| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Allow users to configure the critical section delay for both task/normal
and NMI contexts, and set to 20ms and 10ms as before by default.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251125020749.2421610-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add statistics per-CPU broken down by context and various timing windows
for the time taken to acquire an rqspinlock. Cases where all
acquisitions fit into the 10ms window are skipped from printing,
otherwise the full breakdown is displayed when printing the summary.
This allows capturing precisely the number of times outlier attempts
happened for a given lock in a given context.
A critical detail is that time is captured regardless of success or
failure, which is important to capture events for failed but long
waiting timeout attempts.
Output:
[ 64.279459] rqspinlock acquisition latency histogram (ms):
[ 64.279472] cpu1: total 528426 (normal 526559, nmi 1867)
[ 64.279477] 0-1ms: total 524697 (normal 524697, nmi 0)
[ 64.279480] 2-2ms: total 3652 (normal 1811, nmi 1841)
[ 64.279482] 3-3ms: total 66 (normal 47, nmi 19)
[ 64.279485] 4-4ms: total 2 (normal 1, nmi 1)
[ 64.279487] 5-5ms: total 1 (normal 1, nmi 0)
[ 64.279489] 6-6ms: total 1 (normal 0, nmi 1)
[ 64.279490] 101-150ms: total 1 (normal 0, nmi 1)
[ 64.279492] >= 251ms: total 6 (normal 2, nmi 4)
...
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251125020749.2421610-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Only require 2 CPUs for AA, 3 for ABBA, 4 for ABBCCA, which is
calculated nicely by adding to the mode enum. Enables running single CPU
AA tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251125020749.2421610-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The bench test "trig-kernel-count" can be used as a baseline comparison
for fentry and other benchmarks, and the calling to bpf_get_numa_node_id()
should be considered as composition of the baseline. So, let's call it in
trigger_count(). Meanwhile, rename trigger_count() to
trigger_kernel_count() to make it easier understand.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251116014242.151110-1-dongml2@chinatelecom.cn
|
|
Basic tests of establishing a dmabuf and revoking it. The selftest kernel
side provides a basic small dmabuf for this testing.
Link: https://patch.msgid.link/r/9-v2-b2c110338e3f+5c2-iommufd_dmabuf_jgg@nvidia.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
netdev CI reserves SKIP in selftests for cases which can't be executed
due to setup issues, like missing or old commands. Tests which are
expected to fail must use XFAIL.
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251123021601.158709-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit ensures that the required log level is set at the start of
the test iteration.
Part of the cleanup performed at the end of each test iteration resets
the log level (do_cleanup in lib_netcons.sh) to the values defined at the
time test script started. This may cause further test iterations to fail
if the default values are not sufficient.
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251121-netcons-basic-loglevel-v1-1-577f8586159c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Increase the receiver timeout. When running between machines
in different geographic regions the test needs more than
a second to SSH across and send the frames.
The bkg() command that runs the receiver defaults to 5 sec timeout,
so using 4 sec sounds like a reasonable value for the receiver itself.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the simple modulo math with the real indirection table
read from the device. This makes the tests pass for mlx5 and
bnxt NICs.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we have YNL support for RSS accessing the RSS info from
C is very easy. Instead of passing the RSS key from Python do it
directly in the C code.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure that the NIC under test is configured for pure Toeplitz
hashing, and no input key transform (no symmetric hashing).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Looks like the liburing is not updated by distros very aggressively.
Presumably because a lot of packages depend on it. I just updated
to Fedora 43 and it's still on liburing 2.9. The test is 9mo old,
at this stage I think this warrants handling the build failure
more gracefully.
Detect if iouring is recent enough and if not print a warning
and exclude the C prog from build. The Python test will just
fail since the binary won't exist. But it removes the major
annoyance of having to update liburing from sources when
developing other tests.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 31158ad02ddb ("rqspinlock: Add deadlock detection
and recovery") the updated path on re-entrancy now reports deadlock
via -EDEADLK instead of the previous -EBUSY.
Also, the way reentrancy was exercised (via fentry/lookup_elem_raw)
has been fragile because lookup_elem_raw may be inlined
(find_kernel_btf_id() will return -ESRCH).
To fix this fentry is attached to bpf_obj_free_fields() instead of
lookup_elem_raw() and:
- The htab map is made to use a BTF-described struct val with a
struct bpf_timer so that check_and_free_fields() reliably calls
bpf_obj_free_fields() on element replacement.
- The selftest is updated to do two updates to the same key (insert +
replace) in prog_test.
- The selftest is updated to align with expected errno with the
kernel’s current behavior.
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Link: https://lore.kernel.org/r/20251117060752.129648-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
vm_flags_reset() is not available in the userland VMA tests, so add a stub
which const-casts vma->vm_flags and avoids the upcoming removal of the
vma->__vm_flags field.
Link: https://lkml.kernel.org/r/4aff8bf7-d367-4ba3-90ad-13eef7a063fa@lucifer.local
Fixes: c5c67c1de357 ("tools/testing/vma: eliminate dependency on vma->__vm_flags")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: Add soft-dirty and uffd-wp support for RISC-V", v15.
This patchset adds support for Svrsw60t59b [1] extension which is ratified
now, also add soft dirty and userfaultfd write protect tracking for
RISC-V.
The patches 1 and 2 add macros to allow architectures to define their own
checks if the soft-dirty / uffd_wp PTE bits are available, in other words
for RISC-V, the Svrsw60t59b extension is supported on which device the
kernel is running. Also patch1-2 are removing "ifdef
CONFIG_MEM_SOFT_DIRTY" "ifdef CONFIG_HAVE_ARCH_USERFAULTFD_WP" and "ifdef
CONFIG_PTE_MARKER_UFFD_WP" in favor of checks which if not overridden by
the architecture, no change in behavior is expected.
This patchset has been tested with kselftest mm suite in which soft-dirty,
madv_populate, test_unmerge_uffd_wp, and uffd-unit-tests run and pass, and
no regressions are observed in any of the other tests.
This patch (of 6):
Some platforms can customize the PTE PMD entry soft-dirty bit making it
unavailable even if the architecture provides the resource.
Add an API which architectures can define their specific implementations
to detect if soft-dirty bit is available on which device the kernel is
running.
This patch is removing "ifdef CONFIG_MEM_SOFT_DIRTY" in favor of
pgtable_supports_soft_dirty() checks that defaults to
IS_ENABLED(CONFIG_MEM_SOFT_DIRTY), if not overridden by the architecture,
no change in behavior is expected.
We make sure to never set VM_SOFTDIRTY if !pgtable_supports_soft_dirty(),
so we will never run into VM_SOFTDIRTY checks.
[lorenzo.stoakes@oracle.com: fix VMA selftests]
Link: https://lkml.kernel.org/r/dac6ddfe-773a-43d5-8f69-021b9ca4d24b@lucifer.local
Link: https://lkml.kernel.org/r/20251113072806.795029-1-zhangchunyan@iscas.ac.cn
Link: https://lkml.kernel.org/r/20251113072806.795029-2-zhangchunyan@iscas.ac.cn
Link: https://github.com/riscv-non-isa/riscv-iommu/pull/543 [1]
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Conor Dooley <conor@kernel.org>
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The 'FOLL_WRITE' of the copied source is located in mm_types.h of mm, not
mm.h, so fix it.
Link: https://lkml.kernel.org/r/20251117154012.197499-2-peng8420.li@gmail.com
Signed-off-by: Peng Li <peng8420.li@gmail.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit 0f20bba1688b ("mm/gup: explicitly define and check internal GUP
flags, disallow FOLL_TOUCH") marked FOLL_TOUCH as a GUP-internal flag.
This causes a warning to fire when running gup_test, for example:
$ ./gup_test -L -r 100 -z
dmesg:
WARNING: CPU: 1 PID: 117 at mm/gup.c:2512 is_valid_gup_args+0x66/0x8c
Therefore, remove the "FOLL_TOUCH" test code from gup_test.c.
Link: https://lkml.kernel.org/r/20251117154012.197499-1-peng8420.li@gmail.com
Signed-off-by: Peng Li <peng8420.li@gmail.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add new benchmark style support to test transfer bandwidth for zone device
memory operations.
Link: https://lkml.kernel.org/r/20251001065707.920170-16-balbirs@nvidia.com
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add partial unmap test case which munmaps memory while in the device.
Add tests exercising mremap on faulted-in memory (CPU and GPU) at various
offsets and verify correctness.
Update anon_write_child to read device memory after fork verifying this
flow works in the kernel.
Both THP and non-THP cases are updated.
Link: https://lkml.kernel.org/r/20251001065707.920170-15-balbirs@nvidia.com
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add new tests for migrating anon THP pages, including anon_huge,
anon_huge_zero and error cases involving forced splitting of pages during
migration.
Link: https://lkml.kernel.org/r/20251001065707.920170-14-balbirs@nvidia.com
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
"mm/huge_memory: only get folio_order() once during __folio_split()" into
mm-stable.
|
|
Add a new test case that triggers the HW deactivation emulation path
when trapping ICV_DIR_EL1. This is obviously tied to the way KVM
works now, but the test follows the expected architectural behaviour.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-50-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
Add a new test case that inject a Group-0 interrupt together
with a bunch of Group-1 interrupts, Ack/EOI the G1 interrupts,
and only then enable G0, expecting to get the G0 interrupt.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-49-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
Add a new test case that makes an interrupt pending on a vcpu,
activates it, do the priority drop, and then get *another* vcpu
to do the deactivation.
Special care is taken not to trigger an exit in the process, so
that we are sure that the active interrupt is in an LR. Joy.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-48-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
When EOImode==1, perform the deactivation in the order of activation,
just to make things a bit worse for KVM. Yes, I'm nasty.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-47-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
Good news: our GIC emulation is not completely broken, and we can
activate as many interrupts as we want.
Bump the test to cover all the SGIs, all the allowed PPIs, and
31 SPIs. Yes, 31, because we have 31 available priorities, and the
test is not happy with having two interrupts with the same priority.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-46-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
The PPI injection API is clear that you can't inject the timer PPIs
from userspace, since they are controlled by the timers themselves.
Add an exclusion list for this purpose.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-45-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
The architecture is pretty clear that changing the configuration of
an enable interrupt is not OK. It doesn't really matter here, but
doing the right thing is not more expensive.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-44-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
No, 0 is not a spurious INTID. Never been, never was.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-43-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
Make sure G0 is disabled at the point of initialising the GIC.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-42-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
Being able to set the group of an interrupt is pretty useful.
Add such a helper.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-41-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
Commit 4dfd4bba8578 ("selftests/mm/uffd: refactor non-composite global
vars into struct") moved some of the operations previously implemented in
uffd_setup_environment() earlier in the main test loop.
The calculation of nr_pages, which involves a division by page_size, now
occurs before checking that default_huge_page_size() returns a non-zero
This leads to a division-by-zero error on systems with !CONFIG_HUGETLB.
Fix this by relocating the non-zero page_size check before the nr_pages
calculation, as it was originally implemented.
Link: https://lkml.kernel.org/r/20251113034623.3127012-1-cmllamas@google.com
Fixes: 4dfd4bba8578 ("selftests/mm/uffd: refactor non-composite global vars into struct")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Ujwal Kundur <ujwal.kundur@gmail.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently selftests require xxd with the "-n <name>" option
which allows the user to specify a name not derived from
the input object path. Instead of relying on this newer
feature, older xxd can be used if we link our desired name
("test_progs_verification_cert") to the input object.
Many distros ship xxd in vim-common package and do not have
the latest xxd with -n support.
Fixes: b720903e2b14d ("selftests/bpf: Enable signature verification for some lskel tests")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20251120084754.640405-3-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The KVM RISC-V allows SBI MPXY extensions for Guest/VM so add
it to the get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20251017155925.361560-5-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
If the linker emits warnings these should abort the build.
Otherwise they will be swallowed by run-tests.sh and not shown.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
LLVM 21 switched to -mcmodel=medium for LoongArch64 compilations.
This code model uses R_LARCH_ECALL36 relocations which might not be
supported by GNU ld which to nolibc testsuite uses by default.
ld will not resolve the relocation and all function calls will end up
as busy loops.
Use lld instead.
We can not switch to lld for all LLVM builds, as it does not support all
necessary architectures.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
As verifier now supports nested rcu critical sections, add new test
cases to make sure unbalanced usage of rcu_read_lock()/unlock() is
rejected.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251117200411.25563-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, nested rcu critical sections are rejected by the verifier and
rcu_lock state is managed by a boolean variable. Add support for nested
rcu critical sections by make active_rcu_locks a counter similar to
active_preempt_locks. bpf_rcu_read_lock() increments this counter and
bpf_rcu_read_unlock() decrements it, MEM_RCU -> PTR_UNTRUSTED transition
happens when active_rcu_locks drops to 0.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251117200411.25563-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A new test is added: caller_stack_write_tail_call tests that the live
stack is correctly tracked for a tail call.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin Teichmann <martin.teichmann@xfel.eu>
Link: https://lore.kernel.org/r/20251119160355.1160932-5-martin.teichmann@xfel.eu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Three tests are added:
- invalidate_pkt_pointers_by_tail_call checks that one can use the
packet pointer after a tail call. This was originally possible
and also poses not problems, but was made impossible by 1a4607ffba35.
- invalidate_pkt_pointers_by_static_tail_call tests a corner case
found by Eduard Zingerman during the discussion of the original fix,
which was broken in that fix.
- subprog_result_tail_call tests that precision propagation works
correctly across tail calls. This did not work before.
Signed-off-by: Martin Teichmann <martin.teichmann@xfel.eu>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251119160355.1160932-3-martin.teichmann@xfel.eu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
commit 603b44162325 ("bpf: Update the bpf_prog_calc_tag to use SHA256")
changed digest of prog_tag to SHA256 but forgot to update tests
correspondingly. Fix it.
Fixes: 603b44162325 ("bpf: Update the bpf_prog_calc_tag to use SHA256")
Signed-off-by: Xing Guo <higuoxing@gmail.com>
Link: https://lore.kernel.org/r/20251121061458.3145167-1-higuoxing@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, test_perf_branches_no_hw() relies on the busy loop within
test_perf_branches_common() being slow enough to allow at least one
perf event sample tick to occur before starting to tear down the
backing perf event BPF program. With a relatively small fixed
iteration count of 1,000,000, this is not guaranteed on modern fast
CPUs, resulting in the test run to subsequently fail with the
following:
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:PASS:output not valid 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
test_perf_branches_no_hw:PASS:perf_event_open 0 nsec
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_bad_sample:FAIL:output not valid no valid sample from prog
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
On a modern CPU (i.e. one with a 3.5 GHz clock rate), executing 1
million increments of a volatile integer can take significantly less
than 1 millisecond. If the spin loop and detachment of the perf event
BPF program elapses before the first 1 ms sampling interval elapses,
the perf event will never end up firing. Fix this by bumping the loop
iteration counter a little within test_perf_branches_common(), along
with ensuring adding another loop termination condition which is
directly influenced by the backing perf event BPF program
executing. Notably, a concious decision was made to not adjust the
sample_freq value as that is just not a reliable way to go about
fixing the problem. It effectively still leaves the race window open.
Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251119143540.2911424-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Gracefully skip the test_perf_branches_hw subtest on platforms that
do not support LBR or require specialized perf event attributes
to enable branch sampling.
For example, AMD's Milan (Zen 3) supports BRS rather than traditional
LBR. This requires specific configurations (attr.type = PERF_TYPE_RAW,
attr.config = RETIRED_TAKEN_BRANCH_INSTRUCTIONS) that differ from the
generic setup used within this test. Notably, it also probably doesn't
hold much value to special case perf event configurations for selected
micro architectures.
Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251120142059.2836181-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
arm64 JIT now supports gotox instruction and jumptables, so run tests in
verifier_gotox.c for arm64.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20251117130732.11107-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The select_reuseport selftest uses a custom sa46 union to represent
IPv4 and IPv6 addresses. This custom wrapper requires extra manual
handling for address family and field extraction.
Replace sa46 with sockaddr_storage and update the helper functions to
operate on native socket structures. This simplifies the code and
removes unnecessary custom address-handling logic. No functional
changes intended.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251121081332.2309838-3-hoyeon.lee@suse.com
|
|
The cls_redirect test uses a custom addr_port/tuple wrapper to represent
IPv4/IPv6 addresses and ports. This custom wrapper requires extra
conversion logic and specific helpers such as fill_addr_port(), which
are no longer necessary when using standard socket address structures.
This commit replaces addr_port/tuple with the standard sockaddr_storage
so test handles address families and ports using native socket types.
It removes the custom helper, eliminates redundant casts, and simplifies
the setup helpers without functional changes. set_up_conn() and
build_input() now take src/dst sockaddr_storage directly.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251121081332.2309838-2-hoyeon.lee@suse.com
|
|
Call paths leading to __virt_pg_map() are currently:
(a) virt_pg_map() -> virt_arch_pg_map() -> __virt_pg_map()
(b) virt_map_level() -> __virt_pg_map()
For (a), calls to virt_pg_map() from kvm_util.c make sure they update
vm->vpages_mapped, but other callers do not. Move the sparsebit_set()
call into virt_pg_map() to make sure all callers are captured.
For (b), call sparsebit_set_num() from virt_map_level().
It's tempting to have a single the call inside __virt_pg_map(), however:
- The call path in (a) is not x86-specific, while (b) is. Moving the
call into __virt_pg_map() would require doing something similar for
other archs implementing virt_pg_map().
- Future changes will reusue __virt_pg_map() for nested PTEs, which should
not update vm->vpages_mapped, i.e. a triple underscore version that does
not update vm->vpages_mapped would need to be provided.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251021074736.1324328-12-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Replace __virt_pg_map() calls in tests by high-level equivalent
functions, removing some loops in the process.
No functional change intended.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251021074736.1324328-11-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Setting KVM_CAP_S390_USER_OPEREXEC will forward all operation
exceptions to user space. This also includes the 0x0000 instructions
managed by KVM_CAP_S390_USER_INSTR0. It's helpful if user space wants
to emulate instructions which do not (yet) have an opcode.
While we're at it refine the documentation for
KVM_CAP_S390_USER_INSTR0.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Test querying default values and resetting to default values for
netdevsim devlink params.
This should cover the basic paths of interest: driverinit and
non-driverinit cmodes, as well as bool and non-bool value
type. Default param values of type bool are encoded with u8 netlink
type as opposed to flag type, so that userspace can distinguish
"not-present" from false.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251119025038.651131-7-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Kumar Kartikeya Dwivedi
Menglong Dong
Jason Gunthorpe
Jakub Kicinski
Andre Carvalho
Saket Kumar Bhaskar
Lorenzo Stoakes
Chunyan Zhang
Peng Li
Balbir Singh
Matthew Brost
Andrew Morton
Marc Zyngier
Carlos Llamas
Alan Maguire
Anup Patel
Thomas Weißschuh
Puranjay Mohan
Eduard Zingerman
Martin Teichmann
Xing Guo
Matt Bobrowski
Hoyeon Lee
Yosry Ahmed
Janosch Frank
Daniel Zahka