From 7af4c8451d80d0a8622483c27ab141a7c1a94573 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Tue, 12 May 2020 23:10:56 +0200 Subject: dt-bindings: net: meson-dwmac: Add the amlogic,rx-delay-ns property The PRG_ETHERNET registers on Meson8b and newer SoCs can add an RX delay. Add a property with the known supported values so it can be configured according to the board layout. Reviewed-by: Andrew Lunn Signed-off-by: Martin Blumenstingl Signed-off-by: David S. Miller --- .../devicetree/bindings/net/amlogic,meson-dwmac.yaml | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index ae91aa9d8616..66074314e57a 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -67,6 +67,19 @@ allOf: PHY and MAC are adding a delay). Any configuration is ignored when the phy-mode is set to "rmii". + amlogic,rx-delay-ns: + enum: + - 0 + - 2 + default: 0 + description: + The internal RGMII RX clock delay (provided by this IP block) in + nanoseconds. When phy-mode is set to "rgmii" then the RX delay + should be explicitly configured. When the phy-mode is set to + either "rgmii-id" or "rgmii-rxid" the RX clock delay is already + provided by the PHY. Any configuration is ignored when the + phy-mode is set to "rmii". + properties: compatible: additionalItems: true -- cgit v1.2.3-59-g8ed1b