| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The txtimestamp selftest sets a fixed 500us tolerance. This value was
arrived at experimentally. Some platforms have higher variances. Make
this adjustable by adding the following flag:
-t N: tolerance (usec) for timestamp validation.
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix RCU locaking in iwlwifi, from Johannes Berg.
2) mt76 can access uninitialized NAPI struct, from Felix Fietkau.
3) Fix race in updating pause settings in bnxt_en, from Vasundhara
Volam.
4) Propagate error return properly during unbind failures in ax88172a,
from George Kennedy.
5) Fix memleak in adf7242_probe, from Liu Jian.
6) smc_drv_probe() can leak, from Wang Hai.
7) Don't muck with the carrier state if register_netdevice() fails in
the bonding driver, from Taehee Yoo.
8) Fix memleak in dpaa_eth_probe, from Liu Jian.
9) Need to check skb_put_padto() return value in hsr_fill_tag(), from
Murali Karicheri.
10) Don't lose ionic RSS hash settings across FW update, from Shannon
Nelson.
11) Fix clobbered SKB control block in act_ct, from Wen Xu.
12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang.
13) IS_UDPLITE cleanup a long time ago, incorrectly handled
transformations involving UDPLITE_RECV_CC. From Miaohe Lin.
14) Unbalanced locking in netdevsim, from Taehee Yoo.
15) Suppress false-positive error messages in qed driver, from Alexander
Lobakin.
16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye.
17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost.
18) Uninitialized value in geneve_changelink(), from Cong Wang.
19) Fix deadlock in xen-netfront, from Andera Righi.
19) flush_backlog() frees skbs with IRQs disabled, so should use
dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov
Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
drivers/net/wan: lapb: Corrected the usage of skb_cow
dev: Defer free of skbs in flush_backlog
qrtr: orphan socket in qrtr_release()
xen-netfront: fix potential deadlock in xennet_remove()
flow_offload: Move rhashtable inclusion to the source file
geneve: fix an uninitialized value in geneve_changelink()
bonding: check return value of register_netdevice() in bond_newlink()
tcp: allow at most one TLP probe per flight
AX.25: Prevent integer overflows in connect and sendmsg
cxgb4: add missing release on skb in uld_send()
net: atlantic: fix PTP on AQC10X
AX.25: Prevent out-of-bounds read in ax25_sendmsg()
sctp: shrink stream outq when fails to do addstream reconf
sctp: shrink stream outq only when new outcnt < old outcnt
AX.25: Fix out-of-bounds read in ax25_connect()
enetc: Remove the mdio bus on PF probe bailout
net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload
net: ethernet: ave: Fix error returns in ave_init
drivers/net/wan/x25_asy: Fix to make it work
ipvs: fix the connection sync failed in some cases
...
|
|
Randy reported compile failure when CONFIG_SYSCTL is not set/enabled:
ERROR: modpost: "sysctl_vals" [drivers/net/vrf.ko] undefined!
Fix by splitting out the sysctl init and cleanup into helpers that
can be set to do nothing when CONFIG_SYSCTL is disabled. In addition,
move vrf_strict_mode and vrf_strict_mode_change to above
vrf_shared_table_handler (code move only) and wrap all of it
in the ifdef CONFIG_SYSCTL.
Update the strict mode tests to check for the existence of the
/proc/sys entry.
Fixes: 33306f1aaf82 ("vrf: add sysctl parameter for strict mode")
Cc: Andrea Mayer <andrea.mayer@uniroma2.it>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-21
The following pull-request contains BPF updates for your *net-next* tree.
We've added 46 non-merge commits during the last 6 day(s) which contain
a total of 68 files changed, 4929 insertions(+), 526 deletions(-).
The main changes are:
1) Run BPF program on socket lookup, from Jakub.
2) Introduce cpumap, from Lorenzo.
3) s390 JIT fixes, from Ilya.
4) teach riscv JIT to emit compressed insns, from Luke.
5) use build time computed BTF ids in bpf iter, from Yonghong.
====================
Purely independent overlapping changes in both filter.h and xdp.h
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to 'man 8 ip-netns', if `ip netns identify` returns an empty string,
there's no net namespace associated with current PID: fix the net ns entrance
logic.
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Existing BTF_ID_LIST used a local static variable
to store btf_ids. This patch provided a new macro
BTF_ID_LIST_GLOBAL to store btf_ids in a global
variable which can be shared among multiple files.
The existing BTF_ID_LIST is still retained.
Two reasons. First, BTF_ID_LIST is also used to build
btf_ids for helper arguments which typically
is an array of 5. Since typically different
helpers have different signature, it makes
little sense to share them. Second, some
current computed btf_ids are indeed local.
If later those btf_ids are shared between
different files, they can use BTF_ID_LIST_GLOBAL then.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20200720163401.1393159-1-yhs@fb.com
|
|
Sync kernel header btf_ids.h to tools directory.
Also define macro CONFIG_DEBUG_INFO_BTF before
including btf_ids.h in prog_tests/resolve_btfids.c
since non-stub definitions for BTF_ID_LIST etc. macros
are defined under CONFIG_DEBUG_INFO_BTF. This
prevented test_progs from failing.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200720163359.1393079-1-yhs@fb.com
|
|
A handful of samples and selftests fail to build on s390, because
after commit 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}()
only to archs where they work") bpf_probe_read is not available
anymore.
Fix by using bpf_probe_read_kernel.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200720114806.88823-1-iii@linux.ibm.com
|
|
OpenBSD netcat (Debian patchlevel 1.195-2) does not seem to react to
SIGINT for whatever reason, causing prefix.pl to hang after
test_lwt_seg6local.sh exits due to netcat inheriting
test_lwt_seg6local.sh's file descriptors.
Fix by using SIGTERM instead.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200720101810.84299-1-iii@linux.ibm.com
|
|
When running out of srctree, relative path to lib/test_bpf.ko is
different than when running in srctree. Check $building_out_of_srctree
environment variable and use a different relative path if needed.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200717165326.6786-2-iii@linux.ibm.com
|
|
Add tdc to existing kselftest infrastructure so that it can be run with
existing kselftests. TDC now generates objects in objdir/kselftest
without cluttering main objdir, leaves source directory clean, and
installs correctly in kselftest_install, properly adding itself to
run_kselftest.sh script.
Add tc-testing as a target of selftests/Makefile. Create tdc.sh to run
tdc.py targets with correct arguments. To support single target from
selftest/Makefile, combine tc-testing/bpf/Makefile and
tc-testing/Makefile. Move action.c up a directory to tc-testing/.
Tested with:
make O=/tmp/{objdir} TARGETS="tc-testing" kselftest
cd /tmp/{objdir}
cd kselftest
cd tc-testing
./tdc.sh
make -C tools/testing/selftests/ TARGETS=tc-testing run_tests
make TARGETS="tc-testing" kselftest
cd tools/testing/selftests
./kselftest_install.sh /tmp/exampledir
My VM doesn't run all the kselftests so I commented out all except my
target and net/pmtu.sh then:
cd /tmp/exampledir && ./run_kselftest.sh
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Briana Oursler <briana.oursler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the example program for PTP ancillary functionality with the
ability to configure not only the periodic output's period (frequency),
but also the phase and duty cycle (pulse width) which were newly
introduced.
The ioctl level also needs to be updated to the new PTP_PEROUT_REQUEST2,
since the original PTP_PEROUT_REQUEST doesn't support this
functionality. For an in-tree testing program, not having explicit
backwards compatibility is fine, as it should always be tested with the
current kernel headers and sources.
Tested with an oscilloscope on the felix switch PHC:
echo '2 0' > /sys/class/ptp/ptp1/pins/switch_1588_dat0
./testptp -d /dev/ptp1 -p 1000000000 -w 100000000 -H 1000 -i 0
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since 'perout' holds the nanosecond value of the signal's period, it
should be a 64-bit value. Current assumption is that it cannot be larger
than 1 second.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.8:
- A fix to the VAS code we merged this cycle, to report the proper
error code to userspace for address translation failures. And a
selftest update to match.
- Another fix for our pkey handling of PROT_EXEC mappings.
- A fix for a crash when booting a "secure VM" under an ultravisor
with certain numbers of CPUs.
Thanks to: Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan
Das, Satheesh Rajendran, Thiago Jung Bauermann"
* tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Use proper error code to check fault address
powerpc/vas: Report proper error code for address translation failure
powerpc/pseries/svm: Fix incorrect check for shared_lppaca_size
powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkey
|
|
Add tests to test_progs that exercise:
- attaching/detaching/querying programs to BPF_SK_LOOKUP hook,
- redirecting socket lookup to a socket selected by BPF program,
- failing a socket lookup on BPF program's request,
- error scenarios for selecting a socket from BPF program,
- accessing BPF program context,
- attaching and running multiple BPF programs.
Run log:
bash-5.0# ./test_progs -n 70
#70/1 query lookup prog:OK
#70/2 TCP IPv4 redir port:OK
#70/3 TCP IPv4 redir addr:OK
#70/4 TCP IPv4 redir with reuseport:OK
#70/5 TCP IPv4 redir skip reuseport:OK
#70/6 TCP IPv6 redir port:OK
#70/7 TCP IPv6 redir addr:OK
#70/8 TCP IPv4->IPv6 redir port:OK
#70/9 TCP IPv6 redir with reuseport:OK
#70/10 TCP IPv6 redir skip reuseport:OK
#70/11 UDP IPv4 redir port:OK
#70/12 UDP IPv4 redir addr:OK
#70/13 UDP IPv4 redir with reuseport:OK
#70/14 UDP IPv4 redir skip reuseport:OK
#70/15 UDP IPv6 redir port:OK
#70/16 UDP IPv6 redir addr:OK
#70/17 UDP IPv4->IPv6 redir port:OK
#70/18 UDP IPv6 redir and reuseport:OK
#70/19 UDP IPv6 redir skip reuseport:OK
#70/20 TCP IPv4 drop on lookup:OK
#70/21 TCP IPv6 drop on lookup:OK
#70/22 UDP IPv4 drop on lookup:OK
#70/23 UDP IPv6 drop on lookup:OK
#70/24 TCP IPv4 drop on reuseport:OK
#70/25 TCP IPv6 drop on reuseport:OK
#70/26 UDP IPv4 drop on reuseport:OK
#70/27 TCP IPv6 drop on reuseport:OK
#70/28 sk_assign returns EEXIST:OK
#70/29 sk_assign honors F_REPLACE:OK
#70/30 sk_assign accepts NULL socket:OK
#70/31 access ctx->sk:OK
#70/32 narrow access to ctx v4:OK
#70/33 narrow access to ctx v6:OK
#70/34 sk_assign rejects TCP established:OK
#70/35 sk_assign rejects UDP connected:OK
#70/36 multi prog - pass, pass:OK
#70/37 multi prog - drop, drop:OK
#70/38 multi prog - pass, drop:OK
#70/39 multi prog - drop, pass:OK
#70/40 multi prog - pass, redir:OK
#70/41 multi prog - redir, pass:OK
#70/42 multi prog - drop, redir:OK
#70/43 multi prog - redir, drop:OK
#70/44 multi prog - redir, redir:OK
#70 sk_lookup:OK
Summary: 1/44 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200717103536.397595-16-jakub@cloudflare.com
|
|
Exercise verifier access checks for bpf_sk_lookup context fields.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200717103536.397595-15-jakub@cloudflare.com
|
|
Fix ip_defrag.sh when CONFIG_NF_DEFRAG_IPV6=m:
$ sudo ./ip_defrag.sh
+ set -e
+ mktemp -u XXXXXX
+ readonly NETNS=ns-rGlXcw
+ trap cleanup EXIT
+ setup
+ ip netns add ns-rGlXcw
+ ip -netns ns-rGlXcw link set lo up
+ ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_high_thresh=9000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_low_thresh=7000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_time=1
+ ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_high_thresh=9000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_low_thresh=7000000
+ ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_time=1
+ ip netns exec ns-rGlXcw sysctl -w net.netfilter.nf_conntrack_frag6_high_thresh=9000000
+ cleanup
+ ip netns del ns-rGlXcw
$ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh
ls: cannot access '/proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh': No such file or directory
$ sudo modprobe nf_defrag_ipv6
$ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh
-rw-r--r-- 1 root root 0 Jul 14 12:34 /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrii reported that sockopt_inherit occasionally hangs up on 5.5 kernel [0].
This can happen if server_thread runs faster than the main thread.
In that case, pthread_cond_wait will wait forever because
pthread_cond_signal was executed before the main thread was blocking.
Let's move pthread_mutex_lock up a bit to make sure server_thread
runs strictly after the main thread goes to sleep.
(Not sure why this is 5.5 specific, maybe scheduling is less
deterministic? But I was able to confirm that it does indeed
happen in a VM.)
[0] https://lore.kernel.org/bpf/CAEf4BzY0-bVNHmCkMFPgObs=isUAyg-dFzGDY7QWYkmm7rmTSg@mail.gmail.com/
Reported-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200715224107.3591967-1-sdf@google.com
|
|
Similar to what have been done for DEVMAP, introduce tests to verify
ability to add a XDP program to an entry in a CPUMAP.
Verify CPUMAP programs can not be attached to devices as a normal
XDP program, and only programs with BPF_XDP_CPUMAP attach type can
be loaded in a CPUMAP.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/9c632fcea5382ea7b4578bd06b6eddf382c3550b.1594734381.git.lorenzo@kernel.org
|
|
Test that policers shared by different tc filters are correctly
reference counted by observing policers' occupancy via devlink-resource.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Query the maximum number of supported policers using devlink-resource
and test that this number can be reached by configuring tc filters with
police action. Test that an error is returned in case the maximum number
is exceeded.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test that upper and lower limits on rate and burst size imposed by the
device are rejected by the kernel.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test tc-police action in various scenarios such as Rx policing, Tx
policing, shared policer and police piped to mirred. The test passes
with both veth pairs and loopbacked ports.
# ./tc_police.sh
TEST: police on rx [ OK ]
TEST: police on tx [ OK ]
TEST: police with shared policer - rx [ OK ]
TEST: police with shared policer - tx [ OK ]
TEST: police rx and mirror [ OK ]
TEST: police tx and mirror [ OK ]
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ERR_NX_TRANSLATION(CSB.CC=5) is for internal to VAS for fault handling
and should not used by OS. ERR_NX_AT_FAULT(CSB.CC=250) is the proper
error code should be reported by OS when NX encounters address
translation failure.
This patch uses CC=250 to determine the fault address when the request
is not successful.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0315251705baff94f678c33178491b5008723511.camel@linux.ibm.com
|
|
During setup():
...
for ns in h0 r1 h1 h2 h3
do
create_ns ${ns}
done
...
while in cleanup():
...
for n in h1 r1 h2 h3 h4
do
ip netns del ${n} 2>/dev/null
done
...
and after removing the stderr redirection in cleanup():
$ sudo ./fib_nexthop_multiprefix.sh
...
TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ]
Cannot remove namespace file "/run/netns/h4": No such file or directory
$ echo $?
1
and a non-zero return code, make kselftests fail (even if the test
itself is fine):
...
not ok 34 selftests: net: fib_nexthop_multiprefix.sh # exit=1
...
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove double definition of structs.
Fixes: 71930d61025e ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 36 non-merge commits during the last 7 day(s) which contain
a total of 62 files changed, 2242 insertions(+), 468 deletions(-).
The main changes are:
1) Avoid trace_printk warning banner by switching bpf_trace_printk to use
its own tracing event, from Alan.
2) Better libbpf support on older kernels, from Andrii.
3) Additional AF_XDP stats, from Ciara.
4) build time resolution of BTF IDs, from Jiri.
5) BPF_CGROUP_INET_SOCK_RELEASE hook, from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a selftest for offloading a mirror action attached to the block
associated with RED early_drop qevent.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reliably remove all the type modifiers from read-only (.rodata) global
variable definitions, including cases of inner field const modifiers and
arrays of const values.
Also modify one of selftests to ensure that const volatile struct doesn't
prevent user-space from modifying .rodata variable.
Fixes: 985ead416df3 ("bpftool: Add skeleton codegen command")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200713232409.3062144-3-andriin@fb.com
|
|
Simple selftests that verifies bpf_trace_printk() returns a sensible
value and tracing messages appear.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/1594641154-18897-3-git-send-email-alan.maguire@oracle.com
|
|
Adding resolve_btfids test under test_progs suite.
It's possible to use btf_ids.h header and its logic in
user space application, so we can add easy test for it.
The test defines BTF_ID_LIST and checks it gets properly
resolved.
For this reason the test_progs binary (and other binaries
that use TRUNNER* macros) is processed with resolve_btfids
tool, which resolves BTF IDs in .BTF_ids section. The BTF
data are taken from btf_data.o object rceated from
progs/btf_data.c.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200711215329.41165-10-jolsa@kernel.org
|
|
All conflicts seemed rather trivial, with some guidance from
Saeed Mameed on the tc_ct.c one.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
BPF programs, from Maciej Żenczykowski.
2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
Mariappan.
3) Slay memory leak in nl80211 bss color attribute parsing code, from
Luca Coelho.
4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.
5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
Dumazet.
6) xsk code dips too deeply into DMA mapping implementation internals.
Add dma_need_sync and use it. From Christoph Hellwig
7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.
8) Check for disallowed attributes when loading flow dissector BPF
programs. From Lorenz Bauer.
9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
Jason A. Donenfeld.
10) Don't advertise checksum offload on ipa devices that don't support
it. From Alex Elder.
11) Resolve several issues in TCP MD5 signature support. Missing memory
barriers, bogus options emitted when using syncookies, and failure
to allow md5 key changes in established states. All from Eric
Dumazet.
12) Fix interface leak in hsr code, from Taehee Yoo.
13) VF reset fixes in hns3 driver, from Huazhong Tan.
14) Make loopback work again with ipv6 anycast, from David Ahern.
15) Fix TX starvation under high load in fec driver, from Tobias
Waldekranz.
16) MLD2 payload lengths not checked properly in bridge multicast code,
from Linus Lüssing.
17) Packet scheduler code that wants to find the inner protocol
currently only works for one level of VLAN encapsulation. Allow
Q-in-Q situations to work properly here, from Toke
Høiland-Jørgensen.
18) Fix route leak in l2tp, from Xin Long.
19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
support and various protocols. From Martin KaFai Lau.
20) Fix socket cgroup v2 reference counting in some situations, from
Cong Wang.
21) Cure memory leak in mlx5 connection tracking offload support, from
Eli Britstein.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
mlxsw: pci: Fix use-after-free in case of failed devlink reload
mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
net: macb: fix call to pm_runtime in the suspend/resume functions
net: macb: fix macb_suspend() by removing call to netif_carrier_off()
net: macb: fix macb_get/set_wol() when moving to phylink
net: macb: mark device wake capable when "magic-packet" property present
net: macb: fix wakeup test in runtime suspend/resume routines
bnxt_en: fix NULL dereference in case SR-IOV configuration fails
libbpf: Fix libbpf hashmap on (I)LP32 architectures
net/mlx5e: CT: Fix memory leak in cleanup
net/mlx5e: Fix port buffers cell size value
net/mlx5e: Fix 50G per lane indication
net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
net/mlx5e: Fix VXLAN configuration restore after function reload
net/mlx5e: Fix usage of rcu-protected pointer
net/mxl5e: Verify that rpriv is not NULL
net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
net/mlx5: Fix eeprom support for SFP module
cgroup: Fix sock_cgroup_data on big-endian.
selftests: bpf: Fix detach from sockmap tests
...
|
|
Add validating the UDP tunnel infra works.
$ ./udp_tunnel_nic.sh
PASSED all 383 checks
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull kselftest fixes from Shuah Khan:
"TPM2 test changes to run on python3 and kselftest framework fix to
incorrect return type"
* tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest: ksft_test_num return type should be unsigned
selftests: tpm: upgrade TPM2 tests from Python 2 to Python 3
|
|
Fix sockmap tests which rely on old bpf_prog_dispatch behaviour.
In the first case, the tests check that detaching without giving
a program succeeds. Since these are not the desired semantics,
invert the condition. In the second case, the clean up code doesn't
supply the necessary program fds.
Fixes: bb0de3131f4c ("bpf: sockmap: Require attach_bpf_fd when detaching a program")
Reported-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200709115151.75829-1-lmb@cloudflare.com
|
|
Test port split configuration using previously added number of port lanes
attribute.
Check that all the splittable ports are successfully split to their maximum
number of lanes and below, and that those which are not splittable fail to
be split.
Test output example:
TEST: swp4 is unsplittable [ OK ]
TEST: split port swp53 into 4 [ OK ]
TEST: Unsplit port pci/0000:03:00.0/25 [ OK ]
TEST: split port swp53 into 2 [ OK ]
TEST: Unsplit port pci/0000:03:00.0/25 [ OK ]
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull kallsyms fix from Kees Cook:
"Refactor kallsyms_show_value() users for correct cred.
I'm not delighted by the timing of getting these changes to you, but
it does fix a handful of kernel address exposures, and no one has
screamed yet at the patches.
Several users of kallsyms_show_value() were performing checks not
during "open". Refactor everything needed to gain proper checks
against file->f_cred for modules, kprobes, and bpf"
* tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: kmod: Add module address visibility test
bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()
kprobes: Do not expose probe addresses to non-CAP_SYSLOG
module: Do not expose section addresses to non-CAP_SYSLOG
module: Refactor section attr into bin attribute
kallsyms: Refactor kallsyms_show_value() to take cred
|
|
basic functional test, triggering the msk diag interface
code. Require appropriate iproute2 support, skip elsewhere.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make sure we don't regress the CAP_SYSLOG behavior of the module address
visibility via /proc/modules nor /sys/module/*/sections/*.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Switch perf_buffer test to use skeleton to avoid use of bpf_prog_load() and
make test a bit more succinct. Also switch BPF program to use tracepoint
instead of kprobe, as that allows to support older kernels, which had
tracepoint support before kprobe support in the form that libbpf expects
(i.e., libbpf expects /sys/bus/event_source/devices/kprobe/type, which doesn't
always exist on old kernels).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-7-andriin@fb.com
|
|
Add a test that relies on CO-RE, but doesn't expect any of the recent
features, not available on old kernels. This is useful for Travis CI tests
running against very old kernels (e.g., libbpf has 4.9 kernel testing now), to
verify that CO-RE still works, even if kernel itself doesn't support BTF yet,
as long as there is .BTF embedded into vmlinux image by pahole. Given most of
CO-RE doesn't require any kernel awareness of BTF, it is a useful test to
validate that libbpf's BTF sanitization is working well even with ancient
kernels.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-5-andriin@fb.com
|
|
There are a number of places in test_progs that use minus-1 as the argument
to exit(). This is confusing as a process exit status is masked to be a
number between 0 and 255 as defined in man exit(3). Thus, users will see
status 255 instead of minus-1.
This patch use positive exit code 3 instead of minus-1. These cases are put
in the same group of infrastructure setup errors.
Fixes: fd27b1835e70 ("selftests/bpf: Reset process and thread affinity after each test/sub-test")
Fixes: 811d7e375d08 ("bpf: selftests: Restore netns after each test")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159410594499.1093222.11080787853132708654.stgit@firesoul
|
|
This is a follow up adjustment to commit 6c92bd5cd465 ("selftests/bpf:
Test_progs indicate to shell on non-actions"), that returns shell exit
indication EXIT_FAILURE (value 1) when user selects a non-existing test.
The problem with using EXIT_FAILURE is that a shell script cannot tell
the difference between a non-existing test and the test failing.
This patch uses value 2 as shell exit indication.
(Aside note unrecognized option parameters use value 64).
Fixes: 6c92bd5cd465 ("selftests/bpf: Test_progs indicate to shell on non-actions")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159410593992.1093222.90072558386094370.stgit@firesoul
|
|
samples/bpf no longer use bpf_map_def_legacy and instead use the
libbpf's bpf_map_def or new BTF-defined MAP format. This commit removes
unused bpf_map_def_legacy struct from selftests/bpf/bpf_legacy.h.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200707184855.30968-5-danieltimlee@gmail.com
|
|
Simple test that enforces a single SOCK_DGRAM socket per cgroup.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200706230128.4073544-5-sdf@google.com
|
|
Fixes a compiler warning:
In file included from sync_test.c:37:
../kselftest.h: In function ‘ksft_print_cnts’:
../kselftest.h:78:16: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
if (ksft_plan != ksft_test_num())
^~
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Brian reported a crash in IPv6 code when using rpfilter with a setup
running FRR and external nexthop objects. The root cause of the crash
is fib6_select_path setting fib6_nh in the result to NULL because of
an improper check for nexthop objects.
More specifically, rpfilter invokes ip6_route_lookup with flowi6_oif
set causing fib6_select_path to be called with have_oif_match set.
fib6_select_path has early check on have_oif_match and jumps to the
out label which presumes a builtin fib6_nh. This path is invalid for
nexthop objects; for external nexthops fib6_select_path needs to just
return if the fib6_nh has already been set in the result otherwise it
returns after the call to nexthop_path_fib6_result. Update the check
on have_oif_match to not bail on external nexthops.
Update selftests for this problem.
Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info")
Reported-by: Brian Rak <brak@choopa.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Python 2 is no longer supported by the Python upstream project, so
upgrade TPM2 tests to Python 3.
Fixed minor merge conflicts
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Pengfei Xu <pengfei.xu@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
Jian Yang
David S. Miller
Linus Torvalds
David Ahern
Paolo Pisati
Yonghong Song
Ilya Leoshkevich
Briana Oursler
Vladimir Oltean
Jakub Sitnicki
Stanislav Fomichev
Lorenzo Bianconi
Ido Schimmel
Haren Myneni
Alexei Starovoitov
Petr Machata
Andrii Nakryiko
Alan Maguire
Jiri Olsa
Jakub Kicinski
Lorenz Bauer
Danielle Ratson
Paolo Abeni
Kees Cook
Jesper Dangaard Brouer
Daniel T. Lee
Paolo Bonzini
Pengfei Xu