| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
2871edb32f46 ("can: kvaser_usb: Fix possible completions during init_completion")
abb8670938b2 ("can: kvaser_usb_leaf: Ignore stale bus-off after start")
8d21f5927ae6 ("can: kvaser_usb_leaf: Fix improved state not being reported")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull networking fixes from Jakub Kicinski:
"Including fixes from 802.15.4 (Zigbee et al).
Current release - regressions:
- ipa: fix bugs in the register conversion for IPA v3.1 and v3.5.1
Current release - new code bugs:
- mptcp: fix abba deadlock on fastopen
- eth: stmmac: rk3588: allow multiple gmac controllers in one system
Previous releases - regressions:
- ip: rework the fix for dflt addr selection for connected nexthop
- net: couple more fixes for misinterpreting bits in struct page
after the signature was added
Previous releases - always broken:
- ipv6: ensure sane device mtu in tunnels
- openvswitch: switch from WARN to pr_warn on a user-triggerable path
- ethtool: eeprom: fix null-deref on genl_info in dump
- ieee802154: more return code fixes for corner cases in
dgram_sendmsg
- mac802154: fix link-quality-indicator recording
- eth: mlx5: fixes for IPsec, PTP timestamps, OvS and conntrack
offload
- eth: fec: limit register access on i.MX6UL
- eth: bcm4908_enet: update TX stats after actual transmission
- can: rcar_canfd: improve IRQ handling for RZ/G2L
Misc:
- genetlink: piggy back on the newly added resv_op_start to enforce
more sanity checks on new commands"
* tag 'net-6.1-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
net: enetc: survive memory pressure without crashing
kcm: do not sense pfmemalloc status in kcm_sendpage()
net: do not sense pfmemalloc status in skb_append_pagefrags()
net/mlx5e: Fix macsec sci endianness at rx sa update
net/mlx5e: Fix wrong bitwise comparison usage in macsec_fs_rx_add_rule function
net/mlx5e: Fix macsec rx security association (SA) update/delete
net/mlx5e: Fix macsec coverity issue at rx sa update
net/mlx5: Fix crash during sync firmware reset
net/mlx5: Update fw fatal reporter state on PCI handlers successful recover
net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed
net/mlx5e: TC, Reject forwarding from internal port to internal port
net/mlx5: Fix possible use-after-free in async command interface
net/mlx5: ASO, Create the ASO SQ with the correct timestamp format
net/mlx5e: Update restore chain id for slow path packets
net/mlx5e: Extend SKB room check to include PTP-SQ
net/mlx5: DR, Fix matcher disconnect error flow
net/mlx5: Wait for firmware to enable CRS before pci_restore_state
net/mlx5e: Do not increment ESN when updating IPsec ESN state
netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failed
netdevsim: fix memory leak in nsim_drv_probe() when nsim_dev_resources_register() failed
...
|
|
Previous commit resolves a WARN splat that can be difficult to reproduce,
but with the ovs-dpctl.py utility, it can be trivial. Introduce a test
case which creates a DP, and then downgrades the feature set. This will
include a utility 'ovs-dpctl.py' that can be extended to do additional
tests and diagnostics.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This allows the use of a matchJSON field in tests to match
against JSON output from the command under test, if that
command outputs JSON.
You specify what you want to match against as a JSON array
or object in the test's matchJSON field. You can leave out
any fields you don't want to match against that are present
in the output and they will be skipped.
An example matchJSON value would look like this:
"matchJSON": [
{
"Value": {
"neighIP": {
"family": 4,
"addr": "AQIDBA==",
"width": 32
},
"nsflags": 142,
"ncflags": 0,
"LLADDR": "ESIzRFVm"
}
}
]
The real output from the command under test might have some
extra fields that we don't care about for matching, and
since we didn't include them in our matchJSON value, those
fields will not be attempted to be matched. If everything
we included above has the same values as the real command
output, the test will pass.
The matchJSON field's type must be the same as the command
output's type, otherwise the test will fail. So if the
command outputs an array, then the value of matchJSON must
also be an array.
If matchJSON is an array, it must not contain more elements
than the command output's array, otherwise the test will
fail.
Signed-off-by: Jeremy Carter <jeremy@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20221024111603.2185410-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 0cc177cfc95d565e ("perf vendor events arm64: Add Hisi hip08 L3
metrics") add L3 metrics of hip08, but some metrics (IF_BP_MISP_BR_RET,
IF_BP_MISP_BR_RET, IF_BP_MISP_BR_BL) have incorrect event number due to
the mistakes in document, which caused incorrect result. Fix the
incorrect metrics.
Before:
65,811,214,308 armv8_pmuv3_0/event=0x1014/ # 18.87 push_branch
# -40.19 other_branch
3,564,316,780 BR_MIS_PRED # 0.51 indirect_branch
# 21.81 pop_branch
After:
6,537,146,245 BR_MIS_PRED # 0.48 indirect_branch
# 0.47 pop_branch
# 0.00 push_branch
# 0.05 other_branch
Fixes: 0cc177cfc95d565e ("perf vendor events arm64: Add Hisi hip08 L3 metrics")
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221021105035.10000-2-shangxiaojing@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For modules, names from kallsyms__parse() contain the module name which
meant that module symbols did not match exactly by name.
Fix by matching the name string up to the separating tab character.
Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221026072736.2982-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
cfef80bad4cf79cd ("perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header file")
ee3e88dfec23153d ("perf/mem: Introduce PERF_MEM_LVLNUM_{EXTN_MEM|IO}")
b4e12b2d70fd9ecc ("perf: Kill __PERF_SAMPLE_CALLCHAIN_EARLY")
There is a kernel patch pending that renames PERF_MEM_LVLNUM_EXTN_MEM to
PERF_MEM_LVLNUM_CXL, tooling this time is ahead of the kernel :-)
This thus partially addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/lkml/Y1k53KMdzypmU0WS@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
257449c6a50298bd ("x86/cpufeatures: Add LbrExtV2 feature bit")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/lkml/Y1g6vGPqPhOrXoaN@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
825cf206ed510c4a ("statx: add direct I/O alignment information")
That add a constant that was manually added to tools/perf/trace/beauty/statx.c,
at some point this should move to the shell based automated way.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/stat.h' differs from latest version at 'include/uapi/linux/stat.h'
diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h
Cc: Eric Biggers <ebiggers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Y1gGQL5LonnuzeYd@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Picking the changes from:
69ab6f5b00b1804e ("ALSA: Remove some left-over license text in include/uapi/sound/")
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
65b32f801bfbc54d ("uapi: move IPPROTO_L2TP to in.h")
5854a09b49574da5 ("net/ipv4: Use __DECLARE_FLEX_ARRAY() helper")
That ends up automatically adding the new IPPROTO_L2TP to the socket
args beautifiers:
$ tools/perf/trace/beauty/socket.sh > before
$ cp include/uapi/linux/in.h tools/include/uapi/linux/in.h
$ tools/perf/trace/beauty/socket.sh > after
$ diff -u before after
--- before 2022-10-25 12:17:02.577892416 -0300
+++ after 2022-10-25 12:17:10.806113033 -0300
@@ -20,6 +20,7 @@
[98] = "ENCAP",
[103] = "PIM",
[108] = "COMP",
+ [115] = "L2TP",
[132] = "SCTP",
[136] = "UDPLITE",
[137] = "MPLS",
$
Now 'perf trace' will decode that 115 into "L2TP" and it will also be
possible to use it in tracepoint filter expressions.
Addresses this tools/perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Wojciech Drewek <wojciech.drewek@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/lkml/Y1f%2FGe6vjQrGjYiK@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We also need to add SYM_TYPED_FUNC_START() to util/include/linux/linkage.h
and update tools/perf/check_headers.sh to ignore the include cfi_types.h
line when checking if the kernel original files drifted from the copies
we carry.
This is to get the changes from:
ccace936eec7b805 ("x86: Add types to indirectly called assembly functions")
Addressing these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/lkml/Y1f3VRIec9EBgX6F@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
0e5d5ae837c8ce04 ("arm64: Add AMPERE1 to the Spectre-BHB affected list")
That addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h'
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: D Scott Phillips <scott@os.amperecomputing.com>
https://lore.kernel.org/lkml/Y1fy5GD7ZYvkeufv@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The virtual LBR test uses a python script to check the max size of
branch stack in the Intel-PT generated LBR. But it didn't check whether
python scripting is available (as it's optional).
Let's skip the test if the python support is not available.
Fixes: f77811a0f62577d2 ("perf test: test_intel_pt.sh: Add 9 tests")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ammy Yi <ammy.yi@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221021181055.60183-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit e0b23af82d6f454c ("perf list: Add PMU pai_crypto event
description for IBM z16") introduced the "Processor Activity
Instrumentation" for cryptographic counters for z16. The PMU device
driver exports the counters via sysfs files listed in directory
/sys/devices/pai_crypto.
To specify an event from that PMU, use 'perf stat -e pai_crypto/XXX/'.
However the JSON file mentioned in above commit exports the counter
decriptions in file pmu-events/arch/s390/cf_z16/pai.json. Rename this
file to pmu-events/arch/s390/cf_z16/pai_crypto.json to make the naming
consistent.
Now 'perf list' shows the counter names under pai_crypto section:
pai_crypto:
CRYPTO_ALL
[CRYPTO ALL. Unit: pai_crypto]
...
Output before was
pai:
CRYPTO_ALL
[CRYPTO ALL. Unit: pai_crypto]
...
Fixes: e0b23af82d6f454c ("perf list: Add PMU pai_crypto event description for IBM z16")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221021082557.2695382-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The write call may set errno which is problematic if occurring in a
function also setting errno. Save and restore errno around the write
call.
done_fd may be used after close, clear it as part of the close and check
its validity in the signal handler.
Suggested-by: <gthelen@google.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anand K Mistry <amistry@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20221024011024.462518-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
During the transition to libbpf 1.0 some functions that perf used were
deprecated and finally removed from libbpf, so bpf_program__set_insns()
was introduced for perf to continue to use its bpf loader.
But when build with LIBBPF_DYNAMIC=1 we now need to check if that
function is available so that perf can build with older libbpf versions,
even if the end result is emitting a warning to the user that the use
of the perf BPF loader requires a newer libbpf, since bpf_program__set_insns()
touches libbpf objects internal state.
This affects only 'perf trace' when using bpf C code or pre-compiled
bytecode as an event.
Noticed on RHEL9, that has libbpf 0.7.0, where bpf_program__set_insns()
isn't available.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The bpf_load_program() prototype appeared in tools/lib/bpf/bpf.h as
deprecated, but nowadays its completely removed, so add it back for
building with the system libbpf when using 'make LIBBPF_DYNAMIC=1'.
This is a stop gap hack till we do like tools/bpf does with bpftool,
i.e. bootstrap the libbpf build and install it in the perf build
directory when not using 'make LIBBPF_DYNAMIC=1'.
That has to be done to all libraries in tools/lib/, so tha we can
remove -Itools/lib/ from the tools/perf CFLAGS.
Noticed when building with LIBBPF_DYNAMIC=1 and libbpf 0.7.0 on RHEL9.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Testcase stat_all_metrics.sh fails in powerpc:
90: perf all metrics test : FAILED!
The testcase "stat_all_metrics.sh" verifies perf stat result for all the
metric events present in perf list. It runs perf metric events with
various commands and expects non-empty metric result.
Incase of powerpc:hv-24x7 events, some of the event count can be 0 based
on system configuration. And if that event used as denominator in divide
equation, it can cause divide by 0 error. The current nest_metric.json
file creating divide by 0 issue for some of the metric events, which
results in failure of the "stat_all_metrics.sh" test case.
Most of the metrics events have cycles or an event which expect to have
a larger value as denominator, so adding 1 to the denominator of the
metric expression as a fix.
Result in powerpc box after this patch changes:
90: perf all metrics test : Ok
Fixes: a3cbcadfdfc330c2 ("perf vendor events power10: Adds 24x7 nest metric events for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221014140220.122251-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf build assumes documentation files starting with "perf-" are man
pages but perf-arm-coresight.txt is not a man page:
asciidoc: ERROR: perf-arm-coresight.txt: line 2: malformed manpage title
asciidoc: ERROR: perf-arm-coresight.txt: line 3: name section expected
asciidoc: FAILED: perf-arm-coresight.txt: line 3: section title expected
make[3]: *** [Makefile:266: perf-arm-coresight.xml] Error 1
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [Makefile.perf:895: man] Error 2
Fix by renaming it.
Fixes: dc2e0fb00bb2b24f ("perf test coresight: Add relevant documentation about ARM64 CoreSight testing")
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: coresight@lists.linaro.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/a176a3e1-6ddc-bb63-e41c-15cda8c2d5d2@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in these csets:
e237506238352f3b ("powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs")
That doesn't cause any changes in the perf tools.
As a reminder, this table is used in tools perf to allow features such as:
[root@five ~]# perf trace -e set_mempolicy_home_node
^C[root@five ~]#
[root@five ~]# perf trace -v -e set_mempolicy_home_node
Using CPUID AuthenticAMD-25-21-0
event qualifier tracepoint filter: (common_pid != 253729 && common_pid != 3585) && (id == 450)
mmap size 528384B
^C[root@five ~]
[root@five ~]# perf trace -v -e set* --max-events 5
Using CPUID AuthenticAMD-25-21-0
event qualifier tracepoint filter: (common_pid != 253734 && common_pid != 3585) && (id == 38 || id == 54 || id == 105 || id == 106 || id == 109 || id == 112 || id == 113 || id == 114 || id == 116 || id == 117 || id == 119 || id == 122 || id == 123 || id == 141 || id == 160 || id == 164 || id == 170 || id == 171 || id == 188 || id == 205 || id == 218 || id == 238 || id == 273 || id == 308 || id == 450)
mmap size 528384B
0.000 ( 0.008 ms): bash/253735 setpgid(pid: 253735 (bash), pgid: 253735 (bash)) = 0
6849.011 ( 0.008 ms): bash/16046 setpgid(pid: 253736 (bash), pgid: 253736 (bash)) = 0
6849.080 ( 0.005 ms): bash/253736 setpgid(pid: 253736 (bash), pgid: 253736 (bash)) = 0
7437.718 ( 0.009 ms): gnome-shell/253737 set_robust_list(head: 0x7f34b527e920, len: 24) = 0
13445.986 ( 0.010 ms): bash/16046 setpgid(pid: 253738 (bash), pgid: 253738 (bash)) = 0
[root@five ~]#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ find tools/perf/arch/ -name "syscall*tbl" | xargs grep -w set_mempolicy_home_node
tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node
tools/perf/arch/powerpc/entry/syscalls/syscall.tbl:450 nospu set_mempolicy_home_node sys_set_mempolicy_home_node
tools/perf/arch/s390/entry/syscalls/syscall.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node sys_set_mempolicy_home_node
tools/perf/arch/x86/entry/syscalls/syscall_64.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node
$
$ grep -w set_mempolicy_home_node /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c
[450] = "set_mempolicy_home_node",
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/lkml/Y01HN2DGkWz8tC%2FJ@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some highly optimised applications use SO_INCOMING_CPU to make them
efficient, but they didn't test if it's working correctly by getsockopt()
to avoid slowing down. As a result, no one noticed it had been broken
for years, so it's a good time to add a test to catch future regression.
The test does
1) Create $(nproc) TCP listeners associated with each CPU.
2) Create 32 child sockets for each listener by calling
sched_setaffinity() for each CPU.
3) Check if accept()ed sockets' sk_incoming_cpu matches
listener's one.
If we see -EAGAIN, SO_INCOMING_CPU is broken. However, we might not see
any error even if broken; the kernel could miraculously distribute all SYN
to correct listeners. Not to let that happen, we must increase the number
of clients and CPUs to some extent, so the test requires $(nproc) >= 2 and
creates 64 sockets at least.
Test:
$ nproc
96
$ ./so_incoming_cpu
Before the previous patch:
# Starting 12 tests from 5 test cases.
# RUN so_incoming_cpu.before_reuseport.test1 ...
# so_incoming_cpu.c:191:test1:Expected cpu (5) == i (0)
# test1: Test terminated by assertion
# FAIL so_incoming_cpu.before_reuseport.test1
not ok 1 so_incoming_cpu.before_reuseport.test1
...
# FAILED: 0 / 12 tests passed.
# Totals: pass:0 fail:12 xfail:0 xpass:0 skip:0 error:0
After:
# Starting 12 tests from 5 test cases.
# RUN so_incoming_cpu.before_reuseport.test1 ...
# so_incoming_cpu.c:199:test1:SO_INCOMING_CPU is very likely to be working correctly with 3072 sockets.
# OK so_incoming_cpu.before_reuseport.test1
ok 1 so_incoming_cpu.before_reuseport.test1
...
# PASSED: 12 / 12 tests passed.
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
include/linux/net.h
a5ef058dc4d9 ("net: introduce and use custom sockopt socket flag")
e993ffe3da4b ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
The net-memcg fix stands out, the rest is very run-off-the-mill. Maybe
I'm biased.
Current release - regressions:
- eth: fman: re-expose location of the MAC address to userspace,
apparently some udev scripts depended on the exact value
Current release - new code bugs:
- bpf:
- wait for busy refill_work when destroying bpf memory allocator
- allow bpf_user_ringbuf_drain() callbacks to return 1
- fix dispatcher patchable function entry to 5 bytes nop
Previous releases - regressions:
- net-memcg: avoid stalls when under memory pressure
- tcp: fix indefinite deferral of RTO with SACK reneging
- tipc: fix a null-ptr-deref in tipc_topsrv_accept
- eth: macb: specify PHY PM management done by MAC
- tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
Previous releases - always broken:
- eth: amd-xgbe: SFP fixes and compatibility improvements
Misc:
- docs: netdev: offer performance feedback to contributors"
* tag 'net-6.1-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
net-memcg: avoid stalls when under memory pressure
tcp: fix indefinite deferral of RTO with SACK reneging
tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY
net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed
docs: netdev: offer performance feedback to contributors
kcm: annotate data-races around kcm->rx_wait
kcm: annotate data-races around kcm->rx_psock
net: fman: Use physical address for userspace interfaces
net/mlx5e: Cleanup MACsec uninitialization routine
atlantic: fix deadlock at aq_nic_stop
nfp: only clean `sp_indiff` when application firmware is unloaded
amd-xgbe: add the bit rate quirk for Molex cables
amd-xgbe: fix the SFP compliance codes check for DAC cables
amd-xgbe: enable PLL_CTL for fixed PHY modes only
amd-xgbe: use enums for mailbox cmd and sub_cmds
amd-xgbe: Yellow carp devices do not need rrc
bpf: Use __llist_del_all() whenever possbile during memory draining
bpf: Wait for busy refill_work when destroying bpf memory allocator
MAINTAINERS: add keyword match on PTP
...
|
|
Pull Kselftest fixes from Shuah Khan:
- futex, intel_pstate, kexec build fixes
- ftrace dynamic_events dependency check fix
- memory-hotplug fix to remove redundant warning from test report
* tag 'linux-kselftest-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: fix dynamic_events dependency check
selftests/memory-hotplug: Remove the redundant warning information
selftests/kexec: fix build for ARCH=x86_64
selftests/intel_pstate: fix build for ARCH=x86_64
selftests/futex: fix build for clang
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2022-10-23
We've added 7 non-merge commits during the last 18 day(s) which contain
a total of 8 files changed, 69 insertions(+), 5 deletions(-).
The main changes are:
1) Wait for busy refill_work when destroying bpf memory allocator, from Hou.
2) Allow bpf_user_ringbuf_drain() callbacks to return 1, from David.
3) Fix dispatcher patchable function entry to 5 bytes nop, from Jiri.
4) Prevent decl_tag from being referenced in func_proto, from Stanislav.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Use __llist_del_all() whenever possbile during memory draining
bpf: Wait for busy refill_work when destroying bpf memory allocator
bpf: Fix dispatcher patchable function entry to 5 bytes nop
bpf: prevent decl_tag from being referenced in func_proto
selftests/bpf: Add reproducer for decl_tag in func_proto return type
selftests/bpf: Make bpf_user_ringbuf_drain() selftest callback return 1
bpf: Allow bpf_user_ringbuf_drain() callbacks to return 1
====================
Link: https://lore.kernel.org/r/20221023192244.81137-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc
ARM:
- Fix a bug preventing restoring an ITS containing mappings for very
large and very sparse device topology
- Work around a relocation handling error when compiling the nVHE
object with profile optimisation
- Fix for stage-2 invalidation holding the VM MMU lock for too long
by limiting the walk to the largest block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
x86:
- add compat implementation for KVM_X86_SET_MSR_FILTER ioctl
selftests:
- synchronize includes between include/uapi and tools/include/uapi"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
tools: include: sync include/api/linux/kvm.h
KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
kvm: Add support for arch compat vm ioctls
RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
RISC-V: Fix compilation without RISCV_ISA_ZICBOM
KVM: arm64: vgic: Fix exit condition in scan_its_table()
KVM: arm64: nvhe: Fix build with profile optimization
KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
KVM: arm64: selftests: Fix multiple versions of GIC creation
KVM: arm64: Enable stack protection and branch profiling for VHE
KVM: arm64: Limit stage2_apply_range() batch size to largest block
KVM: arm64: Work out supported block level at compile time
|
|
Pull perf fixes from Borislav Petkov:
- Fix raw data handling when perf events are used in bpf
- Rework how SIGTRAPs get delivered to events to address a bunch of
problems with it. Add a selftest for that too
* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bpf: Fix sample_flags for bpf_perf_event_output
selftests/perf_events: Add a SIGTRAP stress test with disables
perf: Fix missing SIGTRAPs
|
|
Provide a definition of KVM_CAP_DIRTY_LOG_RING_ACQ_REL.
Fixes: 17601bfed909 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM/arm64 fixes for 6.1, take #1
- Fix for stage-2 invalidation holding the VM MMU lock
for too long by limiting the walk to the largest
block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
|
|
Pull tracing tool update from Steven Rostedt:
- Make dot2c generate monitor's automata definition static
* tag 'trace-tools-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv/dot2c: Make automaton definition static
|
|
lag_lib.sh creates the interfaces dummy1 and dummy2 whereas
dev_addr_lists.sh:destroy() deletes the interfaces dummy0 and dummy1. Fix
the mismatch in names.
Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When exporting and running a subset of selftests via kselftest, files from
parts of the source tree which were not exported are not available. A few
tests are trying to source such files. Address the problem by using
symlinks.
The problem can be reproduced by running:
make -C tools/testing/selftests gen_tar TARGETS="drivers/net/bonding"
[... extract archive ...]
./run_kselftest.sh
or:
make kselftest KBUILD_OUTPUT=/tmp/kselftests TARGETS="drivers/net/bonding"
Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management")
Fixes: eccd0a80dc7f ("selftests: net: dsa: add a stress test for unlocked FDB operations")
Link: https://lore.kernel.org/netdev/40f04ded-0c86-8669-24b1-9a313ca21076@redhat.com/
Reported-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- revert "net: fix cpu_max_bits_warn() usage in
netif_attrmask_next{,_and}"
- revert "net: sched: fq_codel: remove redundant resource cleanup in
fq_codel_init()"
- dsa: uninitialized variable in dsa_slave_netdevice_event()
- eth: sunhme: uninitialized variable in happy_meal_init()
Current release - new code bugs:
- eth: octeontx2: fix resource not freed after malloc
Previous releases - regressions:
- sched: fix return value of qdisc ingress handling on success
- sched: fix race condition in qdisc_graft()
- udp: update reuse->has_conns under reuseport_lock.
- tls: strp: make sure the TCP skbs do not have overlapping data
- hsr: avoid possible NULL deref in skb_clone()
- tipc: fix an information leak in tipc_topsrv_kern_subscr
- phylink: add mac_managed_pm in phylink_config structure
- eth: i40e: fix DMA mappings leak
- eth: hyperv: fix a RX-path warning
- eth: mtk: fix memory leaks
Previous releases - always broken:
- sched: cake: fix null pointer access issue when cake_init() fails"
* tag 'net-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
net: phy: dp83822: disable MDI crossover status change interrupt
net: sched: fix race condition in qdisc_graft()
net: hns: fix possible memory leak in hnae_ae_register()
wwan_hwsim: fix possible memory leak in wwan_hwsim_dev_new()
sfc: include vport_id in filter spec hash and equal()
genetlink: fix kdoc warnings
selftests: add selftest for chaining of tc ingress handling to egress
net: Fix return value of qdisc ingress handling on success
net: sched: sfb: fix null pointer access issue when sfb_init() fails
Revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()"
net: sched: cake: fix null pointer access issue when cake_init() fails
ethernet: marvell: octeontx2 Fix resource not freed after malloc
netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements
netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces.
ionic: catch NULL pointer issue on reconfig
net: hsr: avoid possible NULL deref in skb_clone()
bnxt_en: fix memory leak in bnxt_nvm_test()
ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failed
udp: Update reuse->has_conns under reuseport_lock.
net: ethernet: mediatek: ppe: Remove the unused function mtk_foe_entry_usable()
...
|
|
Monitor's automata definition is only used locally, so make dot2c generate
a static definition.
Link: https://lore.kernel.org/all/202208210332.gtHXje45-lkp@intel.com
Link: https://lore.kernel.org/all/202208210358.6HH3OrVs-lkp@intel.com
Link: https://lkml.kernel.org/r/ffbb92010f643307766c9307fd42f416e5b85fa0.1661266564.git.bristot@kernel.org
Cc: Steven Rostedt <rostedt@goodmis.org>
Fixes: e3c9fc78f096 ("tools/rv: Add dot2c")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
This test runs a simple ingress tc setup between two veth pairs,
then adds a egress->ingress rule to test the chaining of tc ingress
pipeline to tc egress piepline.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test group address is added and removed in v2reportleave_test().
There is no need to delete it again during cleanup as it results in the
following error message:
# bash -x ./bridge_igmp.sh
[...]
+ cleanup
+ pre_cleanup
[...]
+ ip address del dev swp4 239.10.10.10/32
RTNETLINK answers: Cannot assign requested address
+ h2_destroy
Solve by removing the unnecessary address deletion.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The qdiscs are added during setup, but not deleted during cleanup,
resulting in the following error messages:
# ./bridge_vlan_mcast.sh
[...]
# ./bridge_vlan_mcast.sh
Error: Exclusivity flag on, cannot modify.
Error: Exclusivity flag on, cannot modify.
Solve by deleting the qdiscs during cleanup.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-10-18
We've added 33 non-merge commits during the last 14 day(s) which contain
a total of 31 files changed, 874 insertions(+), 538 deletions(-).
The main changes are:
1) Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs,
from Hou Tao & Paul E. McKenney.
2) Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values. In the wild we have seen OS vendors doing buggy backports
where helper call numbers mismatched. This is an attempt to make
backports more foolproof, from Andrii Nakryiko.
3) Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions,
from Roberto Sassu.
4) Fix libbpf's BTF dumper for structs with padding-only fields,
from Eduard Zingerman.
5) Fix various libbpf bugs which have been found from fuzzing with
malformed BPF object files, from Shung-Hsi Yu.
6) Clean up an unneeded check on existence of SSE2 in BPF x86-64 JIT,
from Jie Meng.
7) Fix various ASAN bugs in both libbpf and selftests when running
the BPF selftest suite on arm64, from Xu Kuohai.
8) Fix missing bpf_iter_vma_offset__destroy() call in BPF iter selftest
and use in-skeleton link pointer to remove an explicit bpf_link__destroy(),
from Jiri Olsa.
9) Fix BPF CI breakage by pointing to iptables-legacy instead of relying
on symlinked iptables which got upgraded to iptables-nft,
from Martin KaFai Lau.
10) Minor BPF selftest improvements all over the place, from various others.
* tag 'for-netdev' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (33 commits)
bpf/docs: Update README for most recent vmtest.sh
bpf: Use rcu_trace_implies_rcu_gp() for program array freeing
bpf: Use rcu_trace_implies_rcu_gp() in local storage map
bpf: Use rcu_trace_implies_rcu_gp() in bpf memory allocator
rcu-tasks: Provide rcu_trace_implies_rcu_gp()
selftests/bpf: Use sys_pidfd_open() helper when possible
libbpf: Fix null-pointer dereference in find_prog_by_sec_insn()
libbpf: Deal with section with no data gracefully
libbpf: Use elf_getshdrnum() instead of e_shnum
selftest/bpf: Fix error usage of ASSERT_OK in xdp_adjust_tail.c
selftests/bpf: Fix error failure of case test_xdp_adjust_tail_grow
selftest/bpf: Fix memory leak in kprobe_multi_test
selftests/bpf: Fix memory leak caused by not destroying skeleton
libbpf: Fix memory leak in parse_usdt_arg()
libbpf: Fix use-after-free in btf_dump_name_dups
selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test
selftests/bpf: Alphabetize DENYLISTs
selftests/bpf: Add tests for _opts variants of bpf_*_get_fd_by_id()
libbpf: Introduce bpf_link_get_fd_by_id_opts()
libbpf: Introduce bpf_btf_get_fd_by_id_opts()
...
====================
Link: https://lore.kernel.org/r/20221018210631.11211-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
commit 95c104c378dc ("tracing: Auto generate event name when creating a
group of events") changed the syntax in the ftrace README file which is
used by the selftests to check what features are support. Adjust the
string to make test_duplicates.tc and trigger-synthetic-eprobe.tc work
again.
Fixes: 95c104c378dc ("tracing: Auto generate event name when creating a group of events")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Remove the redundant warning information of online_all_offline_memory()
since there is a warning in online_memory_expect_success().
Signed-off-by: Zhao Gongyi <zhaogongyi@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Handle the scenario where the build is launched with the ARCH envvar
defined as x86_64.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Handle the scenario where the build is launched with the ARCH envvar
defined as x86_64.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Don't use the test-specific header files as source files to force a
target dependency, as clang will complain if more than one source file
is used for a compile command with a single '-o' flag.
Use the proper Makefile variables instead as defined in
tools/testing/selftests/lib.mk.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Since commit 40b09653b197 ("selftests/bpf: Adjust vmtest.sh to use local
kernel configuration") the vmtest.sh script no longer downloads a kernel
configuration but uses the local, in-repository one.
This change updates the README, which still mentions the old behavior.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221017232458.1272762-1-deso@posteo.net
|
|
It should trigger a WARN_ON_ONCE in btf_type_id_size.
btf_func_proto_check kernel/bpf/btf.c:4447 [inline]
btf_check_all_types kernel/bpf/btf.c:4723 [inline]
btf_parse_type_sec kernel/bpf/btf.c:4752 [inline]
btf_parse kernel/bpf/btf.c:5026 [inline]
btf_new_fd+0x1926/0x1e70 kernel/bpf/btf.c:6892
bpf_btf_load kernel/bpf/syscall.c:4324 [inline]
__sys_bpf+0xb7d/0x4cf0 kernel/bpf/syscall.c:5010
__do_sys_bpf kernel/bpf/syscall.c:5069 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5067 [inline]
__x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:5067
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Cc: Yonghong Song <yhs@fb.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221015002444.2680969-1-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a SIGTRAP stress test that exercises repeatedly enabling/disabling
an event while it concurrently keeps firing.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/Y0E3uG7jOywn7vy3@elver.google.com/
|
|
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels
when using bperf (perf BPF based counters) with cgroups.
- Support HiSilicon PCIe Performance Monitoring Unit (PMU), that
monitors bandwidth, latency, bus utilization and buffer occupancy.
Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst.
- User space tasks can migrate between CPUs, so when tracing selected
CPUs, system-wide sideband is still needed, fix it in the setup of
Intel PT on hybrid systems.
- Fix metricgroups title message in 'perf list', it should state that
the metrics groups are to be used with the '-M' option, not '-e'.
- Sync the msr-index.h copy with the kernel sources, adding support for
using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well
as decoding it when printing the MSR tracepoint arguments.
- Fix program header size and alignment when generating a JIT ELF in
'perf inject'.
- Add multiple new Intel PT 'perf test' entries, including a jitdump
one.
- Fix the 'perf test' entries for 'perf stat' CSV and JSON output when
running on PowerPC due to an invalid topology number in that arch.
- Fix the 'perf test' for arm_coresight failures on the ARM Juno
system.
- Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this
option to the or expression expected in the intercepted
perf_event_open() syscall.
- Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the
'perf annotate' asm parser.
- Fix 'perf mem record -C' option processing, it was being chopped up
when preparing the underlying 'perf record -e mem-events' and thus
being ignored, requiring using '-- -C CPUs' as a workaround.
- Improvements and tidy ups for 'perf test' shell infra.
- Fix Intel PT information printing segfault in uClibc, where a NULL
format was being passed to fprintf.
* tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet
perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver
perf auxtrace arm: Refactor event list iteration in auxtrace_record__init()
perf tests stat+json_output: Include sanity check for topology
perf tests stat+csv_output: Include sanity check for topology
perf intel-pt: Fix system_wide dummy event for hybrid
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
perf test: Fix attr tests for PERF_FORMAT_LOST
perf test: test_intel_pt.sh: Add 9 tests
perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
perf test: test_intel_pt.sh: Add jitdump test
perf test: test_intel_pt.sh: Tidy some alignment
perf test: test_intel_pt.sh: Print a message when skipping kernel tracing
perf test: test_intel_pt.sh: Tidy some perf record options
perf test: test_intel_pt.sh: Fix return checking again
perf: Skip and warn on unknown format 'configN' attrs
perf list: Fix metricgroups title message
perf mem: Fix -C option behavior for perf mem record
perf annotate: Add missing condition flags for arm64
...
|
|
To pick up the changes in:
b8d1d163604bd1e6 ("x86/apic: Don't disable x2APIC if locked")
ca5b7c0d9621702e ("perf/x86/amd/lbr: Add LbrExtV2 branch record support")
Addressing these tools/perf build warnings:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2022-10-14 18:06:34.294561729 -0300
+++ after 2022-10-14 18:06:41.285744044 -0300
@@ -264,6 +264,7 @@
[0xc0000102 - x86_64_specific_MSRs_offset] = "KERNEL_GS_BASE",
[0xc0000103 - x86_64_specific_MSRs_offset] = "TSC_AUX",
[0xc0000104 - x86_64_specific_MSRs_offset] = "AMD64_TSC_RATIO",
+ [0xc000010e - x86_64_specific_MSRs_offset] = "AMD64_LBR_SELECT",
[0xc000010f - x86_64_specific_MSRs_offset] = "AMD_DBG_EXTN_CFG",
[0xc0000300 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS",
[0xc0000301 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_CTL",
$
Now one can trace systemwide asking to see backtraces to where that MSR
is being read/written, see this example with a previous update:
# perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
^C#
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
Using CPUID AuthenticAMD-25-21-0
0x6a0
0x6a8
New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
0x6a0
0x6a8
New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
mmap size 528384B
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/lkml/Y0nQkz2TUJxwfXJd@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
Jakub Kicinski
Linus Torvalds
Aaron Conole
Victor Nogueira
Shang XiaoJing
Adrian Hunter
Arnaldo Carvalho de Melo
Namhyung Kim
Thomas Richter
Ian Rogers
Kajol Jain
Kuniyuki Iwashima
Paolo Bonzini
Benjamin Poirier
Daniel Bristot de Oliveira
Paul Blakey
Ido Schimmel
Sven Schnelle
Zhao Gongyi
Ricardo Cañuelo
Daniel Müller
Stanislav Fomichev
Marco Elver