aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/exported-sql-viewer.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-09-04ath9k: dyanck: introduce ath_dynack_set_timeout routineLorenzo Bianconi1-16/+21
Introduce ath_dynack_set_timeout routine to configure slottime/ack/cts timeouts and remove duplicated code Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-04ath9k: dynack: fix possible deadlock in ath_dynack_node_{de}initLorenzo Bianconi1-4/+4
Fix following lockdep warning disabling bh in ath_dynack_node_init/ath_dynack_node_deinit [ 75.955878] -------------------------------- [ 75.955880] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 75.955884] swapper/0/0 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 75.955888] 00000000792a7ee0 (&(&da->qlock)->rlock){+.?.}, at: ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.955905] {SOFTIRQ-ON-W} state was registered at: [ 75.955912] lock_acquire+0x9a/0x160 [ 75.955917] _raw_spin_lock+0x2c/0x70 [ 75.955927] ath_dynack_node_init+0x2a/0x60 [ath9k_hw] [ 75.955934] ath9k_sta_state+0xec/0x160 [ath9k] [ 75.955976] drv_sta_state+0xb2/0x740 [mac80211] [ 75.956008] sta_info_insert_finish+0x21a/0x420 [mac80211] [ 75.956039] sta_info_insert_rcu+0x12b/0x2c0 [mac80211] [ 75.956069] sta_info_insert+0x7/0x70 [mac80211] [ 75.956093] ieee80211_prep_connection+0x42e/0x730 [mac80211] [ 75.956120] ieee80211_mgd_auth.cold+0xb9/0x15c [mac80211] [ 75.956152] cfg80211_mlme_auth+0x143/0x350 [cfg80211] [ 75.956169] nl80211_authenticate+0x25e/0x2b0 [cfg80211] [ 75.956172] genl_family_rcv_msg+0x198/0x400 [ 75.956174] genl_rcv_msg+0x42/0x90 [ 75.956176] netlink_rcv_skb+0x35/0xf0 [ 75.956178] genl_rcv+0x1f/0x30 [ 75.956180] netlink_unicast+0x154/0x200 [ 75.956182] netlink_sendmsg+0x1bf/0x3d0 [ 75.956186] ___sys_sendmsg+0x2c2/0x2f0 [ 75.956187] __sys_sendmsg+0x44/0x80 [ 75.956190] do_syscall_64+0x55/0x1a0 [ 75.956192] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 75.956194] irq event stamp: 2357092 [ 75.956196] hardirqs last enabled at (2357092): [<ffffffff818c62de>] _raw_spin_unlock_irqrestore+0x3e/0x50 [ 75.956199] hardirqs last disabled at (2357091): [<ffffffff818c60b1>] _raw_spin_lock_irqsave+0x11/0x80 [ 75.956202] softirqs last enabled at (2357072): [<ffffffff8106dc09>] irq_enter+0x59/0x60 [ 75.956204] softirqs last disabled at (2357073): [<ffffffff8106dcbe>] irq_exit+0xae/0xc0 [ 75.956206] other info that might help us debug this: [ 75.956207] Possible unsafe locking scenario: [ 75.956208] CPU0 [ 75.956209] ---- [ 75.956210] lock(&(&da->qlock)->rlock); [ 75.956213] <Interrupt> [ 75.956214] lock(&(&da->qlock)->rlock); [ 75.956216] *** DEADLOCK *** [ 75.956217] 1 lock held by swapper/0/0: [ 75.956219] #0: 000000003bb5675c (&(&sc->sc_pcu_lock)->rlock){+.-.}, at: ath9k_tasklet+0x55/0x240 [ath9k] [ 75.956225] stack backtrace: [ 75.956228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc1-wdn+ #13 [ 75.956229] Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009 [ 75.956231] Call Trace: [ 75.956233] <IRQ> [ 75.956236] dump_stack+0x67/0x90 [ 75.956239] mark_lock+0x4c1/0x640 [ 75.956242] ? check_usage_backwards+0x130/0x130 [ 75.956245] ? sched_clock_local+0x12/0x80 [ 75.956247] __lock_acquire+0x484/0x7a0 [ 75.956250] ? __lock_acquire+0x3b9/0x7a0 [ 75.956252] lock_acquire+0x9a/0x160 [ 75.956259] ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956262] _raw_spin_lock_bh+0x34/0x80 [ 75.956268] ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956275] ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956280] ath_rx_tasklet+0xd09/0xe90 [ath9k] [ 75.956286] ath9k_tasklet+0x102/0x240 [ath9k] [ 75.956288] tasklet_action_common.isra.0+0x6d/0x170 [ 75.956291] __do_softirq+0xcc/0x425 [ 75.956294] irq_exit+0xae/0xc0 [ 75.956296] do_IRQ+0x8a/0x110 [ 75.956298] common_interrupt+0xf/0xf [ 75.956300] </IRQ> [ 75.956303] RIP: 0010:cpuidle_enter_state+0xb2/0x400 [ 75.956308] RSP: 0018:ffffffff82203e70 EFLAGS: 00000202 ORIG_RAX: ffffffffffffffd7 [ 75.956310] RAX: ffffffff82219800 RBX: ffffffff822bd0a0 RCX: 0000000000000000 [ 75.956312] RDX: 0000000000000046 RSI: 0000000000000006 RDI: ffffffff82219800 [ 75.956314] RBP: ffff888155a01c00 R08: 00000011af51aabe R09: 0000000000000000 [ 75.956315] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 [ 75.956317] R13: 00000011af51aabe R14: 0000000000000003 R15: ffffffff82219800 [ 75.956321] cpuidle_enter+0x24/0x40 [ 75.956323] do_idle+0x1ac/0x220 [ 75.956326] cpu_startup_entry+0x14/0x20 [ 75.956329] start_kernel+0x482/0x489 [ 75.956332] secondary_startup_64+0xa4/0xb0 Fixes: c774d57fd47c ("ath9k: add dynamic ACK timeout estimation") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-04ath9k: add loader for AR92XX (and older) pci(e)Christian Lamparter3-0/+233
Atheros cards with a AR92XX generation (and older) chip usually store their pci(e) initialization vectors on an external eeprom chip. However these chips technically don't need the eeprom chip attached, the AR9280 Datasheet in section "6.1.2 DEVICE_ID" describes that "... if the EEPROM content is not valid, a value of 0xFF1C returns when read from the register". So, they will show up on the system's pci bus. However in that state, ath9k can't load, since it relies on having the correct pci-id, otherwise it doesn't know what chip it actually is. This happens on many embedded devices like routers and accesspoint since they want to keep the BOM low and store the pci(e) initialization vectors together with the calibration data on the system's FLASH, which is out of reach of the ath9k chip. Furthermore, Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway) need to be able to initialize the PCIe wifi device. Normally, this should be done as a pci quirk during the early stages of booting linux. However, this isn't possible for devices which have the init code for the Atheros chip stored on NAND in an UBI volume. Hence, this module can be used to initialize the chip when the user-space is ready to extract the init code. Martin Blumenstingl prodived the following fixes: owl-loader: add support for OWL emulation PCI devices owl-loader: don't re-scan the bus when ath9k_pci_fixup failed owl-loader: use dev_* instead of pr_* logging functions owl-loader: auto-generate the eeprom filename as fallback owl-loader: add a debug message when swapping the eeprom data owl-loader: add missing newlines in log messages Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-04carl9170: remove set but not used variable 'udev'YueHaibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/ath/carl9170/usb.c: In function carl9170_usb_disconnect: drivers/net/wireless/ath/carl9170/usb.c:1110:21: warning: variable udev set but not used [-Wunused-but-set-variable] It is not use since commit feb09b293327 ("carl9170: fix misuse of device driver API") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-04wil6210: Delete an unnecessary kfree() call in wil_tid_ampdu_rx_alloc()Markus Elfring1-1/+0
A null pointer would be passed to a call of the function “kfree” directly after a call of the function “kcalloc” failed at one place. Remove this superfluous function call. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-04wil6210: Add EDMG channel supportAlexei Avshalom Lazar6-13/+240
Add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11. wil6210 reports it's EDMG capabilities (that are also based on FW capability) to cfg80211 by filling wiphy->bands[NL80211_BAND_60GHZ]->edmg_cap. wil6210 handles edmg.channels and edmg.bw_config requested in connect and start_ap operations. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-04wil6210: fix wil_cid_valid with negative cid valuesColin Ian King1-1/+1
There are several occasions where a negative cid value is passed into wil_cid_valid and this is converted into a u8 causing the range check of cid >= 0 to always succeed. Fix this by making the cid argument an int to handle any -ve error value of cid. An example of this behaviour is in wil_cfg80211_dump_station, where cid is assigned -ENOENT if the call to wil_find_cid_by_idx fails, and this -ve value is passed to wil_cid_valid. I believe that the conversion of -ENOENT to the u8 value 254 which is greater than wil->max_assoc_sta causes wil_find_cid_by_idx to currently work fine, but I think is by luck and not the intended behaviour. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-02mvpp2: percpu buffersMatteo Croce2-23/+222
Every mvpp2 unit can use up to 8 buffers mapped by the BM (the HW buffer manager). The HW will place the frames in the buffer pool depending on the frame size: short (< 128 bytes), long (< 1664) or jumbo (up to 9856). As any unit can have up to 4 ports, the driver allocates only 2 pools, one for small and one long frames, and share them between ports. When the first port MTU is set higher than 1664 bytes, a third pool is allocated for jumbo frames. This shared allocation makes impossible to use percpu allocators, and creates contention between HW queues. If possible, i.e. if the number of possible CPU are less than 8 and jumbo frames are not used, switch to a new scheme: allocate 8 per-cpu pools for short and long frames and bind every pool to an RXQ. When the first port MTU is set higher than 1664 bytes, the allocation scheme is reverted to the old behaviour (3 shared pools), and when all ports MTU are lowered, the per-cpu buffers are allocated again. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-02mvpp2: refactor BM pool functionsMatteo Croce1-19/+16
Refactor mvpp2_bm_pool_create(), mvpp2_bm_pool_destroy() and mvpp2_bm_pools_init() so that they accept a struct device instead of a struct platform_device, as they just need platform_device->dev. Removing such dependency makes the BM code more reusable in context where we don't have a pointer to the platform_device. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-02net: dsa: Fix off-by-one number of calls to devlink_port_unregisterVladimir Oltean1-10/+29
When a function such as dsa_slave_create fails, currently the following stack trace can be seen: [ 2.038342] sja1105 spi0.1: Probed switch chip: SJA1105T [ 2.054556] sja1105 spi0.1: Reset switch and programmed static config [ 2.063837] sja1105 spi0.1: Enabled switch tagging [ 2.068706] fsl-gianfar soc:ethernet@2d90000 eth2: error -19 setting up slave phy [ 2.076371] ------------[ cut here ]------------ [ 2.080973] WARNING: CPU: 1 PID: 21 at net/core/devlink.c:6184 devlink_free+0x1b4/0x1c0 [ 2.088954] Modules linked in: [ 2.092005] CPU: 1 PID: 21 Comm: kworker/1:1 Not tainted 5.3.0-rc6-01360-g41b52e38d2b6-dirty #1746 [ 2.100912] Hardware name: Freescale LS1021A [ 2.105162] Workqueue: events deferred_probe_work_func [ 2.110287] [<c03133a4>] (unwind_backtrace) from [<c030d8cc>] (show_stack+0x10/0x14) [ 2.117992] [<c030d8cc>] (show_stack) from [<c10b08d8>] (dump_stack+0xb4/0xc8) [ 2.125180] [<c10b08d8>] (dump_stack) from [<c0349d04>] (__warn+0xe0/0xf8) [ 2.132018] [<c0349d04>] (__warn) from [<c0349e34>] (warn_slowpath_null+0x40/0x48) [ 2.139549] [<c0349e34>] (warn_slowpath_null) from [<c0f19d74>] (devlink_free+0x1b4/0x1c0) [ 2.147772] [<c0f19d74>] (devlink_free) from [<c1064fc0>] (dsa_switch_teardown+0x60/0x6c) [ 2.155907] [<c1064fc0>] (dsa_switch_teardown) from [<c1065950>] (dsa_register_switch+0x8e4/0xaa8) [ 2.164821] [<c1065950>] (dsa_register_switch) from [<c0ba7fe4>] (sja1105_probe+0x21c/0x2ec) [ 2.173216] [<c0ba7fe4>] (sja1105_probe) from [<c0b35948>] (spi_drv_probe+0x80/0xa4) [ 2.180920] [<c0b35948>] (spi_drv_probe) from [<c0a4c1cc>] (really_probe+0x108/0x400) [ 2.188711] [<c0a4c1cc>] (really_probe) from [<c0a4c694>] (driver_probe_device+0x78/0x1bc) [ 2.196933] [<c0a4c694>] (driver_probe_device) from [<c0a4a3dc>] (bus_for_each_drv+0x58/0xb8) [ 2.205414] [<c0a4a3dc>] (bus_for_each_drv) from [<c0a4c024>] (__device_attach+0xd0/0x168) [ 2.213637] [<c0a4c024>] (__device_attach) from [<c0a4b1d0>] (bus_probe_device+0x84/0x8c) [ 2.221772] [<c0a4b1d0>] (bus_probe_device) from [<c0a4b72c>] (deferred_probe_work_func+0x84/0xc4) [ 2.230686] [<c0a4b72c>] (deferred_probe_work_func) from [<c03650a4>] (process_one_work+0x218/0x510) [ 2.239772] [<c03650a4>] (process_one_work) from [<c03660d8>] (worker_thread+0x2a8/0x5c0) [ 2.247908] [<c03660d8>] (worker_thread) from [<c036b348>] (kthread+0x148/0x150) [ 2.255265] [<c036b348>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c) [ 2.262444] Exception stack(0xea965fb0 to 0xea965ff8) [ 2.267466] 5fa0: 00000000 00000000 00000000 00000000 [ 2.275598] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.283729] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 2.290333] ---[ end trace ca5d506728a0581a ]--- devlink_free is complaining right here: WARN_ON(!list_empty(&devlink->port_list)); This happens because devlink_port_unregister is no longer done right away in dsa_port_setup when a DSA_PORT_TYPE_USER has failed. Vivien said about this change that: Also no need to call devlink_port_unregister from within dsa_port_setup as this step is inconditionally handled by dsa_port_teardown on error. which is not really true. The devlink_port_unregister function _is_ being called unconditionally from within dsa_port_setup, but not for this port that just failed, just for the previous ones which were set up. ports_teardown: for (i = 0; i < port; i++) dsa_port_teardown(&ds->ports[i]); Initially I was tempted to fix this by extending the "for" loop to also cover the port that failed during setup. But this could have potentially unforeseen consequences unrelated to devlink_port or even other types of ports than user ports, which I can't really test for. For example, if for some reason devlink_port_register itself would fail, then unconditionally unregistering it in dsa_port_teardown would not be a smart idea. The list might go on. So just make dsa_port_setup undo the setup it had done upon failure, and let the for loop undo the work of setting up the previous ports, which are guaranteed to be brought up to a consistent state. Fixes: 955222ca5281 ("net: dsa: use a single switch statement for port setup") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-02mlx5: Add missing init_net check in FIB notifierJiri Pirko1-0/+3
Take only FIB events that are happening in init_net into account. No other namespaces are supported. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Roi Dayan <roid@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-02Linux 5.3-rc7Linus Torvalds1-1/+1
2019-09-01net: dsa: mv88e6xxx: centralize SERDES IRQ handlingVivien Didelot4-175/+69
The .serdes_irq_setup are all following the same steps: get the SERDES lane, get the IRQ mapping, request the IRQ, then enable it. So do the .serdes_irq_free implementations: get the SERDES lane, disable the IRQ, then free it. This patch removes these operations in favor of generic functions. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: introduce .serdes_irq_statusVivien Didelot4-21/+64
Introduce a new .serdes_irq_status operation to prepare the abstraction of IRQ thread from the SERDES IRQ setup code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: introduce .serdes_irq_enableVivien Didelot5-50/+66
Introduce a new .serdes_irq_enable operation to prepare the abstraction of IRQ enabling from the SERDES IRQ setup code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: pass lane to .serdes_powerVivien Didelot5-27/+44
Now the first step of all .serdes_power implementations is getting the lane mapping. Since we have an operation for that, call it in the wrapper and pass the lane down to the .serdes_power operation. This also allows to avoid querying the SERDES lane twice in mv88e6xxx_port_set_cmode. At the same time provide mv88e6xxx_serdes_power_{up,down} helpers and prefer up/down instead of on/off as in the documentation. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: merge mv88e6352_serdes_power_setVivien Didelot1-14/+4
The mv88e6352_serdes_power_set helper is only used at one place, in mv88e6352_serdes_power. Keep it simple and merge the two functions together. Use mv88e6xxx_serdes_get_lane instead of mv88e6352_port_has_serdes to avoid moving code. No functional changes. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: implement mv88e6352_serdes_get_laneVivien Didelot3-1/+15
Even though 88E6352 has no dedicated lane for SERDES interfaces, it uses a similar code as the other .serdes_get_lane implementations to check the port's CMODE and ensure that SERDES operations are doable. For consistency, implement mv88e6352_serdes_get_lane for the 88E6352 and similar switches which simply returns an unused 0xff lane address. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: simplify .serdes_get_laneVivien Didelot4-122/+74
Because the mapping between a SERDES interface and its lane is static, we don't need to stick with negative error codes actually and we can simply return 0 if there is no lane, just like the IRQ mapping. This way we can keep a simple and intuitive API using unsigned lane numbers while simplifying the implementations with single return statements. Last but not least, fix the reverse chrismas tree in mv88e6390x_serdes_get_lane. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: introduce .serdes_irq_mappingVivien Didelot4-6/+45
Introduce a new .serdes_irq_mapping operation to prepare the abstraction of IRQ mapping from the SERDES IRQ setup code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: fix SERDES IRQ mappingVivien Didelot2-11/+5
The current mv88e6xxx SERDES code checks for negative error code from irq_find_mapping, while this function returns an unsigned integer. This patch removes this dead code and simply returns 0 is no IRQ is found. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: check errors in mv88e6352_serdes_irq_linkVivien Didelot1-2/+7
The mv88e6352_serdes_irq_link helper is not checking for any error that may occur during hardware accesses. Worst, the "up" boolean is set from the potentially unused "status" variable, if read operations failed. As done in mv88e6390_serdes_irq_link_sgmii, return right away and do not call dsa_port_phylink_mac_change if an error occurred. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: hns3: remove set but not used variable 'qos'YueHaibing1-2/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c: In function 'hclge_restore_vlan_table': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8016:18: warning: variable 'qos' set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 70a214903da9 ("net: hns3: reduce the parameters of some functions") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: hns3: remove redundant assignment to pointer reg_infoColin Ian King1-1/+1
Pointer reg_info is being initialized with a value that is never read and is being re-assigned a little later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: seeq: Fix the function used to release some memory in an error handling pathChristophe JAILLET1-3/+4
In commit 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv"), a call to 'get_zeroed_page()' has been turned into a call to 'dma_alloc_coherent()'. Only the remove function has been updated to turn the corresponding 'free_page()' into 'dma_free_attrs()'. The error hndling path of the probe function has not been updated. Fix it now. Rename the corresponding label to something more in line. Fixes: 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01netlabel: remove redundant assignment to pointer iterColin Ian King1-1/+1
Pointer iter is being initialized with a value that is never read and is being re-assigned a little later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01r8169: don't set bit RxVlan on RTL8125Heiner Kallweit1-2/+4
RTL8125 uses a different register for VLAN offloading config, therefore don't set bit RxVlan. Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net/ncsi: add response handlers for PLDM over NC-SIBen Wei2-2/+14
This patch adds handlers for PLDM over NC-SI command response. This enables NC-SI driver recognizes the packet type so the responses don't get dropped as unknown packet type. PLDM over NC-SI are not handled in kernel driver for now, but can be passed back to user space via Netlink for further handling. Signed-off-by: Ben Wei <benwei@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove functionsChristophe JAILLET1-1/+4
Call to 'pci_free_irq_vectors()' are missing both in the error handling path of the probe function, and in the remove function. Add them. Fixes: 19971f5ea0ab ("enetc: add PTP clock driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: bcmgenet: use ethtool_op_get_ts_info()Ryan M. Collins1-0/+1
This change enables the use of SW timestamping on the Raspberry Pi 4. bcmgenet's transmit function bcmgenet_xmit() implements software timestamping. However the SOF_TIMESTAMPING_TX_SOFTWARE capability was missing and only SOF_TIMESTAMPING_RX_SOFTWARE was announced. By using ethtool_ops bcmgenet_ethtool_ops() as get_ts_info(), the SOF_TIMESTAMPING_TX_SOFTWARE capability is announced. Similar to commit a8f5cb9e7991 ("smsc95xx: use ethtool_op_get_ts_info()") Signed-off-by: Ryan M. Collins <rmc032@bucknell.edu> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31tc-testing: don't hardcode 'ip' in nsPlugin.pyDavide Caratti1-11/+11
the following tdc test fails on Fedora: # ./tdc.py -e 2638 -- ns/SubPlugin.__init__ Test 2638: Add matchall and try to get it -----> prepare stage *** Could not execute: "$TC qdisc add dev $DEV1 clsact" -----> prepare stage *** Error message: "/bin/sh: ip: command not found" returncode 127; expected [0] -----> prepare stage *** Aborting test run. Let nsPlugin.py use the 'IP' variable introduced with commit 92c1a19e2fb9 ("tc-tests: added path to ip command in tdc"), so that the path to 'ip' is correctly resolved to the value we have in tdc_config.py. # ./tdc.py -e 2638 -- ns/SubPlugin.__init__ Test 2638: Add matchall and try to get it All test results: 1..1 ok 1 2638 - Add matchall and try to get it Fixes: 489ce2f42514 ("tc-testing: Restore original behaviour for namespaces in tdc") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31devlink: Use switch-case instead of if-elseParav Pandit1-17/+22
Make core more readable with switch-case for various port flavours. Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31devlink: Make port index data type as unsigned intParav Pandit2-3/+4
Devlink port index attribute is returned to users as u32 through netlink response. Change index data type from 'unsigned' to 'unsigned int' to avoid below checkpatch.pl warning. WARNING: Prefer 'unsigned int' to bare use of 'unsigned' 81: FILE: include/net/devlink.h:81: + unsigned index; Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: tls: export protocol version, cipher, tx_conf/rx_conf to socket diagDavide Caratti4-0/+97
When an application configures kernel TLS on top of a TCP socket, it's now possible for inet_diag_handler() to collect information regarding the protocol version, the cipher type and TX / RX configuration, in case INET_DIAG_INFO is requested. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31tcp: ulp: add functions to dump ulp-specific informationDavide Caratti3-1/+62
currently, only getsockopt(TCP_ULP) can be invoked to know if a ULP is on top of a TCP socket. Extend idiag_get_aux() and idiag_get_aux_size(), introduced by commit b37e88407c1d ("inet_diag: allow protocols to provide additional data"), to report the ULP name and other information that can be made available by the ULP through optional functions. Users having CAP_NET_ADMIN privileges will then be able to retrieve this information through inet_diag_handler, if they specify INET_DIAG_INFO in the request. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net/tls: use RCU protection on icsk->icsk_ulp_dataJakub Kicinski5-12/+29
We need to make sure context does not get freed while diag code is interrogating it. Free struct tls_context with kfree_rcu(). We add the __rcu annotation directly in icsk, and cast it away in the datapath accessor. Presumably all ULPs will do a similar thing. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: dsa: microchip: add KSZ8563 compatibility stringRazvan Stefanescu1-0/+1
It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31dt-bindings: net: dsa: document additional Microchip KSZ8563 switchRazvan Stefanescu1-0/+1
It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: aquantia: fix out of memory condition on rx sideDmitry Bogdanov1-1/+2
On embedded environments with hard memory limits it is a normal although rare case when skb can't be allocated on rx part under high traffic. In such OOM cases napi_complete_done() was not called. So the napi object became in an invalid state like it is "scheduled". Kernel do not re-schedules the poll of that napi object. Consequently, kernel can not remove that object the system hangs on `ifconfig down` waiting for a poll. We are fixing this by gracefully closing napi poll routine with correct invocation of napi_complete_done. This was reproduced with artificially failing the allocation of skb to simulate an "out of memory" error case and check that traffic does not get stuck. Fixes: 970a2e9864b0 ("net: ethernet: aquantia: Vector operations") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: aquantia: linkstate irq should be oneshotIgor Russkikh1-1/+1
Declaring threaded irq handler should also indicate the irq is oneshot. It is oneshot indeed, because HW implements irq automasking on trigger. Not declaring this causes some kernel configurations to fail on interface up, because request_threaded_irq returned an err code. The issue was originally hidden on normal x86_64 configuration with latest kernel, because depending on interrupt controller, irq driver added ONESHOT flag on its own. Issue was observed on older kernels (4.14) where no such logic exists. Fixes: 4c83f170b3ac ("net: aquantia: link status irq handling") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reported-by: Michael Symolkin <Michael.Symolkin@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: aquantia: reapply vlan filters on upDmitry Bogdanov1-0/+4
In case of device reconfiguration the driver may reset the device invisible for other modules, vlan module in particular. So vlans will not be removed&created and vlan filters will not be configured in the device. The patch reapplies the vlan filters at device start. Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: aquantia: fix limit of vlan filtersDmitry Bogdanov1-1/+1
Fix a limit condition of vlans on the interface before setting vlan promiscuous mode Fixes: 48dd73d08d4dd ("net: aquantia: fix vlans not working over bridged network") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: aquantia: fix removal of vlan 0Dmitry Bogdanov1-1/+2
Due to absence of checking against the rx flow rule when vlan 0 is being removed, the other rule could be removed instead of the rule with vlan 0 Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rateVladimir Oltean1-8/+11
The discussion to be made is absolutely the same as in the case of previous patch ("taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte"). Nothing is lost when setting a default. Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: e0a7683d30e9 ("net/sched: cbs: fix port_rate miscalculation") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byteVladimir Oltean1-10/+13
The taprio budget needs to be adapted at runtime according to interface link speed. But that handling is problematic. For one thing, installing a qdisc on an interface that doesn't have carrier is not illegal. But taprio prints the following stack trace: [ 31.851373] ------------[ cut here ]------------ [ 31.856024] WARNING: CPU: 1 PID: 207 at net/sched/sch_taprio.c:481 taprio_dequeue+0x1a8/0x2d4 [ 31.864566] taprio: dequeue() called with unknown picos per byte. [ 31.864570] Modules linked in: [ 31.873701] CPU: 1 PID: 207 Comm: tc Not tainted 5.3.0-rc5-01199-g8838fe023cd6 #1689 [ 31.881398] Hardware name: Freescale LS1021A [ 31.885661] [<c03133a4>] (unwind_backtrace) from [<c030d8cc>] (show_stack+0x10/0x14) [ 31.893368] [<c030d8cc>] (show_stack) from [<c10ac958>] (dump_stack+0xb4/0xc8) [ 31.900555] [<c10ac958>] (dump_stack) from [<c0349d04>] (__warn+0xe0/0xf8) [ 31.907395] [<c0349d04>] (__warn) from [<c0349d64>] (warn_slowpath_fmt+0x48/0x6c) [ 31.914841] [<c0349d64>] (warn_slowpath_fmt) from [<c0f38db4>] (taprio_dequeue+0x1a8/0x2d4) [ 31.923150] [<c0f38db4>] (taprio_dequeue) from [<c0f227b0>] (__qdisc_run+0x90/0x61c) [ 31.930856] [<c0f227b0>] (__qdisc_run) from [<c0ec82ac>] (net_tx_action+0x12c/0x2bc) [ 31.938560] [<c0ec82ac>] (net_tx_action) from [<c0302298>] (__do_softirq+0x130/0x3c8) [ 31.946350] [<c0302298>] (__do_softirq) from [<c03502a0>] (irq_exit+0xbc/0xd8) [ 31.953536] [<c03502a0>] (irq_exit) from [<c03a4808>] (__handle_domain_irq+0x60/0xb4) [ 31.961328] [<c03a4808>] (__handle_domain_irq) from [<c0754478>] (gic_handle_irq+0x58/0x9c) [ 31.969638] [<c0754478>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90) [ 31.977076] Exception stack(0xe8167b20 to 0xe8167b68) [ 31.982100] 7b20: e9d4bd80 00000cc0 000000cf 00000000 e9d4bd80 c1f38958 00000cc0 c1f38960 [ 31.990234] 7b40: 00000001 000000cf 00000004 e9dc0800 00000000 e8167b70 c0f478ec c0f46d94 [ 31.998363] 7b60: 60070013 ffffffff [ 32.001833] [<c0301a8c>] (__irq_svc) from [<c0f46d94>] (netlink_trim+0x18/0xd8) [ 32.009104] [<c0f46d94>] (netlink_trim) from [<c0f478ec>] (netlink_broadcast_filtered+0x34/0x414) [ 32.017930] [<c0f478ec>] (netlink_broadcast_filtered) from [<c0f47cec>] (netlink_broadcast+0x20/0x28) [ 32.027102] [<c0f47cec>] (netlink_broadcast) from [<c0eea378>] (rtnetlink_send+0x34/0x88) [ 32.035238] [<c0eea378>] (rtnetlink_send) from [<c0f25890>] (notify_and_destroy+0x2c/0x44) [ 32.043461] [<c0f25890>] (notify_and_destroy) from [<c0f25e08>] (qdisc_graft+0x398/0x470) [ 32.051595] [<c0f25e08>] (qdisc_graft) from [<c0f27a00>] (tc_modify_qdisc+0x3a4/0x724) [ 32.059470] [<c0f27a00>] (tc_modify_qdisc) from [<c0ee4c84>] (rtnetlink_rcv_msg+0x260/0x2ec) [ 32.067864] [<c0ee4c84>] (rtnetlink_rcv_msg) from [<c0f4a988>] (netlink_rcv_skb+0xb8/0x110) [ 32.076172] [<c0f4a988>] (netlink_rcv_skb) from [<c0f4a170>] (netlink_unicast+0x1b4/0x22c) [ 32.084392] [<c0f4a170>] (netlink_unicast) from [<c0f4a5e4>] (netlink_sendmsg+0x33c/0x380) [ 32.092614] [<c0f4a5e4>] (netlink_sendmsg) from [<c0ea9f40>] (sock_sendmsg+0x14/0x24) [ 32.100403] [<c0ea9f40>] (sock_sendmsg) from [<c0eaa780>] (___sys_sendmsg+0x214/0x228) [ 32.108279] [<c0eaa780>] (___sys_sendmsg) from [<c0eabad0>] (__sys_sendmsg+0x50/0x8c) [ 32.116068] [<c0eabad0>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 32.123938] Exception stack(0xe8167fa8 to 0xe8167ff0) [ 32.128960] 7fa0: b6fa68c8 000000f8 00000003 bea142d0 00000000 00000000 [ 32.137093] 7fc0: b6fa68c8 000000f8 0052154c 00000128 5d6468a2 00000000 00000028 00558c9c [ 32.145224] 7fe0: 00000070 bea14278 00530d64 b6e17e64 [ 32.150659] ---[ end trace 2139c9827c3e5177 ]--- This happens because the qdisc ->dequeue callback gets called. Which again is not illegal, the qdisc will dequeue even when the interface is up but doesn't have carrier (and hence SPEED_UNKNOWN), and the frames will be dropped further down the stack in dev_direct_xmit(). And, at the end of the day, for what? For calculating the initial budget of an interface which is non-operational at the moment and where frames will get dropped anyway. So if we can't figure out the link speed, default to SPEED_10 and move along. We can also remove the runtime check now. Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31taprio: Fix kernel panic in taprio_destroyVladimir Oltean1-4/+4
taprio_init may fail earlier than this line: list_add(&q->taprio_list, &taprio_list); i.e. due to the net device not being multi queue. Attempting to remove q from the global taprio_list when it is not part of it will result in a kernel panic. Fix it by matching list_add and list_del better to one another in the order of operations. This way we can keep the deletion unconditional and with lower complexity - O(1). Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31qede: Add support for dumping the grc data.Sudarsana Reddy Kalluru2-2/+28
This patch adds driver support for configuring grc dump config flags, and dumping the grc data via ethtool get/set-dump interfaces. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31qed: Add APIs for configuring grc dump config flags.Sudarsana Reddy Kalluru4-0/+127
The patch adds driver support for configuring the grc dump config flags. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31qede: Add support for reading the config id attributes.Sudarsana Reddy Kalluru2-0/+103
Add driver support for dumping the config id attributes via ethtool dump interfaces. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31qed: Add APIs for reading config id attributes.Sudarsana Reddy Kalluru4-0/+82
The patch adds driver support for reading the config id attributes from NVM flash partition. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.