| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
|
|
Add test cases that verify that each registered packet trap policer:
* Honors that imposed limitations of rate and burst size
* Able to police trapped packets to the specified rate
* Able to police trapped packets to the specified burst size
* Able to be unbound from its trap group
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add test cases for packet trap policer set / show commands as well as
for the binding of these policers to packet trap groups.
Both good and bad flows are tested for maximum coverage.
v2:
* Add test case with new 'fail_trap_policer_set' knob
* Add test case for partially modified trap group
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'pm_nl_ctl' was adding a trailing whitespace after having printed the
IP. But at the end, the IP element is currently always the last one.
The bash script launching 'pm_nl_ctl' had trailing whitespaces in the
expected result on purpose. But these whitespaces have been removed when
the patch has been applied upstream. To avoid trailing whitespaces in
the bash code, 'pm_nl_ctl' and expected results have now been adapted.
The MPTCP PM selftest can now pass again.
Fixes: eedbc685321b (selftests: add PM netlink functional tests)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the pm netlink to configure the creation of several
subflows, and verify that via MIB counters.
Update the mptcp_connect program to allow reliable MP_JOIN
handshake even on small data file
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This introduces basic self-tests for the PM netlink,
checking the basic APIs and possible exceptional
values.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For historical reasons, there are several timestamping selftest targets
in selftests/networking/timestamping. Move them to the standard
directory for networking tests: selftests/net.
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the test checks the observable effect of skbedit priority:
queueing of packets at the correct qdisc band. It therefore misses the fact
that the counters for offloaded rules are not updated. Add an extra check
for the counter.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a test that runs packets with dsfield set, and test that pedit adjusts
the DSCP or ECN parts or the whole field.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The lib files should not be defined as TEST_PROGS, or we will run them
in run_kselftest.sh.
Also remove ethtool_lib.sh exec permission.
Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Find some tests are missed in Makefile by running:
for file in $(ls *.sh); do grep -q $file Makefile || echo $file; done
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add missing Makefile for net/forwarding tests and include it to
the targets list, otherwise forwarding tests are not installed
in case of cross-compilation.
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Many systems build/test up-to-date kernels with older libcs, and
an older glibc (2.17) lacks the definition of SOL_DCCP in
/usr/include/bits/socket.h (it was added in the 4.6 timeframe).
Adding the definition to the test program avoids a compilation
failure that gets in the way of building tools/testing/selftests/net.
The test itself will work once the definition is added; either
skipping due to DCCP not being configured in the kernel under test
or passing, so there are no other more up-to-date glibc dependencies
here it seems beyond that missing definition.
Fixes: 11fb60d1089f ("selftests: net: reuseport_addr_any: add DCCP")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a test that runs traffic through a port such that skbedit priority
action acts on it during forwarding. Test that at egress, it is classified
correctly according to the new priority at a PRIO qdisc.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add tests for mlxsw hw_stats types.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Minor overlapping changes, nothing serious.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit adds a test to check if we can fully utilize 4-tuples for
connect() when all ephemeral ports are exhausted.
The test program changes the local port range to use only one port and binds
two sockets with or without SO_REUSEADDR and SO_REUSEPORT, and with the same
EUID or with different EUIDs, then do listen().
We should be able to bind only one socket having both SO_REUSEADDR and
SO_REUSEPORT per EUID, which restriction is to prevent unintentional
listen().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
allows to run the tests with fixed receive buffer by passing
"-R <value>" to mptcp_connect.sh.
While at it, add a default 10 second poll timeout so the "-t"
becomes optional -- this makes mptcp_connect simpler to use
during manual testing.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the SW-datapath ETS selftests use "ip link" stats to obtain the
number of packets that went through a given band. mlxsw then uses ethtool
per-priority counters.
Instead, change both to use qdiscs. In SW datapath this is the obvious
choice, and now that mlxsw offloads FIFO, this should work on the offloaded
datapath as well. This has the effect of verifying that the FIFO offload
works.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A function busywait() was recently added based on the logic in
__tc_check_packets(). Convert the code in tc_common to use the new
function.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
until_counter_is() currently takes as an argument a number and the
condition holds when the current counter value is >= that number. Make the
function more generic by taking a partial expression instead of just the
number.
Convert the two existing users.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function tc_rule_stats_get() fetches a given statistic of a TC rule
given the rule preference. Another common way to reference a rule is using
its handle. Introduce a dual to the aforementioned function that gets a
statistic given rule handle.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch update {ipv4, ipv6}_addr_metric_test with
1. Set metric of address with peer route and see if the route added
correctly.
2. Modify metric and peer address for peer route and see if the route
changed correctly.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mptcp conflict was overlapping additions.
The SMC conflict was an additional and removal happening at the same
time.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add two devlink port helpers:
* devlink port get by netdev
* devlink cpu port get
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sanity check for devlink info command.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vxlan test uses offload indication checks.
Use a busywait helper and wait until the offload indication is set or
fail if it reaches timeout.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Blackhole routes test uses offload indication checks.
Use busywait helper and wait until the routes offload indication is set or
fail if it reaches timeout.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This tests that below the queue minimum length, there is no dropping /
marking, and above max, everything is dropped / marked.
The test is structured as a core file with topology and test code, and
three wrappers: one for RED used as a root Qdisc, and two for
testing (W)RED under PRIO and ETS.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extract a helper __start_traffic() configurable by protocol type. Allow
passing through extra mausezahn arguments. Add a wrapper,
start_tcp_traffic().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull Kselftest fixes from Shuah Khan:
- fixes to TIMEOUT failures and out-of-tree compilation compilation
errors from Michael Ellerman.
- declutter git status fix from Christophe Leroy
* tag 'linux-kselftest-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/rseq: Fix out-of-tree compilation
selftests: Install settings files to fix TIMEOUT failures
selftest/lkdtm: Don't pollute 'git status'
|
|
Currently the helpers assume pref 1 and handle 101. Make that explicit
and pass the values from callers.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from
Cong Wang.
2) Fix deadlock in xsk by publishing global consumer pointers when NAPI
is finished, from Magnus Karlsson.
3) Set table field properly to RT_TABLE_COMPAT when necessary, from
Jethro Beekman.
4) NLA_STRING attributes are not necessary NULL terminated, deal wiht
that in IFLA_ALT_IFNAME. From Eric Dumazet.
5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov.
6) Handle mtu==0 devices properly in wireguard, from Jason A.
Donenfeld.
7) Fix several lockdep warnings in bonding, from Taehee Yoo.
8) Fix cls_flower port blocking, from Jason Baron.
9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen.
10) Fix RDMA race in qede driver, from Michal Kalderon.
11) Fix several false lockdep warnings by adding conditions to
list_for_each_entry_rcu(), from Madhuparna Bhowmik.
12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen.
13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song.
14) Hey, variables declared in switch statement before any case
statements are not initialized. I learn something every day. Get
rids of this stuff in several parts of the networking, from Kees
Cook.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
bnxt_en: Improve device shutdown method.
net: netlink: cap max groups which will be considered in netlink_bind()
net: thunderx: workaround BGX TX Underflow issue
ionic: fix fw_status read
net: disable BRIDGE_NETFILTER by default
net: macb: Properly handle phylink on at91rm9200
s390/qeth: fix off-by-one in RX copybreak check
s390/qeth: don't warn for napi with 0 budget
s390/qeth: vnicc Fix EOPNOTSUPP precedence
openvswitch: Distribute switch variables for initialization
net: ip6_gre: Distribute switch variables for initialization
net: core: Distribute switch variables for initialization
udp: rehash on disconnect
net/tls: Fix to avoid gettig invalid tls record
bpf: Fix a potential deadlock with bpf_map_do_batch
bpf: Do not grab the bucket spinlock by default on htab batch ops
ice: Wait for VF to be reset/ready before configuration
ice: Don't tell the OS that link is going down
ice: Don't reject odd values of usecs set by user
...
|
|
Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") added a 45 second timeout for tests, and also added
a way for tests to customise the timeout via a settings file.
For example the ftrace tests take multiple minutes to run, so they
were given longer in commit b43e78f65b1d ("tracing/selftests: Turn off
timeout setting").
This works when the tests are run from the source tree. However if the
tests are installed with "make -C tools/testing/selftests install",
the settings files are not copied into the install directory. When the
tests are then run from the install directory the longer timeouts are
not applied and the tests timeout incorrectly.
So add the settings files to TEST_FILES of the appropriate Makefiles
to cause the settings files to be installed using the existing install
logic.
Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid
that. 0x14 and 0x18 would be better and works as well.
Reported-by: Petr Machata <petrm@mellanox.com>
Fixes: 4e867c9a50ff ("selftests: forwarding: vxlan_bridge_1d: fix tos value")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 71130f29979c ("vxlan: fix tos value before xmit") we start
strict vxlan xmit tos value by RT_TOS(), which limits the tos value less
than 0x1E. With current value 0x40 the test will failed with "v1: Expected
to capture 10 packets, got 0". So let's choose a smaller tos value for
testing.
Fixes: d417ecf533fe ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 27596472473a ("ipv6: fix ECMP route replacement") it is no
longer possible to replace an ECMP-able route by a non ECMP-able route.
For example,
ip route add 2001:db8::1/128 via fe80::1 dev dummy0
ip route replace 2001:db8::1/128 dev dummy0
does not work as expected.
Tweak the replacement logic so that point 3 in the log of the above commit
becomes:
3. If the new route is not ECMP-able, and no matching non-ECMP-able route
exists, replace matching ECMP-able route (if any) or add the new route.
We can now summarize the entire replace semantics to:
When doing a replace, prefer replacing a matching route of the same
"ECMP-able-ness" as the replace argument. If there is no such candidate,
fallback to the first route found.
Fixes: 27596472473a ("ipv6: fix ECMP route replacement")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For tc ip_proto filter, when we extract the flow via __skb_flow_dissect()
without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to
the inner proto.
So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP
proto.
For test mirror_gre.sh, it may make user confused if we capture ICMP
message on $h3(since the flow is GRE message). So I move the capture
dev to h3-gt{4,6}, and only capture ICMP message.
Before the fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
After fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
Fixes: ba8d39871a10 ("selftests: forwarding: Add test for mirror to gretap")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <pmachata@gmail.com>
Tested-by: Petr Machata <pmachata@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While building selftests, the following errors were observed:
> tools/testing/selftests/timens'
> gcc -Wall -Werror -pthread -lrt -ldl timens.c -o tools/testing/selftests/timens/timens
> /usr/bin/ld: /tmp/ccGy5CST.o: in function `check_config_posix_timers':
> timens.c:(.text+0x65a): undefined reference to `timer_create'
> collect2: error: ld returned 1 exit status
Quoting commit 870f193d48c2 ("selftests: net: use LDLIBS instead of
LDFLAGS"):
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
While at here, correct other selftests, not only timens ones.
Reported-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Turns out that when we accept a new subflow, the newly created
inet_sk(tcp_sk)->pinet6 points at the ipv6_pinfo structure of the
listener socket.
This wasn't caught by the selftest because it closes the accepted fd
before the listening one.
adding a close(listenfd) after accept returns is enough:
BUG: KASAN: use-after-free in inet6_getname+0x6ba/0x790
Read of size 1 at addr ffff88810e310866 by task mptcp_connect/2518
Call Trace:
inet6_getname+0x6ba/0x790
__sys_getpeername+0x10b/0x250
__x64_sys_getpeername+0x6f/0xb0
also alter test program to exercise this.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit adds a test for FIN_ACK process races related reconnection
latency spike issues. The issue has described and solved by the
previous commit ("tcp: Reduce SYN resend delay if a suspicous ACK is
received").
The test program is configured with a server and a client process. The
server creates and binds a socket to a port that dynamically allocated,
listen on it, and start a infinite loop. Inside the loop, it accepts
connection, reads 4 bytes from the socket, and closes the connection.
The client is constructed as an infinite loop. Inside the loop, it
creates a socket with LINGER and NODELAY option, connect to the server,
send 4 bytes data, try read some data from server. After the read()
returns, it measure the latency from the beginning of this loop to this
point and if the latency is larger than 1 second (spike), print a
message.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test that runs traffic across a port throttled with TBF. The test
checks that the observed throughput is within +-5% from the installed
shaper.
To allow checking both the software datapath and the offloaded one, make
the test suitable for inclusion from driver-specific wrapper. Introduce
such wrappers for mlxsw.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function tc_rule_stats_get() fetches a packet counter of a given TC
rule. Extend it to support byte counters as well by adding an optional
argument with selector.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function busywait() is handy as a safety-latched variant of a while
loop. Many selftests deal specifically with counter values, and busywaiting
on them is likely to be rather common (it is not quite common now, but
busywait() has not been around for very long). To facilitate expressing
simply what is tested, introduce two helpers:
- until_counter_is(), which can be used as a predicate passed to
busywait(), which holds when expression, which is itself passed as an
argument to until_counter_is(), reaches a desired value.
- busywait_for_counter(), which is useful for waiting until a given counter
changes "by" (as opposed to "to") a certain amount.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function humanize() is used for converting value in bits/s to a
human-friendly approximate value in Kbps, Mbps or Gbps. There is nothing
hardware-specific in that, so move the function to lib.sh.
Similarly for the rate() function, which just does a bit of math to
calculate a rate, given two counter values and a time interval.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add mptcp_connect tool:
xmit two files back and forth between two processes, several net
namespaces including some adding delays, losses and reordering.
Wrapper script tests that data was transmitted without corruption.
The "-c" command line option for mptcp_connect.sh is there for debugging:
The script will use tcpdump to create one .pcap file per test case, named
according to the namespaces, protocols, and connect address in use.
For example, the first test case writes the capture to
ns1-ns1-MPTCP-MPTCP-10.0.1.1.pcap.
The stderr output from tcpdump is printed after the test completes to
show tcpdump's "packets dropped by kernel" information.
Also check that userspace can't create MPTCP sockets when mptcp.enabled
sysctl is off.
The "-b" option allows to tune/lower send buffer size.
"-m mmap" can be used to test blocking io. Default is non-blocking
io using read/write/poll.
Will run automatically on "make kselftest".
Note that the default timeout of 45 seconds is used even if there is a
"settings" changing it to 450. 45 seconds should be enough in most cases
but this depends on the machine running the tests.
A fix to correctly read the "settings" file has been proposed upstream
but not applied yet. It is not blocking the execution of these new tests
but it would be nice to have it:
https://patchwork.kernel.org/patch/11204935/
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement a set of common helpers and tests for FIB offload that can be
used by multiple drivers to check their FIB offload implementations.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ungrafting from PRIO bug fixes in net, when merged into net-next,
merge cleanly but create a build failure. The resolution used here is
from Petr Machata.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Linus Torvalds
Ido Schimmel
Matthieu Baerts
Paolo Abeni
Jian Yang
Petr Machata
David S. Miller
Hangbin Liu
Masahiro Yamada
Vadym Kochan
Alan Maguire
Jiri Pirko
Kuniyuki Iwashima
Florian Westphal
Shalom Toledo
Danielle Ratson
Michael Ellerman
Benjamin Poirier
Dmitry Safonov
SeongJae Park