| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
These are all options for boards that got removed in the past and
are not relevant here because the options no longer exist or
are implied by the platform.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
SLUB is now the only remaining allocator after the SLAB removal and it
was the default already before that, so no need to mention it in the
defconfig files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
CONFIG_NET_ETHERNET was removed a long time ago in f860b0522f65 ("drivers/net:
Kconfig and Makefile cleanup"). Remove the last references to in in ARM
defconfig files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
These were removed last year in commit 721da5cee9d4 ("driver core:
remove CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2"),
so remove the last references to them in arm config files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As part of general housekeeping, change the defconfig files to
sort lines based on the 'make savedefconfig' output, to make
it easier to do additional changes on top.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A number of options got reorganized over time wihtin Kconfig, so make sure
everything is where it belongs in order to simplify defconfig changes
again in the future.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix the size check added to dns_resolver_preparse() for the V1 server-list
header so that it doesn't give EINVAL if the size supplied is the same as
the size of the header struct (which should be valid).
This can be tested with:
echo -n -e '\0\0\01\xff\0\0' | keyctl padd dns_resolver desc @p
which will give "add_key: Invalid argument" without this fix.
Fixes: 1997b3cb4217 ("keys, dns: Fix missing size check of V1 server-list header")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/ZZ4fyY4r3rqgZL+4@xpf.sh.intel.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suppose we issue two FITRIM ioctls for ranges [0,15] and [16,31] with
mininum length of trimmed range set to 8 blocks. If we have say a range of
blocks 10-22 free, this range will not be trimmed because it straddles the
boundary of the two FITRIM ranges and neither part is big enough. This is a
bit surprising to some users that call FITRIM on smaller ranges of blocks
to limit impact on the system. Also XFS trims all free space extents that
overlap with the specified range so we are inconsistent among filesystems.
Let's change ext4_try_to_trim_range() to consider for trimming the whole
free space extent that straddles the end of specified range, not just the
part of it within the range.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231216010919.1995851-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently in case the goal length is a multiple of stripe size we use
ext4_mb_scan_aligned() to find the stripe size aligned physical blocks.
In case we are not able to find any, we again go back to calling
ext4_mb_choose_next_group() to search for a different suitable block
group. However, since the linear search always begins from the start,
most of the times we end up with the same BG and the cycle continues.
With large fliesystems, the CPU can be stuck in this loop for hours
which can slow down the whole system. Hence, until we figure out a
better way to continue the search (rather than starting from beginning)
in ext4_mb_choose_next_group(), lets just fallback to
ext4_mb_complex_scan_group() in case aligned scan fails, as it is much
more likely to find the needed blocks.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/ee033f6dfa0a7f2934437008a909c3788233950f.1702455010.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
There's nothing page-specific happening in ext4_da_do_write_end();
it's merely used for its refcount & lock, both of which are folio
properties. Saves four calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231214053035.1018876-1-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The ext4 filesystem tracks the trim status of blocks at the group
level. When an entire group has been trimmed then it is marked as
such and subsequent trim invocations with the same minimum trim size
will not be attempted on that group unless it is marked as able to be
trimmed again such as when a block is freed.
Currently the last group can't be marked as trimmed due to incorrect
logic in ext4_last_grp_cluster(). ext4_last_grp_cluster() is supposed
to return the zero based index of the last cluster in a group. This is
then used by ext4_try_to_trim_range() to determine if the trim
operation spans the entire group and as such if the trim status of the
group should be recorded.
ext4_last_grp_cluster() takes a 0 based group index, thus the valid
values for grp are 0..(ext4_get_groups_count - 1). Any group index
less than (ext4_get_groups_count - 1) is not the last group and must
have EXT4_CLUSTERS_PER_GROUP(sb) clusters. For the last group we need
to calculate the number of clusters based on the number of blocks in
the group. Finally subtract 1 from the number of clusters as zero
based indexing is expected. Rearrange the function slightly to make
it clear what we are calculating and returning.
Reproducer:
// Create file system where the last group has fewer blocks than
// blocks per group
$ mkfs.ext4 -b 4096 -g 8192 /dev/nvme0n1 8191
$ mount /dev/nvme0n1 /mnt
Before Patch:
$ fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
// Group not marked as trimmed so second invocation still discards blocks
$ fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
After Patch:
fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
// Group marked as trimmed so second invocation DOESN'T discard any blocks
fstrim -v /mnt
/mnt: 0 B (0 bytes) trimmed
Fixes: 45e4ab320c9b ("ext4: move setting of trimmed bit into ext4_try_to_trim_range()")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213051635.37731-1-surajjs@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Make erofs_err() and erofs_info() support NULL sb parameter for more
general usage.
Suggested-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Link: https://lore.kernel.org/r/20240103123202.3054718-1-guochunhai@vivo.com
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Syzbot reported a KMSAN warning,
erofs: (device loop0): z_erofs_lz4_decompress_mem: failed to decompress -12 in[46, 4050] out[917]
=====================================================
BUG: KMSAN: uninit-value in hex_dump_to_buffer+0xae9/0x10f0 lib/hexdump.c:194
..
print_hex_dump+0x13d/0x3e0 lib/hexdump.c:276
z_erofs_lz4_decompress_mem fs/erofs/decompressor.c:252 [inline]
z_erofs_lz4_decompress+0x257e/0x2a70 fs/erofs/decompressor.c:311
z_erofs_decompress_pcluster fs/erofs/zdata.c:1290 [inline]
z_erofs_decompress_queue+0x338c/0x6460 fs/erofs/zdata.c:1372
z_erofs_runqueue+0x36cd/0x3830
z_erofs_read_folio+0x435/0x810 fs/erofs/zdata.c:1843
The root cause is that the printed decompressed buffer may be filled
incompletely due to decompression failure. Since they were once only
used for debugging, get rid of them now.
Reported-and-tested-by: syzbot+6c746eea496f34b3161d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/000000000000321c24060d7cfa1c@google.com
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231227151903.2900413-1-hsiangkao@linux.alibaba.com
|
|
From 2.46 to 2.47
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix kernel-doc notation to prevent a warning:
tpm_tis_i2c_cr50.c:681: warning: Excess function parameter 'id' description in 'tpm_cr50_i2c_probe'
and fix a spelling error reported by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-integrity@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@kernel.org>
|
|
Use preferred i2c_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The STM32 systems have a mailbox used for communication with non-Linux
processors like the M4 on the STM32MP157A. Enable the driver for the
mailbox so it is available for testing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107-arm-defconfig-stm32-ipcc-v1-1-924721db5661@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The select was lost by accident during the multiplatform conversion.
Any davinci-only
arm-linux-gnueabi-ld: arch/arm/mach-davinci/sleep.o: in function `CACHE_FLUSH':
(.text+0x168): undefined reference to `arm926_flush_kern_cache_all'
Fixes: f962396ce292 ("ARM: davinci: support multiplatform build for ARM v5")
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240108110055.1531153-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
On ARM64 platforms, id->data is a 64-bit value and casting it to a
32-bit integer causes build errors. Cast it to uintptr_t instead.
The id->driver_data cast is unnecessary, so drop it.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240106-pxa-ssp-v2-1-69ac9f028bba@skole.hr
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Return statement was not needed at end of cifs_chan_update_iface
Suggested-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The return values for cifs_chan_update_iface() didn't match what the
documentation said and nothing was checking them anyway. Just make it
a void function.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
eee_active is set by phy_ethtool_get_eee() already, using the same
logic plus an additional check against link speed/duplex values.
See genphy_c45_eee_is_active() for details.
So we can remove this line.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/b086b296-0a1b-42d4-8e2b-ef6682598185@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
eee_active is set by phy_ethtool_get_eee() already, using the same
logic plus an additional check against link speed/duplex values.
See genphy_c45_eee_is_active() for details.
So we can remove this line.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/3340ff84-8d7a-404b-8268-732c7f281164@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to the previous patch, RCU locking was released too early
in bnxt_rx_flow_steer(). Fix it to unlock after reading fltr->base.sw_id
to guarantee that fltr won't be freed while we are still reading it.
Fixes: cb5bdd292dc0 ("bnxt_en: Add bnxt_lookup_ntp_filter_from_idx() function")
Reported-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/netdev/20231225165653.GH5962@kernel.org/
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240105235439.28282-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After looking up an ntuple filter from a RCU hash list, the
rcu_read_unlock() call should be made after reading the structure,
or after determining that the filter cannot age out (by aRFS).
The existing code was calling rcu_read_unlock() too early in
bnxt_srxclsrldel().
As suggested by Simon Horman, change the code to handle the error
case of fltr_base not found in the if condition. The code looks
cleaner this way.
Fixes: 8d7ba028aa9a ("bnxt_en: Add support for ntuple filter deletion by ethtool.")
Suggested-by: Simon Horman <horms@kernel.org>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20240104145955.5a6df702@kernel.org/
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240105235439.28282-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After recent refactoring, this function doesn't return error any
more. Remove the unneeded rc variable and change the function to
void. The caller is not checking for the return value.
Fixes: 96c9bedc755e ("bnxt_en: Refactor L2 filter alloc/free firmware commands.")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401041942.qrB1amZM-lkp@intel.com/
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240105235439.28282-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 0a8de364ff7a14558e9676f424283148110384d6.
Shachar reported that Vagrant (https://www.vagrantup.com/), which is
very popular tool to manage fleet of VMs stopped to work after commit
citied in Fixes line.
The issue appears while using Vagrant to manage nested VMs.
The steps are:
* create vagrant file
* vagrant up
* vagrant halt (VM is created but shut down)
* vagrant up - fail
Vagrant up stdout:
Bringing machine 'player1' up with 'libvirt' provider...
==> player1: Creating shared folders metadata...
==> player1: Starting domain.
==> player1: Domain launching with graphics connection settings...
==> player1: -- Graphics Port: 5900
==> player1: -- Graphics IP: 127.0.0.1
==> player1: -- Graphics Password: Not defined
==> player1: -- Graphics Websocket: 5700
==> player1: Waiting for domain to get an IP address...
==> player1: Waiting for machine to boot. This may take a few minutes...
player1: SSH address: 192.168.123.61:22
player1: SSH username: vagrant
player1: SSH auth method: private key
==> player1: Attempting graceful shutdown of VM...
==> player1: Attempting graceful shutdown of VM...
==> player1: Attempting graceful shutdown of VM...
player1: Guest communication could not be established! This is usually because
player1: SSH is not running, the authentication information was changed,
player1: or some other networking issue. Vagrant will force halt, if
player1: capable.
==> player1: Attempting direct shutdown of domain...
Fixes: 0a8de364ff7a ("tcp: no longer abort SYN_SENT when receiving some ICMP")
Closes: https://lore.kernel.org/all/MN2PR12MB44863139E562A59329E89DBEB982A@MN2PR12MB4486.namprd12.prod.outlook.com
Signed-off-by: Shachar Kagan <skagan@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/14459261ea9f9c7d7dfb28eb004ce8734fa83ade.1704185904.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit d8b0f5465012 ("wire up syscalls for statmount/listmount") added
two new system calls to arch/arm64/include/asm/unistd32.h but forgot to
update the __NR_compat_syscalls number, thus causing the following build
failures:
arch/arm64/include/asm/unistd32.h:922:24: error: array index in initializer exceeds array bounds
922 | #define __NR_statmount 457
| ^~~
arch/arm64/kernel/sys32.c:130:34: note: in definition of macro '__SYSCALL'
130 | #define __SYSCALL(nr, sym) [nr] = __arm64_##sym,
| ^~
Bump up the number by two to accomodate for the new system calls added.
Fixes: d8b0f5465012 ("wire up syscalls for statmount/listmount")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We return early if "iface" is NULL so there is no need to check here.
Delete those checks.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
NR_PAGE_ORDERS defines the number of page orders supported by the page
allocator, ranging from 0 to MAX_ORDER, MAX_ORDER + 1 in total.
NR_PAGE_ORDERS assists in defining arrays of page orders and allows for
more natural iteration over them.
[kirill.shutemov@linux.intel.com: fixup for kerneldoc warning]
Link: https://lkml.kernel.org/r/20240101111512.7empzyifq7kxtzk3@box
Link: https://lkml.kernel.org/r/20231228144704.14033-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I no longer have access to this mailbox. Use kernel.org to avoid
future updates.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
|
|
Even though it seems to be able to resolve some names of
case-insensitive directories, the lack of d_hash and d_compare means we
end up with a broken state in the d_cache. Considering it was never a
goal to support these two together, and we are preparing to use
d_revalidate in case-insensitive filesystems, which would make the
combination even more broken, reject any attempt to get a casefolded
inode from ecryptfs.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
|
|
__put_unaligned_be24() and friends use implicit casts to convert
larger-sized data to bytes, which trips sparse truncation warnings when
the argument is a constant:
CC [M] drivers/input/touchscreen/hynitron_cstxxx.o
CHECK drivers/input/touchscreen/hynitron_cstxxx.c
drivers/input/touchscreen/hynitron_cstxxx.c: note: in included file (through arch/x86/include/generated/asm/unaligned.h):
include/asm-generic/unaligned.h:119:16: warning: cast truncates bits from constant value (aa01a0 becomes a0)
include/asm-generic/unaligned.h:120:20: warning: cast truncates bits from constant value (aa01 becomes 1)
include/asm-generic/unaligned.h:119:16: warning: cast truncates bits from constant value (ab00d0 becomes d0)
include/asm-generic/unaligned.h:120:20: warning: cast truncates bits from constant value (ab00 becomes 0)
To avoid this let's mask off upper bits explicitly, the resulting code
should be exactly the same, but it will keep sparse happy.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202401070147.gqwVulOn-lkp@intel.com/
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Clarify the mutex lock lifetime rules a bit more.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jann Horn <jannh@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231201121808.GL3818@noisy.programming.kicks-ass.net
|
|
smb2_compound_op(SMB2_OP_GET_REPARSE) already checks if ioctl response
has a valid reparse data buffer's length, so there's no need to check
it again in parse_reparse_point().
In order to get rid of duplicate check, validate reparse data buffer's
length also in cifs_query_reparse_point().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Revert "net/mlx5: Implement management PF Ethernet profile"
This reverts commit 22c4640698a1d47606b5a4264a584e8046641784.
Revert "net/mlx5: Enable SD feature"
This reverts commit c88c49ac9c18fb7c3fa431126de1d8f8f555e912.
Revert "net/mlx5e: Block TLS device offload on combined SD netdev"
This reverts commit 83a59ce0057b7753d7fbece194b89622c663b2a6.
Revert "net/mlx5e: Support per-mdev queue counter"
This reverts commit d72baceb92539a178d2610b0e9ceb75706a75b55.
Revert "net/mlx5e: Support cross-vhca RSS"
This reverts commit c73a3ab8fa6e93a783bd563938d7cf00d62d5d34.
Revert "net/mlx5e: Let channels be SD-aware"
This reverts commit e4f9686bdee7b4dd89e0ed63cd03606e4bda4ced.
Revert "net/mlx5e: Create EN core HW resources for all secondary devices"
This reverts commit c4fb94aa822d6c9d05fc3c5aee35c7e339061dc1.
Revert "net/mlx5e: Create single netdev per SD group"
This reverts commit e2578b4f983cfcd47837bbe3bcdbf5920e50b2ad.
Revert "net/mlx5: SD, Add informative prints in kernel log"
This reverts commit c82d360325112ccc512fc11a3b68cdcdf04a1478.
Revert "net/mlx5: SD, Implement steering for primary and secondaries"
This reverts commit 605fcce33b2d1beb0139b6e5913fa0b2062116b2.
Revert "net/mlx5: SD, Implement devcom communication and primary election"
This reverts commit a45af9a96740873db9a4b5bb493ce2ad81ccb4d5.
Revert "net/mlx5: SD, Implement basic query and instantiation"
This reverts commit 63b9ce944c0e26c44c42cdd5095c2e9851c1a8ff.
Revert "net/mlx5: SD, Introduce SD lib"
This reverts commit 4a04a31f49320d078b8078e1da4b0e2faca5dfa3.
Revert "net/mlx5: Fix query of sd_group field"
This reverts commit e04984a37398b3f4f5a79c993b94c6b1224184cc.
Revert "net/mlx5e: Use the correct lag ports number when creating TISes"
This reverts commit a7e7b40c4bc115dbf2a2bb453d7bbb2e0ea99703.
There are some unanswered questions on the list, and we don't
have any docs. Given the lack of replies so far and the fact
that v6.8 merge window has started - let's revert this and
revisit for v6.9.
Link: https://lore.kernel.org/all/20231221005721.186607-1-saeed@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Revert "net: stmmac: Use interrupt mode INTM=1 for per channel irq"
This reverts commit 36af9f25ddfd311da82628f194c794786467cb12.
Revert "net: stmmac: Add support for TX/RX channel interrupt"
This reverts commit 9072e03d32088137a435ddf3aa95fd6e038d69d8.
Revert "net: stmmac: Make MSI interrupt routine generic"
This reverts commit 477bd4beb93bf9ace9bda71f1437b191befa9cf4.
Revert "dt-bindings: net: snps,dwmac: per channel irq"
This reverts commit 67d47c8ada0f8795bfcdb85cc8f2ad3ce556674b.
Device tree bindings need to be reviewed.
Link: https://lore.kernel.org/all/2df9fe3e-7971-4aa2-89a9-0e085b3b00d7@linaro.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As this function now destroys the svc_serv, this is a better name.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
sv_refcnt is no longer useful.
lockd and nfs-cb only ever have the svc active when there are a non-zero
number of threads, so sv_refcnt mirrors sv_nrthreads.
nfsd also keeps the svc active between when a socket is added and when
the first thread is started, but we don't really need a refcount for
that. We can simply not destroy the svc while there are any permanent
sockets attached.
So remove sv_refcnt and the get/put functions.
Instead of a final call to svc_put(), call svc_destroy() instead.
This is changed to also store NULL in the passed-in pointer to make it
easier to avoid use-after-free situations.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
A future patch will remove refcounting on svc_serv as it is of little
use.
It is currently used to keep the svc around while the pool_stats file is
open.
Change this to get the pointer, protected by the mutex, only in
seq_start, and the release the mutex in seq_stop.
This means that if the nfsd server is stopped and restarted while the
pool_stats file it open, then some pool stats info could be from the
first instance and some from the second. This might appear odd, but is
unlikely to be a problem in practice.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If the client interface is down, or there is a network partition between
the client and server that prevents the callback request to reach the
client, TCP on the server will keep re-transmitting the callback for about
~9 minutes before giving up and closing the connection.
If the connection between the client and the server is re-established
before the connection is closed and after the callback timed out (9 secs)
then the re-transmitted callback request will arrive at the client. When
the server receives the reply of the callback, receive_cb_reply prints the
"Got unrecognized reply..." message in the system log since the callback
request was already removed from the server xprt's recv_queue.
Even though this scenario has no effect on the server operation, a
malfunctioning or malicious client can fill up the server's system log.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Having an nfsd thread waiting for an RDMA Read completion is
problematic if the Read responder (ie, the client) stops responding.
We need to go back to handling RDMA Reads by getting the svc scheduler
to call svc_rdma_recvfrom() a second time to finish building an RPC
message after a Read completion.
This is the final patch, and makes several changes that have to
happen concurrently:
1. svc_rdma_process_read_list no longer waits for a completion, but
simply builds and posts the Read WRs.
2. svc_rdma_read_done() now queues a completed Read on
sc_read_complete_q for later processing rather than calling
complete().
3. The completed RPC message is no longer built in the
svc_rdma_process_read_list() path. Finishing the message is now
done in svc_rdma_recvfrom() when it notices work on the
sc_read_complete_q. The "finish building this RPC message" code
is removed from the svc_rdma_process_read_list() path.
This arrangement avoids the need for an nfsd thread to wait for an
RDMA Read non-interruptibly without a timeout. It's basically the
same code structure that Tom Tucker used for Read chunks along with
some clean-up and modernization.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Once a set of RDMA Reads are complete, the Read completion handler
will poke the transport to trigger a second call to
svc_rdma_recvfrom(). recvfrom() will then merge the RDMA Read
payloads with the previously received RPC header to form a completed
RPC Call message.
The new code is copied from the svc_rdma_process_read_list() path.
A subsequent patch will make use of this code and remove the code
that this was copied from (svc_rdma_rw.c).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Having an nfsd thread waiting for an RDMA Read completion is
problematic if the Read responder (ie, the client) stops responding.
We need to go back to handling RDMA Reads by allowing the nfsd
thread to return to the svc scheduler, then waking a second thread
finish the RPC message once the Read completion fires.
As a next step, add a list_head upon which completed Reads are queued.
A subsequent patch will make use of this queue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Having an nfsd thread waiting for an RDMA Read completion is
problematic if the Read responder (the client) stops responding. We
need to go back to handling RDMA Reads by allowing the nfsd thread
to return to the svc scheduler, then waking a second thread finish
the RPC message once the Read completion fires.
To start with, restore the rc_pages field so that RDMA Read pages
can be managed across calls to svc_rdma_recvfrom().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The comment that starts "Qualify ..." applies to only some of the
following code paragraph. Re-arrange the lines so the comment makes
more sense.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
These won't have much diagnostic value for site administrators.
Since they can't be disabled, they become noise.
What's more, the subsequent rdma_create_qp() call adjusts the Send
Queue size (possibly downward) without warning, making the size
reported by these pr_warns inaccurate.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There are a couple of dprintk() call sites in svc_rdma_accept()
that show pointer addresses. These days, displayed pointer addresses
are hashed and thus have little or no diagnostic value, especially
for site administrators.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The atomic_inc_return() in svc_rdma_send_cid_init() is expensive.
Some svc_rdma_chunk_ctxt's now reside in long-lived container
structures. They don't need a fresh completion ID for every I/O
operation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
Arnd Bergmann
David Howells
Ye Bin
Ojaswin Mujoo
Matthew Wilcox (Oracle)
Suraj Jitindar Singh
Chunhai Guo
Gao Xiang
Steve French
Randy Dunlap
Rob Herring
Mark Brown
Duje Mihanović
Dan Carpenter
Heiner Kallweit
Michael Chan
Shachar Kagan
Florian Fainelli
Kirill A. Shutemov
Gabriel Krisman Bertazi
Dmitry Torokhov
Ingo Molnar
Paulo Alcantara
Jakub Kicinski
NeilBrown
Dai Ngo
Chuck Lever