| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a test case that attaches to a traced process immediately after its
first executed vector instructions to verify the initial vector context.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Link: https://patch.msgid.link/20251214163537.1054292-7-geomatsi@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Add a test case to check ptrace behavior in the case when vector
extension is supported by the system, but vector context is not
yet enabled for the traced process.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Link: https://patch.msgid.link/20251214163537.1054292-6-geomatsi@gmail.com
[pjw@kernel.org: dropped duplicate sys/wait.h include]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
KVM SVM changes for 6.20
- Drop a user-triggerable WARN on nested_svm_load_cr3() failure.
- Add support for virtualizing ERAPS. Note, correct virtualization of ERAPS
relies on an upcoming, publicly announced change in the APM to reduce the
set of conditions where hardware (i.e. KVM) *must* flush the RAP.
- Ignore nSVM intercepts for instructions that are not supported according to
L1's virtual CPU model.
- Add support for expedited writes to the fast MMIO bus, a la VMX's fastpath
for EPT Misconfig.
- Don't set GIF when clearing EFER.SVME, as GIF exists independently of SVM,
and allow userspace to restore nested state with GIF=0.
- Treat exit_code as an unsigned 64-bit value through all of KVM.
- Add support for fetching SNP certificates from userspace.
- Fix a bug where KVM would use vmcb02 instead of vmcb01 when emulating VMLOAD
or VMSAVE on behalf of L2.
- Misc fixes and cleanups.
|
|
Pull RCU updates from Boqun Feng:
- RCU Tasks Trace:
Re-implement RCU tasks trace in term of SRCU-fast, not only more than
500 lines of code are saved because of the reimplementation, a new
set of API, rcu_read_{,un}lock_tasks_trace(), becomes possible as
well. Compared to the previous rcu_read_{,un}lock_trace(), the new
API avoid the task_struct accesses thanks to the SRCU-fast semantics.
As a result, the old rcu_read{,un}lock_trace() API is now deprecated.
- RCU Torture Test:
- Multiple improvements on kvm-series.sh (parallel run and
progress showing metrics)
- Add context checks to rcu_torture_timer()
- Make config2csv.sh properly handle comments in .boot files
- Include commit discription in testid.txt
- Miscellaneous RCU changes:
- Reduce synchronize_rcu() latency by reporting GP kthread's
CPU QS early
- Use suitable gfp_flags for the init_srcu_struct_nodes()
- Fix rcu_read_unlock() deadloop due to softirq
- Correctly compute probability to invoke ->exp_current()
in rcutorture
- Make expedited RCU CPU stall warnings detect stall-end races
- RCU nocb:
- Remove unnecessary WakeOvfIsDeferred wake path and callback
overload handling
- Extract nocb_defer_wakeup_cancel() helper
* tag 'rcu.release.v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (25 commits)
rcu/nocb: Extract nocb_defer_wakeup_cancel() helper
rcu/nocb: Remove dead callback overload handling
rcu/nocb: Remove unnecessary WakeOvfIsDeferred wake path
rcu: Reduce synchronize_rcu() latency by reporting GP kthread's CPU QS early
srcu: Use suitable gfp_flags for the init_srcu_struct_nodes()
rcu: Fix rcu_read_unlock() deadloop due to softirq
rcutorture: Correctly compute probability to invoke ->exp_current()
rcu: Make expedited RCU CPU stall warnings detect stall-end races
rcutorture: Add --kill-previous option to terminate previous kvm.sh runs
rcutorture: Prevent concurrent kvm.sh runs on same source tree
torture: Include commit discription in testid.txt
torture: Make config2csv.sh properly handle comments in .boot files
torture: Make kvm-series.sh give run numbers and totals
torture: Make kvm-series.sh give build numbers and totals
torture: Parallelize kvm-series.sh guest-OS execution
rcutorture: Add context checks to rcu_torture_timer()
rcutorture: Test rcu_tasks_trace_expedite_current()
srcu: Create an rcu_tasks_trace_expedite_current() function
checkpatch: Deprecate rcu_read_{,un}lock_trace()
rcu: Update Requirements.rst for RCU Tasks Trace
...
|
|
Pull kselftest updates from Shuah Khan:
"resctrl test:
- fix division by zero error on Hygon
- fix non-contiguous CBM check for Hygon
- define CPU vendor IDs as bits to match usage
- add CPU vendor detection for Hygon
misc:
- coredeump test: use __builtin_trap() instead of a null pointer
- anon_inode: replace null pointers with empty arrays
- kublk: include message in _Static_assert for C11 compatibility
- run_kselftest.sh: add `--skip` argument option
- pidfd: fix typo in comment"
* tag 'linux_kselftest-next-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/pidfd: fix typo in comment
selftests/run_kselftest.sh: Add `--skip` argument option
selftests/resctrl: Fix non-contiguous CBM check for Hygon
selftests/resctrl: Add CPU vendor detection for Hygon
selftests/resctrl: Define CPU vendor IDs as bits to match usage
selftests/resctrl: Fix a division by zero error on Hygon
kselftest/kublk: include message in _Static_assert for C11 compatibility
kselftest/anon_inode: replace null pointers with empty arrays
kselftest/coredump: use __builtin_trap() instead of null pointer
|
|
KVM selftests changes for 6.20
- Add a regression test for TPR<=>CR8 synchronization and IRQ masking.
- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU support,
and extend x86's infrastructure to support EPT and NPT (for L2 guests).
- Extend several nested VMX tests to also cover nested SVM.
- Add a selftest for nested VMLOAD/VMSAVE.
- Rework the nested dirty log test, originally added as a regression test for
PML where KVM logged L2 GPAs instead of L1 GPAs, to improve test coverage
and to hopefully make the test easier to understand and maintain.
|
|
Pull kunit updates from Shuah Khan:
"kunit:
- add __rust_helper to helpers
- fix up const mismatch in many assert functions
- fix up const mismatch in test_list_sort
- protect KUNIT_BINARY_STR_ASSERTION against ERR_PTR values
- respect KBUILD_OUTPUT env variable by default
- add bash completion
kunit tool:
- add test for nested test result reporting
- do not overwrite test status based on subtest counts
- add 32-bit big endian ARM configuration to qemu_configs
- rename test_data_path() to _test_data_path()
- do not rely on implicit working directory change"
* tag 'linux_kselftest-kunit-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: add bash completion
kunit: tool: test: Don't rely on implicit working directory change
kunit: tool: test: Rename test_data_path() to _test_data_path()
kunit: qemu_configs: Add 32-bit big endian ARM configuration
kunit: tool: Don't overwrite test status based on subtest counts
kunit: tool: Add test for nested test result reporting
kunit: respect KBUILD_OUTPUT env variable by default
kunit: Protect KUNIT_BINARY_STR_ASSERTION against ERR_PTR values
test_list_sort: fix up const mismatch
kunit: fix up const mis-match in many assert functions
rust: kunit: add __rust_helper to helpers
|
|
KVM/arm64 updates for 7.0
- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception.
- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process.
- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers.
- More pKVM fixes for features that are not supposed to be exposed to
guests.
- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor.
- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding.
- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest.
- Preliminary work for guest GICv5 support.
- A bunch of debugfs fixes, removing pointless custom iterators stored
in guest data structures.
- A small set of FPSIMD cleanups.
- Selftest fixes addressing the incorrect alignment of page
allocation.
- Other assorted low-impact fixes and spelling fixes.
|
|
LoongArch KVM changes for v6.20
1. Add more CPUCFG mask bits.
2. Improve feature detection.
3. Add FPU/LBT delay load support.
4. Set default return value in KVM IO bus ops.
5. Add paravirt preempt feature support.
6. Add KVM steal time test case for tools/selftests.
|
|
This warning can be seen with GCC 15.2:
mptcp_connect.c: In function ‘main_loop’:
mptcp_connect.c:1422:37: warning: ‘peer’ may be used uninitialized [-Wmaybe-uninitialized]
1422 | if (connect(fd, peer->ai_addr, peer->ai_addrlen))
| ~~~~^~~~~~~~~
mptcp_connect.c:1377:26: note: ‘peer’ was declared here
1377 | struct addrinfo *peer;
| ^~~~
This variable is set in sock_connect_mptcp() in some conditions. If not,
this helper returns an error, and the program stops. So this is a false
positive, but better removing it by initialising peer to NULL.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260205-net-mptcp-misc-fixes-6-19-rc8-v2-4-c2720ce75c34@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bpf_local_storage_free() already does not rely on local_storage->smap
since switching to kmalloc_nolock(). As local_storage->smap is removed,
fix the outdated test by dropping the local_storage->smap check. Keep
the second map in task local storage map test to test that multiple
elements can be added to the storage similar to sk storage test.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-18-ameryhung@gmail.com
|
|
bpf_cgrp_storage_busy has been removed. Use bpf_bprintf_nest_level
instead. This percpu variable is also in the bpf subsystem so that
if it is removed in the future, BPF-CI will catch this type of CI-
breaking change.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-17-ameryhung@gmail.com
|
|
Remove a test in test_maps that checks if the updating of the percpu
counter in task local storage map is preemption safe as the percpu
counter is now removed.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-16-ameryhung@gmail.com
|
|
Adjust the error code we are checking against as
bpf_task_storage_delete() now returns -EDEADLK or -ETIMEDOUT when
deadlock happens.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-15-ameryhung@gmail.com
|
|
Update the expected result of the selftest as recursion of task local
storage syscall and helpers have been relaxed. Now that the percpu
counter is removed, task local storage helpers, bpf_task_storage_get()
and bpf_task_storage_delete() can now run on the same CPU at the same
time unless they cause deadlock.
Note that since there is no percpu counter preventing recursion in
task local storage helpers, bpf_trampoline now catches the recursion
of on_update as reported by recursion_misses.
on_enter: tp_btf/sys_enter
on_update: fentry/bpf_local_storage_update
Old behavior New behavior
____________ ____________
on_enter on_enter
bpf_task_storage_get(&map_a) bpf_task_storage_get(&map_a)
bpf_task_storage_trylock succeed bpf_local_storage_update(&map_a)
bpf_local_storage_update(&map_a)
on_update on_update
bpf_task_storage_get(&map_a) bpf_task_storage_get(&map_a)
bpf_task_storage_trylock fail on_update::misses++ (1)
return NULL create and return map_a::ptr
map_a::ptr += 1 (1)
bpf_task_storage_delete(&map_a)
return 0
bpf_task_storage_get(&map_b) bpf_task_storage_get(&map_b)
bpf_task_storage_trylock fail on_update::misses++ (2)
return NULL create and return map_b::ptr
map_b::ptr += 1 (1)
create and return map_a::ptr create and return map_a::ptr
map_a::ptr = 200 map_a::ptr = 200
bpf_task_storage_get(&map_b) bpf_task_storage_get(&map_b)
bpf_task_storage_trylock succeed lockless lookup succeed
bpf_local_storage_update(&map_b) return map_b::ptr
on_update
bpf_task_storage_get(&map_a)
bpf_task_storage_trylock fail
lockless lookup succeed
return map_a::ptr
map_a::ptr += 1 (201)
bpf_task_storage_delete(&map_a)
bpf_task_storage_trylock fail
return -EBUSY
nr_del_errs++ (1)
bpf_task_storage_get(&map_b)
bpf_task_storage_trylock fail
return NULL
create and return ptr
map_b::ptr = 100
Expected result:
map_a::ptr = 201 map_a::ptr = 200
map_b::ptr = 100 map_b::ptr = 1
nr_del_err = 1 nr_del_err = 0
on_update::recursion_misses = 0 on_update::recursion_misses = 2
On_enter::recursion_misses = 0 on_enter::recursion_misses = 0
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-14-ameryhung@gmail.com
|
|
Check sk_omem_alloc when the caller of bpf_local_storage_destroy()
returns. bpf_local_storage_destroy() now returns the memory to uncharge
to the caller instead of directly uncharge. Therefore, in the
sk_storage_omem_uncharge, check sk_omem_alloc when bpf_sk_storage_free()
returns instead of bpf_local_storage_destroy().
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-13-ameryhung@gmail.com
|
|
Only build vfio self-tests on arm64 and x86_64; these are the only
architectures where the vfio self-tests are run. Addresses compiler
warnings for format and conversions on i386.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601211830.aBEjmEFD-lkp@intel.com/
Signed-off-by: Ted Logan <tedlogan@fb.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20260202-vfio-selftest-only-64bit-v2-1-9c3ebb37f0f4@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
The issue occurs in TOO_MANY_FRAGS test case when xdp_zc_max_segs is set to
an odd number.
TOO_MANY_FRAGS test case contains an invalid packet consisting of
(xdp_zc_max_segs) frags. Every frag, even the last one has XDP_PKT_CONTD
flag set. This packet is expected to be dropped. After that, there is a
valid linear packet, which is expected to be received back.
Once (xdp_zc_max_segs) is an odd number, the last packet cannot be
received, if packet forwarding between Rx and Tx interfaces relies on
the ethernet header, e.g. checks for ETH_P_LOOPBACK. Packet is malformed,
if all traffic is looped.
Turns out, sending function processes multiple invalid frags as if they
were in 2-frag packets. So once the invalid mbuf packet contains an odd
number of those, the valid packet after gets paired with the previous
invalid descriptor, and hence does not get an ethernet header generated, so
it is either dropped or malformed.
Make invalid packets in verbatim mode always have only a single frag. For
such packets, number of frags is otherwise meaningless, as descriptor flags
are pre-configured in verbatim mode and packet data is not generated for
invalid descriptors.
Fixes: 697604492b64 ("selftests/xsk: add invalid descriptor test for multi-buffer")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20260203155103.2305816-3-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Referenced commit reduced the scope of the variable pkt, so now it has to
be reinitialized via pkt_stream_get_next_rx_pkt(), which also increments
some counters. When the packet is interrupted by the batch ending, pkt
stream therefore proceeds to the next packet, while xsk ring still contains
the previous one, this results in a pkt_nb mismatch.
Decrement the affected counters when packet is interrupted.
Fixes: 8913e653e9b8 ("selftests/xsk: Iterate over all the sockets in the receive pkts function")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20260203155103.2305816-2-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Exercise various scenarios where Landlock domains are enforced across
all of a processes' threads.
Test coverage for security/landlock is 91.6% of 2130 lines according to
LLVM 21.
Cc: Andrew G. Morgan <morgan@kernel.org>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20251127115136.3064948-3-gnoack@google.com
[mic: Fix subject, use EXPECT_EQ(close()), make helpers static, add test
coverage]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Introduce the LANDLOCK_RESTRICT_SELF_TSYNC flag. With this flag, a
given Landlock ruleset is applied to all threads of the calling
process, instead of only the current one.
Without this flag, multithreaded userspace programs currently resort
to using the nptl(7)/libpsx hack for multithreaded policy enforcement,
which is also used by libcap and for setuid(2). Using this
userspace-based scheme, the threads of a process enforce the same
Landlock policy, but the resulting Landlock domains are still
separate. The domains being separate causes multiple problems:
* When using Landlock's "scoped" access rights, the domain identity is
used to determine whether an operation is permitted. As a result,
when using LANLDOCK_SCOPE_SIGNAL, signaling between sibling threads
stops working. This is a problem for programming languages and
frameworks which are inherently multithreaded (e.g. Go).
* In audit logging, the domains of separate threads in a process will
get logged with different domain IDs, even when they are based on
the same ruleset FD, which might confuse users.
Cc: Andrew G. Morgan <morgan@kernel.org>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Paul Moore <paul@paul-moore.com>
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20251127115136.3064948-2-gnoack@google.com
[mic: Fix restrict_self_flags test, clean up Makefile, allign comments,
reduce local variable scope, add missing includes]
Closes: https://github.com/landlock-lsm/linux/issues/2
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
The KVM RISC-V allows Zalasr extensions for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20251020042904.32096-1-luxu.kernel@bytedance.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Current vm modes cannot represent riscv guest modes precisely, here add
all 9 combinations of P(56,40,41) x V(57,48,39). Also the default vm
mode is detected on runtime instead of hardcoded one, which might not be
supported on specific machine.
Signed-off-by: Wu Fei <wu.fei9@sanechips.com.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20251105151442.28767-1-wu.fei9@sanechips.com.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows Zilsd and Zclsd extensions for Guest/VM so add
this extension to get-reg-list test.
Signed-off-by: Pincheng Wang <pincheng.plct@isrc.iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250826162939.1494021-6-pincheng.plct@isrc.iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The script now requires IPV6 tunnel support, enable this.
This should have caught by CI, but as the config option is missing,
the tunnel interface isn't added. This results in an error cascade
that ends with "route change default" failure.
That in turn means the "ipv6 tunnel" test re-uses the previous
test setup so the "ip6ip6" test passes and script returns 0.
Make sure to catch such bugs, set ret=1 if device cannot be added
and delete the old default route before installing the new one.
After this change, IPV6_TUNNEL=n kernel builds fail with the expected
FAIL: flow offload for ns1/ns2 with IP6IP6 tunnel
... while builds with IPV6_TUNNEL=m pass as before.
Fixes: 5e5180352193 ("selftests: netfilter: nft_flowtable.sh: Add IP6IP6 flowtable selftest")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Without the preceding patch, this fails with:
FAIL: test_udp_gro_ct: Expected udp conntrack entry
FAIL: test_udp_gro_ct: Expected software segmentation to occur, had 10 and 0
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
LoongArch KVM supports steal time accounting now, here add steal time
test case on LoongArch.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc9).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
3125fc1701694 ("net: spacemit: k1-emac: fix jumbo frame support")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aYIysFIE9ooavWia@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and Netfilter.
Previous releases - regressions:
- eth: stmmac: fix stm32 (and potentially others) resume regression
- nf_tables: fix inverted genmask check in nft_map_catchall_activate()
- usb: r8152: fix resume reset deadlock
- fix reporting RXH_XFRM_NO_CHANGE as input_xfrm for RSS contexts
Previous releases - always broken:
- sched: cls_u32: use skb_header_pointer_careful() to avoid OOB reads
with malicious u32 rules
- eth: ice: timestamping related fixes"
* tag 'net-6.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF
netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate()
net: cpsw: Execute ndo_set_rx_mode callback in a work queue
net: cpsw_new: Execute ndo_set_rx_mode callback in a work queue
gve: Correct ethtool rx_dropped calculation
gve: Fix stats report corruption on queue count change
selftest: net: add a test-case for encap segmentation after GRO
net: gro: fix outer network offset
net: add proper RCU protection to /proc/net/ptype
net: ethernet: adi: adin1110: Check return value of devm_gpiod_get_optional() in adin1110_check_spi()
wifi: iwlwifi: mvm: pause TCM on fast resume
wifi: iwlwifi: mld: cancel mlo_scan_start_wk
net: spacemit: k1-emac: fix jumbo frame support
net: enetc: Convert 16-bit register reads to 32-bit for ENETC v4
net: enetc: Convert 16-bit register writes to 32-bit for ENETC v4
net: enetc: Remove CBDR cacheability AXI settings for ENETC v4
net: enetc: Remove SI/BDR cacheability AXI settings for ENETC v4
tipc: use kfree_sensitive() for session key material
net: stmmac: fix stm32 (and potentially others) resume regression
net: rss: fix reporting RXH_XFRM_NO_CHANGE as input_xfrm for contexts
...
|
|
* kvm-arm64/resx:
: .
: Add infrastructure to deal with the full gamut of RESx bits
: for NV. As a result, it is now possible to have the expected
: semantics for some bits such as SCTLR_EL2.SPAN.
: .
KVM: arm64: Add debugfs file dumping computed RESx values
KVM: arm64: Add sanitisation to SCTLR_EL2
KVM: arm64: Remove all traces of HCR_EL2.MIOCNCE
KVM: arm64: Remove all traces of FEAT_TME
KVM: arm64: Simplify handling of full register invalid constraint
KVM: arm64: Get rid of FIXED_VALUE altogether
KVM: arm64: Simplify handling of HCR_EL2.E2H RESx
KVM: arm64: Move RESx into individual register descriptors
KVM: arm64: Add RES1_WHEN_E2Hx constraints as configuration flags
KVM: arm64: Add REQUIRES_E2H1 constraint as configuration flags
KVM: arm64: Simplify FIXED_VALUE handling
KVM: arm64: Convert HCR_EL2.RW to AS_RES1
KVM: arm64: Correctly handle SCTLR_EL1 RES1 bits for unsupported features
KVM: arm64: Allow RES1 bits to be inferred from configuration
KVM: arm64: Inherit RESx bits from FGT register descriptors
KVM: arm64: Extend unified RESx handling to runtime sanitisation
KVM: arm64: Introduce data structure tracking both RES0 and RES1 bits
KVM: arm64: Introduce standalone FGU computing primitive
KVM: arm64: Remove duplicate configuration for SCTLR_EL1.{EE,E0E}
arm64: Convert SCTLR_EL2 to sysreg infrastructure
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
FEAT_TME has been dropped from the architecture. Retrospectively.
I'm sure someone is crying somewhere, but most of us won't.
Clean-up time.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-18-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Set UBLK_TEST_DIR to ${TMPDIR:-./ublktest-dir}/${TID}.XXXXXX to create
per-test subdirectories organized by test ID. This makes it easier to
identify and debug specific test runs.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When executing the last MPTCP selftests on older kernels, this output is
printed:
# 001 no JOIN
# join Rx [SKIP]
# join Tx [SKIP]
# fallback [SKIP]
In fact, behind each line, a few counters are checked, and likely not
all of them have been skipped because the they are not available on
these kernels. Instead, "new" and unsupported counters for these groups
are now ignored, and [ OK ] will be printed instead of [SKIP].
Note that on the MPTCP CI, when validating the dev versions, any
unsupported counter will cause the tests to fail. So this is safe not to
print 'SKIP' for these group checks.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-15-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To the TFO, only the file descriptor is needed, the family is not.
Also, the error can be handled the same way when 'sendto()' or
'connect()' are used. Only the printed error message is different.
This avoids a bit of confusions.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-14-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A few loops were declaring 'i', but this variable was not used.
To avoid confusions, use '_' instead: it is more explicit to mark that
this variable is not needed.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-13-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nstat outputs are already printed when calling 'fail_test', no need to
do it again.
While at it, no need to use the dump_stats variable, print the extra
stats directly. And use 'ip -n $ns' instead of 'ip netns exec $ns',
shorter and clearer.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-12-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of waiting for a random amount of time (1 second), wait for an
event to be received on the other side.
To do that, when an address is announced (userspace_pm_add_addr), the
ANNOUNCED is expected. When a new subflow is created
(userspace_pm_add_sf), the SUB_ESTABLISHED event is expected.
With this, the tests can finish quicker.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-11-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It looks like most of the time, this helper was simply waiting a bit
more than one second: the previous MPJoin counter was often already at
the expected value. So at the end, it was just checking 10 times for
the MPJoin counter to change, but it was not happening. For the tests,
that was time, it was just waiting longer for nothing.
Instead, use 'wait_mpj' with the expected counter: in the tests, the MPJ
counter can easily be predicted. While at it, stop passing the netns as
argument: here the received MPJoin ACK is checked, which happens on the
server side. If later on, this needs to be checked on the client side,
the helper can be adapted for this case, but better avoid confusions now
if it is not needed.
While at it, stop using 'i' for the variable if it is not used.
With this, the tests can finish quicker.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-10-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'wait_mpj' was used just after having created a background connection,
but before creating new subflows. So no MPJ were sent. The intention was
to wait for the connection to be established, which was the same as
doing a simple sleep with a "random" value.
Instead, wait for an "established" event. With this, the tests can
finish quicker.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-9-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This file is the only one from this directory not to have all these
header inclusions sorted by type and alphabetical order.
Adapt them, to ease the reading, prevent conflicts during potential
future backport modifying these lines, and also to avoid having UAPI
header inclusions before libc ones, see [1].
Link: https://lore.kernel.org/20260120-uapi-sockaddr-v2-1-63c319111cf6@linutronix.de
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-8-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests for linked register tracking with negative offsets, BPF_SUB,
and alu32. These test for all edge cases like overflows, etc.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260204151741.2678118-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Previously, the verifier only tracked positive constant deltas between
linked registers using BPF_ADD. This limitation meant patterns like:
r1 = r0;
r1 += -4;
if r1 s>= 0 goto l0_%=; // r1 >= 0 implies r0 >= 4
// verifier couldn't propagate bounds back to r0
if r0 != 0 goto l0_%=;
r0 /= 0; // Verifier thinks this is reachable
l0_%=:
Similar limitation exists for 32-bit registers.
With this change, the verifier can now track negative deltas in reg->off
enabling bound propagation for the above pattern.
For alu32, we make sure the destination register has the upper 32 bits
as 0s before creating the link. BPF_ADD_CONST is split into
BPF_ADD_CONST64 and BPF_ADD_CONST32, the latter is used in case of alu32
and sync_linked_regs uses this to zext the result if known_reg has this
flag.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260204151741.2678118-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now BPF_END has bitwise tracking support. This patch adds selftests to
cover various cases of BPF_END (`bswap(16|32|64)`, `be(16|32|64)`,
`le(16|32|64)`) with bitwise propagation.
This patch is based on existing `verifier_bswap.c`, and add several
types of new tests:
1. Unconditional byte swap operations:
- bswap16/bswap32/bswap64 with unknown bytes
2. Endian conversion operations (architecture-aware):
- be16/be32/be64: convert to big-endian
* on little-endian: do swap
* on big-endian: truncation (16/32-bit) or no-op (64-bit)
- le16/le32/le64: convert to little-endian
* on big-endian: do swap
* on little-endian: truncation (16/32-bit) or no-op (64-bit)
Each test simulates realistic networking scenarios where a value is
masked with unknown bits (e.g., var_off=(0x0; 0x3f00), range=[0,0x3f00]),
then byte-swapped, and the verifier must prove the result stays within
expected bounds.
Specifically, these selftests are based on dead code elimination:
If the BPF verifier can precisely track bitwise through byte swap
operations, it can prune the trap path (invalid memory access) that
should be unreachable, allowing the program to pass verification.
If bitwise tracking is incorrect, the verifier cannot prove the trap
is unreachable, causing verification failure.
The tests use preprocessor conditionals (#ifdef __BYTE_ORDER__) to
verify correct behavior on both little-endian and big-endian
architectures, and require Clang 18+ for bswap instruction support.
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Co-developed-by: Yazhou Tang <tangyazhou518@outlook.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260204111503.77871-3-ziye@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Strengthen timer_start_deadlock test and check for recursion now
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260204055147.54960-5-alexei.starovoitov@gmail.com
|
|
Add a testcase that checks that deadlock avoidance is working
as expected.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260204055147.54960-3-alexei.starovoitov@gmail.com
|
|
Pull KVM fixes from Paolo Bonzini:
- Fix a bug where AVIC is incorrectly inhibited when running with
x2AVIC disabled via module param (or on a system without x2AVIC)
- Fix a dangling device posted IRQs bug by explicitly checking if the
irqfd is still active (on the list) when handling an eventfd signal,
instead of zeroing the irqfd's routing information when the irqfd is
deassigned.
Zeroing the irqfd's routing info causes arm64 and x86's to not
disable posting for the IRQ (kvm_arch_irq_bypass_del_producer() looks
for an MSI), incorrectly leaving the IRQ in posted mode (and leading
to use-after-free and memory leaks on AMD in particular).
This is both the most pressing and scariest, but it's been in -next
for a while.
- Disable FORTIFY_SOURCE for KVM selftests to prevent the compiler from
generating calls to the checked versions of memset() and friends,
which leads to unexpected page faults in guest code due e.g.
__memset_chk@plt not being resolved.
- Explicitly configure the supported XSS capabilities from within
{svm,vmx}_set_cpu_caps() to fix a bug where VMX will compute the
reference VMCS configuration with SHSTK and IBT enabled, but then
compute each CPUs local config with SHSTK and IBT disabled if not all
CET xfeatures are enabled, e.g. if the kernel is built with
X86_KERNEL_IBT=n.
The mismatch in features results in differing nVMX setting, and
ultimately causes kvm-intel.ko to refuse to load with nested=1.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly configure supported XSS from {svm,vmx}_set_cpu_caps()
KVM: selftests: Add -U_FORTIFY_SOURCE to avoid some unpredictable test failures
KVM: x86: Assert that non-MSI doesn't have bypass vCPU when deleting producer
KVM: Don't clobber irqfd routing type when deassigning irqfd
KVM: SVM: Check vCPU ID against max x2AVIC ID if and only if x2AVIC is enabled
|
|
Merge updates of Intel thermal drivers for 6.20/7.0:
- Add Panther Lake, Wildcat Lake and Nova Lake processor IDs to the
list of supported processors in the intel_tcc_cooling thermal
driver (Srinivas Pandruvada)
- Drop unnecessary explicit driver data clearing on removal from the
intel_pch_thermal driver (Kaushlendra Kumar)
- Add support for "slow" workload type hints to the int340x
processor_thermal driver and enable it on the Panther Lake
platform (Srinivas Pandruvada)
- Use sysfs_emit{_at}() in sysfs show functions in Intel thermal
drivers (Thorsten Blum)
- Update the x86_pkg_temp_thermal driver to handle THERMAL_TEMP_INVALID
that can be passed to it via sysfs as expected (Rafael Wysocki)
- Drop a redundant local variable from the intel_tcc_cooling thermal
driver and fix a kerneldoc comment typo in the TCC library (Sumeet
Pawnikar)
* thermal-intel:
drivers: thermal: intel: tcc_cooling: Drop redundant local variable
thermal: intel: x86_pkg_temp_thermal: Handle invalid temperature
thermal: intel: Use sysfs_emit() in a sysfs show function
thermal: intel: fix typo "nagative" in comment for cpu argument
thermal: intel: int340x: Use sysfs_emit{_at}() in sysfs show functions
thermal: intel: selftests: workload_hint: Support slow workload hints
thermal: int340x: processor_thermal: Enable slow workload type hints
thermal: intel: intel_pch_thermal: Drop explicit driver data clearing
thermal: intel: intel_tcc_cooling: Add CPU models in the support list
|
|
Add support for normalized CXL address translation through ACPI PRM method
to support AMD Zen5 platforms. Including a conventions doc that explains
how the translation is implemented and for future implementations that
need such setup to comply with the current implementation method.
cxl: Disable HPA/SPA translation handlers for Normalized Addressing
cxl/region: Factor out code into cxl_region_setup_poison()
cxl/atl: Lock decoders that need address translation
cxl: Enable AMD Zen5 address translation using ACPI PRMT
cxl/acpi: Prepare use of EFI runtime services
cxl: Introduce callback for HPA address ranges translation
cxl/region: Use region data to get the root decoder
cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos()
cxl/region: Separate region parameter setup and region construction
cxl: Simplify cxl_root_ops allocation and handling
cxl/region: Store HPA range in struct cxl_region
cxl/region: Store root decoder in struct cxl_region
cxl/region: Rename misleading variable name @hpa to @hpa_range
Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement
cxl, doc: Moving conventions in separate files
cxl, doc: Remove isonum.txt inclusion
|
|
Final KVM fixes for 6.19:
- Fix a bug where AVIC is incorrectly inhibited when running with x2AVIC
disabled via module param (or on a system without x2AVIC).
- Fix a dangling device posted IRQs bug by explicitly checking if the irqfd is
still active (on the list) when handling an eventfd signal, instead of
zeroing the irqfd's routing information when the irqfd is deassigned.
Zeroing the irqfd's routing info causes arm64 and x86's to not disable
posting for the IRQ (kvm_arch_irq_bypass_del_producer() looks for an MSI),
incorrectly leaving the IRQ in posted mode (and leading to use-after-free
and memory leaks on AMD in particular).
This is both the most pressing and scariest, but it's been in -next for
a while.
- Disable FORTIFY_SOURCE for KVM selftests to prevent the compiler from
generating calls to the checked versions of memset() and friends, which
leads to unexpected page faults in guest code due e.g. __memset_chk@plt
not being resolved.
- Explicitly configure the support XSS from within {svm,vmx}_set_cpu_caps() to
fix a bug where VMX will compute the reference VMCS configuration with SHSTK
and IBT enabled, but then compute each CPUs local config with SHSTK and IBT
disabled if not all CET xfeatures are enabled, e.g. if the kernel is built
with X86_KERNEL_IBT=n. The mismatch in features results in differing nVMX
setting, and ultimately causes kvm-intel.ko to refuse to load with nested=1.
|
|
Add AMD Zen5 support for address translation.
Zen5 systems may be configured to use 'Normalized addresses'. Then,
host physical addresses (HPA) are different from their system physical
addresses (SPA). The endpoint has its own physical address space and
an incoming HPA is already converted to the device's physical address
(DPA). Thus it has interleaving disabled and CXL endpoints are
programmed passthrough (DPA == HPA).
Host Physical Addresses (HPAs) need to be translated from the endpoint
to its CXL host bridge, esp. to identify the endpoint's root decoder
and region's address range. ACPI Platform Runtime Mechanism (PRM)
provides a handler to translate the DPA to its SPA. This is documented
in:
AMD Family 1Ah Models 00h–0Fh and Models 10h–1Fh
ACPI v6.5 Porting Guide, Publication # 58088
https://www.amd.com/en/search/documentation/hub.html
With Normalized Addressing this PRM handler must be used to translate
an HPA of an endpoint to its SPA.
Do the following to implement AMD Zen5 address translation:
Introduce a new file core/atl.c to handle ACPI PRM specific address
translation code. Naming is loosely related to the kernel's AMD
Address Translation Library (CONFIG_AMD_ATL) but implementation does
not depend on it, nor it is vendor specific. Use Kbuild and Kconfig
options respectively to enable the code depending on architecture and
platform options.
AMD Zen5 systems support the ACPI PRM CXL Address Translation firmware
call (see ACPI v6.5 Porting Guide, Address Translation - CXL DPA to
System Physical Address). Firmware enables the PRM handler if the
platform has address translation implemented. Check firmware and
kernel support of ACPI PRM using the specific GUID. On success enable
address translation by setting up the earlier introduced root port
callback, see function cxl_prm_setup_translation(). Setup is done in
cxl_setup_prm_address_translation(), it is the only function that
needs to be exported. For low level PRM firmware calls, use the ACPI
framework.
Identify the region's interleaving ways by inspecting the address
ranges. Also determine the interleaving granularity using the address
translation callback. Note that the position of the chunk from one
interleaving block to the next may vary and thus cannot be considered
constant. Address offsets larger than the interleaving block size
cannot be used to calculate the granularity. Thus, probe the
granularity using address translation for various HPAs in the same
interleaving block.
[ dj: Add atl.o build to cxl_test ]
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20260114164837.1076338-11-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
Sergey Matyukevich
Paolo Bonzini
Linus Torvalds
Matthieu Baerts (NGI0)
Amery Hung
Ted Logan
Larysa Zaremba
Günther Noack
Xu Lu
Wu Fei
Pincheng Wang
Florian Westphal
Bibo Mao
Jakub Kicinski
Marc Zyngier
Ming Lei
Puranjay Mohan
Tianci Cao
Alexei Starovoitov
Rafael J. Wysocki
Dave Jiang
Robert Richter