| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull ktest updates from Steven Rostedt:
- Have config-bisect save the good/bad configs at each step.
- Show log file location even on success
- Add PRE_TEST_DIE to kill test if the PRE_TEST fails
- Add a NOT operator for conditionals in config file
- Add the log output of the last test when emailing on failure.
- Other minor clean ups and small fixes.
* tag 'ktest-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Fix spelling mistake "Cant" -> "Can't"
ktest.pl: Change the logic to control the size of the log file emailed
ktest.pl: Add MAIL_MAX_SIZE to limit the amount of log emailed
ktest.pl: Add the log of last test in email on failure
ktest.pl: Turn off buffering to the log file
ktest.pl: Just open up the log file once
ktest.pl: Add a NOT operator
ktest.pl: Define PRE_TEST_DIE to kill the test if the PRE_TEST fails
ktest.pl: Always show log file location if defined even on success
ktest.pl: Have config-bisect save each config used in the bisect
|
|
There is a spelling mistake in an error message. Fix it.
Link: https://lkml.kernel.org/r/20200810100750.61475-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If the log file for a given test is larger than the max size given then use
set the seek from the end of the log file instead of from the start of the
test.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200726120752.16768-1-grandmaster@al2klimov.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add the ktest config option MAIL_MAX_SIZE that will limit the size of the
log file that is placed into the email on failure.
Link: https://lore.kernel.org/r/20200701231756.790637968@goodmis.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If a failure happens and an email is sent, show the contents of the log of
the last test that failed in the email.
Link: http://lore.kernel.org/r/20200701231756.619246244@goodmis.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The log file should be up to date to whatever is happening in ktest.
Disable buffering to the LOG output file handle.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Currently, every write to the log file is done by opening the file, writing
to it, then closing the file. This rather expensive. Just open it at the
beginning and close it at the end.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
There is a NOT DEFINED operator, but there is not an operator that can
negate any other expression.
For example: NOT (${FOO} == boot || ${BAR} == run)
Add the keyword NOT to allow the ktest.pl config files to negate operators.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Currently, if a PRE_TEST is defined and ran, but fails, there's nothing
currently available to make the test fail too. Add a PRE_TEST_DIE option that
when set, if a PRE_TEST is defined and fails, the test will die too.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If a log file is defined and the test were to error, a print statement is
made that shows the user where the log file is to examine it further. But
this is not done if the test were to succeed.
I find it annoying that it does not show where the log file is on success,
as I run several different tests that place their log files in various
locations, and even though the test pass, there's things I want to look at
in the log file (like warnings). It is much easier to find where the log
file is, if it is displayed at the end of a test.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
When performing a automatic config bisect via ktest.pl, it is very useful to
have a copy of each of the bisects used. This way, if a bisect were to go
wrong, it is possible to retrace the steps and continue at the location
before the error was made.
The ktest.pl will make a copy of the good and bad configs, labeled as such,
as well as a number attached to it that represents the iteration of the
bisect. These files are saved in the ktest temp directory where it currently
stores the good and bad config files.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This patch fixes multipe spelling typo found in ktest.pl.
Link: http://lkml.kernel.org/r/20200309115430.57540-1-standby24x7@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Before rebooting the box, a "ssh sync" is called to the test machine to see
if it is alive or not. But if the test machine is in a partial state, that
ssh may never actually finish, and the ktest test hangs.
Add a 10 second timeout to the sync test, which will fail after 10 seconds
and then cause the test to reboot the test machine.
Cc: stable@vger.kernel.org
Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
For the last time, I screwed up my ktest config file, and the build went
into the default "randconfig", blowing away the .config that I had set up.
The reason for the default randconfig was because when this was first
written, I wanted to do a bunch of randconfigs. But as time progressed,
ktest isn't about randconfig anymore, and because randconfig destroys the
config in the build directory, it's a dangerous default to have. Use
oldconfig as the default.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This patch fixes some spelling typo in sample.conf
Link: http://lkml.kernel.org/r/20190930124925.20250-1-standby24x7@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This patch fixes some spelling typos in config-bisect.pl
Link: http://lkml.kernel.org/r/20190723032445.14220-1-standby24x7@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Based on 1 normalized pattern(s):
licensed under the terms of the gnu gpl license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 62 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.929121379@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update sample.conf for grub2bls
Link: http://lkml.kernel.org/r/20190509213647.6276-7-msys.mizuma@gmail.com
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Remove get_grub2_index() because it isn't used anywhere.
Link: http://lkml.kernel.org/r/20190509213647.6276-6-msys.mizuma@gmail.com
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
For BLS, kernel entry is added by kernel-install command through
POST_INSALL, for example,
POST_INSTALL = ssh root@Test "/usr/bin/kernel-install \
add $KERNEL_VERSION /boot/vmlinuz-$KERNEL_VERSION"
The entry is removed by kernel-install command and the kernel
version is needed for the argument.
Pass KERNEL_VERSION variable to POST_KTEST so that kernel-install
command can remove the entry like as follows:
POST_KTEST = ssh root@Test "/usr/bin/kernel-install remove $KERNEL_VERSION"
Link: http://lkml.kernel.org/r/20190509213647.6276-5-msys.mizuma@gmail.com
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Fedora 30 introduces Boot Loader Specification (BLS),
it changes around grub entry configuration.
kernel entries aren't in grub.cfg. We can get the entries
by "grubby --info=ALL" command.
Introduce grub2bls as REBOOT_TYPE option for BLS.
Link: http://lkml.kernel.org/r/20190509213647.6276-4-msys.mizuma@gmail.com
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Cleanup get_grub_index().
Link: http://lkml.kernel.org/r/20190509213647.6276-3-msys.mizuma@gmail.com
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Introduce _get_grub_index() to deal with Boot Loader
Specification (BLS) and cleanup.
Link: http://lkml.kernel.org/r/20190509213647.6276-2-msys.mizuma@gmail.com
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Unexpected power cycle occurs while the installation of the
kernel.
ssh root@Test sync ... [0 seconds] SUCCESS
ssh root@Test reboot ... [1 second] FAILED!
virsh destroy Test; sleep 5; virsh start Test ... [6 seconds] SUCCESS
That is because REBOOT, the default is "ssh $SSH_USER@$MACHINE
reboot", exits as 255 even if the reboot is successfully done,
like as:
]# ssh root@Test reboot
Connection to Test closed by remote host.
]# echo $?
255
]#
To avoid the unexpected power cycle, introduce a new parameter,
REBOOT_RETURN_CODE to judge whether REBOOT is successfully done
or not.
Link: http://lkml.kernel.org/r/20190418135943.12640-1-msys.mizuma@gmail.com
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
ktest fails if meta characters are in GRUB_MENU, for example
GRUB_MENU = 'Fedora (test)'
The failure happens because the meta characters are not escaped,
so the menu doesn't match in any entries in GRUB_FILE.
Use quotemeta() to escape the meta characters.
Link: http://lkml.kernel.org/r/20190417235823.18176-1-msys.mizuma@gmail.com
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If a test has an error, display not only the what type of test failed, but
if the test was giving a name, display that too, as well as the current
iteration of the tests. Each test has an iteration number associated to it.
For error messages display that iteration number along with the test type
and test name. This includes the message that gets sent via email.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Pull ktest updates from Steven Rostedt:
"These commits have either been sitting in my INBOX or have been in my
local tree for some time. I need to push them upstream:
- Separate out config-bisect.pl from ktest.pl.
This allows users to do config bisects without full ktest setup.
- Email on status change.
Allow the user to be emailed on test start, finish, failure, etc.
- Other small fixes and enhancements"
* tag 'ktest-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (24 commits)
ktest: Take submenu into account for grub2 menus
ktest.pl: Add MAIL_COMMAND option to define how to send email
ktest.pl: Use run_command to execute sending mail
ktest.pl: Allow dodie be recursive
ktest.pl: Kill test if mailer is not supported
ktest.pl: Add MAIL_PATH option to define where to find the mailer
ktest.pl: No need to print no mailer is specified when mailto is not
Ktest: add email options to sample.config
Ktest: Use dodie for critical falures
Ktest: Add SigInt handling
Ktest: Add email support
ktest.pl: Detect if a config-bisect was interrupted
ktest.pl: Make finding config-bisect.pl dynamic
ktest.pl: Have ktest.pl pass -r to config-bisect.pl to reset bisect
ktest.pl: Use diffconfig if available for failed config bisects
ktest.pl: Allow for the config-bisect.pl output to display to console
ktest: Use config-bisect.pl in ktest.pl
ktest: Add standalone config-bisect.pl program
ktest: Set do_not_reboot=y for CONFIG_BISECT_TYPE=build
ktest: Set buildonly=1 for CONFIG_BISECT_TYPE=build
...
|
|
grub-reboot selects the submenu's first menuentry (title is "1>0") rather than ktest's
menuentry (title is "2") by mistake.
===
$ sudo cat /boot/grub/grub.cfg | grep -E "^menuentry|^submenu"
...
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option '...' {
...
submenu 'Advanced options for Ubuntu' $menuentry_id_option '...' {
...
menuentry 'ktest' {
...
===
Correct it by taking submenu entries into account in get_grub2_index().
Link: http://lkml.kernel.org/r/87poaje4as.wl-satoru.takeuchi@gmail.com
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Allow the user to override the default way to send email. This will allow
the user to add their own mailer and format for sending email.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Instead of open coding system() call, use run_command which will log the
sending of email as well.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If dodie cause a function that itself will call dodie, then be able to
handle that. This will allow dodie functions to call run_command, which
could possibly call dodie. If dodie is called again, simply ignore it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If the user specifies a MAILTO, but the MAILER is not supported, then
kill the test.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The option MAIL_PATH lets the user decide how to find the mailer they are
using. For example, sendmail is usually located in /usr/sbin but is not
always in the path of non admin users. Have ktest look through the user's
PATH environment variable (adding /usr/sbin) as well, but if that's not good
enough, allow the user to define where to find the mailer.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
squash to mail exec
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If the user doesn't want to send mail, then don't bother them with output
that says they didn't specify a mailer. That can be annoying.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
A block of email options is added under the optional config section.
Link: http://lkml.kernel.org/r/1522094884-22718-5-git-send-email-tianyang.chen@oracle.com
Suggested-by: Dhaval Giani <dhaval.giani@oracle.com>
Signed-off-by: Tim Tianyang Chen <tianyang.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Users should get emails when the script dies because of a critical failure.
Critical failures are defined as any errors that could abnormally terminate
the script.
In order to add email support, this patch converts all die() to dodie() except:
* when '-v' is used as an option to get the version of the script.
* in Sig-Int handeler because it's not a fatal error to cancel the script.
* errors happen during parsing config
Link: http://lkml.kernel.org/r/1522094884-22718-4-git-send-email-tianyang.chen@oracle.com
Suggested-by: Dhaval Giani <dhaval.giani@oracle.com>
Signed-off-by: Tim Tianyang Chen <tianyang.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
User can cancel tests and specify handler's behavior using option
'EMAIL_WHEN_CANCELED'.
Link: http://lkml.kernel.org/r/1522094884-22718-3-git-send-email-tianyang.chen@oracle.com
Suggested-by: Dhaval Giani <dhaval.giani@oracle.com>
Signed-off-by: Tim Tianyang Chen <tianyang.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Users can define optional variables to get email notifications.
Ktest can send emails when the script:
* was started
* failed with fatal errors and called dodie()
* completed all testing
Users have to setup the mailer provided in config prior to using this script.
Supported mailers: mailx, mail, sendmail
mailer specific routines are _sendmail_send(), _mailx_send()
Link: http://lkml.kernel.org/r/1522094884-22718-2-git-send-email-tianyang.chen@oracle.com
Suggested-by: Dhaval Giani <dhaval.giani@oracle.com>
Signed-off-by: Tim Tianyang Chen <tianyang.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If a config-bisect was interrupted, then allow the user to continue, or
restart a new config-bisect.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Just looking for config-bisect.pl in the source tree can be risky,
especially, if the source tree being tested doesn't have config-bisect.pl in
place. Instead, allow the user to set where to find config-bisect.pl with a
new option CONFIG_BISECT_EXEC.
If this option is not set, by default, ktest.pl will look for
config-bisect.pl in the following locations:
`pwd`/config-bisect.pl # where ktest.pl was called from
`dirname /path/to/ktest.pl`/config-bisect.pl # where ktest.pl exists
${BUILD_DIR}/tools/testing/ktest/config-bisect.pl
# where config-bisect.pl exists in the source tree.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If config-bisect.pl sees that a config_bisect has already been started, it
will ask on the command line if it should bisect or not. This will mess up
running config_bisect from ktest.pl.
Have ktest.pl pass in '-r' to config-bisect.pl and have config-bisect.pl
recognize that to reset without asking.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Check to see if diffconfig is available and use that to diff the configs
instead of using 'diff -u', as diffconfig produces much better output of
kernel config files. It checks the source directory for the executable.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
When commands are run in ktest, they are only displayed in the ktest log
file, but that is not sufficient for outputting the display for config
bisects. The result of a config bisect is not shown.
Add a way to display the output of "run_command" which is the subroutine
used by ktest to execute commands. Use this feature to display the output of
config-bisect.pl executions to see the progress as well as the result.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Reduce code duplication and take advantage of bisection logic
improvements by calling config-bisect.pl.
The output of make oldconfig is now copied directly to the desired file,
rather than doing assign_configs+save_config, in order to preserve the
ordering so that diffing the configs at the end will provide useful
output.
Link: http://lkml.kernel.org/r/20170717001630.10518-8-swood@redhat.com
Signed-off-by: Scott Wood <swood@redhat.com>
[ Modified to use with new version of config-bisect.pl ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Started working on a stand alone program that can do a config bisect. It is
based on the config bisect code of ktest.pl. Instead of needing all the
infrastructure of ktest.pl, all that is required for config-bisect.pl is two
config files. One that works, and one that does not. The goal is to pass in
the two files, and it will create a new "good" and a new "bad" config file
based on input from the user. After several iterations (calls to this
program), it will eventually end with a minimum config value that allows one
config to work and the other config to break.
The program uses a technique that takes the good config and then makes half
of the configs that differ from the bad config just like the bad config.
The code will use make oldconfig to make sure the configs that are set are
not all converted back due to incorrect dependencies on other configs set in
the bad config but not in the new test config.
This is still a work in progress, but as it was written while I was working
at Red Hat, I want this code to be submitted as such.
Signed-off-by: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
|
|
A number of architectures are being removed from the kernel, so
we no longer need to test them.
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Currently setting do_not_reboot is triggered by simple builds and bisect
builds, but not config bisect builds.
Link: http://lkml.kernel.org/r/20170717001630.10518-3-swood@redhat.com
Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Rather than adding a third copy of the same logic, rework it to cover
all three buildonly cases at once.
In the future, please consider using the same variable to perform the
same function regardless of context...
Link: http://lkml.kernel.org/r/20170717001630.10518-2-swood@redhat.com
Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
ktest.pl will read any file as long as its name is specified as the first
argument on the command line. Comment this fact in sample.conf.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
Linus Torvalds
Colin Ian King
Steven Rostedt (VMware)
Alexander A. Klimov
Masanari Iida
Thomas Gleixner
Masayoshi Mizuma
Satoru Takeuchi
Tim Tianyang Chen
Scott Wood
Arnd Bergmann