| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When running SEV-SNP guests on a CPU that supports DebugSwap, always save
the host's DR0..DR3 mask MSR values irrespective of whether or not
DebugSwap is enabled, to ensure the host values aren't clobbered by the
CPU. And for now, also save DR0..DR3, even though doing so isn't
necessary (see below).
SVM_VMGEXIT_AP_CREATE is deeply flawed in that it allows the *guest* to
create a VMSA with guest-controlled SEV_FEATURES. A well behaved guest
can inform the hypervisor, i.e. KVM, of its "requested" features, but on
CPUs without ALLOWED_SEV_FEATURES support, nothing prevents the guest from
lying about which SEV features are being enabled (or not!).
If a misbehaving guest enables DebugSwap in a secondary vCPU's VMSA, the
CPU will load the DR0..DR3 mask MSRs on #VMEXIT, i.e. will clobber the
MSRs with '0' if KVM doesn't save its desired value.
Note, DR0..DR3 themselves are "ok", as DR7 is reset on #VMEXIT, and KVM
restores all DRs in common x86 code as needed via hw_breakpoint_restore().
I.e. there is no risk of host DR0..DR3 being clobbered (when it matters).
However, there is a flaw in the opposite direction; because the guest can
lie about enabling DebugSwap, i.e. can *disable* DebugSwap without KVM's
knowledge, KVM must not rely on the CPU to restore DRs. Defer fixing
that wart, as it's more of a documentation issue than a bug in the code.
Note, KVM added support for DebugSwap on commit d1f85fbe836e ("KVM: SEV:
Enable data breakpoints in SEV-ES"), but that is not an appropriate Fixes,
as the underlying flaw exists in hardware, not in KVM. I.e. all kernels
that support SEV-SNP need to be patched, not just kernels with KVM's full
support for DebugSwap (ignoring that DebugSwap support landed first).
Opportunistically fix an incorrect statement in the comment; on CPUs
without DebugSwap, the CPU does NOT save or load debug registers, i.e.
Fixes: e366f92ea99e ("KVM: SEV: Support SEV-SNP AP Creation NAE event")
Cc: stable@vger.kernel.org
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250227012541.3234589-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Snapshot the host's DEBUGCTL after disabling IRQs, as perf can toggle
debugctl bits from IRQ context, e.g. when enabling/disabling events via
smp_call_function_single(). Taking the snapshot (long) before IRQs are
disabled could result in KVM effectively clobbering DEBUGCTL due to using
a stale snapshot.
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Manually load the guest's DEBUGCTL prior to VMRUN (and restore the host's
value on #VMEXIT) if it diverges from the host's value and LBR
virtualization is disabled, as hardware only context switches DEBUGCTL if
LBR virtualization is fully enabled. Running the guest with the host's
value has likely been mildly problematic for quite some time, e.g. it will
result in undesirable behavior if BTF diverges (with the caveat that KVM
now suppresses guest BTF due to lack of support).
But the bug became fatal with the introduction of Bus Lock Trap ("Detect"
in kernel paralance) support for AMD (commit 408eb7417a92
("x86/bus_lock: Add support for AMD")), as a bus lock in the guest will
trigger an unexpected #DB.
Note, suppressing the bus lock #DB, i.e. simply resuming the guest without
injecting a #DB, is not an option. It wouldn't address the general issue
with DEBUGCTL, e.g. for things like BTF, and there are other guest-visible
side effects if BusLockTrap is left enabled.
If BusLockTrap is disabled, then DR6.BLD is reserved-to-1; any attempts to
clear it by software are ignored. But if BusLockTrap is enabled, software
can clear DR6.BLD:
Software enables bus lock trap by setting DebugCtl MSR[BLCKDB] (bit 2)
to 1. When bus lock trap is enabled, ... The processor indicates that
this #DB was caused by a bus lock by clearing DR6[BLD] (bit 11). DR6[11]
previously had been defined to be always 1.
and clearing DR6.BLD is "sticky" in that it's not set (i.e. lowered) by
other #DBs:
All other #DB exceptions leave DR6[BLD] unmodified
E.g. leaving BusLockTrap enable can confuse a legacy guest that writes '0'
to reset DR6.
Reported-by: rangemachine@gmail.com
Reported-by: whanos@sergal.fun
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219787
Closes: https://lore.kernel.org/all/bug-219787-28872@https.bugzilla.kernel.org%2F
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move KVM's snapshot of DEBUGCTL to kvm_vcpu_arch and take the snapshot in
common x86, so that SVM can also use the snapshot.
Opportunistically change the field to a u64. While bits 63:32 are reserved
on AMD, not mentioned at all in Intel's SDM, and managed as an "unsigned
long" by the kernel, DEBUGCTL is an MSR and therefore a 64-bit value.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Mark BTF as reserved in DEBUGCTL on AMD, as KVM doesn't actually support
BTF, and fully enabling BTF virtualization is non-trivial due to
interactions with the emulator, guest_debug, #DB interception, nested SVM,
etc.
Don't inject #GP if the guest attempts to set BTF, as there's no way to
communicate lack of support to the guest, and instead suppress the flag
and treat the WRMSR as (partially) unsupported.
In short, make KVM behave the same on AMD and Intel (VMX already squashes
BTF).
Note, due to other bugs in KVM's handling of DEBUGCTL, the only way BTF
has "worked" in any capacity is if the guest simultaneously enables LBRs.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop bits 5:2 from the guest's effective DEBUGCTL value, as AMD changed
the architectural behavior of the bits and broke backwards compatibility.
On CPUs without BusLockTrap (or at least, in APMs from before ~2023),
bits 5:2 controlled the behavior of external pins:
Performance-Monitoring/Breakpoint Pin-Control (PBi)—Bits 5:2, read/write.
Software uses thesebits to control the type of information reported by
the four external performance-monitoring/breakpoint pins on the
processor. When a PBi bit is cleared to 0, the corresponding external pin
(BPi) reports performance-monitor information. When a PBi bit is set to
1, the corresponding external pin (BPi) reports breakpoint information.
With the introduction of BusLockTrap, presumably to be compatible with
Intel CPUs, AMD redefined bit 2 to be BLCKDB:
Bus Lock #DB Trap (BLCKDB)—Bit 2, read/write. Software sets this bit to
enable generation of a #DB trap following successful execution of a bus
lock when CPL is > 0.
and redefined bits 5:3 (and bit 6) as "6:3 Reserved MBZ".
Ideally, KVM would treat bits 5:2 as reserved. Defer that change to a
feature cleanup to avoid breaking existing guest in LTS kernels. For now,
drop the bits to retain backwards compatibility (of a sort).
Note, dropping bits 5:2 is still a guest-visible change, e.g. if the guest
is enabling LBRs *and* the legacy PBi bits, then the state of the PBi bits
is visible to the guest, whereas now the guest will always see '0'.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add an L1 (guest) assert to the nested exceptions test to verify that KVM
doesn't put VMRUN in an STI shadow (AMD CPUs bleed the shadow into the
guest's int_state if a #VMEXIT occurs before VMRUN fully completes).
Add a similar assert to the VMX side as well, because why not.
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250224165442.2338294-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Enable/disable local IRQs, i.e. set/clear RFLAGS.IF, in the common
svm_vcpu_enter_exit() just after/before guest_state_{enter,exit}_irqoff()
so that VMRUN is not executed in an STI shadow. AMD CPUs have a quirk
(some would say "bug"), where the STI shadow bleeds into the guest's
intr_state field if a #VMEXIT occurs during injection of an event, i.e. if
the VMRUN doesn't complete before the subsequent #VMEXIT.
The spurious "interrupts masked" state is relatively benign, as it only
occurs during event injection and is transient. Because KVM is already
injecting an event, the guest can't be in HLT, and if KVM is querying IRQ
blocking for injection, then KVM would need to force an immediate exit
anyways since injecting multiple events is impossible.
However, because KVM copies int_state verbatim from vmcb02 to vmcb12, the
spurious STI shadow is visible to L1 when running a nested VM, which can
trip sanity checks, e.g. in VMware's VMM.
Hoist the STI+CLI all the way to C code, as the aforementioned calls to
guest_state_{enter,exit}_irqoff() already inform lockdep that IRQs are
enabled/disabled, and taking a fault on VMRUN with RFLAGS.IF=1 is already
possible. I.e. if there's kernel code that is confused by running with
RFLAGS.IF=1, then it's already a problem. In practice, since GIF=0 also
blocks NMIs, the only change in exposure to non-KVM code (relative to
surrounding VMRUN with STI+CLI) is exception handling code, and except for
the kvm_rebooting=1 case, all exception in the core VM-Enter/VM-Exit path
are fatal.
Use the "raw" variants to enable/disable IRQs to avoid tracing in the
"no instrumentation" code; the guest state helpers also take care of
tracing IRQ state.
Oppurtunstically document why KVM needs to do STI in the first place.
Reported-by: Doug Covelli <doug.covelli@broadcom.com>
Closes: https://lore.kernel.org/all/CADH9ctBs1YPmE4aCfGPNBwA10cA8RuAk2gO7542DjMZgs4uzJQ@mail.gmail.com
Fixes: f14eec0a3203 ("KVM: SVM: move more vmentry code to assembly")
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250224165442.2338294-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the conditional loading of hardware DR6 with the guest's DR6 value
out of the core .vcpu_run() loop to fix a bug where KVM can load hardware
with a stale vcpu->arch.dr6.
When the guest accesses a DR and host userspace isn't debugging the guest,
KVM disables DR interception and loads the guest's values into hardware on
VM-Enter and saves them on VM-Exit. This allows the guest to access DRs
at will, e.g. so that a sequence of DR accesses to configure a breakpoint
only generates one VM-Exit.
For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also
identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest)
and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading
DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop.
But for DR6, the guest's value doesn't need to be loaded into hardware for
KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas
VMX requires software to manually load the guest value, and so loading the
guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done
_inside_ the core run loop.
Unfortunately, saving the guest values on VM-Exit is initiated by common
x86, again outside of the core run loop. If the guest modifies DR6 (in
hardware, when DR interception is disabled), and then the next VM-Exit is
a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and
clobber the guest's actual value.
The bug shows up primarily with nested VMX because KVM handles the VMX
preemption timer in the fastpath, and the window between hardware DR6
being modified (in guest context) and DR6 being read by guest software is
orders of magnitude larger in a nested setup. E.g. in non-nested, the
VMX preemption timer would need to fire precisely between #DB injection
and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the
window where hardware DR6 is "dirty" extends all the way from L1 writing
DR6 to VMRESUME (in L1).
L1's view:
==========
<L1 disables DR interception>
CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0
A: L1 Writes DR6
CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1
B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec
D: L1 reads DR6, arch.dr6 = 0
CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0
CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0
L2 reads DR6, L1 disables DR interception
CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216
CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0
CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0
L2 detects failure
CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT
L1 reads DR6 (confirms failure)
CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0
L0's view:
==========
L2 reads DR6, arch.dr6 = 0
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
L2 => L1 nested VM-Exit
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_exit: vcpu 23 reason VMREAD
CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_entry: vcpu 23
L1 writes DR7, L0 disables DR interception
CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000007
CPU 23/KVM-5046 [001] d.... 3410.005613: kvm_entry: vcpu 23
L0 writes DR6 = 0 (arch.dr6)
CPU 23/KVM-5046 [001] d.... 3410.005613: <hack>: Set DRs, DR6 = 0xffff0ff0
A: <L1 writes DR6 = 1, no interception, arch.dr6 is still '0'>
B: CPU 23/KVM-5046 [001] d.... 3410.005614: kvm_exit: vcpu 23 reason PREEMPTION_TIMER
CPU 23/KVM-5046 [001] d.... 3410.005614: kvm_entry: vcpu 23
C: L0 writes DR6 = 0 (arch.dr6)
CPU 23/KVM-5046 [001] d.... 3410.005614: <hack>: Set DRs, DR6 = 0xffff0ff0
L1 => L2 nested VM-Enter
CPU 23/KVM-5046 [001] d.... 3410.005616: kvm_exit: vcpu 23 reason VMRESUME
L0 reads DR6, arch.dr6 = 0
Reported-by: John Stultz <jstultz@google.com>
Closes: https://lkml.kernel.org/r/CANDhNCq5_F3HfFYABqFGCA1bPd_%2BxgNj-iDQhH4tDk%2Bwi8iZZg%40mail.gmail.com
Fixes: 375e28ffc0cf ("KVM: X86: Set host DR6 only on VMX and for KVM_DEBUGREG_WONT_EXIT")
Fixes: d67668e9dd76 ("KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6")
Cc: stable@vger.kernel.org
Cc: Jim Mattson <jmattson@google.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20250125011833.3644371-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When preparing vmcb02 for nested VMRUN (or state restore), "enter" guest
mode prior to initializing the MMU for nested NPT so that guest_mode is
set in the MMU's role. KVM's model is that all L2 MMUs are tagged with
guest_mode, as the behavior of hypervisor MMUs tends to be significantly
different than kernel MMUs.
Practically speaking, the bug is relatively benign, as KVM only directly
queries role.guest_mode in kvm_mmu_free_guest_mode_roots() and
kvm_mmu_page_ad_need_write_protect(), which SVM doesn't use, and in paths
that are optimizations (mmu_page_zap_pte() and
shadow_mmu_try_split_huge_pages()).
And while the role is incorprated into shadow page usage, because nested
NPT requires KVM to be using NPT for L1, reusing shadow pages across L1
and L2 is impossible as L1 MMUs will always have direct=1, while L2 MMUs
will have direct=0.
Hoist the TLB processing and setting of HF_GUEST_MASK to the beginning
of the flow instead of forcing guest_mode in the MMU, as nothing in
nested_vmcb02_prepare_control() between the old and new locations touches
TLB flush requests or HF_GUEST_MASK, i.e. there's no reason to present
inconsistent vCPU state to the MMU.
Fixes: 69cb877487de ("KVM: nSVM: move MMU setup to nested_prepare_vmcb_control")
Cc: stable@vger.kernel.org
Reported-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://lore.kernel.org/r/20250130010825.220346-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add testcases to x86's Hyper-V CPUID test to verify that KVM advertises
support for features that require an in-kernel local APIC appropriately,
i.e. that KVM hides support from the vCPU-scoped ioctl if the VM doesn't
have an in-kernel local APIC.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Allocate, get, and free the CPUID array in the Hyper-V CPUID test in the
test's core helper, instead of copy+pasting code at each call site. In
addition to deduplicating a small amount of code, restricting visibility
of the array to a single invocation of the core test prevents "leaking" an
array across test cases. Passing in @vcpu to the helper will also allow
pivoting on VM-scoped information without needing to pass more booleans,
e.g. to conditionally assert on features that require an in-kernel APIC.
To avoid use-after-free bugs due to overzealous and careless developers,
opportunstically add a comment to explain that the system-scoped helper
caches the Hyper-V CPUID entries, i.e. that the caller is not responsible
for freeing the memory.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Make the Hyper-V CPUID test's local helper test_hv_cpuid_e2big() static,
it's not used outside of the test (and isn't intended to be).
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Advertise support for Hyper-V's SEND_IPI and SEND_IPI_EX hypercalls if and
only if the local API is emulated/virtualized by KVM, and explicitly reject
said hypercalls if the local APIC is emulated in userspace, i.e. don't rely
on userspace to opt-in to KVM_CAP_HYPERV_ENFORCE_CPUID.
Rejecting SEND_IPI and SEND_IPI_EX fixes a NULL-pointer dereference if
Hyper-V enlightenments are exposed to the guest without an in-kernel local
APIC:
dump_stack+0xbe/0xfd
__kasan_report.cold+0x34/0x84
kasan_report+0x3a/0x50
__apic_accept_irq+0x3a/0x5c0
kvm_hv_send_ipi.isra.0+0x34e/0x820
kvm_hv_hypercall+0x8d9/0x9d0
kvm_emulate_hypercall+0x506/0x7e0
__vmx_handle_exit+0x283/0xb60
vmx_handle_exit+0x1d/0xd0
vcpu_enter_guest+0x16b0/0x24c0
vcpu_run+0xc0/0x550
kvm_arch_vcpu_ioctl_run+0x170/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscal1_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Note, checking the sending vCPU is sufficient, as the per-VM irqchip_mode
can't be modified after vCPUs are created, i.e. if one vCPU has an
in-kernel local APIC, then all vCPUs have an in-kernel local APIC.
Reported-by: Dongjie Zou <zoudongjie@huawei.com>
Fixes: 214ff83d4473 ("KVM: x86: hyperv: implement PV IPI send hypercalls")
Fixes: 2bc39970e932 ("x86/kvm/hyper-v: Introduce KVM_GET_SUPPORTED_HV_CPUID")
Cc: stable@vger.kernel.org
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
|
|
Commit 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of
parents and children") exposed an issue related to simple_pm_bus_pm_ops
that uses pm_runtime_force_suspend() and pm_runtime_force_resume() as
bus type PM callbacks for the noirq phases of system-wide suspend and
resume.
The problem is that pm_runtime_force_suspend() does not distinguish
runtime-suspended devices from devices for which runtime PM has never
been enabled, so if it sees a device with runtime PM status set to
RPM_ACTIVE, it will assume that runtime PM is enabled for that device
and so it will attempt to suspend it with the help of its runtime PM
callbacks which may not be ready for that. As it turns out, this
causes simple_pm_bus_runtime_suspend() to crash due to a NULL pointer
dereference.
Another problem related to the above commit and simple_pm_bus_pm_ops is
that setting runtime PM status of a device handled by the latter to
RPM_ACTIVE will actually prevent it from being resumed because
pm_runtime_force_resume() only resumes devices with runtime PM status
set to RPM_SUSPENDED.
To mitigate these issues, do not allow power.set_active to propagate
beyond the parent of the device with DPM_FLAG_SMART_SUSPEND set that
will need to be resumed, which should be a sufficient stop-gap for the
time being, but they will need to be properly addressed in the future
because in general during system-wide resume it is necessary to resume
all devices in a dependency chain in which at least one device is going
to be resumed.
Fixes: 3775fc538f53 ("PM: sleep: core: Synchronize runtime PM status of parents and children")
Closes: https://lore.kernel.org/linux-pm/1c2433d4-7e0f-4395-b841-b8eac7c25651@nvidia.com/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6137505.lOV4Wx5bFT@rjwysocki.net
|
|
The code was restructured where the function graph notrace code, that
would not trace a function and all its children is done by setting a
NOTRACE flag when the function that is not to be traced is hit.
There's a TRACE_GRAPH_NOTRACE_BIT which defines the bit in the flags and a
TRACE_GRAPH_NOTRACE which is the mask with that bit set. But the
restructuring used TRACE_GRAPH_NOTRACE_BIT when it should have used
TRACE_GRAPH_NOTRACE.
For example:
# cd /sys/kernel/tracing
# echo set_track_prepare stack_trace_save > set_graph_notrace
# echo function_graph > current_tracer
# cat trace
[..]
0) | __slab_free() {
0) | free_to_partial_list() {
0) | arch_stack_walk() {
0) | __unwind_start() {
0) 0.501 us | get_stack_info();
Where a non filter trace looks like:
# echo > set_graph_notrace
# cat trace
0) | free_to_partial_list() {
0) | set_track_prepare() {
0) | stack_trace_save() {
0) | arch_stack_walk() {
0) | __unwind_start() {
Where the filter should look like:
# cat trace
0) | free_to_partial_list() {
0) | _raw_spin_lock_irqsave() {
0) 0.350 us | preempt_count_add();
0) 0.351 us | do_raw_spin_lock();
0) 2.440 us | }
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250208001511.535be150@batman.local.home
Fixes: b84214890a9bc ("function_graph: Move graph notrace bit to shadow stack global var")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
-Wenum-enum-conversion was strengthened in clang-19 to warn for C, which
caused the kernel to move it to W=1 in commit 75b5ab134bb5 ("kbuild:
Move -Wenum-{compare-conditional,enum-conversion} into W=1") because
there were numerous instances that would break builds with -Werror.
Unfortunately, this is not a full solution, as more and more developers,
subsystems, and distributors are building with W=1 as well, so they
continue to see the numerous instances of this warning.
Since the move to W=1, there have not been many new instances that have
appeared through various build reports and the ones that have appeared
seem to be following similar existing patterns, suggesting that most
instances of this warning will not be real issues. The only alternatives
for silencing this warning are adding casts (which is generally seen as
an ugly practice) or refactoring the enums to macro defines or a unified
enum (which may be undesirable because of type safety in other parts of
the code).
Move the warning to W=2, where warnings that occur frequently but may be
relevant should reside.
Cc: stable@vger.kernel.org
Fixes: 75b5ab134bb5 ("kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1")
Link: https://lore.kernel.org/ZwRA9SOcOjjLJcpi@google.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
While attempting to build a Debian packages with CC="ccache gcc", I
saw the following error as builddeb builds linux-headers-$KERNELVERSION:
make HOSTCC=ccache gcc VPATH= srcroot=. -f ./scripts/Makefile.build obj=debian/linux-headers-6.14.0-rc1/usr/src/linux-headers-6.14.0-rc1/scripts
make[6]: *** No rule to make target 'gcc'. Stop.
Upon investigation, it seems that one instance of $(CC) variable reference
in ./scripts/package/install-extmod-build was missing quotation marks,
causing the above error.
Add the missing quotation marks around $(CC) to fix build.
Fixes: 5f73e7d0386d ("kbuild: refactor cross-compiling linux-headers package")
Co-developed-by: Mingcong Bai <jeffbai@aosc.io>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Tested-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
I no longer have any faith left in the kernel development process or
community management approach.
Apple/ARM platform development will continue downstream. If I feel like
sending some patches upstream in the future myself for whatever subtree
I may, or I may not. Anyone who feels like fighting the upstreaming
fight themselves is welcome to do so.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I need to filter my emails better, switch to pavel@kernel.org address
to help with that.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This costs a strlen() call when instatianating a symlink.
Preferably it would be hidden behind VFS_WARN_ON (or compatible), but
there is no such facility at the moment. With the facility in place the
call can be patched out in production kernels.
In the meantime, since the cost is being paid unconditionally, use the
result to a fixup the bad caller.
This is not expected to persist in the long run (tm).
Sample splat:
bad length passed for symlink [/tmp/syz-imagegen43743633/file0/file0] (got 131109, expected 37)
[rest of WARN blurp goes here]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250204213207.337980-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pidfs supports extensible and non-extensible ioctls. The extensible
ioctls need to check for the ioctl number itself not just the ioctl
command otherwise both backward- and forward compatibility are broken.
The pidfs ioctl handler also needs to look at the type of the ioctl
command to guard against cases where "[...] a daemon receives some
random file descriptor from a (potentially less privileged) client and
expects the FD to be of some specific type, it might call ioctl() on
this FD with some type-specific command and expect the call to fail if
the FD is of the wrong type; but due to the missing type check, the
kernel instead performs some action that userspace didn't expect."
(cf. [1]]
Link: https://lore.kernel.org/r/20250204-work-pidfs-ioctl-v1-1-04987d239575@kernel.org
Link: https://lore.kernel.org/r/CAG48ez2K9A5GwtgqO31u9ZL292we8ZwAA=TJwwEv7wRuJ3j4Lw@mail.gmail.com [1]
Fixes: 8ce352818820 ("pidfs: check for valid ioctl commands")
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org # v6.13; please backport with 8ce352818820 ("pidfs: check for valid ioctl commands")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
After introducing pre-content events, we had a regression related to
disabling huge faults on files that should never have pre-content events
enabled.
This happened because the default f_mode of allocated files (0) does
not disable pre-content events.
Pre-content events are disabled in file_set_fsnotify_mode_by_watchers()
but internal files may not get to call this helper.
Initialize f_mode to disable permission and pre-content events for all
files and if needed they will be enabled for the callers of
file_set_fsnotify_mode_by_watchers().
Fixes: 20bf82a898b6 ("mm: don't allow huge faults for files with pre content watches")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Closes: https://lore.kernel.org/linux-fsdevel/20250131121703.1e4d00a7.alex.williamson@redhat.com/
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20250203223205.861346-4-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
STATMOUNT_MNT_OPTS can actually be missing if there are no options. This
is a change of behavior since 75ead69a7173 ("fs: don't let statmount return
empty strings").
The other checks shouldn't actually trigger, but add them for correctness
and for easier debugging if the test fails.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250129160641.35485-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Most pseudo files are not applicable for fsnotify events at all,
let alone to the new pre-content events.
Disable notifications to all files allocated with alloc_file_pseudo()
and enable legacy inotify events for the specific cases of pipe and
socket, which have known users of inotify events.
Pre-content events are also kept disabled for sockets and pipes.
Fixes: 20bf82a898b6 ("mm: don't allow huge faults for files with pre content watches")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Closes: https://lore.kernel.org/linux-fsdevel/20250131121703.1e4d00a7.alex.williamson@redhat.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-fsdevel/CAHk-=wi2pThSVY=zhO=ZKxViBj5QCRX-=AS2+rVknQgJnHXDFg@mail.gmail.com/
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20250203223205.861346-3-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Prepending security options was made conditional on sb->s_op->show_options,
but security options are independent of sb options.
Fixes: 056d33137bf9 ("fs: prepend statmount.mnt_opts string with security_sb_mnt_opts()")
Fixes: f9af549d1fd3 ("fs: export mount options via statmount()")
Cc: stable@vger.kernel.org # v6.11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250129151253.33241-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The FMODE_NONOTIFY_* bits are a 2-bits mode. Open coding manipulation
of those bits is risky. Use an accessor file_set_fsnotify_mode() to
set the mode.
Rename file_set_fsnotify_mode() => file_set_fsnotify_mode_from_watchers()
to make way for the simple accessor name.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20250203223205.861346-2-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All users of lockref_init() now initialize the count to 1, so hardcode
that and remove the count argument.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Link: https://lore.kernel.org/r/20250130135624.1899988-4-agruenba@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In qd_alloc(), initialize the lockref count to 1 to cover the common
case. Compensate for that in gfs2_quota_init() by adjusting the count
back down to 0; this only occurs when mounting the filesystem rw.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Link: https://lore.kernel.org/r/20250130135624.1899988-3-agruenba@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Move the initialization of gl_lockref from gfs2_init_glock_once() to
gfs2_glock_get(). This allows to use lockref_init() there.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Link: https://lore.kernel.org/r/20250130135624.1899988-2-agruenba@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Just like it's normal for unset values to be zero, unset strings should be
empty instead of containing random values.
It seems to be a typical mistake that the mask returned by statmount is not
checked, which can result in various bugs.
With this fix, these bugs are prevented, since it is highly likely that
userspace would just want to turn the missing mask case into an empty
string anyway (most of the recently found cases are of this type).
Link: https://lore.kernel.org/all/CAJfpegsVCPfCn2DpM8iiYSS5DpMsLB8QBUCHecoj6s0Vxf4jzg@mail.gmail.com/
Fixes: 68385d77c05b ("statmount: simplify string option retrieval")
Fixes: 46eae99ef733 ("add statmount(2) syscall")
Cc: stable@vger.kernel.org # v6.8
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250130121500.113446-1-mszeredi@redhat.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Building with GCC 15 results in build error
fs/vboxsf/super.c:24:54: error: initializer-string for array of ‘unsigned char’ is too long [-Werror=unterminated-string-initialization]
24 | static const unsigned char VBSF_MOUNT_SIGNATURE[4] = "\000\377\376\375";
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Due to GCC having enabled -Werror=unterminated-string-initialization[0]
by default. Separately initializing each array element of
VBSF_MOUNT_SIGNATURE to ensure NUL termination, thus satisfying GCC 15
and fixing the build error.
[0]: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wno-unterminated-string-initialization
Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Link: https://lore.kernel.org/r/20250121162648.1408743-1-brahmajit.xyz@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Clang static checker(scan-build) warning:
fs/stat.c:287:21: warning: The left expression of the compound assignment is
an uninitialized value. The computed value will also be garbage.
287 | stat->result_mask |= STATX_MNT_ID_UNIQUE;
| ~~~~~~~~~~~~~~~~~ ^
fs/stat.c:290:21: warning: The left expression of the compound assignment is
an uninitialized value. The computed value will also be garbage.
290 | stat->result_mask |= STATX_MNT_ID;
When vfs_getattr() failed because of security_inode_getattr(), 'stat' is
uninitialized. In this case, there is a harmless garbage problem in
vfs_statx_path(). It's better to return error directly when
vfs_getattr() failed, avoiding garbage value and more clearly.
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20250119025946.1168957-1-suhui@nfschina.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Before attaching a new root to the old root, the children counter of the
new root is checked to verify that only the upcoming CPU's top group have
been connected to it. However since the recently added commit b729cc1ec21a
("timers/migration: Fix another race between hotplug and idle entry/exit")
this check is not valid anymore because the old root is pre-accounted
as a child to the new root. Therefore after connecting the upcoming
CPU's top group to the new root, the children count to be expected must
be 2 and not 1 anymore.
This omission results in the old root to not be connected to the new
root. Then eventually the system may run with more than one top level,
which defeats the purpose of a single idle migrator.
Also the old root is pre-accounted but not connected upon the new root
creation. But it can be connected to the new root later on. Therefore
the old root may be accounted twice to the new root. The propagation of
such overcommit can end up creating a double final top-level root with a
groupmask incorrectly initialized. Although harmless given that the final
top level roots will never have a parent to walk up to, this oddity
opportunistically reported the core issue:
WARNING: CPU: 8 PID: 0 at kernel/time/timer_migration.c:543 tmigr_requires_handle_remote
CPU: 8 UID: 0 PID: 0 Comm: swapper/8
RIP: 0010:tmigr_requires_handle_remote
Call Trace:
<IRQ>
? tmigr_requires_handle_remote
? hrtimer_run_queues
update_process_times
tick_periodic
tick_handle_periodic
__sysvec_apic_timer_interrupt
sysvec_apic_timer_interrupt
</IRQ>
Fix the problem by taking the old root into account in the children count
of the new root so the connection is not omitted.
Also warn when more than one top level group exists to better detect
similar issues in the future.
Fixes: b729cc1ec21a ("timers/migration: Fix another race between hotplug and idle entry/exit")
Reported-by: Matt Fleming <mfleming@cloudflare.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250205160220.39467-1-frederic@kernel.org
|
|
The space separator was factored out from the multiple chip name prints,
but several irq_chip::irq_print_chip() callbacks still print a leading
space. Remove the superfluous double spaces.
Fixes: 9d9f204bdf7243bf ("genirq/proc: Add missing space separator back")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/893f7e9646d8933cd6786d5a1ef3eb076d263768.1738764803.git.geert+renesas@glider.be
|
|
Previously, bch2_bkey_sectors_need_rebalance() called
bch2_target_accepts_data(), checking whether the target is writable.
However, this means that adding or removing devices from a target would
change the value of bch2_bkey_sectors_need_rebalance() for an existing
extent; this needs to be invariant so that the extent trigger can
correctly maintain rebalance_work accounting.
Instead, check target_accepts_data() in io_opts_to_rebalance_opts(),
before creating the bch_extent_rebalance entry.
This fixes (one?) cause of rebalance_work accounting being off.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Spotted by sparse.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The discard path is supposed to issue journal flushes when there's too
many buckets empty buckets that need a journal commit before they can be
written to again, but at some point this code seems to have been lost.
Bring it back with a new optimization to make sure we don't issue too
many journal flushes: the journal now tracks the sequence number of the
most recent flush in progress, which the discard path uses when deciding
which buckets need a journal flush.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In the previous commit b3d82c2f2761, code was added to prevent journal sequence
overflow. Among them, the code added to journal_entry_open() uses the
bch2_fs_fatal_err_on() function to handle errors.
However, __journal_res_get() , which calls journal_entry_open() , calls
journal_entry_open() while holding journal->lock , but bch2_fs_fatal_err_on()
internally tries to acquire journal->lock , which results in a deadlock.
So we need to add a locked helper to handle fatal errors even when the
journal->lock is held.
Fixes: b3d82c2f2761 ("bcachefs: Guard against journal seq overflow")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
For some unknown reason, checks on struct bkey_s_c_snapshot and struct
bkey_s_c_snapshot_tree pointers are missing.
Therefore, I think it would be appropriate to fix the incorrect pointer checking
through this patch.
Fixes: 4bd06f07bcb5 ("bcachefs: Fixes for snapshot_tree.master_subvol")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add an (initial?) patch submission checklist, focusing mainly on
testing.
Yes, all patches must be tested, and that starts (but does not end) with
the patch author.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The destination argument of memtostr*() and strtomem*() must be a
fixed-size char array at compile time, so there is no need to use
__builtin_object_size() (which is useful for when an argument is
either a pointer or unknown). Instead use ARRAY_SIZE(), which has the
benefit of working around a bug in Clang (fixed[1] in 15+) that got
__builtin_object_size() wrong sometimes.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501310832.kiAeOt2z-lkp@intel.com/
Suggested-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://github.com/llvm/llvm-project/commit/d8e0a6d5e9dd2311641f9a8a5d2bf90829951ddc [1]
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
In preparation for adding stricter type checking to the str/mem*()
helpers, provide a way to check that a variable is a byte array
via __must_be_byte_array().
Suggested-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The C kernel helpers for evaluating C Strings were positioned where they
were visible to assembly inclusion, which was not intended. Move them
into the kernel and C-only area of the header so future changes won't
confuse the assembler.
Fixes: d7a516c6eeae ("compiler.h: Fix undefined BUILD_BUG_ON_ZERO()")
Fixes: 559048d156ff ("string: Check for "nonstring" attribute on strscpy() arguments")
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
When using Rust on the x86 architecture, we are currently using the
unstable target.json feature to specify the compilation target. Rustc is
going to change how softfloat is specified in the target.json file on
x86, thus update generate_rust_target.rs to specify softfloat using the
new option.
Note that if you enable this parameter with a compiler that does not
recognize it, then that triggers a warning but it does not break the
build.
[ For future reference, this solves the following error:
RUSTC L rust/core.o
error: Error loading target specification: target feature
`soft-float` is incompatible with the ABI but gets enabled in
target spec. Run `rustc --print target-list` for a list of
built-in targets
- Miguel ]
Cc: <stable@vger.kernel.org> # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/136146
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Link: https://lore.kernel.org/r/20250203-rustc-1-86-x86-softfloat-v1-1-220a72a5003e@google.com
[ Added 6.13.y too to Cc: stable tag and added reasoning to avoid
over-backporting. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The uretprobe syscall is implemented as a performance enhancement on
x86_64 by having the kernel inject a call to it on function exit; User
programs cannot call this system call explicitly.
As such, this syscall is considered a kernel implementation detail and
should not be filtered by seccomp.
Enhance the seccomp bpf test suite to check that uretprobes can be
attached to processes without the killing the process regardless of
seccomp policy.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20250202162921.335813-3-eyal.birger@gmail.com
[kees: Skip archs without __NR_uretprobe]
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
When attaching uretprobes to processes running inside docker, the attached
process is segfaulted when encountering the retprobe.
The reason is that now that uretprobe is a system call the default seccomp
filters in docker block it as they only allow a specific set of known
syscalls. This is true for other userspace applications which use seccomp
to control their syscall surface.
Since uretprobe is a "kernel implementation detail" system call which is
not used by userspace application code directly, it is impractical and
there's very little point in forcing all userspace applications to
explicitly allow it in order to avoid crashing tracked processes.
Pass this systemcall through seccomp without depending on configuration.
Note: uretprobe is currently only x86_64 and isn't expected to ever be
supported in i386.
Fixes: ff474a78cef5 ("uprobe: Add uretprobe syscall to speed up return probe")
Reported-by: Rafael Buchbinder <rafi@rbk.io>
Closes: https://lore.kernel.org/lkml/CAHsH6Gs3Eh8DFU0wq58c_LF8A4_+o6z456J7BidmcVY2AqOnHQ@mail.gmail.com/
Link: https://lore.kernel.org/lkml/20250121182939.33d05470@gandalf.local.home/T/#me2676c378eff2d6a33f3054fed4a5f3afa64e65b
Link: https://lore.kernel.org/lkml/20250128145806.1849977-1-eyal.birger@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20250202162921.335813-2-eyal.birger@gmail.com
[kees: minimized changes for easier backporting, tweaked commit log]
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
In union test_small_end, the small members are three and four.
Fixes: e71a29db79da1946 ("stackinit: Add union initialization to selftests")
Closes: https://lore.kernel.org/CAMuHMdWvcKOc6v5o3-9-SqP_4oh5-GZQjZZb=-krhY=mVRED_Q@mail.gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3f8faa2d7d0d6b36571093ab0fb1fd5157abd7bb.1738593178.git.geert+renesas@glider.be
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The stack frame on m68k is very sensitive to the size of what needs to
be stored. Like done for long string testing, reduce the size of the
large trailing struct in the union initialization testing.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdXW8VbtOAixO7w+aDOG70aZtZ50j1Ybcr8B3eYnRUcrcA@mail.gmail.com
Fixes: e71a29db79da ("stackinit: Add union initialization to selftests")
Link: https://lore.kernel.org/r/20250204174509.work.711-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
Sean Christopherson
Linus Torvalds
Rafael J. Wysocki
Steven Rostedt
Nathan Chancellor
WangYuli
Hector Martin
Pavel Machek
Mateusz Guzik
Christian Brauner
Amir Goldstein
Miklos Szeredi
Andreas Gruenbacher
Brahmajit Das
Su Hui
Frederic Weisbecker
Geert Uytterhoeven
Kent Overstreet
Jeongjun Park
Kees Cook
Alice Ryhl
Eyal Birger