| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Nexthops whose link is down are not supposed to be considered during
path selection when the "ignore_routes_with_linkdown" sysctl is set.
This is done by assigning them a negative region boundary.
However, when comparing the computed hash (unsigned) with the region
boundary (signed), the negative region boundary is treated as unsigned,
resulting in incorrect nexthop selection.
Fix by treating the computed hash as signed. Note that the computed hash
is always in range of [0, 2^31 - 1].
Fixes: 3d709f69a3e7 ("ipv6: Use hash-threshold instead of modulo-N")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250402114224.293392-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cited commit transitioned IPv6 path selection to use hash-threshold
instead of modulo-N. With hash-threshold, each nexthop is assigned a
region boundary in the multipath hash function's output space and a
nexthop is chosen if the calculated hash is smaller than the nexthop's
region boundary.
Hash-threshold does not work correctly if path selection does not start
with the first nexthop. For example, if fib6_select_path() is always
passed the last nexthop in the group, then it will always be chosen
because its region boundary covers the entire hash function's output
space.
Fix this by starting the selection process from the first nexthop and do
not consider nexthops for which rt6_score_route() provided a negative
score.
Fixes: 3d709f69a3e7 ("ipv6: Use hash-threshold instead of modulo-N")
Reported-by: Stanislav Fomichev <stfomichev@gmail.com>
Closes: https://lore.kernel.org/netdev/Z9RIyKZDNoka53EO@mini-arch/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250402114224.293392-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Missing usbnet_going_away Check in Critical Path.
The usb_submit_urb function lacks a usbnet_going_away
validation, whereas __usbnet_queue_skb includes this check.
This inconsistency creates a race condition where:
A URB request may succeed, but the corresponding SKB data
fails to be queued.
Subsequent processes:
(e.g., rx_complete → defer_bh → __skb_unlink(skb, list))
attempt to access skb->next, triggering a NULL pointer
dereference (Kernel Panic).
Fixes: 04e906839a05 ("usbnet: fix cyclical race on disconnect with work queue")
Cc: stable@vger.kernel.org
Signed-off-by: Ying Lu <luying1@xiaomi.com>
Link: https://patch.msgid.link/4c9ef2efaa07eb7f9a5042b74348a67e5a3a7aea.1743584159.git.luying1@xiaomi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the current implementation octeontx2 manages XDP_ABORTED and XDP
invalid as XDP_PASS forwarding the skb to the networking stack.
Align the behaviour to other XDP drivers handling XDP_ABORTED and XDP
invalid as XDP_DROP.
Please note this patch has just compile tested.
Fixes: 06059a1a9a4a5 ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250401-octeontx2-xdp-abort-fix-v1-1-f0587c35a0b9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct geneve_opt uses 5 bit length for each single option, which
means every vary size option should be smaller than 128 bytes.
However, all current related Netlink policies cannot promise this
length condition and the attacker can exploit a exact 128-byte size
option to *fake* a zero length option and confuse the parsing logic,
further achieve heap out-of-bounds read.
One example crash log is like below:
[ 3.905425] ==================================================================
[ 3.905925] BUG: KASAN: slab-out-of-bounds in nla_put+0xa9/0xe0
[ 3.906255] Read of size 124 at addr ffff888005f291cc by task poc/177
[ 3.906646]
[ 3.906775] CPU: 0 PID: 177 Comm: poc-oob-read Not tainted 6.1.132 #1
[ 3.907131] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 3.907784] Call Trace:
[ 3.907925] <TASK>
[ 3.908048] dump_stack_lvl+0x44/0x5c
[ 3.908258] print_report+0x184/0x4be
[ 3.909151] kasan_report+0xc5/0x100
[ 3.909539] kasan_check_range+0xf3/0x1a0
[ 3.909794] memcpy+0x1f/0x60
[ 3.909968] nla_put+0xa9/0xe0
[ 3.910147] tunnel_key_dump+0x945/0xba0
[ 3.911536] tcf_action_dump_1+0x1c1/0x340
[ 3.912436] tcf_action_dump+0x101/0x180
[ 3.912689] tcf_exts_dump+0x164/0x1e0
[ 3.912905] fw_dump+0x18b/0x2d0
[ 3.913483] tcf_fill_node+0x2ee/0x460
[ 3.914778] tfilter_notify+0xf4/0x180
[ 3.915208] tc_new_tfilter+0xd51/0x10d0
[ 3.918615] rtnetlink_rcv_msg+0x4a2/0x560
[ 3.919118] netlink_rcv_skb+0xcd/0x200
[ 3.919787] netlink_unicast+0x395/0x530
[ 3.921032] netlink_sendmsg+0x3d0/0x6d0
[ 3.921987] __sock_sendmsg+0x99/0xa0
[ 3.922220] __sys_sendto+0x1b7/0x240
[ 3.922682] __x64_sys_sendto+0x72/0x90
[ 3.922906] do_syscall_64+0x5e/0x90
[ 3.923814] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 3.924122] RIP: 0033:0x7e83eab84407
[ 3.924331] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf
[ 3.925330] RSP: 002b:00007ffff505e370 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
[ 3.925752] RAX: ffffffffffffffda RBX: 00007e83eaafa740 RCX: 00007e83eab84407
[ 3.926173] RDX: 00000000000001a8 RSI: 00007ffff505e3c0 RDI: 0000000000000003
[ 3.926587] RBP: 00007ffff505f460 R08: 00007e83eace1000 R09: 000000000000000c
[ 3.926977] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffff505f3c0
[ 3.927367] R13: 00007ffff505f5c8 R14: 00007e83ead1b000 R15: 00005d4fbbe6dcb8
Fix these issues by enforing correct length condition in related
policies.
Fixes: 925d844696d9 ("netfilter: nft_tunnel: add support for geneve opts")
Fixes: 4ece47787077 ("lwtunnel: add options setting and dumping for geneve")
Fixes: 0ed5269f9e41 ("net/sched: add tunnel option support to act_tunnel_key")
Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250402165632.6958-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix io_uring zero copy rx selftest with updated netdev Python helpers.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250402172414.895276-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netdevsim has extra register_netdevice_notifier_dev_net notifiers,
use netdevim instead of dummy device to test them out.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-9-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We don't have a consistent state yet, but document where we think
we are and where we wanna be.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-8-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Even though dummy device doesn't really need an instance lock,
a lot of selftests use dummy so it's useful to have extra
expose to the instance lock on NIPA. Request the instance/ops
locking.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-7-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to exercise and verify notifiers' locking assumptions,
register dummy notifiers (via register_netdevice_notifier_dev_net).
Share notifier event handler that enforces the assumptions with
lock_debug.c (rename and export rtnl_net_debug_event as
netdev_debug_event). Add ops lock asserts to netdev_debug_event.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
And make it selected by CONFIG_DEBUG_NET. Don't rename any of
the structs/functions. Next patch will use rtnl_net_debug_event in
netdevsim.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-5-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipv6_add_dev might call dev_disable_lro which unconditionally grabs
instance lock, so it will deadlock during NETDEV_REGISTER. Switch
to netif_disable_lro.
Make sure all callers hold the instance lock as well.
Cc: Cosmin Ratiu <cratiu@nvidia.com>
Fixes: ad7c7b2172c3 ("net: hold netdev instance lock during sysfs operations")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Callers of inetdev_init can come from several places with inconsistent
expectation about netdev instance lock. Grab instance lock during
REGISTER (plus UP). Also solve the inconsistency with UNREGISTER
where it was locked only during move netns path.
WARNING: CPU: 10 PID: 1479 at ./include/net/netdev_lock.h:54
__netdev_update_features+0x65f/0xca0
__warn+0x81/0x180
__netdev_update_features+0x65f/0xca0
report_bug+0x156/0x180
handle_bug+0x4f/0x90
exc_invalid_op+0x13/0x60
asm_exc_invalid_op+0x16/0x20
__netdev_update_features+0x65f/0xca0
netif_disable_lro+0x30/0x1d0
inetdev_init+0x12f/0x1f0
inetdev_event+0x48b/0x870
notifier_call_chain+0x38/0xf0
register_netdevice+0x741/0x8b0
register_netdev+0x1f/0x40
mlx5e_probe+0x4e3/0x8e0 [mlx5_core]
auxiliary_bus_probe+0x3f/0x90
really_probe+0xc3/0x3a0
__driver_probe_device+0x80/0x150
driver_probe_device+0x1f/0x90
__device_attach_driver+0x7d/0x100
bus_for_each_drv+0x80/0xd0
__device_attach+0xb4/0x1c0
bus_probe_device+0x91/0xa0
device_add+0x657/0x870
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Cosmin Ratiu <cratiu@nvidia.com>
Fixes: ad7c7b2172c3 ("net: hold netdev instance lock during sysfs operations")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cosmin reports the following deadlock:
dump_stack_lvl+0x62/0x90
print_deadlock_bug+0x274/0x3b0
__lock_acquire+0x1229/0x2470
lock_acquire+0xb7/0x2b0
__mutex_lock+0xa6/0xd20
dev_disable_lro+0x20/0x80
inetdev_init+0x12f/0x1f0
inetdev_event+0x48b/0x870
notifier_call_chain+0x38/0xf0
netif_change_net_namespace+0x72e/0x9f0
do_setlink.isra.0+0xd5/0x1220
rtnl_newlink+0x7ea/0xb50
rtnetlink_rcv_msg+0x459/0x5e0
netlink_rcv_skb+0x54/0x100
netlink_unicast+0x193/0x270
netlink_sendmsg+0x204/0x450
Switch to netif_disable_lro which assumes the caller holds the instance
lock. inetdev_init is called for blackhole device (which sw device and
doesn't grab instance lock) and from REGISTER/UNREGISTER notifiers.
We already hold the instance lock for REGISTER notifier during
netns change and we'll soon hold the lock during other paths.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Cosmin Ratiu <cratiu@nvidia.com>
Fixes: ad7c7b2172c3 ("net: hold netdev instance lock during sysfs operations")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Dev pointer in airoha_ppe_foe_entry_prepare routine is not strictly
a device allocated by airoha_eth driver since it is an egress device
and the flowtable can contain even wlan, pppoe or vlan devices. E.g:
flowtable ft {
hook ingress priority filter
devices = { eth1, lan1, lan2, lan3, lan4, wlan0 }
flags offload ^
|
"not allocated by airoha_eth" --
}
In this case airoha_get_dsa_port() will just return the original device
pointer and we can't assume netdev priv pointer points to an
airoha_gdm_port struct.
Fix the issue validating egress gdm port in airoha_ppe_foe_entry_prepare
routine before accessing net_device priv pointer.
Fixes: 00a7678310fe ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250401-airoha-validate-egress-gdm-port-v4-1-c7315d33ce10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mv88e6xxx has an internal PPU that polls PHY state. If we want to
access the internal PHYs, we need to disable the PPU first. Because
that is a slow operation, a 10ms timer is used to re-enable it,
canceled with every access, so bulk operations effectively only
disable it once and re-enable it some 10ms after the last access.
If a PHY is accessed and then the mv88e6xxx module is removed before
the 10ms are up, the PPU re-enable ends up accessing a dangling pointer.
This especially affects probing during bootup. The MDIO bus and PHY
registration may succeed, but registration with the DSA framework
may fail later on (e.g. because the CPU port depends on another,
very slow device that isn't done probing yet, returning -EPROBE_DEFER).
In this case, probe() fails, but the MDIO subsystem may already have
accessed the MIDO bus or PHYs, arming the timer.
This is fixed as follows:
- If probe fails after mv88e6xxx_phy_init(), make sure we also call
mv88e6xxx_phy_destroy() before returning
- In mv88e6xxx_remove(), make sure we do the teardown in the correct
order, calling mv88e6xxx_phy_destroy() after unregistering the
switch device.
- In mv88e6xxx_phy_destroy(), destroy both the timer and the work item
that the timer might schedule, synchronously waiting in case one of
the callbacks already fired and destroying the timer first, before
waiting for the work item.
- Access to the PPU is guarded by a mutex, the worker acquires it
with a mutex_trylock(), not proceeding with the expensive shutdown
if that fails. We grab the mutex in mv88e6xxx_phy_destroy() to make
sure the slow PPU shutdown is already done or won't even enter, when
we wait for the work item.
Fixes: 2e5f032095ff ("dsa: add support for the Marvell 88E6131 switch chip")
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250401135705.92760-1-david.oberhollenzer@sigma-star.at
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update Loic Poulain's email address to @oss.qualcomm.com.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250401145344.10669-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using RTEXT_FILTER_SKIP_STATS is incorrectly skipping non-stats IPv6
netlink attributes on link dump. This causes issues on userspace tools,
e.g iproute2 is not rendering address generation mode as it should due
to missing netlink attribute.
Move the filling of IFLA_INET6_STATS and IFLA_INET6_ICMP6STATS to a
helper function guarded by a flag check to avoid hitting the same
situation in the future.
Fixes: d5566fd72ec1 ("rtnetlink: RTEXT_FILTER_SKIP_STATS support to avoid dumping inet/inet6 stats")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402121751.3108-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When queue is being reset, callbacks of mgmt_ops are called by
netdev_nl_bind_rx_doit().
The netdev_nl_bind_rx_doit() first acquires netdev_lock() and then calls
callbacks.
So, mgmt_ops callbacks should not acquire netdev_lock() internaly.
The bnxt_queue_{start | stop}() calls napi_{enable | disable}() but they
internally acquire netdev_lock().
So, deadlock occurs.
To avoid deadlock, napi_{enable | disable}_locked() should be used
instead.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Fixes: cae03e5bdd9e ("net: hold netdev instance lock during queue operations")
Link: https://patch.msgid.link/20250402133123.840173-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
self-connect-ipv6 got slightly flaky on netdev:
> # timeout set to 120
> # selftests: net/tcp_ao: self-connect_ipv6
> # 1..5
> # # 708[lib/setup.c:250] rand seed 1742872572
> # TAP version 13
> # # 708[lib/proc.c:213] Snmp6 Ip6OutNoRoutes: 0 => 1
> # not ok 1 # error 708[self-connect.c:70] failed to connect()
> # ok 2 No unexpected trace events during the test run
> # # Planned tests != run tests (5 != 2)
> # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:1
> ok 1 selftests: net/tcp_ao: self-connect_ipv6
I can not reproduce it on my machines, but judging by "Ip6OutNoRoutes"
there is no route to the local_addr (::1).
Looking at the kernel code, I see that kernel does add link-local
address automatically in init_loopback(), but that is called from
ipv6 notifier block. So, in turn the userspace that brought up
the loopback interface may see rtnetlink ACK earlier than
addrconf_notify() does it's job (at least, on a slow VM such as netdev).
Probably, for ipv4 it's the same, judging by inetdev_event().
The fix is quite simple: set the link-local route straight after
bringing the loopback interface. That will make it synchronous.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250402-tcp-ao-selfconnect-flake-v1-1-8388d629ef3d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since cited commit, ef100_probe_main() and hence also
ef100_check_design_params() run before efx->net_dev is created;
consequently, we cannot netif_set_tso_max_size() or _segs() at this
point.
Move those netif calls to ef100_probe_netdev(), and also replace
netif_err within the design params code with pci_err.
Reported-by: Kyungwook Boo <bookyungwook@gmail.com>
Fixes: 98ff4c7c8ac7 ("sfc: Separate netdev probe/remove from PCI probe/remove")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250401225439.2401047-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the tx tail is less than the head (in cases of wraparound), the TX
consumed descriptor statistic in DQ will be reported as
UINT32_MAX - head + tail, which is incorrect. Mask the difference of
head and tail according to the ring size when reporting the statistic.
Cc: stable@vger.kernel.org
Fixes: 2c9198356d56 ("gve: Add consumed counts to ethtool stats")
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402001037.2717315-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When handling multiple NFTA_TUNNEL_KEY_OPTS_GENEVE attributes, the
parsing logic should place every geneve_opt structure one by one
compactly. Hence, when deciding the next geneve_opt position, the
pointer addition should be in units of char *.
However, the current implementation erroneously does type conversion
before the addition, which will lead to heap out-of-bounds write.
[ 6.989857] ==================================================================
[ 6.990293] BUG: KASAN: slab-out-of-bounds in nft_tunnel_obj_init+0x977/0xa70
[ 6.990725] Write of size 124 at addr ffff888005f18974 by task poc/178
[ 6.991162]
[ 6.991259] CPU: 0 PID: 178 Comm: poc-oob-write Not tainted 6.1.132 #1
[ 6.991655] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 6.992281] Call Trace:
[ 6.992423] <TASK>
[ 6.992586] dump_stack_lvl+0x44/0x5c
[ 6.992801] print_report+0x184/0x4be
[ 6.993790] kasan_report+0xc5/0x100
[ 6.994252] kasan_check_range+0xf3/0x1a0
[ 6.994486] memcpy+0x38/0x60
[ 6.994692] nft_tunnel_obj_init+0x977/0xa70
[ 6.995677] nft_obj_init+0x10c/0x1b0
[ 6.995891] nf_tables_newobj+0x585/0x950
[ 6.996922] nfnetlink_rcv_batch+0xdf9/0x1020
[ 6.998997] nfnetlink_rcv+0x1df/0x220
[ 6.999537] netlink_unicast+0x395/0x530
[ 7.000771] netlink_sendmsg+0x3d0/0x6d0
[ 7.001462] __sock_sendmsg+0x99/0xa0
[ 7.001707] ____sys_sendmsg+0x409/0x450
[ 7.002391] ___sys_sendmsg+0xfd/0x170
[ 7.003145] __sys_sendmsg+0xea/0x170
[ 7.004359] do_syscall_64+0x5e/0x90
[ 7.005817] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 7.006127] RIP: 0033:0x7ec756d4e407
[ 7.006339] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf
[ 7.007364] RSP: 002b:00007ffed5d46760 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 7.007827] RAX: ffffffffffffffda RBX: 00007ec756cc4740 RCX: 00007ec756d4e407
[ 7.008223] RDX: 0000000000000000 RSI: 00007ffed5d467f0 RDI: 0000000000000003
[ 7.008620] RBP: 00007ffed5d468a0 R08: 0000000000000000 R09: 0000000000000000
[ 7.009039] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[ 7.009429] R13: 00007ffed5d478b0 R14: 00007ec756ee5000 R15: 00005cbd4e655cb8
Fix this bug with correct pointer addition and conversion in parse
and dump code.
Fixes: 925d844696d9 ("netfilter: nft_tunnel: add support for geneve opts")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Upstream fix ac888d58869b ("net: do not delay dst_entries_add() in
dst_release()") moved decrementing the dst count from dst_destroy to
dst_release to avoid accessing already freed data in case of netns
dismantle. However in case CONFIG_DST_CACHE is enabled and OvS+tunnels
are used, this fix is incomplete as the same issue will be seen for
cached dsts:
Unable to handle kernel paging request at virtual address ffff5aabf6b5c000
Call trace:
percpu_counter_add_batch+0x3c/0x160 (P)
dst_release+0xec/0x108
dst_cache_destroy+0x68/0xd8
dst_destroy+0x13c/0x168
dst_destroy_rcu+0x1c/0xb0
rcu_do_batch+0x18c/0x7d0
rcu_core+0x174/0x378
rcu_core_si+0x18/0x30
Fix this by invalidating the cache, and thus decrementing cached dst
counters, in dst_release too.
Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250326173634.31096-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Because skb_tunnel_check_pmtu() doesn't handle PACKET_HOST packets,
commit 30a92c9e3d6b ("openvswitch: Set the skbuff pkt_type for proper
pmtud support.") forced skb->pkt_type to PACKET_OUTGOING for
openvswitch packets that are sent using the OVS_ACTION_ATTR_OUTPUT
action. This allowed such packets to invoke the
iptunnel_pmtud_check_icmp() or iptunnel_pmtud_check_icmpv6() helpers
and thus trigger PMTU update on the input device.
However, this also broke other parts of PMTU discovery. Since these
packets don't have the PACKET_HOST type anymore, they won't trigger the
sending of ICMP Fragmentation Needed or Packet Too Big messages to
remote hosts when oversized (see the skb_in->pkt_type condition in
__icmp_send() for example).
These two skb->pkt_type checks are therefore incompatible as one
requires skb->pkt_type to be PACKET_HOST, while the other requires it
to be anything but PACKET_HOST.
It makes sense to not trigger ICMP messages for non-PACKET_HOST packets
as these messages should be generated only for incoming l2-unicast
packets. However there doesn't seem to be any reason for
skb_tunnel_check_pmtu() to ignore PACKET_HOST packets.
Allow both cases to work by allowing skb_tunnel_check_pmtu() to work on
PACKET_HOST packets and not overriding skb->pkt_type in openvswitch
anymore.
Fixes: 30a92c9e3d6b ("openvswitch: Set the skbuff pkt_type for proper pmtud support.")
Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Tested-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/eac941652b86fddf8909df9b3bf0d97bc9444793.1743208264.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a peer attempts to establish a connection, vsock_connect() contains
a loop that waits for the state to be TCP_ESTABLISHED. However, the
other peer can be fast enough to accept the connection and close it
immediately, thus moving the state to TCP_CLOSING.
When this happens, the peer in the vsock_connect() is properly woken up,
but since the state is not TCP_ESTABLISHED, it goes back to sleep
until the timeout expires, returning -ETIMEDOUT.
If the socket state is TCP_CLOSING, waiting for the timeout is pointless.
vsock_connect() can return immediately without errors or delay since the
connection actually happened. The socket will be in a closing state,
but this is not an issue, and subsequent calls will fail as expected.
We discovered this issue while developing a test that accepts and
immediately closes connections to stress the transport switch between
two connect() calls, where the first one was interrupted by a signal
(see Closes link).
Reported-by: Luigi Leonardi <leonardi@redhat.com>
Closes: https://lore.kernel.org/virtualization/bq6hxrolno2vmtqwcvb5bljfpb7mvwb3kohrvaed6auz5vxrfv@ijmd2f3grobn/
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20250328141528.420719-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matt Dowling reported a weird UDP memory usage issue.
Under normal operation, the UDP memory usage reported in /proc/net/sockstat
remains close to zero. However, it occasionally spiked to 524,288 pages
and never dropped. Moreover, the value doubled when the application was
terminated. Finally, it caused intermittent packet drops.
We can reproduce the issue with the script below [0]:
1. /proc/net/sockstat reports 0 pages
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 1 mem 0
2. Run the script till the report reaches 524,288
# python3 test.py & sleep 5
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 3 mem 524288 <-- (INT_MAX + 1) >> PAGE_SHIFT
3. Kill the socket and confirm the number never drops
# pkill python3 && sleep 5
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 1 mem 524288
4. (necessary since v6.0) Trigger proto_memory_pcpu_drain()
# python3 test.py & sleep 1 && pkill python3
5. The number doubles
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 1 mem 1048577
The application set INT_MAX to SO_RCVBUF, which triggered an integer
overflow in udp_rmem_release().
When a socket is close()d, udp_destruct_common() purges its receive
queue and sums up skb->truesize in the queue. This total is calculated
and stored in a local unsigned integer variable.
The total size is then passed to udp_rmem_release() to adjust memory
accounting. However, because the function takes a signed integer
argument, the total size can wrap around, causing an overflow.
Then, the released amount is calculated as follows:
1) Add size to sk->sk_forward_alloc.
2) Round down sk->sk_forward_alloc to the nearest lower multiple of
PAGE_SIZE and assign it to amount.
3) Subtract amount from sk->sk_forward_alloc.
4) Pass amount >> PAGE_SHIFT to __sk_mem_reduce_allocated().
When the issue occurred, the total in udp_destruct_common() was 2147484480
(INT_MAX + 833), which was cast to -2147482816 in udp_rmem_release().
At 1) sk->sk_forward_alloc is changed from 3264 to -2147479552, and
2) sets -2147479552 to amount. 3) reverts the wraparound, so we don't
see a warning in inet_sock_destruct(). However, udp_memory_allocated
ends up doubling at 4).
Since commit 3cd3399dd7a8 ("net: implement per-cpu reserves for
memory_allocated"), memory usage no longer doubles immediately after
a socket is close()d because __sk_mem_reduce_allocated() caches the
amount in udp_memory_per_cpu_fw_alloc. However, the next time a UDP
socket receives a packet, the subtraction takes effect, causing UDP
memory usage to double.
This issue makes further memory allocation fail once the socket's
sk->sk_rmem_alloc exceeds net.ipv4.udp_rmem_min, resulting in packet
drops.
To prevent this issue, let's use unsigned int for the calculation and
call sk_forward_alloc_add() only once for the small delta.
Note that first_packet_length() also potentially has the same problem.
[0]:
from socket import *
SO_RCVBUFFORCE = 33
INT_MAX = (2 ** 31) - 1
s = socket(AF_INET, SOCK_DGRAM)
s.bind(('', 0))
s.setsockopt(SOL_SOCKET, SO_RCVBUFFORCE, INT_MAX)
c = socket(AF_INET, SOCK_DGRAM)
c.connect(s.getsockname())
data = b'a' * 100
while True:
c.send(data)
Fixes: f970bd9e3a06 ("udp: implement memory accounting helpers")
Reported-by: Matt Dowling <madowlin@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250401184501.67377-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__udp_enqueue_schedule_skb() has the following condition:
if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf)
goto drop;
sk->sk_rcvbuf is initialised by net.core.rmem_default and later can
be configured by SO_RCVBUF, which is limited by net.core.rmem_max,
or SO_RCVBUFFORCE.
If we set INT_MAX to sk->sk_rcvbuf, the condition is always false
as sk->sk_rmem_alloc is also signed int.
Then, the size of the incoming skb is added to sk->sk_rmem_alloc
unconditionally.
This results in integer overflow (possibly multiple times) on
sk->sk_rmem_alloc and allows a single socket to have skb up to
net.core.udp_mem[1].
For example, if we set a large value to udp_mem[1] and INT_MAX to
sk->sk_rcvbuf and flood packets to the socket, we can see multiple
overflows:
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 3 mem 7956736 <-- (7956736 << 12) bytes > INT_MAX * 15
^- PAGE_SHIFT
# ss -uam
State Recv-Q ...
UNCONN -1757018048 ... <-- flipping the sign repeatedly
skmem:(r2537949248,rb2147483646,t0,tb212992,f1984,w0,o0,bl0,d0)
Previously, we had a boundary check for INT_MAX, which was removed by
commit 6a1f12dd85a8 ("udp: relax atomic operation on sk->sk_rmem_alloc").
A complete fix would be to revert it and cap the right operand by
INT_MAX:
rmem = atomic_add_return(size, &sk->sk_rmem_alloc);
if (rmem > min(size + (unsigned int)sk->sk_rcvbuf, INT_MAX))
goto uncharge_drop;
but we do not want to add the expensive atomic_add_return() back just
for the corner case.
Casting rmem to unsigned int prevents multiple wraparounds, but we still
allow a single wraparound.
# cat /proc/net/sockstat | grep UDP:
UDP: inuse 3 mem 524288 <-- (INT_MAX + 1) >> 12
# ss -uam
State Recv-Q ...
UNCONN -2147482816 ... <-- INT_MAX + 831 bytes
skmem:(r2147484480,rb2147483646,t0,tb212992,f3264,w0,o0,bl0,d14468947)
So, let's define rmem and rcvbuf as unsigned int and check skb->truesize
only when rcvbuf is large enough to lower the overflow possibility.
Note that we still have a small chance to see overflow if multiple skbs
to the same socket are processed on different core at the same time and
each size does not exceed the limit but the total size does.
Note also that we must ignore skb->truesize for a small buffer as
explained in commit 363dc73acacb ("udp: be less conservative with
sock rmem accounting").
Fixes: 6a1f12dd85a8 ("udp: relax atomic operation on sk->sk_rmem_alloc")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250401184501.67377-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rtnl_net_debug_init() registers rtnl_net_debug_net_ops by
register_pernet_device() but calls unregister_pernet_subsys()
in case register_netdevice_notifier() fails.
It corrupts pernet_list because first_device is updated in
register_pernet_device() but not unregister_pernet_subsys().
Let's fix it by calling register_pernet_subsys() instead.
The _subsys() one fits better for the use case because it keeps
the notifier alive until default_device_exit_net(), giving it
more chance to test NETDEV_UNREGISTER.
Fixes: 03fa53485659 ("rtnetlink: Add ASSERT_RTNL_NET() placeholder for netdev notifier.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250401190716.70437-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In iproute 6.14, the nat ip mask logic was fixed to remove an undefined
behaviour[1]. So now instead of reporting '0.0.0.0/32' on x86 and potentially
'0.0.0.0/0' in other platforms, it reports '0.0.0.0/0' in all platforms.
[1] https://lore.kernel.org/netdev/20250306112520.188728-1-torben.nielsen@prevas.dk/
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://patch.msgid.link/20250401144908.568140-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Protect the parser TCAM/SRAM memory, and the cached (shadow) SRAM
information, from concurrent modifications.
Both the TCAM and SRAM tables are indirectly accessed by configuring
an index register that selects the row to read or write to. This means
that operations must be atomic in order to, e.g., avoid spreading
writes across multiple rows. Since the shadow SRAM array is used to
find free rows in the hardware table, it must also be protected in
order to avoid TOCTOU errors where multiple cores allocate the same
row.
This issue was detected in a situation where `mvpp2_set_rx_mode()` ran
concurrently on two CPUs. In this particular case the
MVPP2_PE_MAC_UC_PROMISCUOUS entry was corrupted, causing the
classifier unit to drop all incoming unicast - indicated by the
`rx_classifier_drops` counter.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250401065855.3113635-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With commit 8533b14b3d65 ("eth: mlx4: create a page pool for Rx") mlx4
started using functions guarded by PAGE_POOL. This change introduced
build errors when CONFIG_MLX4_EN is set but CONFIG_PAGE_POOL is not:
ld: vmlinux.o: in function `mlx4_en_alloc_frags':
en_rx.c:(.text+0xa5eaf9): undefined reference to `page_pool_alloc_pages'
ld: vmlinux.o: in function `mlx4_en_create_rx_ring':
(.text+0xa5ee91): undefined reference to `page_pool_create'
Make MLX4_EN select PAGE_POOL to fix the ml;x4 build errors.
Fixes: 8533b14b3d65 ("eth: mlx4: create a page pool for Rx")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250401015315.2306092-1-gthelen@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pravin has not been active for a while, missingmaints reports:
Subsystem OPENVSWITCH
Changes 138 / 253 (54%)
(No activity)
Top reviewers:
[41]: aconole@redhat.com
[31]: horms@kernel.org
[23]: echaudro@redhat.com
[8]: fw@strlen.de
[6]: i.maximets@ovn.org
INACTIVE MAINTAINER Pravin B Shelar <pshelar@ovn.org>
Let's elevate Aaron, Eelco and Ilya to the status of maintainers.
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250401001520.2080231-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller points out that create_link path doesn't grab ops lock,
add it.
Reported-by: syzbot+08936936fe8132f91f1a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/67e6b3e8.050a0220.2f068f.0079.GAE@google.com/
Fixes: 97246d6d21c2 ("net: hold netdev instance lock during ndo_bpf")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250331142814.1887506-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ETS Qdisc schedules SP bands in a priority order assigning band-0 the
highest priority (band-0 > band-1 > .. > band-n) while EN7581 arranges
SP bands in a priority order assigning band-7 the highest priority
(band-7 > band-6, .. > band-n).
Fix priomap check in airoha_qdma_set_tx_ets_sched routine in order to
align ETS Qdisc and airoha_eth driver SP priority ordering.
Fixes: b56e4d660a96 ("net: airoha: Enforce ETS Qdisc priomap")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20250331-airoha-ets-validate-priomap-v1-1-60a524488672@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the following kernel warning deleting HTB offloaded leafs and/or root
HTB qdisc in airoha_eth driver properly reporting qid in
airoha_tc_get_htb_get_leaf_queue routine.
$tc qdisc replace dev eth1 root handle 10: htb offload
$tc class add dev eth1 arent 10: classid 10:4 htb rate 100mbit ceil 100mbit
$tc qdisc replace dev eth1 parent 10:4 handle 4: ets bands 8 \
quanta 1514 3028 4542 6056 7570 9084 10598 12112
$tc qdisc del dev eth1 root
[ 55.827864] ------------[ cut here ]------------
[ 55.832493] WARNING: CPU: 3 PID: 2678 at 0xffffffc0798695a4
[ 55.956510] CPU: 3 PID: 2678 Comm: tc Tainted: G O 6.6.71 #0
[ 55.963557] Hardware name: Airoha AN7581 Evaluation Board (DT)
[ 55.969383] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 55.976344] pc : 0xffffffc0798695a4
[ 55.979851] lr : 0xffffffc079869a20
[ 55.983358] sp : ffffffc0850536a0
[ 55.986665] x29: ffffffc0850536a0 x28: 0000000000000024 x27: 0000000000000001
[ 55.993800] x26: 0000000000000000 x25: ffffff8008b19000 x24: ffffff800222e800
[ 56.000935] x23: 0000000000000001 x22: 0000000000000000 x21: ffffff8008b19000
[ 56.008071] x20: ffffff8002225800 x19: ffffff800379d000 x18: 0000000000000000
[ 56.015206] x17: ffffffbf9ea59000 x16: ffffffc080018000 x15: 0000000000000000
[ 56.022342] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000001
[ 56.029478] x11: ffffffc081471008 x10: ffffffc081575a98 x9 : 0000000000000000
[ 56.036614] x8 : ffffffc08167fd40 x7 : ffffffc08069e104 x6 : ffffff8007f86000
[ 56.043748] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000001
[ 56.050884] x2 : 0000000000000000 x1 : 0000000000000250 x0 : ffffff800222c000
[ 56.058020] Call trace:
[ 56.060459] 0xffffffc0798695a4
[ 56.063618] 0xffffffc079869a20
[ 56.066777] __qdisc_destroy+0x40/0xa0
[ 56.070528] qdisc_put+0x54/0x6c
[ 56.073748] qdisc_graft+0x41c/0x648
[ 56.077324] tc_get_qdisc+0x168/0x2f8
[ 56.080978] rtnetlink_rcv_msg+0x230/0x330
[ 56.085076] netlink_rcv_skb+0x5c/0x128
[ 56.088913] rtnetlink_rcv+0x14/0x1c
[ 56.092490] netlink_unicast+0x1e0/0x2c8
[ 56.096413] netlink_sendmsg+0x198/0x3c8
[ 56.100337] ____sys_sendmsg+0x1c4/0x274
[ 56.104261] ___sys_sendmsg+0x7c/0xc0
[ 56.107924] __sys_sendmsg+0x44/0x98
[ 56.111492] __arm64_sys_sendmsg+0x20/0x28
[ 56.115580] invoke_syscall.constprop.0+0x58/0xfc
[ 56.120285] do_el0_svc+0x3c/0xbc
[ 56.123592] el0_svc+0x18/0x4c
[ 56.126647] el0t_64_sync_handler+0x118/0x124
[ 56.131005] el0t_64_sync+0x150/0x154
[ 56.134660] ---[ end trace 0000000000000000 ]---
Fixes: ef1ca9271313b ("net: airoha: Add sched HTB offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250331-airoha-htb-qdisc-offload-del-fix-v1-1-4ea429c2c968@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We must serialize calls to sctp_udp_sock_stop() and sctp_udp_sock_start()
or risk a crash as syzbot reported:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000d: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
CPU: 1 UID: 0 PID: 6551 Comm: syz.1.44 Not tainted 6.14.0-syzkaller-g7f2ff7b62617 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
RIP: 0010:kernel_sock_shutdown+0x47/0x70 net/socket.c:3653
Call Trace:
<TASK>
udp_tunnel_sock_release+0x68/0x80 net/ipv4/udp_tunnel_core.c:181
sctp_udp_sock_stop+0x71/0x160 net/sctp/protocol.c:930
proc_sctp_do_udp_port+0x264/0x450 net/sctp/sysctl.c:553
proc_sys_call_handler+0x3d0/0x5b0 fs/proc/proc_sysctl.c:601
iter_file_splice_write+0x91c/0x1150 fs/splice.c:738
do_splice_from fs/splice.c:935 [inline]
direct_splice_actor+0x18f/0x6c0 fs/splice.c:1158
splice_direct_to_actor+0x342/0xa30 fs/splice.c:1102
do_splice_direct_actor fs/splice.c:1201 [inline]
do_splice_direct+0x174/0x240 fs/splice.c:1227
do_sendfile+0xafd/0xe50 fs/read_write.c:1368
__do_sys_sendfile64 fs/read_write.c:1429 [inline]
__se_sys_sendfile64 fs/read_write.c:1415 [inline]
__x64_sys_sendfile64+0x1d8/0x220 fs/read_write.c:1415
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
Fixes: 046c052b475e ("sctp: enable udp tunneling socks")
Reported-by: syzbot+fae49d997eb56fa7c74d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67ea5c01.050a0220.1547ec.012b.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250331091532.224982-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test case to validate the interaction between TBF and SKBPRIO queueing
disciplines, specifically targeting queue length accounting corner cases.
This test complements the fix for the queue length accounting issue in the
SKBPRIO qdisc. This is still best-effort, as timing and manipulating enqueue
and dequeue from user-space is very hard.
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250329222536.696204-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the current implementation, skbprio enqueue/dequeue contains an assertion
that fails under certain conditions when SKBPRIO is used as a child qdisc under
TBF with specific parameters. The failure occurs because TBF sometimes peeks at
packets in the child qdisc without actually dequeuing them when tokens are
unavailable.
This peek operation creates a discrepancy between the parent and child qdisc
queue length counters. When TBF later receives a high-priority packet,
SKBPRIO's queue length may show a different value than what's reflected in its
internal priority queue tracking, triggering the assertion.
The fix removes this overly strict assertions in SKBPRIO, they are not
necessary at all.
Reported-by: syzbot+a3422a19b05ea96bee18@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a3422a19b05ea96bee18
Fixes: aea5f654e6b7 ("net/sched: add skbprio scheduler")
Cc: Nishanth Devarajan <ndev2021@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250329222536.696204-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When calling netlbl_conn_setattr(), addr->sa_family is used
to determine the function behavior. If sk is an IPv4 socket,
but the connect function is called with an IPv6 address,
the function calipso_sock_setattr() is triggered.
Inside this function, the following code is executed:
sk_fullsock(__sk) ? inet_sk(__sk)->pinet6 : NULL;
Since sk is an IPv4 socket, pinet6 is NULL, leading to a
null pointer dereference.
This patch fixes the issue by checking if inet6_sk(sk)
returns a NULL pointer before accessing pinet6.
Signed-off-by: Debin Zhu <mowenroot@163.com>
Signed-off-by: Bitao Ouyang <1985755126@qq.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.")
Link: https://patch.msgid.link/20250401124018.4763-1-mowenroot@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When nf_tables_updchain encounters an error, hook registration needs to
be rolled back.
This should only be done if the hook has been registered, which won't
happen when the table is flagged as dormant (inactive).
Just move the assignment into the registration block.
Reported-by: syzbot+53ed3a6440173ddbf499@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=53ed3a6440173ddbf499
Fixes: b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
conncount has its own GC handler which determines when to reap stale
elements, this is convenient for dynamic sets. However, this also reaps
non-dynamic sets with static configurations coming from control plane.
Always run connlimit gc handler but honor feedback to reap element if
this set is dynamic.
Fixes: 290180e2448c ("netfilter: nf_tables: add connlimit support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
With SRIOV enabled, idpf ends up calling into idpf_remove() twice.
First via idpf_shutdown() and then again when idpf_remove() calls into
sriov_disable(), because the VF devices use the idpf driver, hence the
same remove routine. When that happens, it is possible for the adapter
to be NULL from the first call to idpf_remove(), leading to a NULL
pointer dereference.
echo 1 > /sys/class/net/<netif>/device/sriov_numvfs
reboot
BUG: kernel NULL pointer dereference, address: 0000000000000020
...
RIP: 0010:idpf_remove+0x22/0x1f0 [idpf]
...
? idpf_remove+0x22/0x1f0 [idpf]
? idpf_remove+0x1e4/0x1f0 [idpf]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x19f/0x200
pci_stop_bus_device+0x6d/0x90
pci_stop_and_remove_bus_device+0x12/0x20
pci_iov_remove_virtfn+0xbe/0x120
sriov_disable+0x34/0xe0
idpf_sriov_configure+0x58/0x140 [idpf]
idpf_remove+0x1b9/0x1f0 [idpf]
idpf_shutdown+0x12/0x30 [idpf]
pci_device_shutdown+0x35/0x60
device_shutdown+0x156/0x200
...
Replace the direct idpf_remove() call in idpf_shutdown() with
idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform
the bulk of the cleanup, such as stopping the init task, freeing IRQs,
destroying the vports and freeing the mailbox. This avoids the calls to
sriov_disable() in addition to a small netdev cleanup, and destroying
workqueues, which don't seem to be required on shutdown.
Reported-by: Yuying Ma <yuma@redhat.com>
Fixes: e850efed5e15 ("idpf: add module register and probe functionality")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The commit 23c0e5a16bcc ("ixgbe: Add link management support for E610
device") introduced incorrect media type detection for E610 device. It
reproduces when advertised speed is modified after driver reload. Clear
the previous outdated PHY type high value.
Reproduction steps:
modprobe ixgbe
ethtool -s eth0 advertise 0x1000000000000
modprobe -r ixgbe
modprobe ixgbe
ethtool -s eth0 advertise 0x1000000000000
Result before the fix:
netlink error: link settings update failed
netlink error: Invalid argument
Result after the fix:
No output error
Fixes: 23c0e5a16bcc ("ixgbe: Add link management support for E610 device")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Starting from Meteor Lake, the Kumeran interface between the integrated
MAC and the I219 PHY works at a different frequency. This causes sporadic
MDI errors when accessing the PHY, and in rare circumstances could lead
to packet corruption.
To overcome this, introduce minor changes to the Kumeran idle
state (K1) parameters during device initialization. Hardware reset
reverts this configuration, therefore it needs to be applied in a few
places.
Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake")
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fixes TX frame drops in AF_XDP zero copy mode when budget < 4.
xsk_tx_peek_desc() consumed TX frame and it was ignored because of
low budget. Not even AF_XDP completion was done for dropped frames.
It can be reproduced on i226 by sending 100000x 60 B frames with
launch time set to minimal IPG (672 ns between starts of frames)
on 1Gbit/s. Always 1026 frames are not sent and are missing a
completion.
Fixes: 9acf59a752d4c ("igc: Enable TX via AF_XDP zero-copy")
Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com>
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In commit b65969856d4f ("igc: Link queues to NAPI instances"), the XSK
queues were incorrectly unmapped from their NAPI instances. After
discussion on the mailing list and the introduction of a test to codify
the expected behavior, we can see that the unmapping causes the
check_xsk test to fail:
NETIF=enp86s0 ./tools/testing/selftests/drivers/net/queues.py
[...]
# Check| ksft_eq(q.get('xsk', None), {},
# Check failed None != {} xsk attr on queue we configured
not ok 4 queues.check_xsk
After this commit, the test passes:
ok 4 queues.check_xsk
Note that the test itself is only in net-next, so I tested this change
by applying it to my local net-next tree, booting, and running the test.
Cc: stable@vger.kernel.org
Fixes: b65969856d4f ("igc: Link queues to NAPI instances")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix the build (htmldocs) warning:
Documentation/edac/index.rst: WARNING: document isn't included in any toctree.
Fixes: db99ea5f2c03 ("EDAC: Add support for EDAC device features control")
Closes: https://lore.kernel.org/all/20250228185102.15842f8b@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250401115823.573-1-shiju.jose@huawei.com
|
|
This reverts commit 0de2a5c4b824da2205658ebebb99a55c43cdf60f.
I forgot that a TCP socket could receive messages in its error queue.
sock_queue_err_skb() can be called without socket lock being held,
and changes sk->sk_rmem_alloc.
The fact that skbs in error queue are limited by sk->sk_rcvbuf
means that error messages can be dropped if socket receive
queues are full, which is an orthogonal issue.
In future kernels, we could use a separate sk->sk_error_mem_alloc
counter specifically for the error queue.
Fixes: 0de2a5c4b824 ("tcp: avoid atomic operations on sk->sk_rmem_alloc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250331075946.31960-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Taehee reports missing rtnl from bnxt_shutdown path:
inetdev_event (./include/linux/inetdevice.h:256 net/ipv4/devinet.c:1585)
notifier_call_chain (kernel/notifier.c:85)
__dev_close_many (net/core/dev.c:1732 (discriminator 3))
kernel/locking/mutex.c:713 kernel/locking/mutex.c:732)
dev_close_many (net/core/dev.c:1786)
netif_close (./include/linux/list.h:124 ./include/linux/list.h:215
bnxt_shutdown (drivers/net/ethernet/broadcom/bnxt/bnxt.c:16707) bnxt_en
pci_device_shutdown (drivers/pci/pci-driver.c:511)
device_shutdown (drivers/base/core.c:4820)
kernel_restart (kernel/reboot.c:271 kernel/reboot.c:285)
Bring back the rtnl lock.
Link: https://lore.kernel.org/netdev/CAMArcTV4P8PFsc6O2tSgzRno050DzafgqkLA2b7t=Fv_SY=brw@mail.gmail.com/
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250328174216.3513079-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Ido Schimmel
Ying Lu
Lorenzo Bianconi
Lin Ma
David Wei
Stanislav Fomichev
David Oberhollenzer
Loic Poulain
Fernando Fernandez Mancera
Taehee Yoo
Dmitry Safonov
Edward Cree
Joshua Washington
Antoine Tenart
Guillaume Nault
Stefano Garzarella
Kuniyuki Iwashima
Pedro Tammela
Tobias Waldekranz
Greg Thelen
Jakub Kicinski
Eric Dumazet
Cong Wang
Debin Zhu
Florian Westphal
Pablo Neira Ayuso
Emil Tantilov
Piotr Kwapulinski
Vitaly Lifshits
Zdenek Bouska
Joe Damato
Shiju Jose