From ae94cafe293343c2680c638c7af8499d708e4d71 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 18 Mar 2014 10:46:37 +0100 Subject: mmc: mmci: Add DT bindings for signal direction Some variants have support for indicating the bus signal directions, which currently are configured through platform data. Add corresponding DT bindings to enable us to move away from using the platform data. Signed-off-by: Ulf Hansson Reviewed-by: Linus Walleij --- Documentation/devicetree/bindings/mmc/mmci.txt | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/mmc/mmci.txt') diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt index ff233d1eb190..9bd2ffa704a7 100644 --- a/Documentation/devicetree/bindings/mmc/mmci.txt +++ b/Documentation/devicetree/bindings/mmc/mmci.txt @@ -4,7 +4,8 @@ The ARM PrimeCell MMCI PL180 and PL181 provides an interface for reading and writing to MultiMedia and SD cards alike. This file documents differences between the core properties described -by mmc.txt and the properties used by the mmci driver. +by mmc.txt and the properties used by the mmci driver. Using "st" as +the prefix for a property, indicates support by the ST Micro variant. Required properties: - compatible : contains "arm,pl18x", "arm,primecell". @@ -18,6 +19,11 @@ Optional properties: - mmc-cap-sd-highspeed : indicates whether SD is high speed capable. - vqmmc-supply : phandle to the regulator device tree node, mentioned as the VCCQ/VDD_IO supply in the eMMC/SD specs. +- st,sig-dir-dat0 : bus signal direction pin used for DAT[0]. +- st,sig-dir-dat2 : bus signal direction pin used for DAT[2]. +- st,sig-dir-dat31 : bus signal direction pin used for DAT[3] and DAT[1]. +- st,sig-dir-dat74 : bus signal direction pin used for DAT[4] to DAT[7]. +- st,sig-dir-cmd : cmd signal direction pin used for CMD. Example: @@ -38,6 +44,9 @@ sdi0_per1@80126000 { mmc-cap-sd-highspeed; mmc-cap-mmc-highspeed; cd-gpios = <&gpio2 31 0x4>; // 95 + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-cmd; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; -- cgit v1.2.3-59-g8ed1b