From 7d3ba9360c6dac7c077fbd6631e08f32ea2bcd53 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 9 Sep 2020 14:43:14 +0900 Subject: net: phy: call phy_disable_interrupts() in phy_attach_direct() instead Since the micrel phy driver calls phy_init_hw() as a workaround, the commit 9886a4dbd2aa ("net: phy: call phy_disable_interrupts() in phy_init_hw()") disables the interrupt unexpectedly. So, call phy_disable_interrupts() in phy_attach_direct() instead. Otherwise, the phy cannot link up after the ethernet cable was disconnected. Note that other drivers (like at803x.c) also calls phy_init_hw(). So, perhaps, the driver caused a similar issue too. Fixes: 9886a4dbd2aa ("net: phy: call phy_disable_interrupts() in phy_init_hw()") Signed-off-by: Yoshihiro Shimoda Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 8adfbad0a1e8..b93b40cda54a 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1143,10 +1143,6 @@ int phy_init_hw(struct phy_device *phydev) if (ret < 0) return ret; - ret = phy_disable_interrupts(phydev); - if (ret) - return ret; - if (phydev->drv->config_init) ret = phydev->drv->config_init(phydev); @@ -1423,6 +1419,10 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, if (err) goto error; + err = phy_disable_interrupts(phydev); + if (err) + return err; + phy_resume(phydev); phy_led_triggers_register(phydev); -- cgit v1.2.3-59-g8ed1b