| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit a3b80e107894 ("bpf: Allocate ID for bpf_link")
removed the implementation but not the declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230809140556.45836-1-yuehaibing@huawei.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
When gso.hdr_len is zero and a packet is transmitted via write() or
writev(), all payload is treated as header which requires a contiguous
memory allocation. This allocation request is harder to satisfy, and may
even fail if there is enough fragmentation.
Note that sendmsg() code path limits the linear copy length, so this change
makes write()/writev() and sendmsg() paths more consistent.
Signed-off-by: Tahsin Erdogan <trdgn@amazon.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230809164753.2247594-1-trdgn@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver init/exit() function don't do anything special, it
can use the module_pci_driver() macro to eliminate boilerplate
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230810014633.3084355-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 61c9fed41638 ("[SCTP]: A better solution to fix the race between sctp_peeloff()
and sctp_rcv().") removed the implementation but left declaration in place. Remove it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230809142323.9428-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 43e369210108 ("caif: Move refcount from service layer to sock and dev.")
declared but never implemented this.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809134943.37844-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit abe80fdc6ee6 ("net: stmmac: RX queue routing configuration")
introduced RX queue routing to DWMAC4 core.
This patch extend the support to XGMAC2 core.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809020238.1136732-1-0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure that the offloading of blinking is stopped when the trigger is
deactivated. Calling led_set_brightness() is documented as stopping
offload and setting the LED to a constant brightness.
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-5-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the code needed to indicate if a given blinking pattern can be
offloaded, to offload a pattern and to try to return the current
pattern.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-4-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Linux LEDs can be requested to perform hardware accelerated blinking
to indicate link, RX, TX etc. Pass the rules for blinking to the PHY
driver, if it implements the ops needed to determine if a given
pattern can be offloaded, to offload it, and what the current offload
is. Additionally implement the op needed to get what device the LED is
for.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-3-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the netdev trigger is activates, it tries to determine what
device the LED blinks for, and what the current blink mode is.
The documentation for hw_control_get() says:
* Return 0 on success, a negative error number on failing parsing the
* initial mode. Error from this function is NOT FATAL as the device
* may be in a not supported initial state by the attached LED trigger.
*/
For the Marvell PHY and the Armada 370-rd board, the initial LED blink
mode is not supported by the trigger, so it returns an error. This
resulted in not getting the device the LED is blinking for. As a
result, the device is unknown and offloaded is never performed.
Change to condition to always get the device if offloading is
supported, and reduce the scope of testing for an error from
hw_control_get() to skip setting trigger internal state if there is an
error.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-2-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The module_mhi_driver() will set "THIS_MODULE" to driver.owner when
register a mhi_driver driver, so it is redundant initialization to set
driver.owner in the statement. Remove it for clean code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230808021238.2975585-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When using a fixed-link setup, certain devices like the SJA1105 require a
small pause in the TXC clock line to enable their internal tunable
delay line (TDL).
To satisfy this requirement, this patch temporarily disables the TX clock,
and restarts it after a required period. This provides the required
silent interval on the clock line for SJA1105 to complete the frequency
transition and enable the internal TDLs. This action occurs before the link
is built up, so it does not impact a normal device too. There is no
need to identify if the connected device is an SJA1105 alike or not during
the implementation.
So far we have only enabled this feature on the i.MX93 platform.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Frank Li <frank.li@nxp.com>
Link: https://lore.kernel.org/r/20230807160716.259072-3-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A mode parameter has been added to the callback function of fix_mac_speed
to indicate the physical layer type.
The mode can be one the following:
MLO_AN_PHY - Conventional PHY
MLO_AN_FIXED - Fixed-link mode
MLO_AN_INBAND - In-band protocol
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20230807160716.259072-2-shenwei.wang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some
items to a string for content, and we add '\n' and '\0' in the last
two bytes of content.
strscpy() will add '\0' in the last byte of destination buffer(one of
items), it result in finishing content print ahead of schedule and some
dump content truncation.
One Error log shows as below:
cat mac_list/uc
UC MAC_LIST:
Expected:
UC MAC_LIST:
FUNC_ID MAC_ADDR STATE
pf 00:2b:19:05:03:00 ACTIVE
The destination buffer is length-bounded and not required to be
NUL-terminated, so just change strscpy() to memcpy() to fix it.
Fixes: 1cf3d5567f27 ("net: hns3: fix strncpy() not using dest-buf length as length issue")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20230809020902.1941471-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We used to change the flags for the last segment, because
non-last segments had the MSG_SENDPAGE_NOTLAST flag set.
That flag is no longer a thing so remove the setting.
Since flags most likely don't have MSG_SPLICE_PAGES set
this avoids passing parts of the sg as splice and parts
as non-splice. Before commit under Fixes we'd have called
tcp_sendpage() which would add the MSG_SPLICE_PAGES.
Why this leads to trouble remains unclear but Tariq
reports hitting the WARN_ON(!sendpage_ok()) due to
page refcount of 0.
Fixes: e117dcfd646e ("tls: Inline do_tcp_sendpages()")
Reported-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/all/4c49176f-147a-4283-f1b1-32aac7b4b996@gmail.com/
Tested-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20230808180917.1243540-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a login request fails, the recovery process should be protected
against parallel resets. It is a known issue that freeing and
registering CRQ's in quick succession can result in a failover CRQ from
the VIOS. Processing a failover during login recovery is dangerous for
two reasons:
1. This will result in two parallel initialization processes, this can
cause serious issues during login.
2. It is possible that the failover CRQ is received but never executed.
We get notified of a pending failover through a transport event CRQ.
The reset is not performed until a INIT CRQ request is received.
Previously, if CRQ init fails during login recovery, then the ibmvnic
irq is freed and the login process returned error. If failover_pending
is true (a transport event was received), then the ibmvnic device
would never be able to process the reset since it cannot receive the
CRQ_INIT request due to the irq being freed. This leaved the device
in a inoperable state.
Therefore, the login failure recovery process must be hardened against
these possible issues. Possible failovers (due to quick CRQ free and
init) must be avoided and any issues during re-initialization should be
dealt with instead of being propagated up the stack. This logic is
similar to that of ibmvnic_probe().
Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-5-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Perform a partial reset before sending a login request if any of the
following are true:
1. If a previous request times out. This can be dangerous because the
VIOS could still receive the old login request at any point after
the timeout. Therefore, it is best to re-register the CRQ's and
sub-CRQ's before retrying.
2. If the previous request returns an error that is not described in
PAPR. PAPR provides procedures if the login returns with partial
success or aborted return codes (section L.5.1) but other values
do not have a defined procedure. Previously, these conditions
just returned error from the login function rather than trying
to resolve the issue.
This can cause further issues since most callers of the login
function are not prepared to handle an error when logging in. This
improper cleanup can lead to the device being permanently DOWN'd.
For example, if the VIOS believes that the device is already logged
in then it will return INVALID_STATE (-7). If we never re-register
CRQ's then it will always think that the device is already logged
in. This leaves the device inoperable.
The partial reset involves freeing the sub-CRQs, freeing the CRQ then
registering and initializing a new CRQ and sub-CRQs. This essentially
restarts all communication with VIOS to allow for a fresh login attempt
that will be unhindered by any previous failed attempts.
Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-4-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than leaving the DMA unmapping of the login buffers to the
login response handler, move this work into the login release functions.
Previously, these functions were only used for freeing the allocated
buffers. This could lead to issues if there are more than one
outstanding login buffer requests, which is possible if a login request
times out.
If a login request times out, then there is another call to send login.
The send login function makes a call to the login buffer release
function. In the past, this freed the buffers but did not DMA unmap.
Therefore, the VIOS could still write to the old login (now freed)
buffer. It is for this reason that it is a good idea to leave the DMA
unmap call to the login buffers release function.
Since the login buffer release functions now handle DMA unmapping,
remove the duplicate DMA unmapping in handle_login_rsp().
Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-3-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the LOGIN CRQ fails to send then we must DMA unmap the response
buffer. Previously, if the CRQ failed then the memory was freed without
DMA unmapping.
Fixes: c98d9cc4170d ("ibmvnic: send_login should check for crq errors")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-2-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure that all offsets in a login response buffer are within the size
of the allocated response buffer. Any offsets or lengths that surpass
the allocation are likely the result of an incomplete response buffer.
In these cases, a full reset is necessary.
When attempting to login, the ibmvnic device will allocate a response
buffer and pass a reference to the VIOS. The VIOS will then send the
ibmvnic device a LOGIN_RSP CRQ to signal that the buffer has been filled
with data. If the ibmvnic device does not get a response in 20 seconds,
the old buffer is freed and a new login request is sent. With 2
outstanding requests, any LOGIN_RSP CRQ's could be for the older
login request. If this is the case then the login response buffer (which
is for the newer login request) could be incomplete and contain invalid
data. Therefore, we must enforce strict sanity checks on the response
buffer values.
Testing has shown that the `off_rxadd_buff_size` value is filled in last
by the VIOS and will be the smoking gun for these circumstances.
Until VIOS can implement a mechanism for tracking outstanding response
buffers and a method for mapping a LOGIN_RSP CRQ to a particular login
response buffer, the best ibmvnic can do in this situation is perform a
full reset.
Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When unloading the MANA driver, mana_dealloc_queues() waits for the MANA
hardware to complete any inflight packets and set the pending send count
to zero. But if the hardware has failed, mana_dealloc_queues()
could wait forever.
Fix this by adding a timeout to the wait. Set the timeout to 120 seconds,
which is a somewhat arbitrary value that is more than long enough for
functional hardware to complete any sends.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Link: https://lore.kernel.org/r/1691576525-24271-1-git-send-email-schakrabarti@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The declaration got placed in the .c file of the caller, but that
causes a warning for the definition:
arch/x86/kernel/cpu/bugs.c:682:6: error: no previous prototype for 'gds_ucode_mitigated' [-Werror=missing-prototypes]
Move it to a header where both sides can observe it instead.
Fixes: 81ac7e5d74174 ("KVM: Add GDS_NO support to KVM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/20230809130530.1913368-2-arnd%40kernel.org
|
|
The newly added function has two definitions but no prototypes:
drivers/base/cpu.c:605:16: error: no previous prototype for 'cpu_show_gds' [-Werror=missing-prototypes]
Add a declaration next to the other ones for this file to avoid the
warning.
Fixes: 8974eb588283b ("x86/speculation: Add Gather Data Sampling mitigation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/20230809130530.1913368-1-arnd%40kernel.org
|
|
Fix a -Wmissing-prototypes warning and add the gather_data_sampling()
stub macro call for real.
Fixes: 0fddfe338210 ("driver core: cpu: Unify redundant silly stubs")
Closes: https://lore.kernel.org/oe-kbuild-all/202308101956.oRj1ls7s-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/202308101956.oRj1ls7s-lkp@intel.com
|
|
The assertion added to verify the difference in bits set of the
addresses of srso_untrain_ret_alias() and srso_safe_ret_alias() would fail
to link in LLVM's ld.lld linker with the following error:
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:210: at least one side of
the expression must be absolute
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:211: at least one side of
the expression must be absolute
Use ABSOLUTE to evaluate the expression referring to at least one of the
symbols so that LLD can evaluate the linker script.
Also, add linker version info to the comment about XOR being unsupported
in either ld.bfd or ld.lld until somewhat recently.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Closes: https://lore.kernel.org/llvm/CA+G9fYsdUeNu-gwbs0+T6XHi4hYYk=Y9725-wFhZ7gJMspLDRA@mail.gmail.com/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Daniel Kolesa <daniel@octaforge.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Sven Volkinsfeld <thyrc@gmx.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://github.com/ClangBuiltLinux/linux/issues/1907
Link: https://lore.kernel.org/r/20230809-gds-v1-1-eaac90b0cbcc@google.com
|
|
Add a note about the dependency of the User->User mitigation on the
previous Spectre v2 IBPB selection.
Make the layout moar pretty.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230809102700.29449-4-bp@alien8.de
|
|
Make them all a weak function, aliasing to a single function which
issues the "Not affected" string.
No functional changes.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20230809102700.29449-3-bp@alien8.de
|
|
Most of the index.rst files in Documentation/ refer to other rst files
without their file extension in the name. Do that here too.
No functional changes.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230809102700.29449-2-bp@alien8.de
|
|
Ditch it, it has been replace it by the GC transaction API and it has no
clients anymore.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Set on the NFT_SET_ELEM_DEAD_BIT flag on this element, instead of
performing element removal which might race with an ongoing transaction.
Enable gc when dynamic flag is set on since dynset deletion requires
garbage collection after this patch.
Fixes: d0a8d877da97 ("netfilter: nft_dynset: support for element deletion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use the GC transaction API to replace the old and buggy gc API and the
busy mark approach.
No set elements are removed from async garbage collection anymore,
instead the _DEAD bit is set on so the set element is not visible from
lookup path anymore. Async GC enqueues transaction work that might be
aborted and retried later.
rbtree and pipapo set backends does not set on the _DEAD bit from the
sync GC path since this runs in control plane path where mutex is held.
In this case, set elements are deactivated, removed and then released
via RCU callback, sync GC never fails.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support")
Fixes: 9d0982927e79 ("netfilter: nft_hash: add support for timeouts")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The set types rhashtable and rbtree use a GC worker to reclaim memory.
From system work queue, in periodic intervals, a scan of the table is
done.
The major caveat here is that the nft transaction mutex is not held.
This causes a race between control plane and GC when they attempt to
delete the same element.
We cannot grab the netlink mutex from the work queue, because the
control plane has to wait for the GC work queue in case the set is to be
removed, so we get following deadlock:
cpu 1 cpu2
GC work transaction comes in , lock nft mutex
`acquire nft mutex // BLOCKS
transaction asks to remove the set
set destruction calls cancel_work_sync()
cancel_work_sync will now block forever, because it is waiting for the
mutex the caller already owns.
This patch adds a new API that deals with garbage collection in two
steps:
1) Lockless GC of expired elements sets on the NFT_SET_ELEM_DEAD_BIT
so they are not visible via lookup. Annotate current GC sequence in
the GC transaction. Enqueue GC transaction work as soon as it is
full. If ruleset is updated, then GC transaction is aborted and
retried later.
2) GC work grabs the mutex. If GC sequence has changed then this GC
transaction lost race with control plane, abort it as it contains
stale references to objects and let GC try again later. If the
ruleset is intact, then this GC transaction deactivates and removes
the elements and it uses call_rcu() to destroy elements.
Note that no elements are removed from GC lockless path, the _DEAD bit
is set and pointers are collected. GC catchall does not remove the
elements anymore too. There is a new set->dead flag that is set on to
abort the GC transaction to deal with set->ops->destroy() path which
removes the remaining elements in the set from commit_release, where no
mutex is held.
To deal with GC when mutex is held, which allows safe deactivate and
removal, add sync GC API which releases the set element object via
call_rcu(). This is used by rbtree and pipapo backends which also
perform garbage collection from control plane path.
Since element removal from sets can happen from control plane and
element garbage collection/timeout, it is necessary to keep the set
structure alive until all elements have been deactivated and destroyed.
We cannot do a cancel_work_sync or flush_work in nft_set_destroy because
its called with the transaction mutex held, but the aforementioned async
work queue might be blocked on the very mutex that nft_set_destroy()
callchain is sitting on.
This gives us the choice of ABBA deadlock or UaF.
To avoid both, add set->refs refcount_t member. The GC API can then
increment the set refcount and release it once the elements have been
free'd.
Set backends are adapted to use the GC transaction API in a follow up
patch entitled:
("netfilter: nf_tables: use gc transaction API in set backends")
This is joint work with Florian Westphal.
Fixes: cfed7e1b1f8e ("netfilter: nf_tables: add set garbage collection helpers")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a test case to check whether sockmap redirection works correctly
when data length returned by stream_parser is less than skb->len.
In addition, this test checks whether strp_done is called correctly.
The reason is that we returns skb->len - 1 from the stream_parser, so
the last byte in the skb will be held by strp->skb_head. Therefore,
if strp_done is not called to free strp->skb_head, we'll get a memleak
warning.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-5-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
BPF CI has reported the following failure:
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: ingress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1514: ingress: recv() err, errno=11
vsock_unix_redir_connectible:FAIL:1514
./test_progs:vsock_unix_redir_connectible:1518: ingress: vsock socket map failed, a != b
vsock_unix_redir_connectible:FAIL:1518
./test_progs:vsock_unix_redir_connectible:1525: ingress: want pass count 1, have 0
It’s because the recv(... MSG_DONTWAIT) syscall in the test case is
called before the queued work sk_psock_backlog() in the kernel finishes
executing. So the data to be read is still queued in psock->ingress_skb
and cannot be read by the user program. Therefore, the non-blocking
recv() reads nothing and reports an EAGAIN error.
So replace recv(... MSG_DONTWAIT) with xrecv_nonblock(), which calls
select() to wait for data to be readable or timeout before calls recv().
Fixes: d61bd8c1fd02 ("selftests/bpf: add a test case for vsock sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-4-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
strp_done is only called when psock->progs.stream_parser is not NULL,
but stream_parser was set to NULL by sk_psock_stop_strp(), called
by sk_psock_drop() earlier. So, strp_done can never be called.
Introduce SK_PSOCK_RX_ENABLED to mark whether there is strp on psock.
Change the condition for calling strp_done from judging whether
stream_parser is set to judging whether this flag is set. This flag is
only set once when strp_init() succeeds, and will never be cleared later.
Fixes: c0d95d3380ee ("bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230804073740.194770-3-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
sock_map_del_link() operates on both SOCKMAP and SOCKHASH, although
both types have member named "progs", the offset of "progs" member in
these two types is different, so "progs" should be accessed with the
real map type.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230804073740.194770-2-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Fix a refcount underflow problem reported by syzbot that can happen
when a system is running out of memory. If xp_alloc_tx_descs() fails,
and it can only fail due to not having enough memory, then the error
path is triggered. In this error path, the refcount of the pool is
decremented as it has incremented before. However, the reference to
the pool in the socket was not nulled. This means that when the socket
is closed later, the socket teardown logic will think that there is a
pool attached to the socket and try to decrease the refcount again,
leading to a refcount underflow.
I chose this fix as it involved adding just a single line. Another
option would have been to move xp_get_pool() and the assignment of
xs->pool to after the if-statement and using xs_umem->pool instead of
xs->pool in the whole if-statement resulting in somewhat simpler code,
but this would have led to much more churn in the code base perhaps
making it harder to backport.
Fixes: ba3beec2ec1d ("xsk: Fix possible crash when multiple sockets are created")
Reported-by: syzbot+8ada0057e69293a05fd4@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230809142843.13944-1-magnus.karlsson@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The reason behind commit af7b29b1deaa ("Revert "net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"") was that the
patch it reverted caused a crash when attaching a CBS shaper to one of
the taprio classes. Prevent that from happening again by adding a test
case for it, which now passes correctly in both offload and software
modes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-12-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check that the "Can only be attached as root qdisc" error message from
taprio is effective by attempting to attach it to a class of another
taprio qdisc. That operation should fail.
In the bug that was squashed by change "net/sched: taprio: try again to
report q->qdiscs[] to qdisc_leaf()", grafting a child taprio to a root
software taprio would be misinterpreted as a change() to the root
taprio. Catch this by looking at whether the base-time of the root
taprio has changed to follow the base-time of the child taprio,
something which should have absolutely never happened assuming correct
semantics.
Vinicius points out that looking at "base_time" in the tc qdisc show
output is unreliable because user space is in a race with the kernel
applying the setting. So we create a helper bash script which waits
while there is any pending schedule.
Link: https://lore.kernel.org/netdev/87il9w0xx7.fsf@intel.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-11-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For offloaded tc-taprio testing with netdevsim, the mock-up PHC driver
is used.
Suggested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-10-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To be able to use netdevsim for tc-testing with an offloaded tc-taprio
schedule, it needs to report a PTP clock (which it now does), and to
accept ndo_setup_tc(TC_SETUP_QDISC_TAPRIO) calls.
Since netdevsim has no packet I/O, this doesn't do anything intelligent,
it only allows taprio offload code paths to go through some level of
automated testing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-9-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I'd like to make netdevsim offload tc-taprio, but currently, this Qdisc
emits a ETHTOOL_GET_TS_INFO call to the driver to make sure that it has
a PTP clock, so that it is reasonably capable of offloading the schedule.
By using the mock PHC driver, that becomes possible.
Hardware timestamping is not necessary, and netdevsim does not support
packet I/O anyway.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-8-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are several cases where virtual net devices may benefit from
having a PTP clock, and these have to do with testing. I can see at
least netdevsim and veth as potential users of a common mock-up PTP
hardware clock driver.
The proposed idea is to create an object which emulates PTP clock
operations on top of the unadjustable CLOCK_MONOTONIC_RAW plus a
software-controlled time domain via a timecounter/cyclecounter and then
link that PHC to the netdevsim device.
The driver is fully functional for its intended purpose, and it
successfully passes the PTP selftests.
$ cd tools/testing/selftests/ptp/
$ ./phc.sh /dev/ptp2
TEST: settime [ OK ]
TEST: adjtime [ OK ]
TEST: adjfreq [ OK ]
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This makes a difference for the software scheduling mode, where
dev_queue->qdisc_sleeping is the same as the taprio root Qdisc itself,
but when we're talking about what Qdisc and stats get reported for a
traffic class, the root taprio isn't what comes to mind, but q->qdiscs[]
is.
To understand the difference, I've attempted to send 100 packets in
software mode through class 8001:5, and recorded the stats before and
after the change.
Here is before:
$ tc -s class show dev eth0
class taprio 8001:1 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:2 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:3 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:4 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:5 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:6 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:7 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:8 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
and here is after:
class taprio 8001:1 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:2 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:3 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:4 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:5 root
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:6 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:7 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:8 root leaf 800d:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
The most glaring (and expected) difference is that before, all class
stats reported the global stats, whereas now, they really report just
the counters for that traffic class.
Finally, Pedro Tammela points out that there is a tc selftest which
checks specifically which handle do the child Qdiscs corresponding to
each class have. That's changing here - taprio no longer reports
tcm->tcm_info as the same handle "1:" as itself (the root Qdisc), but 0
(the handle of the default pfifo child Qdiscs). Since iproute2 does not
print a child Qdisc handle of 0, adjust the test's expected output.
Link: https://lore.kernel.org/netdev/3b83fcf6-a5e8-26fb-8c8a-ec34ec4c3342@mojatatu.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As mentioned in commit af7b29b1deaa ("Revert "net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"") - unlike
mqprio, taprio doesn't use q->qdiscs[] only as a temporary transport
between Qdisc_ops :: init() and Qdisc_ops :: attach().
Delete the comment, which is just stolen from mqprio, but there, the
usage patterns are a lot different, and this is nothing but confusing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is another stab at commit 1461d212ab27 ("net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"), later
reverted in commit af7b29b1deaa ("Revert "net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"").
I believe that the problems that caused the revert were fixed, and thus,
this change is identical to the original patch.
Its purpose is to properly reject attaching a software taprio child
qdisc to a software taprio parent. Because unoffloaded taprio currently
reports itself (the root Qdisc) as the return value from qdisc_leaf(),
then the process of attaching another taprio as child to a Qdisc class
of the root will just result in a Qdisc_ops :: change() call for the
root. Whereas that's not we want. We want Qdisc_ops :: init() to be
called for the taprio child, in order to give the taprio child a chance
to check whether its sch->parent is TC_H_ROOT or not (and reject this
configuration).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Normally, Qdiscs have one reference on them held by their owner and one
held for each TXQ to which they are attached, however this is not the
case with the children of an offloaded taprio. Instead, the taprio qdisc
currently lives in the following fragile equilibrium.
In the software scheduling case, taprio attaches itself (the root Qdisc)
to all TXQs, thus having a refcount of 1 + the number of TX queues. In
this mode, the q->qdiscs[] children are not visible directly to the
Qdisc API. The lifetime of the Qdiscs from this private array lasts
until qdisc_destroy() -> taprio_destroy().
In the fully offloaded case, the root taprio has a refcount of 1, and
all child q->qdiscs[] also have a refcount of 1. The child q->qdiscs[]
are attached to the netdev TXQs directly and thus are visible to the
Qdisc API, however taprio loses a reference to them very early - during
qdisc_graft(parent==NULL) -> taprio_attach(). At that time, taprio frees
the q->qdiscs[] array to not leak memory, but interestingly, it does not
release a reference on these qdiscs because it doesn't effectively own
them - they are created by taprio but owned by the Qdisc core, and will
be freed by qdisc_graft(parent==NULL, new==NULL) -> qdisc_put(old) when
the Qdisc is deleted or when the child Qdisc is replaced with something
else.
My interest is to change this equilibrium such that taprio also owns a
reference on the q->qdiscs[] child Qdiscs for the lifetime of the root
Qdisc, including in full offload mode. I want this because I would like
taprio_leaf(), taprio_dump_class(), taprio_dump_class_stats() to have
insight into q->qdiscs[] for the software scheduling mode - currently
they look at dev_queue->qdisc_sleeping, which is, as mentioned, the same
as the root taprio.
The following set of changes is necessary:
- don't free q->qdiscs[] early in taprio_attach(), free it late in
taprio_destroy() for consistency with software mode. But:
- currently that's not possible, because taprio doesn't own a reference
on q->qdiscs[]. So hold that reference - once during the initial
attach() and once during subsequent graft() calls when the child is
changed.
- always keep track of the current child in q->qdiscs[], even for full
offload mode, so that we free in taprio_destroy() what we should, and
not something stale.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a simple code transformation with no intended behavior change,
just to make it absolutely clear that q->qdiscs[] is only attached to
the child taprio classes in full offload mode.
Right now we use the q->qdiscs[] variable in taprio_attach() for
software mode too, but that is quite confusing and avoidable. We use
it only to reach the netdev TX queue, but we could as well just use
netdev_get_tx_queue() for that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose NIC temperature by implementing hwmon kernel API, which turns
current thermal zone kernel API to redundant.
For each one of the supported and exposed thermal diode sensors, expose
the following attributes:
1) Input temperature.
2) Highest temperature.
3) Temperature label:
Depends on the firmware capability, if firmware doesn't support
sensors naming, the fallback naming convention would be: "sensorX",
where X is the HW spec (MTMP register) sensor index.
4) Temperature critical max value:
refers to the high threshold of Warning Event. Will be exposed as
`tempY_crit` hwmon attribute (RO attribute). For example for
ConnectX5 HCA's this temperature value will be 105 Celsius, 10
degrees lower than the HW shutdown temperature).
5) Temperature reset history: resets highest temperature.
For example, for dualport ConnectX5 NIC with a single IC thermal diode
sensor will have 2 hwmon directories (one for each PCI function)
under "/sys/class/hwmon/hwmon[X,Y]".
Listing one of the directories above (hwmonX/Y) generates the
corresponding output below:
$ grep -H -d skip . /sys/class/hwmon/hwmon0/*
Output
=======================================================================
/sys/class/hwmon/hwmon0/name:mlx5
/sys/class/hwmon/hwmon0/temp1_crit:105000
/sys/class/hwmon/hwmon0/temp1_highest:48000
/sys/class/hwmon/hwmon0/temp1_input:46000
/sys/class/hwmon/hwmon0/temp1_label:asic
grep: /sys/class/hwmon/hwmon0/temp1_reset_history: Permission denied
In addition, displaying the sensors data via lm_sensors generates the
corresponding output below:
$ sensors
Output
=======================================================================
mlx5-pci-0800
Adapter: PCI adapter
asic: +46.0°C (crit = +105.0°C, highest = +48.0°C)
mlx5-pci-0801
Adapter: PCI adapter
asic: +46.0°C (crit = +105.0°C, highest = +48.0°C)
CC: Jean Delvare <jdelvare@suse.com>
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807180507.22984-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make mlx5_query_module_num() defined in port.c, a non-static, so it can
be used by other files.
CC: Jean Delvare <jdelvare@suse.com>
CC: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807180507.22984-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Yue Haibing
Tahsin Erdogan
Yang Yingliang
Furong Xu
Andrew Lunn
Li Zetao
Shenwei Wang
Hao Chen
Jakub Kicinski
Nick Child
Souradeep Chakrabarti
Arnd Bergmann
Borislav Petkov (AMD)
Nick Desaulniers
Pablo Neira Ayuso
Xu Kuohai
Magnus Karlsson
Vladimir Oltean
Adham Faris