aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-sqlite.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2025-06-19mlxbf_gige: return EPROBE_DEFER if PHY IRQ is not availableDavid Thompson1-2/+4
The message "Error getting PHY irq. Use polling instead" is emitted when the mlxbf_gige driver is loaded by the kernel before the associated gpio-mlxbf driver, and thus the call to get the PHY IRQ fails since it is not yet available. The driver probe() must return -EPROBE_DEFER if acpi_dev_gpio_irq_get_by() returns the same. Fixes: 6c2a6ddca763 ("net: mellanox: mlxbf_gige: Replace non-standard interrupt handling") Signed-off-by: David Thompson <davthompson@nvidia.com> Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250618135902.346-1-davthompson@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: airoha: Always check return value from airoha_ppe_foe_get_entry()Lorenzo Bianconi1-1/+3
airoha_ppe_foe_get_entry routine can return NULL, so check the returned pointer is not NULL in airoha_ppe_foe_flow_l2_entry_update() Fixes: b81e0f2b58be3 ("net: airoha: Add FLOW_CLS_STATS callback support") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250618-check-ret-from-airoha_ppe_foe_get_entry-v2-1-068dcea3cc66@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19NFC: nci: uart: Set tty->disc_data only in success pathKrzysztof Kozlowski1-4/+4
Setting tty->disc_data before opening the NCI device means we need to clean it up on error paths. This also opens some short window if device starts sending data, even before NCIUARTSETDRIVER IOCTL succeeded (broken hardware?). Close the window by exposing tty->disc_data only on the success path, when opening of the NCI device and try_module_get() succeeds. The code differs in error path in one aspect: tty->disc_data won't be ever assigned thus NULL-ified. This however should not be relevant difference, because of "tty->disc_data=NULL" in nci_uart_tty_open(). Cc: Linus Torvalds <torvalds@linuxfoundation.org> Fixes: 9961127d4bce ("NFC: nci: add generic uart support") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20250618073649.25049-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19calipso: Fix null-ptr-deref in calipso_req_{set,del}attr().Kuniyuki Iwashima1-0/+8
syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ipv6_rcv+0xf9/0x490 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x12e/0x1f0 net/core/dev.c:5896 __netif_receive_skb+0x1d/0x170 net/core/dev.c:6009 process_backlog+0x41e/0x13b0 net/core/dev.c:6357 __napi_poll+0xbd/0x710 net/core/dev.c:7191 napi_poll net/core/dev.c:7260 [inline] net_rx_action+0x9de/0xde0 net/core/dev.c:7382 handle_softirqs+0x19a/0x770 kernel/softirq.c:561 do_softirq.part.0+0x36/0x70 kernel/softirq.c:462 </IRQ> <TASK> do_softirq arch/x86/include/asm/preempt.h:26 [inline] __local_bh_enable_ip+0xf1/0x110 kernel/softirq.c:389 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0xc2a/0x3c40 net/core/dev.c:4679 dev_queue_xmit include/linux/netdevice.h:3313 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip6_finish_output2+0xd69/0x1f80 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0x5dc/0xd60 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x24b/0x8d0 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:459 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_xmit+0xbbc/0x20d0 net/ipv6/ip6_output.c:366 inet6_csk_xmit+0x39a/0x720 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x1a7b/0x3b40 net/ipv4/tcp_output.c:1471 tcp_transmit_skb net/ipv4/tcp_output.c:1489 [inline] tcp_send_syn_data net/ipv4/tcp_output.c:4059 [inline] tcp_connect+0x1c0c/0x4510 net/ipv4/tcp_output.c:4148 tcp_v6_connect+0x156c/0x2080 net/ipv6/tcp_ipv6.c:333 __inet_stream_connect+0x3a7/0xed0 net/ipv4/af_inet.c:677 tcp_sendmsg_fastopen+0x3e2/0x710 net/ipv4/tcp.c:1039 tcp_sendmsg_locked+0x1e82/0x3570 net/ipv4/tcp.c:1091 tcp_sendmsg+0x2f/0x50 net/ipv4/tcp.c:1358 inet6_sendmsg+0xb9/0x150 net/ipv6/af_inet6.c:659 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0xf4/0x2a0 net/socket.c:733 __sys_sendto+0x29a/0x390 net/socket.c:2187 __do_sys_sendto net/socket.c:2194 [inline] __se_sys_sendto net/socket.c:2190 [inline] __x64_sys_sendto+0xe1/0x1c0 net/socket.c:2190 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xc3/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f06553c47ed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f0653a06fc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f0655605fa0 RCX: 00007f06553c47ed RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000000b RBP: 00007f065545db38 R08: 0000200000000140 R09: 000000000000001c R10: f7384d4ea84b01bd R11: 0000000000000246 R12: 0000000000000000 R13: 00007f0655605fac R14: 00007f0655606038 R15: 00007f06539e7000 </TASK> Modules linked in: [1]: dnf install -y selinux-policy-targeted policycoreutils netlabel_tools procps-ng nmap-ncat mount -t selinuxfs none /sys/fs/selinux load_policy netlabelctl calipso add pass doi:1 netlabelctl map del default netlabelctl map add default address:::1 protocol:calipso,1 sysctl net.ipv4.tcp_syncookies=2 nc -l ::1 80 & nc ::1 80 Fixes: e1adea927080 ("calipso: Allow request sockets to be relabelled by the lsm.") Reported-by: syzkaller <syzkaller@googlegroups.com> Reported-by: John Cheung <john.cs.hey@gmail.com> Closes: https://lore.kernel.org/netdev/CAP=Rh=MvfhrGADy+-WJiftV2_WzMH4VEhEFmeT28qY+4yxNu4w@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Acked-by: Paul Moore <paul@paul-moore.com> Link: https://patch.msgid.link/20250617224125.17299-1-kuni1840@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19MAINTAINERS: Remove Shannon Nelson from MAINTAINERS fileShannon Nelson2-7/+5
Brett Creeley is taking ownership of AMD/Pensando drivers while I wander off into the sunset with my retirement this month. I'll still keep an eye out on a few topics for awhile, and maybe do some free-lance work in the future. Meanwhile, thank you all for the fun and support and the many learning opportunities :-). Special thanks go to DaveM for merging my first patch long ago, the big ionic patchset a few years ago, and my last patchset last week. Redirect things to a non-corporate account. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Link: https://patch.msgid.link/20250616224437.56581-1-shannon.nelson@amd.com [Jakub: squash in the .mailmap update] Signed-off-by: Shannon Nelson <sln@onemain.com> Link: https://patch.msgid.link/20250619010603.1173141-1-sln@onemain.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get()Alexey Kodanev1-2/+2
Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8). This seems correct and aligns with the PTP interrupt status register (PTP_INT_STS) specifications. However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index: lan743x_ptp_io_event_clock_get(..., u8 channel,...) { ... /* Update Local timestamp */ extts = &ptp->extts[channel]; extts->ts.tv_sec = sec; ... } To avoid an out-of-bounds write and utilize all the supported GPIO inputs, set LAN743X_PTP_N_EXTTS to 8. Detected using the static analysis tool - Svace. Fixes: 60942c397af6 ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)") Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://patch.msgid.link/20250616113743.36284-1-aleksei.kodanev@bell-sw.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-19eth: fbnic: avoid double free when failing to DMA-map FW msgJakub Kicinski1-4/+1
The semantics are that caller of fbnic_mbx_map_msg() retains the ownership of the message on error. All existing callers dutifully free the page. Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism") Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250616195510.225819-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-18tcp: fix passive TFO socket having invalid NAPI IDDavid Wei1-0/+3
There is a bug with passive TFO sockets returning an invalid NAPI ID 0 from SO_INCOMING_NAPI_ID. Normally this is not an issue, but zero copy receive relies on a correct NAPI ID to process sockets on the right queue. Fix by adding a sk_mark_napi_id_set(). Fixes: e5907459ce7e ("tcp: Record Rx hash and NAPI ID in tcp_child_process") Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250617212102.175711-5-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18selftests: net: add test for passive TFO socket NAPI IDDavid Wei2-0/+113
Add a test that checks that the NAPI ID of a passive TFO socket is valid i.e. not zero. Signed-off-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250617212102.175711-4-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18selftests: net: add passive TFO test binaryDavid Wei3-0/+173
Add a simple passive TFO server and client test binary. This will be used to test the SO_INCOMING_NAPI_ID of passive TFO accepted sockets. Signed-off-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250617212102.175711-3-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18selftests: netdevsim: improve lib.sh include in peer.shDavid Wei1-1/+2
Fix the peer.sh test to run from INSTALL_PATH. Signed-off-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250617212102.175711-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearerHaixia Qu1-2/+2
The reproduction steps: 1. create a tun interface 2. enable l2 bearer 3. TIPC_NL_UDP_GET_REMOTEIP with media name set to tun tipc: Started in network mode tipc: Node identity 8af312d38a21, cluster identity 4711 tipc: Enabled bearer <eth:syz_tun>, priority 1 Oops: general protection fault KASAN: null-ptr-deref in range CPU: 1 UID: 1000 PID: 559 Comm: poc Not tainted 6.16.0-rc1+ #117 PREEMPT Hardware name: QEMU Ubuntu 24.04 PC RIP: 0010:tipc_udp_nl_dump_remoteip+0x4a4/0x8f0 the ub was in fact a struct dev. when bid != 0 && skip_cnt != 0, bearer_list[bid] may be NULL or other media when other thread changes it. fix this by checking media_id. Fixes: 832629ca5c313 ("tipc: add UDP remoteip dump to netlink API") Signed-off-by: Haixia Qu <hxqu@hillstonenet.com> Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech> Link: https://patch.msgid.link/20250617055624.2680-1-hxqu@hillstonenet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18Octeontx2-pf: Fix Backpresure configurationHariprasad Kelam1-2/+2
NIX block can receive packets from multiple links such as MAC (RPM), LBK and CPT. ----------------- RPM --| NIX | ----------------- | | LBK Each link supports multiple channels for example RPM link supports 16 channels. In case of link oversubsribe, NIX will assert backpressure on receive channels. The previous patch considered a single channel per link, resulting in backpressure not being enabled on the remaining channels Fixes: a7ef63dbd588 ("octeontx2-af: Disable backpressure between CPT and NIX") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250617063403.3582210-1-hkelam@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18net: ftgmac100: select FIXED_PHYHeiner Kallweit1-0/+1
Depending on e.g. DT configuration this driver uses a fixed link. So we shouldn't rely on the user to enable FIXED_PHY, select it in Kconfig instead. We may end up with a non-functional driver otherwise. Fixes: 38561ded50d0 ("net: ftgmac100: support fixed link") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/476bb33b-5584-40f0-826a-7294980f2895@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18net: ethtool: remove duplicate defines for family infoJakub Kicinski3-6/+5
Commit under fixes switched to uAPI generation from the YAML spec. A number of custom defines were left behind, mostly for commands very hard to express in YAML spec. Among what was left behind was the name and version of the generic netlink family. Problem is that the codegen always outputs those values so we ended up with a duplicated, differently named set of defines. Provide naming info in YAML and remove the incorrect defines. Fixes: 8d0580c6ebdd ("ethtool: regenerate uapi header from the spec") Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250617202240.811179-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18tcp: fix tcp_packet_delayed() for tcp_is_non_sack_preventing_reopen() behaviorNeal Cardwell1-12/+25
After the following commit from 2024: commit e37ab7373696 ("tcp: fix to allow timestamp undo if no retransmits were sent") ...there was buggy behavior where TCP connections without SACK support could easily see erroneous undo events at the end of fast recovery or RTO recovery episodes. The erroneous undo events could cause those connections to suffer repeated loss recovery episodes and high retransmit rates. The problem was an interaction between the non-SACK behavior on these connections and the undo logic. The problem is that, for non-SACK connections at the end of a loss recovery episode, if snd_una == high_seq, then tcp_is_non_sack_preventing_reopen() holds steady in CA_Recovery or CA_Loss, but clears tp->retrans_stamp to 0. Then upon the next ACK the "tcp: fix to allow timestamp undo if no retransmits were sent" logic saw the tp->retrans_stamp at 0 and erroneously concluded that no data was retransmitted, and erroneously performed an undo of the cwnd reduction, restoring cwnd immediately to the value it had before loss recovery. This caused an immediate burst of traffic and build-up of queues and likely another immediate loss recovery episode. This commit fixes tcp_packet_delayed() to ignore zero retrans_stamp values for non-SACK connections when snd_una is at or above high_seq, because tcp_is_non_sack_preventing_reopen() clears retrans_stamp in this case, so it's not a valid signal that we can undo. Note that the commit named in the Fixes footer restored long-present behavior from roughly 2005-2019, so apparently this bug was present for a while during that era, and this was simply not caught. Fixes: e37ab7373696 ("tcp: fix to allow timestamp undo if no retransmits were sent") Reported-by: Eric Wheeler <netdev@lists.ewheeler.net> Closes: https://lore.kernel.org/netdev/64ea9333-e7f9-0df-b0f2-8d566143acab@ewheeler.net/ Signed-off-by: Neal Cardwell <ncardwell@google.com> Co-developed-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-17atm: Revert atm_account_tx() if copy_from_iter_full() fails.Kuniyuki Iwashima3-1/+8
In vcc_sendmsg(), we account skb->truesize to sk->sk_wmem_alloc by atm_account_tx(). It is expected to be reverted by atm_pop_raw() later called by vcc->dev->ops->send(vcc, skb). However, vcc_sendmsg() misses the same revert when copy_from_iter_full() fails, and then we will leak a socket. Let's factorise the revert part as atm_return_tx() and call it in the failure path. Note that the corresponding sk_wmem_alloc operation can be found in alloc_tx() as of the blamed commit. $ git blame -L:alloc_tx net/atm/common.c c55fa3cccbc2c~ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20250614161959.GR414686@horms.kernel.org/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250616182147.963333-3-kuni1840@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17atm: atmtcp: Free invalid length skb in atmtcp_c_send().Kuniyuki Iwashima1-1/+3
syzbot reported the splat below. [0] vcc_sendmsg() copies data passed from userspace to skb and passes it to vcc->dev->ops->send(). atmtcp_c_send() accesses skb->data as struct atmtcp_hdr after checking if skb->len is 0, but it's not enough. Also, when skb->len == 0, skb and sk (vcc) were leaked because dev_kfree_skb() is not called and sk_wmem_alloc adjustment is missing to revert atm_account_tx() in vcc_sendmsg(), which is expected to be done in atm_pop_raw(). Let's properly free skb with an invalid length in atmtcp_c_send(). [0]: BUG: KMSAN: uninit-value in atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294 atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294 vcc_sendmsg+0xd7c/0xff0 net/atm/common.c:644 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:727 ____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2620 __sys_sendmsg net/socket.c:2652 [inline] __do_sys_sendmsg net/socket.c:2657 [inline] __se_sys_sendmsg net/socket.c:2655 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655 x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4154 [inline] slab_alloc_node mm/slub.c:4197 [inline] kmem_cache_alloc_node_noprof+0x818/0xf00 mm/slub.c:4249 kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:579 __alloc_skb+0x347/0x7d0 net/core/skbuff.c:670 alloc_skb include/linux/skbuff.h:1336 [inline] vcc_sendmsg+0xb40/0xff0 net/atm/common.c:628 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:727 ____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2620 __sys_sendmsg net/socket.c:2652 [inline] __do_sys_sendmsg net/socket.c:2657 [inline] __se_sys_sendmsg net/socket.c:2655 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655 x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 5798 Comm: syz-executor192 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(undef) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+1d3c235276f62963e93a@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=1d3c235276f62963e93a Tested-by: syzbot+1d3c235276f62963e93a@syzkaller.appspotmail.com Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250616182147.963333-2-kuni1840@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17mpls: Use rcu_dereference_rtnl() in mpls_route_input_rcu().Kuniyuki Iwashima1-2/+2
As syzbot reported [0], mpls_route_input_rcu() can be called from mpls_getroute(), where is under RTNL. net->mpls.platform_label is only updated under RTNL. Let's use rcu_dereference_rtnl() in mpls_route_input_rcu() to silence the splat. [0]: WARNING: suspicious RCU usage 6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 Not tainted ---------------------------- net/mpls/af_mpls.c:84 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz.2.4451/17730: #0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock net/core/rtnetlink.c:80 [inline] #0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg+0x371/0xe90 net/core/rtnetlink.c:6961 stack backtrace: CPU: 1 UID: 0 PID: 17730 Comm: syz.2.4451 Not tainted 6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 lockdep_rcu_suspicious+0x166/0x260 kernel/locking/lockdep.c:6865 mpls_route_input_rcu+0x1d4/0x200 net/mpls/af_mpls.c:84 mpls_getroute+0x621/0x1ea0 net/mpls/af_mpls.c:2381 rtnetlink_rcv_msg+0x3c9/0xe90 net/core/rtnetlink.c:6964 netlink_rcv_skb+0x16d/0x440 net/netlink/af_netlink.c:2534 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] ____sys_sendmsg+0xa98/0xc70 net/socket.c:2566 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 __sys_sendmmsg+0x200/0x420 net/socket.c:2709 __do_sys_sendmmsg net/socket.c:2736 [inline] __se_sys_sendmmsg net/socket.c:2733 [inline] __x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2733 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x230 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0a2818e969 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f0a28f52038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f0a283b5fa0 RCX: 00007f0a2818e969 RDX: 0000000000000003 RSI: 0000200000000080 RDI: 0000000000000003 RBP: 00007f0a28210ab1 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f0a283b5fa0 R15: 00007ffce5e9f268 </TASK> Fixes: 0189197f4416 ("mpls: Basic routing support") Reported-by: syzbot+8a583bdd1a5cc0b0e068@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/68507981.a70a0220.395abc.01ef.GAE@google.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250616201532.1036568-1-kuni1840@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17net/sched: fix use-after-free in taprio_dev_notifierHyunwoo Kim1-2/+4
Since taprio’s taprio_dev_notifier() isn’t protected by an RCU read-side critical section, a race with advance_sched() can lead to a use-after-free. Adding rcu_read_lock() inside taprio_dev_notifier() prevents this. Fixes: fed87cc6718a ("net/sched: taprio: automatically calculate queueMaxSDU based on TC gate durations") Cc: stable@vger.kernel.org Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/aEzIYYxt0is9upYG@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17ptp: allow reading of currently dialed frequency to succeed on free-running clocksVladimir Oltean1-1/+2
There is a bug in ptp_clock_adjtime() which makes it refuse the operation even if we just want to read the current clock dialed frequency, not modify anything (tx->modes == 0). That should be possible even if the clock is free-running. For context, the kernel UAPI is the same for getting and setting the frequency of a POSIX clock. For example, ptp4l errors out at clock_create() -> clockadj_get_freq() -> clock_adjtime() time, when it should logically only have failed on actual adjustments to the clock, aka if the clock was configured as slave. But in master mode it should work. This was discovered when examining the issue described in the previous commit, where ptp_clock_freerun() returned true despite n_vclocks being zero. Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250613174749.406826-3-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17ptp: fix breakage after ptp_vclock_in_use() reworkVladimir Oltean1-1/+21
What is broken -------------- ptp4l, and any other application which calls clock_adjtime() on a physical clock, is greeted with error -EBUSY after commit 87f7ce260a3c ("ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()"). Explanation for the breakage ---------------------------- The blamed commit was based on the false assumption that ptp_vclock_in_use() callers already test for n_vclocks prior to calling this function. This is notably incorrect for the code path below, in which there is, in fact, no n_vclocks test: ptp_clock_adjtime() -> ptp_clock_freerun() -> ptp_vclock_in_use() The result is that any clock adjustment on any physical clock is now impossible. This is _despite_ there not being any vclock over this physical clock. $ ptp4l -i eno0 -2 -P -m ptp4l[58.425]: selected /dev/ptp0 as PTP clock [ 58.429749] ptp: physical clock is free running ptp4l[58.431]: Failed to open /dev/ptp0: Device or resource busy failed to create a clock $ cat /sys/class/ptp/ptp0/n_vclocks 0 The patch makes the ptp_vclock_in_use() function say "if it's not a virtual clock, then this physical clock does have virtual clocks on top". Then ptp_clock_freerun() uses this information to say "this physical clock has virtual clocks on top, so it must stay free-running". Then ptp_clock_adjtime() uses this information to say "well, if this physical clock has to be free-running, I can't do it, return -EBUSY". Simply put, ptp_vclock_in_use() cannot be simplified so as to remove the test whether vclocks are in use. What did the blamed commit intend to fix ---------------------------------------- The blamed commit presents a lockdep warning stating "possible recursive locking detected", with the n_vclocks_store() and ptp_clock_unregister() functions involved. The recursive locking seems this: n_vclocks_store() -> mutex_lock_interruptible(&ptp->n_vclocks_mux) // 1 -> device_for_each_child_reverse(..., unregister_vclock) -> unregister_vclock() -> ptp_vclock_unregister() -> ptp_clock_unregister() -> ptp_vclock_in_use() -> mutex_lock_interruptible(&ptp->n_vclocks_mux) // 2 The issue can be triggered by creating and then deleting vclocks: $ echo 2 > /sys/class/ptp/ptp0/n_vclocks $ echo 0 > /sys/class/ptp/ptp0/n_vclocks But note that in the original stack trace, the address of the first lock is different from the address of the second lock. This is because at step 1 marked above, &ptp->n_vclocks_mux is the lock of the parent (physical) PTP clock, and at step 2, the lock is of the child (virtual) PTP clock. They are different locks of different devices. In this situation there is no real deadlock, the lockdep warning is caused by the fact that the mutexes have the same lock class on both the parent and the child. Functionally it is fine. Proposed alternative solution ----------------------------- We must reintroduce the body of ptp_vclock_in_use() mostly as it was structured prior to the blamed commit, but avoid the lockdep warning. Based on the fact that vclocks cannot be nested on top of one another (ptp_is_attribute_visible() hides n_vclocks for virtual clocks), we already know that ptp->n_vclocks is zero for a virtual clock. And ptp->is_virtual_clock is a runtime invariant, established at ptp_clock_register() time and never changed. There is no need to serialize on any mutex in order to read ptp->is_virtual_clock, and we take advantage of that by moving it outside the lock. Thus, virtual clocks do not need to acquire &ptp->n_vclocks_mux at all, and step 2 in the code walkthrough above can simply go away. We can simply return false to the question "ptp_vclock_in_use(a virtual clock)". Other notes ----------- Releasing &ptp->n_vclocks_mux before ptp_vclock_in_use() returns execution seems racy, because the returned value can become stale as soon as the function returns and before the return value is used (i.e. n_vclocks_store() can run any time). The locking requirement should somehow be transferred to the caller, to ensure a longer life time for the returned value, but this seems out of scope for this severe bug fix. Because we are also fixing up the logic from the original commit, there is another Fixes: tag for that. Fixes: 87f7ce260a3c ("ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()") Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250613174749.406826-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17bnxt_en: Update MRU and RSS table of RSS contexts on queue resetPavan Chebbi1-5/+51
The commit under the Fixes tag below which updates the VNICs' RSS and MRU during .ndo_queue_start(), needs to be extended to cover any non-default RSS contexts which have their own VNICs. Without this step, packets that are destined to a non-default RSS context may be dropped after .ndo_queue_start(). We further optimize this scheme by updating the VNIC only if the RX ring being restarted is in the RSS table of the VNIC. Updating the VNIC (in particular setting the MRU to 0) will momentarily stop all traffic to all rings in the RSS table. Any VNIC that has the RX ring excluded from the RSS table can skip this step and avoid the traffic disruption. Note that this scheme is just an improvement. A VNIC with multiple rings in the RSS table will still see traffic disruptions to all rings in the RSS table when one of the rings is being restarted. We are working on a FW scheme that will improve upon this further. Fixes: 5ac066b7b062 ("bnxt_en: Fix queue start to update vnic RSS table") Reported-by: David Wei <dw@davidwei.uk> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250613231841.377988-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17bnxt_en: Add a helper function to configure MRU and RSSPavan Chebbi1-11/+26
Add a new helper function that will configure MRU and RSS table of a VNIC. This will be useful when we configure both on a VNIC when resetting an RX ring. This function will be used again in the next bug fix patch where we have to reconfigure VNICs for RSS contexts. Suggested-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Wei <dw@davidwei.uk> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250613231841.377988-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17bnxt_en: Fix double invocation of bnxt_ulp_stop()/bnxt_ulp_start()Kalesh AP1-14/+10
Before the commit under the Fixes tag below, bnxt_ulp_stop() and bnxt_ulp_start() were always invoked in pairs. After that commit, the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop() has been called. This may result in the RoCE driver's aux driver .suspend() method being invoked twice. The 2nd bnxt_re_suspend() call will crash when it dereferences a NULL pointer: (NULL ib_device): Handle device suspend call BUG: kernel NULL pointer dereference, address: 0000000000000b78 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en] RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re] Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00 RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070 R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bnxt_ulp_stop+0x69/0x90 [bnxt_en] bnxt_sp_task+0x678/0x920 [bnxt_en] ? __schedule+0x514/0xf50 process_scheduled_works+0x9d/0x400 worker_thread+0x11c/0x260 ? __pfx_worker_thread+0x10/0x10 kthread+0xfe/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2b/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag is already set. This will preserve the original symmetrical bnxt_ulp_stop() and bnxt_ulp_start(). Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED flag after taking the mutex to avoid any race condition. And for symmetry, only proceed in bnxt_ulp_start() if the BNXT_EN_FLAG_ULP_STOPPED is set. Fixes: 3c163f35bd50 ("bnxt_en: Optimize recovery path ULP locking in the driver") Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Co-developed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250613231841.377988-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17net: netmem: fix skb_ensure_writable with unreadable skbsMina Almasry1-3/+0
skb_ensure_writable should succeed when it's trying to write to the header of the unreadable skbs, so it doesn't need an unconditional skb_frags_readable check. The preceding pskb_may_pull() call will succeed if write_len is within the head and fail if we're trying to write to the unreadable payload, so we don't need an additional check. Removing this check restores DSCP functionality with unreadable skbs as it's called from dscp_tg. Cc: willemb@google.com Cc: asml.silence@gmail.com Fixes: 65249feb6b3d ("net: add support for skbs with unreadable frags") Signed-off-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250615200733.520113-1-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17net: ti: icssg-prueth: Fix packet handling for XDP_TXMeghana Malladi1-17/+2
While transmitting XDP frames for XDP_TX, page_pool is used to get the DMA buffers (already mapped to the pages) and need to be freed/reycled once the transmission is complete. This need not be explicitly done by the driver as this is handled more gracefully by the xdp driver while returning the xdp frame. __xdp_return() frees the XDP memory based on its memory type, under which page_pool memory is also handled. This change fixes the transmit queue timeout while running XDP_TX. logs: [ 309.069682] icssg-prueth icssg1-eth eth2: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 45860 ms [ 313.933780] icssg-prueth icssg1-eth eth2: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 50724 ms [ 319.053656] icssg-prueth icssg1-eth eth2: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 55844 ms ... Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250616063319.3347541-1-m-malladi@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17e1000e: set fixed clock frequency indication for Nahum 11 and Nahum 13Vitaly Lifshits2-6/+16
On some systems with Nahum 11 and Nahum 13 the value of the XTAL clock in the software STRAP is incorrect. This causes the PTP timer to run at the wrong rate and can lead to synchronization issues. The STRAP value is configured by the system firmware, and a firmware update is not always possible. Since the XTAL clock on these systems always runs at 38.4MHz, the driver may ignore the STRAP and just set the correct value. Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake") Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Reviewed-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-17ice: fix eswitch code memory leak in reset scenarioGrzegorz Nitka1-1/+5
Add simple eswitch mode checker in attaching VF procedure and allocate required port representor memory structures only in switchdev mode. The reset flows triggers VF (if present) detach/attach procedure. It might involve VF port representor(s) re-creation if the device is configured is switchdev mode (not legacy one). The memory was blindly allocated in current implementation, regardless of the mode and not freed if in legacy mode. Kmemeleak trace: unreferenced object (percpu) 0x7e3bce5b888458 (size 40): comm "bash", pid 1784, jiffies 4295743894 hex dump (first 32 bytes on cpu 45): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): pcpu_alloc_noprof+0x4c4/0x7c0 ice_repr_create+0x66/0x130 [ice] ice_repr_create_vf+0x22/0x70 [ice] ice_eswitch_attach_vf+0x1b/0xa0 [ice] ice_reset_all_vfs+0x1dd/0x2f0 [ice] ice_pci_err_resume+0x3b/0xb0 [ice] pci_reset_function+0x8f/0x120 reset_store+0x56/0xa0 kernfs_fop_write_iter+0x120/0x1b0 vfs_write+0x31c/0x430 ksys_write+0x61/0xd0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Testing hints (ethX is PF netdev): - create at least one VF echo 1 > /sys/class/net/ethX/device/sriov_numvfs - trigger the reset echo 1 > /sys/class/net/ethX/device/reset Fixes: 415db8399d06 ("ice: make representor code generic") Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-17net: ice: Perform accurate aRFS flow matchKrishna Kumar1-0/+48
This patch fixes an issue seen in a large-scale deployment under heavy incoming pkts where the aRFS flow wrongly matches a flow and reprograms the NIC with wrong settings. That mis-steering causes RX-path latency spikes and noisy neighbor effects when many connections collide on the same hash (some of our production servers have 20-30K connections). set_rps_cpu() calls ndo_rx_flow_steer() with flow_id that is calculated by hashing the skb sized by the per rx-queue table size. This results in multiple connections (even across different rx-queues) getting the same hash value. The driver steer function modifies the wrong flow to use this rx-queue, e.g.: Flow#1 is first added: Flow#1: <ip1, port1, ip2, port2>, Hash 'h', q#10 Later when a new flow needs to be added: Flow#2: <ip3, port3, ip4, port4>, Hash 'h', q#20 The driver finds the hash 'h' from Flow#1 and updates it to use q#20. This results in both flows getting un-optimized - packets for Flow#1 goes to q#20, and then reprogrammed back to q#10 later and so on; and Flow #2 programming is never done as Flow#1 is matched first for all misses. Many flows may wrongly share the same hash and reprogram rules of the original flow each with their own q#. Tested on two 144-core servers with 16K netperf sessions for 180s. Netperf clients are pinned to cores 0-71 sequentially (so that wrong packets on q#s 72-143 can be measured). IRQs are set 1:1 for queues -> CPUs, enable XPS, enable aRFS (global value is 144 * rps_flow_cnt). Test notes about results from ice_rx_flow_steer(): --------------------------------------------------- 1. "Skip:" counter increments here: if (fltr_info->q_index == rxq_idx || arfs_entry->fltr_state != ICE_ARFS_ACTIVE) goto out; 2. "Add:" counter increments here: ret = arfs_entry->fltr_info.fltr_id; INIT_HLIST_NODE(&arfs_entry->list_entry); 3. "Update:" counter increments here: /* update the queue to forward to on an already existing flow */ Runtime comparison: original code vs with the patch for different rps_flow_cnt values. +-------------------------------+--------------+--------------+ | rps_flow_cnt | 512 | 2048 | +-------------------------------+--------------+--------------+ | Ratio of Pkts on Good:Bad q's | 214 vs 822K | 1.1M vs 980K | | Avoid wrong aRFS programming | 0 vs 310K | 0 vs 30K | | CPU User | 216 vs 183 | 216 vs 206 | | CPU System | 1441 vs 1171 | 1447 vs 1320 | | CPU Softirq | 1245 vs 920 | 1238 vs 961 | | CPU Total | 29 vs 22.7 | 29 vs 24.9 | | aRFS Update | 533K vs 59 | 521K vs 32 | | aRFS Skip | 82M vs 77M | 7.2M vs 4.5M | +-------------------------------+--------------+--------------+ A separate TCP_STREAM and TCP_RR with 1,4,8,16,64,128,256,512 connections showed no performance degradation. Some points on the patch/aRFS behavior: 1. Enabling full tuple matching ensures flows are always correctly matched, even with smaller hash sizes. 2. 5-6% drop in CPU utilization as the packets arrive at the correct CPUs and fewer calls to driver for programming on misses. 3. Larger hash tables reduces mis-steering due to more unique flow hashes, but still has clashes. However, with larger per-device rps_flow_cnt, old flows take more time to expire and new aRFS flows cannot be added if h/w limits are reached (rps_may_expire_flow() succeeds when 10*rps_flow_cnt pkts have been processed by this cpu that are not part of the flow). Fixes: 28bf26724fdb0 ("ice: Implement aRFS") Signed-off-by: Krishna Kumar <krikku@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-17can: tcan4x5x: fix power regulator retrieval during probeBrett Werling1-4/+5
Fixes the power regulator retrieval in tcan4x5x_can_probe() by ensuring the regulator pointer is not set to NULL in the successful return from devm_regulator_get_optional(). Fixes: 3814ca3a10be ("can: tcan4x5x: tcan4x5x_can_probe(): turn on the power before parsing the config") Signed-off-by: Brett Werling <brett.werling@garmin.com> Link: https://patch.msgid.link/20250612191825.3646364-1-brett.werling@garmin.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-06-17openvswitch: Allocate struct ovs_pcpu_storage dynamicallySebastian Andrzej Siewior3-21/+47
PERCPU_MODULE_RESERVE defines the maximum size that can by used for the per-CPU data size used by modules. This is 8KiB. Commit 035fcdc4d240c ("openvswitch: Merge three per-CPU structures into one") restructured the per-CPU memory allocation for the module and moved the separate alloc_percpu() invocations at module init time to a static per-CPU variable which is allocated by the module loader. The size of the per-CPU data section for openvswitch is 6488 bytes which is ~80% of the available per-CPU memory. Together with a few other modules it is easy to exhaust the available 8KiB of memory. Allocate ovs_pcpu_storage dynamically at module init time. Reported-by: Gal Pressman <gal@nvidia.com> Closes: https://lore.kernel.org/all/c401e017-f8db-4f57-a1cd-89beb979a277@nvidia.com Fixes: 035fcdc4d240c ("openvswitch: Merge three per-CPU structures into one") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Aaron Conole <aconole@redhat.com> Link: https://patch.msgid.link/20250613123629.-XSoQTCu@linutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-16pldmfw: Select CRC32 when PLDMFW is selectedSimon Horman1-0/+1
pldmfw calls crc32 code and depends on it being enabled, else there is a link error as follows. So PLDMFW should select CRC32. lib/pldmfw/pldmfw.o: In function `pldmfw_flash_image': pldmfw.c:(.text+0x70f): undefined reference to `crc32_le_base' This problem was introduced by commit b8265621f488 ("Add pldmfw library for PLDM firmware update"). It manifests as of commit d69ea414c9b4 ("ice: implement device flash update via devlink"). And is more likely to occur as of commit 9ad19171b6d6 ("lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'"). Found by chance while exercising builds based on tinyconfig. Fixes: b8265621f488 ("Add pldmfw library for PLDM firmware update") Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250613-pldmfw-crc32-v1-1-f3fad109eee6@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12ionic: Prevent driver/fw getting out of sync on devcmd(s)Brett Creeley1-1/+2
Some stress/negative firmware testing around devcmd(s) returning EAGAIN found that the done bit could get out of sync in the firmware when it wasn't cleared in a retry case. While here, change the type of the local done variable to a bool to match the return type from ionic_dev_cmd_done(). Fixes: ec8ee714736e ("ionic: stretch heartbeat detection") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250609212827.53842-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS contextGal Pressman1-1/+58
Add test_rss_default_context_rule() to verify that ntuple rules can correctly direct traffic to the default RSS context (context 0). The test creates two ntuple rules with explicit location priorities: - A high-priority rule (loc 0) directing specific port traffic to context 0. - A low-priority rule (loc 1) directing all other TCP traffic to context 1. This validates that: 1. Rules targeting the default context function properly. 2. Traffic steering works as expected when mixing default and additional RSS contexts. The test was written by AI, and reviewed by humans. Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net: ethtool: Don't check if RSS context exists in case of context 0Gal Pressman1-1/+2
Context 0 (default context) always exists, there is no need to check whether it exists or not when adding a flow steering rule. The existing check fails when creating a flow steering rule for context 0 as it is not stored in the rss_ctx xarray. For example: $ ethtool --config-ntuple eth2 flow-type tcp4 dst-ip 194.237.147.23 dst-port 19983 context 0 loc 618 rmgr: Cannot insert RX class rule: Invalid argument Cannot insert classification rule An example usecase for this could be: - A high-priority rule (loc 0) directing specific port traffic to context 0. - A low-priority rule (loc 1) directing all other TCP traffic to context 1. This is a user-visible regression that was caught in our testing environment, it was not reported by a user yet. Fixes: de7f7582dff2 ("net: ethtool: prevent flow steering to RSS contexts which don't exist") Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20250612071958.1696361-2-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.Kuniyuki Iwashima1-1/+2
Before the cited commit, the kernel unconditionally embedded SCM credentials to skb for embryo sockets even when both the sender and listener disabled SO_PASSCRED and SO_PASSPIDFD. Now, the credentials are added to skb only when configured by the sender or the listener. However, as reported in the link below, it caused a regression for some programs that assume credentials are included in every skb, but sometimes not now. The only problematic scenario would be that a socket starts listening before setting the option. Then, there will be 2 types of non-small race window, where a client can send skb without credentials, which the peer receives as an "invalid" message (and aborts the connection it seems ?): Client Server ------ ------ s1.listen() <-- No SO_PASS{CRED,PIDFD} s2.connect() s2.send() <-- w/o cred s1.setsockopt(SO_PASS{CRED,PIDFD}) s2.send() <-- w/ cred or Client Server ------ ------ s1.listen() <-- No SO_PASS{CRED,PIDFD} s2.connect() s2.send() <-- w/o cred s3, _ = s1.accept() <-- Inherit cred options s2.send() <-- w/o cred but not set yet s3.setsockopt(SO_PASS{CRED,PIDFD}) s2.send() <-- w/ cred It's unfortunate that buggy programs depend on the behaviour, but let's restore the previous behaviour. Fixes: 3f84d577b79d ("af_unix: Inherit sk_flags at connect().") Reported-by: Jacek Łuczak <difrost.kernel@gmail.com> Closes: https://lore.kernel.org/all/68d38b0b-1666-4974-85d4-15575789c8d4@gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Tested-by: Christian Heusel <christian@heusel.eu> Tested-by: André Almeida <andrealmeid@igalia.com> Tested-by: Jacek Łuczak <difrost.kernel@gmail.com> Link: https://patch.msgid.link/20250611202758.3075858-1-kuni1840@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12ipv6: Move fib6_config_validate() to ip6_route_add().Kuniyuki Iwashima1-55/+55
syzkaller created an IPv6 route from a malformed packet, which has a prefix len > 128, triggering the splat below. [0] This is a similar issue fixed by commit 586ceac9acb7 ("ipv6: Restore fib6_config validation for SIOCADDRT."). The cited commit removed fib6_config validation from some callers of ip6_add_route(). Let's move the validation back to ip6_route_add() and ip6_route_multipath_add(). [0]: UBSAN: array-index-out-of-bounds in ./include/net/ipv6.h:616:34 index 20 is out of range for type '__u8 [16]' CPU: 1 UID: 0 PID: 7444 Comm: syz.0.708 Not tainted 6.16.0-rc1-syzkaller-g19272b37aa4f #0 PREEMPT Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff80078a80>] dump_backtrace+0x2e/0x3c arch/riscv/kernel/stacktrace.c:132 [<ffffffff8000327a>] show_stack+0x30/0x3c arch/riscv/kernel/stacktrace.c:138 [<ffffffff80061012>] __dump_stack lib/dump_stack.c:94 [inline] [<ffffffff80061012>] dump_stack_lvl+0x12e/0x1a6 lib/dump_stack.c:120 [<ffffffff800610a6>] dump_stack+0x1c/0x24 lib/dump_stack.c:129 [<ffffffff8001c0ea>] ubsan_epilogue+0x14/0x46 lib/ubsan.c:233 [<ffffffff819ba290>] __ubsan_handle_out_of_bounds+0xf6/0xf8 lib/ubsan.c:455 [<ffffffff85b363a4>] ipv6_addr_prefix include/net/ipv6.h:616 [inline] [<ffffffff85b363a4>] ip6_route_info_create+0x8f8/0x96e net/ipv6/route.c:3793 [<ffffffff85b635da>] ip6_route_add+0x2a/0x1aa net/ipv6/route.c:3889 [<ffffffff85b02e08>] addrconf_prefix_route+0x2c4/0x4e8 net/ipv6/addrconf.c:2487 [<ffffffff85b23bb2>] addrconf_prefix_rcv+0x1720/0x1e62 net/ipv6/addrconf.c:2878 [<ffffffff85b92664>] ndisc_router_discovery+0x1a06/0x3504 net/ipv6/ndisc.c:1570 [<ffffffff85b99038>] ndisc_rcv+0x500/0x600 net/ipv6/ndisc.c:1874 [<ffffffff85bc2c18>] icmpv6_rcv+0x145e/0x1e0a net/ipv6/icmp.c:988 [<ffffffff85af6798>] ip6_protocol_deliver_rcu+0x18a/0x1976 net/ipv6/ip6_input.c:436 [<ffffffff85af8078>] ip6_input_finish+0xf4/0x174 net/ipv6/ip6_input.c:480 [<ffffffff85af8262>] NF_HOOK include/linux/netfilter.h:317 [inline] [<ffffffff85af8262>] NF_HOOK include/linux/netfilter.h:311 [inline] [<ffffffff85af8262>] ip6_input+0x16a/0x70c net/ipv6/ip6_input.c:491 [<ffffffff85af8dcc>] ip6_mc_input+0x5c8/0x1268 net/ipv6/ip6_input.c:588 [<ffffffff85af6112>] dst_input include/net/dst.h:469 [inline] [<ffffffff85af6112>] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] [<ffffffff85af6112>] NF_HOOK include/linux/netfilter.h:317 [inline] [<ffffffff85af6112>] NF_HOOK include/linux/netfilter.h:311 [inline] [<ffffffff85af6112>] ipv6_rcv+0x5ae/0x6e0 net/ipv6/ip6_input.c:309 [<ffffffff85087e84>] __netif_receive_skb_one_core+0x106/0x16e net/core/dev.c:5977 [<ffffffff85088104>] __netif_receive_skb+0x2c/0x144 net/core/dev.c:6090 [<ffffffff850883c6>] netif_receive_skb_internal net/core/dev.c:6176 [inline] [<ffffffff850883c6>] netif_receive_skb+0x1aa/0xbf2 net/core/dev.c:6235 [<ffffffff8328656e>] tun_rx_batched.isra.0+0x430/0x686 drivers/net/tun.c:1485 [<ffffffff8329ed3a>] tun_get_user+0x2952/0x3d6c drivers/net/tun.c:1938 [<ffffffff832a21e0>] tun_chr_write_iter+0xc4/0x21c drivers/net/tun.c:1984 [<ffffffff80b9b9ae>] new_sync_write fs/read_write.c:593 [inline] [<ffffffff80b9b9ae>] vfs_write+0x56c/0xa9a fs/read_write.c:686 [<ffffffff80b9c2be>] ksys_write+0x126/0x228 fs/read_write.c:738 [<ffffffff80b9c42e>] __do_sys_write fs/read_write.c:749 [inline] [<ffffffff80b9c42e>] __se_sys_write fs/read_write.c:746 [inline] [<ffffffff80b9c42e>] __riscv_sys_write+0x6e/0x94 fs/read_write.c:746 [<ffffffff80076912>] syscall_handler+0x94/0x118 arch/riscv/include/asm/syscall.h:112 [<ffffffff8637e31e>] do_trap_ecall_u+0x396/0x530 arch/riscv/kernel/traps.c:341 [<ffffffff863a69e2>] handle_exception+0x146/0x152 arch/riscv/kernel/entry.S:197 Fixes: fa76c1674f2e ("ipv6: Move some validation from ip6_route_info_create() to rtm_to_fib6_config().") Reported-by: syzbot+4c2358694722d304c44e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6849b8c3.a00a0220.1eb5f5.00f0.GAE@google.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250611193551.2999991-1-kuni1840@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net: drv: netdevsim: don't napi_complete() from netpollJakub Kicinski1-1/+2
netdevsim supports netpoll. Make sure we don't call napi_complete() from it, since it may not be scheduled. Breno reports hitting a warning in napi_complete_done(): WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560 __napi_poll+0x2d8/0x3a0 handle_softirqs+0x1fe/0x710 This is presumably after netpoll stole the SCHED bit prematurely. Reported-by: Breno Leitao <leitao@debian.org> Fixes: 3762ec05a9fb ("netdevsim: add NAPI support") Tested-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250611174643.2769263-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()Dan Carpenter1-2/+17
Check for if ida_alloc() or rhashtable_lookup_get_insert_fast() fails. Fixes: 17e0accac577 ("net/mlx5: HWS, support complex matchers") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Link: https://patch.msgid.link/aEmBONjyiF6z5yCV@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12veth: prevent NULL pointer dereference in veth_xdp_rcvJesper Dangaard Brouer1-2/+2
The veth peer device is RCU protected, but when the peer device gets deleted (veth_dellink) then the pointer is assigned NULL (via RCU_INIT_POINTER). This patch adds a necessary NULL check in veth_xdp_rcv when accessing the veth peer net_device. This fixes a bug introduced in commit dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops"). The bug is a race and only triggers when having inflight packets on a veth that is being deleted. Reported-by: Ihor Solodrai <ihor.solodrai@linux.dev> Closes: https://lore.kernel.org/all/fecfcad0-7a16-42b8-bff2-66ee83a6e5c4@linux.dev/ Reported-by: syzbot+c4c7bf27f6b0c4bd97fe@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/683da55e.a00a0220.d8eae.0052.GAE@google.com/ Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops") Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org> Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev> Link: https://patch.msgid.link/174964557873.519608.10855046105237280978.stgit@firesoul Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net_sched: remove qdisc_tree_flush_backlog()Eric Dumazet1-8/+0
This function is no longer used after the four prior fixes. Given all prior uses were wrong, it seems better to remove it. Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250611111515.1983366-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net_sched: ets: fix a race in ets_qdisc_change()Eric Dumazet1-1/+1
Gerrard Tai reported a race condition in ETS, whenever SFQ perturb timer fires at the wrong time. The race is as follows: CPU 0 CPU 1 [1]: lock root [2]: qdisc_tree_flush_backlog() [3]: unlock root | | [5]: lock root | [6]: rehash | [7]: qdisc_tree_reduce_backlog() | [4]: qdisc_put() This can be abused to underflow a parent's qlen. Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog() should fix the race, because all packets will be purged from the qdisc before releasing the lock. Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250611111515.1983366-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net_sched: tbf: fix a race in tbf_change()Eric Dumazet1-1/+1
Gerrard Tai reported a race condition in TBF, whenever SFQ perturb timer fires at the wrong time. The race is as follows: CPU 0 CPU 1 [1]: lock root [2]: qdisc_tree_flush_backlog() [3]: unlock root | | [5]: lock root | [6]: rehash | [7]: qdisc_tree_reduce_backlog() | [4]: qdisc_put() This can be abused to underflow a parent's qlen. Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog() should fix the race, because all packets will be purged from the qdisc before releasing the lock. Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://patch.msgid.link/20250611111515.1983366-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net_sched: red: fix a race in __red_change()Eric Dumazet1-1/+1
Gerrard Tai reported a race condition in RED, whenever SFQ perturb timer fires at the wrong time. The race is as follows: CPU 0 CPU 1 [1]: lock root [2]: qdisc_tree_flush_backlog() [3]: unlock root | | [5]: lock root | [6]: rehash | [7]: qdisc_tree_reduce_backlog() | [4]: qdisc_put() This can be abused to underflow a parent's qlen. Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog() should fix the race, because all packets will be purged from the qdisc before releasing the lock. Fixes: 0c8d13ac9607 ("net: sched: red: delay destroying child qdisc on replace") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250611111515.1983366-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net_sched: prio: fix a race in prio_tune()Eric Dumazet1-1/+1
Gerrard Tai reported a race condition in PRIO, whenever SFQ perturb timer fires at the wrong time. The race is as follows: CPU 0 CPU 1 [1]: lock root [2]: qdisc_tree_flush_backlog() [3]: unlock root | | [5]: lock root | [6]: rehash | [7]: qdisc_tree_reduce_backlog() | [4]: qdisc_put() This can be abused to underflow a parent's qlen. Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog() should fix the race, because all packets will be purged from the qdisc before releasing the lock. Fixes: 7b8e0b6e6599 ("net: sched: prio: delay destroying child qdiscs on change") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250611111515.1983366-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net_sched: sch_sfq: reject invalid perturb periodEric Dumazet1-2/+8
Gerrard Tai reported that SFQ perturb_period has no range check yet, and this can be used to trigger a race condition fixed in a separate patch. We want to make sure ctl->perturb_period * HZ will not overflow and is positive. Tested: tc qd add dev lo root sfq perturb -10 # negative value : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 1000000000 # too big : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 2000000 # acceptable value tc -s -d qd sh dev lo qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250611083501.1810459-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net: phy: phy_caps: Don't skip better duplex macth on non-exact matchMaxime Chevallier1-6/+12
When performing a non-exact phy_caps lookup, we are looking for a supported mode that matches as closely as possible the passed speed/duplex. Blamed patch broke that logic by returning a match too early in case the caller asks for half-duplex, as a full-duplex linkmode may match first, and returned as a non-exact match without even trying to mach on half-duplex modes. Reported-by: Jijie Shao <shaojijie@huawei.com> Closes: https://lore.kernel.org/netdev/20250603102500.4ec743cf@fedora/T/#m22ed60ca635c67dc7d9cbb47e8995b2beb5c1576 Tested-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Fixes: fc81e257d19f ("net: phy: phy_caps: Allow looking-up link caps based on speed and duplex") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250606094321.483602-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11MAINTAINERS: Update Kuniyuki Iwashima's email address.Kuniyuki Iwashima2-3/+6
I left Amazon and joined Google, so let's map the email addresses accordingly. Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250610235734.88540-1-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11selftests: net: add test case for NAT46 looping back dstJakub Kicinski2-0/+16
Simple test for crash involving multicast loopback and stale dst. Reuse exising NAT46 program. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250610001245.1981782-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.