From d4d0ad57b3865795c4cde2fb5094c594c2e8f469 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 13 May 2021 11:51:41 +0200 Subject: vgacon: Record video mode changes with VT_RESIZEX Fix an issue with VGA console font size changes made after the initial video text mode has been changed with a user tool like `svgatextmode' calling the VT_RESIZEX ioctl. As it stands in that case the original screen geometry continues being used to validate further VT resizing. Consequently when the video adapter is firstly reprogrammed from the original say 80x25 text mode using a 9x16 character cell (720x400 pixel resolution) to say 80x37 text mode and the same character cell (720x592 pixel resolution), and secondly the CRTC character cell updated to 9x8 (by loading a suitable font with the KD_FONT_OP_SET request of the KDFONTOP ioctl), the VT geometry does not get further updated from 80x37 and only upper half of the screen is used for the VT, with the lower half showing rubbish corresponding to whatever happens to be there in the video memory that maps to that part of the screen. Of course the proportions change according to text mode geometries and font sizes chosen. Address the problem then, by updating the text mode geometry defaults rather than checking against them whenever the VT is resized via a user ioctl. Signed-off-by: Maciej W. Rozycki Fixes: e400b6ec4ede ("vt/vgacon: Check if screen resize request comes from userspace") Cc: stable@vger.kernel.org # v2.6.24+ Signed-off-by: Linus Torvalds --- drivers/video/console/vgacon.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 962c12be9774..511e7d06b148 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -1089,12 +1089,20 @@ static int vgacon_resize(struct vc_data *c, unsigned int width, if ((width << 1) * height > vga_vram_size) return -EINVAL; + if (user) { + /* + * Ho ho! Someone (svgatextmode, eh?) may have reprogrammed + * the video mode! Set the new defaults then and go away. + */ + screen_info.orig_video_cols = width; + screen_info.orig_video_lines = height; + vga_default_font_height = c->vc_font.height; + return 0; + } if (width % 2 || width > screen_info.orig_video_cols || height > (screen_info.orig_video_lines * vga_default_font_height)/ c->vc_font.height) - /* let svgatextmode tinker with video timings and - return success */ - return (user) ? 0 : -EINVAL; + return -EINVAL; if (con_is_visible(c) && !vga_is_gfx) /* who knows */ vgacon_doresize(c, width, height); -- cgit v1.2.3-59-g8ed1b From a90c275eb144c1b755f04769e1f29d832d6daeaf Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 13 May 2021 11:51:45 +0200 Subject: vt_ioctl: Revert VT_RESIZEX parameter handling removal Revert the removal of code handling extra VT_RESIZEX ioctl's parameters beyond those that VT_RESIZE supports, fixing a functional regression causing `svgatextmode' not to resize the VT anymore. As a consequence of the reverted change when the video adapter is reprogrammed from the original say 80x25 text mode using a 9x16 character cell (720x400 pixel resolution) to say 80x37 text mode and the same character cell (720x592 pixel resolution), the VT geometry does not get updated and only upper two thirds of the screen are used for the VT, and the lower part remains blank. The proportions change according to text mode geometries chosen. Revert the change verbatim then, bringing back previous VT resizing. Signed-off-by: Maciej W. Rozycki Fixes: 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Linus Torvalds --- drivers/tty/vt/vt_ioctl.c | 57 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 47 insertions(+), 10 deletions(-) diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 89aeaf3c1bca..95d10197566b 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -671,21 +671,58 @@ static int vt_resizex(struct vc_data *vc, struct vt_consize __user *cs) if (copy_from_user(&v, cs, sizeof(struct vt_consize))) return -EFAULT; - if (v.v_vlin) - pr_info_once("\"struct vt_consize\"->v_vlin is ignored. Please report if you need this.\n"); - if (v.v_clin) - pr_info_once("\"struct vt_consize\"->v_clin is ignored. Please report if you need this.\n"); + /* FIXME: Should check the copies properly */ + if (!v.v_vlin) + v.v_vlin = vc->vc_scan_lines; + + if (v.v_clin) { + int rows = v.v_vlin / v.v_clin; + if (v.v_rows != rows) { + if (v.v_rows) /* Parameters don't add up */ + return -EINVAL; + v.v_rows = rows; + } + } + + if (v.v_vcol && v.v_ccol) { + int cols = v.v_vcol / v.v_ccol; + if (v.v_cols != cols) { + if (v.v_cols) + return -EINVAL; + v.v_cols = cols; + } + } + + if (v.v_clin > 32) + return -EINVAL; - console_lock(); for (i = 0; i < MAX_NR_CONSOLES; i++) { - vc = vc_cons[i].d; + struct vc_data *vcp; - if (vc) { - vc->vc_resize_user = 1; - vc_resize(vc, v.v_cols, v.v_rows); + if (!vc_cons[i].d) + continue; + console_lock(); + vcp = vc_cons[i].d; + if (vcp) { + int ret; + int save_scan_lines = vcp->vc_scan_lines; + int save_font_height = vcp->vc_font.height; + + if (v.v_vlin) + vcp->vc_scan_lines = v.v_vlin; + if (v.v_clin) + vcp->vc_font.height = v.v_clin; + vcp->vc_resize_user = 1; + ret = vc_resize(vcp, v.v_cols, v.v_rows); + if (ret) { + vcp->vc_scan_lines = save_scan_lines; + vcp->vc_font.height = save_font_height; + console_unlock(); + return ret; + } } + console_unlock(); } - console_unlock(); return 0; } -- cgit v1.2.3-59-g8ed1b From 860dafa902595fb5f1d23bbcce1215188c3341e6 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 13 May 2021 11:51:50 +0200 Subject: vt: Fix character height handling with VT_RESIZEX Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds --- drivers/tty/vt/vt_ioctl.c | 6 +++--- drivers/video/console/vgacon.c | 44 +++++++++++++++++++++--------------------- include/linux/console_struct.h | 1 + 3 files changed, 26 insertions(+), 25 deletions(-) diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 95d10197566b..0e0cd9e9e589 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -706,17 +706,17 @@ static int vt_resizex(struct vc_data *vc, struct vt_consize __user *cs) if (vcp) { int ret; int save_scan_lines = vcp->vc_scan_lines; - int save_font_height = vcp->vc_font.height; + int save_cell_height = vcp->vc_cell_height; if (v.v_vlin) vcp->vc_scan_lines = v.v_vlin; if (v.v_clin) - vcp->vc_font.height = v.v_clin; + vcp->vc_cell_height = v.v_clin; vcp->vc_resize_user = 1; ret = vc_resize(vcp, v.v_cols, v.v_rows); if (ret) { vcp->vc_scan_lines = save_scan_lines; - vcp->vc_font.height = save_font_height; + vcp->vc_cell_height = save_cell_height; console_unlock(); return ret; } diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 511e7d06b148..631eb918f8e1 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -383,7 +383,7 @@ static void vgacon_init(struct vc_data *c, int init) vc_resize(c, vga_video_num_columns, vga_video_num_lines); c->vc_scan_lines = vga_scan_lines; - c->vc_font.height = vga_video_font_height; + c->vc_font.height = c->vc_cell_height = vga_video_font_height; c->vc_complement_mask = 0x7700; if (vga_512_chars) c->vc_hi_font_mask = 0x0800; @@ -518,32 +518,32 @@ static void vgacon_cursor(struct vc_data *c, int mode) switch (CUR_SIZE(c->vc_cursor_type)) { case CUR_UNDERLINE: vgacon_set_cursor_size(c->state.x, - c->vc_font.height - - (c->vc_font.height < + c->vc_cell_height - + (c->vc_cell_height < 10 ? 2 : 3), - c->vc_font.height - - (c->vc_font.height < + c->vc_cell_height - + (c->vc_cell_height < 10 ? 1 : 2)); break; case CUR_TWO_THIRDS: vgacon_set_cursor_size(c->state.x, - c->vc_font.height / 3, - c->vc_font.height - - (c->vc_font.height < + c->vc_cell_height / 3, + c->vc_cell_height - + (c->vc_cell_height < 10 ? 1 : 2)); break; case CUR_LOWER_THIRD: vgacon_set_cursor_size(c->state.x, - (c->vc_font.height * 2) / 3, - c->vc_font.height - - (c->vc_font.height < + (c->vc_cell_height * 2) / 3, + c->vc_cell_height - + (c->vc_cell_height < 10 ? 1 : 2)); break; case CUR_LOWER_HALF: vgacon_set_cursor_size(c->state.x, - c->vc_font.height / 2, - c->vc_font.height - - (c->vc_font.height < + c->vc_cell_height / 2, + c->vc_cell_height - + (c->vc_cell_height < 10 ? 1 : 2)); break; case CUR_NONE: @@ -554,7 +554,7 @@ static void vgacon_cursor(struct vc_data *c, int mode) break; default: vgacon_set_cursor_size(c->state.x, 1, - c->vc_font.height); + c->vc_cell_height); break; } break; @@ -565,13 +565,13 @@ static int vgacon_doresize(struct vc_data *c, unsigned int width, unsigned int height) { unsigned long flags; - unsigned int scanlines = height * c->vc_font.height; + unsigned int scanlines = height * c->vc_cell_height; u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan; raw_spin_lock_irqsave(&vga_lock, flags); vgacon_xres = width * VGA_FONTWIDTH; - vgacon_yres = height * c->vc_font.height; + vgacon_yres = height * c->vc_cell_height; if (vga_video_type >= VIDEO_TYPE_VGAC) { outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg); max_scan = inb_p(vga_video_port_val); @@ -626,9 +626,9 @@ static int vgacon_doresize(struct vc_data *c, static int vgacon_switch(struct vc_data *c) { int x = c->vc_cols * VGA_FONTWIDTH; - int y = c->vc_rows * c->vc_font.height; + int y = c->vc_rows * c->vc_cell_height; int rows = screen_info.orig_video_lines * vga_default_font_height/ - c->vc_font.height; + c->vc_cell_height; /* * We need to save screen size here as it's the only way * we can spot the screen has been resized and we need to @@ -1041,7 +1041,7 @@ static int vgacon_adjust_height(struct vc_data *vc, unsigned fontheight) cursor_size_lastto = 0; c->vc_sw->con_cursor(c, CM_DRAW); } - c->vc_font.height = fontheight; + c->vc_font.height = c->vc_cell_height = fontheight; vc_resize(c, 0, rows); /* Adjust console size */ } } @@ -1096,12 +1096,12 @@ static int vgacon_resize(struct vc_data *c, unsigned int width, */ screen_info.orig_video_cols = width; screen_info.orig_video_lines = height; - vga_default_font_height = c->vc_font.height; + vga_default_font_height = c->vc_cell_height; return 0; } if (width % 2 || width > screen_info.orig_video_cols || height > (screen_info.orig_video_lines * vga_default_font_height)/ - c->vc_font.height) + c->vc_cell_height) return -EINVAL; if (con_is_visible(c) && !vga_is_gfx) /* who knows */ diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h index 153734816b49..d5b9c8d40c18 100644 --- a/include/linux/console_struct.h +++ b/include/linux/console_struct.h @@ -101,6 +101,7 @@ struct vc_data { unsigned int vc_rows; unsigned int vc_size_row; /* Bytes per row */ unsigned int vc_scan_lines; /* # of scan lines */ + unsigned int vc_cell_height; /* CRTC character cell height */ unsigned long vc_origin; /* [!] Start of real screen */ unsigned long vc_scr_end; /* [!] End of real screen */ unsigned long vc_visible_origin; /* [!] Top of visible window */ -- cgit v1.2.3-59-g8ed1b