aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-sqlite.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-11-13kconfig: kill off GENERIC_IO optionRob Herring3-6/+0
The GENERIC_IO option is set for every architecture except tile and score as those define NO_IOMEM. The option only controls visibility of CONFIG_MTD which doesn't appear to be necessary for any reason, so let's just remove GENERIC_IO. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: user-mode-linux-devel@lists.sourceforge.net Cc: user-mode-linux-user@lists.sourceforge.net Cc: linux-mtd@lists.infradead.org Acked-by: Richard Weinberger <richard@nod.at> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-11-06mtd: Fix C++ comment in include/linux/mtd/mtd.hPavel Machek1-1/+1
C++ comments look wrong in kernel tree. Fix one. Signed-off-by: Pavel Machek <pavel@ucw.cz> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-11-06mtd: constify mtd_partitionArvind Yadav10-10/+10
mtd_partition are not supposed to change at runtime. Functions 'mtd_device_parse_register' working with const mtd_partition provided by <linux/mtd/mtd.h>. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-11-06mtd: plat-ram: Replace manual resource management by devmAnton Vasilyev1-34/+4
Driver contains unsuitable request_mem_region() and release_resource() calls. The patch switches manual resource management by devm interface for readability and error-free simplification. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-10-31mtd: nand: Fix writing mtdoops to nand flash.Brent Taylor1-3/+6
When mtdoops calls mtd_panic_write(), it eventually calls panic_nand_write() in nand_base.c. In order to properly wait for the nand chip to be ready in panic_nand_wait(), the chip must first be selected. When using the atmel nand flash controller, a panic would occur due to a NULL pointer exception. Fixes: 2af7c6539931 ("mtd: Add panic_write for NAND flashes") Cc: <stable@vger.kernel.org> Signed-off-by: Brent Taylor <motobud@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-10-30mtd: intel-spi: Add Intel Lewisburg PCH SPI super SKU PCI IDKuppuswamy Sathyanarayanan1-0/+1
This patch adds Intel Lewisburg PCH SPI serial flash controller super SKU PCI ID. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2017-10-30mtd: nand: mtk: fix infinite ECC decode IRQ issueXiaolei Li1-2/+11
For MT2701 NAND Controller, there may generate infinite ECC decode IRQ during long time burn test on some platforms. Once this issue occurred, the ECC decode IRQ status cannot be cleared in the IRQ handler function, and threads cannot be scheduled. ECC HW generates decode IRQ each sector, so there will have more than one decode IRQ if read one page of large page NAND. Currently, ECC IRQ handle flow is that we will check whether it is decode IRQ at first by reading the register ECC_DECIRQ_STA. This is a read-clear type register. If this IRQ is decode IRQ, then the ECC IRQ signal will be cleared at the same time. Secondly, we will check whether all sectors are decoded by reading the register ECC_DECDONE. This is because the current IRQ may be not dealed in time, and the next sectors have been decoded before reading the register ECC_DECIRQ_STA. Then, the next sectors's decode IRQs will not be generated. Thirdly, if all sectors are decoded by comparing with ecc->sectors, then we will complete ecc->done, set ecc->sectors as 0, and disable ECC IRQ by programming the register ECC_IRQ_REG(op) as 0. Otherwise, wait for the next ECC IRQ. But, there is a timing issue between step one and two. When we read the reigster ECC_DECIRQ_STA, all sectors are decoded except the last sector, and the ECC IRQ signal is cleared. But the last sector is decoded before reading ECC_DECDONE, so the ECC IRQ signal is enabled again by ECC HW, and it means we will receive one extra ECC IRQ later. In step three, we will find that all sectors were decoded, then disable ECC IRQ and return. When deal with the extra ECC IRQ, the ECC IRQ status cannot be cleared anymore. That is because the register ECC_DECIRQ_STA can only be cleared when the register ECC_IRQ_REG(op) is enabled. But actually we have disabled ECC IRQ in the previous ECC IRQ handle. So, there will keep receiving ECC decode IRQ. Now, we read the register ECC_DECIRQ_STA once again before completing the ecc done event. This ensures that there will be no extra ECC decode IRQ. Also, remove writel(0, ecc->regs + ECC_IRQ_REG(op)) from irq handler, because ECC IRQ is disabled in mtk_ecc_disable(). And clear ECC_DECIRQ_STA in mtk_ecc_disable() in case there is a timeout to wait decode IRQ. Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Cc: <stable@vger.kernel.org> Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-10-29Linux 4.14-rc7Linus Torvalds1-1/+1
2017-10-29mtd: spi-nor: Add support for mr25h128Philipp Puschmann3-0/+3
Add Everspin mr25h128 16KB MRAM to the list of supported chips. Signed-off-by: Philipp Puschmann <pp@emlix.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2017-10-29mtd: nand: mtk: change the compile sequence of mtk_nand.o and mtk_ecc.oXiaolei Li1-1/+1
There will get mtk ecc handler during mtk nand probe now. If mtk ecc module is not initialized, then mtk nand probe will return -EPROBE_DEFER, and retry later. Change the compile sequence of mtk_nand.o and mtk_ecc.o, initialize mtk ecc module before mtk nand module. This makes mtk nand module initialized as soon as possible. Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-10-29mtd: spi-nor: enable 4B opcodes for mx66l51235lRoman Yeryomin1-1/+1
Signed-off-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2017-10-29mtd: spi-nor: stm32-quadspi: fix prefetching outside fsizeLudovic Barre1-1/+11
When memory-mapped mode is used, a prefetching mechanism fully managed by the hardware allows to optimize the read from external the QSPI memory. A 32-bytes FIFO is used for prefetching. When the limit of flash size - fifo size is reached the prefetching mechanism tries to read outside the fsize. The stm32 quadspi hardware become busy and should be aborted. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Reported-by: Bruno Herrera <bruherrera@gmail.com> Tested-by: Bruno Herrera <bruherrera@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2017-10-29mtd: spi-nor: stm32-quadspi: change license textLudovic Barre1-3/+16
-Change the license text with long template. -Change Copyright to STMicroelectronics. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2017-10-29mtd: spi-nor: stm32-quadspi: Fix uninitialized error return codeGeert Uytterhoeven1-2/+2
With gcc 4.1.2: drivers/mtd/spi-nor/stm32-quadspi.c: In function ‘stm32_qspi_tx_poll’: drivers/mtd/spi-nor/stm32-quadspi.c:230: warning: ‘ret’ may be used uninitialized in this function Indeed, if stm32_qspi_cmd.len is zero, ret will be uninitialized. This length is passed from outside the driver using the spi_nor.{read,write}{,_reg}() callbacks. Several functions in drivers/mtd/spi-nor/spi-nor.c (e.g. write_enable(), write_disable(), and erase_chip()) call spi_nor.write_reg() with a zero length. Fix this by returning an explicit zero on success. Fixes: 0d43d7ab277a048c ("mtd: spi-nor: add driver for STM32 quad spi flash controller") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2017-10-29selftests: Introduce a new test case to tc testsuiteChris Mi3-5/+40
In this patchset, we fixed a tc bug. This patch adds the test case that reproduces the bug. To run this test case, user should specify an existing NIC device: # sudo ./tdc.py -d enp4s0f0 This test case belongs to category "flower". If user doesn't specify a NIC device, the test cases belong to "flower" will not be run. In this test case, we create 1M filters and all filters share the same action. When destroying all filters, kernel should not panic. It takes about 18s to run it. Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Lucas Bates <lucasb@mojatatu.com> Signed-off-by: Chris Mi <chrism@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>