aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/syscall-counts.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2012-03-04ARM: tegra: build localtimer support only when neededArnd Bergmann1-1/+2
It is possible to build a tegra kernel without localtimer support, so the tegra specific parts should only be built when that is indeed enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-04ARM: tegra: select CPU_FREQ_TABLEArnd Bergmann1-0/+2
The tegra cpufreq implementation relies on the cpu_freq_table code, so make sure that this is always there when needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-26ARM: tegra: select required CPU and L2 errata optionsStephen Warren1-0/+12
The ARM IP revisions in Tegra are: Tegra20: CPU r1p1, PL310 r2p0 Tegra30: CPU A01=r2p7/>=A02=r2p9, NEON r2p3-50, PL310 r3p1-50 Based on work by Olof Johansson, although the actual list of errata is somewhat different here, since I added a bunch more and removed one PL310 erratum that doesn't seem applicable. Signed-off-by: Stephen Warren <swarren@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-06ARM: tegra: paz00: fix wrong UART port on mini-pcie plugMarc Dietrich2-6/+6
UARTC is connected to the mini-pcie port. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-06ARM: tegra: paz00: fix wrong SD1 power gpioMarc Dietrich2-2/+2
The power gpio for the external memory card was specified wrongly. Replace it with the correct value (tested with warmboot with fastboot). Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-31Linux 3.3-rc2Linus Torvalds1-1/+1
2012-01-30af_unix: fix EPOLLET regression for stream socketsEric Dumazet1-15/+4
Commit 0884d7aa24 (AF_UNIX: Fix poll blocking problem when reading from a stream socket) added a regression for epoll() in Edge Triggered mode (EPOLLET) Appropriate fix is to use skb_peek()/skb_unlink() instead of skb_dequeue(), and only call skb_unlink() when skb is fully consumed. This remove the need to requeue a partial skb into sk_receive_queue head and the extra sk->sk_data_ready() calls that added the regression. This is safe because once skb is given to sk_receive_queue, it is not modified by a writer, and readers are serialized by u->readlock mutex. This also reduce number of spinlock acquisition for small reads or MSG_PEEK users so should improve overall performance. Reported-by: Nick Mathewson <nickm@freehaven.net> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Alexey Moiseytsev <himeraster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-30tcp: fix tcp_trim_head() to adjust segment count with skb MSSNeal Cardwell1-4/+2
This commit fixes tcp_trim_head() to recalculate the number of segments in the skb with the skb's existing MSS, so trimming the head causes the skb segment count to be monotonically non-increasing - it should stay the same or go down, but not increase. Previously tcp_trim_head() used the current MSS of the connection. But if there was a decrease in MSS between original transmission and ACK (e.g. due to PMTUD), this could cause tcp_trim_head() to counter-intuitively increase the segment count when trimming bytes off the head of an skb. This violated assumptions in tcp_tso_acked() that tcp_trim_head() only decreases the packet count, so that packets_acked in tcp_tso_acked() could underflow, leading tcp_clean_rtx_queue() to pass u32 pkts_acked values as large as 0xffffffff to ca_ops->pkts_acked(). As an aside, if tcp_trim_head() had really wanted the skb to reflect the current MSS, it should have called tcp_set_skb_tso_segs() unconditionally, since a decrease in MSS would mean that a single-packet skb should now be sliced into multiple segments. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-30net/tcp: Fix tcp memory limits initialization when !CONFIG_SYSCTLGlauber Costa3-3/+16
sysctl_tcp_mem() initialization was moved to sysctl_tcp_ipv4.c in commit 3dc43e3e4d0b52197d3205214fe8f162f9e0c334, since it became a per-ns value. That code, however, will never run when CONFIG_SYSCTL is disabled, leading to bogus values on those fields - causing hung TCP sockets. This patch fixes it by keeping an initialization code in tcp_init(). It will be overwritten by the first net namespace init if CONFIG_SYSCTL is compiled in, and do the right thing if it is compiled out. It is also named properly as tcp_init_mem(), to properly signal its non-sysctl side effect on TCP limits. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Glauber Costa <glommer@parallels.com> Cc: David S. Miller <davem@davemloft.net> Link: http://lkml.kernel.org/r/4F22D05A.8030604@parallels.com [ renamed the function, tidied up the changelog a bit ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-30vmwgfx: Fix assignment in vmw_framebuffer_create_handleRyan Mallon1-1/+1
The assignment of handle in vmw_framebuffer_create_handle doesn't actually do anything useful and is incorrectly assigning an integer value to a pointer argument. It appears that this is a typo and should be dereferencing handle rather than assigning to it directly. This fixes a bug where an undefined handle value is potentially returned to user-space. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Reviewed-by: Jakob Bornecrantz<jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-30drm/radeon/kms: Fix device tree linkage of i2c busesJean Delvare1-0/+1
Properly set the parent device of i2c buses before registering them so that they will show at the right place in the device tree (rather than in /sys/devices directly.) Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-30drm: Pass the real error code back during GEM bo initialisationChris Wilson1-1/+1
In particular, I found I was hitting the max-file limit in the VFS, and the EFILE was being magically transformed into ENOMEM. Confusion reigns. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-30Revert "drm/i810: cleanup reclaim_buffers"Daniel Vetter3-13/+11
This reverts commit 87499ffdcb1c70f66988cd8febc4ead0ba2f9118. Where is that paper bag ... ah here. I've failed to take an odd interaction between my other cleanups and this reclaim_buffers patch into account and also failed to properly test it. Looks like there are more dragons and hidden trapdoors in the drm release path than actual lines of code. Until I get a clue, let's just revert this. Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-29hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776FGuenter Roeck1-0/+6
NCT6776F only supports pwm mode for pwm2 and pwm3. Return error if an attempt is made to set those pwm channels to DC mode. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-29PM / Hibernate: Fix s2disk regression related to freezing workqueuesRafael J. Wysocki3-0/+30
Commit 2aede851ddf08666f68ffc17be446420e9d2a056 PM / Hibernate: Freeze kernel threads after preallocating memory introduced a mechanism by which kernel threads were frozen after the preallocation of hibernate image memory to avoid problems with frozen kernel threads not responding to memory freeing requests. However, it overlooked the s2disk code path in which the SNAPSHOT_CREATE_IMAGE ioctl was run directly after SNAPSHOT_FREE, which caused freeze_workqueues_begin() to BUG(), because it saw that worqueues had been already frozen. Although in principle this issue might be addressed by removing the relevant BUG_ON() from freeze_workqueues_begin(), that would reintroduce the very problem that commit 2aede851ddf08666f68ffc17be4 attempted to avoid into that particular code path. For this reason, to fix the issue at hand, introduce thaw_kernel_threads() and make the SNAPSHOT_FREE ioctl execute it. Special thanks to Srivatsa S. Bhat for detailed analysis of the problem. Reported-and-tested-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: stable@kernel.org
2012-01-29hwmon: (sht15) fix bad error codeVivien Didelot1-1/+2
When no platform data was supplied, returned error code was 0. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: stable@vger.kernel.org # 2.6.32+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-28Logfs: Allow NULL block_isbad() methodsJoern Engel1-14/+12
Not all mtd drivers define block_isbad(). Let's assume no bad blocks instead of refusing to mount. Signed-off-by: Joern Engel <joern@logfs.org>
2012-01-28logfs: Grow inode in delete pathJoern Engel1-0/+4
Can be necessary if an inode gets deleted (through -ENOSPC) before being written. Might be better to move this into logfs_write_rec(), but for now go with the stupid&safe patch. Signed-off-by: Joern Engel <joern@logfs.org>
2012-01-28logfs: Free areas before calling generic_shutdown_super()Joern Engel3-4/+12
Or hit an assertion in map_invalidatepage() instead. Signed-off-by: Joern Engel <joern@logfs.org>
2012-01-28logfs: remove useless BUG_ONJoern Engel1-1/+0
It prevents write sizes >4k. Signed-off-by: Joern Engel <joern@logfs.org>
2012-01-28MAINTAINERS: Add Prasad Joshi in LogFS maintinersPrasad Joshi1-0/+1
Acked-by: Joern Engel <joern@logfs.org> Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
2012-01-28logfs: Propagate page parameter to __logfs_write_inodePrasad Joshi4-9/+9
During GC LogFS has to rewrite each valid block to a separate segment. Rewrite operation reads data from an old segment and writes it to a newly allocated segment. Since every write operation changes data block pointers maintained in inode, inode should also be rewritten. In GC path to avoid AB-BA deadlock LogFS marks a page with PG_pre_locked in addition to locking the page (PG_locked). The page lock is ignored iff the page is pre-locked. LogFS uses a special file called segment file. The segment file maintains an 8 bytes entry for every segment. It keeps track of erase count, level etc. for every segment. Bad things happen with a segment belonging to the segment file is GCed ------------[ cut here ]------------ kernel BUG at /home/prasad/logfs/readwrite.c:297! invalid opcode: 0000 [#1] SMP Modules linked in: logfs joydev usbhid hid psmouse e1000 i2c_piix4 serio_raw [last unloaded: logfs] Pid: 20161, comm: mount Not tainted 3.1.0-rc3+ #3 innotek GmbH VirtualBox EIP: 0060:[<f809132a>] EFLAGS: 00010292 CPU: 0 EIP is at logfs_lock_write_page+0x6a/0x70 [logfs] EAX: 00000027 EBX: f73f5b20 ECX: c16007c8 EDX: 00000094 ESI: 00000000 EDI: e59be6e4 EBP: c7337b28 ESP: c7337b18 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process mount (pid: 20161, ti=c7336000 task=eb323f70 task.ti=c7336000) Stack: f8099a3d c7337b24 f73f5b20 00001002 c7337b50 f8091f6d f8099a4d f80994e4 00000003 00000000 c7337b68 00000000 c67e4400 00001000 c7337b80 f80935e5 00000000 00000000 00000000 00000000 e1fcf000 0000000f e59be618 c70bf900 Call Trace: [<f8091f6d>] logfs_get_write_page.clone.16+0xdd/0x100 [logfs] [<f80935e5>] logfs_mod_segment_entry+0x55/0x110 [logfs] [<f809460d>] logfs_get_segment_entry+0x1d/0x20 [logfs] [<f8091060>] ? logfs_cleanup_journal+0x50/0x50 [logfs] [<f809521b>] ostore_get_erase_count+0x1b/0x40 [logfs] [<f80965b8>] logfs_open_area+0xc8/0x150 [logfs] [<c141a7ec>] ? kmemleak_alloc+0x2c/0x60 [<f809668e>] __logfs_segment_write.clone.16+0x4e/0x1b0 [logfs] [<c10dd563>] ? mempool_kmalloc+0x13/0x20 [<c10dd563>] ? mempool_kmalloc+0x13/0x20 [<f809696f>] logfs_segment_write+0x17f/0x1d0 [logfs] [<f8092e8c>] logfs_write_i0+0x11c/0x180 [logfs] [<f8092f35>] logfs_write_direct+0x45/0x90 [logfs] [<f80934cd>] __logfs_write_buf+0xbd/0xf0 [logfs] [<c102900e>] ? kmap_atomic_prot+0x4e/0xe0 [<f809424b>] logfs_write_buf+0x3b/0x60 [logfs] [<f80947a9>] __logfs_write_inode+0xa9/0x110 [logfs] [<f8094cb0>] logfs_rewrite_block+0xc0/0x110 [logfs] [<f8095300>] ? get_mapping_page+0x10/0x60 [logfs] [<f8095aa0>] ? logfs_load_object_aliases+0x2e0/0x2f0 [logfs] [<f808e57d>] logfs_gc_segment+0x2ad/0x310 [logfs] [<f808e62a>] __logfs_gc_once+0x4a/0x80 [logfs] [<f808ed43>] logfs_gc_pass+0x683/0x6a0 [logfs] [<f8097a89>] logfs_mount+0x5a9/0x680 [logfs] [<c1126b21>] mount_fs+0x21/0xd0 [<c10f6f6f>] ? __alloc_percpu+0xf/0x20 [<c113da41>] ? alloc_vfsmnt+0xb1/0x130 [<c113db4b>] vfs_kern_mount+0x4b/0xa0 [<c113e06e>] do_kern_mount+0x3e/0xe0 [<c113f60d>] do_mount+0x34d/0x670 [<c10f2749>] ? strndup_user+0x49/0x70 [<c113fcab>] sys_mount+0x6b/0xa0 [<c142d87c>] syscall_call+0x7/0xb Code: f8 e8 8b 93 39 c9 8b 45 f8 3e 0f ba 28 00 19 d2 85 d2 74 ca eb d0 0f 0b 8d 45 fc 89 44 24 04 c7 04 24 3d 9a 09 f8 e8 09 92 39 c9 <0f> 0b 8d 74 26 00 55 89 e5 3e 8d 74 26 00 8b 10 80 e6 01 74 09 EIP: [<f809132a>] logfs_lock_write_page+0x6a/0x70 [logfs] SS:ESP 0068:c7337b18 ---[ end trace 96e67d5b3aa3d6ca ]--- The patch passes locked page to __logfs_write_inode. It calls function logfs_get_wblocks() to pre-lock the page. This ensures any further attempts to lock the page are ignored (esp from get_erase_count). Acked-by: Joern Engel <joern@logfs.org> Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
2012-01-28logfs: set superblock shutdown flag after generic sb shutdownPrasad Joshi1-1/+1
While unmounting the file system LogFS calls generic_shutdown_super. The function does file system independent superblock shutdown. However, it might result in call file system specific inode eviction. LogFS marks FS shutting down by setting bit LOGFS_SB_FLAG_SHUTDOWN in super->s_flags. Since, inode eviction might call truncate on inode, following BUG is observed when file system is unmounted: ------------[ cut here ]------------ kernel BUG at /home/prasad/logfs/segment.c:362! invalid opcode: 0000 [#1] PREEMPT SMP CPU 3 Modules linked in: logfs binfmt_misc ppdev virtio_blk parport_pc lp parport psmouse floppy virtio_pci serio_raw virtio_ring virtio Pid: 1933, comm: umount Not tainted 3.0.0+ #4 Bochs Bochs RIP: 0010:[<ffffffffa008c841>] [<ffffffffa008c841>] logfs_segment_write+0x211/0x230 [logfs] RSP: 0018:ffff880062d7b9e8 EFLAGS: 00010202 RAX: 000000000000000e RBX: ffff88006eca9000 RCX: 0000000000000000 RDX: ffff88006fd87c40 RSI: ffffea00014ff468 RDI: ffff88007b68e000 RBP: ffff880062d7ba48 R08: 8000000020451430 R09: 0000000000000000 R10: dead000000100100 R11: 0000000000000000 R12: ffff88006fd87c40 R13: ffffea00014ff468 R14: ffff88005ad0a460 R15: 0000000000000000 FS: 00007f25d50ea760(0000) GS:ffff88007fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000d05e48 CR3: 0000000062c72000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process umount (pid: 1933, threadinfo ffff880062d7a000, task ffff880070b44500) Stack: ffff880062d7ba38 ffff88005ad0a508 0000000000001000 0000000000000000 8000000020451430 ffffea00014ff468 ffff880062d7ba48 ffff88005ad0a460 ffff880062d7bad8 ffffea00014ff468 ffff88006fd87c40 0000000000000000 Call Trace: [<ffffffffa0088fee>] logfs_write_i0+0x12e/0x190 [logfs] [<ffffffffa0089360>] __logfs_write_rec+0x140/0x220 [logfs] [<ffffffffa0089312>] __logfs_write_rec+0xf2/0x220 [logfs] [<ffffffffa00894a4>] logfs_write_rec+0x64/0xd0 [logfs] [<ffffffffa0089616>] __logfs_write_buf+0x106/0x110 [logfs] [<ffffffffa008a19e>] logfs_write_buf+0x4e/0x80 [logfs] [<ffffffffa008a6b8>] __logfs_write_inode+0x98/0x110 [logfs] [<ffffffffa008a7c4>] logfs_truncate+0x54/0x290 [logfs] [<ffffffffa008abfc>] logfs_evict_inode+0xdc/0x190 [logfs] [<ffffffff8115eef5>] evict+0x85/0x170 [<ffffffff8115f126>] iput+0xe6/0x1b0 [<ffffffff8115b4a8>] shrink_dcache_for_umount_subtree+0x218/0x280 [<ffffffff8115ce91>] shrink_dcache_for_umount+0x51/0x90 [<ffffffff8114796c>] generic_shutdown_super+0x2c/0x100 [<ffffffffa008cc47>] logfs_kill_sb+0x57/0xf0 [logfs] [<ffffffff81147de5>] deactivate_locked_super+0x45/0x70 [<ffffffff811487ea>] deactivate_super+0x4a/0x70 [<ffffffff81163934>] mntput_no_expire+0xa4/0xf0 [<ffffffff8116469f>] sys_umount+0x6f/0x380 [<ffffffff814dd46b>] system_call_fastpath+0x16/0x1b Code: 55 c8 49 8d b6 a8 00 00 00 45 89 f9 45 89 e8 4c 89 e1 4c 89 55 b8 c7 04 24 00 00 00 00 e8 68 fc ff ff 4c 8b 55 b8 e9 3c ff ff ff <0f> 0b 0f 0b c7 45 c0 00 00 00 00 e9 44 fe ff ff 66 66 66 66 66 RIP [<ffffffffa008c841>] logfs_segment_write+0x211/0x230 [logfs] RSP <ffff880062d7b9e8> ---[ end trace fe6b040cea952290 ]--- Therefore, move super->s_flags setting after the fs-indenpendent work has been finished. Reviewed-by: Joern Engel <joern@logfs.org> Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
2012-01-28logfs: take write mutex lock during fsync and syncPrasad Joshi4-4/+8
LogFS uses super->s_write_mutex while writing data to disk. Taking the same mutex lock in sync and fsync code path solves the following BUG: ------------[ cut here ]------------ kernel BUG at /home/prasad/logfs/dev_bdev.c:134! Pid: 2387, comm: flush-253:16 Not tainted 3.0.0+ #4 Bochs Bochs RIP: 0010:[<ffffffffa007deed>] [<ffffffffa007deed>] bdev_writeseg+0x25d/0x270 [logfs] Call Trace: [<ffffffffa007c381>] logfs_open_area+0x91/0x150 [logfs] [<ffffffff8128dcb2>] ? find_level.clone.9+0x62/0x100 [<ffffffffa007c49c>] __logfs_segment_write.clone.20+0x5c/0x190 [logfs] [<ffffffff810ef005>] ? mempool_kmalloc+0x15/0x20 [<ffffffff810ef383>] ? mempool_alloc+0x53/0x130 [<ffffffffa007c7a4>] logfs_segment_write+0x1d4/0x230 [logfs] [<ffffffffa0078f8e>] logfs_write_i0+0x12e/0x190 [logfs] [<ffffffffa0079300>] __logfs_write_rec+0x140/0x220 [logfs] [<ffffffffa0079444>] logfs_write_rec+0x64/0xd0 [logfs] [<ffffffffa00795b6>] __logfs_write_buf+0x106/0x110 [logfs] [<ffffffffa007a13e>] logfs_write_buf+0x4e/0x80 [logfs] [<ffffffffa0073e33>] __logfs_writepage+0x23/0x80 [logfs] [<ffffffffa007410c>] logfs_writepage+0xdc/0x110 [logfs] [<ffffffff810f5ba7>] __writepage+0x17/0x40 [<ffffffff810f6208>] write_cache_pages+0x208/0x4f0 [<ffffffff810f5b90>] ? set_page_dirty+0x70/0x70 [<ffffffff810f653a>] generic_writepages+0x4a/0x70 [<ffffffff810f75d1>] do_writepages+0x21/0x40 [<ffffffff8116b9d1>] writeback_single_inode+0x101/0x250 [<ffffffff8116bdbd>] writeback_sb_inodes+0xed/0x1c0 [<ffffffff8116c5fb>] writeback_inodes_wb+0x7b/0x1e0 [<ffffffff8116cc23>] wb_writeback+0x4c3/0x530 [<ffffffff814d984d>] ? sub_preempt_count+0x9d/0xd0 [<ffffffff8116cd6b>] wb_do_writeback+0xdb/0x290 [<ffffffff814d984d>] ? sub_preempt_count+0x9d/0xd0 [<ffffffff814d6208>] ? _raw_spin_unlock_irqrestore+0x18/0x40 [<ffffffff8105aa5a>] ? del_timer+0x8a/0x120 [<ffffffff8116cfac>] bdi_writeback_thread+0x8c/0x2e0 [<ffffffff8116cf20>] ? wb_do_writeback+0x290/0x290 [<ffffffff8106d2e6>] kthread+0x96/0xa0 [<ffffffff814de514>] kernel_thread_helper+0x4/0x10 [<ffffffff8106d250>] ? kthread_worker_fn+0x190/0x190 [<ffffffff814de510>] ? gs_change+0xb/0xb RIP [<ffffffffa007deed>] bdev_writeseg+0x25d/0x270 [logfs] ---[ end trace 0211ad60a57657c4 ]--- Reviewed-by: Joern Engel <joern@logfs.org> Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
2012-01-28logfs: Prevent memory corruptionJoern Engel1-1/+1
This is a bad one. I wonder whether we were so far protected by no_free_segments(sb) usually being smaller than LOGFS_NO_AREAS. Found by Dan Carpenter <dan.carpenter@oracle.com> using smatch. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
2012-01-28logfs: update page reference count for pined pagesPrasad Joshi2-15/+51
LogFS sets PG_private flag to indicate a pined page. We assumed that marking a page as private is enough to ensure its existence. But instead it is necessary to hold a reference count to the page. The change resolves the following BUG BUG: Bad page state in process flush-253:16 pfn:6a6d0 page flags: 0x100000000000808(uptodate|private) Suggested-and-Acked-by: Joern Engel <joern@logfs.org> Signed-off-by: Prasad Joshi <prasadjoshi.linux@gmail.com>
2012-01-27net caif: Register properly as a pernet subsystem.Eric W. Biederman2-21/+2
caif is a subsystem and as such it needs to register with register_pernet_subsys instead of register_pernet_device. Among other problems using register_pernet_device was resulting in net_generic being called before the caif_net structure was allocated. Which has been causing net_generic to fail with either BUG_ON's or by return NULL pointers. A more ugly problem that could be caused is packets in flight why the subsystem is shutting down. To remove confusion also remove the cruft cause by inappropriately trying to fix this bug. With the aid of the previous patch I have tested this patch and confirmed that using register_pernet_subsys makes the failure go away as it should. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Tested-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-27netns: Fail conspicously if someone uses net_generic at an inappropriate time.Eric W. Biederman1-0/+1
By definition net_generic should never be called when it can return NULL. Fail conspicously with a BUG_ON to make it clear when people mess up that a NULL return should never happen. Recently there was a bug in the CAIF subsystem where it was registered with register_pernet_device instead of register_pernet_subsys. It was erroneously concluded that net_generic could validly return NULL and that net_assign_generic was buggy (when it was just inefficient). Hopefully this BUG_ON will prevent people to coming to similar erroneous conclusions in the futrue. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-28lguest: remove reference from Documentation/virtual/00-INDEXRusty Russell1-2/+0
We're in tools/lguest now. Reported-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-28virtio: correct the memory barrier in virtqueue_kick_prepare()Jason Wang1-3/+3
Use virtio_mb() to make sure the available index to be exposed before checking the the avail event. Otherwise we may get stale value of avail event in guest and never kick the host after. Note: this fixes a bug introduced by ee7cd8981e15bcb365fc762afe3fc47b8242f630. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
2012-01-28virtio: fix typos of memory barriersJason Wang1-1/+1
Note: this fixes a bug introduced recently in 7b21e34fd1c272e3a8c3846168f2f6287a4cd72b. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-27ARM: 7304/1: ioremap: fix boundary check when reusing static mappingPawel Moll1-1/+2
Since commit 576d2f2525612ecb5af029a76f21f22a3b82563d "ARM: add generic ioremap optimization by reusing static mappings" ioremap() is trying to reuse existing static mapping when possible. The condition checking boundaries of the requested and existing mappings didn't take in-page offset into consideration though, which lead to obscure and hard to debug problems when requested mapping crossed end of the static one. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-27xen/granttable: Disable grant v2 for HVM domains.Konrad Rzeszutek Wilk1-2/+5
As proper scaffolding for supporting error status is not yet implemented. BUG: unable to handle kernel NULL pointer dereference at 0000000000000400 IP: [<ffffffff81375ae9>] gnttab_end_foreign_access_ref_v2+0x29/0x40 PGD 32aa3067 PUD 32a87067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU 0 Modules linked in: sg sr_mod cdrom ata_generic ata_piix libata scsi_mod xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront cmd Pid: 2307, comm: ip Not tainted 3.3.0-rc1 #1 Xen HVM domU RIP: 0010:[<ffffffff81375ae9>] [<ffffffff81375ae9>] gnttab_end_foreign_access_ref_v2+0x29/0x40 RSP: 0018:ffff88003be03d38 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff880033210640 RCX: 0000000000000040 RDX: 0000000000002000 RSI: 0000000000000000 RDI: 0000000000000200 RBP: ffff88003be03d38 R08: 0000000000000101 R09: 0000000000000000 R10: dead000000100100 R11: 0000000000000000 R12: ffff88003be03e48 R13: 0000000000000001 R14: ffff880039461c00 R15: 0000000000000200 FS: 00007fb1f84ec700(0000) GS:ffff88003be00000(0000) knlGS:0000000000000000 ... Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-27Btrfs: fix reservations in btrfs_page_mkwriteChris Mason1-2/+8
Josef fixed btrfs_page_mkwrite to properly release reserved extents if there was an error. But if we fail to get a reservation and we fail to dirty the inode (for ENOSPC reasons), we'll end up trying to release a reservation we never had. This makes sure we only release if we were able to reserve. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-27gma500: Fix suspend/resume functionsRyan Mallon1-4/+4
Both the suspend and resume functions incorrectly set psbfb = to_psb_fb(NULL) outside of the loop over all of the framebuffers. Fix this by moving the assignment of psbfb inside the loop and removing the initialisation of fb. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-27watchdog: iTCO_wdt: add Intel Lynx Point DeviceIDsSeth Heasley1-0/+35
This patch adds the TCO Watchdog DeviceIDs for the Intel Lynx Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: via_wdt: Set min_timeout and max_timeout for wdt_devAxel Lin1-2/+2
Let the watchdog core to check the valid value range of min_timeout/max_timeout. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: Fix typo "unexpectdly"Masanari Iida2-2/+2
Correct typo "unexpectdly" to "unexpectedly" in pnx4008_wdt.c and stmp3xxx_wdt.c Signed-off-by: Masanari Iida<standby24x7@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: wafer5823wdt: Fix handling WDIOS_DISABLECARD/WDIOS_ENABLECARD optionsAxel Lin1-2/+2
While receiving WDIOS_DISABLECARD option for WDIOC_SETOPTIONS command, call wafwdt_stop() to disable watchdog. Call wafwdt_start() while receiving WDIOS_ENABLECARD option. Current code has reverse behavior. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: wm8350_wdt: Fix handling WDIOS_DISABLECARD/WDIOS_ENABLECARD optionsAxel Lin1-2/+2
While receiving WDIOS_DISABLECARD option for WDIOC_SETOPTIONS command, call wm8350_wdt_stop() to disable watchdog. Call wm8350_wdt_start() while receiving WDIOS_ENABLECARD option. Current code has reverse behavior. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: Return proper error in nuc900wdt_probe if misc_register failsAxel Lin1-1/+2
Return proper error instead of 0 if misc_register fails Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: Staticise nuc900_wdtAxel Lin1-1/+1
It is only used in this driver, so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: via_wdt: Staticise wdt_pci_tableAxel Lin1-1/+1
It is only used in this driver, so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Marc Vertes <marc.vertes@sigfox.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: omap_wdt.c: Fix the mismatch of pm_runtime enable and disableShubhrajyoti D1-0/+2
Currently the watchdog driver calls the pm_runtime_enable and never the disable. This may cause a warning when pm_runtime_enable checks for the count match. Also fixes the error /build/watchdog # insmod omap_wdt.ko [ 44.999389] omap_wdt omap_wdt: Unbalanced pm_runtime_enable! [ 45.011047] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec /build/watchdog # Attempting to fix the same by calling pm_runtime_disable. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: dw_wdt.c: use devm_request_and_ioremapJulia Lawall1-5/+1
Reimplement a call to devm_request_mem_region followed by a call to ioremap or ioremap_nocache by a call to devm_request_and_ioremap. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start ( -devm_ioremap(dev,res->start,size) +devm_request_and_ioremap(dev,res) | -devm_ioremap_nocache(dev,res->start,size) +devm_request_and_ioremap(dev,res) ) ... when any when != res->start // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: imx2_wdt.c: use devm_request_and_ioremapJulia Lawall1-10/+1
Reimplement a call to devm_request_mem_region followed by a call to ioremap or ioremap_nocache by a call to devm_request_and_ioremap. The variable res_size is then no longer needed. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start ( -devm_ioremap(dev,res->start,size) +devm_request_and_ioremap(dev,res) | -devm_ioremap_nocache(dev,res->start,size) +devm_request_and_ioremap(dev,res) ) ... when any when != res->start // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27drm/exynos: fixed pm feature for fimd module.Inki Dae1-50/+59
this patch separates fimd specific power on/off function from pm function and the pm interfaces will call that function for power on or off. and also removes unnecessary codes of resume function. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-01-26MAINTAINERS: Drop maintainer for MAX1668 hwmon driverGuenter Roeck1-7/+0
David no longer has access to MAX1688 hardware, so drop him from the maintainers list. Cc: David George <dgeorgester@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: David George <dgeorgester@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-01-26MAINTAINERS: Add hwmon entries for WolfsonMark Brown1-0/+1
The actual driver code seems to have been lost in the shuffle. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-27MAINTAINERS: added maintainer entry for Exynos DRM Driver.Inki Dae1-0/+3
I'd like to add my colleagues who dedicated to developing and improving our driver to maintainer entry. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.