+0xa4/0xbc ath10k_warn+0xe8/0xf0 [ath10k_core] ath10k_htt_txrx_compl_task+0x790/0x7fc [ath10k_core] ath10k_pci_napi_poll+0x98/0x1f4 [ath10k_pci] __napi_poll+0x58/0x1f4 net_rx_action+0x504/0x590 _stext+0x1b8/0x418 run_ksoftirqd+0x74/0xa4 smpboot_thread_fn+0x210/0x3c0 kthread+0x1fc/0x210 ret_from_fork+0x10/0x20 Since [0] .ndo_poll_controller is only needed if driver doesn't or partially use NAPI. Because stmmac does so, stmmac_poll_controller can be removed fixing the above warning. [0] commit ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional") Cc: <stable@vger.kernel.org> # 5.15.x Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/1c156a6d8c9170bd6a17825f2277115525b4d50f.1696429960.git.repk@triplefau.lt Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05net: lan743x: also select PHYLIBRandy Dunlap1-0/+1
Since FIXED_PHY depends on PHYLIB, PHYLIB needs to be set to avoid a kconfig warning: WARNING: unmet direct dependencies detected for FIXED_PHY Depends on [n]: NETDEVICES [=y] && PHYLIB [=n] Selected by [y]: - LAN743X [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && PCI [=y] && PTP_1588_CLOCK_OPTIONAL [=y] Fixes: 73c4d1b307ae ("net: lan743x: select FIXED_PHY") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Closes: lore.kernel.org/r/202309261802.JPbRHwti-lkp@intel.com Cc: Bryan Whitehead <bryan.whitehead@microchip.com> Cc: UNGLinuxDriver@microchip.com Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Link: https://lore.kernel.org/r/20231002193544.14529-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05net: ethernet: mediatek: disable irq before schedule napiChristian Marangi1-2/+2
While searching for possible refactor of napi_schedule_prep and __napi_schedule it was notice that the mtk eth driver disable the interrupt for rx and tx AFTER napi is scheduled. While this is a very hard to repro case it might happen to have situation where the interrupt is disabled and never enabled again as the napi completes and the interrupt is enabled before. This is caused by the fact that a napi driven by interrupt expect a logic with: 1. interrupt received. napi prepared -> interrupt disabled -> napi scheduled 2. napi triggered. ring cleared -> interrupt enabled -> wait for new interrupt To prevent this case, disable the interrupt BEFORE the napi is scheduled. Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet") Cc: stable@vger.kernel.org Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20231002140805.568-1-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05HID: Add quirk to ignore the touchscreen battery on HP ENVY 15-eu0556ngFabian Vogt2-0/+3
Like various other devices using similar hardware, this model reports a perpetually empty battery (0-1%). Join the others and apply HID_BATTERY_QUIRK_IGNORE. Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bitSrinivas Pandruvada1-0/+8
The EHL (Elkhart Lake) based platforms provide a OOB (Out of band) service, which allows to wakup device when the system is in S5 (Soft-Off state). This OOB service can be enabled/disabled from BIOS settings. When enabled, the ISH device gets PME wake capability. To enable PME wakeup, driver also needs to enable ACPI GPE bit. On resume, BIOS will clear the wakeup bit. So driver need to re-enable it in resume function to keep the next wakeup capability. But this BIOS clearing of wakeup bit doesn't decrement internal OS GPE reference count, so this reenabling on every resume will cause reference count to overflow. So first disable and reenable ACPI GPE bit using acpi_disable_gpe(). Fixes: 2e23a70edabe ("HID: intel-ish-hid: ipc: finish power flow for EHL OOB") Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Closes: https://lore.kernel.org/lkml/CAAd53p4=oLYiH2YbVSmrPNj1zpMcfp=Wxbasb5vhMXOWCArLCg@mail.gmail.com/T/ Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: sony: remove duplicate NULL check before calling usb_free_urb()Jiri Kosina1-2/+1
usb_free_urb() does the NULL check itself, so there is no need to duplicate it prior to calling. Reported-by: kernel test robot <lkp@intel.com> Fixes: e1cd4004cde7c9 ("HID: sony: Fix a potential memory leak in sony_probe()") Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: nintendo: reinitialize USB Pro Controller after resuming from suspendMartino Fontana1-72/+103
When suspending the computer, a Switch Pro Controller connected via USB will lose its internal status. However, because the USB connection was technically never lost, when resuming the computer, the driver will attempt to communicate with the controller as if nothing happened (and fail). Because of this, the user was forced to manually disconnect the controller (or to press the sync button on the controller to power it off), so that it can be re-initialized. With this patch, the controller will be automatically re-initialized after resuming from suspend. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216233 Signed-off-by: Martino Fontana <tinozzo123@gmail.com> Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: nvidia-shield: Fix some missing function calls() in the probe error handling pathChristophe JAILLET1-2/+4
The commit in Fixes updated the error handling path of thunderstrike_create() and the remove function but not the error handling path of shield_probe(), should an error occur after a successful thunderstrike_create() call. Add the missing calls. Fixes: 3ab196f88237 ("HID: nvidia-shield: Add battery support for Thunderstrike") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: nvidia-shield: Fix a missing led_classdev_unregister() in the probe error handling pathChristophe JAILLET1-1/+2
The commit in Fixes updated the error handling path of thunderstrike_create() and the remove function but not the error handling path of shield_probe(), should an error occur after a successful thunderstrike_create() call. Add the missing call. Make sure it is safe to call in the probe error handling path by preventing the led_classdev from attempting to set the LED brightness to the off state on unregister. Fixes: f88af60e74a5 ("HID: nvidia-shield: Support LED functionality for Thunderstrike") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05HID: multitouch: Add required quirk for Synaptics 0xcd7e deviceRahul Rameshbabu1-0/+4
Register the Synaptics device as a special multitouch device with certain quirks that may improve usability of the touchpad device. Reported-by: Rain <rain@sunshowers.io> Closes: https://lore.kernel.org/linux-input/2bbb8e1d-1793-4df1-810f-cb0137341ff4@app.fastmail.com/ Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-05net: mana: Fix oversized sge0 for GSO packetsHaiyang Zhang2-58/+138
Handle the case when GSO SKB linear length is too large. MANA NIC requires GSO packets to put only the header part to SGE0, otherwise the TX queue may stop at the HW level. So, use 2 SGEs for the skb linear part which contains more than the packet header. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05net: mana: Fix the tso_bytes calculationHaiyang Zhang1-2/+0
sizeof(struct hop_jumbo_hdr) is not part of tso_bytes, so remove the subtraction from header size. Cc: stable@vger.kernel.org Fixes: bd7fc6e1957c ("net: mana: Add new MANA VF performance counters for easier troubleshooting") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05net: mana: Fix TX CQE error handlingHaiyang Zhang1-7/+11
For an unknown TX CQE error type (probably from a newer hardware), still free the SKB, update the queue tail, etc., otherwise the accounting will be wrong. Also, TX errors can be triggered by injecting corrupted packets, so replace the WARN_ONCE to ratelimited error logging. Cc: stable@vger.kernel.org Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-04drm/amd/display: apply edge-case DISPCLK WDIVIDER changes to master OTG pipes onlySamson Tam2-4/+4
[Why] The edge-case DISPCLK WDIVIDER changes call stream_enc functions. But with MPC pipes, downstream pipes have null stream_enc and will cause crash. [How] Only call stream_enc functions for pipes that are OTG master. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amd: Fix detection of _PR3 on the PCIe root portMario Limonciello1-1/+1
On some systems with Navi3x dGPU will attempt to use BACO for runtime PM but fails to resume properly. This is because on these systems the root port goes into D3cold which is incompatible with BACO. This happens because in this case dGPU is connected to a bridge between root port which causes BOCO detection logic to fail. Fix the intent of the logic by looking at root port, not the immediate upstream bridge for _PR3. Cc: stable@vger.kernel.org Suggested-by: Jun Ma <Jun.Ma2@amd.com> Tested-by: David Perry <David.Perry@amd.com> Fixes: b10c1c5b3a4e ("drm/amdgpu: add check for ACPI power resources") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amd: Fix logic error in sienna_cichlid_update_pcie_parameters()Mario Limonciello1-18/+23
While aligning SMU11 with SMU13 implementation an assumption was made that `dpm_context->dpm_tables.pcie_table` was populated in dpm table initialization like in SMU13 but it isn't. So restore some of the original logic and instead just check for amdgpu_device_pcie_dynamic_switching_supported() to decide whether to hardcode values; erring on the side of performance. Cc: stable@vger.kernel.org # 6.1+ Reported-and-tested-by: Umio Yasuno <coelacanth_dream@protonmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1447#note_2101382 Fixes: e701156ccc6c ("drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amdgpu: Fix a memory leakLuben Tuikov1-0/+1
Fix a memory leak in amdgpu_fru_get_product_info(). Cc: Alex Deucher <Alexander.Deucher@amd.com> Reported-by: Yang Wang <kevinyang.wang@amd.com> Fixes: 0dbf2c562625 ("drm/amdgpu: Interpret IPMI data for product information (v2)") Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amd/pm: add unique_id for gc 11.0.3Kenneth Feng1-0/+1
add unique_id for gc 11.0.3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04netlink: annotate data-races around sk->sk_errEric Dumazet1-4/+4
syzbot caught another data-race in netlink when setting sk->sk_err. Annotate all of them for good measure. BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg write to 0xffff8881613bb220 of 4 bytes by task 28147 on cpu 0: netlink_recvmsg+0x448/0x780 net/netlink/af_netlink.c:1994 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] __sys_recvfrom+0x1f4/0x2e0 net/socket.c:2229 __do_sys_recvfrom net/socket.c:2247 [inline] __se_sys_recvfrom net/socket.c:2243 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2243 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffff8881613bb220 of 4 bytes by task 28146 on cpu 1: netlink_recvmsg+0x448/0x780 net/netlink/af_netlink.c:1994 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] __sys_recvfrom+0x1f4/0x2e0 net/socket.c:2229 __do_sys_recvfrom net/socket.c:2247 [inline] __se_sys_recvfrom net/socket.c:2243 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2243 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00000000 -> 0x00000016 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 28146 Comm: syz-executor.0 Not tainted 6.6.0-rc3-syzkaller-00055-g9ed22ae6be81 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231003183455.3410550-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04sctp: update hb timer immediately after users change hb_intervalXin Long1-0/+1
Currently, when hb_interval is changed by users, it won't take effect until the next expiry of hb timer. As the default value is 30s, users have to wait up to 30s to wait its hb_interval update to work. This becomes pretty bad in containers where a much smaller value is usually set on hb_interval. This patch improves it by resetting the hb timer immediately once the value of hb_interval is updated by users. Note that we don't address the already existing 'problem' when sending a heartbeat 'on demand' if one hb has just been sent(from the timer) mentioned in: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg590224.html Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/75465785f8ee5df2fb3acdca9b8fafdc18984098.1696172660.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04sctp: update transport state when processing a dupcook packetXin Long1-2/+1
During the 4-way handshake, the transport's state is set to ACTIVE in sctp_process_init() when processing INIT_ACK chunk on client or COOKIE_ECHO chunk on server. In the collision scenario below: 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] when processing COOKIE_ECHO on 192.168.1.2, as it's in COOKIE_WAIT state, sctp_sf_do_dupcook_b() is called by sctp_sf_do_5_2_4_dupcook() where it creates a new association and sets its transport to ACTIVE then updates to the old association in sctp_assoc_update(). However, in sctp_assoc_update(), it will skip the transport update if it finds a transport with the same ipaddr already existing in the old asoc, and this causes the old asoc's transport state not to move to ACTIVE after the handshake. This means if DATA retransmission happens at this moment, it won't be able to enter PF state because of the check 'transport->state == SCTP_ACTIVE' in sctp_do_8_2_transport_strike(). This patch fixes it by updating the transport in sctp_assoc_update() with sctp_assoc_add_peer() where it updates the transport state if there is already a transport with the same ipaddr exists in the old asoc. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/fd17356abe49713ded425250cc1ae51e9f5846c6.1696172325.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04tcp: fix delayed ACKs for MSS boundary conditionNeal Cardwell1-0/+13
This commit fixes poor delayed ACK behavior that can cause poor TCP latency in a particular boundary condition: when an application makes a TCP socket write that is an exact multiple of the MSS size. The problem is that there is painful boundary discontinuity in the current delayed ACK behavior. With the current delayed ACK behavior, we have: (1) If an app reads data when > 1*MSS is unacknowledged, then tcp_cleanup_rbuf() ACKs immediately because of: tp->rcv_nxt - tp->rcv_wup > icsk->icsk_ack.rcv_mss || (2) If an app reads all received data, and the packets were < 1*MSS, and either (a) the app is not ping-pong or (b) we received two packets < 1*MSS, then tcp_cleanup_rbuf() ACKs immediately beecause of: ((icsk->icsk_ack.pending & ICSK_ACK_PUSHED2) || ((icsk->icsk_ack.pending & ICSK_ACK_PUSHED) && !inet_csk_in_pingpong_mode(sk))) && (3) *However*: if an app reads exactly 1*MSS of data, tcp_cleanup_rbuf() does not send an immediate ACK. This is true even if the app is not ping-pong and the 1*MSS of data had the PSH bit set, suggesting the sending application completed an application write. Thus if the app is not ping-pong, we have this painful case where >1*MSS gets an immediate ACK, and <1*MSS gets an immediate ACK, but a write whose last skb is an exact multiple of 1*MSS can get a 40ms delayed ACK. This means that any app that transfers data in one direction and takes care to align write size or packet size with MSS can suffer this problem. With receive zero copy making 4KB MSS values more common, it is becoming more common to have application writes naturally align with MSS, and more applications are likely to encounter this delayed ACK problem. The fix in this commit is to refine the delayed ACK heuristics with a simple check: immediately ACK a received 1*MSS skb with PSH bit set if the app reads all data. Why? If an skb has a len of exactly 1*MSS and has the PSH bit set then it is likely the end of an application write. So more data may not be arriving soon, and yet the data sender may be waiting for an ACK if cwnd-bound or using TX zero copy. Thus we set ICSK_ACK_PUSHED in this case so that tcp_cleanup_rbuf() will send an ACK immediately if the app reads all of the data and is not ping-pong. Note that this logic is also executed for the case where len > MSS, but in that case this logic does not matter (and does not hurt) because tcp_cleanup_rbuf() will always ACK immediately if the app reads data and there is more than an MSS of unACKed data. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Xin Guo <guoxin0309@gmail.com> Link: https://lore.kernel.org/r/20231001151239.1866845-2-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04tcp: fix quick-ack counting to count actual ACKs of new dataNeal Cardwell2-6/+7
This commit fixes quick-ack counting so that it only considers that a quick-ack has been provided if we are sending an ACK that newly acknowledges data. The code was erroneously using the number of data segments in outgoing skbs when deciding how many quick-ack credits to remove. This logic does not make sense, and could cause poor performance in request-response workloads, like RPC traffic, where requests or responses can be multi-segment skbs. When a TCP connection decides to send N quick-acks, that is to accelerate the cwnd growth of the congestion control module controlling the remote endpoint of the TCP connection. That quick-ack decision is purely about the incoming data and outgoing ACKs. It has nothing to do with the outgoing data or the size of outgoing data. And in particular, an ACK only serves the intended purpose of allowing the remote congestion control to grow the congestion window quickly if the ACK is ACKing or SACKing new data. The fix is simple: only count packets as serving the goal of the quickack mechanism if they are ACKing/SACKing new data. We can tell whether this is the case by checking inet_csk_ack_scheduled(), since we schedule an ACK exactly when we are ACKing/SACKing new data. Fixes: fc6415bcb0f5 ("[TCP]: Fix quick-ack decrementing with TSO.") Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231001151239.1866845-1-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04page_pool: fix documentation typosRandy Dunlap1-3/+3
Correct grammar for better readability. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/r/20231001003846.29541-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04tipc: fix a potential deadlock on &tx->lockChengfeng Ye1-2/+2
It seems that tipc_crypto_key_revoke() could be be invoked by wokequeue tipc_crypto_work_rx() under process context and timer/rx callback under softirq context, thus the lock acquisition on &tx->lock seems better use spin_lock_bh() to prevent possible deadlock. This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. tipc_crypto_work_rx() <workqueue> --> tipc_crypto_key_distr() --> tipc_bcast_xmit() --> tipc_bcbase_xmit() --> tipc_bearer_bc_xmit() --> tipc_crypto_xmit() --> tipc_ehdr_build() --> tipc_crypto_key_revoke() --> spin_lock(&tx->lock) <timer interrupt> --> tipc_disc_timeout() --> tipc_bearer_xmit_skb() --> tipc_crypto_xmit() --> tipc_ehdr_build() --> tipc_crypto_key_revoke() --> spin_lock(&tx->lock) <deadlock here> Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Link: https://lore.kernel.org/r/20230927181414.59928-1-dg573847474@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04net: stmmac: dwmac-stm32: fix resume on STM32 MCUBen Wolsieffer1-2/+5
The STM32MP1 keeps clk_rx enabled during suspend, and therefore the driver does not enable the clock in stm32_dwmac_init() if the device was suspended. The problem is that this same code runs on STM32 MCUs, which do disable clk_rx during suspend, causing the clock to never be re-enabled on resume. This patch adds a variant flag to indicate that clk_rx remains enabled during suspend, and uses this to decide whether to enable the clock in stm32_dwmac_init() if the device was suspended. This approach fixes this specific bug with limited opportunity for unintended side-effects, but I have a follow up patch that will refactor the clock configuration and hopefully make it less error prone. Fixes: 6528e02cc9ff ("net: ethernet: stmmac: add adaptation for stm32mp157c.") Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230927175749.1419774-1-ben.wolsieffer@hefring.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04HID: nvidia-shield: Select POWER_SUPPLY Kconfig optionRahul Rameshbabu1-0/+1
Battery information reported by the driver depends on the power supply subsystem. Select the required subsystem when the HID_NVIDIA_SHIELD Kconfig option is enabled. Fixes: 3ab196f88237 ("HID: nvidia-shield: Add battery support for Thunderstrike") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-10-04ipv4: Set offload_failed flag in fibmatch resultsBenjamin Poirier1-0/+2
Due to a small omission, the offload_failed flag is missing from ipv4 fibmatch results. Make sure it is set correctly. The issue can be witnessed using the following commands: echo "1 1" > /sys/bus/netdevsim/new_device ip link add dummy1 up type dummy ip route add 192.0.2.0/24 dev dummy1 echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/fib/fail_route_offload ip route add 198.51.100.0/24 dev dummy1 ip route # 192.168.15.0/24 has rt_trap # 198.51.100.0/24 has rt_offload_failed ip route get 192.168.15.1 fibmatch # Result has rt_trap ip route get 198.51.100.1 fibmatch # Result differs from the route shown by `ip route`, it is missing # rt_offload_failed ip link del dev dummy1 echo 1 > /sys/bus/netdevsim/del_device Fixes: 36c5100e859d ("IPv4: Add "offload failed" indication to routes") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230926182730.231208-1-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timerOza Pawandeep3-2/+29
Arm® Functional Fixed Hardware Specification defines LPI states, which provide an architectural context loss flags field that can be used to describe the context that might be lost when an LPI state is entered. - Core context Lost - General purpose registers. - Floating point and SIMD registers. - System registers, include the System register based - generic timer for the core. - Debug register in the core power domain. - PMU registers in the core power domain. - Trace register in the core power domain. - Trace context loss - GICR - GICD Qualcomm's custom CPUs preserves the architectural state, including keeping the power domain for local timers active. when core is power gated, the local timers are sufficient to wake the core up without needing broadcast timer. The patch fixes the evaluation of cpuidle arch_flags, and moves only to broadcast timer if core context lost is defined in ACPI LPI. Fixes: a36a7fecfe60 ("ACPI / processor_idle: Add support for Low Power Idle(LPI) states") Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Oza Pawandeep <quic_poza@quicinc.com> Link: https://lore.kernel.org/r/20231003173333.2865323-1-quic_poza@quicinc.com Signed-off-by: Will Deacon <will@kernel.org>
2023-10-04netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failureFlorian Westphal1-17/+29
nft_rbtree_gc_elem() walks back and removes the end interval element that comes before the expired element. There is a small chance that we've cached this element as 'rbe_ge'. If this happens, we hold and test a pointer that has been queued for freeing. It also causes spurious insertion failures: $ cat test-testcases-sets-0044interval_overlap_0.1/testout.log Error: Could not process rule: File exists add element t s { 0 - 2 } ^^^^^^ Failed to insert 0 - 2 given: table ip t { set s { type inet_service flags interval,timeout timeout 2s gc-interval 2s } } The set (rbtree) is empty. The 'failure' doesn't happen on next attempt. Reason is that when we try to insert, the tree may hold an expired element that collides with the range we're adding. While we do evict/erase this element, we can trip over this check: if (rbe_ge && nft_rbtree_interval_end(rbe_ge) && nft_rbtree_interval_end(new)) return -ENOTEMPTY; rbe_ge was erased by the synchronous gc, we should not have done this check. Next attempt won't find it, so retry results in successful insertion. Restart in-kernel to avoid such spurious errors. Such restart are rare, unless userspace intentionally adds very large numbers of elements with very short timeouts while setting a huge gc interval. Even in this case, this cannot loop forever, on each retry an existing element has been removed. As the caller is holding the transaction mutex, its impossible for a second entity to add more expiring elements to the tree. After this it also becomes feasible to remove the async gc worker and perform all garbage collection from the commit path. Fixes: c9e6978e2725 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04netfilter: nf_tables: Deduplicate nft_register_obj audit logsPhil Sutter2-16/+48
When adding/updating an object, the transaction handler emits suitable audit log entries already, the one in nft_obj_notify() is redundant. To fix that (and retain the audit logging from objects' 'update' callback), Introduce an "audit log free" variant for internal use. Fixes: c520292f29b8 ("audit: log nftables configuration change events once per table") Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> (Audit) Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04drm/i915: Invalidate the TLBs on each GTChris Wilson1-1/+1
With multi-GT devices, the object may have been bound on each GT and so we need to invalidate the TLBs across all GT before releasing the pages back to the system. Fixes: d6c531ab4820 ("drm/i915: Invalidate the TLBs on each GT") Signed-off-by: Chris Wilson <chris.p.wilson@intel.com> Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> CC: Matt Roper <matthew.d.roper@intel.com> CC: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231002140742.933530-1-jonathan.cavitt@intel.com (cherry picked from commit 6b8ace7a14e7926b7b914ccd96a8ac657c0d518c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-10-04drm/i915: Register engines early to avoid type confusionMathias Krause1-2/+7
Commit 1ec23ed7126e ("drm/i915: Use uabi engines for the default engine map") switched from using for_each_engine() to for_each_uabi_engine() to iterate over the user engines. While this seems to be a sensible change, it's only safe to do when the engines are actually chained using the rb-tree structure which is not the case during early driver initialization where it can be either a lock-less list or regular double-linked list. In fact, the modesetting initialization code may end up calling default_engines() through the fb helper code while the engines list is still llist_node-based: i915_driver_probe() -> intel_display_driver_probe() -> intel_fbdev_init() -> drm_fb_helper_init() -> drm_client_init() -> drm_client_open() -> drm_file_alloc() -> i915_driver_open() -> i915_gem_open() -> i915_gem_context_open() -> i915_gem_create_context() -> default_engines() Using for_each_uabi_engine() in default_engines() is therefore wrong, as it would try to interpret the llist as rb-tree, making it find no engine at all, as the rb_left and rb_right members will still be NULL, as they haven't been initialized yet. To fix this type confusion register the engines earlier and at the same time reduce the amount of code that has to deal with the intermediate llist state. Reported-by: sanity checks in grsecurity Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 1ec23ed7126e ("drm/i915: Use uabi engines for the default engine map") Signed-off-by: Mathias Krause <minipli@grsecurity.net> Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230928182019.10256-2-minipli@grsecurity.net [tursulin: fixed commit tag typo] (cherry picked from commit 2b562f032fc2594fb3fac22b7a2eb3c1969a7ba3) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-10-04drm/i915: Don't set PIPE_CONTROL_FLUSH_L3 for aux invalNirmoy Das1-1/+10
PIPE_CONTROL_FLUSH_L3 is not needed for aux invalidation so don't set that. Fixes: 78a6ccd65fa3 ("drm/i915/gt: Ensure memory quiesced before invalidation") Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.8+ Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Tapani Pälli <tapani.palli@intel.com> Cc: Mark Janes <mark.janes@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Acked-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Tested-by: Tapani Pälli <tapani.palli@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230926142401.25687-1-nirmoy.das@intel.com (cherry picked from commit 03d681412b38558aefe4fb0f46e36efa94bb21ef) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-10-04selftests: netfilter: Extend nft_audit.shPhil Sutter1-16/+81
Add tests for sets and elements and deletion of all kinds. Also reorder rule reset tests: By moving the bulk rule add command up, the two 'reset rules' tests become identical. While at it, fix for a failing bulk rule add test's error status getting lost due to its use in a pipe. Avoid this by using a temporary file. Headings in diff output for failing tests contain no useful data, strip them. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04selftests: netfilter: test for sctp collision processing in nf_conntrackXin Long3-2/+191
This patch adds a test case to reproduce the SCTP DATA chunk retransmission timeout issue caused by the improper SCTP collision processing in netfilter nf_conntrack_proto_sctp. In this test, client sends a INIT chunk, but the INIT_ACK replied from server is delayed until the server sends a INIT chunk to start a new connection from its side. After the connection is complete from server side, the delayed INIT_ACK arrives in nf_conntrack_proto_sctp. The delayed INIT_ACK should be dropped in nf_conntrack_proto_sctp instead of updating the vtag with the out-of-date init_tag, otherwise, the vtag in DATA chunks later sent by client don't match the vtag in the conntrack entry and the DATA chunks get dropped. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04netfilter: handle the connecting collision properly in nf_conntrack_proto_sctpXin Long2-10/+34
In Scenario A and B below, as the delayed INIT_ACK always changes the peer vtag, SCTP ct with the incorrect vtag may cause packet loss. Scenario A: INIT_ACK is delayed until the peer receives its own INIT_ACK 192.168.1.2 > 192.168.1.1: [INIT] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT] [init tag: 1414468151] 192.168.1.2 > 192.168.1.1: [INIT ACK] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT ACK] [init tag: 1650211246] * 192.168.1.2 > 192.168.1.1: [COOKIE ECHO] 192.168.1.1 > 192.168.1.2: [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: [COOKIE ACK] Scenario B: INIT_ACK is delayed until the peer completes its own handshake 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] * This patch fixes it as below: In SCTP_CID_INIT processing: - clear ct->proto.sctp.init[!dir] if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir]. (Scenario E) - set ct->proto.sctp.init[dir]. In SCTP_CID_INIT_ACK processing: - drop it if !ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario B, Scenario C) - drop it if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario A) In SCTP_CID_COOKIE_ACK processing: - clear ct->proto.sctp.init[dir] and ct->proto.sctp.init[!dir]. (Scenario D) Also, it's important to allow the ct state to move forward with cookie_echo and cookie_ack from the opposite dir for the collision scenarios. There are also other Scenarios where it should allow the packet through, addressed by the processing above: Scenario C: new CT is created by INIT_ACK. Scenario D: start INIT on the existing ESTABLISHED ct. Scenario E: start INIT after the old collision on the existing ESTABLISHED ct. 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] (both side are stopped, then start new connection again in hours) 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 242308742] Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04netfilter: nft_payload: rebuild vlan header on h_proto accessFlorian Westphal1-1/+12
nft can perform merging of adjacent payload requests. This means that: ether saddr 00:11 ... ether type 8021ad ... is a single payload expression, for 8 bytes, starting at the ethernet source offset. Check that offset+length is fully within the source/destination mac addersses. This bug prevents 'ether type' from matching the correct h_proto in case vlan tag got stripped. Fixes: de6843be3082 ("netfilter: nft_payload: rebuild vlan header when needed") Reported-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04ibmveth: Remove condition to recompute TCP header checksum.David Wilder1-13/+12
In some OVS environments the TCP pseudo header checksum may need to be recomputed. Currently this is only done when the interface instance is configured for "Trunk Mode". We found the issue also occurs in some Kubernetes environments, these environments do not use "Trunk Mode", therefor the condition is removed. Performance tests with this change show only a fractional decrease in throughput (< 0.2%). Fixes: 7525de2516fb ("ibmveth: Set CHECKSUM_PARTIAL if NULL TCP CSUM.") Signed-off-by: David Wilder <dwilder@us.ibm.com> Reviewed-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-04platform/x86: touchscreen_dmi: Add info for the BUSH Bush Windows tabletTomasz Swiatek1-0/+22
Add touchscreen info for the BUSH Bush Windows tablet. It was tested using gslx680_ts_acpi module and on patched kernel installed on device. Link: https://github.com/onitake/gsl-firmware/pull/215 Link: https://github.com/systemd/systemd/pull/29268 Signed-off-by: Tomasz Swiatek <swiatektomasz99@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-10-04platform/mellanox: tmfifo: fix kernel-doc warningsRandy Dunlap1-6/+8
Fix kernel-doc notation for structs and struct members to prevent these warnings: mlxbf-tmfifo.c:73: warning: cannot understand function prototype: 'struct mlxbf_tmfifo_vring ' mlxbf-tmfifo.c:128: warning: cannot understand function prototype: 'struct mlxbf_tmfifo_vdev ' mlxbf-tmfifo.c:146: warning: cannot understand function prototype: 'struct mlxbf_tmfifo_irq_info ' mlxbf-tmfifo.c:158: warning: cannot understand function prototype: 'struct mlxbf_tmfifo_io ' mlxbf-tmfifo.c:182: warning: cannot understand function prototype: 'struct mlxbf_tmfifo ' mlxbf-tmfifo.c:208: warning: cannot understand function prototype: 'struct mlxbf_tmfifo_msg_hdr ' mlxbf-tmfifo.c:138: warning: Function parameter or member 'config' not described in 'mlxbf_tmfifo_vdev' mlxbf-tmfifo.c:212: warning: Function parameter or member 'unused' not described in 'mlxbf_tmfifo_msg_hdr' Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc") Fixes: bc05ea63b394 ("platform/mellanox: Add BlueField-3 support in the tmfifo driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Closes: lore.kernel.org/r/202309252330.saRU491h-lkp@intel.com Cc: Liming Sun <lsun@mellanox.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: Mark Gross <markgross@kernel.org> Cc: Vadim Pasternak <vadimp@nvidia.com> Cc: platform-driver-x86@vger.kernel.org Link: https://lore.kernel.org/r/20230926054013.11450-1-rdunlap@infradead.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-10-04platform/x86/intel/ifs: release cpus_read_lock()Jithu Joseph1-3/+4
Couple of error paths in do_core_test() was returning directly without doing a necessary cpus_read_unlock(). Following lockdep warning was observed when exercising these scenarios with PROVE_RAW_LOCK_NESTING enabled: [ 139.304775] ================================================ [ 139.311185] WARNING: lock held when returning to user space! [ 139.317593] 6.6.0-rc2ifs01+ #11 Tainted: G S W I [ 139.324499] ------------------------------------------------ [ 139.330908] bash/11476 is leaving the kernel with locks still held! [ 139.338000] 1 lock held by bash/11476: [ 139.342262] #0: ffffffffaa26c930 (cpu_hotplug_lock){++++}-{0:0}, at: do_core_test+0x35/0x1c0 [intel_ifs] Fix the flow so that all scenarios release the lock prior to returning from the function. Fixes: 5210fb4e1880 ("platform/x86/intel/ifs: Sysfs interface for Array BIST") Cc: stable@vger.kernel.org Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Link: https://lore.kernel.org/r/20230927184824.2566086-1-jithu.joseph@intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-10-04platform/x86: hp-bioscfg: Fix reference leakArmin Wolf1-4/+10
If a duplicate attribute is found using kset_find_obj(), a reference to that attribute is returned which needs to be disposed accordingly using kobject_put(). Use kobject_put() to dispose the duplicate attribute in such a case. As a side note, a very similar bug was fixed in commit 7295a996fdab ("platform/x86: dell-sysman: Fix reference leak"), so it seems that the bug was copied from that driver. Compile-tested only. Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg") Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Jorge Lopez <jorge.lopez2@hp.com> Link: https://lore.kernel.org/r/20230925142819.74525-3-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-10-04platform/x86: think-lmi: Fix reference leakArmin Wolf1-4/+20
If a duplicate attribute is found using kset_find_obj(), a reference to that attribute is returned which needs to be disposed accordingly using kobject_put(). Move the setting name validation into a separate function to allow for this change without having to duplicate the cleanup code for this setting. As a side note, a very similar bug was fixed in commit 7295a996fdab ("platform/x86: dell-sysman: Fix reference leak"), so it seems that the bug was copied from that driver. Compile-tested only. Fixes: 1bcad8e510b2 ("platform/x86: think-lmi: Fix issues with duplicate attributes") Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230925142819.74525-2-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-10-04dmaengine: ti: k3-udma-glue: clean up k3_udma_glue_tx_get_irq() returnDan Carpenter3-5/+6
The k3_udma_glue_tx_get_irq() function currently returns negative error codes on error, zero on error and positive values for success. This complicates life for the callers who need to propagate the error code. Also GCC will not warn about unsigned comparisons when you check: if (unsigned_irq <= 0) All the callers have been fixed now but let's just make this easy going forward. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.