From e777a5bd98c689f1ee15ebdbce739497e7d92f70 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Feb 2020 07:02:50 +0100 Subject: docs: kvm: convert devices/vcpu.txt to ReST - Use title markups; - adjust indentation and add blank lines as needed; - adjust tables to match ReST accepted formats; - use :field: markups; - mark code blocks as such. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Paolo Bonzini --- Documentation/virt/kvm/devices/index.rst | 1 + Documentation/virt/kvm/devices/vcpu.rst | 114 +++++++++++++++++++++++++++++++ Documentation/virt/kvm/devices/vcpu.txt | 76 --------------------- 3 files changed, 115 insertions(+), 76 deletions(-) create mode 100644 Documentation/virt/kvm/devices/vcpu.rst delete mode 100644 Documentation/virt/kvm/devices/vcpu.txt (limited to 'Documentation/virt') diff --git a/Documentation/virt/kvm/devices/index.rst b/Documentation/virt/kvm/devices/index.rst index e6caccc36623..5a61838f0e61 100644 --- a/Documentation/virt/kvm/devices/index.rst +++ b/Documentation/virt/kvm/devices/index.rst @@ -12,3 +12,4 @@ Devices arm-vgic-v3 mpic s390_flic + vcpu diff --git a/Documentation/virt/kvm/devices/vcpu.rst b/Documentation/virt/kvm/devices/vcpu.rst new file mode 100644 index 000000000000..9963e680770a --- /dev/null +++ b/Documentation/virt/kvm/devices/vcpu.rst @@ -0,0 +1,114 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== +Generic vcpu interface +====================== + +The virtual cpu "device" also accepts the ioctls KVM_SET_DEVICE_ATTR, +KVM_GET_DEVICE_ATTR, and KVM_HAS_DEVICE_ATTR. The interface uses the same struct +kvm_device_attr as other devices, but targets VCPU-wide settings and controls. + +The groups and attributes per virtual cpu, if any, are architecture specific. + +1. GROUP: KVM_ARM_VCPU_PMU_V3_CTRL +================================== + +:Architectures: ARM64 + +1.1. ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_IRQ +--------------------------------------- + +:Parameters: in kvm_device_attr.addr the address for PMU overflow interrupt is a + pointer to an int + +Returns: + + ======= ======================================================== + -EBUSY The PMU overflow interrupt is already set + -ENXIO The overflow interrupt not set when attempting to get it + -ENODEV PMUv3 not supported + -EINVAL Invalid PMU overflow interrupt number supplied or + trying to set the IRQ number without using an in-kernel + irqchip. + ======= ======================================================== + +A value describing the PMUv3 (Performance Monitor Unit v3) overflow interrupt +number for this vcpu. This interrupt could be a PPI or SPI, but the interrupt +type must be same for each vcpu. As a PPI, the interrupt number is the same for +all vcpus, while as an SPI it must be a separate number per vcpu. + +1.2 ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_INIT +--------------------------------------- + +:Parameters: no additional parameter in kvm_device_attr.addr + +Returns: + + ======= ====================================================== + -ENODEV PMUv3 not supported or GIC not initialized + -ENXIO PMUv3 not properly configured or in-kernel irqchip not + configured as required prior to calling this attribute + -EBUSY PMUv3 already initialized + ======= ====================================================== + +Request the initialization of the PMUv3. If using the PMUv3 with an in-kernel +virtual GIC implementation, this must be done after initializing the in-kernel +irqchip. + + +2. GROUP: KVM_ARM_VCPU_TIMER_CTRL +================================= + +:Architectures: ARM, ARM64 + +2.1. ATTRIBUTES: KVM_ARM_VCPU_TIMER_IRQ_VTIMER, KVM_ARM_VCPU_TIMER_IRQ_PTIMER +----------------------------------------------------------------------------- + +:Parameters: in kvm_device_attr.addr the address for the timer interrupt is a + pointer to an int + +Returns: + + ======= ================================= + -EINVAL Invalid timer interrupt number + -EBUSY One or more VCPUs has already run + ======= ================================= + +A value describing the architected timer interrupt number when connected to an +in-kernel virtual GIC. These must be a PPI (16 <= intid < 32). Setting the +attribute overrides the default values (see below). + +============================= ========================================== +KVM_ARM_VCPU_TIMER_IRQ_VTIMER The EL1 virtual timer intid (default: 27) +KVM_ARM_VCPU_TIMER_IRQ_PTIMER The EL1 physical timer intid (default: 30) +============================= ========================================== + +Setting the same PPI for different timers will prevent the VCPUs from running. +Setting the interrupt number on a VCPU configures all VCPUs created at that +time to use the number provided for a given timer, overwriting any previously +configured values on other VCPUs. Userspace should configure the interrupt +numbers on at least one VCPU after creating all VCPUs and before running any +VCPUs. + +3. GROUP: KVM_ARM_VCPU_PVTIME_CTRL +================================== + +:Architectures: ARM64 + +3.1 ATTRIBUTE: KVM_ARM_VCPU_PVTIME_IPA +-------------------------------------- + +:Parameters: 64-bit base address + +Returns: + + ======= ====================================== + -ENXIO Stolen time not implemented + -EEXIST Base address already set for this VCPU + -EINVAL Base address not 64 byte aligned + ======= ====================================== + +Specifies the base address of the stolen time structure for this VCPU. The +base address must be 64 byte aligned and exist within a valid guest memory +region. See Documentation/virt/kvm/arm/pvtime.txt for more information +including the layout of the stolen time structure. diff --git a/Documentation/virt/kvm/devices/vcpu.txt b/Documentation/virt/kvm/devices/vcpu.txt deleted file mode 100644 index 6f3bd64a05b0..000000000000 --- a/Documentation/virt/kvm/devices/vcpu.txt +++ /dev/null @@ -1,76 +0,0 @@ -Generic vcpu interface -==================================== - -The virtual cpu "device" also accepts the ioctls KVM_SET_DEVICE_ATTR, -KVM_GET_DEVICE_ATTR, and KVM_HAS_DEVICE_ATTR. The interface uses the same struct -kvm_device_attr as other devices, but targets VCPU-wide settings and controls. - -The groups and attributes per virtual cpu, if any, are architecture specific. - -1. GROUP: KVM_ARM_VCPU_PMU_V3_CTRL -Architectures: ARM64 - -1.1. ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_IRQ -Parameters: in kvm_device_attr.addr the address for PMU overflow interrupt is a - pointer to an int -Returns: -EBUSY: The PMU overflow interrupt is already set - -ENXIO: The overflow interrupt not set when attempting to get it - -ENODEV: PMUv3 not supported - -EINVAL: Invalid PMU overflow interrupt number supplied or - trying to set the IRQ number without using an in-kernel - irqchip. - -A value describing the PMUv3 (Performance Monitor Unit v3) overflow interrupt -number for this vcpu. This interrupt could be a PPI or SPI, but the interrupt -type must be same for each vcpu. As a PPI, the interrupt number is the same for -all vcpus, while as an SPI it must be a separate number per vcpu. - -1.2 ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_INIT -Parameters: no additional parameter in kvm_device_attr.addr -Returns: -ENODEV: PMUv3 not supported or GIC not initialized - -ENXIO: PMUv3 not properly configured or in-kernel irqchip not - configured as required prior to calling this attribute - -EBUSY: PMUv3 already initialized - -Request the initialization of the PMUv3. If using the PMUv3 with an in-kernel -virtual GIC implementation, this must be done after initializing the in-kernel -irqchip. - - -2. GROUP: KVM_ARM_VCPU_TIMER_CTRL -Architectures: ARM,ARM64 - -2.1. ATTRIBUTE: KVM_ARM_VCPU_TIMER_IRQ_VTIMER -2.2. ATTRIBUTE: KVM_ARM_VCPU_TIMER_IRQ_PTIMER -Parameters: in kvm_device_attr.addr the address for the timer interrupt is a - pointer to an int -Returns: -EINVAL: Invalid timer interrupt number - -EBUSY: One or more VCPUs has already run - -A value describing the architected timer interrupt number when connected to an -in-kernel virtual GIC. These must be a PPI (16 <= intid < 32). Setting the -attribute overrides the default values (see below). - -KVM_ARM_VCPU_TIMER_IRQ_VTIMER: The EL1 virtual timer intid (default: 27) -KVM_ARM_VCPU_TIMER_IRQ_PTIMER: The EL1 physical timer intid (default: 30) - -Setting the same PPI for different timers will prevent the VCPUs from running. -Setting the interrupt number on a VCPU configures all VCPUs created at that -time to use the number provided for a given timer, overwriting any previously -configured values on other VCPUs. Userspace should configure the interrupt -numbers on at least one VCPU after creating all VCPUs and before running any -VCPUs. - -3. GROUP: KVM_ARM_VCPU_PVTIME_CTRL -Architectures: ARM64 - -3.1 ATTRIBUTE: KVM_ARM_VCPU_PVTIME_IPA -Parameters: 64-bit base address -Returns: -ENXIO: Stolen time not implemented - -EEXIST: Base address already set for this VCPU - -EINVAL: Base address not 64 byte aligned - -Specifies the base address of the stolen time structure for this VCPU. The -base address must be 64 byte aligned and exist within a valid guest memory -region. See Documentation/virt/kvm/arm/pvtime.txt for more information -including the layout of the stolen time structure. -- cgit v1.2.3-59-g8ed1b