From a4ec431fbf6b9533d2bb21fa328d88c1436106cf Mon Sep 17 00:00:00 2001 From: William Breathitt Gray Date: Mon, 10 Apr 2023 09:45:16 -0400 Subject: counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value Support for 25-bit counter values was removed in commit 4aa3b75c7460 ("counter: 104-quad-8: Fix race condition between FLAG and CNTR reads"). Adjust the Kconfig description of CONFIG_104_QUAD_8 to remove reference of 25-bit counter values. Link: https://lore.kernel.org/r/20230410134516.102886-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray --- drivers/counter/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/counter') diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig index 4228be917038..3000816f8f95 100644 --- a/drivers/counter/Kconfig +++ b/drivers/counter/Kconfig @@ -21,9 +21,9 @@ config 104_QUAD_8 encoder counter/interface device family (104-QUAD-8, 104-QUAD-4). A counter's respective error flag may be cleared by performing a write - operation on the respective count value attribute. Although the - 104-QUAD-8 counters have a 25-bit range, only the lower 24 bits may be - set, either directly or via the counter's preset attribute. + operation on the respective count value attribute. The 104-QUAD-8 + counters may be set either directly or via the counter's preset + attribute. The base port addresses for the devices may be configured via the base array module parameter. The interrupt line numbers for the devices may -- cgit v1.2.3-59-g8ed1b