aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/gecko.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2025-06-04wifi: iwlwifi: pcie: fix non-MSIX handshake registerJohannes Berg1-1/+1
When reading the interrupt status after a FW reset handshake timeout, read the actual value not the mask for the non-MSIX case. Fixes: ab606dea80c4 ("wifi: iwlwifi: pcie: add support for the reset handshake in MSI") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250604061200.87a849a55086.I2f8571aafa55aa3b936a30b938de9d260592a584@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-06-04wifi: iwlwifi: mld: avoid panic on init failureMiri Korenblit1-1/+2
In case of an error during init, in_hw_restart will be set, but it will never get cleared. Instead, we will retry to init again, and then we will act like we are in a restart when we are actually not. This causes (among others) to a NULL pointer dereference when canceling rx_omi::finished_work, that was not even initialized, because we thought that we are in hw_restart. Set in_hw_restart to true only if the fw is running, then we know that FW was loaded successfully and we are not going to the retry loop. Fixes: 7391b2a4f7db ("wifi: iwlwifi: rework firmware error handling") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250604061200.e0040e0a4b09.Iae469a0abe6bfa3c26d8a88c066bad75c2e8f121@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-06-04wifi: iwlwifi: mvm: fix assert on suspendMiri Korenblit1-2/+2
After using DEFINE_RAW_FLEX, cmd is a pointer to iwl_rxq_sync_cmd, and not a variable containing both the command and notification. Adjust hcmd->data and hcmd->len assignment as well. Fixes: 7438843df8cf ("wifi: iwlwifi: mvm: Avoid -Wflex-array-member-not-at-end warning") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250604031321.2277481-2-miriam.rachel.korenblit@intel.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-05-28selftests/bpf: Fix bpf selftest build warningSaket Kumar Bhaskar1-3/+3
On linux-next, build for bpf selftest displays a warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/if_xdp.h' differs from latest version at 'include/uapi/linux/if_xdp.h'. Commit 8066e388be48 ("net: add UAPI to the header guard in various network headers") changed the header guard from _LINUX_IF_XDP_H to _UAPI_LINUX_IF_XDP_H in include/uapi/linux/if_xdp.h. To resolve the warning, update tools/include/uapi/linux/if_xdp.h to align with the changes in include/uapi/linux/if_xdp.h Fixes: 8066e388be48 ("net: add UAPI to the header guard in various network headers") Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Closes: https://lore.kernel.org/all/c2bc466d-dff2-4d0d-a797-9af7f676c065@linux.ibm.com/ Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://patch.msgid.link/20250527054138.1086006-1-skb99@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-28selftests: netfilter: Fix skip of wildcard interface testPhil Sutter1-2/+5
The script is supposed to skip wildcard interface testing if unsupported by the host's nft tool. The failing check caused script abort due to 'set -e' though. Fix this by running the potentially failing nft command inside the if-conditional pipe. Fixes: 73db1b5dab6f ("selftests: netfilter: Torture nftables netdev hooks") Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://patch.msgid.link/20250527094117.18589-1-phil@nwl.cc Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-28net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 framesHoratiu Vultur1-1/+3
We have noticed that when PHY timestamping is enabled, L2 frames seems to be modified by changing two 2 bytes with a value of 0. The place were these 2 bytes seems to be random(or I couldn't find a pattern). In most of the cases the userspace can ignore these frames but if for example those 2 bytes are in the correction field there is nothing to do. This seems to happen when configuring the HW for IPv4 even that the flow is not enabled. These 2 bytes correspond to the UDPv4 checksum and once we don't enable clearing the checksum when using L2 frames then the frame doesn't seem to be changed anymore. Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20250523082716.2935895-1-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-28net: openvswitch: Fix the dead loop of MPLS parseFaicker Mo1-1/+1
The unexpected MPLS packet may not end with the bottom label stack. When there are many stacks, The label count value has wrapped around. A dead loop occurs, soft lockup/CPU stuck finally. stack backtrace: UBSAN: array-index-out-of-bounds in /build/linux-0Pa0xK/linux-5.15.0/net/openvswitch/flow.c:662:26 index -1 is out of range for type '__be32 [3]' CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Tainted: G OE 5.15.0-121-generic #131-Ubuntu Hardware name: Dell Inc. PowerEdge C6420/0JP9TF, BIOS 2.12.2 07/14/2021 Call Trace: <IRQ> show_stack+0x52/0x5c dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_out_of_bounds.cold+0x44/0x49 key_extract_l3l4+0x82a/0x840 [openvswitch] ? kfree_skbmem+0x52/0xa0 key_extract+0x9c/0x2b0 [openvswitch] ovs_flow_key_extract+0x124/0x350 [openvswitch] ovs_vport_receive+0x61/0xd0 [openvswitch] ? kernel_init_free_pages.part.0+0x4a/0x70 ? get_page_from_freelist+0x353/0x540 netdev_port_receive+0xc4/0x180 [openvswitch] ? netdev_port_receive+0x180/0x180 [openvswitch] netdev_frame_hook+0x1f/0x40 [openvswitch] __netif_receive_skb_core.constprop.0+0x23a/0xf00 __netif_receive_skb_list_core+0xfa/0x240 netif_receive_skb_list_internal+0x18e/0x2a0 napi_complete_done+0x7a/0x1c0 bnxt_poll+0x155/0x1c0 [bnxt_en] __napi_poll+0x30/0x180 net_rx_action+0x126/0x280 ? bnxt_msix+0x67/0x80 [bnxt_en] handle_softirqs+0xda/0x2d0 irq_exit_rcu+0x96/0xc0 common_interrupt+0x8e/0xa0 </IRQ> Fixes: fbdcdd78da7c ("Change in Openvswitch to support MPLS label depth of 3 in ingress direction") Signed-off-by: Faicker Mo <faicker.mo@zenlayer.com> Acked-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Aaron Conole <aconole@redhat.com> Link: https://patch.msgid.link/259D3404-575D-4A6D-B263-1DF59A67CF89@zenlayer.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-28calipso: Don't call calipso functions for AF_INET sk.Kuniyuki Iwashima1-0/+3
syzkaller reported a null-ptr-deref in txopt_get(). [0] The offset 0x70 was of struct ipv6_txoptions in struct ipv6_pinfo, so struct ipv6_pinfo was NULL there. However, this never happens for IPv6 sockets as inet_sk(sk)->pinet6 is always set in inet6_create(), meaning the socket was not IPv6 one. The root cause is missing validation in netlbl_conn_setattr(). netlbl_conn_setattr() switches branches based on struct sockaddr.sa_family, which is passed from userspace. However, netlbl_conn_setattr() does not check if the address family matches the socket. The syzkaller must have called connect() for an IPv6 address on an IPv4 socket. We have a proper validation in tcp_v[46]_connect(), but security_socket_connect() is called in the earlier stage. Let's copy the validation to netlbl_conn_setattr(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 2 UID: 0 PID: 12928 Comm: syz.9.1677 Not tainted 6.12.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:txopt_get include/net/ipv6.h:390 [inline] RIP: 0010: Code: 02 00 00 49 8b ac 24 f8 02 00 00 e8 84 69 2a fd e8 ff 00 16 fd 48 8d 7d 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 53 02 00 00 48 8b 6d 70 48 85 ed 0f 84 ab 01 00 RSP: 0018:ffff88811b8afc48 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: 1ffff11023715f8a RCX: ffffffff841ab00c RDX: 000000000000000e RSI: ffffc90007d9e000 RDI: 0000000000000070 RBP: 0000000000000000 R08: ffffed1023715f9d R09: ffffed1023715f9e R10: ffffed1023715f9d R11: 0000000000000003 R12: ffff888123075f00 R13: ffff88810245bd80 R14: ffff888113646780 R15: ffff888100578a80 FS: 00007f9019bd7640(0000) GS:ffff8882d2d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f901b927bac CR3: 0000000104788003 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <TASK> calipso_sock_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:557 netlbl_conn_setattr+0x10c/0x280 net/netlabel/netlabel_kapi.c:1177 selinux_netlbl_socket_connect_helper+0xd3/0x1b0 security/selinux/netlabel.c:569 selinux_netlbl_socket_connect_locked security/selinux/netlabel.c:597 [inline] selinux_netlbl_socket_connect+0xb6/0x100 security/selinux/netlabel.c:615 selinux_socket_connect+0x5f/0x80 security/selinux/hooks.c:4931 security_socket_connect+0x50/0xa0 security/security.c:4598 __sys_connect_file+0xa4/0x190 net/socket.c:2067 __sys_connect+0x12c/0x170 net/socket.c:2088 __do_sys_connect net/socket.c:2098 [inline] __se_sys_connect net/socket.c:2095 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:2095 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xaa/0x1b0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f901b61a12d Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9019bd6fa8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00007f901b925fa0 RCX: 00007f901b61a12d RDX: 000000000000001c RSI: 0000200000000140 RDI: 0000000000000003 RBP: 00007f901b701505 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f901b5b62a0 R15: 00007f9019bb7000 </TASK> Modules linked in: Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.") Reported-by: syzkaller <syzkaller@googlegroups.com> Reported-by: John Cheung <john.cs.hey@gmail.com> Closes: https://lore.kernel.org/netdev/CAP=Rh=M1LzunrcQB1fSGauMrJrhL6GGps5cPAKzHJXj6GQV+-g@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Paul Moore <paul@paul-moore.com> Link: https://patch.msgid.link/20250522221858.91240-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-28selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netemPedro Tammela1-0/+35
Reproduce the UAF scenario where netem is a child of HFSC and HFSC is configured to use the eltree. In such case, this TDC test would cause the HFSC class to be added to the eltree twice resulting in a UAF. Reviewed-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://patch.msgid.link/20250522181448.1439717-3-pctammela@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-28net_sched: hfsc: Address reentrant enqueue adding class to eltree twicePedro Tammela1-1/+8
Savino says: "We are writing to report that this recent patch (141d34391abbb315d68556b7c67ad97885407547) [1] can be bypassed, and a UAF can still occur when HFSC is utilized with NETEM. The patch only checks the cl->cl_nactive field to determine whether it is the first insertion or not [2], but this field is only incremented by init_vf [3]. By using HFSC_RSC (which uses init_ed) [4], it is possible to bypass the check and insert the class twice in the eltree. Under normal conditions, this would lead to an infinite loop in hfsc_dequeue for the reasons we already explained in this report [5]. However, if TBF is added as root qdisc and it is configured with a very low rate, it can be utilized to prevent packets from being dequeued. This behavior can be exploited to perform subsequent insertions in the HFSC eltree and cause a UAF." To fix both the UAF and the infinite loop, with netem as an hfsc child, check explicitly in hfsc_enqueue whether the class is already in the eltree whenever the HFSC_RSC flag is set. [1] https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=141d34391abbb315d68556b7c67ad97885407547 [2] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1572 [3] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L677 [4] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1574 [5] https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/T/#u Fixes: 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs") Reported-by: Savino Dicanosa <savy@syst3mfailure.io> Reported-by: William Liu <will@willsroot.io> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://patch.msgid.link/20250522181448.1439717-2-pctammela@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-28octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callbackHariprasad Kelam1-3/+1
This patch addresses below issues, 1. Active traffic on the leaf node must be stopped before its send queue is reassigned to the parent. This patch resolves the issue by marking the node as 'Inner'. 2. During a system reboot, the interface receives TC_HTB_LEAF_DEL and TC_HTB_LEAF_DEL_LAST callbacks to delete its HTB queues. In the case of TC_HTB_LEAF_DEL_LAST, although the same send queue is reassigned to the parent, the current logic still attempts to update the real number of queues, leadning to below warnings New queues can't be registered after device unregistration. WARNING: CPU: 0 PID: 6475 at net/core/net-sysfs.c:1714 netdev_queue_update_kobjects+0x1e4/0x200 Fixes: 5e6808b4c68d ("octeontx2-pf: Add support for HTB offload") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250522115842.1499666-1-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-28octeontx2-pf: QOS: Perform cache sync on send queue teardownHariprasad Kelam1-0/+22
QOS is designed to create a new send queue whenever a class is created, ensuring proper shaping and scheduling. However, when multiple send queues are created and deleted in a loop, SMMU errors are observed. This patch addresses the issue by performing an data cache sync during the teardown of QOS send queues. Fixes: ab6dddd2a669 ("octeontx2-pf: qos send queues management") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250522094742.1498295-1-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-28net: mana: Add support for Multi Vports on Bare metalHaiyang Zhang2-9/+19
To support Multi Vports on Bare metal, increase the device config response version. And, skip the register HW vport, and register filter steps, when the Bare metal hostmode is set. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://patch.msgid.link/1747671636-5810-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-27net: devmem: ncdevmem: remove unused variableMina Almasry1-1/+0
This variable is unused and can be removed. Signed-off-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250523230524.1107879-9-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: devmem: ksft: upgrade rx test to send 1K dataMina Almasry1-3/+5
The current test just sends "hello\nworld" and verifies that is the string received on the RX side. That is fine, but improve the test a bit by sending 1K data. The test should be improved further to send more data, but for now this should be a welcome improvement. The test will send a repeating pattern of 0x01, 0x02, ... 0x06. The ncdevmem `-v 7` flag will verify this pattern. ncdevmem will provide useful debugging info when the test fails, such as the frags received and verified fine, and which frag exactly failed, what was the expected byte pattern, and what is the actual byte pattern received. All this debug information will be useful when the test fails. Signed-off-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250523230524.1107879-8-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: devmem: ksft: add 5 tuple FS supportMina Almasry2-4/+15
ncdevmem supports drivers that are limited to either 3-tuple or 5-tuple FS support, but the ksft is currently 3-tuple only. Support drivers that have 5-tuple FS supported by adding a ksft arg. Signed-off-by: Mina Almasry <almasrymina@google.com> fix 5-tuple fix 5-tuple Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250523230524.1107879-7-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: devmem: ksft: add exit_wait to make rx test passMina Almasry1-1/+1
This exit_wait seems necessary to make the rx side test pass for me. I think this is just missed from the original test add patch. Add it now. Signed-off-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250523230524.1107879-6-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: devmem: ksft: add ipv4 supportMina Almasry1-9/+7
ncdevmem supports both ipv4 and ipv6, but the ksft is currently ipv6-only. Propagate the ipv4 support to the ksft, so that folks that are limited to these networks can also test. Signed-off-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250523230524.1107879-5-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: devmem: preserve sockc_errMina Almasry1-14/+10
Preserve the error code returned by sock_cmsg_send and return that on err. Signed-off-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250523230524.1107879-4-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27page_pool: fix ugly page_pool formattingMina Almasry1-2/+2
Minor cleanup; this line is badly formatted. Signed-off-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250523230524.1107879-3-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: devmem: move list_add to net_devmem_bind_dmabuf.Mina Almasry3-8/+10
It's annoying for the list_add to be outside net_devmem_bind_dmabuf, but the list_del is in net_devmem_unbind_dmabuf. Make it consistent by having both the list_add/del be inside the net_devmem_[un]bind_dmabuf. Cc: ap420073@gmail.com Signed-off-by: Mina Almasry <almasrymina@google.com> Tested-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250523230524.1107879-2-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27selftests: netfilter: nft_queue.sh: include file transfer duration in log messageFlorian Westphal1-7/+31
Paolo Abeni says: Recently the nipa CI infra went through some tuning, and the mentioned self-test now often fails. The failing test is the sctp+nfqueue one, where the file transfer takes too long and hits the timeout (1 minute). Because SCTP nfqueue tests had timeout related issues before (esp. on debug kernels) print the file transfer duration in the PASS/FAIL message. This would aallow us to see if there is/was an unexpected slowdown (CI keeps logs around) or 'creeping slowdown' where things got slower over time until 'fail point' was reached. Output of altered lines looks like this: PASS: tcp and nfqueue in forward chan (duration: 2s) PASS: tcp via loopback (duration: 2s) PASS: sctp and nfqueue in forward chain (duration: 42s) PASS: sctp and nfqueue in output chain with GSO (duration: 21s) Reported-by: Paolo Abeni <pabeni@redhat.com Closes: https://lore.kernel.org/netdev/584524ef-9fd7-4326-9f1b-693ca62c5692@redhat.com/ Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20250523121700.20011-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: phy: mscc: Fix memory leak when using one step timestampingHoratiu Vultur1-5/+11
Fix memory leak when running one-step timestamping. When running one-step sync timestamping, the HW is configured to insert the TX time into the frame, so there is no reason to keep the skb anymore. As in this case the HW will never generate an interrupt to say that the frame was timestamped, then the frame will never released. Fix this by freeing the frame in case of one-step timestamping. Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20250522115722.2827199-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27sctp: mark sctp_do_peeloff staticChristoph Hellwig2-4/+2
sctp_do_peeloff is only used inside of net/sctp/socket.c, so mark it static. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20250526054745.2329201-1-hch@lst.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devicesRengarajan S1-2/+16
Maximum OTP and EEPROM size for hearthstone PCI1xxxx devices are 8 Kb and 64 Kb respectively. Adjust max size definitions and return correct EEPROM length based on device. Also prevent out-of-bound read/write. Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://patch.msgid.link/20250523173326.18509-1-rengarajan.s@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: txgbe: Support the FDIR rules assigned to VFsJiawen Wu3-12/+24
When SR-IOV is enabled, the FDIR rule is supported to filter packets to VFs. The action queue id is calculated as an absolute id. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/BE7EA355FDDAAA97+20250523080438.27968-2-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: libwx: Fix statistics of multicast packetsJiawen Wu1-1/+2
When SR-IOV is enabled, the number of multicast packets is mistakenly counted starting from queue 0. It would be a wrong count that includes the packets received on VF. Fix it to count from the correct offset. Fixes: c52d4b898901 ("net: libwx: Redesign flow when sriov is enabled") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/F70910CFE86C1F6F+20250523080438.27968-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: lan743x: Fix PHY reset handling during initialization and WOLThangaraj Samynathan1-9/+4
Remove lan743x_phy_init from lan743x_hardware_init as it resets the PHY registers, causing WOL to fail on subsequent attempts. Add a call to lan743x_hw_reset_phy in the probe function to ensure the PHY is reset during device initialization. Fixes: 23f0703c125be ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250526053048.287095-3-thangaraj.s@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: lan743x: rename lan743x_reset_phy to lan743x_hw_reset_phyThangaraj Samynathan1-2/+2
rename the function to lan743x_hw_reset_phy to better describe it operation. Fixes: 23f0703c125be ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250526053048.287095-2-thangaraj.s@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: macb: Check return value of dma_set_mask_and_coherent()Sergio Perez Gonzalez1-1/+5
Issue flagged by coverity. Add a safety check for the return value of dma_set_mask_and_coherent, go to a safe exit if it returns error. Link: https://scan7.scan.coverity.com/#/project-view/53936/11354?selectedIssue=1643754 Signed-off-by: Sergio Perez Gonzalez <sperezglz@gmail.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://patch.msgid.link/20250526032034.84900-1-sperezglz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: phy: fix up const issues in to_mdio_device() and to_phy_device()Greg Kroah-Hartman2-8/+2
Both to_mdio_device() and to_phy_device() "throw away" the const pointer attribute passed to them and return a non-const pointer, which generally is not a good thing overall. Fix this up by using container_of_const() which was designed for this very problem. Cc: Alexander Lobakin <alobakin@pm.me> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Fixes: 7eab14de73a8 ("mdio, phy: fix -Wshadow warnings triggered by nested container_of()") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/2025052246-conduit-glory-8fc9@gregkh Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: Kconfig NET_DEVMEM selects GENERIC_ALLOCATORSaeed Mahameed1-1/+1
GENERIC_ALLOCATOR is a non-prompt kconfig, meaning users can't enable it selectively. All kconfig users of GENERIC_ALLOCATOR select it, except of NET_DEVMEM which only depends on it, there is no easy way to turn GENERIC_ALLOCATOR on unless we select other unnecessary configs that will select it. Instead of depending on it, select it when NET_DEVMEM is enabled. Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/1747950086-1246773-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27selftests: net: move wait_local_port_listen to lib.shHangbin Liu15-38/+29
The function wait_local_port_listen() is the only function defined in net_helper.sh. Since some tests source both lib.sh and net_helper.sh, we can simplify the setup by moving wait_local_port_listen() to lib.sh. With this change, net_helper.sh becomes redundant and can be removed. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250526014600.9128-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27cxgb4: Constify struct thermal_zone_device_opsChristophe JAILLET1-1/+1
'struct thermal_zone_device_ops' are not modified in this driver. Constifying these structures moves some data to a read-only section, so increases overall security, especially when the structure holds some function pointers. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 2912 1064 0 3976 f88 drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o After: ===== text data bss dec hex filename 3040 936 0 3976 f88 drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/e6416e0d15ea27a55fe1fb4e349928ac7bae1b95.1748164843.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27mlxsw: core_thermal: Constify struct thermal_zone_device_opsChristophe JAILLET1-4/+4
'struct thermal_zone_device_ops' are not modified in this driver. Constifying these structures moves some data to a read-only section, so increases overall security, especially when the structure holds some function pointers. While at it, also constify a struct thermal_zone_params. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 24899 8036 0 32935 80a7 drivers/net/ethernet/mellanox/mlxsw/core_thermal.o After: ===== text data bss dec hex filename 25379 7556 0 32935 80a7 drivers/net/ethernet/mellanox/mlxsw/core_thermal.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/4516676973f5adc1cdb76db1691c0f98b6fa6614.1748164348.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net/mlx5: HWS, Fix an error code in mlx5hws_bwc_rule_create_complex()Dan Carpenter1-1/+1
This was intended to be negative -ENOMEM but the '-' character was left off accidentally. This typo doesn't affect runtime because the caller treats all non-zero returns the same. Fixes: 17e0accac577 ("net/mlx5: HWS, support complex matchers") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/aDCbjNcquNC68Hyj@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27tipc: use kfree_sensitive() for aead cleanupZilin Guan1-1/+1
The tipc_aead_free() function currently uses kfree() to release the aead structure. However, this structure contains sensitive information, such as key's SALT value, which should be securely erased from memory to prevent potential leakage. To enhance security, replace kfree() with kfree_sensitive() when freeing the aead structure. This change ensures that sensitive data is explicitly cleared before memory deallocation, aligning with the approach used in tipc_aead_init() and adhering to best practices for handling confidential information. Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech> Link: https://patch.msgid.link/20250523114717.4021518-1-zilin@seu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27tools: ynl: parse extack for sub-messagesDonald Hunter1-14/+25
Extend the Python YNL extack decoding to handle sub-messages in the same way that YNL C does. This involves retaining the input values so that they are available during extack decoding. ./tools/net/ynl/pyynl/cli.py --family rt-link --do newlink --create \ --json '{ "linkinfo": {"kind": "netkit", "data": {"policy": 10} } }' Netlink error: Invalid argument nl_len = 92 (76) nl_flags = 0x300 nl_type = 2 error: -22 extack: {'msg': 'Provided default xmit policy not supported', 'bad-attr': '.linkinfo.data(netkit).policy'} Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20250523103031.80236-1-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: mctp: start tx queue on netdev openJeremy Kerr1-0/+2
We stop queues in ndo_stop, so they need to be restarted in ndo_open. This allows us to resume tx after a link down/up cycle. Suggested-by: Nitin Singh <nitsingh@nvidia.com> Fixes: 0791c0327a6e ("net: mctp: Add MCTP USB transport driver") Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://patch.msgid.link/20250526-dev-mctp-usb-v1-1-c7bd6cb75aa0@codeconstruct.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net/mlx5: Add error handling in mlx5_query_nic_vport_node_guid()Wentao Liang1-3/+6
The function mlx5_query_nic_vport_node_guid() calls the function mlx5_query_nic_vport_context() but does not check its return value. A proper implementation can be found in mlx5_nic_vport_query_local_lb(). Add error handling for mlx5_query_nic_vport_context(). If it fails, free the out buffer via kvfree() and return error code. Fixes: 9efa75254593 ("net/mlx5_core: Introduce access functions to query vport RoCE fields") Cc: stable@vger.kernel.org # v4.5 Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250524163425.1695-1-vulab@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: airoha: Fix an error handling path in airoha_alloc_gdm_port()Christophe JAILLET1-1/+9
If register_netdev() fails, the error handling path of the probe will not free the memory allocated by the previous airoha_metadata_dst_alloc() call because port->dev->reg_state will not be NETREG_REGISTERED. So, an explicit airoha_metadata_dst_free() call is needed in this case to avoid a memory leak. Fixes: af3cf757d5c9 ("net: airoha: Move DSA tag in DMA descriptor") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1b94b91345017429ed653e2f05d25620dc2823f9.1746715755.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: phy: clear phydev->devlink when the link is deletedWei Fang1-1/+3
There is a potential crash issue when disabling and re-enabling the network port. When disabling the network port, phy_detach() calls device_link_del() to remove the device link, but it does not clear phydev->devlink, so phydev->devlink is not a NULL pointer. Then the network port is re-enabled, but if phy_attach_direct() fails before calling device_link_add(), the code jumps to the "error" label and calls phy_detach(). Since phydev->devlink retains the old value from the previous attach/detach cycle, device_link_del() uses the old value, which accesses a NULL pointer and causes a crash. The simplified crash log is as follows. [ 24.702421] Call trace: [ 24.704856] device_link_put_kref+0x20/0x120 [ 24.709124] device_link_del+0x30/0x48 [ 24.712864] phy_detach+0x24/0x168 [ 24.716261] phy_attach_direct+0x168/0x3a4 [ 24.720352] phylink_fwnode_phy_connect+0xc8/0x14c [ 24.725140] phylink_of_phy_connect+0x1c/0x34 Therefore, phydev->devlink needs to be cleared when the device link is deleted. Fixes: bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250523083759.3741168-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: phy: mediatek: Add Airoha AN7583 PHY supportChristian Marangi1-0/+20
Add Airoha AN7583 PHY support based on Airoha AN7581 with the small difference that BMCR_PDOWN is enabled by default and needs to be cleared to make the internal PHY correctly work. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250522165313.6411-4-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27net: dsa: mt7530: Add AN7583 supportChristian Marangi3-6/+37
Add Airoha AN7583 Switch support. This is based on Airoha EN7581 that is based on Mediatek MT7988 Switch. Airoha AN7583 require additional tweak to the GEPHY_CONN_CFG register to make the internal PHY work. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250522165313.6411-3-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27dt-bindings: net: dsa: mediatek,mt7530: Add airoha,an7583-switchChristian Marangi1-0/+5
Add airoha,an7583-switch additional compatible to the mt7530 DSA Switch Family. This is an exact match of the airoha,en7581-switch (based on mt7988-switch) with the additional requirement of tweak on the GEPHY_CONN_CFG registers to make the internal PHY actually work. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20250522165313.6411-2-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-27Remove legacy 'cc-disable-warning' use from the generic build scriptsLinus Torvalds1-16/+16
This just converts the 'cc-disable-warning' uses in the generic makefile extrawarn script to use the plain 'cc-option' form instead. Partly to clean things up, and partly just to have the new form get some proper test coverage. I'll leave the various random other uses of 'cc-disable-warning' alone and let subsystem maintainers decide if they want to convert to the new unified model. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-05-27Make 'cc-option' work correctly for the -Wno-xyzzy patternLinus Torvalds1-2/+2
This is the follow-up to commit a79be02bba5c ("Fix mis-uses of 'cc-option' for warning disablement") where I mentioned that the best fix would be to just make 'cc-option' a bit smarter, and work for all compiler options, including the '-Wno-xyzzy' pattern that it used to accept unknown options for. It turns out that fixing cc-option is pretty straightforward: just rewrite any '-Wno-xyzzy' option pattern to use '-Wxyzzy' instead for testing. That makes the whole artificial distinction between 'cc-option' and 'cc-disable-warning' go away, and we can happily forget about the odd build rule that you have to treat compiler options that disable warnings specially. The 'cc-disable-warning' helper remains as a backwards compatibility syntax for now, but is implemented in terms of the new and improved cc-option. Acked-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-05-27btrfs: don't drop a reference if btrfs_check_write_meta_pointer() failsJosef Bacik1-1/+0
In the zoned mode there's a bug in the extent buffer tree conversion to xarray. The reference for eb is dropped and code continues but the references get dropped by releasing the batch. Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/linux-btrfs/202505191521.435b97ac-lkp@intel.com/ Fixes: 19d7f65f032f ("btrfs: convert the buffer_radix to an xarray") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-05-27Doc: networking: Fix various typos in rds.rstdeveldavem/net-nextAlok Tiwari1-4/+4
Corrected "sages" to "messages" in the bitmap allocation description. Fixed "competed" to "completed" in the recv path datagram handling section. Corrected "privatee" to "private" in the multipath RDS section. Fixed "mutlipath" to "multipath" in the transport capabilities description. These changes improve documentation clarity and maintain consistency. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Link: https://patch.msgid.link/20250522074413.3634446-1-alok.a.tiwari@oracle.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-27net/mlx5e: Allow setting MAC address of representorsMark Bloch1-0/+1
A representor netdev does not correspond to real hardware that needs to be updated when setting the MAC address. The default eth_mac_addr() is sufficient for simply updating the netdev's MAC address with validation. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1747898036-1121904-1-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.