From 75de5546100e27a88e8d13067a4335f61d334ba2 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sun, 22 Jan 2017 19:32:25 +0100 Subject: Documentation: dt: iio: imu: st_lsm6dsx: add st,drdy-int-pin property Add st,drdy-int-pin property to select interrupt pin of the package Signed-off-by: Lorenzo Bianconi Acked-by: Rob Herring Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree/bindings/iio/imu') diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt index ed3cdac00f13..cf81afdf7803 100644 --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -7,6 +7,8 @@ Required properties: - reg: i2c address of the sensor / spi cs line Optional properties: +- st,drdy-int-pin: the pin on the package that will be used to signal + "data ready" (valid values: 1 or 2). - interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING. -- cgit v1.2.3-59-g8ed1b