aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/exported-sql-viewer.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2023-10-27mptcp: userspace pm send RM_ADDR for ID 0Geliang Tang1-0/+39
This patch adds the ability to send RM_ADDR for local ID 0. Check whether id 0 address is removed, if not, put id 0 into a removing list, pass it to mptcp_pm_remove_addr() to remove id 0 address. There is no reason not to allow the userspace to remove the initial address (ID 0). This special case was not taken into account not letting the userspace to delete all addresses as announced. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/379 Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-3-db8f25f798eb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-27selftests: mptcp: fix wait_rm_addr/sf parametersGeliang Tang1-4/+10
The second input parameter of 'wait_rm_addr/sf $1 1' is misused. If it's 1, wait_rm_addr/sf will never break, and will loop ten times, then 'wait_rm_addr/sf' equals to 'sleep 1'. This delay time is too long, which can sometimes make the tests fail. A better way to use wait_rm_addr/sf is to use rm_addr/sf_count to obtain the current value, and then pass into wait_rm_addr/sf. Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable@vger.kernel.org Suggested-by: Matthieu Baerts <matttbe@kernel.org> Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-2-db8f25f798eb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-27selftests: mptcp: run userspace pm tests slowerGeliang Tang1-2/+2
Some userspace pm tests failed are reported by CI: 112 userspace pm add & remove address syn [ ok ] synack [ ok ] ack [ ok ] add [ ok ] echo [ ok ] mptcp_info subflows=1:1 [ ok ] subflows_total 2:2 [ ok ] mptcp_info add_addr_signal=1:1 [ ok ] rm [ ok ] rmsf [ ok ] Info: invert mptcp_info subflows=0:0 [ ok ] subflows_total 1:1 [fail] got subflows 0:0 expected 1:1 Server ns stats TcpPassiveOpens 2 0.0 TcpInSegs 118 0.0 This patch fixes them by changing 'speed' to 5 to run the tests much more slowly. Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-1-db8f25f798eb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-27net: selftests: use ethtool_sprintf()Jakub Kicinski1-6/+3
During a W=1 build GCC 13.2 says: net/core/selftests.c: In function ‘net_selftest_get_strings’: net/core/selftests.c:404:52: error: ‘%s’ directive output may be truncated writing up to 279 bytes into a region of size 28 [-Werror=format-truncation=] 404 | snprintf(p, ETH_GSTRING_LEN, "%2d. %s", i + 1, | ^~ net/core/selftests.c:404:17: note: ‘snprintf’ output between 5 and 284 bytes into a destination of size 32 404 | snprintf(p, ETH_GSTRING_LEN, "%2d. %s", i + 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 405 | net_selftests[i].name); | ~~~~~~~~~~~~~~~~~~~~~~ avoid it by using ethtool_sprintf(). Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20231026022916.566661-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-27net: bridge: fill in MODULE_DESCRIPTION()Nikolay Aleksandrov1-0/+1
Fill in bridge's module description. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27virtio_net: use u64_stats_t infra to avoid data-racesEric Dumazet1-59/+65
syzbot reported a data-race in virtnet_poll / virtnet_stats [1] u64_stats_t infra has very nice accessors that must be used to avoid potential load-store tearing. [1] BUG: KCSAN: data-race in virtnet_poll / virtnet_stats read-write to 0xffff88810271b1a0 of 8 bytes by interrupt on cpu 0: virtnet_receive drivers/net/virtio_net.c:2102 [inline] virtnet_poll+0x6c8/0xb40 drivers/net/virtio_net.c:2148 __napi_poll+0x60/0x3b0 net/core/dev.c:6527 napi_poll net/core/dev.c:6594 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6727 __do_softirq+0xc1/0x265 kernel/softirq.c:553 invoke_softirq kernel/softirq.c:427 [inline] __irq_exit_rcu kernel/softirq.c:632 [inline] irq_exit_rcu+0x3b/0x90 kernel/softirq.c:644 common_interrupt+0x7f/0x90 arch/x86/kernel/irq.c:247 asm_common_interrupt+0x26/0x40 arch/x86/include/asm/idtentry.h:636 __sanitizer_cov_trace_const_cmp8+0x0/0x80 kernel/kcov.c:306 jbd2_write_access_granted fs/jbd2/transaction.c:1174 [inline] jbd2_journal_get_write_access+0x94/0x1c0 fs/jbd2/transaction.c:1239 __ext4_journal_get_write_access+0x154/0x3f0 fs/ext4/ext4_jbd2.c:241 ext4_reserve_inode_write+0x14e/0x200 fs/ext4/inode.c:5745 __ext4_mark_inode_dirty+0x8e/0x440 fs/ext4/inode.c:5919 ext4_evict_inode+0xaf0/0xdc0 fs/ext4/inode.c:299 evict+0x1aa/0x410 fs/inode.c:664 iput_final fs/inode.c:1775 [inline] iput+0x42c/0x5b0 fs/inode.c:1801 do_unlinkat+0x2b9/0x4f0 fs/namei.c:4405 __do_sys_unlink fs/namei.c:4446 [inline] __se_sys_unlink fs/namei.c:4444 [inline] __x64_sys_unlink+0x30/0x40 fs/namei.c:4444 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88810271b1a0 of 8 bytes by task 2814 on cpu 1: virtnet_stats+0x1b3/0x340 drivers/net/virtio_net.c:2564 dev_get_stats+0x6d/0x860 net/core/dev.c:10511 rtnl_fill_stats+0x45/0x320 net/core/rtnetlink.c:1261 rtnl_fill_ifinfo+0xd0e/0x1120 net/core/rtnetlink.c:1867 rtnl_dump_ifinfo+0x7f9/0xc20 net/core/rtnetlink.c:2240 netlink_dump+0x390/0x720 net/netlink/af_netlink.c:2266 netlink_recvmsg+0x425/0x780 net/netlink/af_netlink.c:1992 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] ____sys_recvmsg+0x156/0x310 net/socket.c:2760 ___sys_recvmsg net/socket.c:2802 [inline] __sys_recvmsg+0x1ea/0x270 net/socket.c:2832 __do_sys_recvmsg net/socket.c:2842 [inline] __se_sys_recvmsg net/socket.c:2839 [inline] __x64_sys_recvmsg+0x46/0x50 net/socket.c:2839 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x000000000045c334 -> 0x000000000045c376 Fixes: 3fa2a1df9094 ("virtio-net: per cpu 64 bit stats (v2)") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27selftests: vxlan_mdb: Use MDB get instead of dumpIdo Schimmel1-54/+54
Test the new MDB get functionality by converting dump and grep to MDB get. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27selftests: bridge_mdb: Use MDB get instead of dumpIdo Schimmel1-113/+71
Test the new MDB get functionality by converting dump and grep to MDB get. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27rtnetlink: Add MDB get supportIdo Schimmel1-1/+88
Now that both the bridge and VXLAN drivers implement the MDB get net device operation, expose the functionality to user space by registering a handler for RTM_GETMDB messages. Derive the net device from the ifindex specified in the ancillary header and invoke its MDB get NDO. Note that unlike other get handlers, the allocation of the skb containing the response is not performed in the common rtnetlink code as the size is variable and needs to be determined by the respective driver. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27vxlan: mdb: Add MDB get supportIdo Schimmel3-0/+153
Implement support for MDB get operation by looking up a matching MDB entry, allocating the skb according to the entry's size and then filling in the response. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27bridge: mcast: Add MDB get supportIdo Schimmel3-0/+168
Implement support for MDB get operation by looking up a matching MDB entry, allocating the skb according to the entry's size and then filling in the response. The operation is performed under the bridge multicast lock to ensure that the entry does not change between the time the reply size is determined and when the reply is filled in. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net: Add MDB get device operationIdo Schimmel1-0/+4
Add MDB net device operation that will be invoked by rtnetlink code in response to received RTM_GETMDB messages. Subsequent patches will implement the operation in the bridge and VXLAN drivers. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27bridge: add MDB get uAPI attributesIdo Schimmel1-0/+18
Add MDB get attributes that correspond to the MDB set attributes used in RTM_NEWMDB messages. Specifically, add 'MDBA_GET_ENTRY' which will hold a 'struct br_mdb_entry' and 'MDBA_GET_ENTRY_ATTRS' which will hold 'MDBE_ATTR_*' attributes that are used as indexes (source IP and source VNI). An example request will look as follows: [ struct nlmsghdr ] [ struct br_port_msg ] [ MDBA_GET_ENTRY ] struct br_mdb_entry [ MDBA_GET_ENTRY_ATTRS ] [ MDBE_ATTR_SOURCE ] struct in_addr / struct in6_addr [ MDBE_ATTR_SRC_VNI ] u32 Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27vxlan: mdb: Factor out a helper for remote entry size calculationIdo Schimmel1-9/+19
Currently, netlink notifications are sent for individual remote entries and not for the entire MDB entry itself. Subsequent patches are going to add MDB get support which will require the VXLAN driver to reply with an entire MDB entry. Therefore, as a preparation, factor out a helper to calculate the size of an individual remote entry. When determining the size of the reply this helper will be invoked for each remote entry in the MDB entry. No functional changes intended. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27vxlan: mdb: Adjust function argumentsIdo Schimmel1-6/+4
Adjust the function's arguments and rename it to allow it to be reused by future call sites that only have access to 'struct vxlan_mdb_entry_key', but not to 'struct vxlan_mdb_config'. No functional changes intended. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27bridge: mcast: Rename MDB entry get functionIdo Schimmel4-8/+11
The current name is going to conflict with the upcoming net device operation for the MDB get operation. Rename the function to br_mdb_entry_skb_get(). No functional changes intended. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27bridge: mcast: Factor out a helper for PG entry size calculationIdo Schimmel1-7/+13
Currently, netlink notifications are sent for individual port group entries and not for the entire MDB entry itself. Subsequent patches are going to add MDB get support which will require the bridge driver to reply with an entire MDB entry. Therefore, as a preparation, factor out an helper to calculate the size of an individual port group entry. When determining the size of the reply this helper will be invoked for each port group entry in the MDB entry. No functional changes intended. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27bridge: mcast: Account for missing attributesIdo Schimmel1-4/+11
The 'MDBA_MDB' and 'MDBA_MDB_ENTRY' nest attributes are not accounted for when calculating the size of MDB notifications. Add them along with comments for existing attributes. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27bridge: mcast: Dump MDB entries even when snooping is disabledIdo Schimmel1-3/+0
Currently, the bridge driver does not dump MDB entries when multicast snooping is disabled although the entries are present in the kernel: # bridge mdb add dev br0 port swp1 grp 239.1.1.1 permanent # bridge mdb show dev br0 dev br0 port swp1 grp 239.1.1.1 permanent dev br0 port br0 grp ff02::6a temp dev br0 port br0 grp ff02::1:ff9d:e61b temp # ip link set dev br0 type bridge mcast_snooping 0 # bridge mdb show dev br0 # ip link set dev br0 type bridge mcast_snooping 1 # bridge mdb show dev br0 dev br0 port swp1 grp 239.1.1.1 permanent dev br0 port br0 grp ff02::6a temp dev br0 port br0 grp ff02::1:ff9d:e61b temp This behavior differs from other netlink dump interfaces that dump entries regardless if they are used or not. For example, VLANs are dumped even when VLAN filtering is disabled: # ip link set dev br0 type bridge vlan_filtering 0 # bridge vlan show dev swp1 port vlan-id swp1 1 PVID Egress Untagged Remove the check and always dump MDB entries: # bridge mdb add dev br0 port swp1 grp 239.1.1.1 permanent # bridge mdb show dev br0 dev br0 port swp1 grp 239.1.1.1 permanent dev br0 port br0 grp ff02::6a temp dev br0 port br0 grp ff02::1:ffeb:1a4d temp # ip link set dev br0 type bridge mcast_snooping 0 # bridge mdb show dev br0 dev br0 port swp1 grp 239.1.1.1 permanent dev br0 port br0 grp ff02::6a temp dev br0 port br0 grp ff02::1:ffeb:1a4d temp # ip link set dev br0 type bridge mcast_snooping 1 # bridge mdb show dev br0 dev br0 port swp1 grp 239.1.1.1 permanent dev br0 port br0 grp ff02::6a temp dev br0 port br0 grp ff02::1:ffeb:1a4d temp Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27Documentation/tcp: Add TCP-AO documentationDmitry Safonov2-0/+445
It has Frequently Asked Questions (FAQ) on RFC 5925 - I found it very useful answering those before writing the actual code. It provides answers to common questions that arise on a quick read of the RFC, as well as how they were answered. There's also comparison to TCP-MD5 option, evaluation of per-socket vs in-kernel-DB approaches and description of uAPI provided. Hopefully, it will be as useful for reviewing the code as it was for writing. Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Add TCP_AO_REPAIRDmitry Safonov4-11/+125
Add TCP_AO_REPAIR setsockopt(), getsockopt(). They let a user to repair TCP-AO ISNs/SNEs. Also let the user hack around when (tp->repair) is on and add ao_info on a socket in any supported state. As SNEs now can be read/written at any moment, use WRITE_ONCE()/READ_ONCE() to set/read them. Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Wire up l3index to TCP-AODmitry Safonov8-79/+177
Similarly how TCP_MD5SIG_FLAG_IFINDEX works for TCP-MD5, TCP_AO_KEYF_IFINDEX is an AO-key flag that binds that MKT to a specified by L3 ifinndex. Similarly, without this flag the key will work in the default VRF l3index = 0 for connections. To prevent AO-keys from overlapping, it's restricted to add key B for a socket that has key A, which have the same sndid/rcvid and one of the following is true: - !(A.keyflags & TCP_AO_KEYF_IFINDEX) or !(B.keyflags & TCP_AO_KEYF_IFINDEX) so that any key is non-bound to a VRF - A.l3index == B.l3index both want to work for the same VRF Additionally, it's restricted to match TCP-MD5 keys for the same peer the following way: |--------------|--------------------|----------------|---------------| | | MD5 key without | MD5 key | MD5 key | | | l3index | l3index=0 | l3index=N | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | without | reject | reject | reject | | l3index | | | | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | l3index=0 | reject | reject | allow | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | l3index=N | reject | allow | reject | |--------------|--------------------|----------------|---------------| This is done with the help of tcp_md5_do_lookup_any_l3index() to reject adding AO key without TCP_AO_KEYF_IFINDEX if there's TCP-MD5 in any VRF. This is important for case where sysctl_tcp_l3mdev_accept = 1 Similarly, for TCP-AO lookups tcp_ao_do_lookup() may be used with l3index < 0, so that __tcp_ao_key_cmp() will match TCP-AO key in any VRF. Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Add static_key for TCP-AODmitry Safonov6-44/+96
Similarly to TCP-MD5, add a static key to TCP-AO that is patched out when there are no keys on a machine and dynamically enabled with the first setsockopt(TCP_AO) adds a key on any socket. The static key is as well dynamically disabled later when the socket is destructed. The lifetime of enabled static key here is the same as ao_info: it is enabled on allocation, passed over from full socket to twsk and destructed when ao_info is scheduled for destruction. Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Allow asynchronous delete for TCP-AO keys (MKTs)Dmitry Safonov2-4/+20
Delete becomes very, very fast - almost free, but after setsockopt() syscall returns, the key is still alive until next RCU grace period. Which is fine for listen sockets as userspace needs to be aware of setsockopt(TCP_AO) and accept() race and resolve it with verification by getsockopt() after TCP connection was accepted. The benchmark results (on non-loaded box, worse with more RCU work pending): > ok 33 Worst case delete 16384 keys: min=5ms max=10ms mean=6.93904ms stddev=0.263421 > ok 34 Add a new key 16384 keys: min=1ms max=4ms mean=2.17751ms stddev=0.147564 > ok 35 Remove random-search 16384 keys: min=5ms max=10ms mean=6.50243ms stddev=0.254999 > ok 36 Remove async 16384 keys: min=0ms max=0ms mean=0.0296107ms stddev=0.0172078 Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Add TCP-AO getsockopt()sDmitry Safonov4-14/+369
Introduce getsockopt(TCP_AO_GET_KEYS) that lets a user get TCP-AO keys and their properties from a socket. The user can provide a filter to match the specific key to be dumped or ::get_all = 1 may be used to dump all keys in one syscall. Add another getsockopt(TCP_AO_INFO) for providing per-socket/per-ao_info stats: packet counters, Current_key/RNext_key and flags like ::ao_required and ::accept_icmps. Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Add option for TCP-AO to (not) hash headerDmitry Safonov2-3/+10
Provide setsockopt() key flag that makes TCP-AO exclude hashing TCP header for peers that match the key. This is needed for interraction with middleboxes that may change TCP options, see RFC5925 (9.2). Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Ignore specific ICMPs for TCP-AO connectionsDmitry Safonov7-2/+87
Similarly to IPsec, RFC5925 prescribes: ">> A TCP-AO implementation MUST default to ignore incoming ICMPv4 messages of Type 3 (destination unreachable), Codes 2-4 (protocol unreachable, port unreachable, and fragmentation needed -- ’hard errors’), and ICMPv6 Type 1 (destination unreachable), Code 1 (administratively prohibited) and Code 4 (port unreachable) intended for connections in synchronized states (ESTABLISHED, FIN-WAIT-1, FIN- WAIT-2, CLOSE-WAIT, CLOSING, LAST-ACK, TIME-WAIT) that match MKTs." A selftest (later in patch series) verifies that this attack is not possible in this TCP-AO implementation. Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Add tcp_hash_fail() ratelimited logsDmitry Safonov4-12/+61
Add a helper for logging connection-detailed messages for failed TCP hash verification (both MD5 and AO). Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Add TCP-AO SNE supportDmitry Safonov6-13/+104
Add Sequence Number Extension (SNE) for TCP-AO. This is needed to protect long-living TCP-AO connections from replaying attacks after sequence number roll-over, see RFC5925 (6.2). Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Add TCP-AO segments countersDmitry Safonov9-15/+77
Introduce segment counters that are useful for troubleshooting/debugging as well as for writing tests. Now there are global snmp counters as well as per-socket and per-key. Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Verify inbound TCP-AO signed segmentsDmitry Safonov8-47/+248
Now there is a common function to verify signature on TCP segments: tcp_inbound_hash(). It has checks for all possible cross-interactions with MD5 signs as well as with unsigned segments. The rules from RFC5925 are: (1) Any TCP segment can have at max only one signature. (2) TCP connections can't switch between using TCP-MD5 and TCP-AO. (3) TCP-AO connections can't stop using AO, as well as unsigned connections can't suddenly start using AO. Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Sign SYN-ACK segments with TCP-AODmitry Safonov7-16/+111
Similarly to RST segments, wire SYN-ACKs to TCP-AO. tcp_rsk_used_ao() is handy here to check if the request socket used AO and needs a signature on the outgoing segments. Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Wire TCP-AO to request socketsDmitry Safonov12-51/+506
Now when the new request socket is created from the listening socket, it's recorded what MKT was used by the peer. tcp_rsk_used_ao() is a new helper for checking if TCP-AO option was used to create the request socket. tcp_ao_copy_all_matching() will copy all keys that match the peer on the request socket, as well as preparing them for the usage (creating traffic keys). Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Add TCP-AO sign to twskDmitry Safonov7-50/+183
Add support for sockets in time-wait state. ao_info as well as all keys are inherited on transition to time-wait socket. The lifetime of ao_info is now protected by ref counter, so that tcp_ao_destroy_sock() will destruct it only when the last user is gone. Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Add AO sign to RST packetsDmitry Safonov5-43/+245
Wire up sending resets to TCP-AO hashing. Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Add tcp_parse_auth_options()Dmitry Safonov7-22/+93
Introduce a helper that: (1) shares the common code with TCP-MD5 header options parsing (2) looks for hash signature only once for both TCP-MD5 and TCP-AO (3) fails with -EEXIST if any TCP sign option is present twice, see RFC5925 (2.2): ">> A single TCP segment MUST NOT have more than one TCP-AO in its options sequence. When multiple TCP-AOs appear, TCP MUST discard the segment." Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Add TCP-AO sign to outgoing packetsDmitry Safonov7-38/+391
Using precalculated traffic keys, sign TCP segments as prescribed by RFC5925. Per RFC, TCP header options are included in sign calculation: "The TCP header, by default including options, and where the TCP checksum and TCP-AO MAC fields are set to zero, all in network- byte order." (5.1.3) tcp_ao_hash_header() has exclude_options parameter to optionally exclude TCP header from hash calculation, as described in RFC5925 (9.1), this is needed for interaction with middleboxes that may change "some TCP options". This is wired up to AO key flags and setsockopt() later. Similarly to TCP-MD5 hash TCP segment fragments. From this moment a user can start sending TCP-AO signed segments with one of crypto ahash algorithms from supported by Linux kernel. It can have a user-specified MAC length, to either save TCP option header space or provide higher protection using a longer signature. The inbound segments are not yet verified, TCP-AO option is ignored and they are accepted. Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Calculate TCP-AO traffic keysDmitry Safonov8-2/+314
Add traffic key calculation the way it's described in RFC5926. Wire it up to tcp_finish_connect() and cache the new keys straight away on already established TCP connections. Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Prevent TCP-MD5 with TCP-AO being setDmitry Safonov7-9/+198
Be as conservative as possible: if there is TCP-MD5 key for a given peer regardless of L3 interface - don't allow setting TCP-AO key for the same peer. According to RFC5925, TCP-AO is supposed to replace TCP-MD5 and there can't be any switch between both on any connected tuple. Later it can be relaxed, if there's a use, but in the beginning restrict any intersection. Note: it's still should be possible to set both TCP-MD5 and TCP-AO keys on a listening socket for *different* peers. Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Introduce TCP_AO setsockopt()sDmitry Safonov11-18/+952
Add 3 setsockopt()s: 1. TCP_AO_ADD_KEY to add a new Master Key Tuple (MKT) on a socket 2. TCP_AO_DEL_KEY to delete present MKT from a socket 3. TCP_AO_INFO to change flags, Current_key/RNext_key on a TCP-AO sk Userspace has to introduce keys on every socket it wants to use TCP-AO option on, similarly to TCP_MD5SIG/TCP_MD5SIG_EXT. RFC5925 prohibits definition of MKTs that would match the same peer, so do sanity checks on the data provided by userspace. Be as conservative as possible, including refusal of defining MKT on an established connection with no AO, removing the key in-use and etc. (1) and (2) are to be used by userspace key manager to add/remove keys. (3) main purpose is to set RNext_key, which (as prescribed by RFC5925) is the KeyID that will be requested in TCP-AO header from the peer to sign their segments with. At this moment the life of ao_info ends in tcp_v4_destroy_sock(). Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Add TCP-AO config and structuresDmitry Safonov5-8/+114
Introduce new kernel config option and common structures as well as helpers to be used by TCP-AO code. Co-developed-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Co-developed-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27net/tcp: Prepare tcp_md5sig_pool for TCP-AODmitry Safonov8-211/+525
TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-26MAINTAINERS: Remove linuxwwan@intel.com mailing listBagas Sanjaya1-3/+0
Messages submitted to the ML bounce (address not found error). In fact, the ML was mistagged as person maintainer instead of mailing list. Remove the ML to keep Cc: lists a bit shorter and not to spam everyone's inbox with postmaster notifications. Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231025130332.67995-2-bagasdotme@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26ice: Hook up 4 E830 devices by adding their IDsPawel Chmielewski1-0/+4
As the previous patches provide support for E830 hardware, add E830 specific IDs to the PCI device ID table, so these devices can now be probed by the kernel. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-7-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26ice: Remove redundant zeroing of the fields.Pawel Chmielewski1-27/+27
Remove zeroing of the fields, as all the fields are in fact initialized with zeros automatically Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-6-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26ice: Add support for E830 DDP package segmentDan Nowlin3-74/+382
Add support for E830 DDP package segment. For the E830 package, signature buffers will not be included inline in the configuration buffers. Instead, the signature buffers will be located in a signature segment. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-5-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26ice: Add ice_get_link_status_datalenPaul Greenwalt2-6/+53
The Get Link Status data length can vary with different versions of ice_aqc_get_link_status_data. Add ice_get_link_status_datalen() to return datalen for the specific ice_aqc_get_link_status_data version. Add new link partner fields to ice_aqc_get_link_status_data; PHY type, FEC, and flow control. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-4-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26ice: Add 200G speed/phy type useAlice Michael4-3/+43
Add the support for 200G phy speeds and the mapping for their advertisement in link. Add the new PHY type bits for AQ command, as needed for 200G E830 controllers. Signed-off-by: Alice Michael <alice.michael@intel.com> Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26ice: Add E830 device IDs, MAC type and registersPaul Greenwalt7-61/+141
E830 is the 200G NIC family which uses the ice driver. Add specific E830 registers. Embed macros to use proper register based on (hw)->mac_type & name those macros to [ORIGINAL]_BY_MAC(hw). Registers only available on one of the macs will need to be explicitly referred to as E800_NAME instead of just NAME. PTP is not yet supported. Co-developed-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com> Co-developed-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Co-developed-by: Scott Taylor <scott.w.taylor@intel.com> Signed-off-by: Scott Taylor <scott.w.taylor@intel.com> Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26MAINTAINERS: Maintainer change for ptp_vmw driverAlexey Makhalov1-1/+1
Deep has decided to transfer the maintainership of the VMware virtual PTP clock driver (ptp_vmw) to Jeff. Update the MAINTAINERS file to reflect this change. Signed-off-by: Alexey Makhalov <amakhalov@vmware.com> Acked-by: Deep Shah <sdeep@vmware.com> Acked-by: Jeff Sipek <jsipek@vmware.com> Link: https://lore.kernel.org/r/20231025231931.76842-1-amakhalov@vmware.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.