| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In bvec_split_segs(), max_bytes is an unsigned, so it must be less than
or equal to UINT_MAX. Remove the unnecessary min().
Prior to commit 67927d220150 ("block/merge: count bytes instead of
sectors"), the min() was with UINT_MAX >> 9, so it did have an effect.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250214193637.234702-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix several issues in partition probing:
- The bailout for a bad partoffset must use put_dev_sector(), since the
preceding read_part_sector() succeeded.
- If the partition table claims a silly sector size like 0xfff bytes
(which results in partition table entries straddling sector boundaries),
bail out instead of accessing out-of-bounds memory.
- We must not assume that the partition table contains proper NUL
termination - use strnlen() and strncmp() instead of strlen() and
strcmp().
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20250214-partition-mac-v1-1-c1c626dffbd5@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The conditions for whether or not a request is allowed adding to a
completion batch are a bit hard to read, and they also have a few
issues. One is that ioerror may indeed be a random value on passthrough,
and it's being checked unconditionally of whether or not the given
request is a passthrough request or not.
Rewrite the conditions to be separate for easier reading, and only check
ioerror for non-passthrough requests. This fixes an issue with bio
unmapping on passthrough, where it fails getting added to a batch. This
both leads to suboptimal performance, and may trigger a potential
schedule-under-atomic condition for polled passthrough IO.
Fixes: f794f3351f26 ("block: add support for blk_mq_end_request_batch()")
Link: https://lore.kernel.org/r/20575f0a-656e-4bb3-9d82-dec6c7e3a35c@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
My sparc64 defconfig build failed like this:
drivers/block/sunvdc.c: In function 'vdc_queue_drain':
drivers/block/sunvdc.c:1130:9: error: too many arguments to function 'blk_mq_unquiesce_queue'
1130 | blk_mq_unquiesce_queue(q, memflags);
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/block/sunvdc.c:10:
include/linux/blk-mq.h:895:6: note: declared here
895 | void blk_mq_unquiesce_queue(struct request_queue *q);
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/block/sunvdc.c:1131:9: error: too few arguments to function 'blk_mq_unfreeze_queue'
1131 | blk_mq_unfreeze_queue(q);
| ^~~~~~~~~~~~~~~~~~~~~
In file included from drivers/block/sunvdc.c:10:
include/linux/blk-mq.h:914:1: note: declared here
914 | blk_mq_unfreeze_queue(struct request_queue *q, unsigned int memflags)
| ^~~~~~~~~~~~~~~~~~~~~
Fixes: 1e1a9cecfab3 ("block: force noio scope in blk_mq_freeze_queue")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_limits_cancel_update() must only be called if
queue_limits_start_update() is called first. Remove the
queue_limits_cancel_update() call from linear_set_limits() because
there is no corresponding queue_limits_start_update() call.
This bug was discovered by annotating all mutex operations with clang
thread-safety attributes and by building the kernel with clang and
-Wthread-safety.
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Coly Li <colyli@kernel.org>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 127186cfb184 ("md: reintroduce md-linear")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250129225636.2667932-1-bvanassche@acm.org
Signed-off-by: Song Liu <song@kernel.org>
|
|
Do not access the state variable directly, instead use proper
synchronization so not stale data is read.
Fixes: e6e7f7ac03e4 ("nvme: ensure reset state check ordering")
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
To suppress the compiler "warning: symbol 'nvme_tls_attrs_group' was not
declared. Should it be static?"
Fixes: 1e48b34c9bc79a ("nvme: split off TLS sysfs attributes into a separate group")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When block drivers or the core block code perform allocations with a
frozen queue, this could try to recurse into the block device to
reclaim memory and deadlock. Thus all allocations done by a process
that froze a queue need to be done without __GFP_IO and __GFP_FS.
Instead of tying to track all of them down, force a noio scope as
part of freezing the queue.
Note that nvme is a bit of a mess here due to the non-owner freezes,
and they will be addressed separately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250131120352.1315351-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The nr_hw_queue update could potentially race with disk addtion/removal
while registering/unregistering hctx sysfs files. The __blk_mq_update_
nr_hw_queues() runs with q->tag_list_lock held and so to avoid it racing
with disk addition/removal we should acquire q->tag_list_lock while
registering/unregistering hctx sysfs files.
With this patch, blk_mq_sysfs_register() (called during disk addition)
and blk_mq_sysfs_unregister() (called during disk removal) now runs
with q->tag_list_lock held so that it avoids racing with __blk_mq_update
_nr_hw_queues().
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250128143436.874357-3-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The request queue uses ->sysfs_dir_lock for protecting the addition/
deletion of kobject entries under sysfs while we register/unregister
blk-mq. However kobject addition/deletion is already protected with
kernfs/sysfs internal synchronization primitives. So use of q->sysfs_
dir_lock seems redundant.
Moreover, q->sysfs_dir_lock is also used at few other callsites along
with q->sysfs_lock for protecting the addition/deletion of kojects.
One such example is when we register with sysfs a set of independent
access ranges for a disk. Here as well we could get rid off q->sysfs_
dir_lock and only use q->sysfs_lock.
The only variable which q->sysfs_dir_lock appears to protect is q->
mq_sysfs_init_done which is set/unset while registering/unregistering
blk-mq with sysfs. But use of q->mq_sysfs_init_done could be easily
replaced using queue registered bit QUEUE_FLAG_REGISTERED.
So with this patch we remove q->sysfs_dir_lock from each callsite
and replace q->mq_sysfs_init_done using QUEUE_FLAG_REGISTERED.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250128143436.874357-2-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The kato field is little endian on the wire, but native endian in
the in-core structure, add the missing byte swap.
Fixes: 6202783184bf ("nvmet: Improve nvmet_alloc_ctrl() interface and implementation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
So use the __le32 type for it.
Fixes: 6202783184bf ("nvmet: Improve nvmet_alloc_ctrl() interface and implementation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
LOOP_SET_STATUS{,64} can set a lot more flags than it is supposed to
clear (the LOOP_SET_STATUS_CLEARABLE_FLAGS vs
LOOP_SET_STATUS_SETTABLE_FLAGS defines should have been a hint..).
Fix this by only clearing the bits in LOOP_SET_STATUS_CLEARABLE_FLAGS.
Fixes: ae074d07a0e5 ("loop: move updating lo_flag s out of loop_set_status_from_info")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250127143045.538279-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into struct
md_bitmap_stats"), following panic is reported:
Oops: general protection fault, probably for non-canonical address
RIP: 0010:bitmap_get_stats+0x2b/0xa0
Call Trace:
<TASK>
md_seq_show+0x2d2/0x5b0
seq_read_iter+0x2b9/0x470
seq_read+0x12f/0x180
proc_reg_read+0x57/0xb0
vfs_read+0xf6/0x380
ksys_read+0x6c/0xf0
do_syscall_64+0x82/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Root cause is that bitmap_get_stats() can be called at anytime if mddev
is still there, even if bitmap is destroyed, or not fully initialized.
Deferenceing bitmap in this case can crash the kernel. Meanwhile, the
above commit start to deferencing bitmap->storage, make the problem
easier to trigger.
Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex.
Cc: stable@vger.kernel.org # v6.12+
Fixes: 32a7627cf3a3 ("[PATCH] md: optimised resync using Bitmap based intent logging")
Reported-and-tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Closes: https://lore.kernel.org/linux-raid/ca3a91a2-50ae-4f68-b317-abd9889f3907@oracle.com/T/#m6e5086c95201135e4941fe38f9efa76daf9666c5
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250124092055.4050195-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
Simply free an allocated buffer once we copied its content
to the request sgl.
kmemleak complaint:
unreferenced object 0xffff8cd40c388000 (size 4096):
comm "kworker/2:2H", pid 14739, jiffies 4401313113
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
[<ffffffff9e01087a>] kmemleak_alloc+0x4a/0x90
[<ffffffff9d30324a>] __kmalloc_cache_noprof+0x35a/0x420
[<ffffffffc180b0e2>] nvmet_execute_identify+0x912/0x9f0 [nvmet]
[<ffffffffc181a72c>] nvmet_tcp_try_recv_pdu+0x84c/0xc90 [nvmet_tcp]
[<ffffffffc181ac02>] nvmet_tcp_io_work+0x82/0x8b0 [nvmet_tcp]
[<ffffffff9cfa7158>] process_one_work+0x178/0x3e0
[<ffffffff9cfa8e9c>] worker_thread+0x2ec/0x420
[<ffffffff9cfb2140>] kthread+0xf0/0x120
[<ffffffff9cee36a4>] ret_from_fork+0x44/0x70
[<ffffffff9ce7fdda>] ret_from_fork_asm+0x1a/0x30
Fixes: 84909f7decbd ("nvmet: use kzalloc instead of ZERO_PAGE in nvme_execute_identify_ns_nvm()")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When a connectivity loss occurs while nvme_fc_create_assocation is
being executed, it's possible that the ctrl ends up stuck in the LIVE
state:
1) nvme nvme10: NVME-FC{10}: create association : ...
2) nvme nvme10: NVME-FC{10}: controller connectivity lost.
Awaiting Reconnect
nvme nvme10: queue_size 128 > ctrl maxcmd 32, reducing to maxcmd
3) nvme nvme10: Could not set queue count (880)
nvme nvme10: Failed to configure AEN (cfg 900)
4) nvme nvme10: NVME-FC{10}: controller connect complete
5) nvme nvme10: failed nvme_keep_alive_end_io error=4
A connection attempt starts 1) and the ctrl is in state CONNECTING.
Shortly after the LLDD driver detects a connection lost event and calls
nvme_fc_ctrl_connectivity_loss 2). Because we are still in CONNECTING
state, this event is ignored.
nvme_fc_create_association continues to run in parallel and tries to
communicate with the controller and these commands will fail. Though
these errors are filtered out, e.g in 3) setting the I/O queues numbers
fails which leads to an early exit in nvme_fc_create_io_queues. Because
the number of IO queues is 0 at this point, there is nothing left in
nvme_fc_create_association which could detected the connection drop.
Thus the ctrl enters LIVE state 4).
Eventually the keep alive handler times out 5) but because nothing is
being done, the ctrl stays in LIVE state.
There is already the ASSOC_FAILED flag to track connectivity loss event
but this bit is set too late in the recovery code path. Move this into
the connectivity loss event handler and synchronize it with the state
change. This ensures that the ASSOC_FAILED flag is seen by
nvme_fc_create_io_queues and it does not enter the LIVE state after a
connectivity loss event. If the connectivity loss event happens after we
entered the LIVE state the normal error recovery path is executed.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When the set feature attempts fails with any NVME status code set in
nvme_set_queue_count, the function still report success. Though the
numbers of queues set to 0. This is done to support controllers in
degraded state (the admin queue is still up and running but no IO
queues).
Though there is an exception. When nvme_set_features reports an host
path error, nvme_set_queue_count should propagate this error as the
connectivity is lost, which means also the admin queue is not working
anymore.
Fixes: 9a0be7abb62f ("nvme: refactor set_queue_count")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The initial controller initialization mimiks the reconnect loop
behavior by switching from NEW to RESETTING and then to CONNECTING.
The transition from NEW to CONNECTING is a valid transition, so there is
no point entering the RESETTING state. TCP and RDMA also transition
directly to CONNECTING state.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The fallback code in blk_mq_map_hw_queues is original from
blk_mq_pci_map_queues and was added to handle the case where
pci_irq_get_affinity will return NULL for !SMP configuration.
blk_mq_map_hw_queues replaces besides blk_mq_pci_map_queues also
blk_mq_virtio_map_queues which used to use blk_mq_map_queues for the
fallback.
It's possible to use blk_mq_map_queues for both cases though.
blk_mq_map_queues creates the same map as blk_mq_clear_mq_map for !SMP
that is CPU 0 will be mapped to hctx 0.
The WARN_ON_ONCE has to be dropped for virtio as the fallback is also
taken for certain configuration on default. Though there is still a
WARN_ON_ONCE check in lib/group_cpus.c:
WARN_ON(nr_present + nr_others < numgrps);
which will trigger if the caller tries to create more hardware queues
than CPUs. It tests the same as the WARN_ON_ONCE in
blk_mq_pci_map_queues did.
Fixes: a5665c3d150c ("virtio: blk/scsi: replace blk_mq_virtio_map_queues with blk_mq_map_hw_queues")
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Closes: https://lore.kernel.org/all/20250122093020.6e8a4e5b@gandalf.local.home/
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20250123-fix-blk_mq_map_hw_queues-v1-1-08dbd01f2c39@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkdev_read_iter() has a few odd checks, like gating the position and
count adjustment on whether or not the result is bigger-than-or-equal to
zero (where bigger than makes more sense), and not checking the return
value of blkdev_direct_IO() before doing an iov_iter_revert(). The
latter can lead to attempting to revert with a negative value, which
when passed to iov_iter_revert() as an unsigned value will lead to
throwing a WARN_ON() because unroll is bigger than MAX_RW_COUNT.
Be sane and don't revert for -EIOCBQUEUED, like what is done in other
spots.
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the 'cachestat()' system call was added in commit cf264e1329fb
("cachestat: implement cachestat syscall"), it was meant to be a much
more convenient (and performant) version of mincore() that didn't need
mapping things into the user virtual address space in order to work.
But it ended up missing the "check for writability or ownership" fix for
mincore(), done in commit 134fca9063ad ("mm/mincore.c: make mincore()
more conservative").
This just adds equivalent logic to 'cachestat()', modified for the file
context (rather than vma).
Reported-by: Sudheendra Raghav Neela <sneela@tugraz.at>
Fixes: cf264e1329fb ("cachestat: implement cachestat syscall")
Tested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Old email still works, and will indefinitely, but I'm switching to a new
one.
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
A logic inversion in rseq_reset_rseq_cpu_node_id() causes the rseq
unregistration to fail when rseq_validate_ro_fields() succeeds rather
than the opposite.
This affects both CONFIG_DEBUG_RSEQ=y and CONFIG_DEBUG_RSEQ=n.
Fixes: 7d5265ffcd8b ("rseq: Validate read-only fields under DEBUG_RSEQ config")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250116205956.836074-1-mathieu.desnoyers@efficios.com
|
|
When enabling a pass-through port an interrupt might come before psmouse
driver binds to the pass-through port. However synaptics sub-driver
tries to access psmouse instance presumably associated with the
pass-through port to figure out if only 1 byte of response or entire
protocol packet needs to be forwarded to the pass-through port and may
crash if psmouse instance has not been attached to the port yet.
Fix the crash by introducing open() and close() methods for the port and
check if the port is open before trying to access psmouse instance.
Because psmouse calls serio_open() only after attaching psmouse instance
to serio port instance this prevents the potential crash.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: 100e16959c3c ("Input: libps2 - attach ps2dev instances as serio port's drvdata")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1219522
Cc: stable@vger.kernel.org
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/Z4qSHORvPn7EU2j1@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Microsoft defined Meta+Shift+F23 as the Copilot shortcut instead of a
dedicated keycode, and multiple vendors have their keyboards emit this
sequence in response to users pressing a dedicated "Copilot" key.
Unfortunately the default keymap table in atkbd does not map scancode
0x6e (F23) and so the key combination does not work even if userspace
is ready to handle it.
Because this behavior is common between multiple vendors and the
scancode is currently unused map 0x6e to keycode 193 (KEY_F23) so that
key sequence is generated properly.
MS documentation for the scan code:
https://learn.microsoft.com/en-us/windows/win32/inputdev/about-keyboard-input#scan-codes
Confirmed on Lenovo, HP and Dell machines by Canonical.
Tested on Lenovo T14s G6 AMD.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250107034554.25843-1-mpearson-lenovo@squebb.ca
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In case of possible unpredictably large arguments passed to
rose_setsockopt() and multiplied by extra values on top of that,
integer overflows may occur.
Do the safest minimum and fix these issues by checking the
contents of 'opt' and returning -EINVAL if they are too large. Also,
switch to unsigned int and remove useless check for negative 'opt'
in ROSE_IDLE case.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250115164220.19954-1-n.zhandarovich@fintech.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some PHYs don't support clause 45 access, and return -EOPNOTSUPP from
phy_modify_mmd(), which causes phylink_bringup_phy() to fail. Prevent
this failure by allowing -EOPNOTSUPP to also mean success.
Reported-by: Jiawen Wu <jiawenwu@trustnetic.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1tZp1a-001V62-DT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce am65_cpsw_create_txqs() and am65_cpsw_destroy_txqs()
and use them.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250117-am65-cpsw-streamline-v2-3-91a29c97e569@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce am65_cpsw_create_rxqs() and am65_cpsw_destroy_rxqs()
and use them.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250117-am65-cpsw-streamline-v2-2-91a29c97e569@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are missing netif_napi_del() and am65_cpsw_nuss_free_tx/rx_chns()
in error path when am65_cpsw_nuss_init_tx/rx_chns() is used anywhere
other than at probe(). i.e. am65_cpsw_nuss_update_tx_rx_chns and
am65_cpsw_nuss_resume()
As reported, in am65_cpsw_nuss_update_tx_rx_chns(),
if am65_cpsw_nuss_init_tx_chns() partially fails then
devm_add_action(dev, am65_cpsw_nuss_free_tx_chns,..) is added
but the cleanup via am65_cpsw_nuss_free_tx_chns() will not run.
Same issue exists for am65_cpsw_nuss_init_tx/rx_chns() failures
in am65_cpsw_nuss_resume() as well.
This would otherwise require more instances of devm_add/remove_action
and is clearly more of a distraction than any benefit.
So, drop devm_add/remove_action for am65_cpsw_nuss_free_tx/rx_chns()
and call am65_cpsw_nuss_free_tx/rx_chns() and netif_napi_del()
where required.
Reported-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Closes: https://lore.kernel.org/all/m4rhkzcr7dlylxr54udyt6lal5s2q4krrvmyay6gzgzhcu4q2c@r34snfumzqxy/
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250117-am65-cpsw-streamline-v2-1-91a29c97e569@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let's register inet6_rtm_deladdr() with RTNL_FLAG_DOIT_PERNET and
hold rtnl_net_lock() before inet6_addr_del().
Now that inet6_addr_del() is always called under per-netns RTNL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-12-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let's register inet6_rtm_newaddr() with RTNL_FLAG_DOIT_PERNET
and hold rtnl_net_lock() before __dev_get_by_index().
Now that inet6_addr_add() and inet6_addr_modify() are always
called under per-netns RTNL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-11-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet6_addr_add() and inet6_addr_modify() have the same code to validate
IPv6 lifetime that is done under RTNL.
Let's factorise it out to inet6_rtm_newaddr() so that we can validate
the lifetime without RTNL later.
Note that inet6_addr_add() is called from addrconf_add_ifaddr(), but the
lifetime is INFINITY_LIFE_TIME in the path, so expires and flags are 0.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-10-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will convert inet6_rtm_newaddr() to per-netns RTNL.
Except for IFA_F_OPTIMISTIC, cfg.ifa_flags can be set before
__dev_get_by_index().
Let's move ifa_flags setup before __dev_get_by_index() so that
we can set ifa_flags without RTNL.
Also, now it's moved before tb[IFA_CACHEINFO] in preparing for
the next patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet6_addr_add() is called from inet6_rtm_newaddr() and
addrconf_add_ifaddr().
inet6_addr_add() looks up dev by __dev_get_by_index(), but
it's already done in inet6_rtm_newaddr().
Let's move the 2nd lookup to addrconf_add_ifaddr() and pass
dev to inet6_addr_add().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These functions are called from inet6_ioctl() with a socket's netns
and hold RTNL.
* SIOCSIFADDR : addrconf_add_ifaddr()
* SIOCDIFADDR : addrconf_del_ifaddr()
* SIOCSIFDSTADDR : addrconf_set_dstaddr()
Let's use rtnl_net_lock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
addrconf_init() holds RTNL for blackhole_netdev, which is the global
device in init_net.
addrconf_cleanup() holds RTNL to clean up devices in init_net too.
Let's use rtnl_net_lock(&init_net) there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
addrconf_dad_work() is per-address work and holds RTNL internally.
We can fetch netns as dev_net(ifp->idev->dev).
Let's use rtnl_net_lock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
addrconf_verify_work() is per-netns work to call addrconf_verify_rtnl()
under RTNL.
Let's use rtnl_net_lock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net.ipv6.conf.${DEV}.XXX sysctl are changed under RTNL:
* forwarding
* ignore_routes_with_linkdown
* disable_ipv6
* proxy_ndp
* addr_gen_mode
* stable_secret
* disable_policy
Let's use rtnl_net_lock() there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will convert rtnl_lock() with rtnl_net_lock(), and we want to
convert __in6_dev_get() too.
__in6_dev_get() uses rcu_dereference_rtnl(), but as written in its
comment, rtnl_dereference() or rcu_dereference() is preferable.
Let's add __in6_dev_get_rtnl_net() that uses rtnl_net_dereference().
We can add the RCU version helper later if needed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit df542f669307 ("net: stmmac: Switch to zero-copy in
non-XDP RX path"), SKBs are always marked for recycle, it is redundant
to mark SKBs more than once when new frags are appended.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20250117062805.192393-1-0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two different models of usb card, the drivers are r8152 and asix. If no
network cable is connected, Speed = 10Mb/s. This problem is repeated in
linux 3.10, 4.19, 5.4, 6.12. This problem also exists on the latest
kernel. Both drivers call mii_ethtool_get_link_ksettings,
but the value of cmd->base.speed in this
function can only be SPEED_1000 or SPEED_100 or SPEED_10.
When the network cable is not connected, set cmd->base.speed
=SPEED_UNKNOWN.
Signed-off-by: Xiangqian Zhang <zhangxiangqian@kylinos.cn>
Link: https://patch.msgid.link/20250117094603.4192594-1-zhangxiangqian@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since dccp and llc makefiles already check sysctl code
compilation with xxx-$(CONFIG_SYSCTL)
we can drop the checks
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Link: https://patch.msgid.link/20250119134254.19250-1-kirjanov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
300-400B RPC requests are fairly common. With the current default
of 256B HDS threshold bnxt ends up splitting those, lowering PCIe
bandwidth efficiency and increasing the number of memory allocation.
Increase the HDS threshold to fit 4 buffers in a 4k page.
This works out to 640B as the threshold on a typical kernel confing.
This change increases the performance for a microbenchmark which
receives 400B RPCs and sends empty responses by 4.5%.
Admittedly this is just a single benchmark, but 256B works out to
just 6 (so 2 more) packets per head page, because shinfo size
dominates the headers.
Now that we use page pool for the header pages I was also tempted
to default rx_copybreak to 0, but in synthetic testing the copybreak
size doesn't seem to make much difference.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we can configure HDS threshold separately from the rx_copybreak
HDS threshold may be higher than rx_copybreak.
We need to make sure that we have enough space for the headers.
Fixes: 6b43673a25c3 ("bnxt_en: add support for hds-thresh ethtool command")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The core has the current HDS config, it can pre-populate the values
for the drivers. While at it, remove the zero-setting in netdevsim.
Zero are the default values since the config is zalloc'ed.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the pending config for hds_thrs. Core will only update the "current"
one after we return success. Without this change 2 reconfigs would be
required for the setting to reach the device.
Fixes: 6b43673a25c3 ("bnxt_en: add support for hds-thresh ethtool command")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Record the pending configuration in net_device struct.
ethtool core duplicates the current config and the specific
handlers (for now just ringparam) can modify it.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For ease of review of the next patch store the dev pointer
on the stack, instead of referring to req_info.dev every time.
No functional changes.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Caleb Sander Mateos
Jann Horn
Jens Axboe
Stephen Rothwell
Bart Van Assche
Daniel Wagner
Keith Busch
Christoph Hellwig
Nilay Shroff
Yu Kuai
Sagi Grimberg
Linus Torvalds
Corey Minyard
Mathieu Desnoyers
Dmitry Torokhov
Mark Pearson
Nikita Zhandarovich
Russell King (Oracle)
Roger Quadros
Kuniyuki Iwashima
Furong Xu
Xiangqian Zhang
Denis Kirjanov
Jakub Kicinski