| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Ensure that direct mapping alias is always flushed when changing
page attributes. The optimization for small ranges failed to do so
when the virtual address was in the vmalloc or module space.
- Unbreak the trace event registration for syscalls without arguments
caused by the refactoring of the SYSCALL_DEFINE0() macro.
- Move the printk in the TSC deadline timer code to a place where it
is guaranteed to only be called once during boot and cannot be
rearmed by clearing warn_once after boot. If it's invoked post boot
then lockdep rightfully complains about a potential deadlock as the
calling context is different.
- A series of fixes for objtool and the ORC unwinder addressing
variety of small issues:
- Stack offset tracking for indirect CFAs in objtool ignored
subsequent pushs and pops
- Repair the unwind hints in the register clearing entry ASM code
- Make the unwinding in the low level exit to usermode code stop
after switching to the trampoline stack. The unwind hint is no
longer valid and the ORC unwinder emits a warning as it can't
find the registers anymore.
- Fix unwind hints in switch_to_asm() and rewind_stack_do_exit()
which caused objtool to generate bogus ORC data.
- Prevent unwinder warnings when dumping the stack of a
non-current task as there is no way to be sure about the
validity because the dumped stack can be a moving target.
- Make the ORC unwinder behave the same way as the frame pointer
unwinder when dumping an inactive tasks stack and do not skip
the first frame.
- Prevent ORC unwinding before ORC data has been initialized
- Immediately terminate unwinding when a unknown ORC entry type
is found.
- Prevent premature stop of the unwinder caused by IRET frames.
- Fix another infinite loop in objtool caused by a negative
offset which was not catched.
- Address a few build warnings in the ORC unwinder and add
missing static/ro_after_init annotations"
* tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Move ORC sorting variables under !CONFIG_MODULES
x86/apic: Move TSC deadline timer debug printk
ftrace/x86: Fix trace event registration for syscalls without arguments
x86/mm/cpa: Flush direct map alias during cpa
objtool: Fix infinite loop in for_offset_range()
x86/unwind/orc: Fix premature unwind stoppage due to IRET frames
x86/unwind/orc: Fix error path for bad ORC entry type
x86/unwind/orc: Prevent unwinding before ORC initialization
x86/unwind/orc: Don't skip the first frame for inactive tasks
x86/unwind: Prevent false warnings for non-current tasks
x86/unwind/orc: Convert global variables to static
x86/entry/64: Fix unwind hints in rewind_stack_do_exit()
x86/entry/64: Fix unwind hints in __switch_to_asm()
x86/entry/64: Fix unwind hints in kernel exit path
x86/entry/64: Fix unwind hints in register clearing code
objtool: Fix stack offset tracking for indirect CFAs
|
|
Pull objtool fix from Thomas Gleixner:
"A single fix for objtool to prevent an infinite loop in the
jump table search which can be triggered when building the
kernel with '-ffunction-sections'"
* tag 'objtool-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix infinite loop in find_jump_table()
|
|
Pull block fixes from Jens Axboe:
- a small series fixing a use-after-free of bdi name (Christoph,Yufen)
- NVMe fix for a regression with the smaller CQ update (Alexey)
- NVMe fix for a hang at namespace scanning error recovery (Sagi)
- fix race with blk-iocost iocg->abs_vdebt updates (Tejun)
* tag 'block-5.7-2020-05-09' of git://git.kernel.dk/linux-block:
nvme: fix possible hang when ns scanning fails during error recovery
nvme-pci: fix "slimmer CQ head update"
bdi: add a ->dev_name field to struct backing_dev_info
bdi: use bdi_dev_name() to get device name
bdi: move bdi_dev_name out of line
vboxsf: don't use the source name in the bdi name
iocost: protect iocg->abs_vdebt with iocg->waitq.lock
|
|
Merge misc fixes from Andrew Morton:
"14 fixes and one selftest to verify the ipc fixes herein"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: limit boost_watermark on small zones
ubsan: disable UBSAN_ALIGNMENT under COMPILE_TEST
mm/vmscan: remove unnecessary argument description of isolate_lru_pages()
epoll: atomically remove wait entry on wake up
kselftests: introduce new epoll60 testcase for catching lost wakeups
percpu: make pcpu_alloc() aware of current gfp context
mm/slub: fix incorrect interpretation of s->offset
scripts/gdb: repair rb_first() and rb_last()
eventpoll: fix missing wakeup for ovflist in ep_poll_callback
arch/x86/kvm/svm/sev.c: change flag passed to GUP fast in sev_pin_memory()
scripts/decodecode: fix trapping instruction formatting
kernel/kcov.c: fix typos in kcov_remote_start documentation
mm/page_alloc: fix watchdog soft lockups during set_zone_contiguous()
mm, memcg: fix error return value of mem_cgroup_css_alloc()
ipc/mqueue.c: change __do_notify() to bypass check_kill_permission()
|
|
The documentation for UBSAN_ALIGNMENT already mentions that it should
not be used on all*config builds (and for efficient-unaligned-access
architectures), so just refactor the Kconfig to correctly implement this
so randconfigs will stop creating insane images that freak out objtool
under CONFIG_UBSAN_TRAP (due to the false positives producing functions
that never return, etc).
Link: http://lkml.kernel.org/r/202005011433.C42EA3E2D@keescook
Fixes: 0887a7ebc977 ("ubsan: add trap instrumentation option")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/linux-next/202004231224.D6B3B650@keescook/
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This test case catches lost wake up introduced by commit 339ddb53d373
("fs/epoll: remove unnecessary wakeups of nested epoll")
The test is simple: we have 10 threads and 10 event fds. Each thread
can harvest only 1 event. 1 producer fires all 10 events at once and
waits that all 10 events will be observed by 10 threads.
In case of lost wakeup epoll_wait() will timeout and 0 will be returned.
Test case catches two sort of problems: forgotten wakeup on event, which
hits the ->ovflist list, this problem was fixed by:
5a2513239750 ("eventpoll: fix missing wakeup for ovflist in ep_poll_callback")
the other problem is when several sequential events hit the same waiting
thread, thus other waiters get no wakeups. Problem is fixed in the
following patch.
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Khazhismel Kumykov <khazhy@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Heiher <r@hev.cc>
Cc: Jason Baron <jbaron@akamai.com>
Link: http://lkml.kernel.org/r/20200430130326.1368509-1-rpenyaev@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull tracing fixes from Steven Rostedt:
- Fix bootconfig causing kernels to fail with CONFIG_BLK_DEV_RAM
enabled
- Fix allocation leaks in bootconfig tool
- Fix a double initialization of a variable
- Fix API bootconfig usage from kprobe boot time events
- Reject NULL location for kprobes
- Fix crash caused by preempt delay module not cleaning up kthread
correctly
- Add vmalloc_sync_mappings() to prevent x86_64 page faults from
recursively faulting from tracing page faults
- Fix comment in gpu/trace kerneldoc header
- Fix documentation of how to create a trace event class
- Make the local tracing_snapshot_instance_cond() function static
* tag 'trace-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tools/bootconfig: Fix resource leak in apply_xbc()
tracing: Make tracing_snapshot_instance_cond() static
tracing: Fix doc mistakes in trace sample
gpu/trace: Minor comment updates for gpu_mem_total tracepoint
tracing: Add a vmalloc_sync_mappings() for safe measure
tracing: Wait for preempt irq delay thread to finish
tracing/kprobes: Reject new event if loc is NULL
tracing/boottime: Fix kprobe event API usage
tracing/kprobes: Fix a double initialization typo
bootconfig: Fix to remove bootconfig data from initrd while boot
|
|
Pull kselftest fixes from Shuah Khan:
"ftrace test fixes and a fix to kvm Makefile for relocatable
native/cross builds and installs"
* tag 'linux-kselftest-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: fix kvm relocatable native/cross builds and installs
selftests/ftrace: Make XFAIL green color
ftrace/selftest: make unresolved cases cause failure if --fail-unresolved set
ftrace/selftests: workaround cgroup RT scheduling issues
|
|
Fix the @data and @fd allocations that are leaked in the error path of
apply_xbc().
Link: http://lkml.kernel.org/r/583a49c9-c27a-931d-e6c2-6f63a4b18bea@huawei.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"Bugfixes, mostly for ARM and AMD, and more documentation.
Slightly bigger than usual because I couldn't send out what was
pending for rc4, but there is nothing worrisome going on. I have more
fixes pending for guest debugging support (gdbstub) but I will send
them next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
KVM: selftests: Fix build for evmcs.h
kvm: x86: Use KVM CPU capabilities to determine CR4 reserved bits
KVM: VMX: Explicitly clear RFLAGS.CF and RFLAGS.ZF in VM-Exit RSB path
docs/virt/kvm: Document configuring and running nested guests
KVM: s390: Remove false WARN_ON_ONCE for the PQAP instruction
kvm: ioapic: Restrict lazy EOI update to edge-triggered interrupts
KVM: x86: Fixes posted interrupt check for IRQs delivery modes
KVM: SVM: fill in kvm_run->debug.arch.dr[67]
KVM: nVMX: Replace a BUG_ON(1) with BUG() to squash clang warning
KVM: arm64: Fix 32bit PC wrap-around
KVM: arm64: vgic-v4: Initialize GICv4.1 even in the absence of a virtual ITS
KVM: arm64: Save/restore sp_el0 as part of __guest_enter
KVM: arm64: Delete duplicated label in invalid_vector
KVM: arm64: vgic-its: Fix memory leak on the error path of vgic_add_lpi()
KVM: arm64: vgic-v3: Retire all pending LPIs on vcpu destroy
KVM: arm: vgic-v2: Only use the virtual state when userspace accesses pending bits
KVM: arm: vgic: Only use the virtual state when userspace accesses enable bits
KVM: arm: vgic: Synchronize the whole guest on GIC{D,R}_I{S,C}ACTIVER read
KVM: arm64: PSCI: Forbid 64bit functions for 32bit guests
...
|
|
Kristen found a hang in objtool when building with -ffunction-sections.
It was caused by evergreen_pcie_gen2_enable.cold() being laid out
immediately before evergreen_pcie_gen2_enable(). Since their "pfunc" is
always the same, find_jump_table() got into an infinite loop because it
didn't recognize the boundary between the two functions.
Fix that with a new prev_insn_same_sym() helper, which doesn't cross
subfunction boundaries.
Reported-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/378b51c9d9c894dc3294bc460b4b0869e950b7c5.1588110291.git.jpoimboe@redhat.com
|
|
Pull networking fixes from David Miller:
1) Fix reference count leaks in various parts of batman-adv, from Xiyu
Yang.
2) Update NAT checksum even when it is zero, from Guillaume Nault.
3) sk_psock reference count leak in tls code, also from Xiyu Yang.
4) Sanity check TCA_FQ_CODEL_DROP_BATCH_SIZE netlink attribute in
fq_codel, from Eric Dumazet.
5) Fix panic in choke_reset(), also from Eric Dumazet.
6) Fix VLAN accel handling in bnxt_fix_features(), from Michael Chan.
7) Disallow out of range quantum values in sch_sfq, from Eric Dumazet.
8) Fix crash in x25_disconnect(), from Yue Haibing.
9) Don't pass pointer to local variable back to the caller in
nf_osf_hdr_ctx_init(), from Arnd Bergmann.
10) Wireguard should use the ECN decap helper functions, from Toke
Høiland-Jørgensen.
11) Fix command entry leak in mlx5 driver, from Moshe Shemesh.
12) Fix uninitialized variable access in mptcp's
subflow_syn_recv_sock(), from Paolo Abeni.
13) Fix unnecessary out-of-order ingress frame ordering in macsec, from
Scott Dial.
14) IPv6 needs to use a global serial number for dst validation just
like ipv4, from David Ahern.
15) Fix up PTP_1588_CLOCK deps, from Clay McClure.
16) Missing NLM_F_MULTI flag in gtp driver netlink messages, from
Yoshiyuki Kurauchi.
17) Fix a regression in that dsa user port errors should not be fatal,
from Florian Fainelli.
18) Fix iomap leak in enetc driver, from Dejin Zheng.
19) Fix use after free in lec_arp_clear_vccs(), from Cong Wang.
20) Initialize protocol value earlier in neigh code paths when
generating events, from Roman Mashak.
21) netdev_update_features() must be called with RTNL mutex in macsec
driver, from Antoine Tenart.
22) Validate untrusted GSO packets even more strictly, from Willem de
Bruijn.
23) Wireguard decrypt worker needs a cond_resched(), from Jason
Donenfeld.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
net: flow_offload: skip hw stats check for FLOW_ACTION_HW_STATS_DONT_CARE
MAINTAINERS: put DYNAMIC INTERRUPT MODERATION in proper order
wireguard: send/receive: use explicit unlikely branch instead of implicit coalescing
wireguard: selftests: initalize ipv6 members to NULL to squelch clang warning
wireguard: send/receive: cond_resched() when processing worker ringbuffers
wireguard: socket: remove errant restriction on looping to self
wireguard: selftests: use normal kernel stack size on ppc64
net: ethernet: ti: am65-cpsw-nuss: fix irqs type
ionic: Use debugfs_create_bool() to export bool
net: dsa: Do not leave DSA master with NULL netdev_ops
net: dsa: remove duplicate assignment in dsa_slave_add_cls_matchall_mirred
net: stricter validation of untrusted gso packets
seg6: fix SRH processing to comply with RFC8754
net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms
net: dsa: ocelot: the MAC table on Felix is twice as large
net: dsa: sja1105: the PTP_CLK extts input reacts on both edges
selftests: net: tcp_mmap: fix SO_RCVLOWAT setting
net: hsr: fix incorrect type usage for protocol variable
net: macsec: fix rtnl locking issue
net: mvpp2: cls: Prevent buffer overflow in mvpp2_ethtool_cls_rule_del()
...
|
|
It's already possible to create two different interfaces and loop
packets between them. This has always been possible with tunnels in the
kernel, and isn't specific to wireguard. Therefore, the networking stack
already needs to deal with that. At the very least, the packet winds up
exceeding the MTU and is discarded at that point. So, since this is
already something that happens, there's no need to forbid the not very
exceptional case of routing a packet back to the same interface; this
loop is no different than others, and we shouldn't special case it, but
rather rely on generic handling of loops in general. This also makes it
easier to do interesting things with wireguard such as onion routing.
At the same time, we add a selftest for this, ensuring that both onion
routing works and infinite routing loops do not crash the kernel. We
also add a test case for wireguard interfaces nesting packets and
sending traffic between each other, as well as the loop in this case
too. We make sure to send some throughput-heavy traffic for this use
case, to stress out any possible recursion issues with the locks around
workqueues.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While at some point it might have made sense to be running these tests
on ppc64 with 4k stacks, the kernel hasn't actually used 4k stacks on
64-bit powerpc in a long time, and more interesting things that we test
don't really work when we deviate from the default (16k). So, we stop
pushing our luck in this commit, and return to the default instead of
the minimum.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since chunk_size is no longer an integer, we can not
use it directly as an argument of setsockopt().
This patch should fix tcp_mmap for Big Endian kernels.
Fixes: 597b01edafac ("selftests: net: avoid ptl lock contention in tcp_mmap")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We added fields in tcp_zerocopy_receive structure,
so make sure to clear all fields to not pass garbage to the kernel.
We were lucky because recent additions added 'out' parameters,
still we need to clean our reference implementation, before folks
copy/paste it.
Fixes: c8856c051454 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.")
Fixes: 33946518d493 ("tcp-zerocopy: Return sk_err (if set) along with tcp receive zerocopy.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I got this error when building kvm selftests:
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: multiple definition of `current_evmcs'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: first defined here
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: multiple definition of `current_vp_assist'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: first defined here
I think it's because evmcs.h is included both in a test file and a lib file so
the structs have multiple declarations when linking. After all it's not a good
habit to declare structs in the header files.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200504220607.99627-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
abs_vdebt is an atomic_64 which tracks how much over budget a given cgroup
is and controls the activation of use_delay mechanism. Once a cgroup goes
over budget from forced IOs, it has to pay it back with its future budget.
The progress guarantee on debt paying comes from the iocg being active -
active iocgs are processed by the periodic timer, which ensures that as time
passes the debts dissipate and the iocg returns to normal operation.
However, both iocg activation and vdebt handling are asynchronous and a
sequence like the following may happen.
1. The iocg is in the process of being deactivated by the periodic timer.
2. A bio enters ioc_rqos_throttle(), calls iocg_activate() which returns
without anything because it still sees that the iocg is already active.
3. The iocg is deactivated.
4. The bio from #2 is over budget but needs to be forced. It increases
abs_vdebt and goes over the threshold and enables use_delay.
5. IO control is enabled for the iocg's subtree and now IOs are attributed
to the descendant cgroups and the iocg itself no longer issues IOs.
This leaves the iocg with stuck abs_vdebt - it has debt but inactive and no
further IOs which can activate it. This can end up unduly punishing all the
descendants cgroups.
The usual throttling path has the same issue - the iocg must be active while
throttled to ensure that future event will wake it up - and solves the
problem by synchronizing the throttling path with a spinlock. abs_vdebt
handling is another form of overage handling and shares a lot of
characteristics including the fact that it isn't in the hottest path.
This patch fixes the above and other possible races by strictly
synchronizing abs_vdebt and use_delay handling with iocg->waitq.lock.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Vlad Dmitriev <vvd@fb.com>
Cc: stable@vger.kernel.org # v5.4+
Fixes: e1518f63f246 ("blk-iocost: Don't let merges push vtime into the future")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
kvm test Makefile doesn't fully support cross-builds and installs.
UNAME_M = $(shell uname -m) variable is used to define the target
programs and libraries to be built from arch specific sources in
sub-directories.
For cross-builds to work, UNAME_M has to map to ARCH and arch specific
directories and targets in this Makefile.
UNAME_M variable to used to run the compiles pointing to the right arch
directories and build the right targets for these supported architectures.
TEST_GEN_PROGS and LIBKVM are set using UNAME_M variable.
LINUX_TOOL_ARCH_INCLUDE is set using ARCH variable.
x86_64 targets are named to include x86_64 as a suffix and directories
for includes are in x86_64 sub-directory. s390x and aarch64 follow the
same convention. "uname -m" doesn't result in the correct mapping for
s390x and aarch64. Fix it to set UNAME_M correctly for s390x and aarch64
cross-builds.
In addition, Makefile doesn't create arch sub-directories in the case of
relocatable builds and test programs under s390x and x86_64 directories
fail to build. This is a problem for native and cross-builds. Fix it to
create all necessary directories keying off of TEST_GEN_PROGS.
The following use-cases work with this change:
Native x86_64:
make O=/tmp/kselftest -C tools/testing/selftests TARGETS=kvm install \
INSTALL_PATH=$HOME/x86_64
arm64 cross-build:
make O=$HOME/arm64_build/ ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- defconfig
make O=$HOME/arm64_build/ ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- all
make kselftest-install TARGETS=kvm O=$HOME/arm64_build ARCH=arm64 \
HOSTCC=gcc CROSS_COMPILE=aarch64-linux-gnu-
s390x cross-build:
make O=$HOME/s390x_build/ ARCH=s390 HOSTCC=gcc \
CROSS_COMPILE=s390x-linux-gnu- defconfig
make O=$HOME/s390x_build/ ARCH=s390 HOSTCC=gcc \
CROSS_COMPILE=s390x-linux-gnu- all
make kselftest-install TARGETS=kvm O=$HOME/s390x_build/ ARCH=s390 \
HOSTCC=gcc CROSS_COMPILE=s390x-linux-gnu- all
No regressions in the following use-cases:
make -C tools/testing/selftests TARGETS=kvm
make kselftest-all TARGETS=kvm
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Since XFAIL (Expected Failure) is expected to fail the test, which
means that test case works as we expected. IOW, XFAIL is same as
PASS. So make it green.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently, ftracetest will return 1 (failure) if any unresolved cases
are encountered. The unresolved status results from modules and
programs not being available, and as such does not indicate any
issues with ftrace itself. As such, change the behaviour of
ftracetest in line with unsupported cases; if unsupported cases
happen, ftracetest still returns 0 unless --fail-unsupported. Here
--fail-unresolved is added and the default is to return 0 if
unresolved results occur.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
wakeup_rt.tc and wakeup.tc tests in tracers/ subdirectory
fail due to the chrt command returning:
chrt: failed to set pid 0's policy: Operation not permitted.
To work around this, temporarily disable grout RT scheduling
during ftracetest execution. Restore original value on
test run completion. With these changes in place, both
tests consistently pass.
Fixes: c575dea2c1a5 ("selftests/ftrace: Add wakeup_rt tracer testcase")
Fixes: c1edd060b413 ("selftests/ftrace: Add wakeup tracer testcase")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Pull kselftest updates from Shuah Khan:
- ftrace test fixes to check for required filter files and kprobe args.
- Kselftest build/cross-build dependency check script to make it easier
for test ring admins/users to configure build systems correctly for
build/cross-build kselftests. Currently checks library dependencies.
- Checks if Kselftests can be built/cross-built on a system running
compile test on a trivial C file with LDLIBS specified for each
individual test in their Makefiles.
- Prints suggested target list for a system filtering out tests
failed the build dependency check from the TARGETS in Selftests
the main Makefile when optional -p is specified.
- Prints pass/fail dependency check for each tests/sub-test.
- Prints pass/fail targets and libraries.
- Default: runs dependency checks on all tests.
- Optional test name can be specified to check dependencies for it.
* tag 'linux-kselftest-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Check the first record for kprobe_args_type.tc
selftests: add build/cross-build dependency check script
selftests/ftrace: Check required filter files before running test
|
|
Randy reported that objtool got stuck in an infinite loop when
processing drivers/i2c/busses/i2c-parport.o. It was caused by the
following code:
00000000000001fd <line_set>:
1fd: 48 b8 00 00 00 00 00 movabs $0x0,%rax
204: 00 00 00
1ff: R_X86_64_64 .rodata-0x8
207: 41 55 push %r13
209: 41 89 f5 mov %esi,%r13d
20c: 41 54 push %r12
20e: 49 89 fc mov %rdi,%r12
211: 55 push %rbp
212: 48 89 d5 mov %rdx,%rbp
215: 53 push %rbx
216: 0f b6 5a 01 movzbl 0x1(%rdx),%ebx
21a: 48 8d 34 dd 00 00 00 lea 0x0(,%rbx,8),%rsi
221: 00
21e: R_X86_64_32S .rodata
222: 48 89 f1 mov %rsi,%rcx
225: 48 29 c1 sub %rax,%rcx
find_jump_table() saw the .rodata reference and tried to find a jump
table associated with it (though there wasn't one). The -0x8 rela
addend is unusual. It caused find_jump_table() to send a negative
table_offset (unsigned 0xfffffffffffffff8) to find_rela_by_dest().
The negative offset should have been harmless, but it actually threw
for_offset_range() for a loop... literally. When the mask value got
incremented past the end value, it also wrapped to zero, causing the
loop exit condition to remain true forever.
Prevent this scenario from happening by ensuring the incremented value
is always >= the starting value.
Fixes: 74b873e49d92 ("objtool: Optimize find_rela_by_dest_range()")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Julien Thierry <jthierry@redhat.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/02b719674b031800b61e33c30b2e823183627c19.1587842122.git.jpoimboe@redhat.com
|
|
Pull objtool fixes from Ingo Molnar:
"Two fixes: fix an off-by-one bug, and fix 32-bit builds on 64-bit
systems"
* tag 'objtool-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix off-by-one in symbol_by_offset()
objtool: Fix 32bit cross builds
|
|
When the current frame address (CFA) is stored on the stack (i.e.,
cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack
offset when there are subsequent pushes or pops. This results in bad
ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the
previous stack pointer on the stack and does a subsequent push.
This fixes the following unwinder warning:
WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0
Fixes: 627fce14809b ("objtool: Add ORC unwind table generation")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Reported-by: Dave Jones <dsj@fb.com>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Joe Mario <jmario@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com
|
|
Pull networking fixes from David Miller:
1) Fix memory leak in netfilter flowtable, from Roi Dayan.
2) Ref-count leaks in netrom and tipc, from Xiyu Yang.
3) Fix warning when mptcp socket is never accepted before close, from
Florian Westphal.
4) Missed locking in ovs_ct_exit(), from Tonghao Zhang.
5) Fix large delays during PTP synchornization in cxgb4, from Rahul
Lakkireddy.
6) team_mode_get() can hang, from Taehee Yoo.
7) Need to use kvzalloc() when allocating fw tracer in mlx5 driver,
from Niklas Schnelle.
8) Fix handling of bpf XADD on BTF memory, from Jann Horn.
9) Fix BPF_STX/BPF_B encoding in x86 bpf jit, from Luke Nelson.
10) Missing queue memory release in iwlwifi pcie code, from Johannes
Berg.
11) Fix NULL deref in macvlan device event, from Taehee Yoo.
12) Initialize lan87xx phy correctly, from Yuiko Oshino.
13) Fix looping between VRF and XFRM lookups, from David Ahern.
14) etf packet scheduler assumes all sockets are full sockets, which is
not necessarily true. From Eric Dumazet.
15) Fix mptcp data_fin handling in RX path, from Paolo Abeni.
16) fib_select_default() needs to handle nexthop objects, from David
Ahern.
17) Use GFP_ATOMIC under spinlock in mac80211_hwsim, from Wei Yongjun.
18) vxlan and geneve use wrong nlattr array, from Sabrina Dubroca.
19) Correct rx/tx stats in bcmgenet driver, from Doug Berger.
20) BPF_LDX zero-extension is encoded improperly in x86_32 bpf jit, fix
from Luke Nelson.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (100 commits)
selftests/bpf: Fix a couple of broken test_btf cases
tools/runqslower: Ensure own vmlinux.h is picked up first
bpf: Make bpf_link_fops static
bpftool: Respect the -d option in struct_ops cmd
selftests/bpf: Add test for freplace program with expected_attach_type
bpf: Propagate expected_attach_type when verifying freplace programs
bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fd
bpf, x86_32: Fix logic error in BPF_LDX zero-extension
bpf, x86_32: Fix clobbering of dst for BPF_JSET
bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension
bpf: Fix reStructuredText markup
net: systemport: suppress warnings on failed Rx SKB allocations
net: bcmgenet: suppress warnings on failed Rx SKB allocations
macsec: avoid to set wrong mtu
mac80211: sta_info: Add lockdep condition for RCU list usage
mac80211: populate debugfs only after cfg80211 init
net: bcmgenet: correct per TX/RX ring statistics
net: meth: remove spurious copyright text
net: phy: bcm84881: clear settings on link down
chcr: Fix CPU hard lockup
...
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2020-04-24
The following pull-request contains BPF updates for your *net* tree.
We've added 17 non-merge commits during the last 5 day(s) which contain
a total of 19 files changed, 203 insertions(+), 85 deletions(-).
The main changes are:
1) link_update fix, from Andrii.
2) libbpf get_xdp_id fix, from David.
3) xadd verifier fix, from Jann.
4) x86-32 JIT fixes, from Luke and Wang.
5) test_btf fix, from Stanislav.
6) freplace verifier fix, from Toke.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 51c39bb1d5d1 ("bpf: Introduce function-by-function verification")
introduced function linkage flag and changed the error message from
"vlen != 0" to "Invalid func linkage" and broke some fake BPF programs.
Adjust the test accordingly.
AFACT, the programs don't really need any arguments and only look
at BTF for maps, so let's drop the args altogether.
Before:
BTF raw test[103] (func (Non zero vlen)): do_test_raw:3703:FAIL expected
err_str:vlen != 0
magic: 0xeb9f
version: 1
flags: 0x0
hdr_len: 24
type_off: 0
type_len: 72
str_off: 72
str_len: 10
btf_total_size: 106
[1] INT (anon) size=4 bits_offset=0 nr_bits=32 encoding=SIGNED
[2] INT (anon) size=4 bits_offset=0 nr_bits=32 encoding=(none)
[3] FUNC_PROTO (anon) return=0 args=(1 a, 2 b)
[4] FUNC func type_id=3 Invalid func linkage
BTF libbpf test[1] (test_btf_haskv.o): libbpf: load bpf program failed:
Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
Validating test_long_fname_2() func#1...
Arg#0 type PTR in test_long_fname_2() is not supported yet.
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0
libbpf: -- END LOG --
libbpf: failed to load program 'dummy_tracepoint'
libbpf: failed to load object 'test_btf_haskv.o'
do_test_file:4201:FAIL bpf_object__load: -4007
BTF libbpf test[2] (test_btf_newkv.o): libbpf: load bpf program failed:
Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
Validating test_long_fname_2() func#1...
Arg#0 type PTR in test_long_fname_2() is not supported yet.
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0
libbpf: -- END LOG --
libbpf: failed to load program 'dummy_tracepoint'
libbpf: failed to load object 'test_btf_newkv.o'
do_test_file:4201:FAIL bpf_object__load: -4007
BTF libbpf test[3] (test_btf_nokv.o): libbpf: load bpf program failed:
Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
Validating test_long_fname_2() func#1...
Arg#0 type PTR in test_long_fname_2() is not supported yet.
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0
libbpf: -- END LOG --
libbpf: failed to load program 'dummy_tracepoint'
libbpf: failed to load object 'test_btf_nokv.o'
do_test_file:4201:FAIL bpf_object__load: -4007
Fixes: 51c39bb1d5d1 ("bpf: Introduce function-by-function verification")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200422003753.124921-1-sdf@google.com
|
|
Reorder include paths to ensure that runqslower sources are picking up
vmlinux.h, generated by runqslower's own Makefile. When runqslower is built
from selftests/bpf, due to current -I$(BPF_INCLUDE) -I$(OUTPUT) ordering, it
might pick up not-yet-complete vmlinux.h, generated by selftests Makefile,
which could lead to compilation errors like [0]. So ensure that -I$(OUTPUT)
goes first and rely on runqslower's Makefile own dependency chain to ensure
vmlinux.h is properly completed before source code relying on it is compiled.
[0] https://travis-ci.org/github/libbpf/libbpf/jobs/677905925
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200422012407.176303-1-andriin@fb.com
|
|
In the prog cmd, the "-d" option turns on the verifier log.
This is missed in the "struct_ops" cmd and this patch fixes it.
Fixes: 65c93628599d ("bpftool: Add struct_ops support")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200424182911.1259355-1-kafai@fb.com
|
|
This adds a new selftest that tests the ability to attach an freplace
program to a program type that relies on the expected_attach_type of the
target program to pass verification.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158773526831.293902.16011743438619684815.stgit@toke.dk
|
|
The patch fixes:
$ scripts/bpf_helpers_doc.py > bpf-helpers.rst
$ rst2man bpf-helpers.rst > bpf-helpers.7
bpf-helpers.rst:1105: (WARNING/2) Inline strong start-string without end-string.
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200422082324.2030-1-jwilk@jwilk.net
|
|
Pull power management fixes from Rafael Wysocki:
"Restore an optimization related to asynchronous suspend and resume of
devices during system-wide power transitions that was disabled by
mistake (Kai-Heng Feng) and update the pm-graph suite of power
management utilities (Todd Brandt)"
* tag 'pm-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Switch back to async_schedule_dev()
pm-graph v5.6
|
|
It is possible to get multiple records from trace during test and then more
than 4 arguments are assigned to ARGS. This situation results in the failure
of kprobe_args_type.tc. For example:
-----------------------------------------------------------
grep testprobe trace
ftracetest-5902 [001] d... 111195.682227: testprobe: (_do_fork+0x0/0x460) arg1=334823024 arg2=334823024 arg3=0x13f4fe70 arg4=7
pmlogger-5949 [000] d... 111195.709898: testprobe: (_do_fork+0x0/0x460) arg1=345308784 arg2=345308784 arg3=0x1494fe70 arg4=7
grep testprobe trace
sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'
ARGS='334823024 334823024 0x13f4fe70 7
345308784 345308784 0x1494fe70 7'
-----------------------------------------------------------
We don't care which process calls do_fork so just check the first record to
fix the issue.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add build/cross-build dependency check script kselftest_deps.sh
This script does the following:
Usage: ./kselftest_deps.sh -[p] <compiler> [test_name]
kselftest_deps.sh [-p] gcc
kselftest_deps.sh [-p] gcc vm
kselftest_deps.sh [-p] aarch64-linux-gnu-gcc
kselftest_deps.sh [-p] aarch64-linux-gnu-gcc vm
- Should be run in selftests directory in the kernel repo.
- Checks if Kselftests can be built/cross-built on a system.
- Parses all test/sub-test Makefile to find library dependencies.
- Runs compile test on a trivial C file with LDLIBS specified
in the test Makefiles to identify missing library dependencies.
- Prints suggested target list for a system filtering out tests
failed the build dependency check from the TARGETS in Selftests
the main Makefile when optional -p is specified.
- Prints pass/fail dependency check for each tests/sub-test.
- Prints pass/fail targets and libraries.
- Default: runs dependency checks on all tests.
- Optional test name can be specified to check dependencies for it.
To make LDLIBS parsing easier
- change gpio and memfd Makefiles to use the same temporary variable used
to find and add libraries to LDLIBS.
- simlify LDLIBS append logic in intel_pstate/Makefile.
Results from run on x86_64 system (trimmed detailed pass/fail list):
========================================================
Kselftest Dependency Check for [./kselftest_deps.sh gcc ] results...
========================================================
Checked tests defining LDLIBS dependencies
--------------------------------------------------------
Total tests with Dependencies:
55 Pass: 53 Fail: 2
--------------------------------------------------------
Targets passed build dependency check on system:
bpf capabilities filesystems futex gpio intel_pstate membarrier memfd
mqueue net powerpc ptp rseq rtc safesetid timens timers vDSO vm
--------------------------------------------------------
FAIL: netfilter/Makefile dependency check: -lmnl
FAIL: gpio/Makefile dependency check: -lmount
--------------------------------------------------------
Targets failed build dependency check on system:
gpio netfilter
--------------------------------------------------------
Missing libraries system
-lmnl -lmount
--------------------------------------------------------
========================================================
Results from run on x86_64 system with aarch64-linux-gnu-gcc:
(trimmed detailed pass/fail list):
========================================================
Kselftest Dependency Check for [./kselftest_deps.sh aarch64-linux-gnu-gcc ]
results...
========================================================
Checked tests defining LDLIBS dependencies
--------------------------------------------------------
Total tests with Dependencies:
55 Pass: 41 Fail: 14
--------------------------------------------------------
Targets failed build dependency check on system:
bpf capabilities filesystems futex gpio intel_pstate membarrier memfd
mqueue net powerpc ptp rseq rtc timens timers vDSO vm
--------------------------------------------------------
--------------------------------------------------------
Targets failed build dependency check on system:
bpf capabilities gpio memfd mqueue net netfilter safesetid vm
--------------------------------------------------------
Missing libraries system
-lcap -lcap-ng -lelf -lfuse -lmnl -lmount -lnuma -lpopt -lz
--------------------------------------------------------
========================================================
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Without CONFIG_DYNAMIC_FTRACE, some tests get failure because required
filter files(set_ftrace_filter/available_filter_functions/stack_trace_filter)
are missing. So implement check_filter_file() and make all related tests
check required filter files by it.
BTW: set_ftrace_filter and available_filter_functions are introduced together
so just check either of them.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The commit in the Fixes tag changed get_xdp_id to only return prog_id
if flags is 0, but there are other XDP flags than the modes - e.g.,
XDP_FLAGS_UPDATE_IF_NOEXIST. Since the intention was only to look at
MODE flags, clear other ones before checking if flags is 0.
Fixes: f07cbad29741 ("libbpf: Fix bpf_get_link_xdp_id flags handling")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrey Ignatov <rdna@fb.com>
|
|
A user reported [0] hitting the WARN_ON in fib_info_nh:
[ 8633.839816] ------------[ cut here ]------------
[ 8633.839819] WARNING: CPU: 0 PID: 1719 at include/net/nexthop.h:251 fib_select_path+0x303/0x381
...
[ 8633.839846] RIP: 0010:fib_select_path+0x303/0x381
...
[ 8633.839848] RSP: 0018:ffffb04d407f7d00 EFLAGS: 00010286
[ 8633.839850] RAX: 0000000000000000 RBX: ffff9460b9897ee8 RCX: 00000000000000fe
[ 8633.839851] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: 0000000000000000
[ 8633.839852] RBP: ffff946076049850 R08: 0000000059263a83 R09: ffff9460840e4000
[ 8633.839853] R10: 0000000000000014 R11: 0000000000000000 R12: ffffb04d407f7dc0
[ 8633.839854] R13: ffffffffa4ce3240 R14: 0000000000000000 R15: ffff9460b7681f60
[ 8633.839857] FS: 00007fcac2e02700(0000) GS:ffff9460bdc00000(0000) knlGS:0000000000000000
[ 8633.839858] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8633.839859] CR2: 00007f27beb77e28 CR3: 0000000077734000 CR4: 00000000000006f0
[ 8633.839867] Call Trace:
[ 8633.839871] ip_route_output_key_hash_rcu+0x421/0x890
[ 8633.839873] ip_route_output_key_hash+0x5e/0x80
[ 8633.839876] ip_route_output_flow+0x1a/0x50
[ 8633.839878] __ip4_datagram_connect+0x154/0x310
[ 8633.839880] ip4_datagram_connect+0x28/0x40
[ 8633.839882] __sys_connect+0xd6/0x100
...
The WARN_ON is triggered in fib_select_default which is invoked when
there are multiple default routes. Update the function to use
fib_info_nhc and convert the nexthop checks to use fib_nh_common.
Add test case that covers the affected code path.
[0] https://github.com/FRRouting/frr/issues/6089
Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sometimes, WARN_FUNC() and other users of symbol_by_offset() will
associate the first instruction of a symbol with the symbol preceding
it. This is because symbol->offset + symbol->len is already outside of
the symbol's range.
Fixes: 2a362ecc3ec9 ("objtool: Optimize find_symbol_*() and read_symbols()")
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
Apparently there's people doing 64bit builds on 32bit machines.
Fixes: 74b873e49d92 ("objtool: Optimize find_rela_by_dest_range()")
Reported-by: youling257@gmail.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
fib_tests is spewing errors:
...
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
ping: connect: Network is unreachable
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
...
Each test entry in fib_tests is supposed to do its own setup and
cleanup. Right now the $IP commands in fib_suppress_test are
failing because there is no ns1. Add the setup/cleanup and logging
expected for each test.
Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull kselftest fixes from Shuah Khan:
"This consists of fixes to runner scripts and individual test run-time
bugs. Includes fixes to tpm2 and memfd test run-time regressions"
* tag 'linux-kselftest-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ipc: Fix test failure seen after initial test run
Revert "Kernel selftests: tpm2: check for tpm support"
selftests/ftrace: Add CONFIG_SAMPLE_FTRACE_DIRECT=m kconfig
selftests/seccomp: allow clock_nanosleep instead of nanosleep
kselftest/runner: allow to properly deliver signals to tests
selftests/harness: fix spelling mistake "SIGARLM" -> "SIGALRM"
selftests: Fix memfd test run-time regression
selftests: vm: Fix 64-bit test builds for powerpc64le
selftests: vm: Do not override definition of ARCH
|
|
Merge misc fixes from Andrew Morton:
"15 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
tools/vm: fix cross-compile build
coredump: fix null pointer dereference on coredump
mm: shmem: disable interrupt when acquiring info->lock in userfaultfd_copy path
shmem: fix possible deadlocks on shmlock_user_lock
vmalloc: fix remap_vmalloc_range() bounds checks
mm/shmem: fix build without THP
mm/ksm: fix NULL pointer dereference when KSM zero page is enabled
tools/build: tweak unused value workaround
checkpatch: fix a typo in the regex for $allocFunctions
mm, gup: return EINTR when gup is interrupted by fatal signals
mm/hugetlb: fix a addressing exception caused by huge_pte_offset
MAINTAINERS: add an entry for kfifo
mm/userfaultfd: disable userfaultfd-wp on x86_32
slub: avoid redzone when choosing freepointer location
sh: fix build error in mm/init.c
|
|
Pull virtio fixes and cleanups from Michael Tsirkin:
- Some bug fixes
- Cleanup a couple of issues that surfaced meanwhile
- Disable vhost on ARM with OABI for now - to be fixed fully later in
the cycle or in the next release.
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (24 commits)
vhost: disable for OABI
virtio: drop vringh.h dependency
virtio_blk: add a missing include
virtio-balloon: Avoid using the word 'report' when referring to free page hinting
virtio-balloon: make virtballoon_free_page_report() static
vdpa: fix comment of vdpa_register_device()
vdpa: make vhost, virtio depend on menu
vdpa: allow a 32 bit vq alignment
drm/virtio: fix up for include file changes
remoteproc: pull in slab.h
rpmsg: pull in slab.h
virtio_input: pull in slab.h
remoteproc: pull in slab.h
virtio-rng: pull in slab.h
virtgpu: pull in uaccess.h
tools/virtio: make asm/barrier.h self contained
tools/virtio: define aligned attribute
virtio/test: fix up after IOTLB changes
vhost: Create accessors for virtqueues private_data
vdpasim: Return status in vdpasim_get_status
...
|
|
Commit 7ed1c1901fe5 ("tools: fix cross-compile var clobbering") moved
the setup of the CC variable to tools/scripts/Makefile.include to make
the behavior consistent across all the tools Makefiles.
As the vm tools missed the include we end up with the wrong CC in a
cross-compiling evironment.
Fixes: 7ed1c1901fe5 (tools: fix cross-compile var clobbering)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin Kelly <martin@martingkelly.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200416104748.25243-1-l.stach@pengutronix.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Clang has -Wself-assign enabled by default under -Wall, which always
gets -Werror'ed on this file, causing sync-compare-and-swap to be
disabled by default.
The generally-accepted way to spell "this value is intentionally
unused," is casting it to `void`. This is accepted by both GCC and
Clang with -Wall enabled: https://godbolt.org/z/qqZ9r3
Signed-off-by: George Burgess IV <gbiv@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: http://lkml.kernel.org/r/20200414195638.156123-1-gbiv@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch adds a test to test_verifier that writes the lower 8 bits of
R10 (aka FP) using BPF_B to an array map and reads the result back. The
expected behavior is that the result should be the same as first copying
R10 to R9, and then storing / loading the lower 8 bits of R9.
This test catches a bug that was present in the x86-64 JIT that caused
an incorrect encoding for BPF_STX BPF_B when the source operand is R10.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200418232655.23870-2-luke.r.nels@gmail.com
|
|
When check_xadd() verifies an XADD operation on a pointer to a stack slot
containing a spilled pointer, check_stack_read() verifies that the read,
which is part of XADD, is valid. However, since the placeholder value -1 is
passed as `value_regno`, check_stack_read() can only return a binary
decision and can't return the type of the value that was read. The intent
here is to verify whether the value read from the stack slot may be used as
a SCALAR_VALUE; but since check_stack_read() doesn't check the type, and
the type information is lost when check_stack_read() returns, this is not
enforced, and a malicious user can abuse XADD to leak spilled kernel
pointers.
Fix it by letting check_stack_read() verify that the value is usable as a
SCALAR_VALUE if no type information is passed to the caller.
To be able to use __is_pointer_value() in check_stack_read(), move it up.
Fix up the expected unprivileged error message for a BPF selftest that,
until now, assumed that unprivileged users can use XADD on stack-spilled
pointers. This also gives us a test for the behavior introduced in this
patch for free.
In theory, this could also be fixed by forbidding XADD on stack spills
entirely, since XADD is a locked operation (for operations on memory with
concurrency) and there can't be any concurrency on the BPF stack; but
Alexei has said that he wants to keep XADD on stack slots working to avoid
changes to the test suite [1].
The following BPF program demonstrates how to leak a BPF map pointer as an
unprivileged user using this bug:
// r7 = map_pointer
BPF_LD_MAP_FD(BPF_REG_7, small_map),
// r8 = launder(map_pointer)
BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_7, -8),
BPF_MOV64_IMM(BPF_REG_1, 0),
((struct bpf_insn) {
.code = BPF_STX | BPF_DW | BPF_XADD,
.dst_reg = BPF_REG_FP,
.src_reg = BPF_REG_1,
.off = -8
}),
BPF_LDX_MEM(BPF_DW, BPF_REG_8, BPF_REG_FP, -8),
// store r8 into map
BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_7),
BPF_MOV64_REG(BPF_REG_ARG2, BPF_REG_FP),
BPF_ALU64_IMM(BPF_ADD, BPF_REG_ARG2, -4),
BPF_ST_MEM(BPF_W, BPF_REG_ARG2, 0, 0),
BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1),
BPF_EXIT_INSN(),
BPF_STX_MEM(BPF_DW, BPF_REG_0, BPF_REG_8, 0),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN()
[1] https://lore.kernel.org/bpf/20200416211116.qxqcza5vo2ddnkdq@ast-mbp.dhcp.thefacebook.com/
Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200417000007.10734-1-jannh@google.com
|
|
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
Linus Torvalds
Kees Cook
Roman Penyaev
Yunfeng Ye
Josh Poimboeuf
Jason A. Donenfeld
Eric Dumazet
Peter Xu
Tejun Heo
Shuah Khan
Masami Hiramatsu
Alan Maguire
David S. Miller
Stanislav Fomichev
Andrii Nakryiko
Martin KaFai Lau
Toke Høiland-Jørgensen
Jakub Wilk
Xiao Yang
David Ahern
Julien Thierry
Peter Zijlstra
Lucas Stach
George Burgess IV
Luke Nelson
Jann Horn
Todd Brandt