| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit e7607f7d6d81 ("ARM: 9443/1: Require linker to support KEEP within
OVERLAY for DCE") accidentally broke the binutils version restriction
that was added in commit 0d437918fb64 ("ARM: 9414/1: Fix build issue
with LD_DEAD_CODE_DATA_ELIMINATION"), reintroducing the segmentation
fault addressed by that workaround.
Restore the binutils version dependency by using
CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY as an additional condition to ensure
that CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION is only enabled with
binutils >= 2.36 and ld.lld >= 21.0.0.
Closes: https://lore.kernel.org/6739da7d-e555-407a-b5cb-e5681da71056@landley.net/
Closes: https://lore.kernel.org/CAFERDQ0zPoya5ZQfpbeuKVZEo_fKsonLf6tJbp32QnSGAtbi+Q@mail.gmail.com/
Cc: stable@vger.kernel.org
Fixes: e7607f7d6d81 ("ARM: 9443/1: Require linker to support KEEP within OVERLAY for DCE")
Reported-by: Rob Landley <rob@landley.net>
Tested-by: Rob Landley <rob@landley.net>
Reported-by: Martin Wetterwald <martin@wetterwald.eu>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
After commit d5c8d6e0fa61 ("kbuild: Update assembler calls to use proper
flags and language target"), which updated as-instr to use the
'assembler-with-cpp' language option, the Kbuild version of as-instr
always fails internally for arch/arm with
<command-line>: fatal error: asm/unified.h: No such file or directory
compilation terminated.
because '-include' flags are now taken into account by the compiler
driver and as-instr does not have '$(LINUXINCLUDE)', so unified.h is not
found.
This went unnoticed at the time of the Kbuild change because the last
use of as-instr in Kbuild that arch/arm could reach was removed in 5.7
by commit 541ad0150ca4 ("arm: Remove 32bit KVM host support") but a
stable backport of the Kbuild change to before that point exposed this
potential issue if one were to be reintroduced.
Follow the general pattern of '-include' paths throughout the tree and
make unified.h absolute using '$(srctree)' to ensure KBUILD_AFLAGS can
be used independently.
Closes: https://lore.kernel.org/CACo-S-1qbCX4WAVFA63dWfHtrRHZBTyyr2js8Lx=Az03XHTTHg@mail.gmail.com/
Cc: stable@vger.kernel.org
Fixes: d5c8d6e0fa61 ("kbuild: Update assembler calls to use proper flags and language target")
Reported-by: KernelCI bot <bot@kernelci.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
This fixes an infinite loop when repairing "extent past end of inode",
when the extent is an older snapshot than the inode that needs repair.
Without the snaphsots_seen_add_inorder() we keep trying to delete the
same extent, even though it's no longer visible in the inode's snapshot.
Fixes: 63d6e9311999 ("bcachefs: bch2_fpunch_snapshot()")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When flushing the btree write buffer, we pull write buffer keys directly
from the journal instead of letting the journal write path copy them to
the write buffer.
When flushing from the currently open journal buffer, we have to block
new reservations and wait for outstanding reservations to complete.
Recheck the reservation state after blocking new reservations:
previously, we were checking the reservation count from before calling
__journal_block().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In file included from drivers/crypto/intel/qat/qat_common/adf_pm_dbgfs_utils.c:4:
include/linux/sprintf.h:11:54: error: unknown type name 'va_list'
11 | __printf(2, 0) int vsprintf(char *buf, const char *, va_list);
| ^~~~~~~
include/linux/sprintf.h:1:1: note: 'va_list' is defined in header '<stdarg.h>'; this is probably fixable by adding '#include <stdarg.h>'
Link: https://lkml.kernel.org/r/20250721173754.42865913@canb.auug.org.au
Fixes: 39ced19b9e60 ("lib/vsprintf: split out sprintf() and friends")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A warning is raised when __request_region() detects a conflict with a
resource whose resource.desc is IORES_DESC_DEVICE_PRIVATE_MEMORY.
But this warning is only valid for iomem_resources.
The hmem device resource uses resource.desc as the numa node id, which can
cause spurious warnings.
This warning appeared on a machine with multiple cxl memory expanders.
One of the NUMA node id is 6, which is the same as the value of
IORES_DESC_DEVICE_PRIVATE_MEMORY.
In this environment it was just a spurious warning, but when I saw the
warning I suspected a real problem so it's better to fix it.
This change fixes this by restricting the warning to only iomem_resource.
This also adds a missing new line to the warning message.
Link: https://lkml.kernel.org/r/20250719112604.25500-1-akinobu.mita@gmail.com
Fixes: 7dab174e2e27 ("dax/hmem: Move hmem device registration to dax_hmem.ko")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMOS quota goal uses 'nid' field when the metric is
DAMOS_QUOTA_NODE_MEM_{USED,FREE}_BP. But the goal commit function is not
updating the goal's nid field. Fix it.
Link: https://lkml.kernel.org/r/20250719181932.72944-1-sj@kernel.org
Fixes: 0e1c773b501f ("mm/damon/core: introduce damos quota goal metrics for memory node utilization") [6.16.x]
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When CONFIG_DEBUG_FS is off, drivers/gpu/drm/xe/xe_gt_debugfs.o
is not built and build fails on some setups with:
ld: drivers/gpu/drm/xe/xe_gt.o: in function `xe_fault_inject_gt_reset':
drivers/gpu/drm/xe/xe_gt.h:27:(.text+0x1659): undefined reference to `gt_reset_failure'
ld: drivers/gpu/drm/xe/xe_gt.h:27:(.text+0x1c16): undefined reference to `gt_reset_failure'
collect2: error: ld returned 1 exit status
Do not use the gt_reset_failure attribute if debugfs is not enabled.
Fixes: 8f3013e0b222 ("drm/xe: Introduce fault injection for gt reset")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250722-xe-fix-build-fault-v1-1-157384d50987@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4d3bbe9dd28c0a4ca119e4b8823c5f5e9cb3ff90)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The SMMU engine on HIP09 chip has a hardware issue.
SMMU pagetable prefetch features may prefetch and use a invalid PTE
even the PTE is valid at that time. This will cause the device trigger
fake pagefaults. The solution is to avoid prefetching by adding a
SYNC command when smmu mapping a iova. But the performance of nic has a
sharp drop. Then we do this workaround, always enable tx bounce buffer,
avoid mapping/unmapping on TX path.
This issue only affects HNS3, so we always enable
tx bounce buffer when smmu enabled to improve performance.
Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-5-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the queried maximum of vf channels is the maximum of channels
supported by each TC. However, the actual maximum of channels is
the maximum of channels supported by the device.
Fixes: 849e46077689 ("net: hns3: add ethtool_ops.get_channels support for VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-4-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When ptp init failed, we'd better disable the interrupt and clear the
flag, to avoid early report interrupt at next probe.
Fixes: 0bf5eb788512 ("net: hns3: add support for PTP")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-3-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The vport->req_vlan_fltr_en may be changed concurrently by function
hclge_sync_vlan_fltr_state() called in periodic work task and
function hclge_enable_vport_vlan_filter() called by user configuration.
It may cause the user configuration inoperative. Fixes it by protect
the vport->req_vlan_fltr by vport_lock.
Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-2-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The s390x ISM device data sheet clearly states that only one
request-response sequence is allowable per ISM function at any point in
time. Unfortunately as of today the s390/ism driver in Linux does not
honor that requirement. This patch aims to rectify that.
This problem was discovered based on Aliaksei's bug report which states
that for certain workloads the ISM functions end up entering error state
(with PEC 2 as seen from the logs) after a while and as a consequence
connections handled by the respective function break, and for future
connection requests the ISM device is not considered -- given it is in a
dysfunctional state. During further debugging PEC 3A was observed as
well.
A kernel message like
[ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a
is a reliable indicator of the stated function entering error state
with PEC 2. Let me also point out that a kernel message like
[ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery
is a reliable indicator that the ISM function won't be auto-recovered
because the ISM driver currently lacks support for it.
On a technical level, without this synchronization, commands (inputs to
the FW) may be partially or fully overwritten (corrupted) by another CPU
trying to issue commands on the same function. There is hard evidence that
this can lead to DMB token values being used as DMB IOVAs, leading to
PEC 2 PCI events indicating invalid DMA. But this is only one of the
failure modes imaginable. In theory even completely losing one command
and executing another one twice and then trying to interpret the outputs
as if the command we intended to execute was actually executed and not
the other one is also possible. Frankly, I don't feel confident about
providing an exhaustive list of possible consequences.
Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory")
Reported-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com>
Tested-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Tested-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722161817.1298473-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A few packets may still be sent out during the termination of iperf
processes. These late packets cause failures in rss_ctx.py when they
arrive on queues expected to be empty.
Example failure observed:
Check failed 2 != 0 traffic on inactive queues (context 1):
[0, 0, 1, 1, 386385, 397196, 0, 0, 0, 0, ...]
Check failed 4 != 0 traffic on inactive queues (context 2):
[0, 0, 0, 0, 2, 2, 247152, 253013, 0, 0, ...]
Check failed 2 != 0 traffic on inactive queues (context 3):
[0, 0, 0, 0, 0, 0, 1, 1, 282434, 283070, ...]
To avoid such failures, wait until all client sockets for the requested
port are either closed or in the TIME_WAIT state.
Fixes: 847aa551fa78 ("selftests: drv-net: rss_ctx: factor out send traffic and check")
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722122655.3194442-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Original logic only sets the return value but doesn't jump out of the
loop if the bus is kept active by a client. This is not expected. A
malicious or buggy i2c client can hang the kernel in this case and
should be avoided. This is observed during a long time test with a
PCA953x GPIO extender.
Fix it by changing the logic to not only sets the return value, but also
jumps out of the loop and return to the caller with -ETIMEDOUT.
Fixes: fbfab1ab0658 ("i2c: qup: reorganization of driver code to remove polling for qup v1")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250616-qca-i2c-v1-1-2a8d37ee0a30@outlook.com
|
|
The current implementation uses wait_for_completion(), which can cause
the caller to hang indefinitely if the transfer never completes.
Switch to wait_for_completion_interruptible() so that the operation can
be interrupted by signals.
Fixes: 84e1d0bf1d71 ("i2c: virtio: disable timeout handling")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: <stable@vger.kernel.org> # v5.16+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/b8944e9cab8eb959d888ae80add6f2a686159ba2.1751541962.git.viresh.kumar@linaro.org
|
|
The acpi_evaluate_object() returns an ACPI error code and not
Linux one. For the some platforms the err will have positive code
which may be interpreted incorrectly. Use device_reset() for
reset control which handles it correctly.
Fixes: bd2fdedbf2ba ("i2c: tegra: Add the ACPI support")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Cc: <stable@vger.kernel.org> # v5.17+
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250710131206.2316-2-akhilrajeev@nvidia.com
|
|
My CC-adding automation returned nothing on a future patch to the
include/linux/in6.h file, and I went looking for why. Add the missed
in6.h to MAINTAINERS.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722165645.work.047-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kvm_xen_schedop_poll does a kmalloc_array() when a VM polls the host
for more than one event channel potr (nr_ports > 1).
After the kmalloc_array(), the error paths need to go through the
"out" label, but the call to kvm_read_guest_virt() does not.
Fixes: 92c58965e965 ("KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly")
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Manuel Andreas <manuel.andreas@tum.de>
[Adjusted commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
A really dumb braino on rebasing and a dumber fuckup with managing #for-next
Fixes: b70cb459890b ("ufs: convert ufs to the new mount API")
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
dma_fence_wait_timeout returns a long type but the driver is
only using the lower 32 bits of the retval and discarding the
upper 32 bits.
This is particularly problematic if there are already signalled
or stub fences on some of the hw planes. In this case the
dma_fence_wait_timeout function will immediately return with
timeout value MAX_SCHEDULE_TIMEOUT (0x7fffffffffffffff) since
the fence is already signalled. If the driver only uses the lower
32 bits of this return value then it'll interpret it as an error
code (0xFFFFFFFF or (-1)) and skip the wait on the remaining fences.
This issue was first observed in the xe driver with the Android
compositor where the GPU composited layer was not properly waited
on when there were stub fences in other overlay planes resulting in
visual artifacts.
Fixes: d59cf7bb73f3c ("drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence")
Signed-off-by: Aakash Deep Sarkar <aakash.deep.sarkar@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250708074540.1948068-1-aakash.deep.sarkar@intel.com
(cherry picked from commit cdb16039515a5ac4d2c923f7a651cf19a803a3fe)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
NAND devices with different page sizes requires different number
of ECC steps, yet the qcom_spi_ecc_init_ctx_pipelined() function
sets 4 steps in 'ecc_cfg' unconditionally.
The correct number of the steps is calculated earlier in the
function already, so use that instead of the hardcoded value.
Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250723-qpic-snand-fix-steps-v1-1-d800695dde4c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure to drop the references to the accdet OF node and platform
device taken by of_parse_phandle() and of_find_device_by_node() after
looking up the sound component during probe.
Fixes: cf536e2622e2 ("ASoC: mediatek: common: Handle mediatek,accdet property")
Cc: stable@vger.kernel.org # 6.15
Cc: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20250722092542.32754-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
syzbot reported a bug in in afs_put_vlserverlist.
kAFS: bad VL server IP address
BUG: unable to handle page fault for address: fffffffffffffffa
...
Oops: Oops: 0002 [#1] SMP KASAN PTI
...
RIP: 0010:refcount_dec_and_test include/linux/refcount.h:450 [inline]
RIP: 0010:afs_put_vlserverlist+0x3a/0x220 fs/afs/vl_list.c:67
...
Call Trace:
<TASK>
afs_alloc_cell fs/afs/cell.c:218 [inline]
afs_lookup_cell+0x12a5/0x1680 fs/afs/cell.c:264
afs_cell_init+0x17a/0x380 fs/afs/cell.c:386
afs_proc_rootcell_write+0x21f/0x290 fs/afs/proc.c:247
proc_simple_write+0x114/0x1b0 fs/proc/generic.c:825
pde_write fs/proc/inode.c:330 [inline]
proc_reg_write+0x23d/0x330 fs/proc/inode.c:342
vfs_write+0x25c/0x1180 fs/read_write.c:682
ksys_write+0x12a/0x240 fs/read_write.c:736
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Because afs_parse_text_addrs() parses incorrectly, its return value -EINVAL
is assigned to vllist, which results in -EINVAL being used as the vllist
address when afs_put_vlserverlist() is executed.
Set the vllist value to NULL when a parsing error occurs to avoid this
issue.
Fixes: e2c2cb8ef07a ("afs: Simplify cell record handling")
Reported-by: syzbot+5c042fbab0b292c98fc6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5c042fbab0b292c98fc6
Tested-by: syzbot+5c042fbab0b292c98fc6@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/4119365.1753108011@warthog.procyon.org.uk
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a missing check for reaching the end of the string while attempting
to split a command.
Fixes: f94f70d39cc2 ("afs: Provide a way to configure address priorities")
Reported-by: syzbot+7741f872f3c53385a2e2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7741f872f3c53385a2e2
Signed-off-by: Leo Stone <leocstone@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/4119428.1753108152@warthog.procyon.org.uk
Acked-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The test is supposed to observe that the 'clash_resolve' stat counter
incremented (i.e., the code path was covered).
This check was incorrect, 'conntrack -S' needs to be called in the
revevant namespace, not the initial netns.
The clash resolution logic in conntrack is only exercised when multiple
packets with the same udp quadruple race. Depending on kernel config,
number of CPUs, scheduling policy etc. this might not trigger even
after several retries. Thus the script eventually returns SKIP if the
retry count is exceeded.
The udpclash tool with also exit with a failure if it did not observe
the expected number of replies.
In the script, make a note of this but do not fail anymore, just check if
the clash resolution logic triggered after all.
Remove the 'single-core' test: while unlikely, with preemptible kernel it
should be possible to also trigger clash resolution logic.
With this change the test will either SKIP or pass.
Hard error could be restored later once its clear whats going on, so
also dump 'conntrack -S' when some packets went missing to see if
conntrack dropped them on insert.
Fixes: 78a588363587 ("selftests: netfilter: add conntrack clash resolution test case")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250721223652.6956-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sometimes the netdev triggers causes tasks to get blocked for more then
120 seconds, which in turn makes the (WAN) network port on the NanoPi
R5S fail to come up.
This results in the following (partial) trace:
INFO: task kworker/0:1:11 blocked for more than 120 seconds.
Not tainted 6.16-rc6+unreleased-arm64-cknow #1 Debian 6.16~rc6-1~exp1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:1 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208060 flags:0x00000010
Workqueue: events_power_efficient reg_check_chans_work [cfg80211]
Call trace:
__switch_to+0xf8/0x168 (T)
__schedule+0x3f8/0xda8
schedule+0x3c/0x120
schedule_preempt_disabled+0x2c/0x58
__mutex_lock.constprop.0+0x4d0/0xab8
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x50/0x68
rtnl_lock+0x20/0x38
reg_check_chans_work+0x40/0x478 [cfg80211]
process_one_work+0x178/0x3e0
worker_thread+0x260/0x390
kthread+0x150/0x250
ret_from_fork+0x10/0x20
INFO: task kworker/0:1:11 is blocked on a mutex likely owned by task dhcpcd:615.
task:dhcpcd state:D stack:0 pid:615 tgid:615 ppid:614 task_flags:0x400140 flags:0x00000018
Call trace:
__switch_to+0xf8/0x168 (T)
__schedule+0x3f8/0xda8
schedule+0x3c/0x120
schedule_preempt_disabled+0x2c/0x58
rwsem_down_write_slowpath+0x1e4/0x750
down_write+0x98/0xb0
led_trigger_register+0x134/0x1c0
phy_led_triggers_register+0xf4/0x258 [libphy]
phy_attach_direct+0x30c/0x390 [libphy]
phylink_fwnode_phy_connect+0xb0/0x138 [phylink]
__stmmac_open+0xec/0x520 [stmmac]
stmmac_open+0x4c/0xe8 [stmmac]
__dev_open+0x130/0x2e0
__dev_change_flags+0x1c4/0x248
netif_change_flags+0x2c/0x80
dev_change_flags+0x88/0xc8
devinet_ioctl+0x35c/0x610
inet_ioctl+0x204/0x260
sock_do_ioctl+0x6c/0x140
sock_ioctl+0x2e4/0x388
__arm64_sys_ioctl+0xb4/0x120
invoke_syscall+0x6c/0x100
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x188
el0t_64_sync_handler+0x10c/0x140
el0t_64_sync+0x198/0x1a0
In order to not introduce a regression with kernel 6.16, drop the netdev
triggers for now while the problem is being investigated further.
Fixes: 1631cbdb8089 ("arm64: dts: rockchip: Improve LED config for NanoPi R5S")
Helped-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250722123628.25660-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If devicetree describes power supplies related to a PCI device, we
unnecessarily created a pwrctrl device even if CONFIG_PCI_PWRCTL was not
enabled.
We only need pci_pwrctrl_create_device() when CONFIG_PCI_PWRCTRL is
enabled. Compile it out when CONFIG_PCI_PWRCTRL is not enabled.
When pci_pwrctrl_create_device() creates and returns a pwrctrl device,
pci_scan_device() doesn't enumerate the PCI device. It assumes the pwrctrl
core will rescan the bus after turning on the power. However, if
CONFIG_PCI_PWRCTRL is not enabled, the rescan never happens, which breaks
PCI enumeration on any system that describes power supplies in devicetree
but does not use pwrctrl.
Jim reported that some brcmstb platforms break this way. The brcmstb
driver is still broken if CONFIG_PCI_PWRCTRL is enabled, but this commit at
least allows brcmstb to work when it's NOT enabled.
Fixes: 957f40d039a9 ("PCI/pwrctrl: Move creation of pwrctrl devices to pci_scan_device()")
Reported-by: Jim Quinlan <james.quinlan@broadcom.com>
Link: https://lore.kernel.org/r/CA+-6iNwgaByXEYD3j=-+H_PKAxXRU78svPMRHDKKci8AGXAUPg@mail.gmail.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.15
Link: https://patch.msgid.link/20250701064731.52901-1-manivannan.sadhasivam@linaro.org
|
|
this patch is to fix my previous Commit <e5182305a519> i have fixed mute
led but for by This patch corrects the coefficient mask value introduced
in commit <e5182305a519>, which was intended to enable the mute LED
functionality. During testing, multiple values were evaluated, and
an incorrect value was mistakenly included in the final commit.
This update fixes that error by applying the correct mask value for
proper mute LED behavior.
Tested on 6.15.5-arch1-1
Fixes: e5182305a519 ("ALSA: hda/realtek: Enable Mute LED on HP OMEN 16 Laptop xd000xx")
Signed-off-by: SHARAN KUMAR M <sharweshraajan@gmail.com>
Link: https://patch.msgid.link/20250722172224.15359-1-sharweshraajan@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
`cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change
to different stacks along with the Shadow Call Stack if it is enabled.
Those two stack changes cannot be done atomically and both functions
can be interrupted by SErrors or Debug Exceptions which, though unlikely,
is very much broken : if interrupted, we can end up with mismatched stacks
and Shadow Call Stack leading to clobbered stacks.
In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task,
but x18 stills points to the old task's SCS. When the interrupt handler
tries to save the task's SCS pointer, it will save the old task
SCS pointer (x18) into the new task struct (pointed to by SP_EL0),
clobbering it.
In `call_on_irq_stack()`, it can happen when switching from the task stack
to the IRQ stack and when switching back. In both cases, we can be
interrupted when the SCS pointer points to the IRQ SCS, but SP points to
the task stack. The nested interrupt handler pushes its return addresses
on the IRQ SCS. It then detects that SP points to the task stack,
calls `call_on_irq_stack()` and clobbers the task SCS pointer with
the IRQ SCS pointer, which it will also use !
This leads to tasks returning to addresses on the wrong SCS,
or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK
or FPAC if enabled.
This is possible on a default config, but unlikely.
However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and
instead the GIC is responsible for filtering what interrupts the CPU
should receive based on priority.
Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU
even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very*
frequently depending on the system configuration and workload, leading
to unpredictable kernel panics.
Completely mask DAIF in `cpu_switch_to()` and restore it when returning.
Do the same in `call_on_irq_stack()`, but restore and mask around
the branch.
Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency
of behaviour between all configurations.
Introduce and use an assembly macro for saving and masking DAIF,
as the existing one saves but only masks IF.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Reported-by: Cristian Prundeanu <cpru@amazon.com>
Fixes: 59b37fe52f49 ("arm64: Stash shadow stack pointer in the task struct on interrupt")
Tested-by: Cristian Prundeanu <cpru@amazon.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250718142814.133329-1-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As reported by the kernel test robot, a recent patch introduced an
unnecessary semicolon. Remove it.
Fixes: 55e8ff842051 ("drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506301704.0SBj6ply-lkp@intel.com/
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250714130631.1.I1cfae3222e344a3b3c770d079ee6b6f7f3b5d636@changeid
|
|
Most drivers only populate the fields cycles and cs_id of system_counterval
in their get_time_fn() callback for get_device_system_crosststamp(), unless
they explicitly provide nanosecond values.
When the use_nsecs field was added to struct system_counterval, most
drivers did not care. Clock sources other than CSID_GENERIC could then get
converted in convert_base_to_cs() based on an uninitialized use_nsecs field,
which usually results in -EINVAL during the following range check.
Pass in a fully zero initialized system_counterval_t to cure that.
Fixes: 6b2e29977518 ("timekeeping: Provide infrastructure for converting to/from a base clock")
Signed-off-by: Markus Blöchl <markus@blochl.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250720-timekeeping_uninit_crossts-v2-1-f513c885b7c2@blochl.de
|
|
My previous patch ended up causing a regression for the
DRM_IOCTL_NOUVEAU_NVIF ioctl. The intention of my patch was to only
pass ioctl commands that have the correct dir/type/nr bits into the
nouveau_abi16_ioctl() function.
This turned out to be too strict, as userspace does use at least
write-only and write-read direction settings. Checking for both of these
still did not fix the issue, so the best we can do for the 6.16 release
is to revert back to what we've had since linux-3.16.
This version is still fragile, but at least it is known to work with
existing userspace. Fixing this properly requires a better understanding
of what commands are being passed from userspace in practice, and how
that relies on the undocumented (miss)behavior in nouveau_drm_ioctl().
Fixes: e5478166dffb ("drm/nouveau: check ioctl command codes better")
Reported-by: Satadru Pramanik <satadru@gmail.com>
Closes: https://lore.kernel.org/lkml/CAFrh3J85tsZRpOHQtKgNHUVnn=EG=QKBnZTRtWS8eWSc1K1xkA@mail.gmail.com/
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://lore.kernel.org/lkml/aH9n_QGMFx2ZbKlw@debian.local/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250722115830.2587297-1-arnd@kernel.org
[ Add Closes: tags, fix minor typo in commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Andrei Lalaev reported a NULL pointer deref when a CAN device is
restarted from Bus Off and the driver does not implement the struct
can_priv::do_set_mode callback.
There are 2 code path that call struct can_priv::do_set_mode:
- directly by a manual restart from the user space, via
can_changelink()
- delayed automatic restart after bus off (deactivated by default)
To prevent the NULL pointer deference, refuse a manual restart or
configure the automatic restart delay in can_changelink() and report
the error via extack to user space.
As an additional safety measure let can_restart() return an error if
can_priv::do_set_mode is not set instead of dereferencing it
unchecked.
Reported-by: Andrei Lalaev <andrey.lalaev@gmail.com>
Closes: https://lore.kernel.org/all/20250714175520.307467-1-andrey.lalaev@gmail.com
Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface")
Link: https://patch.msgid.link/20250718-fix-nullptr-deref-do_set_mode-v1-1-0b520097bb96@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
might_sleep could be trigger in the atomic context in qfq_delete_class.
qfq_destroy_class was moved into atomic context locked
by sch_tree_lock to avoid a race condition bug on
qfq_aggregate. However, might_sleep could be triggered by
qfq_destroy_class, which introduced sleeping in atomic context (path:
qfq_destroy_class->qdisc_put->__qdisc_destroy->lockdep_unregister_key
->might_sleep).
Considering the race is on the qfq_aggregate objects, keeping
qfq_rm_from_agg in the lock but moving the left part out can solve
this issue.
Fixes: 5e28d5a3f774 ("net/sched: sch_qfq: Fix race condition on qfq_aggregate")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/4a04e0cc-a64b-44e7-9213-2880ed641d77@sabinyo.mountain
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20250717230128.159766-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The mutexes qdev_mutex and chip->mutex are acquired in that order
throughout the driver. To preserve proper lock hierarchy and avoid
potential deadlocks, they must be released in the reverse
order of acquisition.
This change reorders the unlock sequence to first release chip->mutex
followed by qdev_mutex, ensuring consistency with the locking pattern.
[ fixed the code indentations and Fixes tag by tiwai ]
Fixes: 326bbc348298a ("ALSA: usb-audio: qcom: Introduce QC USB SND offloading support")
Signed-off-by: Erick Karanja <karanja99erick@gmail.com>
Link: https://patch.msgid.link/20250721114554.1666104-1-karanja99erick@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
gve_tx_timeout was calculating missed completions in a way that is only
relevant in the GQ queue format. Additionally, it was attempting to
disable device interrupts, which is not needed in either GQ or DQ queue
formats.
As a result, TX timeouts with the DQ queue format likely would have
triggered early resets without kicking the queue at all.
This patch drops the check for pending work altogether and always kicks
the queue after validating the queue has not seen a TX timeout too
recently.
Cc: stable@vger.kernel.org
Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ")
Co-developed-by: Tim Hostetler <thostet@google.com>
Signed-off-by: Tim Hostetler <thostet@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250717192024.1820931-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The AARP proxy‐probe routine (aarp_proxy_probe_network) sends a probe,
releases the aarp_lock, sleeps, then re-acquires the lock. During that
window an expire timer thread (__aarp_expire_timer) can remove and
kfree() the same entry, leading to a use-after-free.
race condition:
cpu 0 | cpu 1
atalk_sendmsg() | atif_proxy_probe_device()
aarp_send_ddp() | aarp_proxy_probe_network()
mod_timer() | lock(aarp_lock) // LOCK!!
timeout around 200ms | alloc(aarp_entry)
and then call | proxies[hash] = aarp_entry
aarp_expire_timeout() | aarp_send_probe()
| unlock(aarp_lock) // UNLOCK!!
lock(aarp_lock) // LOCK!! | msleep(100);
__aarp_expire_timer(&proxies[ct]) |
free(aarp_entry) |
unlock(aarp_lock) // UNLOCK!! |
| lock(aarp_lock) // LOCK!!
| UAF aarp_entry !!
==================================================================
BUG: KASAN: slab-use-after-free in aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493
Read of size 4 at addr ffff8880123aa360 by task repro/13278
CPU: 3 UID: 0 PID: 13278 Comm: repro Not tainted 6.15.2 #3 PREEMPT(full)
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc1/0x630 mm/kasan/report.c:521
kasan_report+0xca/0x100 mm/kasan/report.c:634
aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493
atif_proxy_probe_device net/appletalk/ddp.c:332 [inline]
atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857
atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818
sock_do_ioctl+0xdc/0x260 net/socket.c:1190
sock_ioctl+0x239/0x6a0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x194/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcb/0x250 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated:
aarp_alloc net/appletalk/aarp.c:382 [inline]
aarp_proxy_probe_network+0xd8/0x630 net/appletalk/aarp.c:468
atif_proxy_probe_device net/appletalk/ddp.c:332 [inline]
atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857
atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818
Freed:
kfree+0x148/0x4d0 mm/slub.c:4841
__aarp_expire net/appletalk/aarp.c:90 [inline]
__aarp_expire_timer net/appletalk/aarp.c:261 [inline]
aarp_expire_timeout+0x480/0x6e0 net/appletalk/aarp.c:317
The buggy address belongs to the object at ffff8880123aa300
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 96 bytes inside of
freed 192-byte region [ffff8880123aa300, ffff8880123aa3c0)
Memory state around the buggy address:
ffff8880123aa200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880123aa280: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880123aa300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880123aa380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff8880123aa400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kito Xu (veritas501) <hxzene@gmail.com>
Link: https://patch.msgid.link/20250717012843.880423-1-hxzene@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On ASP versions v2.x we need to program the TX map vector register to
properly exercise end-to-end flow control, otherwise the TX engine can
either lock-up, or cause the hardware calculated checksum to be
wrong/corrupted when multiple back to back packets are being submitted
for transmission. This register defaults to 0, which means no flow
control being applied.
Fixes: e9f31435ee7d ("net: bcmasp: Add support for asp-v3.0")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250718212242.3447751-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The checksum mode has been added a while ago, but it is only validated
when manually launching mptcp_connect.sh with "-C".
The different CIs were then not validating these MPTCP Connect tests
with checksum enabled. To make sure they do, add a new test program
executing mptcp_connect.sh with the checksum mode.
Fixes: 94d66ba1d8e4 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-2-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "mmap" and "sendfile" alternate modes for mptcp_connect.sh/.c are
available from the beginning, but only tested when mptcp_connect.sh is
manually launched with "-m mmap" or "-m sendfile", not via the
kselftests helpers.
The MPTCP CI was manually running "mptcp_connect.sh -m mmap", but not
"-m sendfile". Plus other CIs, especially the ones validating the stable
releases, were not validating these alternate modes.
To make sure these modes are validated by these CIs, add two new test
programs executing mptcp_connect.sh with the alternate modes.
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-1-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As described by Vitaly Lifshits:
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set.
Unfortunately some systems have left the factory with an uninitialized
value of 0xFFFF at register address 0x3F (checksum word location).
So on Tiger Lake platform we ignore the computed checksum when such
condition is encountered.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info>
Tested-by: Vlad URSU <vlad@ursu.me>
Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum")
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
As described by Vitaly Lifshits:
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set. Since Tiger Lake devices were the first to have
> this lock, some systems in the field did not meet this requirement.
> Therefore, for these transitional devices we skip checksum update and
> verification, if the valid bit is not set.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum")
Cc: stable@vger.kernel.org
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add check for the return value of devm_kmemdup()
to prevent potential null pointer dereference.
Fixes: c76488109616 ("ice: Implement Dynamic Device Personalization (DDP) download")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When the PF is processing an Admin Queue message to delete a VF's MACs
from the MAC filter, we currently check if the PF set the MAC and if
the VF is trusted.
This results in undesirable behaviour, where if a trusted VF with a
PF-set MAC sets itself down (which sends an AQ message to delete the
VF's MAC filters) then the VF MAC is erased from the interface.
This results in the VF losing its PF-set MAC which should not happen.
There is no need to check for trust at all, because an untrusted VF
cannot change its own MAC. The only check needed is whether the PF set
the MAC. If the PF set the MAC, then don't erase the MAC on link-down.
Resolve this by changing the deletion check only for PF-set MAC.
(the out-of-tree driver has also intentionally removed the check for VF
trust here with OOT driver version 2.26.8, this changes the Linux kernel
driver behaviour and comment to match the OOT driver behaviour)
Fixes: ea2a1cfc3b201 ("i40e: Fix VF MAC filter removal")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently the tx_dropped field in VF stats is not updated correctly
when reading stats from the PF. This is because it reads from
i40e_eth_stats.tx_discards which seems to be unused for per VSI stats,
as it is not updated by i40e_update_eth_stats() and the corresponding
register, GLV_TDPC, is not implemented[1].
Use i40e_eth_stats.tx_errors instead, which is actually updated by
i40e_update_eth_stats() by reading from GLV_TEPC.
To test, create a VF and try to send bad packets through it:
$ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
$ cat test.py
from scapy.all import *
vlan_pkt = Ether(dst="ff:ff:ff:ff:ff:ff") / Dot1Q(vlan=999) / IP(dst="192.168.0.1") / ICMP()
ttl_pkt = IP(dst="8.8.8.8", ttl=0) / ICMP()
print("Send packet with bad VLAN tag")
sendp(vlan_pkt, iface="enp2s0f0v0")
print("Send packet with TTL=0")
sendp(ttl_pkt, iface="enp2s0f0v0")
$ ip -s link show dev enp2s0f0
16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
vf 0 link/ether e2:c6:fd:c1:1e:92 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
RX: bytes packets mcast bcast dropped
0 0 0 0 0
TX: bytes packets dropped
0 0 0
$ python test.py
Send packet with bad VLAN tag
.
Sent 1 packets.
Send packet with TTL=0
.
Sent 1 packets.
$ ip -s link show dev enp2s0f0
16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
vf 0 link/ether e2:c6:fd:c1:1e:92 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
RX: bytes packets mcast bcast dropped
0 0 0 0 0
TX: bytes packets dropped
0 0 0
A packet with non-existent VLAN tag and a packet with TTL = 0 are sent,
but tx_dropped is not incremented.
After patch:
$ ip -s link show dev enp2s0f0
19: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
vf 0 link/ether 4a:b7:3d:37:f7:56 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
RX: bytes packets mcast bcast dropped
0 0 0 0 0
TX: bytes packets dropped
0 0 2
Fixes: dc645daef9af5bcbd9c ("i40e: implement VF stats NDO")
Signed-off-by: Dennis Chen <dechen@redhat.com>
Link: https://www.intel.com/content/www/us/en/content-details/596333/intel-ethernet-controller-x710-tm4-at2-carlsville-datasheet.html
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit 13423063c7cb ("arm64: kvm, smccc: Introduce and use API for
getting hypervisor UUID") replaced the explicit register constants
with the UUID_INIT macro. However, there is an endian issue, meaning
the UUID generated and used in the handshake didn't match UUID prior to
the commit.
The change in UUID causes the SMCCC vendor handshake to fail with older
guest kernels, meaning devices such as PTP were not available in the
guest.
This patch updates the parameters to the macro to generate a UUID which
matches the previous value, and re-establish backwards compatibility
with older guest kernels.
Fixes: 13423063c7cb ("arm64: kvm, smccc: Introduce and use API for getting hypervisor UUID")
Signed-off-by: Jack Thomson <jackabt@amazon.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250721130558.50823-1-jackabt.amazon@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
One initial setting is 5 bytes, so num_init_writes should divide by 5.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250721112334.388506-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On g4x we currently use the 96MHz non-SSC refclk, which can't actually
generate an exact 2.7 Gbps link rate. In practice we end up with 2.688
Gbps which seems to be close enough to actually work, but link training
is currently failing due to miscalculating the DP_LINK_BW value (we
calcualte it directly from port_clock which reflects the actual PLL
outpout frequency).
Ideas how to fix this:
- nudge port_clock back up to 270000 during PLL computation/readout
- track port_clock and the nominal link rate separately so they might
differ a bit
- switch to the 100MHz refclk, but that one should be SSC so perhaps
not something we want
While we ponder about a better solution apply some band aid to the
immediate issue of miscalculated DP_LINK_BW value. With this
I can again use 2.7 Gbps link rate on g4x.
Cc: stable@vger.kernel.org
Fixes: 665a7b04092c ("drm/i915: Feed the DPLL output freq back into crtc_state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit a8b874694db5cae7baaf522756f87acd956e6e66)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The glitch was detected in the high frequency of the HP playback.
This patch adjusts the DAC dither setting to avoid this situation
for almost all cases.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://patch.msgid.link/20250721034728.1396238-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
Nathan Chancellor
Kent Overstreet
Stephen Rothwell
Akinobu Mita
SeongJae Park
Lucas De Marchi
Jijie Shao
Jian Shen
Yonglong Liu
Halil Pasic
Nimrod Oren
Yang Xiwen
Viresh Kumar
Akhil R
Kees Cook
Manuel Andreas
Al Viro
Aakash Deep Sarkar
Gabor Juhos
Johan Hovold
Edward Adam Davis
Leo Stone
Florian Westphal
Diederik de Haas
Manivannan Sadhasivam
SHARAN KUMAR M
Ada Couprie Diaz
Douglas Anderson
Markus Blöchl
Arnd Bergmann
Marc Kleine-Budde
Xiang Mei
Erick Karanja
Praveen Kaligineedi
Kito Xu (veritas501)
Florian Fainelli
Matthieu Baerts (NGI0)
Jacek Kowalski
Haoxiang Li
Jamie Bainbridge
Dennis Chen
Jack Thomson
Shuming Fan
Ville Syrjälä
Derek Fang