| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add two tests for PTR_TO_BTF_ID vs. null ptr comparison,
one for PTR_TO_BTF_ID in the ctx structure and the
other for PTR_TO_BTF_ID after one level pointer chasing.
In both cases, the test ensures condition is not
removed.
For example, for this test
struct bpf_fentry_test_t {
struct bpf_fentry_test_t *a;
};
int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
{
if (arg == 0)
test7_result = 1;
return 0;
}
Before the previous verifier change, we have xlated codes:
int test7(long long unsigned int * ctx):
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
0: (79) r1 = *(u64 *)(r1 +0)
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
1: (b4) w0 = 0
2: (95) exit
After the previous verifier change, we have:
int test7(long long unsigned int * ctx):
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
0: (79) r1 = *(u64 *)(r1 +0)
; if (arg == 0)
1: (55) if r1 != 0x0 goto pc+4
; test7_result = 1;
2: (18) r1 = map[id:6][0]+48
4: (b7) r2 = 1
5: (7b) *(u64 *)(r1 +0) = r2
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
6: (b4) w0 = 0
7: (95) exit
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630171241.2523875-1-yhs@fb.com
|
|
Calling bpf_prog_detach is incorrect, since it takes target_fd as
its argument. The intention here is to pass it as attach_bpf_fd,
so use bpf_prog_detach2 and pass zero for target_fd.
Fixes: 06716e04a043 ("selftests/bpf: Extend test_flow_dissector to cover link creation")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-7-lmb@cloudflare.com
|
|
Pass 0 as target_fd when attaching and detaching flow dissector.
Additionally, pass the expected program when detaching.
Fixes: 1f043f87bb59 ("selftests/bpf: Add tests for attaching bpf_link to netns")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-6-lmb@cloudflare.com
|
|
This case, while not particularly useful, is worth covering because we
expect the operation to succeed as opposed when re-attaching the same
program directly with PROG_ATTACH.
While at it, update the tests summary that fell out of sync when tests
extended to cover links.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200625141357.910330-5-jakub@cloudflare.com
|
|
We are relying on the fact, that we can pass > sizeof(int) optvals
to the SOL_IP+IP_FREEBIND option (the kernel will take first 4 bytes).
In the BPF program we check that we can only touch PAGE_SIZE bytes,
but the real optlen is PAGE_SIZE * 2. In both cases, we override it to
some predefined value and trim the optlen.
Also, let's modify exiting IP_TOS usecase to test optlen=0 case
where BPF program just bypasses the data as is.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200617010416.93086-2-sdf@google.com
|
|
Remove invalid assumption in libbpf that .bss map doesn't have to be updated
in kernel. With addition of skeleton and memory-mapped initialization image,
.bss doesn't have to be all zeroes when BPF map is created, because user-code
might have initialized those variables from user-space.
Fixes: eba9c5f498a1 ("libbpf: Refactor global data map initialization")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200612194504.557844-1-andriin@fb.com
|
|
When cgroup_skb/egress triggers the MAC header is not set. Added a
test that asserts reading MAC header is a -EFAULT but NET header
succeeds. The test result from within the eBPF program is stored in
an 1-element array map that the userspace then reads and asserts on.
Another assertion is added that reading from a large offset, past
the end of packet, returns -EFAULT.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/9028ccbea4385a620e69c0a104f469ffd655c01e.1591812755.git.zhuyifei@google.com
|
|
Sync tools uapi bpf.h header file and update selftests that use
struct bpf_devmap_val.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/159170951195.2102545.1833108712124273987.stgit@firesoul
|
|
When using BPF_PROG_ATTACH to attach a program to a cgroup in
BPF_F_ALLOW_MULTI mode, it is not possible to replace a program
with itself. This is because the check for duplicate programs
doesn't take the replacement program into account.
Replacing a program with itself might seem weird, but it has
some uses: first, it allows resetting the associated cgroup storage.
Second, it makes the API consistent with the non-ALLOW_MULTI usage,
where it is possible to replace a program with itself. Third, it
aligns BPF_PROG_ATTACH with bpf_link, where replacing itself is
also supported.
Sice this code has been refactored a few times this change will
only apply to v5.7 and later. Adjustments could be made to
commit 1020c1f24a94 ("bpf: Simplify __cgroup_bpf_attach") and
commit d7bf2c10af05 ("bpf: allocate cgroup storage entries on attaching bpf programs")
as well as commit 324bda9e6c5a ("bpf: multi program support for cgroup+bpf")
Fixes: af6eea57437a ("bpf: Implement bpf_link-based cgroup BPF program attachment")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200608162202.94002-1-lmb@cloudflare.com
|
|
Fix test race, in which background poll can get either 5 or 6 samples,
depending on timing of notification. Prevent this by open-coding sample
triggering and forcing notification for the very last sample only.
Also switch to using atomic increments and exchanges for more obviously
reliable counting and checking. Additionally, check expected processed sample
counters for single-threaded use cases as well.
Fixes: 9a5f25ad30e5 ("selftests/bpf: Fix sample_cnt shared between two threads")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200608003615.3549991-1-andriin@fb.com
|
|
Make sample_cnt volatile to fix possible selftests failure due to compiler
optimization preventing latest sample_cnt value to be visible to main thread.
sample_cnt is incremented in background thread, which is then joined into main
thread. So in terms of visibility sample_cnt update is ok. But because it's
not volatile, compiler might make optimizations that would prevent main thread
to see latest updated value. Fix this by marking global variable volatile.
Fixes: cb1c9ddd5525 ("selftests/bpf: Add BPF ringbuf selftests")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200602050349.215037-1-andriin@fb.com
|
|
Extend the existing flow_dissector test case to run tests once using direct
prog attachments, and then for the second time using indirect attachment
via link.
The intention is to exercises the newly added high-level API for attaching
programs to network namespace with links (bpf_program__attach_netns).
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-13-jakub@cloudflare.com
|
|
Switch flow dissector test setup from custom BPF object loader to BPF
skeleton to save boilerplate and prepare for testing higher-level API for
attaching flow dissector with bpf_link.
To avoid depending on program order in the BPF object when populating the
flow dissector PROG_ARRAY map, change the program section names to contain
the program index into the map. This follows the example set by tailcall
tests.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-12-jakub@cloudflare.com
|
|
test_flow_dissector leaves a TAP device after it's finished, potentially
interfering with other tests that will run after it. Fix it by closing the
TAP descriptor on cleanup.
Fixes: 0905beec9f52 ("selftests/bpf: run flow dissector tests in skb-less mode")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-11-jakub@cloudflare.com
|
|
Extend the existing test case for flow dissector attaching to cover:
- link creation,
- link updates,
- link info querying,
- mixing links with direct prog attachment.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-10-jakub@cloudflare.com
|
|
Add tests to verify ability to add an XDP program to a
entry in a DEVMAP.
Add negative tests to show DEVMAP programs can not be
attached to devices as a normal XDP program, and accesses
to egress_ifindex require BPF_XDP_DEVMAP attach type.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200529220716.75383-6-dsahern@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Both singleton BPF ringbuf and BPF ringbuf with map-in-map use cases are tested.
Also reserve+submit/discards and output variants of API are validated.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-4-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Lets test using probe* in SCHED_CLS network programs as well just
to be sure these keep working. Its cheap to add the extra test
and provides a second context to test outside of sk_msg after
we generalized probe* helpers to all networking types.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159033911685.12355.15951980509828906214.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The test itself is not particularly useful but it encodes a common
pattern we have.
Namely do a sk storage lookup then depending on data here decide if
we need to do more work or alternatively allow packet to PASS. Then
if we need to do more work consult task_struct for more information
about the running task. Finally based on this additional information
drop or pass the data. In this case the suspicious check is not so
realisitic but it encodes the general pattern and uses the helpers
so we test the workflow.
This is a load test to ensure verifier correctly handles this case.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159033909665.12355.6166415847337547879.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The MSCC bug fix in 'net' had to be slightly adjusted because the
register accesses are done slightly differently in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As discussed in [0], it's dangerous to allow mapping BPF map, that's meant to
be frozen and is read-only on BPF program side, because that allows user-space
to actually store a writable view to the page even after it is frozen. This is
exacerbated by BPF verifier making a strong assumption that contents of such
frozen map will remain unchanged. To prevent this, disallow mapping
BPF_F_RDONLY_PROG mmap()'able BPF maps as writable, ever.
[0] https://lore.kernel.org/bpf/CAEf4BzYGWYhXdp6BJ7_=9OQPJxQpgug080MMjdSB72i9R+5c6g@mail.gmail.com/
Fixes: fc9702273e2e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/bpf/20200519053824.1089415-1-andriin@fb.com
|
|
Extend the existing connect_force_port test to assert get{peer,sock}name programs
as well. The workflow for e.g. IPv4 is as follows: i) server binds to concrete
port, ii) client calls getsockname() on server fd which exposes 1.2.3.4:60000 to
client, iii) client connects to service address 1.2.3.4:60000 binds to concrete
local address (127.0.0.1:22222) and remaps service address to a concrete backend
address (127.0.0.1:60123), iv) client then calls getsockname() on its own fd to
verify local address (127.0.0.1:22222) and getpeername() on its own fd which then
publishes service address (1.2.3.4:60000) instead of actual backend. Same workflow
is done for IPv6 just with different address/port tuples.
# ./test_progs -t connect_force_port
#14 connect_force_port:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/3343da6ad08df81af715a95d61a84fb4a960f2bf.1589841594.git.daniel@iogearbox.net
|
|
There is a much higher chance we can see the regressions if the
test is part of test_progs.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200515194904.229296-2-sdf@google.com
|
|
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend BPF selftest xdp_adjust_tail with grow tail tests, which is added
as subtest's. The first grow test stays in same form as original shrink
test. The second grow test use the newer bpf_prog_test_run_xattr() calls,
and does extra checking of data contents.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158945350567.97035.9632611946765811876.stgit@firesoul
|
|
Current selftest for BPF-helper xdp_adjust_tail only shrink tail.
Make it more clear that this is a shrink test case.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158945350058.97035.17280775016196207372.stgit@firesoul
|
|
Test bpf_sk_lookup_tcp, bpf_sk_release, bpf_sk_cgroup_id and
bpf_sk_ancestor_cgroup_id helpers from cgroup skb program.
The test creates a testing cgroup, starts a TCPv6 server inside the
cgroup and creates two client sockets: one inside testing cgroup and one
outside.
Then it attaches cgroup skb program to the cgroup that checks all TCP
segments coming to the server and allows only those coming from the
cgroup of the server. If a segment comes from a peer outside of the
cgroup, it'll be dropped.
Finally the test checks that client from inside testing cgroup can
successfully connect to the server, but client outside the cgroup fails
to connect by timeout.
The main goal of the test is to check newly introduced
bpf_sk_{,ancestor_}cgroup_id helpers.
It also checks a couple of socket lookup helpers (tcp & release), but
lookup helpers were introduced much earlier and covered by other tests.
Here it's mostly checked that they can be called from cgroup skb.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/171f4c5d75e8ff4fe1c4e8c1c12288b5240a4549.1589486450.git.rdna@fb.com
|
|
mmap() subsystem allows user-space application to memory-map region with
initial page offset. This wasn't taken into account in initial implementation
of BPF array memory-mapping. This would result in wrong pages, not taking into
account requested page shift, being memory-mmaped into user-space. This patch
fixes this gap and adds a test for such scenario.
Fixes: fc9702273e2e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512235925.3817805-1-andriin@fb.com
|
|
Add fmod_ret BPF program to existing test_overhead selftest. Also re-implement
user-space benchmarking part into benchmark runner to compare results. Results
with ./bench are consistently somewhat lower than test_overhead's, but relative
performance of various types of BPF programs stay consisten (e.g., kretprobe is
noticeably slower). This slowdown seems to be coming from the fact that
test_overhead is single-threaded, while benchmark always spins off at least
one thread for producer. This has been confirmed by hacking multi-threaded
test_overhead variant and also single-threaded bench variant. Resutls are
below. run_bench_rename.sh script from benchs/ subdirectory was used to
produce results for ./bench.
Single-threaded implementations
===============================
/* bench: single-threaded, atomics */
base : 4.622 ± 0.049M/s
kprobe : 3.673 ± 0.052M/s
kretprobe : 2.625 ± 0.052M/s
rawtp : 4.369 ± 0.089M/s
fentry : 4.201 ± 0.558M/s
fexit : 4.309 ± 0.148M/s
fmodret : 4.314 ± 0.203M/s
/* selftest: single-threaded, no atomics */
task_rename base 4555K events per sec
task_rename kprobe 3643K events per sec
task_rename kretprobe 2506K events per sec
task_rename raw_tp 4303K events per sec
task_rename fentry 4307K events per sec
task_rename fexit 4010K events per sec
task_rename fmod_ret 3984K events per sec
Multi-threaded implementations
==============================
/* bench: multi-threaded w/ atomics */
base : 3.910 ± 0.023M/s
kprobe : 3.048 ± 0.037M/s
kretprobe : 2.300 ± 0.015M/s
rawtp : 3.687 ± 0.034M/s
fentry : 3.740 ± 0.087M/s
fexit : 3.510 ± 0.009M/s
fmodret : 3.485 ± 0.050M/s
/* selftest: multi-threaded w/ atomics */
task_rename base 3872K events per sec
task_rename kprobe 3068K events per sec
task_rename kretprobe 2350K events per sec
task_rename raw_tp 3731K events per sec
task_rename fentry 3639K events per sec
task_rename fexit 3558K events per sec
task_rename fmod_ret 3511K events per sec
/* selftest: multi-threaded, no atomics */
task_rename base 3945K events per sec
task_rename kprobe 3298K events per sec
task_rename kretprobe 2451K events per sec
task_rename raw_tp 3718K events per sec
task_rename fentry 3782K events per sec
task_rename fexit 3543K events per sec
task_rename fmod_ret 3526K events per sec
Note that the fact that ./bench benchmark always uses atomic increments for
counting, while test_overhead doesn't, doesn't influence test results all that
much.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-4-andriin@fb.com
|
|
The added test includes the following subtests:
- test verifier change for btf_id_or_null
- test load/create_iter/read for
ipv6_route/netlink/bpf_map/task/task_file
- test anon bpf iterator
- test anon bpf iterator reading one char at a time
- test file bpf iterator
- test overflow (single bpf program output not overflow)
- test overflow (single bpf program output overflows)
- test bpf prog returning 1
The ipv6_route tests the following verifier change
- access fields in the variable length array of the structure.
The netlink load tests the following verifier change
- put a btf_id ptr value in a stack and accessible to
tracing/iter programs.
The anon bpf iterator also tests link auto attach through skeleton.
$ test_progs -n 2
#2/1 btf_id_or_null:OK
#2/2 ipv6_route:OK
#2/3 netlink:OK
#2/4 bpf_map:OK
#2/5 task:OK
#2/6 task_file:OK
#2/7 anon:OK
#2/8 anon-read-one-char:OK
#2/9 file:OK
#2/10 overflow:OK
#2/11 overflow-e2big:OK
#2/12 prog-ret-1:OK
#2 bpf_iter:OK
Summary: 1/12 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175923.2477637-1-yhs@fb.com
|
|
We want to have a tighter control on what ports we bind to in
the BPF_CGROUP_INET{4,6}_CONNECT hooks even if it means
connect() becomes slightly more expensive. The expensive part
comes from the fact that we now need to call inet_csk_get_port()
that verifies that the port is not used and allocates an entry
in the hash table for it.
Since we can't rely on "snum || !bind_address_no_port" to prevent
us from calling POST_BIND hook anymore, let's add another bind flag
to indicate that the call site is BPF program.
v5:
* fix wrong AF_INET (should be AF_INET6) in the bpf program for v6
v3:
* More bpf_bind documentation refinements (Martin KaFai Lau)
* Add UDP tests as well (Martin KaFai Lau)
* Don't start the thread, just do socket+bind+listen (Martin KaFai Lau)
v2:
* Update documentation (Andrey Ignatov)
* Pass BIND_FORCE_ADDRESS_NO_PORT conditionally (Andrey Ignatov)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200508174611.228805-5-sdf@google.com
|
|
1. Move pkt_v4 and pkt_v6 into network_helpers and adjust the users.
2. Copy-paste spin_lock_thread into two tests that use it.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20200508174611.228805-3-sdf@google.com
|
|
Move the following routines that let us start a background listener
thread and connect to a server by fd to the test_prog:
* start_server - socket+bind+listen
* connect_to_fd - connect to the server identified by fd
These will be used in the next commit.
Also, extend these helpers to support AF_INET6 and accept the family
as an argument.
v5:
* drop pthread.h (Martin KaFai Lau)
* add SO_SNDTIMEO (Martin KaFai Lau)
v4:
* export extra helper to start server without a thread (Martin KaFai Lau)
* tcp_rtt is no longer starting background thread (Martin KaFai Lau)
v2:
* put helpers into network_helpers.c (Andrii Nakryiko)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200508174611.228805-2-sdf@google.com
|
|
Add test for BPF_ENABLE_STATS, which should enable run_time_ns stats.
~/selftests/bpf# ./test_progs -t enable_stats -v
test_enable_stats:PASS:skel_open_and_load 0 nsec
test_enable_stats:PASS:get_stats_fd 0 nsec
test_enable_stats:PASS:attach_raw_tp 0 nsec
test_enable_stats:PASS:get_prog_info 0 nsec
test_enable_stats:PASS:check_stats_enabled 0 nsec
test_enable_stats:PASS:check_run_cnt_valid 0 nsec
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200430071506.1408910-4-songliubraving@fb.com
|
|
Update bpf_sk_assign test to fetch the server socket from SOCKMAP, now that
map lookup from BPF in SOCKMAP is enabled. This way the test TC BPF program
doesn't need to know what address server socket is bound to.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429181154.479310-4-jakub@cloudflare.com
|
|
If condition is inverted, but it's also just not necessary.
Fixes: 1c1052e0140a ("tools/testing/selftests/bpf: Add self-tests for new helper bpf_get_ns_current_pid_tgid.")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Carlos Neira <cneirabustos@gmail.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-11-andriin@fb.com
|
|
AddressSanitizer assumes that all memory dereferences are done against memory
allocated by sanitizer's malloc()/free() code and not touched by anyone else.
Seems like this doesn't hold for perf buffer memory. Disable instrumentation
on perf buffer callback function.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-10-andriin@fb.com
|
|
Another one found by AddressSanitizer. input_len is bigger than actually
initialized data size.
Fixes: c7566a69695c ("selftests/bpf: Add field existence CO-RE relocs tests")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-8-andriin@fb.com
|
|
Fold stand-alone test_hashmap test into test_progs.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-4-andriin@fb.com
|
|
As discussed at LPC 2019 ([0]), this patch brings (a quite belated) support
for declarative BTF-defined map-in-map support in libbpf. It allows to define
ARRAY_OF_MAPS and HASH_OF_MAPS BPF maps without any user-space initialization
code involved.
Additionally, it allows to initialize outer map's slots with references to
respective inner maps at load time, also completely declaratively.
Despite a weak type system of C, the way BTF-defined map-in-map definition
works, it's actually quite hard to accidentally initialize outer map with
incompatible inner maps. This being C, of course, it's still possible, but
even that would be caught at load time and error returned with helpful debug
log pointing exactly to the slot that failed to be initialized.
As an example, here's a rather advanced HASH_OF_MAPS declaration and
initialization example, filling slots #0 and #4 with two inner maps:
#include <bpf/bpf_helpers.h>
struct inner_map {
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(max_entries, 1);
__type(key, int);
__type(value, int);
} inner_map1 SEC(".maps"),
inner_map2 SEC(".maps");
struct outer_hash {
__uint(type, BPF_MAP_TYPE_HASH_OF_MAPS);
__uint(max_entries, 5);
__uint(key_size, sizeof(int));
__array(values, struct inner_map);
} outer_hash SEC(".maps") = {
.values = {
[0] = &inner_map2,
[4] = &inner_map1,
},
};
Here's the relevant part of libbpf debug log showing pretty clearly of what's
going on with map-in-map initialization:
libbpf: .maps relo #0: for 6 value 0 rel.r_offset 96 name 260 ('inner_map1')
libbpf: .maps relo #0: map 'outer_arr' slot [0] points to map 'inner_map1'
libbpf: .maps relo #1: for 7 value 32 rel.r_offset 112 name 249 ('inner_map2')
libbpf: .maps relo #1: map 'outer_arr' slot [2] points to map 'inner_map2'
libbpf: .maps relo #2: for 7 value 32 rel.r_offset 144 name 249 ('inner_map2')
libbpf: .maps relo #2: map 'outer_hash' slot [0] points to map 'inner_map2'
libbpf: .maps relo #3: for 6 value 0 rel.r_offset 176 name 260 ('inner_map1')
libbpf: .maps relo #3: map 'outer_hash' slot [4] points to map 'inner_map1'
libbpf: map 'inner_map1': created successfully, fd=4
libbpf: map 'inner_map2': created successfully, fd=5
libbpf: map 'outer_hash': created successfully, fd=7
libbpf: map 'outer_hash': slot [0] set to map 'inner_map2' fd=5
libbpf: map 'outer_hash': slot [4] set to map 'inner_map1' fd=4
Notice from the log above that fd=6 (not logged explicitly) is used for inner
"prototype" map, necessary for creation of outer map. It is destroyed
immediately after outer map is created.
See also included selftest with some extra comments explaining extra details
of usage. Additionally, similar initialization syntax and libbpf functionality
can be used to do initialization of BPF_PROG_ARRAY with references to BPF
sub-programs. This can be done in follow up patches, if there will be a demand
for this.
[0] https://linuxplumbersconf.org/event/4/contributions/448/
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200429002739.48006-4-andriin@fb.com
|
|
Extend bpf_obj_id selftest to verify bpf_link's observability APIs.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-7-andriin@fb.com
|
|
cls_redirect is a TC clsact based replacement for the glb-redirect iptables
module available at [1]. It enables what GitHub calls "second chance"
flows [2], similarly proposed by the Beamer paper [3]. In contrast to
glb-redirect, it also supports migrating UDP flows as long as connected
sockets are used. cls_redirect is in production at Cloudflare, as part of
our own L4 load balancer.
We have modified the encapsulation format slightly from glb-redirect:
glbgue_chained_routing.private_data_type has been repurposed to form a
version field and several flags. Both have been arranged in a way that
a private_data_type value of zero matches the current glb-redirect
behaviour. This means that cls_redirect will understand packets in
glb-redirect format, but not vice versa.
The test suite only covers basic features. For example, cls_redirect will
correctly forward path MTU discovery packets, but this is not exercised.
It is also possible to switch the encapsulation format to GRE on the last
hop, which is also not tested.
There are two major distinctions from glb-redirect: first, cls_redirect
relies on receiving encapsulated packets directly from a router. This is
because we don't have access to the neighbour tables from BPF, yet. See
forward_to_next_hop for details. Second, cls_redirect performs decapsulation
instead of using separate ipip and sit tunnel devices. This
avoids issues with the sit tunnel [4] and makes deploying the classifier
easier: decapsulated packets appear on the same interface, so existing
firewall rules continue to work as expected.
The code base started it's life on v4.19, so there are most likely still
hold overs from old workarounds. In no particular order:
- The function buf_off is required to defeat a clang optimization
that leads to the verifier rejecting the program due to pointer
arithmetic in the wrong order.
- The function pkt_parse_ipv6 is force inlined, because it would
otherwise be rejected due to returning a pointer to stack memory.
- The functions fill_tuple and classify_tcp contain kludges, because
we've run out of function arguments.
- The logic in general is rather nested, due to verifier restrictions.
I think this is either because the verifier loses track of constants
on the stack, or because it can't track enum like variables.
1: https://github.com/github/glb-director/tree/master/src/glb-redirect
2: https://github.com/github/glb-director/blob/master/docs/development/second-chance-design.md
3: https://www.usenix.org/conference/nsdi18/presentation/olteanu
4: https://github.com/github/glb-director/issues/64
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200424185556.7358-2-lmb@cloudflare.com
|
|
This adds a new selftest that tests the ability to attach an freplace
program to a program type that relies on the expected_attach_type of the
target program to pass verification.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158773526831.293902.16011743438619684815.stgit@toke.dk
|
|
David Ahern noticed that there was a bug in the EXPECTED_FD code so
programs did not get detached properly when that parameter was supplied.
This case was not included in the xdp_attach tests; so let's add it to be
sure that such a bug does not sneak back in down.
Fixes: 87854a0b57b3 ("selftests/bpf: Add tests for attaching XDP programs")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200414145025.182163-2-toke@redhat.com
|
|
For some types of BPF programs that utilize expected_attach_type, libbpf won't
set load_attr.expected_attach_type, even if expected_attach_type is known from
section definition. This was done to preserve backwards compatibility with old
kernels that didn't recognize expected_attach_type attribute yet (which was
added in 5e43f899b03a ("bpf: Check attach type at prog load time"). But this
is problematic for some BPF programs that utilize newer features that require
kernel to know specific expected_attach_type (e.g., extended set of return
codes for cgroup_skb/egress programs).
This patch makes libbpf specify expected_attach_type by default, but also
detect support for this field in kernel and not set it during program load.
This allows to have a good metadata for bpf_program
(e.g., bpf_program__get_extected_attach_type()), but still work with old
kernels (for cases where it can work at all).
Additionally, due to expected_attach_type being always set for recognized
program types, bpf_program__attach_cgroup doesn't have to do extra checks to
determine correct attach type, so remove that additional logic.
Also adjust section_names selftest to account for this change.
More detailed discussion can be found in [0].
[0] https://lore.kernel.org/bpf/20200412003604.GA15986@rdna-mbp.dhcp.thefacebook.com/
Fixes: 5cf1e9145630 ("bpf: cgroup inet skb programs can return 0 to 3")
Fixes: 5e43f899b03a ("bpf: Check attach type at prog load time")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20200414182645.1368174-1-andriin@fb.com
|
|
Test that frozen and mmap()'ed BPF map can't be mprotect()'ed as writable or
executable memory. Also validate that "downgrading" from writable to read-only
doesn't screw up internal writable count accounting for the purposes of map
freezing.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200410202613.3679837-2-andriin@fb.com
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2020-04-10
The following pull-request contains BPF updates for your *net* tree.
We've added 13 non-merge commits during the last 7 day(s) which contain
a total of 13 files changed, 137 insertions(+), 43 deletions(-).
The main changes are:
1) JIT code emission fixes for riscv and arm32, from Luke Nelson and Xi Wang.
2) Disable vmlinux BTF info if GCC_PLUGIN_RANDSTRUCT is used, from Slava Bacherikov.
3) Fix oob write in AF_XDP when meta data is used, from Li RongQing.
4) Fix bpf_get_link_xdp_id() handling on single prog when flags are specified,
from Andrey Ignatov.
5) Fix sk_assign() BPF helper for request sockets that can have sk_reuseport
field uninitialized, from Joe Stringer.
6) Fix mprotect() test case for the BPF LSM, from KP Singh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add xdp_info selftest that makes sure that bpf_get_link_xdp_id returns
valid prog_id for different input modes:
* w/ and w/o flags when no program is attached;
* w/ and w/o flags when one program is attached.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/2a9a6d1ce33b91ccc1aa3de6dba2d309f2062811.1586236080.git.rdna@fb.com
|
|
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
|
|
The test was previously using an mprotect on the heap memory allocated
using malloc and was expecting the allocation to be always using
sbrk(2). This is, however, not always true and in certain conditions
malloc may end up using anonymous mmaps for heap alloctions. This means
that the following condition that is used in the "lsm/file_mprotect"
program is not sufficent to detect all mprotect calls done on heap
memory:
is_heap = (vma->vm_start >= vma->vm_mm->start_brk &&
vma->vm_end <= vma->vm_mm->brk);
The test is updated to use an mprotect on memory allocated on the stack.
While this would result in the splitting of the vma, this happens only
after the security_file_mprotect hook. So, the condition used in the BPF
program holds true.
Fixes: 03e54f100d57 ("bpf: lsm: Add selftests for BPF_PROG_TYPE_LSM")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200402200751.26372-1-kpsingh@chromium.org
|
Yonghong Song
Lorenz Bauer
Jakub Sitnicki
Stanislav Fomichev
Andrii Nakryiko
YiFei Zhu
Jesper Dangaard Brouer
David Ahern
John Fastabend
David S. Miller
Daniel Borkmann
Andrey Ignatov
Song Liu
Toke Høiland-Jørgensen
Linus Torvalds
KP Singh